PepeTools Ultra Power Electric Double Rolling Mills Wire and Flat 130mm, MADE IN THE USA
Asin: B0774YZXFD | Model: 189.30.00.EL-110V Double Flat/Wire | PartNumber: 189.30.00.EL-110V Double Flat/Wire | Ean: 0730792705349 | UPC: 730792705349
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flat Rolling Mill: Rollers 130Mm Wide X 65Mm Diameter.
Overload Protection; Under Voltage / Overvoltage Protection; Short Circuit Protection, Phase To Phase; Electronic Inrush Current Limit (Eicltm) Protection.
Wire Rolling Mill Rollers: Square: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5; Round: 2.0, 3.0, 4.0, 5.0, 6.0 Comfort Fit: 8 X 2.25; 7 X 2.25; 6 X 2.0; 5 X 2.0; 4 X 1.25; Ellipse: 2.50 X 1 And 3.0 X 1.25 And 4.0 X 1.50.
Maximum Roller Opening: 0-7.5Mm; Rolling Mill Body Is One-Piece Precision Cast Construction For Ultra Strength And Durability; Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty.
Features
- Two Powered Rolling Mills 130mm wide X 65mm Diameter; Mirror finished and induction hardened to 60-62 HRC Nominal torque output 2880 Inch-Lb (33 Kg/m)
- MAXIMUM ROLLER OPENING: 0-7.5mm; Rolling Mill Body is one-piece precision cast construction for ULTRA strength and durability; Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty
- Flat Rolling Mill: Rollers 130mm wide X 65mm Diameter
- Wire Rolling Mill Rollers: SQUARE: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5; ROUND: 2.0, 3.0, 4.0, 5.0, 6.0 COMFORT FIT: 8 x 2.25; 7 x 2.25; 6 x 2.0; 5 x 2.0; 4 x 1.25; ELLIPSE: 2.50 x 1 and 3.0 x 1.25 and 4.0 x 1.50
- Overload protection; Under voltage / Overvoltage Protection; Short Circuit Protection, phase to phase; Electronic Inrush Current Limit (EICLTM) Protection
- See more on Amazon...
Brand: Ultra Combo Wire Mill and Flat Mill | Manufacturer: PepeTools
Dimensions: 17.25 x 29.75 x 10.00 inches | Weight: 153.00 pounds
See On Amazon Similar To PepeTools Ultra Power Electric Double
#1
PepeTools Plating System, IPS-PRO 25amp/12volt Programmable Intelligent Plating System
Asin: B01CKFSQXA | Model: IPS- 25 PRO | PartNumber: IPS- 25 PRO | Ean: 0730792704076 | UPC: 730792704076
Each Is Available With A Full Digital Display, One Button Reverse Polarity, Dual Voltage, And Auto Short Protection;.
Solution Coil Heater That Fits Into A 1000Ml Beaker; Accurate Up To +/- 1 Degree C/F; Fully Programmable Heat In Either Degress Fahrenheit Or Celsius.
All In One Plating System; Amp (Minute/Hour) Meter; Ultra Precision Voltage Control, Precise Power For Precise Plating.
Each Individual Program Can Store Plating Time, Reverse Polarity Time; Current Voltage, Current Amperage; And Start Delay.
Features
- INCLUDED in the box are the Intelligent Power Supply -IPS; Coil Heater; Power Cord; Set of Lead Wires; and User Manual; Digital display, auto dual voltage, instant polarity change
- Each individual program can store Plating Time, Reverse Polarity Time; Current Voltage, Current Amperage; and Start Delay
- Each is available with a Full digital display, One button Reverse Polarity, Dual Voltage, and Auto Short Protection;
- All in one plating system; amp (minute/hour) meter; Ultra precision voltage control, precise power for precise plating
- Solution Coil Heater that fits into a 1000ML Beaker; Accurate up to +/- 1 degree C/F; Fully programmable heat in either degress Fahrenheit or Celsius
- See more on Amazon...
Brand: Intelligent Plating System | Manufacturer: PepeTools
Dimensions: 6.00 x 9.50 x 4.50 inches | Weight: 4.20 pounds
See On Amazon #2
PepeTools Ultra Power Electric Double Flat and Combination Mills 130mm, USA MADE
Asin: B01LYD45RN | Ean: 0730792704557 | UPC: 730792704557
Maxumum Roller Opening: 0-7.5Mm; Production Output - 7.5 Ft/Min Or 2.3 M/Min Center Dial 0-100: Regulates Speed At Which The Rollers Turn.
Overload Protection; Under Voltage / Overvoltage Protection; Electronic Inrush Current Limit (Eicltm) Protection; Run/Fault Relay Output Contacts.
Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty; Nominal Torque Output 2880 Inch-Lb (33 Kg/M).
Flat Roller 130Mm Wide X 65Mm Diameter.
Features
- Combination Roller: Square Wire( mm): 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5 Flat Area: 66mm Wide x 65mm Diameter; Half Round Ellipses (mm): 2.5x1.0; 3.0x1.25; 4.0x1.50
- Flat Roller 130mm wide X 65mm Diameter
- Maxumum Roller Opening: 0-7.5mm; Production Output - 7.5 Ft/min or 2.3 m/min Center Dial 0-100: Regulates speed at which the rollers turn
- Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty; Nominal torque output 2880 Inch-Lb (33 Kg/m)
- Overload protection; Under voltage / Overvoltage Protection; Electronic Inrush Current Limit (EICLTM) Protection; Run/Fault Relay Output Contacts
- See more on Amazon...
Brand: Ultra Power | Manufacturer: PepeTools
Dimensions: 19.00 x 31.00 x 15.00 inches | Weight: 153.00 pounds
See On Amazon #3
PepeTools Ultra Power Electric Double Combination Mills 130mm, MADE IN THE USA
Asin: B01LY1IUX6 | Ean: 0730792704540 | UPC: 730792704540
Maximum Opening 0-7.5Mm; Production Output: 2.3M/Min., 120 V; Variable Speed 0-12 Rpm.
Overload Protection; Under Voltage / Overvoltage Protection; Electronic Inrush Current Limit (Eicltm) Protection; Run/Fault Relay Output Contacts.
Center Dial 0-100: Regulates Speed At Which The Rollers Turn.
Features
- Two Combination Rollers: 66mm Flat Area; Three Half Round Ellipses of 2.5mm wide x 1.0mm deep, 3.0mm wide x 1.25 deep and 4.0mm wide by 1.50 deep; Square Wire: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5
- Center Dial 0-100: Regulates speed at which the rollers turn
- Maximum Opening 0-7.5mm; Production Output: 2.3m/min., 120 V; Variable Speed 0-12 RPM
- Overload protection; Under voltage / Overvoltage Protection; Electronic Inrush Current Limit (EICLTM) Protection; Run/Fault Relay Output Contacts
- See more on Amazon...
Brand: Ultra Power | Manufacturer: PepeTools
Dimensions: 17.50 x 29.75 x 10.00 inches | Weight: 153.00 pounds
See On Amazon #4
PepeTools Plating System, IPS-PLUS 10amp/12volt Programmable Intelligent Plating System
Asin: B01CKE623M | Model: IPS- 10 Plus | PartNumber: IPS- 10 Plus | Ean: 0730792704021 | UPC: 730792704021
Each Plating System Is Available With A Full Digital Display, One Button Reverse Polarity, Dual Voltage, And Auto Short Protection.
Ultra Precision Voltage Control, Precise Power For Precise Plating.
All In One Plating System; Amp (Minute/Hour) Meter (Pro/Plus Models); Fully Programable Ft. 1 Button Intuitive Programming.
Individual Programs Can Store Plating Time, Reverse Polarity Time; Current Voltage, Current Amperage; And Start Delay.
Features
- INCLUDED inside the box are the Intelligent Power Supply-IPS; Power Cord; Set of Lead Wires; and User Manual
- Individual programs can store Plating Time, Reverse Polarity Time; Current Voltage, Current Amperage; and Start Delay
- Each plating system is available with a Full digital display, One button Reverse Polarity, Dual Voltage, and Auto Short Protection
- All in one plating system; amp (minute/hour) meter (Pro/Plus models); Fully Programable ft. 1 button Intuitive Programming
- Ultra precision voltage control, precise power for precise plating
- See more on Amazon...
Brand: Intelligent Plating System | Manufacturer: PepeTools
Dimensions: 6.00 x 9.52 x 4.50 inches | Weight: 4.10 pounds
See On Amazon #5
PepeTools Ultra Power Electric Double Flat Rolling Mills 130mm, MADE IN THE USA
Asin: B01LYOXI42 | Model: 189.00.00. EL‐110V | PartNumber: 189.00.00. EL‐110V | Ean: 0730792704533 | UPC: 730792704533
Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty.
Overload Protection; Under Voltage / Overvoltage Protection; Short Circuit Protection, Phase To Phase; Electronic Inrush Current Limit (Eicltm) Protection.
Maximum Roller Opening: 0-7.5Mm; Production Output - 7.5 Ft/Min Or 2.3 M/Min; Nominal Torque Output 2880 Inch-Lb (33 Kg/M).
Rolling Mill Body Is One-Piece Precision Cast Construction For Ultra Strength And Durability.
Features
- Two Flat Rollers 130mm wide X 65mm Diameter; Mirror finished and induction hardened to 60-62 HRC
- Rolling Mill Body is one-piece precision cast construction for ULTRA strength and durability
- Industrial Grade - Heavy Duty Worm Gearbox* - Rated 12,000 Hours Continues Duty
- Maximum Roller Opening: 0-7.5mm; Production Output - 7.5 Ft/min or 2.3 m/min; Nominal torque output 2880 Inch-Lb (33 Kg/m)
- Overload protection; Under voltage / Overvoltage Protection; Short Circuit Protection, phase to phase; Electronic Inrush Current Limit (EICLTM) Protection
- See more on Amazon...
Brand: Ultra Power | Manufacturer: PepeTools
Dimensions: 17.25 x 29.75 x 10.00 inches | Weight: 153.00 pounds
See On Amazon
Looking For Something Else?
Search