uxcell 25mm Cutting Dia 10mm Depth 8 Flutes T Slot End Mill Cutter 90mm Long
Asin: B078TFJPKB | Model: a15113000ux0330 | PartNumber: a15113000ux0330
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Shank Diameter: 12Mm/0.5"; Main Color: Gray.
Cutting Depth: 10Mm/0.4"; Flute Number: 8.
Cutting Diameter: 25Mm/1"; Total Length: 90Mm/3.5".
Package Content: 1 X T Slot End Mill Cutter, 1X Case; Product Name: T Slot End Mill Cutter.
Features
- Weight: 108g; Material: HSS-AL
- Package Content: 1 x T Slot End Mill Cutter, 1x Case; Product Name: T Slot End Mill Cutter
- Shank Diameter: 12mm/0.5; Main Color: Gray
- Cutting Diameter: 25mm/1; Total Length: 90mm/3.5
- Cutting Depth: 10mm/0.4; Flute Number: 8
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 25mm Cutting Dia 10mm
#1
uxcell Compression Tube Fitting, 1/2 NPT Male x 3/8" Tube OD with Double Ferrules
Asin: B07MXCDVLY | Model: a18112200ux0083 | PartNumber: a18112200ux0083
【No Need To Weld】It Does Not Need To Be Welded When It Is Connected With Steel Pipe, Which Is Conducive To Fire Prevention, Explosion Protection And High Altitude Operation, And Can Remove The Drawbacks Caused By Inadvertent Welding.
【Repeatable Installation】All Joints Can Be Re-Installed, But To Ensure That The Parts Are Not Damaged And Clean.
【Safe & Durable】Strong Connection, Strong Pressure Resistance, Good Sealing And Repeatability, Convenient Installation And Maintenance, Safe And Reliable Operation.
【Double Ferrule】This Fitting Has A Double Ferrule Construction,Reducing The Possibility Of Leakage.
Features
- 1/2 NPT MALE x 9mm(3/8") TUBE OD Tube OD : 9mm(3/8") ; Male Dia : 1/2 NPT ; Ferrule Mini Inner Dia : 10mm/0.39inch
- DOUBLE FERRULE This fitting has a double ferrule construction,reducing the possibility of leakage
- NO NEED TO WELD It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding
- SAFE & DURABLE Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
- REPEATABLE INSTALLATION All joints can be re-installed, but to ensure that the parts are not damaged and clean
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 1.97 x 1.97 inches | Weight: 0.00 pounds
See On Amazon #2
uxcell 20pcs Round Steel Metal Rods, 2mm x 100mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft, 20pcs
Asin: B07KY99NQN | Model: a18102400ux0330 | PartNumber: a18102400ux0330
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 2mm / 0.08"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 0.79 inches
See On Amazon #3
uxcell T-Slot Milling Cutters, 10mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum
Asin: B09YRKPB1D | Model: a22022400ux0582 | PartNumber: a22022400ux0582
Features: The Cutting Edge Is Sharp And Not Easy To Break. High-Frequency Welding Process Is Adopted For The Connection Between The Cutter Head And The Cutter Body. Universal Chamfered Round Shank, Easier Clamping, Stable Cutting Process..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Easy To Use: Used On Drilling And Milling Machines, Machining Centers. Properly Reduce The Cutting Speed And Feed Can Prolong The Life Of The Milling Cutter. Add Cutting Fluid To Protect The Cutting Edge And Make The Cutting Smoother When Working..
Wide Applications: Suitable For Machining T Slotting, Straight Slotting, Side Grooving And Half-Round Keyway On The Work Piece. Widely Used For Milling Stainless Steel, Carbon Steel, Alloy Steel, Copper, Tool Steel, Cast Iron, Aluminum, Etc...
Features
- T-Slot Cutters: Cutting Dia.: 25mm / 0.98"; Cutting Depth: 10mm / 0.39"; Shank Dia.: 12mm / 0.47"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.
- Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..
- Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.
- Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Foam Tubing for Handle Grip Support, 25mm ID 35mm OD 1m Length Green
Asin: B0951ZBCCC | Model: a21011400ux0137 | PartNumber: a21011400ux0137
Advantage - High Elasticity, Strong Tensile, Easy To Bend, And Aging Resistant.
Widely Application - It Is Used To Protect The Handle, Such As For Fitness Equipment, Utensil, Etc. Heat Preservation Insulated For Pipe, Increase The Softness, Anti-Skid And Wear Resistance, Heat Insulation. The Smaller Foam Tubing Is Suitable For Use With Tools, Pens And Other Items With Small Handles. The Larger Foam Tubing Is Suitable For Use With The Handle Of Fitness Equipment.
Non-Slip - Anti-Skid Foam Is Fixed On Tools Or Appliances And Is Not Easy To Slip.Please Note That When Inserting The Rod, It Could Be Easier To Insert To The Foam Tubing With Using Some Lubricant Or Water On The Rod Surface.
Rubber Material - The Tubing Is Made Of Rubber Material, Soft And Durable, Can Be Used Repeatedly. Working Temperature Is -40°C To 80°C(-40°F To 176°F).
Features
- Foam Tubing- 25mm inner dia, 35mm outer dia, 5mm wall thickness, 1m(3.3ft) total length. Suitable 24-25mm OD pipe
- Rubber Material - The tubing is made of Rubber material, soft and durable, can be used repeatedly. Working temperature is -40 C to 80 C(-40 F to 176 F)
- Advantage - High elasticity, strong tensile, easy to bend, and aging resistant
- Non-slip - Anti-skid foam is fixed on tools or appliances and is not easy to slip.Please note that when inserting the rod, it could be easier to insert to the foam tubing with using some lubricant or water on the rod surface
- Widely Application - It is used to protect the handle, such as for fitness equipment, utensil, etc. heat preservation insulated for pipe, increase the softness, anti-skid and wear resistance, heat insulation. The smaller foam tubing is suitable for use with tools, pens and other items with small handles. The larger foam tubing is suitable for use with the handle of fitness equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 39.37 x 1.38 inches
See On Amazon #5
uxcell Carbide Hole Saw Drill Bit, 24mm Hole Cutter for Stainless Steel Alloy Cast Iron Copper Metal Sheet, with Limit Step
Asin: B07FMVVTNX | Model: a18061100ux0421 | PartNumber: a18061100ux0421
All In One: Drill Bit, Spring, Wrench Are Included, No Need To Buy Any Extra Accessories For The Drilling Works. The Special Hole Design Is Conducive To Small Chip Resistance And More Convenient Operation. It Adopts Thickened And Sharp Tungsten Carbide Teeth..
Warm Tips: Keep The Drill Running Evenly At A Low Speed Or Pre-Drill The Center Hole For Extending Hole Cutter Life. Please Add Coolant Or Water When Working On Stainless Steel And Steel Metal Sheets Above 5Mm.
Features: Large Chip Removal On Both Sides, Low Resistance, High Speed, And Higher Drilling Efficiency. High-Strength Carbon Steel, Surface Blasting And Anti-Rust. Used On Hand Held Drill, Bench Drills, Magnetic Drills, Pneumatic Drills And Other Rotating Machines..
Wide Applications: Carbide Hole Saw Provides Fast And Precise Cuts Into Stainless Steel, Alloy, Aluminum, Cast Iron, And Other Metals Up To 5Mm, Also Suitable For Opening Holes In Plastic, Wood, Plywood, Cardboard, Round Or Square Pipes, Equipment Cabinet, Spherical Door Locks..
Features
- Specifications: Cutting dia.: 24mm / 0.94"; shank size: 10mm / 0.39"; cutting depth: 25mm / 0.98"; overall length: 108mm / 4.25"; non-slip triangular shank. Carbide hole cutter is with longer life than normal metal cutting hole cutters
- Wide Applications: Carbide hole saw provides fast and precise cuts into stainless steel, alloy, aluminum, cast iron, and other metals up to 5mm, also suitable for opening holes in plastic, wood, plywood, cardboard, round or square pipes, equipment cabinet, spherical door locks.
- All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works. The special hole design is conducive to small chip resistance and more convenient operation. It adopts thickened and sharp tungsten carbide teeth.
- Features: Large chip removal on both sides, low resistance, high speed, and higher drilling efficiency. High-strength carbon steel, surface blasting and anti-rust. Used on hand held drill, bench drills, magnetic drills, pneumatic drills and other rotating machines.
- Warm Tips: Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 4.33 x 1.97 inches
See On Amazon #6
uxcell 3-in-1 Furniture Connecting Kit 13mm OD Cam Fitting, M6x25mm Dowel Screws, 10.7mm OD Pre-Inserted Nut 8 Sets
Asin: B07JHCMHWN | Model: a18082400ux0021 | PartNumber: a18082400ux0021
Package Details: 8 Sets Of Furniture Connection Accessories. Each Set Includes A Fitting Cam Lock Nut, A Positioning Pin Connecting Rod Bolt, And A Pre-Inserted Nut. According To The External Dimensions Of Each Component, Making Holes And Combination Installation Is Carried Out..
Features: A Combination Of Various Types Of Furniture Suitable For Installation And Quick Disassembly, Especially When The Fixing Effect Of Non-Solid Wood Fasteners Is Not Enough, The Three-In-One Eccentric Cam Connection Assembly Is Good..
Note: When Locking, The Cam Lock Nut Can Be 90 Degrees +/- 5 Degrees, And It Cannot Be Locked With Too Much Force, Which May Cause The Eccentric Wheel Assembly To Be Unusable..
Application: Suitable For All Kinds Of Furniture With Chipboard And Wood Board Combination. Office Furniture, Cabinets, Bookshelves, Wardrobes, Wooden Double Beds, And Other Wood-To-Wood Connection And Fixation..
Features
- Cam Fittings Size: 13 x 10mm(D*H); Dowel Size: M6 x 25mm(D*L); Pre-inserted Nut Size: 10.7 x 5.5 x 10mm(OD*ID*H)
- Application: Suitable for all kinds of furniture with chipboard and wood board combination. Office furniture, cabinets, bookshelves, wardrobes, wooden double beds, and other wood-to-wood connection and fixation.
- Package Details: 8 sets of furniture connection accessories. Each set includes a fitting cam lock nut, a positioning pin connecting rod bolt, and a pre-inserted nut. According to the external dimensions of each component, making holes and combination installation is carried out.
- Note: When locking, the cam lock nut can be 90 degrees +/- 5 degrees, and it cannot be locked with too much force, which may cause the eccentric wheel assembly to be unusable.
- Features: A combination of various types of furniture suitable for installation and quick disassembly, especially when the fixing effect of non-solid wood fasteners is not enough, the three-in-one eccentric cam connection assembly is good.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 Inches
See On Amazon #7
uxcell Lathe Tool Bit Set 10mmx10mmx200mm 12mmx12mmx200mm, Square HSS (High Speed Steel) Lathe Turning Tools Fly Cutter Mill Blank, 4pcs
Asin: B09LVH2ZRL | Model: f21092400ux0003 | PartNumber: f21092400ux0003
Material: High Speed Steel (Hss) Is With High Hardness, High Wear Resistance And High Heat Resistance, Also Known As High Speed Tool Steel Or Sharp Steel..
Special Design: The Lathe Turning Tools Are Superior Finishing Tools. Features Parallel Style Cutter, With Continuous Width Of Cutting Edge Throughout Length Of Tool Bit..
Easy To Use: Widely Used On A Lathe, A Milling Machine Fly Cutter Or A Metal Sharper. Great Turning Tools As Lathe Parts And Accessories.
Wide Applications: Can Make Excellent And Smooth Cuts In Hard Materials, Such As Mild Steel, Cast Iron, Alloy And Tool Steel. Suitable For Milling, Turning, Parting, Engraving, Drilling, Punching, Etc..
Features
- Tool Bit Size: 10mm x 10mm x 200mm / 0.39" x 0.39" x 7.87", 12mm x 12mm x 200mm / 0.47" x 0.47" x 7.87". The hardness is HRC60~62.
- Wide Applications: Can make excellent and smooth cuts in hard materials, such as mild steel, cast iron, alloy and tool steel. Suitable for milling, turning, parting, engraving, drilling, punching, etc.
- Material: High Speed Steel (HSS) is with high hardness, high wear resistance and high heat resistance, also known as high speed tool steel or sharp steel.
- Easy to Use: Widely used on a lathe, a milling machine fly cutter or a metal sharper. Great turning tools as lathe parts and accessories
- Special Design: The lathe turning tools are superior finishing tools. Features parallel style cutter, with continuous width of cutting edge throughout length of tool bit.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 10pcs 25mm Carbon Steel Bearing Balls Precision Polished
Asin: B0B5PM5Q12 | Model: a22033000ux1007 | PartNumber: a22033000ux1007
Features - Wide Range Of Applications(Maintain Industrial Equipment Or Use For Family Diy Projects); Cost-Effective(Can Repair Existing Products).
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Maintain Product That Uses Steel Balls, Such As Ball Bearings, Turntable, Drawer Slides, Casters, Door Locks; Diy Projects Like A Keychain, Or Adding Weight For Your Projects, Etc..
Material - Made Of Carbon Steel Which Lowers The Cost For Your Maintenance..
Features
- Size - 25mm Diameter Mirror Polished Precision Balls
- Material - Made of carbon steel which lowers the cost for your maintenance.
- Features - Wide range of applications(maintain industrial equipment or use for family DIY projects); Cost-effective(can repair existing products)
- Applications - Maintain product that uses steel balls, such as ball bearings, turntable, drawer slides, casters, door locks; DIY projects like a keychain, or adding weight for your projects, etc.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell ER25 10mm Spring Collet Chuck for CNC Engraving Machine Lathe Milling Tool
Asin: B07KCB83NJ | Model: a18092200ux0502 | PartNumber: a18092200ux0502
Precision - 0.015Mm / 0.0006-Inch.
Package Content - 1 X Spring Collet Chuck.
Applications - Suitable For Manual Vertical Or Horizontal Milling Machines, Drilling Machines And Other Equipment..
Material - 40Cr Steel, General Hardness And Wear Resistance.
Features
- Model - ER-25 Spring Collet, 10mm Clamping Diameter.
- Material - 40Cr Steel, general hardness and wear resistance
- Precision - 0.015mm / 0.0006-inch
- Applications - Suitable for manual vertical or horizontal milling machines, drilling machines and other equipment.
- Package Content - 1 x Spring Collet Chuck
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 3.94 x 3.15 inches
See On Amazon #10
uxcell T-Slot Milling Cutters, 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum
Asin: B09YRKBJXD | Model: a22022400ux0578 | PartNumber: a22022400ux0578
Features: The Cutting Edge Is Sharp And Not Easy To Break. High-Frequency Welding Process Is Adopted For The Connection Between The Cutter Head And The Cutter Body. Universal Chamfered Round Shank, Easier Clamping, Stable Cutting Process..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Easy To Use: Used On Drilling And Milling Machines, Machining Centers. Properly Reduce The Cutting Speed And Feed Can Prolong The Life Of The Milling Cutter. Add Cutting Fluid To Protect The Cutting Edge And Make The Cutting Smoother When Working..
Wide Applications: Suitable For Machining T Slotting, Straight Slotting, Side Grooving And Half-Round Keyway On The Work Piece. Widely Used For Milling Stainless Steel, Carbon Steel, Alloy Steel, Copper, Tool Steel, Cast Iron, Aluminum, Etc...
Features
- T-Slot Cutters: Cutting Dia.: 25mm / 0.98"; Cutting Depth: 4mm / 0.16"; Shank Dia.: 12mm / 0.47"; Total Length: 100mm / 3.94"; Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates.
- Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc..
- Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process.
- Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search