ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer (With 1M Extension Cable Set)
Asin: B076PQG1FF | Model: BLT001 | PartNumber: BLT001 | Ean: 0796752129815 | UPC: 796752129815
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.It Could Work With Any Kinds Of Bed Materials, Such As Glasses, Woods, Metals, And So On..
Comes With 1M Dupont Connector Extension Cable Set.
Simple, Smart, & Precise With Repeatability Is Around 0.005Mm.
Features
- BLTouch is an auto leveling sensor for 3D Printers based on open-source.
- Simple, Smart, & Precise with repeatability is around 0.005mm
- It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
- Comes with 1m dupont connector extension cable set
- See more on Amazon...
Brand: ANTCLABS | Manufacturer: ECTY
Dimensions: 1.97 x 5.91 x 3.94 Inches
See On Amazon Similar To ANTCLABS BLTouch Auto Bed Leveling
#1
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 inches | Weight: 0.26 Pounds
See On Amazon #2
Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B09DVYZSYJ | Model: CRTOUCH | PartNumber: CRTOUCH
【Independent Research And Development Stable Function】Cr Touch Is A Creality 3D Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
【Strong Compatibility】Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
【Package Include】1*Cr Touch Auto Leveling Sensor, 5*0.4Mm Nozzle, 3*Moounting Brackets, 1*Installation Guide, 3*Tie And 4*Screw.
【Multi-Point Detection Smart Compensation】Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
【About Reflash The Firmware】1. Download The Corresponding Firmware From The Creality Official Website. 2. Copy It To The Sd Card. 3. Rename It To 123.Bin, 4. Insert The Sd Card Into The Printer, 5. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Wide Application This Creality cr touch auto-leveling kit is equipped with 3 mounting brackets and is only suitable for the following 3D printers with V4.4.2/V4.2.7 motherboards (Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/cr 10), other machines are not compatible. Please confirm your machine and motherboard version before purchasing.
- About Reflash the Firmware 1. Download the corresponding firmware from the Creality official website. 2. copy it to the SD card. 3. Rename it to 123.bin, 4. Insert the SD card into the printer, 5. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct CR touch firmware).
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- Package Include 1*CR Touch Auto Leveling Sensor, 5*0.4mm Nozzle, 3*Moounting brackets, 1*Installation Guide, 3*Tie and 4*Screw
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.29 pounds
See On Amazon #3
Creality Ender 3 Auto Bed Leveling Kit, Official CR Touch for Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard, 3D Printer Leveler Sensor Tool Kit Silicone Mounts
Asin: B0BXGCHZDL
More Professional Design: Compared With The Old Bl Touch, The New Cr Touch Uses A Combination Of Optical And Metal Probes, Which Increases The Service Life And Reduces Errors Caused By Magnetic Fields And Temperatures. 3D Automatic Bed Leveling Is Compatible With Pei, Stickers, Glass, Metal Platform. The Number Of Detections Has Reached A Revolutionary 100,000 Times, And The Positioning Accuracy Is ≤0.04Mm..
Package Includes: 1*Cr Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4M Power Cord, 3*Tie Straps, 4*Screws. Download The Firmware From The Official Website Of Creality And Copy It To The Blank Sd Card, Insert It Into The Card Slot Of The 3D Printer, Turn On The Power, And The Printer Will Read And Install The Firmware..
Strong Compatibility: Cr Touch Is An Automatic Leveler Specially Designed For Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/Cr-10 Models, Only Applicable To 32-Bit V4.2.2 And V4.2.7 Motherboards. The Included 3 Brackets Can Be Easily Installed On The Above Models..
Automatic Leveling: Cr Touch Conducts Multi-Point Detection On The Printing Platform, Records The Distance Of Each Point, And Constructs A Virtual Plane. Carry Out Distance Compensation Calculation When Printing, And Automatically Adjust The Nozzle Distance. Matched With The Silicone Leveling Column, It Can Be Leveled For A Long Time After One Leveling. Multiple Use Only Needs To Be Checked With Cr Touch..
Features
- After-sales Service: In order to let more 3D printing enthusiasts enjoy the comfort of CR Touch, we wholeheartedly provide you with 24-hour online after-sales service. Regardless of the various problems you encounter during the installation and use of CR Touch, please contact us in time, and our professional technical team will provide you with detailed solutions.
- Automatic Leveling: CR Touch conducts multi-point detection on the printing platform, records the distance of each point, and constructs a virtual plane. Carry out distance compensation calculation when printing, and automatically adjust the nozzle distance. Matched with the silicone leveling column, it can be leveled for a long time after one leveling. Multiple use only needs to be checked with CR Touch.
- More Professional Design: Compared with the old BL Touch, the new CR Touch uses a combination of optical and metal probes, which increases the service life and reduces errors caused by magnetic fields and temperatures. 3D automatic bed leveling is compatible with PEI, Stickers, Glass, Metal platform. The number of detections has reached a revolutionary 100,000 times, and the positioning accuracy is 0.04mm.
- Strong Compatibility: CR Touch is an automatic leveler specially designed for Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/CR-10 models, Only applicable to 32-bit V4.2.2 and V4.2.7 motherboards. The included 3 brackets can be easily installed on the above models.
- Package Includes: 1*CR Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4m Power Cord, 3*Tie Straps, 4*Screws. Download the firmware from the official website of Creality and copy it to the blank SD card, insert it into the card slot of the 3D printer, turn on the power, and the printer will read and install the firmware.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #4
ENOMAKER BL Touch Probe Pin Replacement Smart Auto Bed Leveling Push-Pin Needle Self Level Sensor Probe Tips for Bltouch, 3D Touch (5 PCS)
Asin: B09Q2QCHB5 | Model: ENO-BLTouch-Pins | PartNumber: ENO-BLTouch-Pins | Ean: 0705300792203 | UPC: 705300792203
It Is A Cost-Effective Way To Prolong The Service Life Of Your Autobed Leveling Sensor Kits With High Performance..
Compatible For Bl Touch, 3D Touch..
Easy To Use And Install..
It Is Made Of High-Quality, Safe Plastic And Is Durable..
Features
- 5 pcs practical touch probe pins to ensure the safety of your printer.
- It is made of high-quality, safe plastic and is durable.
- It is a cost-effective way to prolong the service life of your autobed leveling sensor kits with high performance.
- Easy to use and install.
- Compatible for BL touch, 3D touch.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #5
Upgraded 3D Touch V3.2 BL-Touch Replacement incl. 4 Brackets Compatible with Ender-3/3S/3Pro, Ender-5/5S/5Pro,CR-10 and Geeetech 3D Printers Auto Bed Leveling Sensor Kit, 0.005mm Accuracy
Asin: B0CGHJDWHW
Easy Installation: Teqstone 3D Touch Is Designed For Easy Installation And Compatibility With A Wide Range Of 3D Printers. It Can Be Easily Integrated Into Your Existing Setup, Saving You Time And Effort..
Extensive Adaptability: The 3D Touch Is Designed To Be Compatible With Various 3D Printer Models And Control Boards, Making It A Versatile Choice For Hobbyists, Enthusiasts, And Professionals..
Reliable Performance: Teqstone 3D Touch Delivers Reliable Performance, Accurately Detecting The Distance Between The Nozzle And The Print Bed To Compensate For Unevenness Or Tilt. This Ensures Optimal Print Adhesion And Precise Filament Deposition..
Improved Accuracy: V3.2 Is The Latest Version Of 3D Touch, Which Offers Enhanced Accuracy By +/-0.005Mm, Providing Precise Detection Of The Nozzle-To-Bed Distance. This Results In Superior Print Quality With Precise Layer Heights And Improved Overall Accuracy..
Features
- Automatic Bed Leveling: With 4 included mounts you can now enjoy the convenience of automatic bed leveling regardless of your setup. TEQStone 3D Touch features automatic bed leveling technology, similar to the popular BL Touch sensor, ensuring a level print bed for consistent and high-quality 3D prints.
- Improved Accuracy: V3.2 is the latest version of 3D Touch, which offers enhanced accuracy by +/-0.005mm, providing precise detection of the nozzle-to-bed distance. This results in superior print quality with precise layer heights and improved overall accuracy.
- Easy Installation: TEQStone 3D Touch is designed for easy installation and compatibility with a wide range of 3D printers. It can be easily integrated into your existing setup, saving you time and effort.
- Reliable Performance: TEQStone 3D Touch delivers reliable performance, accurately detecting the distance between the nozzle and the print bed to compensate for unevenness or tilt. This ensures optimal print adhesion and precise filament deposition.
- Extensive Adaptability: The 3D Touch is designed to be compatible with various 3D printer models and control boards, making it a versatile choice for hobbyists, enthusiasts, and professionals.
- See more on Amazon...
Brand: TEQStone | Manufacturer: TEQStone
Weight: 0.07 Pounds
See On Amazon #6
Creality CR Touch Auto Bed Leveling Sensor Kit for 32 Bit V4.2.2/(.7) Mainboard Ender 3v2/3/Pro/Ender 5/Pro/CR-10,Capricorn PTFE Bowden Tubing 1M,Aluminum Extruder, 0.4mm Nozzle, PC4-M6/M10 Fittings
Asin: B09BVTQR6M | Model: crzh-gz | PartNumber: crzh-gz
Easy Firmware Installation:Simply Download The Cr Touch Firmware From The Creality Official Website And Save The File To Your Printer’S Memory Card. Insert The Card In To Your Printer. Turn On The Printer And Wait A Few Seconds For The Firmware To Install..
This Bundle Includes Capricorn Ptfe Teflon Tubing Which Is Enhanced With A Proprietary Blend Of High Performance Additives. It Was Developed Specifically For 1.75Mm Filament With An Extremely Precise 1.9Mm ± 0.05Mm Internal Diameter. Reduces The ""Wiggle Room,"" Or Buckling, Inside The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems.The Aluminum Extruder Is Lightweight And Strong, Ensuring A More Even Feed Rate Over Time ..
Enhanced Leveling With Precision Of +/- 0.005Mm. This Allows For Easy Leveling With Pinpoint Accuracy..
Compatible: This Cr Touch Fits For Creality Ender3 V2/Ender3/Ender3 Pro/Ender5/Ender5 Pro/Cr-10 With 32 Bit V 4.2.2(4.2.7) Mainboard.Notice:Just For 32 Bit Motherboard Printers..
Features
- Package Include: CR Touch Auto Bed Leveling Sensor,Capricorn PTFE Teflon Tubing 1M, Aluminum Extruder 4* Premium Metal Bed Springs, 2*PC4-M6 Pneumatic Fittings, 2*PC4-M10 Fittings, 2*0.4mm Nozzle.
- Compatible: This CR Touch fits for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5 Pro/CR-10 with 32 bit v 4.2.2(4.2.7) mainboard.Notice:Just for 32 bit motherboard printers.
- Easy firmware installation:Simply download the CR Touch firmware from the Creality Official Website and save the file to your printer s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
- Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
- This bundle includes Capricorn PTFE Teflon Tubing which is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the wiggle room, or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time .
- See more on Amazon...
Brand: Cregrant3D | Manufacturer: Creality
See On Amazon #7
Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
Asin: B098LQ9WPX | Model: US-CR | PartNumber: US-CR
【Widely Application】The Kit Contains 3 Different Mounting Brackets And Extension Cords. You Can Easily Install.
【Creality Ideal Companion】Cr Touch Works For Ender3 V2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro With 32 Bit Motherboard.(Don't Work For Ender 6 )Important: This Cr Touch Doesn't Work For The 8 Bit Mainboard, Please Make Clear What Version Of Your Mainboard Is Before Purchasing..
【Strong Compatibility】Cr Touch 3D Printer Auto Leveling,Compatible With Pei / Sticker Bed / Glass Bed / Metal Bed.
【Easy To Install And Easy To Use】Download The Cr Touch Program From The Creative Official Website And Copy It To The Tf/Sd Card. Insert It Directly Into The Card Slot Of The 3D Printer. The Program Can Be Updated After Power On..
Features
- Upgrade Independent development CR Touch is upgraded to a metal probe, Exquisite exterior design Positioning accuracy 0.04mm , Automatic detection and leveling , It can be reused for more than 100,000 times.
- Easy to install and easy to use Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
- Widely Application The kit contains 3 different mounting brackets and extension cords. You can easily install
- Strong compatibility CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
- Creality ideal companion CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit motherboard.(Don't work for Ender 6 )Important: This CR touch doesn't work for the 8 bit mainboard, Please make clear what version of your mainboard is before purchasing.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Creality
See On Amazon #8
Creality CR Touch Auto Bed Leveling Sensor Kit for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
Asin: B0979F7RWN | Model: CR-Touch Auto leveling Kit | PartNumber: CR-Touch Auto leveling Kit | Ean: 0633690247303 | UPC: 633690247303
【Product Durability】 Creality Cr Touch Is Specially Designed For 3D Bed Leveling For Creality 3D Printers. Compared With Bl Touch, It Has Stable Quality, Long Service Life, And Can Be Reused More Than 100,000 Times..
【Strong Compatibility】Cr Touch 3D Printer Auto Leveling,Compatible With Pei / Sticker Bed / Glass Bed / Metal Bed.
【Creality Ideal Companion】Cr Touch Works For Ender3 V2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 S/ Cr 10 With 32 Bit Motherboard.(3D Printer Accessory With The Best Experience).
【Easy To Install And Use】The Kit Contains 3 Different Mounting Brackets And Extension Cords. You Can Easily Install.
Features
- After-sales Service Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Easy to Install and Use The kit contains 3 different mounting brackets and extension cords. You can easily install
- Product Durability Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times.
- Creality ideal companion CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience)
- Strong compatibility CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed
- See more on Amazon...
First Available: 09/18/2023
Brand: 3idea | Manufacturer: Creality
Dimensions: 1.77 x 2.36 x 3.94 inches
Warranty: 180day
See On Amazon #9
BIGTREETECH BLTouch V3.1 Auto Bed Leveling Sensor Kit+Mount Bracket+1M Extension Cable for Ender 3,Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR10 3D Printer with SKR Mini E3 V3.0,Octopus/Manta Board
Asin: B087CQ3RLG | Model: 1 | PartNumber: 1 | Ean: 0779288068124 | UPC: 779288068124
🎅【Simple To Use】Thanks To Its Small And Simple Structure, Bl Touch Auto Leveling Kit Can Be Easily Applied. As Bltouch Works As Usual Auto Bed Leveling Sensor, Gathering Information & Setting Up Your Firmware Will Be An Easy Task. Can Be Used On Heating Beds Made Of Glass, Wood, Metal And Other Materials..
🎅【Wide Compatiblity】Bl Touch Auto Bed Leveling Sensor With The Bracket Is Suitable For Ender 3/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/Ender 5S/Cr10 3D Printer, Compatible With Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Max Ez/Skr V1.4 Turbo/Skr 3/Ez/Manta M8p/M4p/M5p,Manta E3 Ez/Kraken/Skr Pico, V4.2.7, Mks Gen L...3D Printer Control Board..
🎅【What You Get】This Kit Consists Of Bltouch V3.1 Auto Leveling Sensor, Mount And 1 Meter Extension Cable, Which May Not Fit Ender 3 Pro Machine. If You Wanna Buy Extra Extension Cable, Please Check The Asin: B08g8b23l7(Copy And Paste On Search Bar)..
🎅【Logic Voltage Free】3.3V/5V The Desired Output Logic Voltage Is Stored In The Eeprom Of The Probe And Can Be Selected By Commands. The Z Trigger Pulse With Adaptable Width Beyond 10Ms Eliminates The Danger Of Firmware Missing The Trigger And The Nozzle Reaching The Bed..
🎅【Smart To Use】Bl Touch Auto Bed Leveling Kit Featured With Self-Test, The Push Pin Is Operated Three Times To Test When The Power Is On. Bltouch V3.1 Also Added Other Smart Functions, Like Alarm, Alarm Release, Test Mode For M119, Which Enables User Convenience And Enjoyable Printing..
Features
- High precision ANTCLABS BLTouch V3.1 auto bed leveling sensor s standard deviation in repeatability is around 0.005mm precise. The stroke is up to 1.6mm longer than V2.0.
- Smart to Use BL touch auto bed leveling kit featured with self-test, The push pin is operated three times to test when the power is on. Bltouch V3.1 also added other smart functions, like alarm, alarm release, test mode for M119, which enables user convenience and enjoyable printing.
- Simple to Use Thanks to its small and simple structure, bl touch auto leveling kit can be easily applied. As BLTouch works as usual auto bed leveling sensor, gathering information & setting up your firmware will be an easy task. can be used on heating beds made of glass, wood, metal and other materials.
- Logic Voltage Free 3.3V/5V the desired output logic voltage is stored in the EEPROM of the probe and can be selected by commands. The Z trigger pulse with adaptable width beyond 10ms eliminates the danger of firmware missing the trigger and the nozzle reaching the bed.
- Wide Compatiblity BL touch auto bed leveling sensor with the bracket is suitable for Ender 3/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/Ender 5S/CR10 3D Printer, compatible with SKR MINI E3 V3.0/Octopus V1.1/Octopus Pro/Max EZ/SKR V1.4 Turbo/SKR 3/EZ/Manta M8p/M4p/M5P,Manta E3 EZ/Kraken/SKR Pico, V4.2.7, MKS Gen L...3d printer control board.
- What You Get This kit consists of BLTouch V3.1 auto leveling sensor, mount and 1 meter extension cable, which may not fit ender 3 pro machine. if you wanna buy extra extension cable, please check the Asin: B08G8B23L7(copy and paste on search bar).
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: ANTCLABS
See On Amazon #10
Automatic Bed Leveling Sensor 3D Touch Auto Leveling for 3D Printers CR-10/Ender 3/ Pro/CR-10S/S4/S5 KP3S KP5
Asin: B09M9V8Y4Y | Model: N2 | PartNumber: N2 | Ean: 0768499602845 | UPC: 768499602845
The 3D Touch Auto Is A Device That Uses The Hall Defect To Achieve Leveling .The Position Of The Point Can Be Obtained By Touching The Point On The Heated Bed ,And Then Compensated By Adjusting The Z-Axis Height During Printing ,Printing Can Also Be Achieved Even Though The Platform Is Not Flat ..
Note2: Pulling/Pushing Hardly On The Push-Pin May Damage Touch Sensor And Make It Less Accurate..
The Main Functions Of Abl And Controls Of Auto Bed Leveling Are The Same As Most Auto Bed Leveling Sensors, Which Consists Of A Rc Servo And A Micro Switch,Thus,3D Touch Can Be Used On Almost Every 3D Printer Control Board..
Automatic Bed Leveling Sensor Is Features Simple, Smart And Precise. It Could Work With Nearly Any Kind Of Bed Materials, Such As Glasses, Woods, Metals And So On. The Position Of The Point Can Be Obtained By Touching The Point On The Heated Bed, And Then Compensated By Adjusting The Z-Axis Height During Printing..
Features
- Automatic Bed Leveling Sensor is Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
- Automatic Bed Leveling Sensor is Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
- The 3D Touch auto is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
- The main functions of ABL and controls of Auto bed Leveling are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D touch can be used on almost every 3D printer control board.
- NOTE2: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate.
- See more on Amazon...
Brand: POJECITY | Manufacturer: M3
See On Amazon #11
Geeetech Upgrade BL- Touch V3.2 Auto Bed Leveling Sensor with 4 Brackets for All Ender 3 Series, Ender 5, Ender 5 Pro, Ender 5s, CR10, CR10 V3 Printer. BL - Touch Kit for 8 or 32 Bit Motherboard
Asin: B0CGLM4QK8
【2 Types Extension Cables】The Auto Bed Leveling Kit Includes 2 Different Length Cables (18Cm/100Cm) Easy To Disassembleset When The Distance Between Your Printer Interface And The 3D Touch Installation Position Is Different, Meet The Wiring Length Needs Of Different Printers..
【After-Sales Service】If You Encounter Unsolvable Problems During Installation And Use The 3D Touch V3.2, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Smart】The Push Pin Of The 3D Touch Sensor Is Operated Two Times To Test When The Power Is On. The Led Light Blinks If A Problem Found On A Self-Test Or On An Operation..
【Wide Application】Geeetech 3D Touch Is Equipped With New Structural Design For Higher Precision, It’S Standard Deviation In Repeatability Is Around 0.003Mm,Can Be Widely Used In Various Fdm 3D Printers And Give You An Enjoyable Experience. Bl-Touch V3.2 Auto Bed Leveling Senor Is Controlled By Hall Effect, Providing High-Precision. Thus The Bed Material Can Be Selected Freely, Glasses/ Wood/ Metal, Etc..
Features
- BL-Tocuh with 4 Mounting Brakets Geeetech 3D touch with 4 mounting brakets, it can compatible with ender 3 series, ender 5, ender 5 Pro, ender 5s, CR10, CR10 V3 Printer. The bed leveling sensor kit includes adapter pinboard so it can be used for 8 or 32 Bit motherboard.
- Wide Application Geeetech 3D touch is equipped with new structural design for higher precision, it s Standard Deviation in repeatability is around 0.003mm,can be widely used in various FDM 3D printers and give you an enjoyable experience. BL-Touch V3.2 auto bed leveling senor is controlled by hall effect, providing high-precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc.
- 2 Types Extension Cables The auto bed leveling kit includes 2 different length cables (18cm/100cm) easy to disassembleset when the distance between your printer interface and the 3D Touch installation position is different, meet the wiring length needs of different printers.
- Smart The push pin of the 3D Touch sensor is operated two times to test when the power is on. The LED light blinks if a problem found on a self-test or on an operation.
- After-sales Service If you encounter unsolvable problems during installation and use the 3D Touch V3.2, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Geeetech | Manufacturer: Geeetech
See On Amazon #12
3DMAN 3D Touch Auto Bed Leveling Sensor for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers
Asin: B08SK62RMR | Ean: 0791738580352 | UPC: 791738580352
The Main Functions And Controls Of 3D Touch Are The Same As Most Auto Bed Leveling Sensors, Which Consists Of A Rc Servo And A Micro Switch,Thus,3D Printer Touch Can Be Used On Almost Every 3D Printer Control Board..
By Using Progressively Designed Solenoid And Hall Sensor, It Can Integrate High Precision In Such A Simple Structure.To Make It More User-Friendly And To Bring You More Enjoyable Printing Experience..
Note: Pulling/Pushing Hardly On The Push-Pin May Damage Touch Sensor And Make It Less Accurate. Any Problem When You Receive The Order, Contact Us First Please!.
Features Simple, Smart And Precise. It Could Work With Nearly Any Kind Of Bed Materials, Such As Glasses, Woods, Metals And So On. The Position Of The Point Can Be Obtained By Touching The Point On The Heated Bed, And Then Compensated By Adjusting The Z-Axis Height During Printing..
Features
- The 3D Touch auto leveling sensor is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
- Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
- The main functions and controls of 3D touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D printer touch can be used on almost every 3D printer control board.
- NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate. Any problem when you receive the order, CONTACT US FIRST please!
- By using progressively designed solenoid and hall sensor, it can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.
- See more on Amazon...
Brand: 3Dman | Manufacturer: 3DMAN
See On Amazon #13
Creality Official CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/Ender-5 Pro with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B08MD45N9H | Model: ZDTP-32 Bit | PartNumber: ZDTP-32 Bit | Ean: 0789430974913 | UPC: 789430974913
Cr Touch Is A Creality Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
Download The Cr Touch Program From The Creative Official Website And Copy It To The Tf/Sd Card. Insert It Directly Into The Card Slot Of The 3D Printer. The Program Can Be Updated After Power On..
Features
- Creality cr touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/CR-10. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers)
- Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
- CR Touch is a Creality research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Skophy
See On Amazon #14
QWORK Auto Bed Leveling Sensor Kit, 3D Printer Touch-Sensor for Ender 3/3S/V2 Ender 5/Pro/CR-10
Asin: B08ZCYDPM7 | Model: WD4810 | PartNumber: WD4810 | Ean: 0781380133624 | UPC: 781380133624
Feature: Smart, High-Precision, Small Error..
Parameter: Working Voltage-5V, Max Current-500Ma..
Fits: It Can Work With Any Kinds Of Bed Materials, Such As Glasses, Woods, Metals, And So On..
Function: The 3D Touch Auto Leveling Sensor Makes Machine Leveling Printing Easier..
Features
- Compatible: This 3D touch fits for Ender3 v2/Ender3/Ender3/Ender5/Ender5 Pro/CR-10 etc.
- Function: The 3D Touch auto leveling sensor makes machine leveling printing easier.
- Feature: Smart, High-precision, Small Error.
- Fits: It can work with any kinds of bed materials, such as glasses, woods, metals, and so on.
- Parameter: Working Voltage-5V, Max current-500mA.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #15
Geeetech 3D Touch V3.2 New Upgrade BL-Touch Auto Bed Leveling Sensor Kit, Accuracy Deviation +/- 0.005mm, 4 Brackets for Ender 3/3 V2/3S/3Pro, Ender 5/5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0CGL48LVC
More Smarter: The Bl-Touch Ender 3 Has A Self-Check Function. After The Power Is Turned On, The Push Pin Will Perform Two Self-Checks. If A Problem Is Detected During The Self-Check Or Operation, The Ai Will Flash The Red Led Indicator. Ensure Proper Installation And Proper Sensor Operation..
What You Can Get: The Package Includes 3D Touch V3.2 Automatic Level Sensor, 4 Brackets And 3 Cables Of Different Lengths (6Cm/18Cm/100Cm), M3 Screws*4, M3 Nuts*4, Connector Plate For 8Bit Motherboard. When Adapting To An 8Bit Motherboard, The Firmware Cannot Be Upgraded Using A Tf Card, So The User Needs To Have Usb Isp Downloader Can Only Use 3D Touch V3.2..
Easy To Use: The Ender 3 Bl-Touch Can Be Used On Heating Beds Made Of Glass, Wood, Metal And Other Materials. It Has A Compact And Simple Structure And Can Be Easily Applied. It Works The Same As The Automatic Bed Leveling Sensor, Which Makes Collecting Information And Setting Firmware Very Simple, Bringing A Simpler And Faster Heated Bed Leveling Experience And Improving Printing Success Rate..
Wider Compatibility: The Bl-Touch Ender 3 V2 Is Supported By Many Firmware Versions, Such As Marlin, Klipper And Repetier. In Addition, Geeetech Bl-Touch Ender 3 Pro Comes With 4 Different Brackets And Is Suitable For More Models, Such As : Ender-3, Ender-5, Ender-3S, Ender-5S, Ender-3 V2, Ender-3 Max, Cr-10, Mizar M, Ender-3 Pro, Ender-5 Pro, Cr-10 V3, Mizar, A10 Series, A20 Series, A30 Series..
Features
- Precision Deviation+/-0.005mm: The bl-touch probe is made of PC plastic material, which has a higher precision and stability, precision deviation+/-0.005mm, ensuring a level print bed for high-quality 3D prints.
- Wider Compatibility: The bl-touch ender 3 v2 is supported by many firmware versions, such as Marlin, Klipper and Repetier. In addition, Geeetech bl-touch ender 3 pro comes with 4 different brackets and is suitable for more models, such as : Ender-3, Ender-5, Ender-3s, Ender-5s, Ender-3 V2, Ender-3 Max, CR-10, Mizar M, Ender-3 Pro, Ender-5 Pro, CR-10 V3, Mizar, A10 Series, A20 Series, A30 Series.
- More Smarter: The bl-touch ender 3 has a self-check function. After the power is turned on, the push pin will perform two self-checks. If a problem is detected during the self-check or operation, the AI will flash the red LED indicator. Ensure proper installation and proper sensor operation.
- Easy to Use: The ender 3 bl-touch can be used on heating beds made of glass, wood, metal and other materials. It has a compact and simple structure and can be easily applied. It works the same as the automatic bed leveling sensor, which makes collecting information and setting firmware very simple, bringing a simpler and faster heated bed leveling experience and improving printing success rate.
- What You Can Get: The package includes 3D Touch V3.2 automatic level sensor, 4 brackets and 3 cables of different lengths (6cm/18cm/100cm), M3 screws*4, M3 nuts*4, connector plate for 8bit motherboard. When adapting to an 8bit motherboard, the firmware cannot be upgraded using a TF card, so the user needs to have USB ISP downloader can only use 3D Touch V3.2.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
Weight: 0.08 Pounds
See On Amazon #16
Geeetech 3D Touch V3.2 Pro BL-Touch Auto Bed Leveling Sensor Kit, 4 Brackets, Accuracy Deviation +/- 0.005mm, for Ender 3/3 V2/3S/3Pro, Ender 5/5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers
Asin: B0CGL94Q4G
High-Performance Kit: The Ender 3 Bl-Touch Auto Bed Leveling Sensor Is Controlled By The Hall Effect, Fulfilling Simple Structure And High Precision, Improving The Printing Success Rate.Thus The Bed Material Can Be Selected Freely, Glasses/ Wood/ Metal, Etc.
What You Can Get: The Package Includes A 3D Touch V3.2 Pro Automatic Level Sensor, 4 Brackets And 3 Cables Of Different Lengths (6Cm/18Cm/100Cm), M3 Screws*4, M3 Nuts*4, Connector Plate For 8Bit Motherboard. When Adapting To An 8-Bit Motherboard, The Firmware Cannot Be Upgraded Using A Tf Card, So The User Needs To Have A Usb Isp Downloader And Can Only Use 3D Touch V3.2 Pro..
More Smarter: The Bl-Touch Ender 3 Has A Self-Check Function. After The Power Is Turned On, The Push Pin Will Perform Two Self-Checks. If A Problem Is Detected During The Self-Check Or Operation, The Ai Will Flash The Red Led Indicator. Ensure Proper Installation And Proper Sensor Operation..
Widely Used: Geeetech Bl-Touch Ender 3 V2 Comes With 4 Different Brackets And Is Suitable For More Models, Such As Ender-3, Ender-5, Ender-3S, Ender-5S, Ender-3 V2, Ender-3 Max, Cr-10, Ender-3Pro Ender-5Pro, Cr-10 V3, Mizar M, Mizar, A10 Series, A20 Series, A30 Series. In Addition, The Bl-Touch Ender 3 Pro Is Supported By Many Firmware Versions, Such As Marlin, Klipper, And Repetier..
Features
- New Appearance Design & Higher Precision: High-end oil painting process for the white part surface. Translucent design for the black part, more fashionable. The bl-touch probe is made of PC plastic material, which has higher precision and stability, the standard deviation in repeatability is around 0.005mm, ensuring a level print bed for high-quality 3D prints.
- Widely Used: Geeetech bl-touch ender 3 v2 comes with 4 different brackets and is suitable for more models, such as Ender-3, Ender-5, Ender-3s, Ender-5s, Ender-3 V2, Ender-3 Max, CR-10, Ender-3Pro Ender-5Pro, CR-10 V3, Mizar M, Mizar, A10 Series, A20 Series, A30 Series. In addition, The bl-touch ender 3 pro is supported by many firmware versions, such as Marlin, Klipper, and Repetier.
- High-performance Kit: The ender 3 bl-touch auto bed leveling sensor is controlled by the hall effect, fulfilling simple structure and high precision, improving the printing success rate.Thus the bed material can be selected freely, glasses/ wood/ metal, etc
- More Smarter: The bl-touch ender 3 has a self-check function. After the power is turned on, the push pin will perform two self-checks. If a problem is detected during the self-check or operation, the AI will flash the red LED indicator. Ensure proper installation and proper sensor operation.
- What You Can Get: The package includes a 3D Touch V3.2 Pro automatic level sensor, 4 brackets and 3 cables of different lengths (6cm/18cm/100cm), M3 screws*4, M3 nuts*4, connector plate for 8bit motherboard. When adapting to an 8-bit motherboard, the firmware cannot be upgraded using a TF card, so the user needs to have a USB ISP downloader and can only use 3D Touch V3.2 Pro.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
See On Amazon #17
Geeetech Upgrade BL- Touch V3.2 Pro Auto Bed Leveling Sensor with 4 Brackets for Ender 3,Ender-3 Pro, Ender 5, Ender 5 Pro, Ender 5s, CR10, CR10 V3 Printer. Bltouch Kit for 8 or 32 Bit Motherboard
Asin: B0CGLM9X1J
【Smart And New Design】The Push Pin Of The Bl-Touch Ender 3 Is Operated Two Times To Test When The Power Is On. The Led Light Blinks If A Problem Found On A Self-Test Or On An Operation.The Ender 3 Bl-Touch Surface Of The White Part Is Made Of High-End Oil Painting Process. The Black Part Adopts Translucent Design, Which Is More Fashionable..
【After-Sales Service】If You Encounter Unsolvable Problems During Installation And Use The Ender 3 Bed Leveling Kit, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours. Tips: When Adapting To An 8-Bit Motherboard, The Firmware Cannot Be Upgraded Using A Tf Card, So The User Needs To Have A Usb Isp Downloader And Can Only Use 3D Touch V3.2 Pro..
【3 Types Extension Cables】The Ender 3 Auto Bed Leveling Kit Includes 3 Different Length Cables (6Cm/18Cm/100Cm) Easy To Disassembleset When The Distance Between Your Printer Interface And The Ender 3 V2 Auto Bed Leveling Kit Installation Position Is Different, Meet The Wiring Length Needs Of Different Printers..
【Bl-Touch With 4 Mounting Brakets】The Bl-Touch Ender 3 Pro With 4 Mounting Brakets, It Can Compatible With Ender-3, Ender-5, Ender-3S, Ender-5S, Ender-3 V2, Ender-3 Max, Cr-10, Ender-3 Pro, Ender-5 Pro, Cr-10 V3, Geeetech Mizar, Mizar M, A10 Series, A20 Series, A30 Series.
Features
- High-performance Kit Geeetech 3D touch V3.2 Pro is equipped with new structural design for higher precision, it s Standard Deviation in repeatability is around 0.003mm, bl- touch bed leveling can be widely used in various FDM 3D printers and give you an enjoyable experience. Bl-touch ender 3 v2 is controlled by hall effect, providing high-precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc.
- Bl-Touch with 4 Mounting Brakets The bl-touch ender 3 pro with 4 mounting brakets, it can compatible with Ender-3, Ender-5, Ender-3s, Ender-5s, Ender-3 V2, Ender-3 Max, CR-10, Ender-3 Pro, Ender-5 Pro, CR-10 V3, Geeetech Mizar, Mizar M, A10 Series, A20 Series, A30 Series
- Smart and New Design The push pin of the bl-touch ender 3 is operated two times to test when the power is on. The LED light blinks if a problem found on a self-test or on an operation.The ender 3 bl-touch surface of the white part is made of high-end oil painting process. The black part adopts translucent design, which is more fashionable.
- 3 Types Extension Cables The Ender 3 auto bed leveling kit includes 3 different length cables (6cm/18cm/100cm) easy to disassembleset when the distance between your printer interface and the ender 3 v2 auto bed leveling kit installation position is different, meet the wiring length needs of different printers.
- After-sales Service If you encounter unsolvable problems during installation and use the ender 3 bed leveling kit, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours. Tips: when adapting to an 8-bit motherboard, the firmware cannot be upgraded using a TF card, so the user needs to have a USB ISP downloader and can only use 3D Touch V3.2 Pro.
- See more on Amazon...
Brand: Geeetech | Manufacturer: Geeetech
See On Amazon #18
Creality CR Touch Auto Bed Leveling Sensor Kit Compatible to Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro/CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer
Asin: B0992JPLGR | Model: CR-touch kit | PartNumber: CR-touch kit
【Easy To Install And Easy To Use】Download The Cr Touch Program From The Creative 3D Official Website And Copy It To The Tf/Sd Card. Insert It Directly Into The Card Slot Of The 3D Printer. The Program Can Be Updated After Power On..
【Strong Compatibility】Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
【Widely Application】This Creality Cr Touch Automatic Leveling Kit Comes With 3 Mounting Brackets, Making It Compatible With Various Types Of 3D Printers, Such As Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / Cr-10 Series. (Note:Only Applicable To 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers).
【Widely Application】This Creality Cr Touch Automatic Leveling Kit Comes With 3 Mounting Brackets, Making It Compatible With Various Types Of 3D Printers, Such As Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / Cr-10 Series. (Note:Only Applicable To 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers).
Features
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Widely Application This Creality CR Touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR-10 series. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers)
- Easy to install and easy to use Download the CR Touch program from the Creative 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on.
- Widely Application This Creality CR Touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR-10 series. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers)
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- See more on Amazon...
Brand: Lutyr | Manufacturer: Creality
See On Amazon #19
HUAREW 3D Touch Probe Pin Replacement, Smart Auto Bed Leveling Push-Pin Needle Self Level Sensor Probe Tips for Bltouch, 3D Touch, CR Touch(Pack of 5 Pcs)
Asin: B09YNBKJ8R | Model: HR-3D PIN-5 | PartNumber: HR-3D PIN-5 | Ean: 0762917457321 | UPC: 762917457321
Simple Installation: Very Easy To Operate, Simple To Install And Use In Combination.
Package Includes: 5 Pcs Touch Sensor Pins.
Compatibility: Compatible For Bl Touch, 3D Touch, Cr Touch..
Quality Material: 3D Touch Probe Pin Made Of High-Quality And Safe Plastic Materials And Has A Long Service Life..
Features
- High precision, intelligent sensor, stable performance, high performance, intelligence.
- Quality material: 3D Touch Probe Pin made of high-quality and safe plastic materials and has a long service life.
- Simple installation: Very easy to operate, simple to install and use in combination
- Compatibility: Compatible for BL touch, 3D touch, CR touch.
- Package includes: 5 PCS touch sensor pins
- See more on Amazon...
Brand: HUAREW | Manufacturer: HUAREW
See On Amazon
Looking For Something Else?
Search