40" x 1" Axle Rod for Go-Karts
Asin: B076629BY5 | Ean: 0642222892867 | UPC: 642222892867
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: Monster Motion | Manufacturer: AlveyTech
Dimensions: 1.50 x 40.00 x 1.50 inches
See On Amazon Similar To 40 x 1 Axle Rod
#1
HYPER GO H16BM 1/16 RTR Brushless Fast RC Cars for Adults, Max 42mph Electric Off-Road RC Truck, High Speed RC Car 4WD Remote Control Car with 2 Lipo Batteries for Adult, Compatible with 3S Lipo
Asin: B0BBW1F5CV | Model: H16BM | PartNumber: H16BM
Application Of New Materials: After Many Violent Tests, The Material Developed For The Honeycomb Chassis Is Strong Enough To Withstand The Impact Of This Monster Truck. In Addition, We Also Added F/R Zinc Metal Reinforced Sheet For Impact Resistance. As Well As The Adjustable Pull Rod Of The Same Material As The Chassis, With The 2.1Kgf.Cm In Torque Force 3-Wire Servo, It Is Sufficient For Various Terrains. It Is Worth Mcentioning That We Have Improved The Battery And Equipped The Casing With Flame-Retardant Materials, Which Is More Secure.
Transmitter: 2.4Ghz 3-Channel Radio With Light Bar Control, 70% Throttle Limited Switch Great For Beginners.
Excellent Performance: Ideal For Big Jump, Popping Wheelie And Back Flipping Stunts, 2S 7.4V 1050 Mah 25C Rechargeable Lipo Battery And Brushless Motor Bursts Out At 27+ Mph (45 Kph) For Adults (Speed Measured By Gps).
Perfectly Compatible: Independent Smart 2S/3S 45A Esc Support The 3S-Capable Power System, Furious 42+ Mph (68 Kph) Speeds Achievable In Optimum Conditions Using A 3S Lipo Battery (3S 11.1V Lipo Battery And More Upgrade Accessories Available On Amazon).
Driving Quality: The Tire (Pre-Mounted Sponge Inserted) And Oil-Filled Absorbers Greatly Reduce The Shaking Of The Truck When Driving At High Speed. Calmly Deal With All Kinds Of Jumps And Stick To The Ground Firmly.
Durable And Efficient Transmission: Metal Gears And Metal Differential Better Distribute Power To Achieve A Perfect 4Wd, In Which The 5.5Mm Diameter Axle And M4 Nuts Contributed. The Smooth Effect Of 16 Ball Bearings Reduces Power Loss.
Features
- Brushless: Hobby 2845 4200KV, 4 pole high-torque motor with metal heatsink and cooling fans design. Independent receiver and 45A ESC make this car more potential and upgradeable
- Durable and Efficient Transmission: Metal gears and metal differential better distribute power to achieve a perfect 4WD, in which the 5.5MM diameter axle and M4 nuts contributed. The smooth effect of 16 ball bearings reduces power loss
- Application of new materials: After many violent tests, the material developed for the honeycomb chassis is strong enough to withstand the impact of this monster truck. In addition, we also added F/R zinc metal reinforced sheet for impact resistance. As well as the adjustable pull rod of the same material as the chassis, with the 2.1kgf.cm in torque force 3-wire servo, it is sufficient for various terrains. It is worth mcentioning that we have improved the battery and equipped the casing with flame-retardant materials, which is more secure
- Driving Quality: The tire (Pre-mounted sponge inserted) and oil-filled absorbers greatly reduce the shaking of the truck when driving at high speed. Calmly deal with all kinds of jumps and stick to the ground firmly
- Excellent Performance: Ideal for big jump, popping wheelie and back flipping stunts, 2S 7.4V 1050 mAh 25C rechargeable LiPo battery and brushless motor bursts out at 27+ mph (45 kph) for adults (speed measured by GPS)
- Perfectly Compatible: Independent smart 2S/3S 45A ESC support the 3S-capable power system, furious 42+ mph (68 kph) speeds achievable in optimum conditions using a 3S LiPo battery (3S 11.1V LiPo battery and more upgrade accessories available on Amazon)
- Transmitter: 2.4GHz 3-Channel Radio with light bar control, 70% throttle limited switch great for beginners
- See more on Amazon...
Brand: HYPER GO | Manufacturer: HYPER GO
Dimensions: 4.70 x 12.20 x 9.10 Inches | Weight: 3.62 Pounds
Warranty: 90 Day Warranty Against Manufacturer Defects
See On Amazon #2
Glarks 340-Pieces 6 Sizes 304 Stainless Steel Cotter Pin Clip Key Fastner Fitting Assortment Kit for Automotive, Mechanics, Car Garage, Power Equipment, Cars, Trucks, Lawn Mower, Small Engine Repair
Asin: B07HKFD29V | Ean: 0799862355501 | UPC: 799862355501
☆ 『Product Feature』: The Cotter Pin With Hair Pin Style Design Gives Fast And Secure Hold For Bolts And Pins, Specialty Locks To Ensure Tight Hold That Will Last Long..
☆ 『Application』: Widely Used For Automotive, Mechanics, Car Garage, Workshop, Power Equipment, Cars, Trucks, Lawn Mower And Etc..
☆ 『Easy To Use』: Place The Cotter Pin In The Hole, The Bulbous Head Will Stop The Pin From Moving All The Way Through, Bend The Open Tips To Secure In Place..
☆ 『Package Include』: 6 Size Of M1.6*25*100Pcs, M2.5*25*80Pcs, M2.5*40*60Pcs, M3.2*30*40Pcs, M3.2*40*30Pcs, M4*60*30Pcs Total 340Pcs In A Clear Box, Enough Quantity Can Meet Your Different Needs..
Features
- Product Material : All the cotter pins are made of 304 Stainless Steel, rust and corrosion resistant, durable and steady not easy to break.
- Package Include : 6 size of M1.6*25*100pcs, M2.5*25*80pcs, M2.5*40*60pcs, M3.2*30*40pcs, M3.2*40*30pcs, M4*60*30pcs total 340pcs in a clear box, enough quantity can meet your different needs.
- Product Feature : The cotter pin with hair pin style design gives fast and secure hold for bolts and pins, specialty locks to ensure tight hold that will last long.
- Easy to use : Place the cotter pin in the hole, the bulbous head will stop the pin from moving all the way through, bend the open tips to secure in place.
- Application : Widely used for automotive, mechanics, car garage, workshop, power equipment, cars, trucks, lawn mower and etc.
- See more on Amazon...
Brand: Glarks | Manufacturer: Glarks
See On Amazon #3
Camco Fasten XL Camper/RV Leveling Blocks - Features Interlocking Design for Customizable Height - Carrying Handle Twists to Secure Blocks for RV Storage - Measures 10.5 x 10.5 x 1 , 10-Pk (21026)
Asin: B07ZHNWMH2 | Model: 21026 | PartNumber: 21026 | Ean: 0014717210263 | UPC: 014717210263
Quad-Grid Extreme Load Bearing Design: Experience Superior Leveling With This Rv Essential. Each Xl Polymer Block Measures 10 1/2" X 10 1/2" X 1 1/2". Structurally Engineered For Maximum Stability, These Rv Stabilizer Blocks Are A Camper Must-Have..
Patented Design Made In The Usa: Get Superior Leveling Support With These Camco Leveling Blocks, Proudly Manufactured In The Usa. This Patented Rv Leveling Kit Is Built With Premium Materials For Unparalleled Durability..
Compatibility: Use Xl Camco Leveling Blocks With Single Wheels, Double Wheels, Hydraulic Jacks, Tongue Jacks, Stabilizer Jacks, Fifth Wheel Jacks, And Tandem Axles. For Best Results, Make Sure To Use A Stack Height Of 4 1/2" Or Less..
Premium Integrated Handle: Easily Carry And Transport These Camper Leveling Blocks With The Premium Integrated T-Handle. Just Lift The Handle To Carry And Twist It Down To Securely Lock The Camper Blocks Together For Storage..
Features
- AMERICA S #1 RV LEVELING BLOCKS: Choose FasTen XL interlocking leveling blocks to fit your RV's unique needs! These (10) gray camper leveling blocks by Camco stack to your desired height for customizable support.
- PREMIUM INTEGRATED HANDLE: Easily carry and transport these camper leveling blocks with the premium integrated T-handle. Just lift the handle to carry and twist it down to securely lock the camper blocks together for storage.
- QUAD-GRID EXTREME LOAD BEARING DESIGN: Experience superior leveling with this RV essential. Each XL polymer block measures 10 1/2 x 10 1/2 x 1 1/2. Structurally engineered for maximum stability, these RV stabilizer blocks are a camper must-have.
- COMPATIBILITY: Use XL Camco leveling blocks with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, fifth wheel jacks, and tandem axles. For best results, make sure to use a stack height of 4 1/2 or less.
- PATENTED DESIGN MADE IN THE USA: Get superior leveling support with these Camco leveling blocks, proudly manufactured in the USA. This patented RV leveling kit is built with premium materials for unparalleled durability.
- See more on Amazon...
Brand: Camco | Manufacturer: Camco
Dimensions: 11.20 x 11.42 x 11.42 inches | Weight: 13.95 Pounds
Warranty: Limited 1 Year
See On Amazon #4
3mirrors Aluminum Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 2X Connecting Rods
Asin: B08F9YBCL2 | Model: 1 | PartNumber: 1 | Ean: 7790262222014
This Grinder Head Main Body Is Very Light And Convenient, Only 87G. But Very Strong And Precise. All Holes Are Stationary, So We Can Set An Offset Compensation For Each Size Hole To Make Sure All Tungsten's Tip Center Is On The Grinding Center Point, This Offset Can Ensure That The Lines On The Tip Of The Tungsten Electrode Are As Straight As Possible. If The Hole Position Is Variable, Offset Compensation Cannot Be Set..
This Tool Is Essential For Real Professionals. We Know Welders, So We Know What They Need. Product Made Of Upgrade Aluminum Alloy Material, Cnc Finishing More Durable, There Will Be No Trouble Of High Temperature Melting. Please Note That The 3Mirrors Brand Is The Original Design. The Appearance Can Be Imitated But The Core Data Cannot. For Your Convenience, Please Avoid Purchasing Piracy. Any Questions, Contact Us For Professional Help!.
The Tungsten Sharpening Tool Also Has Tungsten Cut-Off Port Processing. After The Tungsten You Are Using Is Worn Or Contaminated, You Can Use The Cut-Off Port For Cutting So That You Can Use It Again. All Holes Are Designed At The Same Height For The Diamond Wheel. Needn't Set The Height Again And Again. Very Easy To Install And Use. Save Your Ready Time For Welding, Welders Deserve It!.
This Tool Will Grind 2 Sizes Tungsten, 2 Angles Tips For Each Size. 4 Types Holes 1/16" (1.6Mm) 15°, 1/16" (1.6Mm) 20°, 3/32" (2.4Mm) 15°, 3/32" (2.4Mm) 20°. 15° Is 30° When The Ground On Tips, 20° Is 40°. Each Type Has 3 Holes That Will Grind Different Circles On Diamond Wheels, Which Will Reduce Diamond Wheels Consumption By 2 Times..
Features
- The Tungsten Sharpener fits most all Rotary Tools with a 3/4-12 thread, compatible for Black and Decker, Milwaukee, Bosch Dremel and More! (***Package No Rotary Tool/No Drill Included).
- This tool will grind 2 sizes tungsten, 2 angles tips for each size. 4 types holes 1/16 (1.6mm) 15 , 1/16 (1.6mm) 20 , 3/32 (2.4mm) 15 , 3/32 (2.4mm) 20 . 15 is 30 when the ground on tips, 20 is 40 . Each type has 3 holes that will grind different circles on diamond wheels, which will reduce diamond wheels consumption by 2 times.
- This Grinder Head main body is very light and convenient, only 87g. But very strong and precise. All holes are stationary, so we can set an offset compensation for each size hole to make sure all tungsten's tip center is on the grinding center point, this offset can ensure that the lines on the tip of the tungsten electrode are as straight as possible. If the hole position is variable, offset compensation cannot be set.
- The tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or contaminated, you can use the cut-off port for cutting so that you can use it again. All holes are designed at the same height for the diamond wheel. Needn't set the height again and again. Very easy to install and use. Save your ready time for welding, Welders deserve it!
- This tool is essential for real professionals. We know welders, so we know what they need. Product made of Upgrade aluminum alloy material, CNC finishing more Durable, there will be no trouble of high temperature melting. Please note that the 3mirrors Brand is the Original Design. The appearance can be imitated but the core data cannot. For your convenience, please avoid purchasing piracy. Any questions, contact us for professional help!
- See more on Amazon...
Brand: 3mirrors | Manufacturer: 3mirrors
Dimensions: 2.36 x 1.69 x 1.69 inches
See On Amazon #5
YAKEFLY 25 ft 3/16 Copper Coated Brake Line Kit with 16 Fittings and 4 Unions Brake Line Fittings,Brake Line Double & Single Flaring Tool Kit,Fits for Most Hydraulic Braking Systems (Silver)
Asin: B0CHVXKS14 | Model: 674ZDGLTJ001 | PartNumber: 674ZDGLTJ001
[Bending And Opening] The Length Of The Copper Plated Brake Pipeline Is 25Ft, Which Has Perfect Flexibility, Is Easy To Manually Bend, And Is Also Easy To Expand With Simple Tools..
[Widely Used] The 3/16 Brake Pipeline Kit Can Be Applied To Most Hydraulic Brake Systems, Fuel Systems, And Transmission Systems. It Is Also Widely Applicable For Industrial, Household, And Commercial Purposes..
[Applicable] The 3/16 Brake Pipeline Kit Is Suitable For Most Hydraulic Brake Systems, Fuel Systems, And Transmission Systems. It Is Also Widely Applicable For Industrial, Household, And Commercial Purposes..
[Upgrade To 20 Accessories] ① 2 X 3/16 "(7/16-24) Inverted Pipe Nuts; ② 10 X 3/16" (3/8-24) Inverted Pipe Nuts; ③ 2 X 3/16 "(1/2-20) Inverted Pipe Nuts; ④ 2 X 3/116 "(9/16-18) Inverted Union; ⑤ 4 X 3/16" (3/8-24) Threaded Union..
Features
- [Material] The brake pipes are made of copper plated alloy, and all brake pipe accessories are made of high-quality brass to prevent rust and electroplating corrosion. Durable and durable, suitable for long-term use.
- [Upgrade to 20 Accessories] 2 x 3/16 (7/16-24) inverted pipe nuts; 10 x 3/16 (3/8-24) inverted pipe nuts; 2 x 3/16 (1/2-20) inverted pipe nuts; 2 x 3/116 (9/16-18) inverted union; 4 x 3/16 (3/8-24) threaded union.
- [Bending and Opening] The length of the copper plated brake pipeline is 25FT, which has perfect flexibility, is easy to manually bend, and is also easy to expand with simple tools.
- [Applicable] The 3/16 brake pipeline kit is suitable for most hydraulic brake systems, fuel systems, and transmission systems. It is also widely applicable for industrial, household, and commercial purposes.
- [Widely Used] The 3/16 brake pipeline kit can be applied to most hydraulic brake systems, fuel systems, and transmission systems. It is also widely applicable for industrial, household, and commercial purposes.
- See more on Amazon...
Brand: YAKEFLY | Manufacturer: YAKEFLY
See On Amazon #6
HELIFOUNER 100 Pieces 304 Stainless Steel Cotter Pin Assortment Kit
Asin: B0BD3ZFWG6 | Model: HELIFOUNER-Cotter-Pins | PartNumber: HELIFOUNER-Cotter-Pins | Ean: 0749355454129 | UPC: 749355454129
【Wide Applications】Widely Used In Automotive, Mechanics, Car Garage, Workshop, Power Equipment, Cars, Trucks, Lawn Mower, Small Engine Repair And Fastening, Etc..
【Package】M1.6×25 (25Pcs), M2.5×25 (25Pcs), M2.5×40 (15Pcs), M3.2×30 (15Pcs), M3.2×40 (10Pcs), M4×60 (10Pcs), 100Pcs In Total, Package In A Durable Transparent Box With Label. It Is Easy To Distinguish The Size Of The Product, You Can Choose The Suitable One To Meet All Your Needs..
【Unique Design】Cotter Pins Adopt Hair Pin Style Design, Which Can Quickly Fixed Bolt And Pins, Special Lock Can Ensure Its Tightness And Durability. When The Nut Is Tightened, Put Cotter Pins Into Nut Groove And The Tail Hole Of The Bolt, And Pull Off The Tail Of The Cotter Pin, Prevent The Relative Rotation Of The Nut And The Bolt That Can Complete Installation..
【Material】Made Of 304 Stainless Steel, Corrosion Resistant, Durable And Steady, Corrosion Resistance, And Anti-Rust, You Can Use It For A Long Time..
Features
- Sizes M1.6*25, M2.5*25, M2.5*40, M3.2*30, M3.2*40, M4*60. Total 6 frequently used sizes can meet your different needs.
- Material Made of 304 stainless steel, corrosion resistant, durable and steady, corrosion resistance, and anti-rust, you can use it for a long time.
- Wide Applications Widely used in automotive, mechanics, car garage, workshop, power equipment, cars, trucks, lawn mower, small engine repair and fastening, etc.
- Unique Design Cotter pins adopt hair pin style design, which can quickly fixed bolt and pins, special lock can ensure its tightness and durability. When the nut is tightened, put cotter pins into nut groove and the tail hole of the bolt, and pull off the tail of the cotter pin, prevent the relative rotation of the nut and the bolt that can complete installation.
- Package M1.6 25 (25pcs), M2.5 25 (25pcs), M2.5 40 (15pcs), M3.2 30 (15pcs), M3.2 40 (10pcs), M4 60 (10pcs), 100pcs in total, package in a durable transparent box with label. It is easy to distinguish the size of the product, you can choose the suitable one to meet all your needs.
- See more on Amazon...
Brand: HELIFOUNER | Manufacturer: HELIFOUNER
Dimensions: 0.70 x 6.00 x 4.20 inches
See On Amazon #7
Zlirfy CV Boot Clamps,CV Joint Boot Crimp Clamp Kit,5pcs Small and 5pcs Large,Car Accessories Adjustable Stainless Steel Drive Shaft CV Boot Clamp,Fits for Steering Gear Gaiters
Asin: B0CDBT8C6W | Model: 768BXGWXZDZ001 | PartNumber: 768BXGWXZDZ001
[Perfect Replacement] Loose Or Damaged Parts May Be Harmful To Your Car And Cause Grease Leakage, So New Parts Can Help Correct Any Problems. This Universal Adjustable Stainless Steel Transmission Shaft Can Perfectly Replace The Damaged Cv Dust Cover Of The Drive Shaft In Cars..
[Widely Applicable] Stainless Steel Adjustable Drive Shaft Dust Cover Fixture Is Suitable For Most Vehicles' Steering Gear Dust Covers And Fuel Hoses. They Help To Replace Damaged Drive Shaft Cv Dust Boot Clamps In Cars..
[Easy To Use] There Is A Strap That Goes Around The Boot, And Then A Part Of It Stands Up Like An Inverted U-Shape, While The Rest Of The Strap Is Clamped At The Other End Of The Strap To Form A Complete Loop. You Try To Tighten It As Tightly As Possible, Then Use Pliers To Clamp The U-Shape And Tighten It For The Rest Of The Process..
[High Quality Materials]The Cv Joint Fixture Is Made Of Very Durable Stainless Steel Material, Which Has Excellent Hardness And Corrosion Resistance. Even If Left In A Humid Environment For A Long Time, It Will Not Rust Or Damage. It Is Very Stable, Safe And Reliable, And Will Not Cause Any Damage To Your Vehicle..
Features
- [Package Includes] This set includes a set of 10 universal joint dust boot crimping clamps. The size of 5 small clips is 1.250 inches to 1.620 inches. Five large clips with dimensions ranging from 2.750 inches to 5.000 inches. The quantity is sufficient to meet all your daily needs.
- [High Quality Materials]The CV joint fixture is made of very durable stainless steel material, which has excellent hardness and corrosion resistance. Even if left in a humid environment for a long time, it will not rust or damage. It is very stable, safe and reliable, and will not cause any damage to your vehicle.
- [Perfect Replacement] Loose or damaged parts may be harmful to your car and cause grease leakage, so new parts can help correct any problems. This universal adjustable stainless steel transmission shaft can perfectly replace the damaged CV dust cover of the drive shaft in cars.
- [Easy to Use] There is a strap that goes around the boot, and then a part of it stands up like an inverted U-shape, while the rest of the strap is clamped at the other end of the strap to form a complete loop. You try to tighten it as tightly as possible, then use pliers to clamp the U-shape and tighten it for the rest of the process.
- [Widely Applicable] Stainless steel adjustable drive shaft dust cover fixture is suitable for most vehicles' steering gear dust covers and fuel hoses. They help to replace damaged drive shaft CV dust boot clamps in cars.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
See On Amazon #8
LivTee Motorcycle Side Mount License Plate Bracket Compatible with Harley Made Aluminum Alloy for Most Bike Motorcycle
Asin: B0CB4F3WXR
Size: Plate Holder: 7"X 4" (18X10cm). Tail Light Bracket: 2,5"X 3" (6X8cm). Axle Mounting Hole: 0.75" (2Cm).
Enjoy Warranty: You Will Get Quality Products, If You Have Any Questions, Please Contact Us, We Are Always Waiting For You Here..
Package Include: 1 X License Plate Bracket, Fixing X 2, Mounting Screws X 4, Hexagonal Nuts X 4, Washer X 4 Included..
Installation：Allows The License Plate To Be Mounted Horizontally Or Vertically On Either The Left Or Right Side Of The Bike By Bolting It Together Using The Precut Mounting Holes In The Bracket..
Features
- Material: Made of high quality aluminum alloy, durable, rust and corrosion resistant.
- Installation Allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the precut mounting holes in the bracket.
- Size: Plate holder: 7x 4 (18x10cm). Tail light bracket: 2,5x 3 (6x8cm). Axle mounting Hole: 0.75 (2cm)
- Package Include: 1 X License Plate Bracket, Fixing X 2, Mounting Screws X 4, Hexagonal nuts X 4, Washer X 4 Included.
- Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
See On Amazon #9
RACOONA 4PCS Caliper Hanger,Brake Caliper Hanger,Car Accessories Brake Caliper Hooks with Rubber Tips,Durable Brake Caliper Hangers Hooks,Automotive Tool for Braking,Bearing (Blue)
Asin: B0CGHHFBRL | Model: 835SCFBGG002 | PartNumber: 835SCFBGG002
[Rubber Protective Cap] Each Brake Caliper Hook Has A Rubber Coated Reminder At Both Ends, Which Can Effectively Prevent Scratches On Painted Suspension Components, Securely Secure The Brake Caliper, And Reduce Possible Damage To The Brake Hose..
[Widely Applicable] Our Brake Caliper Hanger Has Super Strong Load-Bearing Capacity, Is Safe And Reliable, And Can Support Most Vehicles On The Caliper. Suitable For Various Automotive Tasks, Such As Tasks Related To Brake, Wheel Bearing, Axle, And Suspension Maintenance..
[Function] If You Are Replacing Brakes, Bearings, Axles, Etc., Our Hook Tool Can Easily Hang The Caliper On One Side, Which Has A Good Protective Effect On Your Caliper, Brake Hoses, And Other Parts, Improving Your Work Efficiency And Saving You Time..
[Durable And Safe]Our Brake Caliper Hanger Is Made Of Durable Materials, With A Sturdy Structure That Is Not Easily Broken, Safe And Durable To Use. The Surface Is Coated To Ensure It Is Not Easily Deformed Or Rusted, And Can Be Used For A Long Time..
Features
- [Package Includes] The package contains 4 brake caliper hooks in sufficient quantity to meet your daily needs.
- [Durable and Safe]Our brake caliper hanger is made of durable materials, with a sturdy structure that is not easily broken, safe and durable to use. The surface is coated to ensure it is not easily deformed or rusted, and can be used for a long time.
- [Rubber Protective Cap] Each brake caliper hook has a rubber coated reminder at both ends, which can effectively prevent scratches on painted suspension components, securely secure the brake caliper, and reduce possible damage to the brake hose.
- [Function] If you are replacing brakes, bearings, axles, etc., our hook tool can easily hang the caliper on one side, which has a good protective effect on your caliper, brake hoses, and other parts, improving your work efficiency and saving you time.
- [Widely Applicable] Our brake caliper hanger has super strong load-bearing capacity, is safe and reliable, and can support most vehicles on the caliper. Suitable for various automotive tasks, such as tasks related to brake, wheel bearing, axle, and suspension maintenance.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
See On Amazon #10
LivTee 120pcs Retainer Clips Push Type Fasteners 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips with Remover Tool
Asin: B0927H3DWQ
Wide Range Of Applications: Push-In Cage Kits, With 12 Common Sizes, Widely Used In Automotive Panels, Decorative Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Panel Clips, Hoods The Replacement Of The Splash Plate Holder Is Common To Most Models And Is Fit For Ford Toyota Acura Gmc Chrysler Lexus Etc..
Buy With Confidence: Any Other Problem Please Feel Free To Contact Us, We Are Always Here To Satisfy All Of You..
Easy To Install: The Product Is Equipped With A Screwdriver, Easy To Operate, Easy To Install And Remove. Small Size, Easy To Store Or Carry Around..
High-Quality Nylon Material: These Car Clips Are Made Of High-Quality Black Nylon Material, Which Has Anti-Wear And Anti-Corrosion Effects. This Push-In Cage Kit Will Not Easily Break Or Rupture During Use..
Features
- 4 Hole sizes from 6.3mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ). Six kinds of different push pin rivet for many brand vehicles.
- High-quality nylon material: These car clips are made of high-quality black nylon material, which has anti-wear and anti-corrosion effects. This push-in cage kit will not easily break or rupture during use.
- Wide range of applications: Push-in cage kits, with 12 common sizes, widely used in automotive panels, decorative panel clips, door trim clips, door panel clips, bumper clips, fender panel clips, hoods The replacement of the splash plate holder is common to most models and is fit for Ford Toyota Acura GMC Chrysler Lexus etc.
- Easy to install: The product is equipped with a screwdriver, easy to operate, easy to install and remove. Small size, easy to store or carry around.
- BUY WITH CONFIDENCE: Any other problem please feel free to contact us, we are always here to satisfy all of you.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
Dimensions: 22.05 x 7.87 x 7.87 Inches
See On Amazon #11
10PCS CV Joint Boot Crimp Clamp Kit, Stainless Steel Adjustable Drive Shaft AXLE Boot Clamp, 5pcs Small and 5pcs Large, Universal Automotive Accessories for Car
Asin: B0BPS15XQ9 | Model: CV Joint Boot Crimp Clamp | PartNumber: CV Joint Boot Crimp Clamp
【Practical】: It Is Common For Inner Or Outet Cv Joints On Most Cars And Light Commercial Vehicles. Perfect To Replace Those Loose Or Damaged Parts And Effectively Prevent Grease Spillage. A High Quality Auto Parts Can Save You A Lot Of Repair Cost And Time..
【Worry Free】: We Are Always Committed To Provide You With Quality Product. You Can Buy With Confidence..
【Easy To Install】: First, Remove The Old Cv Boot Clamps. Then Clean Off The Grease And Dirt. Finally, Put The New Cv Boot Clamps On, And Then Just Lock And Tighten Them. We Use High Quality Automotive Grade Raw Materials And Manufacturing Processes To Ensure It Is The Perfect Replacement For Your Old Clamps..
【Stainless Steel】: The Cv Joint Clamp Is Made Of Very Durable Stainless Steel Material, Which Has Excellent Hardness And Corrosion Resistance. It Will Not Rust Or Get Damaged Even In A Wet Environment For A Long Time. It Is Very Stable, Safe And Reliable And Will Not Cause Any Damage To Your Vehicle..
Features
- WHAT YOU WILL GET : The package includes a set of 10 universal shaft CV joint boot crimp clamps. 5 small clamps measure 31.75mm (1.250") - 41.02mm (1.620"). 5 large clamps measure 69.85mm (2.750") - 127.00mm (5.000"). There is enough to meet all your daily needs.
- STAINLESS STEEL : The cv joint clamp is made of very durable stainless steel material, which has excellent hardness and corrosion resistance. It will not rust or get damaged even in a wet environment for a long time. It is very stable, safe and reliable and will not cause any damage to your vehicle.
- PRACTICAL : It is common for inner or outet CV joints on most cars and light commercial vehicles. Perfect to replace those loose or damaged parts and effectively prevent grease spillage. A high quality auto parts can save you a lot of repair cost and time.
- EASY TO INSTALL : First, remove the old cv boot clamps. Then clean off the grease and dirt. Finally, put the new cv boot clamps on, and then just lock and tighten them. We use high quality automotive grade raw materials and manufacturing processes to ensure it is the perfect replacement for your old clamps.
- WORRY FREE : We are always committed to provide you with quality product. You can buy with confidence.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 1.00 x 2.00 x 1.00 inches
Warranty: 0.2
See On Amazon #12
BELOMI Joint CV Boot Clamp Pliers, Ear Clamp Banding Tool Kit, Automotive Hose Axle Pliers, Heavy Duty Universal Vacuum Hoses Clamping, Auto Repair Tools for Car ATV UTV
Asin: B0C7ZP814S | Model: Pliers | PartNumber: Pliers
【Crimping Tool】: Equipped With In-Line Jaws On The End, This Axle Boot Clamp Tool Can Perfectly Crimp On Clamp Ears To Prevent Damage And Offer A Perfect Crimp On Clamp Ears To Prevent Leakage. It's A Must-Have Cv Boot Repair Kit For Repairing Store..
【What You Get】: The Package Includes 1X Cv Joint Ear Clamp Banding Tool And 1X Cv Boot Clamp Pliers, Same As The Pictures. Different Clamp To Meet Your Different Needs. We Focus On Customer Using Experience And Try Our Best To Provide The Best Product And Service For Our Customers..
【Large Compatibility】: The Cv Boot Clamp Pliers For Ear-Type Clamp Crimping Or Removal On For Most Vehicles In The Market To Crimp And Flatten The Clamp On Ear-Type Constant Velocity Joint Boot Clamps, Also Be Used For Securing Atv Utv Boot Clamps. Also A Good Cv Boot Installation Tool And Hose Grip Pliers Suitable For Installation Of Certain Clamps On Fuel Filters, Water Pumps And Other Cooling Systems..
【Practical Function】: The 2Pcs Cv Joint Boot Clamps Pliers Car Banding Tools Kit Set For Fast And Simple Tensioning And Securing Of Cv Boot Banding Strap. With A Built In Cutter And Winding Mechanism The Banding Can Be Tightened And Cut Quickly And Effectively. This Tool Is Essential For Fixing Cv Boots. Heavy-Duty Pliers With Steel Jaws And Formed Handles For Ultimate Comfort, Less User Fatigue, And More Productivity..
Features
- Premium Material : The pliers are made of high grade pressed steel and coated with a black coating. Heavy-duty pliers with non-slip plastic handles, high-quality steel jaws and shaped handles, making it more comfortable to use.
- Practical Function : The 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.
- Crimping Tool : Equipped with in-line jaws on the end, this axle boot clamp tool can perfectly crimp on clamp ears to prevent damage and offer a perfect crimp on clamp ears to prevent leakage. It's a must-have CV boot repair kit for repairing store.
- Large Compatibility : The CV boot clamp pliers for ear-type clamp crimping or removal on for most vehicles in the market to crimp and flatten the clamp on ear-type constant velocity joint boot clamps, also be used for securing ATV UTV boot clamps. Also a good CV boot installation tool and hose grip pliers suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems.
- What You Get : The package includes 1x CV joint ear clamp banding tool and 1x CV boot clamp pliers, same as the pictures. Different clamp to meet your different needs. We focus on customer using experience and try our best to provide the best product and service for our customers.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 1.00 x 3.00 x 1.20 inches | Weight: 0.49 pounds
Warranty: 0.2
See On Amazon #13
OFBAND Car Brake Caliper Hangers for Repair Axle,Brake Pads,Braking,Brake Caliper Hooks with Rubber Tipped for Brake Hoses Protection,Essential Automotive Tools for Most Car SUV Truck (2PCS, Blue)
Asin: B0BPLDSBSK | Model: Brake Caliper Hangers | PartNumber: Brake Caliper Hangers
👨🔧 Rubber Protection: Each Caliper Hanger Comes With A Rubberized Coating That Prevents Scratching The Vehicle Chassis. No Need To Worry About Hooks Scratching Or Causing Damage To Other Parts. The Highly Visible Coated Finish Allows You Will Always Be Able To Find These Hooks And Avoid Forgetting Them In Your Vehicle..
👨🔧 Cost Savings: The Caliper Hooks Kit Is Easy To Use And Does Not Require Complicated Operation. When Your Car Brakes System Malfunction, You Don't Need To Spend A Lot Of Money To Specially Go To The Auto Repair Store To Fix It, You Can Use It To Check And Repair It By Yourself, It's A Professional Automotive Tool!.
👨🔧 Widely Application: Our Caliper Hanger Offers Two Specifications, Two Piece And Four Piece, Size Is 7.90*1.88*0.19 Inches, Which Meets Your Daily Use And Replacement, And It Has A Wide Range Of Application, Suitable For Most Of Cars, Vans, Rvs, Trucks And So On In The Market, And You Can Buy It On Your Own According To Your Needs!.
👨🔧 Essential Brake Tools: Our Car Brake Caliper Hangers Is A Very Specialty Tools! It Can Help You Easily Hang Your Car Accessories Aside When Repairing Bearings, Brakes, Axles, Effectively Protect The Shock System And Avoid Damage To Brake Pads And Hoses, Which Greatly Improves The Work Efficiency For You!.
Features
- Durable Car Tools: The brake hook is made of high strength steel material with high durability and aging resistance. It can withstand working under high temperature and high pressure environment and is not easy to be deformed and broken, which makes sure its performance is stable and reliable, providing you with long time use.
- Essential Brake Tools: Our car brake caliper hangers is a very specialty tools! It can help you easily hang your car accessories aside when repairing bearings, brakes, axles, effectively protect the shock system and avoid damage to brake pads and hoses, which greatly improves the work efficiency for you!
- Rubber Protection: Each caliper hanger comes with a rubberized coating that prevents scratching the vehicle chassis. No need to worry about hooks scratching or causing damage to other parts. The highly visible coated finish allows you will always be able to find these hooks and avoid forgetting them in your vehicle.
- Widely Application: Our caliper hanger offers two specifications, two piece and four piece, size is 7.90*1.88*0.19 inches, which meets your daily use and replacement, and it has a wide range of application, suitable for most of cars, vans, RVs, trucks and so on in the market, and you can buy it on your own according to your needs!
- Cost Savings: The caliper hooks kit is easy to use and does not require complicated operation. When your car brakes system malfunction, you don't need to spend a lot of money to specially go to the auto repair store to fix it, you can use it to check and repair it by yourself, it's a professional automotive tool!
- See more on Amazon...
Brand: OFBAND | Manufacturer: OFBAND
Dimensions: 0.20 x 8.20 x 1.90 inches
Warranty: Warranty Within 3 Months
See On Amazon #14
4000PSI Electric Pressure Washer, 2.8GPM 2000W Power Washer, High Pressure Cleaner Machine with Spray Gun, 5 Nozzles & Foam Cannon for Cleaning Homes, Cars, Patios
Asin: B08XM8MSH1 | Model: JX079 | PartNumber: JX079 | Ean: 0737644534669 | UPC: 737644534669
【5 Nozzle Option】: 5 Quick-Connect Spray Nozzles Are Included So You Can Get The Desired Spray Angle; 0° Nozzle For Spot Cleaning Or Hard-To-Reach Areas, 15° Nozzle For Tough Jobs, 25° Nozzle For All-Purpose Cleaning, 40° Nozzle For Cleaning Windows And Screens, And A Soap Nozzle For Foam Spraying..
【Tss & Safety Lock】: Features Automatic Total Stop System (Tss), Which Automatically Shuts Off The Pump When Trigger Is Not Engaged. 33Ft Power Cord With Inline Gfci For Added Safety. Safety Child Lock Design,Locks The Water Gun Trigger To Prevent Misuse By Children..
【Ergonomic And Efficient】: Compact, Upright Design With Axle Mounted Wheels Allows Easy Roll-Away Mobility. Pistol Style Grip With Trigger Spray Wand Dispenses For Efficient Pressure Washing..
【Leak-Proof Connections】: Professional Metal Garden Hose Connector And Superior Metal Water Outlet. Comes With A 20Ft High-Pressure Hose (Metal Connection) To Avoid Annoying Water Leakage. And We Offer A Two-Year Warranty As A Guarantee..
Features
- Electric Pressure Washer : Powerful 2000-Watt motor generates up to 4000 PSI/2.8 GPM. Powered using an air cooled industrial motor and the power will blast through grime and dirt to restore your surfaces. Perfect for siding, decks, cement, pavement, pools, outdoor furniture, cars, trucks.
- Leak-proof Connections : Professional metal garden hose connector and superior metal water outlet. Comes with a 20ft high-pressure hose (metal connection) to avoid annoying water leakage. And we offer a two-year warranty as a guarantee.
- 5 Nozzle Option : 5 quick-connect spray nozzles are included so you can get the desired spray angle; 0 nozzle for spot cleaning or hard-to-reach areas, 15 nozzle for tough jobs, 25 nozzle for all-purpose cleaning, 40 nozzle for cleaning windows and screens, and a soap nozzle for foam spraying.
- Ergonomic and Efficient : Compact, upright design with axle mounted wheels allows easy roll-away mobility. Pistol style grip with trigger spray wand dispenses for efficient pressure washing.
- TSS & Safety Lock : Features Automatic Total Stop System (TSS), which automatically shuts off the pump when trigger is not engaged. 33ft power cord with inline GFCI for Added Safety. Safety child lock design,locks the water gun trigger to prevent misuse by children.
- See more on Amazon...
Brand: Fazil | Manufacturer: H.yeed
Dimensions: 21.10 x 12.91 x 13.86 Inches | Weight: 19.80 pounds
See On Amazon #15
VEVOR Pool Cover Reel, Aluminum Solar Cover Reel 18 ft, Inground Swimming Pool Cover Reel Set with Rubber Wheels and Sandbags, Fits for 4-18 ft Width Swimming Pools
Asin: B0CRR1Z7Y9 | Model: PCR17-A83/51.45 | PartNumber: PCR17-A83/51.45 | Ean: 0197988265764 | UPC: 197988265764
Thoughtful Anti-Tip Design: To Maximize Stability, The Package Includes Sandbags To Add Weight That Effectively Prevents The Pool Cover Reel From Tipping Over In Strong Winds Or While Moving, Ensuring Your Pool Cover Remains Intact..
All-In-One Shipping, No More Waiting: Compared To Other Reels, We Adopt All-In-One Shipping To Reduce The Risk Of Missing Parts, And You Don't Have To Wait For Another Package! Package Includes 1 X Pool Cover Reel With Handle, 2 X Sandbag Bags, 8 X Set Of Nylon Straps + Buckles + Clips, 1 X User Manual..
Rust-Proof Construction And High Durability: Vevor Pool Cover Roller For Inground Pools Combines High-Quality Aluminum Alloy Construction With Sturdy Stainless Steel Legs And Rubber Wheels, Offering Excellent Corrosion-Proof And Long-Term Outdoor Durability..
Easy To Assemble And Use: Vevor Solar Cover Reel With Lockable Telescopic Tube Has A Good Balance, And It Comes With Threaded Clips And Nylon Straps For Extra Strong Grip, Helping You Roll Up Your Pool Cover Much More Easily. No Professional Tools Requirement..
Features
- Fits All Shape Pools Up to 18 Feet: This VEVOR pool cover reel fits 4 feet to 18 feet wide in-ground swimming pools of all shapes. Suitable for round pools, rectangular pools, kidney shaped pools, odd shaped pools and so on.
- Easy to Assemble and Use: VEVOR solar cover reel with lockable telescopic tube has a good balance, and it comes with threaded clips and nylon straps for extra strong grip, helping you roll up your pool cover much more easily. No professional tools requirement.
- Thoughtful Anti-Tip Design: To maximize stability, the package includes sandbags to add weight that effectively prevents the pool cover reel from tipping over in strong winds or while moving, ensuring your pool cover remains intact.
- Rust-proof Construction and High Durability: VEVOR pool cover roller for inground pools combines high-quality Aluminum Alloy construction with sturdy stainless steel legs and rubber wheels, offering excellent corrosion-proof and long-term outdoor durability.
- All-In-One Shipping, No More Waiting: Compared to other reels, we adopt all-in-one shipping to reduce the risk of missing parts, and you don't have to wait for another package! Package includes 1 x pool cover reel with handle, 2 x sandbag bags, 8 x set of nylon straps + buckles + clips, 1 x user manual.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 0.00 x 236.53 x 22.63 inches | Weight: 28.22 pounds
See On Amazon #16
Universal Floor Jack Rubber Pad, Jack Pad Adapter Pinch with Cross Groove Design, Weld Side Frame Rail Protector Puck, Slotted Jack Stands Disk, Auto Accessories Fit for Most Cars (1)
Asin: B0BN37ZT9D | Model: Floor Jack Rubber Pad | PartNumber: Floor Jack Rubber Pad
【Strong Load Bearing】: The Rubber Jack Has A Cross-Slot Design, Which Allows It To Align With The Side Clamp Welds And Protect The Sides, Thus Preventing The Frame Longitudinal Beam From Bending When The Vehicle Is Lifted With The Jack. The Heavy-Duty Rubber Material Has A Maximum Load Capacity Of 3 Tons, Which Can Provide More Cushioning And Pressure Resistance..
【Service Guarantee】: Our Team Have The Formidable Design Research And Development Ability, The Extremely Strict Management And The Quality Control System. If You Have Any Questions Or Issues, Please Feel Free To Get In Touch With Us, Our After-Sales Team Will Provide You With The Best Solution..
【Package Includes】:You Will Receive 1 Or 2 Packs Of Universal Jack Rubber Pads (Choose The Quantity You Want). Please Note! The Heavy Duty Rubber Material Will Carry A Little Rubbery Smell, You Just Need To Leave It In A Ventilated Place For A While..
【Universal Size】: The Perfect Size Of 4.92 X 1.02 Inches Fits Most Jacks And Vehicles. This Is Perfect For Diy Vehicle Maintenance And We Recommend That You Have One In Your Car Just In Case. Please Check The Size And Make Sure It Fits Your Vehicle Before Purchasing..
Features
- Durable Rubber : The floor jacking pad is made of high hardness rubber material, which can jack up your car and perfectly protect the clamp welds and frame rails from bending or breaking. Please be assured that the soft rubber surface will not scratch the painted or coated chassis parts.
- Universal Size : The perfect size of 4.92 x 1.02 inches fits most jacks and vehicles. This is perfect for DIY vehicle maintenance and we recommend that you have one in your car just in case. Please check the size and make sure it fits your vehicle before purchasing.
- Strong Load Bearing : The rubber jack has a cross-slot design, which allows it to align with the side clamp welds and protect the sides, thus preventing the frame longitudinal beam from bending when the vehicle is lifted with the jack. The heavy-duty rubber material has a maximum load capacity of 3 tons, which can provide more cushioning and pressure resistance.
- Package Includes :You will receive 1 or 2 packs of universal jack rubber pads (choose the quantity you want). Please note! The heavy duty rubber material will carry a little rubbery smell, you just need to leave it in a ventilated place for a while.
- Service Guarantee : Our team have the formidable design research and development ability, the extremely strict management and the quality control system. If you have any questions or issues, please feel free to get in touch with us, our after-sales team will provide you with the best solution.
- See more on Amazon...
Brand: zipelo | Manufacturer: zipelo
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: 0.2
See On Amazon #17
Hirificing 2PCS Brake Caliper Hanger Hooks Mechanic Specialty Tools for Braking Bearing Axle and Suspension Work, Car Brake Caliper Hangers with Rubber Tips Automotive Tools(Red)
Asin: B0CXNTDLDZ | Model: Hirificing-AUTO-14 | PartNumber: Hirificing-AUTO-14
【Protective Design】These Brake Caliper Hanger Hooks Are Wrapped With Rubber Heads On Both Ends. This Design Can Effectively Prevent The Hooks From Scratching The Painted Suspension Parts Or Causing Damage To Other Parts Of The Car, Even When Working In A Small Area..
【Various Color Options】Our Brake Caliper Hooks With Rubber Tips Are Painted With A Bright Powder Coating On The Surface, Which Not Only Prevents Rust, But The Noticeable Color Also Makes It Easy To Find Them Quickly When You Need Them, Improving Your Work Efficiency..
【Widely Used】These Mechanic Specialty Tools Are Suitable For Most Cars, Trucks, Vans And Other Vehicles. They Are Widely Used In Repairing And Replacing Brakes, Front Brake Pads, Bearings, Axles, Exhaust Systems, Suspension Systems, Etc., And Can Also Be Used Hang Other Items..
【Super Load-Bearing】Our Brake Caliper Hanger Is Made Of High-Quality Durable Steel, Can Withstand A Rated Weight Of About 100 Pounds, Is Not Easy To Break, Has Strong Load-Bearing Capacity, Is Sturdy And Durable, And Can Be Used For A Long Time..
Features
- Fixed in Place Our brake caliper hook is a multi-functional automotive tool that can securely hang the brake caliper on the vehicle frame, safely and efficiently, making it simple and convenient to replace brake pads and brake discs during car maintenance work.
- Super Load-Bearing Our brake caliper hanger is made of high-quality durable steel, can withstand a rated weight of about 100 pounds, is not easy to break, has strong load-bearing capacity, is sturdy and durable, and can be used for a long time.
- Protective Design These brake caliper hanger hooks are wrapped with rubber heads on both ends. This design can effectively prevent the hooks from scratching the painted suspension parts or causing damage to other parts of the car, even when working in a small area.
- Widely Used These mechanic specialty tools are suitable for most cars, trucks, vans and other vehicles. They are widely used in repairing and replacing brakes, front brake pads, bearings, axles, exhaust systems, suspension systems, etc., and can also be used hang other items.
- Various Color Options Our brake caliper hooks with rubber tips are painted with a bright powder coating on the surface, which not only prevents rust, but the noticeable color also makes it easy to find them quickly when you need them, improving your Work efficiency.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.21 x 8.18 x 1.90 inches | Weight: 0.23 pounds
See On Amazon #18
YAKEFLY 25 Ft Flexible Tube Line Roll,1/4" Brake Line Tubing Kit,Copper Coated Alloy Brake Line Tubing Coil with 16 Inverted Flare Fittings,Fuel Line Coil(Silver)
Asin: B0C5MBWRT9 | Model: 500QCSCG001 | PartNumber: 500QCSCG001
[Size] The Length Of The Brake Pipeline Is 25Ft And The Outer Diameter Is 1/4 Inch..
[Widely Used] Brake Pipeline Kits Are Usually Suitable For Hydraulic Braking Systems, Fuel Systems, And Transmission Systems. It Is Also Widely Applicable For Household, Industrial, And Commercial Purposes..
[Easy To Bend] Flexible Copper Plated Brake Pipes Are Easy To Manually Bend, Have Great Flexibility, And Can Be Expanded With Simple Tools..
[High Quality Material] The Brake Pipe Is Made Of Heavy-Duty Copper Plated Wire And Adopts Unique Rust And Corrosion Prevention Technology, Which Has Better Corrosion Resistance Than Standard Steel Pipes..
Features
- [Package Includes] The package includes 1 replacement brake line and 16 most common inverted pipe nuts: 2 x 1/4 "(7/16-24) inverted pipe nuts; 10 x 1/4" (7/16-24) inverted pipe nuts (long); 2 x 1/4 "(9/16-18) inverted clamp pipe nuts; 2 x 1/4" (1/2-20) inverted clamp pipe nuts;
- [High Quality Material] The brake pipe is made of heavy-duty copper plated wire and adopts unique rust and corrosion prevention technology, which has better corrosion resistance than standard steel pipes.
- [Size] The length of the brake pipeline is 25FT and the outer diameter is 1/4 inch.
- [Easy to Bend] Flexible copper plated brake pipes are easy to manually bend, have great flexibility, and can be expanded with simple tools.
- [Widely Used] Brake pipeline kits are usually suitable for hydraulic braking systems, fuel systems, and transmission systems. It is also widely applicable for household, industrial, and commercial purposes.
- See more on Amazon...
Brand: YAKEFLY | Manufacturer: YAKEFLY
See On Amazon #19
3mirrors Aluminum Tungsten Electrode Sharpener Grinder for TIG Welding Tool w/Cut-Off Slot Multi-Angle& Offsets, 4 Copper Screws Holes& 2 Upgrade CNC Mandrels& 5 25mm Diamond Wheels& Instructions
Asin: B07VWQ5553 | Ean: 7909991972828
The Tungsten Electrode Sharpener Comes With 4 Brass Tungsten Guide Screws: 040", 1/16", 3/32" And 1/8" (1Mm, 1.6Mm, 2.4Mm, 3.2Mm). The Guides Ensure Concentricity And Multi-Offset. Increase The Utilization Of The Grinding Wheels. When Grinding, The Position Of The Copper Screw Can Be Exchanged To Obtain Your Desired Angles Of The Tungsten Needle. The Kit Extras Come With 1 Small Storage Bag(To Prevent Scratches And Wear), 5X 25Mm Double-Sided Grind Wheels, And 2 Cnc Mandrels(Service Longer)..
Wearing A Mask And Other Protective Gear Is Recommended Unless You Are Grinding In A Full-Sealed Space. We Are The Original Brand And Have Been Working On This Tool For Many Years, Knowing What Our Users Want And Constantly Improving It. Please Note That The 3Mirrors Brand Is The Original Design. The Appearance Can Be Imitated But The Core Data And The Exact Angles Cannot. For Your Convenience, Please Avoid Purchasing Piracy. Any Questions, Please Contact Us For Professional Help!.
A Tungsten Grinding Tool Has 4 Angled Holes. 22.5°, 20°, 15° And 10° (45°, 40°, 30°, 20° Tips Angle Respectively). Precise Control Support Grinds More Perfectly Tungsten Angle Tips. All Holes Are Designed To Touch The Same Height As The Diamond Wheel, No Need To Set Repeatedly. The Open Design Allows The Grinding Wheel To Be Easily Installed And Aligned. The Sharpening Tool Also Has Tungsten Cut-Off Port Processing, Which Can Cut The Used Balled Electrodes For Re-Insert And Grinding..
The Grinder Head Fits Black And Decker, Milwaukee, Bosch Dremel And More Rotary Tools With A 3/4-12 Thread! (Package No Rotary Tools Included). The Tool Is Light And Portable, Simple And Quick, It Takes Less Than 30S To Sharpen A Tungsten Needle W/ A Perfect Angle Tip, More Convenient Than Those Cumbersome Grinding Machines On Your Tig Desktop. Help You Improve Efficiency..
Features
- This is one of our most popular Tungsten Electrode Sharpener controllers, for TIG Welding and grinding 4 types size tungsten needles, choose it if you are the first time to use. The Tungsten grinder body is upgraded aluminum alloy material, and professional 3D CNC finishing, Durable with no trouble with high-temperature melting. The Brass Guides and Mandrels are also CNC machined with higher accuracy and will be more durable. The new mandrel swing less when grinding, Easy Application.
- The grinder head fits Black and Decker, Milwaukee, Bosch Dremel and More Rotary Tools with a 3/4-12 thread! (Package No Rotary Tools Included). The tool is Light and portable, simple and quick, it takes less than 30s to sharpen a tungsten needle w/ a perfect angle tip, more convenient than those cumbersome grinding machines on your tig desktop. Help you improve efficiency.
- The Tungsten Electrode Sharpener comes with 4 Brass Tungsten Guide Screws: 040, 1/16, 3/32 and 1/8 (1mm, 1.6mm, 2.4mm, 3.2mm). The guides ensure concentricity and multi-offset. Increase the utilization of the grinding wheels. When grinding, the position of the copper screw can be exchanged to obtain your desired angles of the tungsten needle. The kit extras come with 1 small storage bag(To prevent scratches and wear), 5x 25mm Double-Sided Grind Wheels, and 2 CNC Mandrels(Service longer).
- A tungsten grinding tool has 4 angled holes. 22.5 , 20 , 15 and 10 (45 , 40 , 30 , 20 Tips Angle respectively). Precise control support grinds more perfectly tungsten angle tips. All holes are designed to touch the same height as the diamond wheel, no need to set repeatedly. The open design allows the grinding wheel to be easily installed and aligned. The sharpening tool also has tungsten cut-off port processing, which can cut the used balled electrodes for re-insert and grinding.
- Wearing a mask and other protective gear is recommended unless you are grinding in a full-sealed space. We are the original brand and have been working on this tool for many years, knowing what our users want and constantly improving it. Please note that the 3mirrors Brand is the Original Design. The appearance can be imitated but the core data and the exact angles cannot. For your convenience, please avoid purchasing piracy. Any questions, please contact us for professional help!
- See more on Amazon...
Brand: 3mirrors | Manufacturer: 3mirrors
Dimensions: 2.56 x 1.69 x 1.69 inches | Weight: 0.00 Grams
See On Amazon
Looking For Something Else?
Search