Yonaka 3" Stainless Steel Performance Exhaust Compatible/Replacement for 2004-2008 Subaru Forester XT
Asin: B077NQFW1N
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
3" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 3 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Weight: 29.00 pounds
See On Amazon Similar To Yonaka 3 Stainless Steel Performance
#1
Moioee Stainless Steel Exhaust Flange Connection Kit, 3.0 Inch 2 Bolt Automobile Exhaust Pipe Flange and Interface Gasket Set, Including 2 Flange Hexagon Head Bolts and 2 Flange Hexagon Nuts
Asin: B0BVM3YZQ9 | Model: Exhaust Flange | PartNumber: Exhaust Flange
【Excellent Function】: These Stainless Steel Flanges Have Excellent Performance, Powerful, It Can Be Used As Automotive Exhaust Pipe Sealing Kit, Exhaust Pipe Flange Can Increase The Sealing Performance, Effectively Prevent Leakage, And Adjust The Gap Between The Parts To Ensure Stable Performance Of The Exhaust Pipe Parts..
【Widely Use】: Stainless Steel Flange Is Widely Used For Exhaust, Turbocharger, Silencer, Intercooler And Other Equipment Piping Connection. High Temperature And Corrosion Resistance, And Not Easy To Fall Off, Good Sealing, Suitable For Warehouses, Power Generation Industry, Communications Industry, Light Industry And Many Other Fields..
【Easy Installation】: These Stainless Steel Flanges Are Simple To Install, With Eyelets On The Flanges To Thread Bolts To Make The Two Flanges Tightly Connected. Gaskets Are Used To Seal Between The Flanges. The Gasket Is Placed Between The Sealing Surfaces Of The Two Flanges, And The Nut Is Tightened To Make The Pipe Fitting Connection Fixed And Sealed..
【Good Sealing & Heat Resistant】: These Stainless Steel Flanges Are Selected Good Material Mouth, Good Air Tightness, Durable, Not Easy To Rust, Strong And Stable Enough, With Reliable Sealing, But Also Resistant To High And Low Temperature, Selection Of Stainless Steel Material To Ensure A Long Service Life, You Can Rest Assured To Use It For A Long Time..
Features
- Well-Made : Our car exhaust flange is made of stainless steel, the choice of excellent raw materials, stainless steel forging, not easy to acid and alkali, not easy to corrosion, to ensure reliable quality, the use of precision casting process, the surface of fine polishing treatment, beautiful appearance, smooth and burr-free, bright appearance and good performance.
- Good Sealing & Heat resistant : These stainless steel flanges are selected good material mouth, good air tightness, durable, not easy to rust, strong and stable enough, with reliable sealing, but also resistant to high and low temperature, selection of stainless steel material to ensure a long service life, you can rest assured to use it for a long time.
- Excellent Function : These stainless steel flanges have excellent performance, powerful, it can be used as automotive exhaust pipe sealing kit, exhaust pipe flange can increase the sealing performance, effectively prevent leakage, and adjust the gap between the parts to ensure stable performance of the exhaust pipe parts.
- Easy Installation : These stainless steel flanges are simple to install, with eyelets on the flanges to thread bolts to make the two flanges tightly connected. Gaskets are used to seal between the flanges. The gasket is placed between the sealing surfaces of the two flanges, and the nut is tightened to make the pipe fitting connection fixed and sealed.
- Widely Use : Stainless steel flange is widely used for exhaust, turbocharger, silencer, intercooler and other equipment piping connection. High temperature and corrosion resistance, and not easy to fall off, good sealing, suitable for warehouses, power generation industry, communications industry, light industry and many other fields.
- See more on Amazon...
Brand: Moioee | Manufacturer: Moioee
Dimensions: 0.13 x 1.80 x 1.20 inches
Warranty: 0.2
See On Amazon #2
RACOONA 2PCS Exhaust Gasket,Car Accessories High Temp Exhaust Gasket with SS Fire Ring,Bolt Exhaust Flange Gasket,Exhaust Gasket Replacement,Used for Exhaust Turbo Catback Headers (2.25")
Asin: B0CJ6PTZN4 | Model: 2.25" | PartNumber: 2.25"
[Specifications] We Provide 4 Different Specifications Of Exhaust Flange Gaskets For You To Choose From. The Bolt To Bolt Distance For A 2.5 "Gasket Is 3"/76Mm; The Bolt To Bolt Distance For A 2.25 "Gasket Is 3"/76Mm; The Bolt To Bolt Distance For A 3 "Gasket Is 3.5"/89Mm; And The Bolt To Bolt Distance For A 3.5 "Gasket Is 3.875"/98Mm..
[Perfect Replacement] The Quality Of The 3-Bolt Exhaust Flange Gasket Meets Or Exceeds The Original Accessory, Ensuring Optimal Performance On The Road. Perfect For Replacing Old Parts..
[Easy To Install] The Exhaust Gasket Has Slotted Bolt Holes (If Applicable) For Easy Installation, And The Gasket Can Slide Into Place For Better Bonding..
[Application] The Exhaust Gasket Is Suitable For Heavy-Duty Mlsg Structures In Extreme Environments And Can Be Used For Exhaust Turbine Downcomer Manifolds..
Features
- [High Quality Material] The high-temperature exhaust gasket is made of high-quality stainless steel, which is wear-resistant, resistant to high and low temperatures, not easy to break, and sturdy and durable.
- [Application] The exhaust gasket is suitable for heavy-duty MLSG structures in extreme environments and can be used for exhaust turbine downcomer manifolds.
- [Specifications] We provide 4 different specifications of exhaust flange gaskets for you to choose from. The bolt to bolt distance for a 2.5 gasket is 3/76mm; the bolt to bolt distance for a 2.25 gasket is 3/76mm; the bolt to bolt distance for a 3 gasket is 3.5/89mm; and the bolt to bolt distance for a 3.5 gasket is 3.875/98mm.
- [Easy to Install] The exhaust gasket has slotted bolt holes (if applicable) for easy installation, and the gasket can slide into place for better bonding.
- [Perfect Replacement] The quality of the 3-bolt exhaust flange gasket meets or exceeds the original accessory, ensuring optimal performance on the road. Perfect for replacing old parts.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
See On Amazon #3
Yonaka EG Compatible with 92-95 Honda Civic 2DR/4DR Coupe Sedan Performance Exhaust (DX EX LX)
Asin: B009R6ZQDO
4.25" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included, Sound Clip Video Available Upon Request.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 4.25 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 12.00 x 43.00 x 15.00 inches | Weight: 29.00 Pounds
See On Amazon #4
Yonaka 2.5" Stainless Steel Performance Exhaust Compatible/Replacement for Honda CR-V 1996-2001
Asin: B00IT3EJ8O
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 16.00 x 50.00 x 11.00 inches | Weight: 29.00 pounds
See On Amazon #5
Yonaka Acura RSX Type-S 2002-2006 2.5" Stainless Steel Performance Exhaust
Asin: B00OBVYB86
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 17.00 x 41.00 x 12.00 inches | Weight: 29.00 pounds
See On Amazon #6
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for Honda Civic 2001-2005 2DR/4DR (1.7L only)
Asin: B00PR8VR66
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 15.00 x 51.00 x 13.00 Inches | Weight: 29.00 pounds
See On Amazon #7
Yonaka Mazda Miata 1990-1997 2.5" Stainless Steel Performance Exhaust
Asin: B00IT3EKB0
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 18.00 x 48.00 x 10.00 inches | Weight: 26.00 pounds
See On Amazon #8
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for 2002-2005 Honda Civic 3DR Hatch 2.0L (EP3)
Asin: B07DPVBS29
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Clean, Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Clean, deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Weight: 29.00 pounds
See On Amazon #9
Yonaka 3" OD Polished Stainless Steel 180 Degree Bend Pipe Tube Elbow 12" Leg
Asin: B00VXFXESQ
12" Legs.
Polished To A Mirror Finish.
Ideal For Fabricating Exhausts, Intercooler Piping, Headers, Intakes, Etc..
180 Degree Mandrel Bend.
Features
- High quality automotive grade stainless steel
- 180 degree mandrel bend
- 12 legs
- Ideal for fabricating exhausts, intercooler piping, headers, intakes, etc.
- Polished to a mirror finish
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Weight: 5.40 pounds
See On Amazon #10
Yonaka Polished Stainless Steel Universal Performance Exhaust Hanger Rods (3/8" x 9.5") 10 pack
Asin: B01JQB9JXC
Secures Properly Inside Factory And Aftermarket Rubber Hangers.
1 Year Warranty.
Universal Fitment For Use With Almost Any Custom Exhaust Project.
Comes In Packs Of 10 Pcs.
Features
- Polished 304 stainless steel
- Comes in packs of 10 pcs
- Secures properly inside factory and aftermarket rubber hangers
- Universal fitment for use with almost any custom exhaust project
- 1 year warranty
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Weight: 5.00 pounds
See On Amazon #11
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for Honda Ridgeline 2006-2014
Asin: B013VMHY34
Clean, Deep Hum, Without The Irritating Mid Range Raspy Sound.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Direct Bolt On Fit To Oem.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- Clean, deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 18.00 x 43.00 x 13.00 inches | Weight: 29.00 pounds
See On Amazon #12
Yonaka 3" Performance Exhaust Compatible/Replacement for Honda Civic 2012-2015 2DR Coupe (Si)
Asin: B07B9GVYKN
4" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
3" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 3 mandrel bent piping
- 4 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 21.00 x 50.00 x 9.00 Inches | Weight: 29.00 pounds
See On Amazon #13
Yonaka 3" Performance Exhaust Compatible/Replacement for Honda Civic 2012-2015 4DR Sedan (Si)
Asin: B06Y2F5YR5
4" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
3" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 3 mandrel bent piping
- 4 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 21.00 x 50.00 x 9.00 inches | Weight: 29.00 pounds
See On Amazon #14
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for Honda Civic 88-91 EF 3DR Hatch Only
Asin: B009R6ZRH4
4.25" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem (3-Bolt Midpipe), All Installation Hardware Included, Sound Clip Video Available Upon Request.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.25'' Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.25'' mandrel bent piping
- 4.25 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM (3-bolt midpipe), all installation hardware included, sound clip video available upon request
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 23.00 x 51.00 x 9.00 inches | Weight: 29.00 pounds
See On Amazon #15
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for Honda Fit 2009-2013
Asin: B013V4QMPS
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
50-60Mm Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 50-60mm mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 15.00 x 50.00 x 8.00 inches | Weight: 25.00 pounds
See On Amazon #16
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for Honda Element 2003-2006 DX EX LX (FWD Only)
Asin: B00QVL2O5Q
3" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem (Front Wheel Drive Only), All Installation Hardware Included.
Clean, Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3 stainless steel exhaust tip
- Clean, deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM (Front Wheel Drive only), all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 19.00 x 39.00 x 9.00 Inches | Weight: 27.00 pounds
See On Amazon #17
Yonaka 2-1 Stainless Steel Exhaust Merge Collector - 3.0" ID Dual to 3.0" OD Single (Polished)
Asin: B09CZGQTZW
Tig Welded.
Perfect For Your Next Fab Project.
8.25" End To End Length.
Dual 3.0" Id And Single 3.0" Od.
Features
- T304 polished stainless steel
- Dual 3.0 ID and single 3.0 OD
- Tig welded
- 8.25 end to end length
- Perfect for your next fab project
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 10.00 x 10.00 x 4.00 inches | Weight: 2.00 pounds
See On Amazon #18
Yonaka Stainless Steel Performance Exhaust Compatible/Replacement for 2003-2005 Honda Accord 4-CYL 4-DR
Asin: B079835T3Y
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 27.00 x 40.00 x 10.00 Inches | Weight: 29.00 pounds
See On Amazon #19
Yonaka 2.5" Stainless Steel Performance Exhaust compatible with Nissan Sentra 2007-2012 (2.0L only)
Asin: B00PUORB0I
3.5" Stainless Steel Exhaust Tip.
Direct Bolt On Fit To Oem, All Installation Hardware Included.
Quiet, Clean, And Deep Hum, Without The Irritating Mid Range Raspy Sound.
2.5" Mandrel Bent Piping.
Features
- Fully polished stainless steel
- 2.5 mandrel bent piping
- 3.5 stainless steel exhaust tip
- Quiet, clean, and deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
- See more on Amazon...
Brand: Yonaka Motorsports | Manufacturer: Yonaka Motorsports
Dimensions: 15.00 x 51.00 x 12.00 inches | Weight: 29.00 pounds
See On Amazon
Looking For Something Else?
Search