RATTMMOTOR CNC Air Cooled Spindle Motor Kit, 2.2KW Spindle Motor 220V ER20 24000RPM+2.2KW VFD 220V Inverter Single to 3 Phase Variable Frequency Drive+80mm Spindle Motor Mount for CNC Router Machine
Asin: B0785QKYT6 | Ean: 0651312401100 | UPC: 651312401100
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 220V 0-50Hz/60Hz. Output：3 Phase 220V 0-400Hz. Communication Control: Rs-485. Vibration: Below 0.5G. Five-Digits Display And Status Indicator Lamp Display Frequency, Current, Revolution, Voltage, Counter, Temperature, Foward Or Reverse Running, Fault, Ect..
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【2.2Kw Spindle Motor】: ①This Is A 220V-2.2Kw Air-Cooled 8A Φ 80X195mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.005 Accuracy And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Motor Only Can Rotate Clockwise But Not Counterclockwise..
Features
- Package Include : 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws)
- 2.2KW Spindle Motor : This is a 220V-2.2KW air-cooled 8A 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 220V 0-50Hz/60Hz. Output 3 phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 3.15 x 0.01 inches | Weight: 9.10 pounds
See On Amazon Similar To RATTMMOTOR CNC Air Cooled Spindle
#1
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.03 Pounds
See On Amazon #2
RATTMMOTOR DC Brushless Spindle Motor Kit, 500W 48V Spindle Motor Air Cooled ER11, 12000RPM, 0.6N.m, 55MM+BLDC Driver Motor Speed Controller 600W Spindle Power Supply+Clamp Mount for CNC Router
Asin: B09X2Y63XQ | Model: 500WBLDC-4 | PartNumber: 500WBLDC-4
【Spindle Motor Drvier Parameters】Rated Voltage: 20-50Vdc; Rated Current: 10A; Limiting Current: 15A; Support Speed: Support Speed Above 20000Rpm, The Specific Speed Depends On The Motor Itself And The Load..
【Advantages-1】The Brush Is Removed, And There Is No Electric Spark Generated When The Brushed Motor Is Running, Which Greatly Reduces The Interference Of The Electric Spark To The Remote Control Radio Equipment..
【Dc Switching Power Supply Parameters】Input Voltage: 110V / 220V Ac; Current: 0-12.5A; Input Frequency: 50/60Hz; Power: 600W; Output Voltage: Dc 48V; Size; 215*115*50Mm..
【Spindle Motor Drvier Features】Compatible With Square Wave With And Without Hall, With Potentiometer Speed Regulation Function, External 10V Voltage Speed Regulation Function, Switch Function, Speed Output Function, Alarm Output Function, Forward And Reverse Function, Etc., And Has A Protective Shell..
Features
- Air Cooled Spindle Power: 500W; Voltage: 48VDC; Speed: 12000r/min; Torque 0.6NM; Diameter: 55mm.Radial runout off :about 0.01-0.03mm;Insulation resistance: > 2 megohms; Dielectric strength of insulation: 400V.
- Spindle Motor Drvier Features Compatible with square wave with and without Hall, with potentiometer speed regulation function, external 10V voltage speed regulation function, switch function, speed output function, alarm output function, forward and reverse function, etc., and has a protective shell.
- Spindle Motor Drvier Parameters Rated voltage: 20-50VDC; Rated current: 10A; Limiting current: 15A; Support speed: support speed above 20000RPM, the specific speed depends on the motor itself and the load.
- DC Switching Power Supply Parameters Input voltage: 110V / 220V AC; Current: 0-12.5A; Input frequency: 50/60Hz; Power: 600W; output Voltage: DC 48V; Size; 215*115*50mm.
- Advantages-1 The brush is removed, and there is no electric spark generated when the brushed motor is running, which greatly reduces the interference of the electric spark to the remote control radio equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 22.83 x 74.80 x 22.44 inches | Weight: 5.95 pounds
See On Amazon #3
80W 110V Water Pump Flow 3500L/H Hmax 3.5m Dry Run Protetion Mutifuctional Submersible Pump for CNC Spindle Motor, Miniature Foutains, Air-conditioning Fan, Miniascape Foutain, Aquarium Fish Tank
Asin: B074DTKRSN | Model: DS-3200 | PartNumber: DS-3200 | Ean: 0785004503299 | UPC: 785004503299
This Submersible Pump Is Designed For Reliability And Ultra-Quiet Operation To Provide Years Of Service.
Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3.0Kw And Other High Speed Spindle Motor.
Flow Rate: 3500L/H, Overall Dimension:153X88x108mm.
Strong Power And High Lift. Max Lift Height: 3.5Meter. 80W High Efficiency Motor For Energy Saving. Lift Height Is A Max Height The Water Goes Up, After Connecting The Water Pipe To The Nozzle (Make Sure The Joint Sealed Securely And Tightly).
Features
- This submersible water pump is great for aquarium, fountains, spout and hydroponic systems. Adjustable water flow rate; Suction cup mounting feet for either vertical or horizontal mounting.Contains no seals or messy oils.
- strong power and high lift. Max Lift Height: 3.5Meter. 80W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
- This submersible pump is designed for reliability and ultra-quiet operation to provide years of service
- Flow Rate: 3500L/H, Overall Dimension:153x88x108mm
- Suitable for 0.8KW, 1.5KW, 2.2KW, 3.0KW and other high speed spindle motor
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RATTMMOTOR
Dimensions: 5.51 x 5.91 x 3.15 inches | Weight: 1.24 pounds
See On Amazon #4
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Asin: B01LNBOCDA | Model: 500W | PartNumber: 500W | Ean: 0713839365553 | UPC: 713839365553
🛠️【Speed Power Switch】- Input Voltage: Ac110v/220V, 50/60Hz. Output Current Peak: 6A. Output Voltage: Dc0-100V. Please Install In The Place That Is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle..
🛠️【Er11 Collet Chuck】- 13Pcs Er11 Collet Set Gripping Range: 1Mm To 7Mm(1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm). Run-Out Tolerance 0.01Mm. For Cnc Milling Lathe Tool & Work Holding Engraving Machine..
🛠️【 52Mm Mount Bracket】- Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
🛠️【500W Cnc Spindle Motor】- Operating Voltage: 100Vdc, Power: 500W, Input: Ac110v, Speed: Up To Idle Up To 12,000 Rev / Min, Torque: 5000G/Cm. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03..
Features
- CNC Spindle kit 500W - 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
- 500W CNC Spindle motor - Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
- Speed Power Switch - Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
- 52mm Mount Bracket - Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- ER11 Collet Chuck - 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: Mysweety
Dimensions: 7.48 x 11.42 x 6.69 inches
See On Amazon #5
RATTMMOTOR 1.5KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive Spindle Motor Controller Converter 0-1000Hz + Extension Cable for CNC Router Milling Engraving Machine
Asin: B09WJV3PM7 | Model: RTM100-110V1.5 | PartNumber: RTM100-110V1.5
Input Phase: 1 Phase; Output Phase: 3 Phase..
Suitable For 0.8Kw Or 1.5Kw 110V Cnc Air-Cooled Water-Cooled Spindle Motor..
Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz..
Features
- Input Voltage: 110V(+/-15%); Output Voltage: 110VAC.
- Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz.
- Input Phase: 1 Phase; Output Phase: 3 Phase.
- Suitable for 0.8KW or 1.5KW 110V CNC air-cooled water-cooled spindle motor.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 5.91 x 0.00 x 4.65 Inches
See On Amazon #6
RATTMMOTOR CNC Spindle Motor 220V 3KW Water Cooled Spindle Motor 24000RPM 12A ER20 Spindle 4-Bearings 100mm Spindle Motor 400HZ 3-Phase for CNC Router Engraver Milling Machine
Asin: B09KKY1TGB | Model: GDZ100-3.0 | PartNumber: GDZ100-3.0
✅【Speed Of The Spindle Motor】0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
✅【About The Design Dvantages Of The Spindle Motor】The Design Of The Dust-Proof Cover On The Front Of The Spindle And The Use Of Stainless Steel Body Can Effectively Prevent Dust, Water And Rust..
✅【Advantages】4Pcs P4 High Speed Bearings, Dynamic Balance, High-Precison Nut And Chuck, It Can Better Ensure The Accuracy Of The Spindle. It's Not Easy To Oxidize And Rust With The Water-Cooling Design, And Pure Copper Galvanized Nozzle..
✅【Simple Introduction】This Is A 220V 3Kw Water-Cooled 12A Φ 100X220mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.01Mm Precision Tapered Bore And Runout Off Is Less Than 0.01Mm. It Is Mainly Suitable For Non-Metallic Engraving,Such As Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine..
Features
- How to Wire The Spindle Motor The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 does not require wiring.
- Simple Introduction This is a 220V 3KW water-cooled 12A 100x220mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.01mm precision tapered bore and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- Speed of The Spindle Motor 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- Advantages 4pcs P4 high speed bearings, dynamic balance, high-precison nut and chuck, it can better ensure the accuracy of the spindle. It's not easy to oxidize and rust with the water-cooling design, and pure copper galvanized nozzle.
- About The Design dvantages of The Spindle Motor The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changsheng
Dimensions: 0.00 x 0.01 x 39.37 inches | Weight: 18.74 pounds
Warranty: 1 year warranty
See On Amazon #7
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz 80mm ER20 for Engraving Machine
Asin: B077BYVT56 | Ean: 0724509858176 | UPC: 724509858176
【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.21 pounds
See On Amazon #8
RATTMMOTOR 2.2KW Water Cooled Spindle Kits 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter 3HP Variable Frequency Drive+Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
Asin: B0756WNP1J | Ean: 0785004503381 | UPC: 785004503381
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 110V 0-50Hz/60Hz. Output：3 Phase 110V 0-400Hz.Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 0.01 x 0.00 inches | Weight: 23.19 pounds
See On Amazon #9
RATTMMOTOR DC Motor CNC 997 Spindle Motor 400W 12-48VDC 0.99N.m 5000-20000RMP Double Ball Bearing, Diameter 52mm Spindle Motor for DIY Mini CNC Router Lathes Milling Engraver Polishing Machine
Asin: B0CB2R7VGG | Ean: 0754193411661 | UPC: 754193411661
【High Power, High Torque】High Power Spindle Motor With The Beginning Of 9, The Rated Power Is 400W, The Torque Is Up To 15Kg/Cm, The Torque Is 0.99N.M, The Torque Is Strong, Far More Than 7 Motors, It Is The Special Motor For Diy Drilling, Milling, Cutting And Grinding..
【Double Ball Bearings, Strong Magnetism And Low Noise】Front And Rear Ball Bearings Are Highly Efficient And Quiet. With Its Own Cooling Fan, Can Efficiently Solve The Problem Of Heat Dissipation. 7-Stage Rotor, Pure Copper Coil, High Magnetic Force, High Efficiency, Long-Lasting And Durable..
【5000-2000Rpm】Rated Current 1.85A, Rated Voltage 12-48V Dc, Motor Speed Up To 20,000Rpm, 12V/5000Rpm, 24V/10,000Rpm, 36V/15,000Rpm, 48V/20,000Rpm, Supports Forward And Reverse, High Speed, Strong Momentum..
【Motor Size】Motor Length Is 120Mm/4.72Inch, Diameter Is 54Mm/2.13Inch, Shaft Diameter Is 6.35Mm/0.25Inch, Output Shaft Length Is 20Mm/0.79Inch, Motor Weight Is 760G/1.68 Ib..
Features
- Applicable Fields Cutting machines, belt sanders, lathes, milling machines, bench drills, hand drills, polishing machines, bead machines, lawn mowers, wire saws, band saws, electric grinders, engraving machines and other miniature machines.
- Motor size Motor length is 120mm/4.72inch, diameter is 54mm/2.13inch, shaft diameter is 6.35mm/0.25inch, output shaft length is 20mm/0.79inch, motor weight is 760g/1.68 Ib.
- High power, high torque High power spindle motor with the beginning of 9, the rated power is 400W, the torque is up to 15KG/CM, the torque is 0.99N.m, the torque is strong, far more than 7 motors, it is the special motor for DIY drilling, milling, cutting and grinding.
- 5000-2000RPM Rated current 1.85A, rated voltage 12-48V DC, motor speed up to 20,000rpm, 12V/5000rpm, 24V/10,000rpm, 36V/15,000rpm, 48V/20,000rpm, supports forward and reverse, high speed, strong momentum.
- Double ball bearings, strong magnetism and low noise Front and rear ball bearings are highly efficient and quiet. With its own cooling fan, can efficiently solve the problem of heat dissipation. 7-stage rotor, pure copper coil, high magnetic force, high efficiency, long-lasting and durable.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 4.72 x 2.05 x 2.05 inches
See On Amazon #10
RATTMMOTOR 65mm Spindle Motor Clamp Mount Bracket Diameter 65mm CNC Motor Spindle with 3PCS Screws for 0.8kw 800W or 1.5kw CNC Router Engraving Milling Spindle
Asin: B078HDZ9Q3 | Model: 65CP | PartNumber: 65CP | Ean: 0654615632714 | UPC: 654615632714
Material: Aluminum,Surface Sandblasted. Weigth Is 1.01Kgs.
Cast Aluminium Fixture Is Much Heavier Than Aluminium Profile Fixture.
Fit For : Cnc 65Mm Diameter High-Speed Spindle Motor.
0.8Kw 800W 1.5Kw Spindle Motor Mount Bracket Clamp.
Features
- Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform
- 0.8kw 800W 1.5kw Spindle motor mount bracket clamp
- Material: Aluminum,Surface sandblasted. weigth is 1.01kgs
- Fit for : CNC 65mm Diameter High-speed Spindle Motor
- Cast aluminium fixture is much heavier than aluminium profile fixture
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM-65CP
Dimensions: 25.59 x 50.79 x 30.71 inches | Weight: 2.20 pounds
See On Amazon #11
RATTMMOTOR DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC Router 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro Engraving Router Milling Machine
Asin: B08FD2PJHK | Model: CNC-775 | PartNumber: CNC-775 | Ean: 0619191686209 | UPC: 619191686209
Large Torque, Low Friction And Stable Operation..
Package Include: 1 ×775 Spindle Motor Er11+ 2×Wrench + 1×Cables.
Mainly For Diy Mini Cnc Wood Router Machine, Such As Cnc 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418.
Double Ball Bearings Have Low Noise..
Features
- Front and rear double ball bearings, universal DC 12V-24V voltage.
- Double ball bearings have low noise.
- Large torque, low friction and stable operation.
- Mainly for DIY MINI CNC wood router machine, such as CNC 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418
- Package include: 1 775 Spindle motor ER11+ 2 wrench + 1 cables
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.75 x 0.00 x 0.00 inches | Weight: 0.99 Pounds
See On Amazon #12
RATTMMOTOR CNC 500W Spindle Motor ER11 500 Watt Air Cooled Spindle Motor 52mm DC 48V 12000RPM 600mN.m for DIY Mini CNC Router Engraver Milling Machine
Asin: B08H1RRCF6 | Model: 500W | PartNumber: 500W | Ean: 0619191721177 | UPC: 619191721177
Speed: Idling Speed Can Reach 12000Rmp.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Spindle Radial Runout 0.01-0.03Mm High Accuracy； Torque: 600Mn.M.
Diameter: 52Mm; Total Length Of Motor:200Mm.
Features
- Power: 500W; Operating Voltage: 48VDC
- Diameter: 52mm; Total length of motor:200mm
- Speed: Idling speed can reach 12000RMP
- Spindle radial runout 0.01-0.03mm high accuracy Torque: 600mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 7.83 x 2.05 inches | Weight: 2.09 pounds
See On Amazon #13
Daedalus CNC Spindle Motor Kit, 500w, ER11, Brushed
Asin: B07VLF63LX | Model: Brushed-500-ER11 | PartNumber: Brushed-500-ER11 | Ean: 8002128849082
★Come With Psu, Rheostat, Spindle Clamp, Cable, Wrench, Butt Terminals And Heat Shrink Tube..
★Cost-Effective, Carbon Brushes Need To Be Replaced Regularly..
★Quiet And Efficient, Smooth Running, Spin Up Fast And Have Minimal Vibration..
★Enough Power For Wood Engraving, Mdf, Plastics, Acrilic, Plexiglass, Foam Board..
Features
- Spindle, 2 Wires-Brushed, 500w, ER11, working voltage 0-100v DC, 0-12000RPM, 2.05"
- Enough Power for wood engraving, MDF, plastics, acrilic, plexiglass, foam board.
- Come with PSU, Rheostat, Spindle Clamp, Cable, Wrench, Butt Terminals and Heat shrink tube.
- Quiet and Efficient, Smooth running, Spin up fast and have minimal vibration.
- Cost-effective, Carbon brushes need to be replaced regularly.
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
Dimensions: 4.57 x 14.57 x 11.93 inches | Weight: 4.93 Pounds
See On Amazon #14
Daedalus CNC Brushless Spindle Motor Kit, 500w, ER11, 48V DC, 12000RPM
Asin: B083VRT6Y3 | Model: BLDC-500-ER11 | PartNumber: BLDC-500-ER11 | Ean: 0717066357046 | UPC: 717066357046
★Speed Readout: Come With The Lcd Display, Real-Time Read Spindle Speed.
★Cost-Effective: Without Brush, Maintenance-Free, Removal Dust When Necessary.
★Quiet And Efficient: Smooth Running, Spin Up Fast And Have Minimal Vibration..
★Mach3 Control: Support Mach3 Control Motor After Driver Upgrade, Reference Manual For Wiring.
Features
- Spindle: 3 Wires-Brush-less, 500w, ER11, 48v DC, 0-12000RPM, 2-3/16"
- Mach3 control: Support Mach3 control motor after driver upgrade, Reference manual for wiring
- Speed Readout: Come with the LCD display, Real-time read spindle speed
- Quiet and Efficient: Smooth running, Spin up fast and have minimal vibration.
- Cost-effective: Without Brush, maintenance-free, removal dust when necessary
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
Dimensions: 2.17 x 7.36 x 2.17 inches | Weight: 6.30 pounds
See On Amazon #15
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
Asin: B07ZHFV4N5 | Ean: 0769135311916 | UPC: 769135311916
Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
Speed Controller-- Armature Output Voltage: Dc0 ~ 100V Adjustable; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz(User Can Change The Power Supply To 110V According To Their Needs); Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast)..
Features
- Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque 0.5NM; Diameter: 52mm.
- Speed Controller-- Armature output voltage: DC0 ~ 100V adjustable; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz(User can change the power supply to 110V according to their needs); Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
- Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 2.20 x 7.83 inches | Weight: 3.68 Pounds
See On Amazon #16
800W Spindle Motor Kit, RATTMMOTOR 0.8KW 110V CNC Air Cooled Spindle Motor 52mm ER16 20000RPM+Mach3 Speed Controller Governor with Power Supply AC110V-220V+Spindle Mount Clamp for CNC Router Machine
Asin: B0CPHSKTNF | Model: 800W-ER16 | PartNumber: 800W-ER16 | Ean: 0754193192898 | UPC: 754193192898
【Speed Controller】 Power :800W; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast); Support Mach3 Fuction..
【Features】With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
【Note】This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
【Advantages】This Power Regulator Can Adjust 110 Or 220V According To Customers' Needs. Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000R/Min; Torque：0.79Nm; Diameter: 52Mm..
Features
- Supports Reverse Rotation As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
- Air Cooled Spindle Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque 0.79NM; Diameter: 52mm.
- Speed Controller Power :800W; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
- Advantages This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- Features With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 8.01 x 2.05 x 2.05 inches | Weight: 3.79 pounds
See On Amazon #17
RATTMMOTOR CNC Spindle Motor Kit 110V 2.2KW Water Cooled 80mm Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive+Mount Clamp+Water Pump+ER20 Collet
Asin: B09VXRGGDW
【2.2Kw Vfd】①Parameters: Input Voltage: 110V(+/-15%), Output Voltage: 110Vac, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 Phase, Output Phase: 3 Phase. It Provide A Variety Of Fault Protection Functions: Over-Current, Over-Voltage, Under-Voltage, Over-Heat, Overload, Lack Of Equal Real-Time Monitoring And Protection To Ensure Safe Operation..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected With Inverter's Port U, V, W Respectively. Number 4 Is The Ground Wire, No Wiring Is Required..
②Other Fuctions: With Over Torque And Under Torque Detection; With Jump Frequency Control Function, It Can Effectively Suppress Mechanical Resonance And Make The System More Stable And Reliable.It Can Also Avoid The Impact Of Production Due To Instantaneous Power Failure Because Of Instantaneous Power-Down Retention Function. What's More, It Supports Multiple Frequency Settings: Digital Setting, Analog Setting, Pid Setting, Rs485 Communication Setting,Ect..
【2.2Kw Spindle Motor】: ①This Is A 110V-2.2Kw Water-Cooled 15A Φ 80X213mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.003--0.005 Accuracy And Runout Off Is Less Than 0.02Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
Features
- Package Include : 1 x 2.2KW Water Cooled Spindle Motor 1 x 2.2KW VFD 1 x 80mm Spindle Motor Mount(with 3pcs screws) 1 x 80W Water Pump 1 x 5m Pipe 1 x ER20 Wrench 14 x ER20 Collet 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.02mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters: Input Voltage: 110V(+/-15%), Output Voltage: 110VAC, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase. It provide a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal real-time monitoring and protection to ensure safe operation.
- Other Fuctions: With over torque and under torque detection; With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and reliable.It can also avoid the impact of production due to instantaneous power failure because of instantaneous power-down retention function. What's more, it supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 8.39 x 0.00 inches | Weight: 21.61 Pounds
See On Amazon #18
RATTMMOTOR CNC Spindle Motor Speed Controller 6A Spindle Motor Speed Power Converter Compatible with 500W DC Air Cooled Spindle Motor
Asin: B09PR8HC7G | Model: RTM5.1 | PartNumber: RTM5.1
Current Limit: 6A.
Adapted Spindle Motor: 500W.
Features
- Input voltage: AC110-AC220V 10%, 50/60Hz
- Adapted spindle motor: 500W
- Current limit: 6A
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #19
CNC Spindle Motor Kits, 110V 1.5KW Air Cooled Spindle CNC Spindle +110V 1.5KW VFD+ 65mm Clamp Mount +Collet Set ER11+ Drill bits+ Wires+ Wrenches for CNC Router Machine
Asin: B0BF5R3LNC | Model: ytx-1.5kw air kit | PartNumber: ytx-1.5kw air kit
【Spindle Advantage 】- Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem..
【Wide Application】-Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Easy And Fast To Assemble 】-The Vfd Had Been Pre-Programmed For Basic Parameters , You Don't Need To Make Extra Setting Up.We Offer Fully Complete Accessories Including Pre-Soldered Aviation Wire And Power Wire, It Will Take Just 5 Minutes To Install All And Make All Functions Running..
Features
- PACKAGE LIST -1x110V 1.5KW 65mm air Cooled Spindle Motor +1x110V 1.5KW VFD+ 1x 65mm CNC Clamp Mount +13x ER11 Collets(1mm-7mm) +10x CNC Router Bits+ 1x aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+1xpower wire+2x wrenches
- EASY AND FAST TO ASSEMBLE -The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
- SPINDLE ADVANTAGE - Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- WIDE APPLICATION -Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #20
RATTMMOTOR 800W Water Cooled Spindle Kit, 65mm Spindle Motor 0.8KW 110V 400HZ+1.5KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive+65mm Spindle Mount+ER11 Collet+80W Water Pump for CNC
Asin: B09YC1ZZXK | Model: CS800W110Vk | PartNumber: CS800W110Vk
【Vfd Inverter Parameters】The 1.5Kw Variable Frequency Drive Inverter Has Five-Digits Display And Status Indicator Lamp Display Frequency, Current, Revolution, Voltage, Counter, Temperature, Foward Or Reverse Running, Fault, Ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 Phase, Output Phase: 3 Phase..
【80W 110V Water Pump】Power: 80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50Hz. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【How To Connect Spindle Motor And Vfd Inverter】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【0.8Kw Spindle Motor】: ①This Is A 110V-0.8Kw Water-Cooled 4A Φ 65X158mm Spindle Motor Come With A Er11 Nut And Collet, And Equipped With A 65Mm Spindle Mount. Frequency Is 400Hz, 0.003--0.005 Accuracy And Runout Off Is Less Than 0.01Mm. ②Speed Of The Spindle Motor : 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Main Shaft Cannot Only Rotate Clockwise Or Counter Clockwise..
Features
- Package Include : 1 x 0.8KW Water Cooled Spindle Motor ER11 1 x 1.5KW VFD 110V 1 x 65mm Spindle Motor Mount 1 x 80W Water Pump 1 x 5m Pipe 14 x ER11 Collet 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm
- 0.8KW Spindle Motor : This is a 110V-0.8KW water-cooled 4A 65x158mm spindle motor come with a ER11 nut and collet, and equipped with a 65mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter clockwise.
- VFD Inverter Parameters The 1.5KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase.
- How to Connect Spindle Motor and VFD Inverter The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- 80W 110V Water Pump Power: 80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50HZ. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.56 x 6.22 x 0.00 inches | Weight: 14.22 pounds
See On Amazon
Looking For Something Else?
Search