uxcell 8mm to 6.35mm Bore One Diaphragm Motor Wheel Flexible Coupling Connector
Asin: B078VRLCTN
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Accommodates Angular, Axial And Parallel Misalignment.
Shaft Couplers Suitable For Connect Servo Motor, Stepper Motor, Encoder, Screw Driving, Machine Platform, Etc..
Aluminum Hubs For Light Weight, Stainless Steel Discs For Strength.
Clamp-Style Mount For Secure Attachment To Shaft.
Features
- 32mm Diameter X 30mm Length; 10000RPM rotational speed
- Clamp-style mount for secure attachment to shaft
- Accommodates angular, axial and parallel misalignment
- Aluminum hubs for light weight, stainless steel discs for strength
- Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 8mm to 6.35mm Bore
#1
uxcell 1/4 inch to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs
Asin: B07P968PP2
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 1/4 inch to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #2
uxcell FR4-2RS Flanged Ball Bearing 1/4 x 5/8 x 10/51 inch Double Sealed Chrome Steel Flange Bearings, 20pcs
Asin: B0CH2JPCPK | Ean: 0766549979404 | UPC: 766549979404
[Easy To Maintain] - Both Sides Are Rubber-Sealed, Oil- And Liquid-Resistant. Z1 Noise Level For Most General Use..
[Note] - Please Refer To The Picture And Select The Right Type Of Bearings Before Ordering (Sealed Or Shield On Both Or Single Side Of The Bearing)..
[Application] - Commonly Used For Glider/Rocker Arms, Wheels Of The Cart, Lawnmowers, Printers, Motors, Gearboxes, Reducer, Textile Machinery, Electronic Equipment, And More..
[Durable] - Chrome Steel (Gcr15) Races Offer High Hardness And Great Wear Resistance, Thus Extend Bearings' Service Life..
Features
- [Size] - FR4-2rs ABEC1 Bearings ( I.D.=1/4", O.D.=5/8", Thickness=10/51"; Flange Dia: 17.5mm, Flange Thickness: 1mm ).
- [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life.
- [Easy to Maintain] - Both sides are rubber-sealed, oil- and liquid-resistant. Z1 noise level for most general use.
- [Application] - Commonly used for glider/rocker arms, wheels of the cart, lawnmowers, printers, motors, gearboxes, reducer, textile machinery, electronic equipment, and more.
- [Note] - Please refer to the picture and select the right type of bearings before ordering (Sealed or Shield on BOTH or SINGLE side of the bearing).
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.07 Pounds
See On Amazon #3
uxcell 1/4 Inch to 8mm Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Dark Blue
Asin: B08H89MKHB
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/4 inch to 8mm; Total Length: 25mm /0.98 inch, Outside Diameter : 18mm/ 0.71 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Router Collet Driver Adapter Convert 8mm to 6.35mm (1/4") for CNC Engraving Milling Bit Woodworking Carving Machine 2pcs
Asin: B09BM5CQ8F | Model: a21042400ux0063 | PartNumber: a21042400ux0063
Suitable For Engraving Machine, Cnc Machine And Wood Router Chuck Conversion..
Easy To Use. Just Slide The Adapter Into Your Collet And Tighten..
Provide Precision, Tight And Stable Clamping Force For Work Efficiency..
Made Of Carbon Steel For High Hardness And Strength. Black Oxide Finish For Corrosion And Wear Resistance..
Features
- Outer diameter (OD): 8mm / 0.31"; inner diameter: 6.35mm / 1/4"; total length: 25mm / 0.98"
- Made of carbon steel for high hardness and strength. Black oxide finish for corrosion and wear resistance.
- Suitable for engraving machine, CNC machine and wood router chuck conversion.
- Provide precision, tight and stable clamping force for work efficiency.
- Easy to use. Just slide the adapter into your collet and tighten.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 8mm to 6.35mm Shaft Coupling 40mm Length 25mm Diameter Coupler Aluminum Alloy Joint Motor for 3D Printer CNC Machine DIY Encoder
Asin: B06X9WKRGL | Model: SYNCE007201 | PartNumber: SYNCE007201
Feature: Screw Type(Coiling Clamping); Main Color: Silver Tone.
The Shaft Couplers Are Widely Applied To Small Cnc Machines Encoding And 3D Printers Z Shaft Coupling, Simplifies The Debugging Difficulty..
Flexibility Of Coupling Shaft Removes Stress Between The Motor And Driving Components..
Material: Aluminum Alloy; Size: 40X25mm/ 1.57X0.98Inch( L*D).
Features
- Shaft Usage: 8mm to 6.35mm / 0.31 to 0.25 inch
- Material: Aluminum alloy; Size: 40x25mm/ 1.57x0.98inch( L*D)
- Feature: Screw Type(Coiling Clamping); Main Color: Silver tone
- Flexibility of coupling shaft removes stress between the motor and driving components.
- The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Sleeve Bearing 8mm Bore x 10mm OD x 6mm Length Plain Bearings Wrapped Oilless Bushings 10pcs
Asin: B07SN3RBKW | Model: a19032100ux0046 | PartNumber: a19032100ux0046
Carbon Steel Base With Bronze Sintered And Composite Coating. Suitable For Sliding Movements.
Wide Application Such As Textile Machine, Printing Machine, Hydraulic Loader, Fitness Equipment And Agricultural Machinery.
Featured With Good Load Capacity And Wear Resistance Performance.
Oilless, Maintenance-Free, Good Frictional Property.
Features
- Bore: 8mm, Outside Diameter: 10mm, Length: 6mm
- Oilless, maintenance-free, good frictional property
- Carbon steel base with Bronze Sintered and composite coating. Suitable for sliding movements
- Featured with good load capacity and wear resistance performance
- Wide application such as textile machine, printing machine, hydraulic loader, fitness equipment and agricultural machinery
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B07P6X92BT
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #8
uxcell #25 Roller Chain Idler Sprocket, 8mm Bore 1/4" Pitch 19 Tooth Sprocket Tensioner, C45 Carbon Steel 25 Roller Chain Sprocket with Bearing for ISO 04C Chain, 2Pcs
Asin: B0CCW35QMN
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 19; Outside Diameter: 42mm / 1.65-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 6mm to 6.35mm Bore L31xD20 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor
Asin: B08NHZVB2Y | Model: a20101400ux0023 | PartNumber: a20101400ux0023
Jaw Couplings Have Three Parts: Two Metallic Hubs And An Elastomer Insert Called An Element, But Commonly Called ""..
Wear Resistant ,High Hardness And Excellent Response.Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Color: Silver Tone; Material: Aluminum Alloy; Fixed Type: Clamp; Thread Size: M3; Connection Diameter: 6Mm To 6.35Mm; Total Length: 31Mm/1.22 Inch; Outside Diameter : 20Mm/ 0.79 Inch; ; Package List:; 1X Flexible Shaft Coupler.
It Is Designed To Transmit Torque While Damping System Vibrations And Accommodating Misalignment To Protect Other Components From Damage..
Features
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs.
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage.
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called .
- Color: Silver Tone; Material: Aluminum Alloy; Fixed Type: Clamp; Thread Size: M3; Connection Diameter: 6mm to 6.35mm; Total Length: 31mm/1.22 inch; Outside Diameter : 20mm/ 0.79 inch; ; Package List:; 1x Flexible Shaft Coupler
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 8mmx6.35mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler
Asin: B078VRK9FN | Model: a17110100ux0196 | PartNumber: a17110100ux0196
Accommodates Angular, Axial And Parallel Misalignment.
Shaft Couplers Suitable For Connect Servo Motor, Stepper Motor, Encoder, Screw Driving, Machine Platform, Etc..
Aluminum Hubs For Light Weight, Stainless Steel Discs For Strength.
Clamp-Style Mount For Secure Attachment To Shaft.
Features
- 32mm Diameter X 40mm Length; 10000RPM rotational speed
- Clamp-style mount for secure attachment to shaft
- Accommodates angular, axial and parallel misalignment
- Aluminum hubs for light weight, stainless steel discs for strength
- Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 8mm to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue
Asin: B07PB4KZ4F
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 Inches
See On Amazon #12
uxcell #25 Chain Roller Sprocket, 8mm Bore 1/4" Pitch 9 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RGB13
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 9, Outside Diameter: 21mm / 0.83-inch, Bump Width: 8.5mm / 0.33-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 8mm / 0.31-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 6.35mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs
Asin: B0913967Z6 | Model: a20112600ux0079 | PartNumber: a20112600ux0079
Absorption Of Parallel, Angular Misalignments And Shaft End-Play By Spring Action..
Package Content: 1 X Shaft Coupling.
Widely Used In Drive Systems For Encoders, Instrumentation,Lead Screws, Small Pumps, Feed Rollers And Anywhere Light To Medium Duty, Torsionally Flexible Coupling Is Required..
Zero Backlash. One-Piece Metallic Spring Coupling. For Little Torque Shaft Connect..
Features
- Material: Aluminum alloy; Connection Diameter: 6.35mm to 8mm; Total Length: 25mm /0.98 inch; Outside Diameter : 19mm/ 0.75 inch
- Zero backlash. One-piece metallic spring coupling. For little torque shaft connect.
- Absorption of parallel, angular misalignments and shaft end-play by spring action.
- Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required.
- Package Content: 1 x Shaft coupling
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 1/4 Inch to 8mm Bore Rigid Coupling Set Screw L25XD18 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories
Asin: B08GY6W31B
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 1/4 inch to 8mm; Total Length: 25mm/0.98 inch, Outside Diameter:18mm/0.7 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZ799
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon #16
uxcell #25 Chain Roller Sprocket, 8mm Bore 1/4" Pitch 12 Tooth Single Strand Chain Sprocket, C45 Carbon Steel 25 Roller Chain Sprocket with Set Screws for ISO 04C Chain, 2Pcs
Asin: B0CD1RM9WR
The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use. Fully Black Oxide Coated, Rust Resistance..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. Round Hole With 2Pcs Set Screws At 90 Degrees. The Shaft Can Be Fixed Well, Which Is Convenient To Use..
Features
- Specifications: Number of Teeth: 12, Outside Diameter: 27.5mm / 1.08-inch, Bump Width: 12mm / 0.47-inch, Total Width: 15mm / 0.59-inch, Bore Diameter: 8mm / 0.31-inch, Pitch: 1/4-inch / 6.35mm, Tooth Width: 3mm / 0.12-inch, Set Screw Size: M5, 2 x Chain Sprocket, 4 x Set Screws
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Shaft Coupling 6mm to 8mm Bore L30xD20 Flexible Coupler Joint for Servo Stepped Motor
Asin: B07G6Q4LFD | Model: a18060800ux0132 | PartNumber: a18060800ux0132
Jaw Couplings Have Three Parts: Two Metallic Hubs And An Elastomer Insert Called An Element, But Commonly Called ""..
Wear Resistant ,High Hardness And Excellent Response.Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Main Color: Silver Tone; Shaft Usage: 6Mm To 8Mm/0.24 Inch To 0.31 Inchtotal Size: 30 X 20Mm / 1.18 Inch X 0.79 Inch (L*D); Feature: Set Screwsthread Size: M3.
It Is Designed To Transmit Torque While Damping System Vibrations And Accommodating Misalignment To Protect Other Components From Damage..
Features
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs.
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage.
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called .
- Main Color: Silver Tone; Shaft Usage: 6mm to 8mm/0.24 inch to 0.31 inchTotal Size: 30 x 20mm / 1.18 inch x 0.79 inch (L*D); Feature: Set screwsThread Size: M3
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 inches
See On Amazon #18
uxcell 6.35mmx8mm Clamp Tight Motor Shaft 2 Diaphragm Coupling Coupler
Asin: B078VSHFCF | Model: a17110100ux0181 | PartNumber: a17110100ux0181
Accommodates Angular, Parallel Misalignment.
Shaft Couplers Suitable For Connect Servo Motor, Stepper Motor, Encoder, Screw Driving, Machine Platform, Etc..
Aluminum Hubs For Light Weight, Stainless Steel Discs For Strength.
Clamp-Style Mount For Secure Attachment To Shaft.
Features
- 26mm Diameter X 35mm Length; 10000RPM rotational speed
- Clamp-style mount for secure attachment to shaft
- Accommodates angular, parallel misalignment
- Aluminum hubs for light weight, stainless steel discs for strength
- Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 2pcs Shaft Coupling 6.35mm to 6.35mm Bore L25xD20 Flexible Coupler Joint for Servo Stepped Motor
Asin: B07G6PXF8T | Model: a18060800ux0155 | PartNumber: a18060800ux0155
Jaw Couplings Have Three Parts: Two Metallic Hubs And An Elastomer Insert Called An Element, But Commonly Called ""..
Wear Resistant ,High Hardness And Excellent Response.Super Elastic Torque Can Absorb Vibration, Appropriate A Large Torque Transmission..
Main Color: Silver Tone; Shaft Usage: 6.35Mm To 6.35Mm/0.25 Inch To 0.25 Inchtotal Size: 25 X 20Mm / 0.98 Inch X 0.79 Inch (L*D); Feature: Set Screwsthread Size: M3.
It Is Designed To Transmit Torque While Damping System Vibrations And Accommodating Misalignment To Protect Other Components From Damage..
Features
- General purpose power transmission coupling, also used in motion control applications and rotational power transmissions, is good replacement for your needs.
- It is designed to transmit torque while damping system vibrations and accommodating misalignment to protect other components from damage.
- Jaw couplings have three parts: two metallic hubs and an elastomer insert called an element, but commonly called .
- Main Color: Silver Tone; Shaft Usage: 6.35mm to 6.35mm/0.25 inch to 0.25 inchTotal Size: 25 x 20mm / 0.98 inch x 0.79 inch (L*D); Feature: Set screwsThread Size: M3
- Wear resistant ,high hardness and excellent response.Super elastic torque can absorb vibration, appropriate a large torque transmission.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell #25 Chain Idler Sprocket, 8mm Bore 1/4" Pitch 20 Tooth Sprocket Tensioner, C45 Carbon Steel 25 Roller Chain Sprocket with Bearing for ISO 04C Chain, 2Pcs
Asin: B0CCW573RQ
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Outside Diameter: 44mm / 1.73-inch; Bump Width: 5mm / 0.2-inch; Total Width: 13mm / 0.51-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search