5 pcs M42 Cobalt End Mills, Square Nose, Bright (Uncoated) Finish, 1/2" Mill Diameter, 2" Length of Cut, 4" Overall Length, 4 Flute, Center Cutting
Asin: B077ZMFXZM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
General Purpose End Mill That Creates Square Corners; Used For Both Roughing And Finishing Applications.
Features
- 1/2" Cut Diameter; 2" Length of Cut; 4" Overall Length; 1/2" Shank Diameter; 4 Flute; 35 Helix Angle
- General purpose end mill that creates square corners; Used for both roughing and finishing applications
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon Similar To 5 pcs M42 Cobalt End
#1
STROTON Cobalt Drill Bit Set (1/16-1/2 Inch, 17PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood
Asin: B09MRW8399 | Model: Cobalt 6 series bits inch 1/16-1/2 | PartNumber: Cobalt 6 series bits inch 1/16-1/2 | Ean: 0643459994935 | UPC: 643459994935
This Heavy Duty Work Cobalt Drill Bit Is Typically Capable Of Running Two To Three Times Faster.Despite The Higher Price,The Cost Per Hole When Using Cobalt Drill Bit Will Be The Lowest,Since It Can Produce So Many More Holes..
17Pcs 135 Degree Cobalt Industrial Hss Drill Bits Kit Includes :1/16 (2Pcs), 5/64, 3/32 (2Pcs), 7/64, 1/8 (2Pcs), 9/64, 5/32, 3/16, 7/32, 1/4 (2Pcs), 5/16, 3/8, 1/2 ..
The Sufficiently Sharp Bit Edge Can Cut The Metal Material Into Long Strips Of Iron Chips Rather Than Slowly Grinding Through The Material With A Blunt Drill Bit..
The Cutting Edge Has Been Ground Three Times And Is Made Of Cobalt Steel, Which Has High Hardness And Heat Resistance. It Is Designed For Drilling Through Stainless Steel, Hardened Steel, Iron, Aluminum, Pipes, Wood, Pvc, And Plastics..
Features
- Premium 5% Cobalt Steel ,68 HRC (Rockwell Hardness Scale) ,the Cobalt Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.
- The Cutting Edge has been Ground Three Times and is made of Cobalt Steel, which has High Hardness and Heat Resistance. It is Designed for Drilling through Stainless Steel, Hardened Steel, Iron, Aluminum, Pipes, Wood, PVC, and Plastics.
- This Heavy Duty Work Cobalt Drill Bit is Typically Capable of Running Two to Three Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
- The Sufficiently Sharp Bit Edge Can Cut the Metal Material into Long Strips of Iron Chips rather than Slowly Grinding Through the Material with a Blunt Drill Bit.
- 17Pcs 135 Degree Cobalt Industrial Hss Drill Bits Kit Includes :1/16 (2pcs), 5/64, 3/32 (2pcs), 7/64, 1/8 (2pcs), 9/64, 5/32, 3/16, 7/32, 1/4 (2pcs), 5/16, 3/8, 1/2 .
- See more on Amazon...
Brand: STROTON | Manufacturer: STROTON Ltd
See On Amazon #2
5 Pc - 5/16'' x 5/16'' x 2-1/2'' M42 Cobalt Steel Square Tool Bit Lathe Fly Cutter Mill Blank
Asin: B06VX3WGR9 | Ean: 0618794216448 | UPC: 618794216448
High Speed Steel Tool Bits Show Exceptional Results On Mild Steel, Alloys And Tools Steels.
Quantity: 5 Pc Per Order ; Shipping Weight: 11 Ounce.
Overall Length: 2-1/2'' Long.
Commonly Used On A Lathe, A Milling Machine Fly Cutter Or A Metal Shaper.
Features
- 5 Pc 5/16'' x 5/16'' x 2-1/2'' M42 HSS square tool bits
- Commonly used on a lathe, a milling machine fly cutter or a metal shaper
- High speed steel tool bits show exceptional results on mild steel, alloys and tools steels
- Overall length: 2-1/2'' long
- Quantity: 5 Pc per order ; Shipping weight: 11 ounce
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
Weight: 1.00 pounds
See On Amazon #3
5 pcs M42 Cobalt End Mills, Square Nose, Double End, Bright (Uncoated) Finish, 13/32" Mill Diameter, 1" Length of Cut, 4 1/8" Overall Length, 4 Flute, Center Cutting
Asin: B0BNJNVC1Z
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
General Purpose End Mill That Creates Square Corners; Used For Both Roughing And Finishing Applications; Two Milling Ends For Increased Tool Life.
Features
- 13/32" Cut Diameter; 1" Length of Cut; 4 1/8" Overall Length; 1/2" Shank Diameter; 4 Flute; 35 Helix Angle
- General purpose end mill that creates square corners; Used for both roughing and finishing applications; Two milling ends for increased tool life
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #4
5 pcs M42 Cobalt End Mills, Square Nose, Bright (Uncoated) Finish, 1/2" Mill Diameter, 1 1/4" Length of Cut, 3 1/4" Overall Length, 4 Flute, Center Cutting
Asin: B0B5Y35JVQ
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
General Purpose End Mill That Creates Square Corners; Used For Both Roughing And Finishing Applications.
Features
- 1/2" Cut Diameter; 1 1/4" Length of Cut; 3 1/4" Overall Length; 1/2" Shank Diameter; 4 Flute; 35 Helix Angle
- General purpose end mill that creates square corners; Used for both roughing and finishing applications
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #5
5 pcs M42 Cobalt End Mills, Square Nose, TiAlN Coated, 3/8" Mill Diameter, 3/4" Length of Cut, 2 1/2" Overall Length, 4 Flute, Center Cutting
Asin: B0BNJHCKWY
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Robust Tialn Coated Finish Enhances Resistances To Heat And Oxidation; Up To 10X Longer Service Life.
General Purpose End Mill That Creates Square Corners; Used For Both Roughing And Finishing Applications.
Features
- 3/8" Cut Diameter; 3/4" Length of Cut; 2 1/2" Overall Length; 3/8" Shank Diameter; 4 Flute; 35 Helix Angle
- General purpose end mill that creates square corners; Used for both roughing and finishing applications
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Robust TiAlN Coated finish enhances resistances to heat and oxidation; Up to 10x longer service life
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #6
5 pcs M42 Cobalt Roughing End Mills, Square Nose, Fine Pitch, AlCrN Coated, 1/2" Mill Diameter, 1 1/4" Length of Cut, 3 1/4" Overall Length, 4 Flute, Center Cutting
Asin: B01KWL93WM
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Robust Alcrn Coated Finish Enhances Resistances To Heat And Oxidation; Up To 10X Longer Service Life.
High-Performance End Mill Capable Of High Material Removal Rates; Fine Pitch Creates Smaller Chips Making It Ideal For Use On Harder Metals Such As Steel And Titanium.
Features
- 1/2" Cut Diameter; 1 1/4" Length of Cut; 3 1/4" Overall Length; 1/2" Shank Diameter; 4 Flute; 35 Helix Angle; Fine Pitch
- High-performance end mill capable of high material removal rates; Fine pitch creates smaller chips making it ideal for use on harder metals such as steel and titanium
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Robust AlCrN Coated finish enhances resistances to heat and oxidation; Up to 10x longer service life
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #7
5 pcs M42 Cobalt End Mills, Ball Nose, Bright (Uncoated) Finish, 7/16" Mill Diameter, 1" Length of Cut, 4 1/8" Overall Length, 4 Flute, Center Cutting
Asin: B0BNJMQBZK
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
General Purpose End Mill That Creates Rounded Corners; Used For Both Roughing And Finishing Applications.
Features
- 7/16" Cut Diameter; 1" Length of Cut; 4 1/8" Overall Length; 1/2" Shank Diameter; 4 Flute; 35 Helix Angle
- General purpose end mill that creates rounded corners; Used for both roughing and finishing applications
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #8
5 pcs M42 Cobalt Roughing End Mills, Square Nose, Coarse Pitch, Bright (Uncoated) Finish, 3/8" Mill Diameter, 3/4" Length of Cut, 2 1/2" Overall Length, 3 Flute, Center Cutting
Asin: B0BNJJLRRV
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
High-Performance End Mill Capable Of High Material Removal Rates; Coarse Pitch Creates Larger Chips Making It Ideal For Use On Softer Materials Such As Aluminum And Brass.
Features
- 3/8" Cut Diameter; 3/4" Length of Cut; 2 1/2" Overall Length; 3/8" Shank Diameter; 3 Flute; 35 Helix Angle; Coarse Pitch
- High-performance end mill capable of high material removal rates; Coarse pitch creates larger chips making it ideal for use on softer materials such as aluminum and brass
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #9
1 pcs M42 Cobalt Roughing End Mills, Square Nose, Coarse Pitch, Bright (Uncoated) Finish, 1" Mill Diameter, 6" Length of Cut, 8" Overall Length, 5 Flute, Center Cutting
Asin: B0B5VTNYGM
M42 Cobalt; 8% Cobalt Molybdenum Series High-Speed Steel Alloy Provides Superior Hardness And Wear Resistance.
Individually Packaged In Solid Plastic Tubes; 1 Pieces Per Order.
Bright Finish Prevents The Edge Buildup That Commonly Occurs When Machining Nonferrous "Gummy" Materials Such As Aluminum.
High-Performance End Mill Capable Of High Material Removal Rates; Coarse Pitch Creates Larger Chips Making It Ideal For Use On Softer Materials Such As Aluminum And Brass.
Features
- 1" Cut Diameter; 6" Length of Cut; 8" Overall Length; 1" Shank Diameter; 5 Flute; 35 Helix Angle; Coarse Pitch
- High-performance end mill capable of high material removal rates; Coarse pitch creates larger chips making it ideal for use on softer materials such as aluminum and brass
- M42 Cobalt; 8% cobalt molybdenum series high-speed steel alloy provides superior hardness and wear resistance
- Bright finish prevents the edge buildup that commonly occurs when machining nonferrous gummy materials such as aluminum
- Individually packaged in solid plastic tubes; 1 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #10
5 Pc M42 3/16'' x 3/16'' x 2-1/2'' Cobalt Steel Square Tool Bit Lathe Fly Cutter Mill Blank
Asin: B06X1CXDC6 | Ean: 0618794216486 | UPC: 618794216486
Commonly Used On A Lathe, A Milling Machine Fly Cutter Or A Metal Shaper.
Quantity: 5 Pc Per Order ; Shipping Weight: 5 Ounce.
High Speed Steel Tool Bits Show Exceptional Results On Mild Steel, Alloys And Tools Steels.
M42 Cobalt Steel ; Overall Length: 2-1/2'' Long.
Features
- 5 Pc 3/16'' x 3/16'' x 2-1/2'' M42 square tool bits
- M42 cobalt steel ; Overall length: 2-1/2'' long
- Commonly used on a lathe, a milling machine fly cutter or a metal shaper
- High speed steel tool bits show exceptional results on mild steel, alloys and tools steels
- Quantity: 5 Pc per order ; Shipping weight: 5 ounce
- See more on Amazon...
Brand: Prolinemax | Manufacturer: Generic
Weight: 1.00 pounds
See On Amazon #11
Shars M42 Cobalt Corner Rounding End Mill Set 8 PCS 1/16"-3/8" 404-5840 M(
Asin: B09JX19ZSY | Ean: 0000440458409 | UPC: 000440458409
Single End; Flute Length Type: Standard.
Size Range End Mill: 1/16", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8".
End Shape: Corner Rounding.
Material: Cobalt M42; Finish Coating: Uncoated.
Features
- Number of Pieces: 8; Number of Flutes: 4
- Material: cobalt M42; Finish Coating: uncoated
- Single End; Flute Length Type: Standard
- End Shape: Corner Rounding
- Size Range End Mill: 1/16, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 1.00 pounds
See On Amazon #12
5 Pc M42 1/4'' x 1/4'' x 2-1/2'' Cobalt Steel Square Tool Bit Lathe Fly Cutter Mill Blank
Asin: B06WP88WBP | Ean: 0618794216479 | UPC: 618794216479
Commonly Used On A Lathe, A Milling Machine Fly Cutter Or A Metal Shaper.
Quantity: 5 Pc Per Order ; Shipping Weight: 5 Ounce.
High Speed Steel Tool Bits Show Exceptional Results On Mild Steel, Alloys And Tools Steels.
M42 Cobalt Steel ; Overall Length: 2-1/2'' Long.
Features
- 5 Pc 1/4'' x 1/4'' x 2-1/2'' M42 square tool bits
- M42 cobalt steel ; Overall length: 2-1/2'' long
- Commonly used on a lathe, a milling machine fly cutter or a metal shaper
- High speed steel tool bits show exceptional results on mild steel, alloys and tools steels
- Quantity: 5 pc per order ; Shipping weight: 5 ounce
- See more on Amazon...
Brand: Prolinemax | Manufacturer: Generic
Weight: 1.00 pounds
See On Amazon #13
M42 Cobalt Drill 4.1-5.9MM 1Pcs(Size:4.1mm 10pcs)
Asin: B0D4QLKPZP | Model: GNKFDBST | PartNumber: GNKFDBST | Ean: 9408673420209
Brand: GNKFDBST | Manufacturer: GNKFDBST
Weight: 0.11 pounds
See On Amazon #14
M42 Cobalt Drill 4.1-5.9MM 1Pcs(Size:4.1mm 10pcs)
Asin: B0D4QGFYF7 | Model: HTNAFONI | PartNumber: HTNAFONI | Ean: 9408673437313
Brand: HTNAFONI | Manufacturer: HTNAFONI
Weight: 0.11 pounds
See On Amazon #15
M42 Cobalt Drill 4.1-5.9MM 1Pcs(Size:4.1mm 10pcs)
Asin: B0D4QBYYD8 | Model: BDPQKPDV | PartNumber: BDPQKPDV | Ean: 9408673425778
Brand: BDPQKPDV | Manufacturer: BDPQKPDV
Weight: 0.11 pounds
See On Amazon #16
M42 Cobalt Drill 4.1-5.9MM 1Pcs(Size:4.2mm 10pcs)
Asin: B0D4QB51FS | Model: DMBGRXJF | PartNumber: DMBGRXJF | Ean: 9408673447343
Brand: DMBGRXJF | Manufacturer: DMBGRXJF
Weight: 0.11 pounds
See On Amazon #17
5 pcs Solid Carbide End Mills, Ball Nose, TiAlN Coated, 1/2" Mill Diameter, 1" Length of Cut, 3" Overall Length, 2 Flute, Center Cutting
Asin: B01KWMONRG
Harder And Higher Heat-Resistance Allows These Micrograin Carbide End Mills To Last Much Longer Than High-Speed Steel And Cobalt Steel End Mills; Can Be Run At Significantly Higher Speeds To Decrease Manufacturing Times.
Individually Packaged In Solid Plastic Tubes; 5 Pieces Per Order.
Robust Tialn Coated Finish Enhances Resistances To Heat And Oxidation; Up To 10X Longer Service Life.
General Purpose End Mill That Creates Rounded Corners; Used For Both Roughing And Finishing Applications.
Features
- 1/2" Cut Diameter; 1" Length of Cut; 3" Overall Length; 1/2" Shank Diameter; 2 Flute; 35 Helix Angle
- General purpose end mill that creates rounded corners; Used for both roughing and finishing applications
- Harder and higher heat-resistance allows these micrograin carbide end mills to last much longer than high-speed steel and cobalt steel end mills; Can be run at significantly higher speeds to decrease manufacturing times
- Robust TiAlN Coated finish enhances resistances to heat and oxidation; Up to 10x longer service life
- Individually packaged in solid plastic tubes; 5 pieces per order
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #18
Accusize Industrial Tools 5 Pcs 9/16'' by 1/2'' by 1-3/8'', 3-3/8'' Oal 4 Flute, M42-8% Finishing, Center Cutting Cobalt End Mill, Co-916x5
Asin: B01GF1K8JA | Model: CO-916x5 | PartNumber: CO-916x5 | Ean: 0663566009278 | UPC: 663566009278
Center Cutting Capability: Enables The Tool To Perform Plunge Cutting Operations, Adding Versatility In Milling Processes..
Suitable For Various Milling Types: Ideal For Peripheral, Ramp, Slot, Helical, And Plunge Milling, Increasing Its Utility In Diverse Machining Operations..
Dimensionally Specific: Featuring A 9/16" Diameter, 1/2" Shank Diameter, 1-3/8" Flute Length, And A Total Length Of 3-3/8", For Controlled And Precise Milling..
4-Flute, Single-End Design: Optimal For Efficient Material Removal And Precision In Cutting And Finishing Applications..
Features
- M42-8% Premium Cobalt Composition: Enhanced with superior weary-resistance, brittleness, red hardness, heat-resistance, and durability of the cutting edge.
- 4-Flute, Single-End Design: Optimal for efficient material removal and precision in cutting and finishing applications.
- Center Cutting Capability: Enables the tool to perform plunge cutting operations, adding versatility in milling processes.
- Dimensionally Specific: Featuring a 9/16 diameter, 1/2 shank diameter, 1-3/8 flute length, and a total length of 3-3/8, for controlled and precise milling.
- Suitable for Various Milling Types: Ideal for peripheral, ramp, slot, helical, and plunge milling, increasing its utility in diverse machining operations.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 1.57 x 4.72 x 4.72 inches | Weight: 2.20 pounds
See On Amazon #19
Accusize Industrial Tools 5 Pcs 5/8'' by 5/8'' by 1-5/8'', 3-3/4'' Oal 4 Flute, M42-8% Cobalt End Mill, Finishing, Center Cutting, Co-58x5
Asin: B01GDCYSE2 | Model: CO-58x5 | PartNumber: CO-58x5 | Ean: 0663566009247 | UPC: 663566009247
Higher Weary-Resistance; Higher Brittleness; Higher Red Hardness; Higher Heat-Resistance; Higher Durability Of Cutting Edge.
Dia.: 5/8"; Shank Dia.: 5/8"; Flute Length: 1-5/8"; Oaverall Length: 3-3/4"; Flute: 4.
Peripheral Milling; Ramp Milling; Slot Milling; Helical Milling; Plunge Milling.
High-Temperature Alloys; High-Strength Steel; Hard Die Steel.
Features
- Single-end; 4-flute; Center cutting
- high-temperature alloys; high-strength steel; hard die steel
- Higher weary-resistance; Higher brittleness; Higher red hardness; Higher heat-resistance; Higher durability of cutting edge
- Peripheral milling; Ramp milling; Slot milling; Helical milling; Plunge milling
- Dia.: 5/8; Shank Dia.: 5/8; Flute Length: 1-5/8; Oaverall Length: 3-3/4; Flute: 4
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 1.57 x 4.72 x 3.94 inches | Weight: 3.31 pounds
See On Amazon #20
Accusize Industrial Tools 10 Pcs 5/16'' by 3/8'' by 3/4'', 2-1/2'' Oal 4 Flute, M42-8% Cobalt Finishing, Center Cutting End Mill, Co-516x10
Asin: B01GDCHYVG | Model: CO-516x10 | PartNumber: CO-516x10 | Ean: 0663566009230 | UPC: 663566009230
M42-8% Premium Cobalt.
Flutes Ground By A World-Class Is-9002 Factory, Cnc Qualified.
Center Cutting.
Diameter: 5/16", Shank Diameter: 3/8", Flute Length: 3/4", Overall Length: 2-1/2".
Features
- 4 Flute
- Diameter: 5/16, Shank Diameter: 3/8, Flute length: 3/4, Overall Length: 2-1/2
- M42-8% Premium cobalt
- Center cutting
- Flutes ground by a world-class IS-9002 factory, CNC Qualified
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 1.57 x 4.72 x 4.72 inches | Weight: 2.20 pounds
See On Amazon
Looking For Something Else?
Search