RATTMMOTOR 80mm CNC Spindle Motor Clamp Mount Bracket Support Cast Aluminium with 3pcs Screws for 80mm 1.5KW 2.2KW CNC Router Engraver Milling Water Cooled Air Cooled Spindle Motor
Asin: B078HB21VG | Model: 80CP | PartNumber: 80CP | Ean: 0654615632707 | UPC: 654615632707
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material: Aluminum,Surface Sandblasted..
Cast Aluminium Fixture Is Much Heavier Than Aluminium Profile Fixture..
Fit For : Cnc 80Mm Diameter High-Speed Spindle Motor..
1.5Kw 2.2Kw Spindle Motor Mount Bracket Clamp..
Features
- Compared with the aluminium profile fixture,the accuracy is much higher, and it is hard to deform.
- 1.5kw 2.2kw Spindle motor mount bracket clamp.
- Material: Aluminum,Surface sandblasted.
- Fit for : CNC 80mm diameter high-speed spindle motor.
- Cast aluminium fixture is much heavier than aluminium profile fixture.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM-80CP
Dimensions: 31.50 x 58.27 x 30.71 inches
See On Amazon Similar To RATTMMOTOR 80mm CNC Spindle Motor
#1
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.03 Pounds
See On Amazon #2
RATTMMOTOR DC Brushless Spindle Motor Kit, 500W 48V Spindle Motor Air Cooled ER11, 12000RPM, 0.6N.m, 55MM+BLDC Driver Motor Speed Controller 600W Spindle Power Supply+Clamp Mount for CNC Router
Asin: B09X2Y63XQ | Model: 500WBLDC-4 | PartNumber: 500WBLDC-4
【Spindle Motor Drvier Parameters】Rated Voltage: 20-50Vdc; Rated Current: 10A; Limiting Current: 15A; Support Speed: Support Speed Above 20000Rpm, The Specific Speed Depends On The Motor Itself And The Load..
【Advantages-1】The Brush Is Removed, And There Is No Electric Spark Generated When The Brushed Motor Is Running, Which Greatly Reduces The Interference Of The Electric Spark To The Remote Control Radio Equipment..
【Dc Switching Power Supply Parameters】Input Voltage: 110V / 220V Ac; Current: 0-12.5A; Input Frequency: 50/60Hz; Power: 600W; Output Voltage: Dc 48V; Size; 215*115*50Mm..
【Spindle Motor Drvier Features】Compatible With Square Wave With And Without Hall, With Potentiometer Speed Regulation Function, External 10V Voltage Speed Regulation Function, Switch Function, Speed Output Function, Alarm Output Function, Forward And Reverse Function, Etc., And Has A Protective Shell..
Features
- Air Cooled Spindle Power: 500W; Voltage: 48VDC; Speed: 12000r/min; Torque 0.6NM; Diameter: 55mm.Radial runout off :about 0.01-0.03mm;Insulation resistance: > 2 megohms; Dielectric strength of insulation: 400V.
- Spindle Motor Drvier Features Compatible with square wave with and without Hall, with potentiometer speed regulation function, external 10V voltage speed regulation function, switch function, speed output function, alarm output function, forward and reverse function, etc., and has a protective shell.
- Spindle Motor Drvier Parameters Rated voltage: 20-50VDC; Rated current: 10A; Limiting current: 15A; Support speed: support speed above 20000RPM, the specific speed depends on the motor itself and the load.
- DC Switching Power Supply Parameters Input voltage: 110V / 220V AC; Current: 0-12.5A; Input frequency: 50/60Hz; Power: 600W; output Voltage: DC 48V; Size; 215*115*50mm.
- Advantages-1 The brush is removed, and there is no electric spark generated when the brushed motor is running, which greatly reduces the interference of the electric spark to the remote control radio equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 22.83 x 74.80 x 22.44 Inches | Weight: 5.95 pounds
See On Amazon #3
RATTMMOTOR DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC Router 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro Engraving Router Milling Machine
Asin: B08FD2PJHK | Model: CNC-775 | PartNumber: CNC-775 | Ean: 0619191686209 | UPC: 619191686209
Large Torque, Low Friction And Stable Operation..
Package Include: 1 ×775 Spindle Motor Er11+ 2×Wrench + 1×Cables.
Mainly For Diy Mini Cnc Wood Router Machine, Such As Cnc 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418.
Double Ball Bearings Have Low Noise..
Features
- Front and rear double ball bearings, universal DC 12V-24V voltage.
- Double ball bearings have low noise.
- Large torque, low friction and stable operation.
- Mainly for DIY MINI CNC wood router machine, such as CNC 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418
- Package include: 1 775 Spindle motor ER11+ 2 wrench + 1 cables
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.75 x 0.00 x 0.00 Inches | Weight: 0.99 pounds
See On Amazon #4
HY HUANYANG Water Cooled CNC Spindle Motor 220V 2.2KW 24000RPM 400hz 80mm ER20 for Engraving Machine
Asin: B077BYVT56 | Ean: 0724509858176 | UPC: 724509858176
【Low Noise】The Dynamic Balance Technology Can Effectively Reduce The Noise During Use. The Scientifically Designed Water Circulation System Has A Better Heat Dissipation Effect To Ensure Smooth Operation..
【Warranty Assurance】Half A Year Warranty,You Can Contact Us If You Have Any Problems, We Will Carry Out After-Sales Service For You.
【Characteristic Advantage】Shell Is Cooled By Liquid Cycle To Reduce The Heat Rise Caused By High-Speed Rotation.Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process,Adopt Precision Steel Ball Holder To Ensure The Rotation Precision Of The Spindle In High Speed Grinding,.
【High Precision Collet】Er20 Standard Collet, The Collet Of The Cnc Spindle Is Quenched With Manganese Steel, And The Runout Is Less Than 0.005 Mm, Which Has High Precision And Is Not Easy To Break The Knife, Increasing The Stability Of The Working Process. Dynamic Balance Technology Can Effectively Reduce Noise During Use..
Features
- Powerful Bearings Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
- High Precision Collet ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
- Low Noise The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.
- Characteristic Advantage Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process,Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding,
- WARRANTY ASSURANCE Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you
- See more on Amazon...
Brand: HY HUANYANG | Manufacturer: Huanyang Electrical
Weight: 12.21 Pounds
See On Amazon #5
800W Spindle Motor Kit, RATTMMOTOR 0.8KW 110V CNC Air Cooled Spindle Motor 52mm ER16 20000RPM+Mach3 Speed Controller Governor with Power Supply AC110V-220V+Spindle Mount Clamp for CNC Router Machine
Asin: B0CPHSKTNF | Model: 800W-ER16 | PartNumber: 800W-ER16 | Ean: 0754193192898 | UPC: 754193192898
【Speed Controller】 Power :800W; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast); Support Mach3 Fuction..
【Features】With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
【Note】This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
【Advantages】This Power Regulator Can Adjust 110 Or 220V According To Customers' Needs. Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000R/Min; Torque：0.79Nm; Diameter: 52Mm..
Features
- Supports Reverse Rotation As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
- Air Cooled Spindle Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque 0.79NM; Diameter: 52mm.
- Speed Controller Power :800W; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
- Advantages This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- Features With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 8.01 x 2.05 x 2.05 inches | Weight: 3.79 pounds
See On Amazon #6
RATTMMOTOR 2.2KW Spindle Motor 110V, CNC Water Cooled Spindle Motor 80mm, 24000RPM High Speed Spindle Motor ER20 Collet 15A 400HZ for CNC Router Machine, CNC Engraver Milling Machine
Asin: B09MVJHLMD | Model: GDZ-2.2-110V | PartNumber: GDZ-2.2-110V
✅【Speed Of The Spindle Motor】0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lower Than 9000 Rpm During The Use Of The Spindle. It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counterclockwise..
✅【1 Year Warranty】We Offer 1 Year Warranty, If You Have Any Questions About The Product, Please Contact The Seller For A Satisfactory Solution..
✅【Advantages Of The Spindle】The Design Of The Dust-Proof Cover On The Front Of The Spindle And The Use Of Stainless Steel Body Can Effectively Prevent Dust, Water And Rust..
✅【High Quality】Iso9001 Quality Certifications Which Means This Item Is The Top Quality Item. In Extremely High Speed Working Environment, Ordinary Bearing Can Not Ensure This High Rotate Speed For Using For Long Time..
✅【Simple Introduction】This Is A 110V-2.2Kw Water-Cooled 15A Φ 80X213mm Spindle Motor Come With A Er20 Nut And Collet. Frequency Is 400Hz, 0.003--0.005 Accuracy And Runout Off Is Less Than 0.01Mm. It Is Mainly Suitable For Non-Metallic Engraving,Such As Wood Carving/Engraving Machine, Advertisement Engraving Machine,Cnc Machine..
Features
- How to Connect The Spindle Motor The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 is the ground wire, no wiring is required.
- Simple Introduction This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- Speed of The Spindle Motor 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- High Quality ISO9001 quality certifications which means this item is the top quality item. In extremely high speed working environment, ordinary bearing can not ensure this high rotate speed for using for long time.
- 1 Year Warranty We offer 1 year warranty, if you have any questions about the product, please contact the seller for a satisfactory solution.
- Advantages of The Spindle The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 0.00 x 0.01 x 0.00 inches | Weight: 10.80 Pounds
See On Amazon #7
Daedalus CNC Brushless Spindle Motor Kit, 500w, ER16, 48V DC, 12000RPM
Asin: B08N61JPXT | Model: BLDC-500-ER16 | PartNumber: BLDC-500-ER16 | Ean: 0717461967079 | UPC: 717461967079
★Speed Readout: Come With The Lcd Display, Real-Time Read Spindle Speed.
★Cost-Effective: Without Brush, Maintenance-Free, Removal Dust When Necessary.
★Quiet And Efficient: Smooth Running, Spin Up Fast And Have Minimal Vibration..
★Mach3 Control: Support Mach3 Control Motor After Driver Upgrade, Reference Manual For Wiring.
Features
- Spindle: 3 Wires-Brush-less, 500w, ER16, 48v DC, 0-12000RPM, 2-3/16"
- Mach3 control: Support Mach3 control motor after driver upgrade, Reference manual for wiring
- Speed Readout: Come with the LCD display, Real-time read spindle speed
- Quiet and Efficient: Smooth running, Spin up fast and have minimal vibration.
- Cost-effective: Without Brush, maintenance-free, removal dust when necessary
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
Dimensions: 2.17 x 7.52 x 2.17 inches | Weight: 2.49 Pounds
See On Amazon #8
RATTMMOTOR 2.2KW Spindle Motor 220V Square Air Cooled Spindle Motor ER20, 24000RPM High Speed Spindle Motor 4 Bearings 3-Phase 6A 400Hz for CNC Router Engraver Milling Cutting Machine
Asin: B0711XKJD1 | Ean: 0785004503053 | UPC: 785004503053
【How To Wring It To Inverter】The Spindle’S Terminal U1, V1, W1 Are Connected Separately To Inverter’S Terminal U, V,W. Connect Any 2Pin Terminal "R", "S" Or "T" Of The Inverter To "220Vac"..
【Main Application】Wood, Aluminum, Glass, Pvc Industry.The Spindle Motor Is Mainly Suitable For Non-Metallic Engraving..
【Note】Before Driving, Turn The Shaft By Hand First. The Temperature's Rise Caused By The High-Speed Rotation Of The Spindle Motor Can Be Eliminated By The Coolant Circulation System..
【Spindle Speed】The Speed Of The Spindle Motor Is 0-24000Rpm. Because It Is A High-Speed Spindle Motor, The Spindle Speed Must Not Be Lowered Than 9000 Rpm During The Use Of The Spindle. Also ,It Should Be Noted That The Spindle Only Can Rotate Clockwise But Not Counter-Clockwise..
Features
- Simple discreption This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ, precision tapered bore is less than 0.005mm and runout off is Less than 0.01mm.
- Spindle speed The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than 9000 rpm during the use of the spindle. Also ,it should be noted that the spindle only can rotate clockwise but not counter-clockwise.
- How to wring it to Inverter The spindle s terminal U1, V1, W1 are connected separately to inverter s terminal U, V,W. Connect any 2pin terminal R, S or T of the inverter to 220VAC.
- Note Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be eliminated by the coolant circulation system.
- Main application Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: ChangSheng
Weight: 5.20 Pounds
See On Amazon #9
RATTMMOTOR 500W CNC Air Cooled Spindle Motor ER11 12000RPM + Input Voltage AC110V-220V Speed Controller with Power Supply + 52mm Clamp for CNC Router Milling Machine
Asin: B07ZHFV4N5 | Ean: 0769135311916 | UPC: 769135311916
Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
Speed Controller-- Armature Output Voltage: Dc0 ~ 100V Adjustable; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz(User Can Change The Power Supply To 110V According To Their Needs); Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast)..
Features
- Air Cooled Spindle-- Power: 500W; Idling Speed: 2000-12000r/min; Torque 0.5NM; Diameter: 52mm.
- Speed Controller-- Armature output voltage: DC0 ~ 100V adjustable; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz(User can change the power supply to 110V according to their needs); Current Limit: 6A; Wiring: Terminal type (Convenient and fast).
- Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 2.20 x 7.83 inches | Weight: 3.68 pounds
See On Amazon #10
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
Asin: B01LNBOCDA | Model: 500W | PartNumber: 500W | Ean: 0713839365553 | UPC: 713839365553
🛠️【Speed Power Switch】- Input Voltage: Ac110v/220V, 50/60Hz. Output Current Peak: 6A. Output Voltage: Dc0-100V. Please Install In The Place That Is Draughty, No Dramatic Impact, No Vibration, No Explosion Hazard Medium, No Conductive Metal Particle..
🛠️【Er11 Collet Chuck】- 13Pcs Er11 Collet Set Gripping Range: 1Mm To 7Mm(1Mm,1.5Mm,2Mm,2.5Mm,3Mm,3.5Mm,4Mm,4.5Mm,5Mm,5.5Mm,6Mm,6.5Mm,7Mm). Run-Out Tolerance 0.01Mm. For Cnc Milling Lathe Tool & Work Holding Engraving Machine..
🛠️【 52Mm Mount Bracket】- Made Of High Quality Cast Aluminum, This Spindle Motor Bracket Clamp Is Strong And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
🛠️【500W Cnc Spindle Motor】- Operating Voltage: 100Vdc, Power: 500W, Input: Ac110v, Speed: Up To Idle Up To 12,000 Rev / Min, Torque: 5000G/Cm. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03..
Features
- CNC Spindle kit 500W - 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
- 500W CNC Spindle motor - Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
- Speed Power Switch - Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
- 52mm Mount Bracket - Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- ER11 Collet Chuck - 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: Mysweety
Dimensions: 7.48 x 11.42 x 6.69 Inches
See On Amazon #11
RATTMMOTOR 800W Spindle Motor Kit, 0.8KW 110V ER11 20000RPM 0.79NM Air Cooled DC Spindle Motor+Mach3 Fuction Motor Speed Controller Power Supply Converter AC110V/220V+52mm Mount Clamp for CNC Machine
Asin: B09X2H7M96 | Model: 800W110V-5 | PartNumber: 800W110V-5
【Speed Controller】 Power :800W; Input Voltage: Ac100-Ac220v±10% Global Voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal Type (Convenient And Fast); Support Mach3 Fuction..
【Features】With Overcurrent Protection Cut-Off Device To Make Performance More Reliable; With A Soft Start Device To Eliminate Motor Starting Current Is Too Large..
【Note】This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
【Advantages】This Power Regulator Can Adjust 110 Or 220V According To Customers' Needs. Adopt Pulse Width Technology To Make The Speed More Stable, And The Speed Is High Under Low Speed..
【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000R/Min; Torque：0.79Nm; Diameter: 52Mm..
Features
- Supports Reverse Rotation As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
- Air Cooled Spindle Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque 0.79NM; Diameter: 52mm.
- Speed Controller Power :800W; Input Voltage: AC100-AC220V 10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
- Advantages This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
- Features With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
- Note This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 8.01 x 0.00 Inches | Weight: 3.75 Pounds
Warranty: one year warranty
See On Amazon #12
RATTMMOTOR 2.2KW Water Cooled Spindle Kits 110V Spindle Motor 80mm 24000RPM+2.2KW VFD 110V Inverter 3HP Variable Frequency Drive+Spindle Mount+80W Water Pump+ER20 Collet for CNC Router Milling Machine
Asin: B0756WNP1J | Ean: 0785004503381 | UPC: 785004503381
【80Mm Spindle Motor Mount】Material Is Aluminum,Surface Sandblasted. Compared With The Aluminium Profile Fixture,The Accuracy Is Much Eavier, Much Higher, And It Is Hard To Deform. Fit For Cnc 80Mm Diameter Spindle Motor..
【How To Connect Spindle Motor And Vfd】The Spindle Motor's Aviation Plug Marked With Number 1, 2, 3, 4. Number 1, 2, 3 Port Are Connected Separately With Inverter's Port U, V, W. Number 4 Is The Ground Wire, No Wiring Is Required..
【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also Suitable For 0.8Kw, 1.5Kw, 2.2Kw, 3Kw And Other High Speed Cnc Water Cooled Spindle Motor. Please Remind That The Submersible Pump Should Be Completely Immersed In Water When It Is Working To Ensure That The Submersible Pump Has A Certain Degree Of Cooling..
【2.2Kw Vfd Parameters】Control Model: Spwn. Power: 2.2Kw. Input：1 Or 3 Phase 110V 0-50Hz/60Hz. Output：3 Phase 110V 0-400Hz.Under Normal Circumstances, The Parameters Of The Inverter Have Been Set And Can Be Directly Connected For Use. (Or Please Follow The Instructions To Set The Parameters)..
Features
- 2.2KW Spindle Motor : This is a 110V-2.2KW water-cooled 15A 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle motor only can rotate clockwise but not counterclockwise.
- 2.2KW VFD Parameters Control Model: SPWN. Power: 2.2KW. Input 1 or 3 phase 110V 0-50Hz/60Hz. Output 3 phase 110V 0-400Hz.Under normal circumstances, the parameters of the inverter have been set and can be directly connected for use. (Or please follow the instructions to set the parameters).
- 80mm Spindle Motor Mount Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much higher, and it is hard to deform. Fit for CNC 80mm diameter spindle motor.
- 80W 110V Water Pump Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
- How to Connect Spindle Motor and VFD The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Chang Sheng
Dimensions: 3.15 x 0.01 x 0.00 Inches | Weight: 23.19 Pounds
See On Amazon #13
RATTMMOTOR 500W Spindle Motor CNC Air Cooled Spindle Motor ER11 12-100VDC 0.5NM 12000RPM + 52mm Spindle Motor Mount Clamp for CNC Router Milling Machine
Asin: B09PR6QTK3 | Model: RTM5.2 | PartNumber: RTM5.2
Note: This Motor Has Quiet Operation, Small Volume And High Speed, And The Rear End Of The Motor Is Reinforced With A Cooling Fan, Which Can Be Safely Worked For A Long Time!.
52Mm Diameter Spindle Motor Mount,Compared With The Aluminium Profile Fixture,The Accuracy Is Much Higher , And It Is Hard To Deform..
Can Be Used For Solid Wood Pcb Engraving, Drilling, Etc..
Idling Speed: 2000-12000R/Min; Torque：0.5Nm; Chuck Part Length: 45Mm; Diameter: 52Mm; Insulation Resistance: >2 Megohms; Insulation Dielectric Strength: 400V; Spindle Radial Runout 0.01-0.03 High Precision..
Features
- Power: 500W, Air cooling method, working voltage: 12-100VDC.
- Idling Speed: 2000-12000r/min; Torque 0.5NM; Chuck part length: 45MM; Diameter: 52mm; Insulation resistance: >2 megohms; Insulation dielectric strength: 400V; Spindle radial runout 0.01-0.03 high precision.
- Note: This motor has quiet operation, small volume and high speed, and the rear end of the motor is reinforced with a cooling fan, which can be safely worked for a long time!
- Can be used for solid wood PCB engraving, drilling, etc.
- 52mm Diameter spindle motor mount,compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.20 x 0.01 x 0.00 inches | Weight: 2.54 Pounds
See On Amazon #14
CNC Spindle Motor Kits, 220V 2.2KW 80mm Air Cooled Spindle CNC Spindle CNC Motor + 2.2KW VFD+ 80mm Clamp Mount + Collet kit ER20+ Drill bits+ Wires for CNC Router Machine
Asin: B0B9G2158Q | Model: ytx-2.2v-2.2kw air kit | PartNumber: ytx-2.2v-2.2kw air kit
【Spindle Advantage 】- Authentic 4Pcs Upgraded Steel Bearings Significantly Extend Working Life 3 Times Longer Than Ordinary Spindle Motor; Advanced Dynamic Balance Technology Effectively Reduce The Noise And Increase Stability In The Working Process; Runout Off Less Than 0.005Mm That 10 Times Precision Beyond Normal Spindle Motor..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Wide Application】-Kinds Of Drilling And Engraving Materials , Such As Plastics, Soft Aluminum,Brass, Acrylics, Pvc, Pcb, Wood,Plywood, Nylon..
【Easy And Fast To Assemble 】-The Vfd Had Been Pre-Programmed For Basic Parameters , You Don't Need To Make Extra Setting Up.We Offer Fully Complete Accessories Including Pre-Soldered Aviation Wire With Connector And Power Wire, It Will Take Just 5 Minutes To Install All And Make All Functions Running..
Features
- PACKAGE LIST -1pcs 220V 2.2KW air Cooled Spindle Motor +1pcs 220V 2.2KW VFD + 1pcs 80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches
- EASY AND FAST TO ASSEMBLE -The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
- SPINDLE ADVANTAGE - Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
- WIDE APPLICATION -Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon #15
RATTMMOTOR DC Motor CNC 997 Spindle Motor 400W 12-48VDC 0.99N.m 5000-20000RMP Double Ball Bearing, Diameter 52mm Spindle Motor for DIY Mini CNC Router Lathes Milling Engraver Polishing Machine
Asin: B0CB2R7VGG | Ean: 0754193411661 | UPC: 754193411661
【High Power, High Torque】High Power Spindle Motor With The Beginning Of 9, The Rated Power Is 400W, The Torque Is Up To 15Kg/Cm, The Torque Is 0.99N.M, The Torque Is Strong, Far More Than 7 Motors, It Is The Special Motor For Diy Drilling, Milling, Cutting And Grinding..
【Double Ball Bearings, Strong Magnetism And Low Noise】Front And Rear Ball Bearings Are Highly Efficient And Quiet. With Its Own Cooling Fan, Can Efficiently Solve The Problem Of Heat Dissipation. 7-Stage Rotor, Pure Copper Coil, High Magnetic Force, High Efficiency, Long-Lasting And Durable..
【5000-2000Rpm】Rated Current 1.85A, Rated Voltage 12-48V Dc, Motor Speed Up To 20,000Rpm, 12V/5000Rpm, 24V/10,000Rpm, 36V/15,000Rpm, 48V/20,000Rpm, Supports Forward And Reverse, High Speed, Strong Momentum..
【Motor Size】Motor Length Is 120Mm/4.72Inch, Diameter Is 54Mm/2.13Inch, Shaft Diameter Is 6.35Mm/0.25Inch, Output Shaft Length Is 20Mm/0.79Inch, Motor Weight Is 760G/1.68 Ib..
Features
- Applicable Fields Cutting machines, belt sanders, lathes, milling machines, bench drills, hand drills, polishing machines, bead machines, lawn mowers, wire saws, band saws, electric grinders, engraving machines and other miniature machines.
- Motor size Motor length is 120mm/4.72inch, diameter is 54mm/2.13inch, shaft diameter is 6.35mm/0.25inch, output shaft length is 20mm/0.79inch, motor weight is 760g/1.68 Ib.
- High power, high torque High power spindle motor with the beginning of 9, the rated power is 400W, the torque is up to 15KG/CM, the torque is 0.99N.m, the torque is strong, far more than 7 motors, it is the special motor for DIY drilling, milling, cutting and grinding.
- 5000-2000RPM Rated current 1.85A, rated voltage 12-48V DC, motor speed up to 20,000rpm, 12V/5000rpm, 24V/10,000rpm, 36V/15,000rpm, 48V/20,000rpm, supports forward and reverse, high speed, strong momentum.
- Double ball bearings, strong magnetism and low noise Front and rear ball bearings are highly efficient and quiet. With its own cooling fan, can efficiently solve the problem of heat dissipation. 7-stage rotor, pure copper coil, high magnetic force, high efficiency, long-lasting and durable.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 4.72 x 2.05 x 2.05 Inches
See On Amazon #16
RATTMMOTOR 80mm Spindle Dust Boot Shoe CNC Spindle Motor Double Door Brush Dust Shoe Cover Cleaner Engraving Machine Accessories for CNC Engraver Milling Mahcine (80mm)
Asin: B08LN62PHV | Model: DUCO-3 | PartNumber: DUCO-3 | Ean: 0619191755158 | UPC: 619191755158
The Thickness Of The Steel Plate Is About 1Mm, The Actual Thickness Includes The Paint Surface.
The Size Of The Above And The Picture Are Measured Manually, The Error Is Allowed Within ±2Mm, And The Actual Use Does Not Need To Be Very Precise.
The Actual Width Of The Brush Is 70Mm, Due To Installation Needs, The Actual Size Of The Exposed Part Is About 55Mm.
The Size Of The Dust Outlet Is Fixed, For Connecting A 100Mm Hose.
Features
- Diameter: 80mm, suitable for 80mm CNC spindle motor
- The size of the dust outlet is fixed, for connecting a 100mm hose
- The thickness of the steel plate is about 1mm, the actual thickness includes the paint surface
- The actual width of the brush is 70mm, due to installation needs, the actual size of the exposed part is about 55mm
- The size of the above and the picture are measured manually, the error is allowed within 2mm, and the actual use does not need to be very precise
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
See On Amazon #17
Daedalus CNC Spindle Motor Kit, 500w, ER11, Brushed
Asin: B07VLF63LX | Model: Brushed-500-ER11 | PartNumber: Brushed-500-ER11 | Ean: 8002128849082
★Come With Psu, Rheostat, Spindle Clamp, Cable, Wrench, Butt Terminals And Heat Shrink Tube..
★Cost-Effective, Carbon Brushes Need To Be Replaced Regularly..
★Quiet And Efficient, Smooth Running, Spin Up Fast And Have Minimal Vibration..
★Enough Power For Wood Engraving, Mdf, Plastics, Acrilic, Plexiglass, Foam Board..
Features
- Spindle, 2 Wires-Brushed, 500w, ER11, working voltage 0-100v DC, 0-12000RPM, 2.05"
- Enough Power for wood engraving, MDF, plastics, acrilic, plexiglass, foam board.
- Come with PSU, Rheostat, Spindle Clamp, Cable, Wrench, Butt Terminals and Heat shrink tube.
- Quiet and Efficient, Smooth running, Spin up fast and have minimal vibration.
- Cost-effective, Carbon brushes need to be replaced regularly.
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
Dimensions: 4.57 x 14.57 x 11.93 inches | Weight: 4.93 pounds
See On Amazon #18
RATTMMOTOR CNC DC Spindle Motor ER16 500W Air-Cooled Spindle Motor 52mm 48VDC 12000RPM 600N.m + ER16 Chuck 8mm Collet for CNC Engraving Router Milling Machine
Asin: B09YTC3QRT | Model: 500WER16 | PartNumber: 500WER16
Speed: Idling Speed Can Reach 12000Rmp.
Applications: Can Be Used For Solid Wood, Pcb, Carving, Drilling, Etc..
Spindle Radial Runout 0.01-0.03Mm High Accuracy； Torque: 600N.M.
Diameter: 52Mm; Total Length Of Motor:200Mm.
Features
- Power: 500W; Collet: ER16 Operating Voltage: 48VDC
- Diameter: 52mm; Total length of motor:200mm
- Speed: Idling speed can reach 12000RMP
- Spindle radial runout 0.01-0.03mm high accuracy Torque: 600N.m
- Applications: Can be used for solid wood, PCB, carving, drilling, etc.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 0.00 x 0.01 x 0.00 Inches
See On Amazon #19
RATTMMOTOR ER11 Spindle Motor 300W Air-Cooled Spindle Motor 52mm 12-48VDC 12000RPM 400mN.m for DIY CNC Router Engraver Milling Machine
Asin: B08GKK77W8 | Model: RTMER11 | PartNumber: RTMER11 | Ean: 0619191721023 | UPC: 619191721023
Speed: Idling Speed Can Reach 12000Rpm.
Applications: Can Be Used For Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And Other Materials..
Frequency: 0-400Hz； Torque: 400Mn.M.
Diameter: 52Mm; Total Length Of Motor:175Mm.
Features
- Power: 300W; Operating Voltage: 12-48VDC
- Diameter: 52mm; Total length of motor:175mm
- Speed: Idling speed can reach 12000RPM
- Frequency: 0-400Hz Torque: 400mN.m
- Applications: Can be used for engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and other materials.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 2.05 x 0.01 x 0.00 inches
See On Amazon
Looking For Something Else?
Search