Legines 3/8" Flare Cap, Brass SAE 45 Degree Flare Tube Fitting, Pack of 2
Asin: B07715N52T | Ean: 6937997002707
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flare Fittings On The End Of Copper Tubing Should Provide A Strong Connection To A Fixed Point With A Threaded Nipple..
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Used For Fuel, Oil, Air, Propane, Liquid Petroleum (Lp) And Natural Gas Lines Connections.
It Is Important To Use Flare Fittings When You Are Dealing With A Lot Of Water Pressure Going Through A Pipe Or Are Dealing With High Gas Distribution..
Features
- Flare cap for terminating/closing pipe end
- It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
- Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
- Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon Similar To Legines 3 8 Flare Cap
#1
Legines Brass Flared Plug 3/8" Tube OD, SAE 45 Degree Flare Tube Fitting Pack of 2
Asin: B074Z5RND6 | Model: 39×6 | PartNumber: 39×6 | Ean: 6712441373332
For Use With Lp And Natural Gas, Refrigeration, And Hydraulic Applications.
Low Cost And Reusability, Long Or Short Nut. Good Resistance To Vibration..
Used With: Copper, Brass, Aluminum And Steel Hydraulic Tubing That Can Be Flared..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Hex plug with SAE 45-degree flare male end terminates tube size fitting
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with LP and natural gas, refrigeration, and hydraulic applications
- Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
- Low cost and reusability, long or short nut. Good resistance to vibration.
- See more on Amazon...
Brand: Legines | Manufacturer: legines
Dimensions: 4.33 x 5.51 x 3.94 inches
See On Amazon #2
Hooshing 2PCS 3/8" OD Tube Flare Cap SAE 45 Degree Hex Brass Flare Tube Fitting Female Seal Plug
Asin: B0CF1RMRWS
Used With Copper, Brass, Aluminum And Steel Hydraulic Tubing That Can Be Flared. Flare Fittings On The End Of Tubing Should Provide A Strong Connection To A Fixed Point With A Threaded Nipple..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Low Cost And Reusability, Long Or Short Nut. Good Resistance To Vibration..
Suitable For Fuel, Oil, Air, Propane, Liquid Petroleum (Lp) And Natural Gas Lines Connections, Refrigeration, And Hydraulic Applications..
Features
- Hex flare cap with SAE 45-degree flare female end terminates tube size fitting.
- Suitable for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections, refrigeration, and hydraulic applications.
- Used with copper, brass, aluminum and steel hydraulic tubing that can be flared. Flare fittings on the end of tubing should provide a strong connection to a fixed point with a threaded nipple.
- Low cost and reusability, long or short nut. Good resistance to vibration.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- See more on Amazon...
Brand: Hooshing | Manufacturer: Hooshing
See On Amazon #3
Legines Brass Hex Head Pipe Cap Assortment Kit, 1/8"(4p),1/4"(4p),3/8" (4p),1/2"(2p),3/4"(2p) NPT Female, 16 Pcs
Asin: B07KYFBMHG | Model: PTS-7 | PartNumber: PTS-7
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Used In Low To Medium Pressure Applications..
Male Npt Threads For Connecting To Female Threaded Pipes.
Features
- Cap for terminating male pipe or fitting.
- Male NPT threads for connecting to female threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Used in low to medium pressure applications.
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #4
Joywayus Brass 3/8" Female Flare Cap SAE 45 Degree Tube Fitting Outer Hex Thread Socket Plug Gas Fittings (Pack of 5)
Asin: B0C53DX8XW | Model: 6ZM-FER-71280 | PartNumber: 6ZM-FER-71280
【Material】Heavy Duty Brass, Firm And Durable. Brass For Corrosion Resistance, High Temperature Ductility And Low Magnetic Permeability..
【Use】The Flare Threaded Connects To A Flared Tube Or Fitting, And Is Suitable For Use With Fuel And Gas Systems. Use With Fuel And Gas Systems, Plumbing, Refrigeration, And Vacuum Applications..
【Temperature Range】From -53℃ To 121℃ (-65℉ To 250℉)..
【Flare Thread】Flared Tube Connection On One End. Easy To Disassemble No Flaring Tool Required. Teflon Tape And Thread Sealant Are Recommended For Threaded Joints..
Features
- Size 5PCS 3/8" Flare Female Outer Hex Caps
- Flare Thread Flared tube connection on one end. Easy to disassemble no flaring tool required. Teflon tape and thread sealant are recommended for threaded joints.
- Material Heavy Duty Brass, firm and durable. Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
- Temperature Range From -53 to 121 (-65 to 250 ).
- USE The flare threaded connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. Use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
- See more on Amazon...
Brand: Joywayus | Manufacturer: Joywayus
See On Amazon #5
64 Pcs Hydraulic Hose Caps and Plugs Kit, 37 JIC Cap and Plug Assortment Kit, Heavy Duty Seal Adapter Kit with Precision Threads, Steel Flare Fitting Set, Dash Sizes 4 6 8 10 12 16
Asin: B0C6KN893M | Ean: 0662987999199 | UPC: 662987999199
Wide Applications --- Our Hydraulic Cap And Plug Kit Are Designed For Intense Industrial Settings, Being Able To Withstand High Psi Pressure Levels And Temperatures, Even In Extreme Operating Environments. This Hydraulic Cap And Plug Kit Are Work Great For Hydraulic Repairs.The Jic Caps And Plugs Are Sealed Quickly Keep Hydraulics Lines From Fluid Leaking When Remove Fluids Hydraulic Application/Machinery Work/ Truck/Chemical Processing Systems..
Easy To Use ---The Fittings Are Clean And Fit On Hoses And Other Fittings Nicely Without Any Restriction From A Burr Or Poor Thread Cut,They Actually Fit Well, Tightened And Released Cleanly, Met Your Need..
Better Safe Than Sorry --- These Jic Kits Seal And Protect The Ends Of Hydraulic Hose And Tube Fittings To Prevent Hydraulic Liquids From Leaking Onto The Ground Or Into Your Or Your Client's Machine. While You Perform Preventive Maintenance, It Also Stops Contaminants Such As Dirt, Dust, Moisture, And Sand From Entering And Damaging Your Machine's Sensitive And Expensive Parts, Such As Pumps Motors, Valves, And Cylinders..
Higher Quality --- Our Jic Cap And Plug Kit Meeting Or Exceeding Sae J514 Conventions. These Industrial Heavy-Duty Jic Fittings Are Made From Premium Carbon Steel Galvanized With Robust And Long-Lasting Zinc, Which Prevents Rust, Corrosion, And Degradation, Even With Extended Use. Over Time These Fittings Are Exposed To Hose Fluid, So This Durability Is Essential..
Features
- 64 FITTINGS KITS ---This jic plug and cap kit include the six most used caps and plugs sizes: #4 (7/16-20), #6 (9/16-18), #8 (3/4-16), #10 (7/8-14), #12 (1 1/16-12), #16 (1 5/16-12)
- HIGHER QUALITY --- Our JIC cap and plug kit meeting or exceeding SAE J514 conventions. These industrial heavy-duty JIC fittings are made from premium carbon steel galvanized with robust and long-lasting zinc, which prevents rust, corrosion, and degradation, even with extended use. Over time these fittings are exposed to hose fluid, so this durability is essential.
- WIDE APPLICATIONS --- Our hydraulic cap and plug kit are designed for intense industrial settings, being able to withstand high PSI pressure levels and temperatures, even in extreme operating environments. This hydraulic cap and plug kit are work great for hydraulic repairs.The JIC caps and plugs are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
- BETTER SAFE THAN SORRY --- These JIC kits seal and protect the ends of hydraulic hose and tube fittings to prevent hydraulic liquids from leaking onto the ground or into your or your client's machine. While you perform preventive maintenance, it also stops contaminants such as dirt, dust, moisture, and sand from entering and damaging your machine's sensitive and expensive parts, such as Pumps Motors, Valves, and Cylinders.
- EASY TO USE ---The fittings are clean and fit on hoses and other fittings nicely without any restriction from a burr or poor thread cut,They actually fit well, tightened and released cleanly, met your need.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Weight: 1.50 Kilograms
See On Amazon #6
Legines Brass Inverted Flare Fitting, Barstock Brake Line 90 Degree Male Elbow, 3/16" Tube OD x 1/8" NPT Male, Pack of 2
Asin: B077GRJHR6 | Ean: 6937997091428
For Use With Liquid Petroleum (Lp) And Natural Gas, Refrigeration, Hydraulic Brake, Trans-Mission Cooler Lines, Fuel, Oil, Air, Lines, Power Steering..
Working Pressure Up To 2000Psi Depending On Tube (O.D),Will Withstand Burst Pressure 5000Psi With Bundy-Weld..
Not For Use In Potable Drinking Water Applications.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Adapts NPT male end to tube female end at a 90-degree angle.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
- Not for use in potable drinking water applications
- Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #7
Legines Brass Inverted Flare Fitting, Brake Line 45 Degree Male Elbow, 3/16" Tube OD x 1/8" NPT Male, Pack of 2
Asin: B077GQ32CV | Ean: 6937997091381
For Use With Liquid Petroleum (Lp) And Natural Gas, Refrigeration, Hydraulic Brake, Trans-Mission Cooler Lines, Fuel, Oil, Air, Lines, Power Steering..
Working Pressure Up To 2000Psi Depending On Tube (O.D),Will Withstand Burst Pressure 5000Psi With Bundy-Weld..
Not For Use In Potable Drinking Water Applications.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Features
- Adapts NPT male to tube at a 45-degree angle.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
- Not for use in potable drinking water applications
- Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #8
TAODAN 2PCS 3/8'' Brass Tube Fitting, SAE 45 Degree Flare Fitting, Cap Nut
Asin: B0BQ38DRBT | Model: PS-BTFFFCN-2-TD | PartNumber: PS-BTFFFCN-2-TD
Used For The Connection Of Fuel, Petroleum, Air, Propane, Liquefied Petroleum Gas (Lp) And Natural Gas Pipelines..
Temperature Range: -65 To 250 Degrees Fahrenheit; 1000 Psi Maximum Pressure..
Made Of Forged Brass..
The Flare Fitting At The End Of The Copper Pipe Should Be Firmly Fixed To The Fixed Point By A Threaded Joint..
Features
- Used with brass, copper, iron pipes (3/8" outside diameter), used to close male pipes or pipe joint ends.
- The flare fitting at the end of the copper pipe should be firmly fixed to the fixed point by a threaded joint.
- Used for the connection of fuel, petroleum, air, propane, liquefied petroleum gas (LP) and natural gas pipelines.
- Made of forged brass.
- Temperature range: -65 to 250 degrees Fahrenheit; 1000 PSI maximum pressure.
- See more on Amazon...
Brand: TAODAN | Manufacturer: TAODAN
See On Amazon #9
Legines Brass Inverted Flare Fitting, Brake Line Adapter, Male Connector, 3/8" Tube OD x 3/8" NPT Male, Pack of 2
Asin: B077GMQCMF | Ean: 6937997091299
For Use With Liquid Petroleum (Lp) And Natural Gas, Refrigeration, Hydraulic Brake, Trans-Mission Cooler Lines, Fuel, Oil, Air, Lines, Power Steering..
Working Pressure Up To 2000Psi Depending On Tube (O.D),Will Withstand Burst Pressure 5000Psi With Bundy-Weld..
Not For Use In Potable Drinking Water Applications..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Adapts NPT male end to flared tubing female end.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
- Not for use in potable drinking water applications.
- Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #10
Legines Brass Tube Fitting, Tee, 1/2" Compression x 3/8" Bottom NPT Male Pipe, Pack of 2
Asin: B075ZPZ1TZ | Ean: 6806299443085
Standard Fittings Use Short Nuts,Easy To Disassemble No Flaring Tool Required.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Primary Uses Water, Gasoline, Oil And Vacuum Lines.
Use With Copper, Brass, Aluminum, Or Plastic Tubing.
Features
- Three piece construction - nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts,Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.12 x 1.97 inches | Weight: 0.11 Pounds
See On Amazon #11
Legines Brass SAE 45 Degree Flared Tube Fitting, Long Flare Nut, 1/8" Tube OD (2 pcs)
Asin: B074Z5GNTJ | Ean: 6712441373219
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Operating Temperature Range Of -65 To +250 Degrees F,Resists Mechanical Pullout For A More Secure Connection.
For Use With Lp And Natural Gas, Refrigeration, And Hydraulic Applications.
Features
- Long flare nut for connecting to a tube or fitting
- For use with LP and natural gas, refrigeration, and hydraulic applications
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F,Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
Dimensions: 4.33 x 5.51 x 3.94 inches | Weight: 0.02 pounds
See On Amazon #12
Legines Brass Inverted Flare Female Brake Line Adapter Fitting, Female Connector, 3/8" Tube OD x 1/4" NPT Female, Pack of 2
Asin: B077GPF3HY | Ean: 6937997091367
For Use With Liquid Petroleum (Lp) And Natural Gas, Refrigeration, Hydraulic Brake, Trans-Mission Cooler Lines, Fuel, Oil, Air, Lines, Power Steering..
Working Pressure Up To 2000Psi Depending On Tube (O.D),Will Withstand Burst Pressure 5000Psi With Bundy-Weld..
Not For Use In Potable Drinking Water Applications..
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Adapts 1/8" NPT female end to 5/16" tube size female end
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
- Not for use in potable drinking water applications.
- Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #13
Legines Brass Tube Fitting, SAE 45 Degree Flare Plug, 1/4" Tube OD 5 pcs
Asin: B075S2DMYR | Ean: 6131677149373
For Use With Lp And Natural Gas, Refrigeration, And Hydraulic Applications.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Hex plug with SAE 45-degree flare male end terminates tube size fitting
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with LP and natural gas, refrigeration, and hydraulic applications
- See more on Amazon...
Brand: Legines | Manufacturer: legines
Dimensions: 4.33 x 5.51 x 3.94 inches | Weight: 0.04 Pounds
See On Amazon #14
Legines Brass Inverted Flare Fitting Tube Nut, Brake Line Plug, 3/8" Tube OD, Pack of 2
Asin: B077GLK4S5 | Ean: 6937997091121
For Use With Liquid Petroleum (Lp) And Natural Gas, Refrigeration, Hydraulic Brake, Trans-Mission Cooler Lines, Fuel, Oil, Air, Lines, Power Steering..
Working Pressure Up To 2000Psi Depending On Tube (O.D),Will Withstand Burst Pressure 5000Psi With Bundy-Weld..
Not For Use In Potable Drinking Water Applications.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- Tube nut for use with inverted flared tubing
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
- Not for use in potable drinking water applications
- Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #15
Legines Brass Inverted Flare Fitting,Brake Line Union, 3/8" Tube OD x 3/8" Tube OD, Pack of 2
Asin: B077GLRTT7 | Ean: 6937997091183
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Not For Use In Potable Drinking Water Applications..
For Use With Liquid Petroleum (Lp) And Natural Gas, Refrigeration, Hydraulic Brake, Trans-Mission Cooler Lines, Fuel, Oil, Air, Lines, Power Steering..
Style Is A Inverted Flare Union And Is A Straight Style Fitting..
Features
- Brake line adapter fitting is made from quality brass.
- Style is a inverted flare union and is a straight style fitting.
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering.
- Not for use in potable drinking water applications.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #16
Legines Brass SAE 45 Degree Flare Tube Fitting, Male 90 Degree Elbow, 3/16" Flare x 1/8" NPT Male, 2 Pcs
Asin: B07529LJP9 | Ean: 6712441373783
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Military Standard Mil-F-18866 Compliant, Society Of Automotive Engineers Standard Sae J514 Compliant For 37-Degree Jic Fla.
Standard Duty For Light To Medium Pressure Applications.
Male Sae 45-Degree Threads On One End And Male Pipe Threads On The Other End For Connecting Two Threaded Pipes.
Features
- Society of Automotive Engineers (SAE) 90-degree male 45-degree elbow for connecting a tube to a female pipe thread at a 90-degree angle
- Male SAE 45-degree threads on one end and male pipe threads on the other end for connecting two threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Standard duty for light to medium pressure applications
- Military standard MIL-F-18866 compliant, Society of Automotive Engineers standard SAE J514 compliant for 37-degree JIC fla
- See more on Amazon...
Brand: Legines | Manufacturer: legines
Dimensions: 5.12 x 5.51 x 1.97 inches | Weight: 0.07 Pounds
See On Amazon #17
Legines Brass Pipe Fitting, 3/8" NPT Male Slotted Pipe Plug, 5 pcs
Asin: B07BHFQTHB | Ean: 6627145139163
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Male Npt Threads For Connecting To Female Threaded Pipes.
Features
- Slotted plug for closing the end of a pipe or fitting
- Male NPT threads for connecting to female threaded pipes
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon #18
Legines Brass D.OT. Air Brake Fitting for Nylon Tubing, 90 Degree Male Elbow, 3/8" OD x 1/2" NPT Male, 2 pcs
Asin: B077467YSP | Ean: 6937997090001
Ribbed Sleeve For Compression And Positive Grip..
Meets D.O.T. Fm's 571.106, Sae J246 And Sae J1131..
Stainless Steel Tube Support.
For Use In Air Brake Systems On Semi-Trucks, Trailers, Buses, Mobile Equipment And Farm Implements.
Features
- D.O.T. Compression style fittings for repairing truck and trailer air brake lines
- For Use in air brake Systems on semi-trucks, trailers, buses, mobile equipment and farm implements
- Ribbed sleeve for compression and positive grip.
- Stainless steel tube support
- Meets D.O.T. FM's 571.106, SAE J246 and SAE J1131.
- See more on Amazon...
Brand: Legines | Manufacturer: Legines
See On Amazon
Looking For Something Else?
Search