Fastronix 3/8" 4 Stud Stainless Steel Ground Distribution Block with Cover
Asin: B078VGH8DW | Model: 406-216 | PartNumber: 406-216 | Ean: 0635414975745 | UPC: 635414975745
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Nickel Plated Brass Bus-Bar And Stainless Steel Hardware For Increased Current Transfer.
Use With Fastronix 2 And 4 Gauge Quality Copper Lugs (405-013 And 405-113).
Block Is 6.5"X 1.5"X 2" And Rated To 250 Amps At 12Vdc.
3 Additional 20 Amp Screw Terminals For Smaller Ground Wires.
Features
- Corrosion Resistant 3/8" Stainless Steel Studs
- 3 Additional 20 Amp Screw Terminals for Smaller Ground Wires
- Nickel Plated Brass Bus-Bar and Stainless Steel Hardware for Increased Current Transfer
- Block is 6.5x 1.5x 2 and Rated to 250 Amps at 12VDC
- Use with Fastronix 2 and 4 Gauge Quality Copper Lugs (405-013 and 405-113)
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 2.00 x 6.50 x 1.50 inches
See On Amazon Similar To Fastronix 3 8 4 Stud
#1
LC LICTOP 5/16 Stud Premium Remote Battery Power Junction Post Connector Terminal Kit,Pack of 2 (8mm Red & Black)
Asin: B07M69KV8D | Model: LXMY0360 | PartNumber: LXMY0360 | Ean: 0754021107841 | UPC: 754021107841
Features: Pure Copper Terminal Block, High Efficiency, Bakelite Insulation Materials, With Perfect Safety Performance..
Application: Widely Used In The Separation And Distribution Of Welding Machines, Charging Generators, Ships, Trucks, Automobiles.
Easy To Install: 2 Nut System Is Simple To Install And Flexible To Tighten The Connector Without Worrying About Loosening The Bolt From The Bolt..
8Mm(5/16") Stud Design High Current Terminal Block.Easy To Install And Flexible To Use..
Features
- Package includes: 2 x Stud Connector (Black x 1; Red x 1)
- 8mm(5/16) stud design high current terminal block.Easy to install and flexible to use.
- Features: Pure copper terminal block, high efficiency, bakelite insulation Materials, with perfect safety performance.
- Easy to install: 2 nut system is simple to install and flexible to tighten the connector without worrying about loosening the bolt from the bolt.
- Application: Widely used in the separation and distribution of welding machines, charging generators, ships, trucks, automobiles
- See more on Amazon...
Brand: LC LICTOP | Manufacturer: Shenzhenshilixiangmaoyiyouxiangongsi
Weight: 0.09 Kilograms
See On Amazon #2
Fastronix Marine Battery Terminal Cover Set
Asin: B091FVHDVH | Model: 404-102 | PartNumber: 404-102
Use To Cover Marine Style Battery Terminals With Studs.
Note: Terminals Are Not Included, See Fastronix 940-402 For Complete Terminal And Cover Kit.
Prevent Incidental Shorting By Covering Entire Terminal.
Designed For Maximum Durability And Flexibility.
Features
- Made in the USA
- Designed for Maximum Durability and Flexibility
- Use to Cover Marine Style Battery Terminals with Studs
- Prevent Incidental Shorting by Covering Entire Terminal
- Note: Terminals Are NOT Included, see Fastronix 940-402 for Complete Terminal and Cover Kit
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
Dimensions: 1.88 x 4.25 x 1.63 inches
See On Amazon #3
5/16" Single Stud Battery Junction Posts, Ampper M8 Heavy Duty Power and Ground Junction Block Power Distribution Studs Terminal Kit, Pack of 2 (Red and Black)
Asin: B08SMG6JST | Model: Am-BJPS02 | PartNumber: Am-BJPS02
Fitment: 200 A Continuous At Dc 12V, Fit For Max Up To Dc 48V Power Distribution Stud Application..
Compatible: Used As Battery Junction Block, For Car, Vehicle, Rv And Boat, Also Electrical Equipment And Solar Cells Etc...
Heavy Duty: Nylon Construction With Stainless Steel Stud For Strength And Durability..
Easy To Install: Panel Surface Install With Screw Mounting Holes For Any Orientation Installation..
Features
- Function: used to connect two or more connectors / wires, as battery junction post for battery power and ground junction. Very useful for customizing or relocating battery and wires.
- Easy to install: panel surface install with screw mounting holes for any orientation installation.
- Fitment: 200 A continuous at DC 12V, fit for max up to DC 48V power distribution stud application.
- Heavy Duty: nylon construction with stainless steel stud for strength and durability.
- Compatible: used as battery junction block, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc..
- See more on Amazon...
Brand: Ampper | Manufacturer: Ampper
Dimensions: 0.70 x 2.00 x 0.70 inches | Weight: 0.13 Pounds
See On Amazon #4
Thru Panel Battery Cable Bulkhead Connectors with Copper Core 3/8" Terminal Post, Red and Black
Asin: B07QKPHMH1 | Model: RB-CC-BBC | PartNumber: RB-CC-BBC
⚡ Battery Relocation Kit: Great Solution For Remote Mount Batteries And Shutoff Switch Projects..
⚡ 100% Satisfaction Guaranteed: If You Have Any Issues With Your Order, Contact Us And We Will Make It Right..
⚡ Marine Electrical: Great Bulkhead Connectors For Positive And Ground Cables For Your Boat..
⚡ Car Audio Terminals: Easily Wire Your Amp Or Remote Batteries For A Clean Car Stereo Install..
Features
- MULTIPLE APPLICATIONS: You won't find a better firewall connector for automotive power cables.
- CAR AUDIO TERMINALS: Easily wire your amp or remote batteries for a clean car stereo install.
- BATTERY RELOCATION KIT: Great solution for remote mount batteries and shutoff switch projects.
- MARINE ELECTRICAL: Great bulkhead connectors for positive and ground cables for your boat.
- 100% SATISFACTION GUARANTEED: If you have any issues with your order, contact us and we will make it right.
- See more on Amazon...
Brand: R2X Racing | Manufacturer: R2X Racing
Dimensions: 1.75 x 3.00 x 1.75 Inches | Weight: 1.00 Pounds
See On Amazon #5
Fastronix 3/8" Stainless Steel Single Stud Power and Ground Junction Block Red and Black
Asin: B01LM01CNA | Ean: 0635414975615 | UPC: 635414975615
Red And Black Nylon Construction With Mounting Holes.
Integrated Nut At The Bottom Of The Stud For Tightening.
Use With Fastronix Stud Covers 404-120 For A Complete Installation.
Mounts With #10 Machine Screws.
Features
- Includes (1) Red and (1) Black 3/8" Junction Block
- Mounts with #10 Machine Screws
- Red and Black Nylon Construction with Mounting Holes
- Use with Fastronix Stud Covers 404-120 for a Complete Installation
- Integrated Nut at the Bottom of the Stud for Tightening
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
See On Amazon #6
5/16" Battery Power & Ground Insulated Stainless Steel Stud Junction Post (Red & Black Set)
Asin: B07B44F4ZW | Ean: 0859668006530 | UPC: 859668006530
Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments.
Used To Connect 2 Or More Wires.
Features
- Set Of 1 Red & 1 Black Insulated Terminals
- Used To Connect 2 Or More Wires
- Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments
- See more on Amazon...
Brand: JQuad
See On Amazon #7
Fastronix 5/16" Single Stud Ground Junction Block
Asin: B00HZU42Z2 | Model: 406-204 | PartNumber: 406-204
Includes Lock Washer And Nut.
Integrated Nut At The Bottom Of The Stud For Tightening.
Black Nylon Construction.
Features
- 5/16" Single Stud Ground Junction Block
- Black Nylon Construction
- Includes Lock Washer and Nut
- Integrated Nut at the Bottom of the Stud for Tightening
- See more on Amazon...
Brand: Fastronix Solutions | Manufacturer: Fastronix Solutions
See On Amazon #8
1-2-Both-Off Battery Switch, 12-48V 200-1000 Amps Battery Power Cutoff Master Switch Disconnect Isolator for Car Vehicle RV ATV UTV Marine Boat
Asin: B07Z5QWFNF | Model: A5202C | PartNumber: A5202C
【Application & Easy To Use】This Battery Cut Off Kill Switch Has Four Removable Side Plates Provide Access Of Up To 1/0 Cables. Widely Used For Car, Vehicle, Rv, Atv And Boat Batteries, Also Used For Electrical Equipment. Vertical Knife Blade Type, Easy To Install & Simple To Use..
【100% Satisfaction Guarantee】If You Have Any Issues With Our Battery Disconnect Switch, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
【Function】Used For Battery To Isolate And Secure The Electrical System, Eliminate Any Power Draw From The Battery When Vehicle Or Boat Is Not In Use, Disconnects The Battery Safely, Can Stand Alone Or Be Locked Together With Other Switch..
【Operation】1-2-Both-Off, Rating: 200A Dc Continuous (1Hr) , 300A Dc Intermittent (5 Min), 1000A Dc Cranking (10 Sec), Voltage: 48V Dc, Stud Size: 3X5/16" (8Mm)..
Features
- High Quality A ABIGAIL Battery Power Cutoff Master Switch is made of Heavy Duty ABS plastic housing which is durable made for safety use. The rear cover insulating the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements.
- Operation 1-2-Both-Off, Rating: 200A DC Continuous (1hr) , 300A DC Intermittent (5 min), 1000A DC Cranking (10 sec), Voltage: 48V DC, Stud Size: 3x5/16 (8mm).
- Application & Easy to Use This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables. Widely used for Car, Vehicle, RV, ATV and Boat batteries, also used for electrical equipment. Vertical knife blade type, easy to install & simple to use.
- Function Used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely, can stand alone or be locked together with other switch.
- 100% satisfaction guarantee If you have any issues with our Battery Disconnect Switch, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
Weight: 0.10 Pounds
See On Amazon #9
3/8" Heavy Duty Dual Studs Battery Junction Post Terminal Kit, Ampper 2 Studs M10 Bus Bar Power and Ground Junction Block Distribution (W/Cover, Red and Black)
Asin: B0BY8QL651
Fitment: 200 A Continuous At Dc 12V, Fit For Max Up To Dc 48V Power Distribution Stud Application..
Compatible: Used As Battery Junction Block, For Car, Vehicle, Rv And Boat, Also Electrical Equipment And Solar Cells Etc...
Heavy Duty: With Cover, Nylon Construction With Stainless Steel Stud For Strength And Durability..
Easy To Install: Panel Surface Install With Screw Mounting Holes For Any Orientation Installation..
Features
- Function: used to connect two or more connectors / wires, as battery junction posts for battery power and ground junction. Very useful for customizing or relocating battery and wires.
- Easy to install: panel surface install with screw mounting holes for any orientation installation.
- Fitment: 200 A continuous at DC 12V, fit for max up to DC 48V power distribution stud application.
- Heavy Duty: with cover, nylon construction with stainless steel stud for strength and durability.
- Compatible: used as battery junction block, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc..
- See more on Amazon...
Brand: Ampper | Manufacturer: Ampper
Dimensions: 0.70 x 2.00 x 0.70 inches | Weight: 0.13 Pounds
See On Amazon #10
Joinfworld Thru Panel Battery Bulkhead Connectors 3/8" Stud 250A Battery Charging Jump Post Kit with Cover for Automotive Marine Auto RV Truck Can-am
Asin: B0CFH3RXQL | Model: BCP-2 | PartNumber: BCP-2
Easy To Install: The 250A Battery Charging Post Is Mounted Through The Main Panel For Quick And Easy Use Of The Battery Terminals, You Can Hook Up Jumper Cables More Convenient..
Wide Application: This Thru Panel Battery Bulkhead Connectors With 3/8" Stud Is Suitable For Can Am Maverick X3, Car, Utv, Atv, Boat, Etc..
With Protect Cover: Each Set Of Car Battery Charging Terminals Will Come With One Red And One Black Protect Cover, Which Can Not Only Shelter The Exposed Contact, Prevent Dust And Accidental Contact When Not Use, But Also Make The Positive And Negative Side Easy To Identify..
Specification: The Thru Panel Battery Bulkhead Connectors Can Be Mounted In Up To 0.3" Thickness Panel Through 1-1/4" Hole. In Addition, The Terminal Of The Battery Jumper Terminals Features 3/8" Stud And Internal Copper Core Design, Which Allows Larger Size Wires Installation And Makes It Safer To Carry Large Amperage..
Features
- Battery Bulkhead Connectors: These remote battery bulkhead connectors with 3/8" stud. Allows you through a firewall the right way easily, such as charging battery, jump start vehicle, etc. The rated current is 250A.
- Specification: The thru panel battery bulkhead connectors can be mounted in up to 0.3 thickness panel through 1-1/4 hole. In addition, the terminal of the battery jumper terminals features 3/8 stud and internal copper core design, which allows larger size wires installation and makes it safer to carry large amperage.
- Easy to Install: The 250A Battery Charging Post is mounted through the main panel for quick and easy use of the battery terminals, you can hook up jumper cables more convenient.
- With Protect Cover: Each set of car battery charging terminals will come with one red and one black protect cover, which can not only shelter the exposed contact, prevent dust and accidental contact when not use, but also make the positive and negative side easy to identify.
- Wide Application: This thru panel battery bulkhead connectors with 3/8 Stud is suitable for Can Am Maverick X3, car, UTV, ATV, boat, etc.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
See On Amazon
Looking For Something Else?
Search