JEGS Intake Manifold Gaskets | Fits Small Block Chevy Engines | 1.28 x 2.09 Port Size | 0.062 Thick | POZISEAL Around Critical Areas
Asin: B078WHPXGS | Ean: 0889944033899 | UPC: 889944033899
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Constructed From High-Quality Materials To Provide Strength And An Ultimate Seal.
Includes 6 Pieces To Seal The Intake To The Block And Cylinder Heads.
Features A Poziseal Around Critical Areas For Additional Protection.
Specifications: 1.28” X 2.09” Port, 0.062” Thickness.
Features
- FITS small block Chevrolet engines including 283, 305, 307, 327, 350, 383 (stroker), 400, and others based on the popular platform
- SPECIFICATIONS: 1.28 x 2.09 port, 0.062 thickness
- CONSTRUCTED FROM high-quality materials to provide strength and an ultimate seal
- FEATURES a POZISEAL around critical areas for additional protection
- INCLUDES 6 pieces to seal the intake to the block and cylinder heads
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.00 x 20.00 x 3.50 inches | Weight: 1.00 pounds
See On Amazon Similar To JEGS Intake Manifold Gaskets Fits
#1
JEGS Engine Gasket Kit | Fits Most 1968-1987 Ford 429-460 Big Block Except Boss, CJ, & SCJ | Intake Port Dimensions: 1.980 in. x 2.260 in.
Asin: B078WHZH4T | Ean: 0889944034919 | UPC: 889944034919
Made With High Quality Components And Assembly.
Contains Most Of The Gaskets You Need In One Convenient And Affordable Package.
Includes 2 Head Gaskets, 1 Timing Cover Seal, 2 Valve Cover Gaskets, 1 Timing Cover Gasket, 2 Intake Manifold Gaskets, 2 Oil Pan Gaskets, 2 Intake Manifold Seals, 2 Oil Pan Seals, 2 Exhaust Manifold Gaskets, 2 Water Pump Gaskets, 16 Valve Stem Seals, 2 Rear Main Seals, 1 Water Outlet Gasket, 2 Oil Pump Gaskets, 1 Drain Plug Washer & 1 Fuel Pump Gasket.
Intake Port Dimensions: 1.980 In. X 2.260 In..
Features
- FITS MOST 1968-1987 Ford 429-460 big block engines except Boss, CJ, & SCJ
- INTAKE PORT DIMENSIONS: 1.980 in. x 2.260 in.
- MADE WITH high quality components and assembly
- INCLUDES 2 head gaskets, 1 timing cover seal, 2 valve cover gaskets, 1 timing cover gasket, 2 intake manifold gaskets, 2 oil pan gaskets, 2 intake manifold seals, 2 oil pan seals, 2 exhaust manifold gaskets, 2 water pump gaskets, 16 valve stem seals, 2 rear main seals, 1 water outlet gasket, 2 oil pump gaskets, 1 drain plug washer & 1 fuel pump gasket
- CONTAINS MOST OF the gaskets you need in one convenient and affordable package
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 25.40 x 11.60 x 1.50 inches | Weight: 3.00 pounds
See On Amazon #2
JEGS Engine Gasket Kit | Fits 1970-1982 Ford 351C, 351M, and 400 | Includes Cylinder Head, Intake, Exhaust, Valve Cover, Fuel and Water Pump Gaskets, and More
Asin: B078WKCTVV | Ean: 0889944034704 | UPC: 889944034704
Includes Cylinder Head, Intake, Exhaust, Valve Cover, Fuel And Water Pump Gaskets, Plus Many More.
Premium Materials Supply Precise Fitment.
Precision-Made For Superior Sealing.
Contains All The Gaskets You Need In One Convenient And Affordable Package.
Features
- FITS 1970-1982 Ford 351C, 351M, And 400
- CONTAINS ALL THE GASKETS YOU NEED in one convenient and affordable package
- INCLUDES cylinder head, intake, exhaust, valve cover, fuel and water pump gaskets, plus many more
- PRECISION-MADE for superior sealing
- PREMIUM MATERIALS supply precise fitment
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 25.40 x 1.50 x 11.60 inches | Weight: 3.00 pounds
See On Amazon #3
JEGS Carburetor Heat Shield | Open Style | Made In USA | Fits Holley 4150/4160, Edelbrock, BG, Demon, Carter, And AFB | Includes 4 Gaskets, 2 Spacers, And 1 Heat Shield
Asin: B078WHM9MT | Ean: 0889944027485 | UPC: 889944027485
Constructed From Precision Laser Cut Aluminum.
Includes 4 Gaskets, 2 Spacers, And 1 Heat Shield.
Made In Usa With High Quality Components And Assembly.
Fits Holley 4150/4160, Edelbrock, Bg, Demon, Carter, And Afb Carbs.
Features
- HELPS eliminate fuel boiling and vapor lock caused by heat conducted to the carburetor through the intake manifold
- FITS Holley 4150/4160, Edelbrock, BG, Demon, Carter, and AFB carbs
- CONSTRUCTED FROM precision laser cut aluminum
- MADE IN USA with high quality components and assembly
- INCLUDES 4 gaskets, 2 spacers, and 1 heat shield
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.80 x 9.90 x 10.70 inches | Weight: 1.00 Pounds
See On Amazon #4
JEGS Intake Manifold Bolts | Fits Big Block Chevy and AMC V8 Engines | Includes (16) 3/8"-16 x 1.25" Hex Head Bolts and (16) Tight Clearance Washers
Asin: B078WJK6NB | Ean: 0889944089902 | UPC: 889944089902
Includes (16) 3/8"-16 X 1.25" Hex Head Bolts And (16) Tight Clearance Washers.
Please Verify Correct Bolt Length, These Bolts Are 1.25" Long And Work With Most Aftermarket Intake Manifolds.
Must Have Item When Doing An Intake Manifold Swap.
Constructed From Grade 8 Steel And Zinc-Dichromated Gold For Durability.
Features
- FITS big block Chevy and AMC V8 Engines
- CONSTRUCTED FROM Grade 8 steel and zinc-dichromated gold for durability
- INCLUDES (16) 3/8-16 x 1.25 hex head bolts and (16) tight clearance washers
- MUST HAVE ITEM when doing an intake manifold swap
- PLEASE VERIFY CORRECT BOLT LENGTH, these bolts are 1.25 long and work with most aftermarket intake manifolds
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.60 x 3.70 x 1.80 inches | Weight: 1.00 Pounds
See On Amazon #5
JEGS Engine Gasket Kit | Fits 1987-1995 Small Block Chevy Engines | 35 Pieces
Asin: B078WHF2R7 | Ean: 0889944034216 | UPC: 889944034216
Precision-Made Gaskets And Seals For Superior Sealing.
Includes 2 Center-Bolt Valve Cover Gaskets, 2 Fuel Pump Gaskets, 1 Exhaust Manifold Gasket Set, 2 Head Gaskets, 1 Drain Plug Gasket, 1 Oil Pan Gasket (Molded 1-Piece Design), 2 Intake Manifold Gaskets, 1 Tbi Intake Gasket Set, 2 - Intake Manifold Seals, 1 Distributor Gasket, 1 Timing Cover Gasket, 16 Valve Stem Seals, 1 Water Pump Gasket Set, 1 Rear Main Seal (1-Piece Design With Retainer Gasket), And 1 Thermostat Gasket.
Premium Materials Supply Precise Fitment.
Contains All The Gaskets You Need In One Convenient And Affordable Package.
Features
- FITS 1987-1995 small block Chevy engines such as 305, 350, 383 (stroker), 400, and others using the popular platform
- CONTAINS ALL THE GASKETS YOU NEED in one convenient and affordable package
- PRECISION-MADE gaskets and seals for superior sealing
- PREMIUM MATERIALS supply precise fitment
- INCLUDES 2 center-bolt valve cover gaskets, 2 fuel pump gaskets, 1 exhaust manifold gasket set, 2 head gaskets, 1 drain plug gasket, 1 oil pan gasket (molded 1-piece design), 2 intake manifold gaskets, 1 TBI intake gasket set, 2 - intake manifold seals, 1 distributor gasket, 1 timing cover gasket, 16 valve stem seals, 1 water pump gasket set, 1 rear main seal (1-piece design with retainer gasket), and 1 thermostat gasket
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.40 x 22.30 x 10.50 inches | Weight: 3.00 pounds
See On Amazon #6
JEGS 15480 5.0L EFI Intake Manifold Phenolic Heat Spacer
Asin: B078WJT8ZJ | Ean: 0889944027768 | UPC: 889944027768
1986-1993 O.E.M. Passenger Car Intake.
Stock Intakefits:.
Brand: JEGS | Manufacturer: JEGS
Dimensions: 3.70 x 16.70 x 9.00 inches | Weight: 2.00 pounds
See On Amazon #7
JEGS Intake Manifold Gaskets | Fits Ford 260-351W | 1.20 x 2.00 Port Size | 0.0625 Thick | POZISEAL Around Critical Areas
Asin: B078WK5P7K | Ean: 0889944034551 | UPC: 889944034551
Constructed From High-Quality Materials To Provide Strength And An Ultimate Seal.
Includes 9 Pieces To Seal The Intake To The Block And Cylinder Heads.
Features A Poziseal Around Critical Areas For Additional Protection.
Specifications: 1.20” X 2.00” Port, 0.0625” Thickness.
Features
- FITS small block Ford engines including 260, 289, 302, 347 (stroker), 351 Windsor, and others based on the popular platform
- SPECIFICATIONS: 1.20 x 2.00 port, 0.0625 thickness
- CONSTRUCTED FROM high-quality materials to provide strength and an ultimate seal
- FEATURES a POZISEAL around critical areas for additional protection
- INCLUDES 9 pieces to seal the intake to the block and cylinder heads
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.40 x 20.20 x 3.70 inches | Weight: 1.00 pounds
See On Amazon #8
JEGS Intake Manifold for Small Block Chevy 1955-1986 - Non-EGR Design - Idle - 5500 RPM Power Range - Cast Aluminum - Square Bore Carburetor Mounting Pad
Asin: B078WHX3L4 | Ean: 0889944054580 | UPC: 889944054580
Idle To 5500 Rpm Power Band For Street Or Mild Race Applications..
Fabricated From Cast Aluminum For Weight Savings And Improved Performance..
Fits Gm And Chevrolet Cylinder Heads From 1955 Through 1986..
Designed To Fit With Popular Aftermarket Square Bore 4150 Carburetors Including Edelbrock, Holley, Quickfuel, Proform, And More!.
Features
- Improve engine performance and horsepower with this higher flowing intake manifold compared to a stock cast iron intake.
- Designed to fit with popular aftermarket square bore 4150 carburetors including Edelbrock, Holley, Quickfuel, Proform, and more!
- Idle to 5500 RPM power band for street or mild race applications.
- Fits GM and Chevrolet cylinder heads from 1955 through 1986.
- Fabricated from cast aluminum for weight savings and improved performance.
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 5.60 x 21.70 x 12.00 inches | Weight: 15.00 pounds
See On Amazon #9
JEGS Intake Manifold Bolts | Fits Small Block Ford Engines | Includes (12) 5/16"-18 x 2" Hex Head Bolts and (12) 5/16" SAE Flat Washers
Asin: B078WJDMHM | Ean: 0889944089841 | UPC: 889944089841
Includes (12) 5/16"-18 X 2" Hex Head Bolts And (12) 5/16" Sae Flat Washers.
Hex Heads Properly Secure Intakes & Look Good.
Must Have Item When Doing An Intake Manifold Swap.
Constructed From Grade 5 Steel And Zinc-Plated For Durability.
Features
- FITS small block Ford engines such as 289, 302, 351 Windsor, and others based on the popular platform
- CONSTRUCTED FROM Grade 5 steel and zinc-plated for durability
- INCLUDES (12) 5/16-18 x 2 hex head bolts and (12) 5/16 SAE flat washers
- MUST HAVE ITEM when doing an intake manifold swap
- HEX HEADS properly secure intakes & look good
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.60 x 3.10 x 3.70 inches | Weight: 1.00 pounds
See On Amazon #10
JEGS Intake Manifold Install Kit | for Small Block Chevy | Includes Intake Manifold Gasket Set, Water Neck, Heater Hose Fitting, Pipe Plugs, Distributor Hold Down, Return Spring Bracket, Hardware
Asin: B078WJ99SZ | Ean: 0889944051534 | UPC: 889944051534
Made From High Quality Components And Assembly.
Note: The Intake Gaskets In This Kit Do Not Have The Heat Riser Port Provision. These Are Recommended For Intakes That Do Not Have A Heat Riser Crossover.
Includes 2 Intake Gaskets & 2 End Seals, 12 Intake Bolts, Distributor Gasket, Chrome Distributor Hold Down With Bolt , 2 Of Each 1/8 “ Npt, 1/4 “ Npt, 3/8 “ Npt, & 1/2 “ Npt Pipe Plugs, Chrome Thermostat Housing With O-Ring Seal & 2 Bolts, Heater Hose Fitting, Chrome Throttle Spring Bracket, Carburetor Stud Kit With 4 Studs, 4 Nuts, And 4 Flat Washers.
Fits 1955-1985 Small Block Chevy Engines Including 283, 305, 307, 327, 350, 383 (Stroker), 400, And Others Based On The Popular Platform.
Features
- CONTAINS EVERYTHING YOU NEED to compliment your intake manifold installation
- FITS 1955-1985 small block Chevy engines including 283, 305, 307, 327, 350, 383 (stroker), 400, and others based on the popular platform
- MADE FROM high quality components and assembly
- INCLUDES 2 intake gaskets & 2 end seals, 12 intake bolts, distributor gasket, chrome distributor hold down with bolt , 2 of each 1/8 npt, 1/4 npt, 3/8 npt, & 1/2 npt pipe plugs, chrome thermostat housing with o-ring seal & 2 bolts, heater hose fitting, chrome throttle spring bracket, carburetor stud kit with 4 studs, 4 nuts, and 4 flat washers
- NOTE: the intake gaskets in this kit do not have the heat riser port provision. these are recommended for intakes that do not have a heat riser crossover
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 4.70 x 22.30 x 10.50 Inches | Weight: 4.00 Pounds
See On Amazon #11
JEGS Intake Manifold Bolts | Fits Small Block Chevy (Except Vortec), All Mopar (except Hemi), And AMC V8 Engines | Includes (12) 3/8"-16 x 1" Hex Head Bolts And (12) Tight Clearance Washers
Asin: B078WHZB5G | Ean: 0889944089865 | UPC: 889944089865
Includes (12) 3/8"-16 X 1" Hex Head Bolts And (12) Tight Clearance Washers.
Please Verify Correct Bolt Length, These Bolts Are 1" Long And Work With Most Aftermarket Intake Manifolds. For Vortec Intake Manifolds Use Part Number 555-83201, Available Separately.
Must Have Item When Doing An Intake Manifold Swap.
Constructed From Grade 5 Steel And Zinc-Dichromated Gold For Durability.
Features
- FITS small block Chevy. all Mopar (except Hemi), and AMC V8 Engines
- CONSTRUCTED FROM Grade 5 steel and zinc-dichromated gold for durability
- INCLUDES (12) 3/8-16 x 1 hex head bolts and (12) tight clearance washers
- MUST HAVE ITEM when doing an intake manifold swap
- PLEASE VERIFY CORRECT BOLT LENGTH, these bolts are 1 long and work with most aftermarket intake manifolds. For Vortec intake manifolds use part number 555-83201, available separately
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.60 x 4.10 x 3.30 inches | Weight: 1.00 pounds
See On Amazon #12
JEGS Intake Manifold Gaskets | Fits Big Block Chevy Engines | 1.80 x 2.05 Port Size | 0.0625 Thick
Asin: B078WJ95CC | Ean: 0889944034315 | UPC: 889944034315
Constructed From High-Quality Materials To Provide Strength And An Ultimate Seal.
Made With High Quality Components And Assembly.
Includes 7 Pieces To Seal The Intake To The Block And Cylinder Heads.
Specifications: 1.80” X 2.05” Port, 0.0625” Thickness.
Features
- FITS big block Chevrolet engines including 396, 402, 427, 454, 502, and others based on the popular platform
- SPECIFICATIONS: 1.80 x 2.05 port, 0.0625 thickness
- CONSTRUCTED FROM high-quality materials to provide strength and an ultimate seal
- INCLUDES 7 pieces to seal the intake to the block and cylinder heads
- MADE WITH high quality components and assembly
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.60 x 23.10 x 5.70 inches | Weight: 1.00 pounds
See On Amazon #13
JEGS Fabricated Intake Manifold | Fits GM LS1, LS2, LS6 Engines | Black Aluminum | ACCEPTS 92mm/102mm Throttle Bodies | 2200-6800 RPM Range | Includes Fuel Rail Kit, Intake Seals, Hardware
Asin: B07B3THCMQ | Ean: 0889944054719 | UPC: 889944054719
Includes Fuel Rail Kit, Intake Seals, Hardware, Ls3 Style Map Sensor Port, And Vacuum Port Fittings.
Fabricated From Aluminum And Finished In Black.
2200-6800 Rpm Range For Most Street And Race Applications.
Accepts 92Mm Or 102Mm Throttle Bodies.
Features
- FITS GM LS1, LS2, and LS6 cylinder heads with cathedral intake ports
- ACCEPTS 92mm or 102mm throttle bodies
- INCLUDES fuel rail kit, intake seals, hardware, LS3 style MAP sensor port, and vacuum port fittings
- 2200-6800 RPM RANGE for most street and race applications
- FABRICATED FROM ALUMINUM and finished in black
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 12.10 x 20.60 x 15.10 inches | Weight: 18.00 pounds
See On Amazon #14
JEGS Intake Manifold for 1969-1996 Small Block Ford 351 Windsor - Hi-Rise, Single Plane, Open Plenum - Square Bore 4150/4160 Flange - 5.68 Carb Pad Height - 3500-8000 RPM
Asin: B08FF41DC2 | Ean: 0889944108023 | UPC: 889944108023
Intake Operating Rpm Range: 3500-8000 Rpms..
For Square Bore 4150/4160 Carburetors Such As Edelbrock, Holley, Proform, Quick Fuel, Demon, And Others..
Specifications: Aluminum, High Rise, Single Plane, Open Plenum..
Manifold Carburetor Pad Height: 5.68 Inches..
Features
- Fits 1969-1996 small block Ford 351 Windsor engines.
- Manifold Carburetor Pad Height: 5.68 inches.
- Intake Operating Rpm Range: 3500-8000 rpms.
- Specifications: aluminum, high rise, single plane, open plenum.
- For square bore 4150/4160 carburetors such as Edelbrock, Holley, Proform, Quick Fuel, Demon, and others.
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 23.80 x 11.60 x 6.50 inches | Weight: 18.00 pounds
See On Amazon #15
JEGS Engine Gasket Kit | Fits 1985-1990 Big Block Chevy Engines | Includes 43 Pieces
Asin: B078WHNNFJ | Ean: 0889944034513 | UPC: 889944034513
Features Premium Quality Components Including 2 - Fuel Pump Gasket (Plate), 1 - Drain Plug Washer, 2 - Head Gasket, 2 - Intake Manifold Gasket, 2 - Rubber End Seal, 2 - Exhaust Manifold Gasket, 1 - Distributor Mating Gasket, 1 - Oil Pan Rails, 2 - Rubber End Seal, 1 - Oil Pump Gasket, 1 - 2-Piece Rear Main Seal, 16 - Valve Stem Seals, 1 - Timing Cover Gasket, 1 - Timing Cover Seal, 2 - Valve Cover Gaskets, 2 - Water Outlet Gaskets, 1 - Thermostat Elbow Gaskets, And 3 - Water Pump Gaskets (Inlet).
Premium Materials Supply Precise Fitment.
Precision-Made Gaskets And Seals For Superior Sealing.
Contains All The Gaskets You Need In One Convenient And Affordable Package.
Features
- FITS 1985-1990 big block Chevy engines such as 454 cubic inch / 7.4 liter and others using the popular platform
- CONTAINS ALL THE GASKETS YOU NEED in one convenient and affordable package
- FEATURES premium quality components including 2 - fuel pump gasket (plate), 1 - drain plug washer, 2 - head gasket, 2 - intake manifold gasket, 2 - rubber end seal, 2 - exhaust manifold gasket, 1 - distributor mating gasket, 1 - oil pan rails, 2 - rubber end seal, 1 - oil pump gasket, 1 - 2-piece rear main seal, 16 - valve stem seals, 1 - timing cover gasket, 1 - timing cover seal, 2 - valve cover gaskets, 2 - water outlet gaskets, 1 - thermostat elbow gaskets, and 3 - water pump gaskets (inlet)
- PRECISION-MADE gaskets and seals for superior sealing
- PREMIUM MATERIALS supply precise fitment
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 25.40 x 11.20 x 1.40 inches | Weight: 3.00 pounds
See On Amazon #16
JEGS Small Block Chevy 1955-1986 Intake Manifold | High Rise | 3000-7500 RPM Power Range | Cast Aluminum | Square Bore 4150/4160 Mounting Pad | Single Plane | 6.060 Carb Pad Height
Asin: B08FF3YFM8 | Ean: 0889944107927 | UPC: 889944107927
Fits Gm And Chevrolet Cylinder Heads From 1955 Through 1986.
Fabricated From Cast Aluminum For Weight Savings And Improved Performance.
3000 To 7500 Rpm Power Band For Street Or Mild Race Applications.
Designed To Fit With Popular Aftermarket Square Bore 4150 And 4160 Carburetors Including Edelbrock, Holley, Quickfuel, Proform, And More.
Features
- IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake
- DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 AND 4160 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more
- FITS GM AND CHEVROLET CYLINDER HEADS from 1955 through 1986
- 3000 TO 7500 RPM POWER BAND for street or mild race applications
- FABRICATED FROM CAST ALUMINUM for weight savings and improved performance
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 7.80 x 23.10 x 12.40 inches | Weight: 17.00 pounds
See On Amazon #17
JEGS Intake Manifold Gasket Set | for 1996-2002 Small Block Chevy V8 305 and 350 Vortec Engines | Port Size: 1.31 x 2.25 | Thickness: .120 | POZISEAL | Includes Upper & Lower Set
Asin: B07DP3X61Z | Ean: 0889944095392 | UPC: 889944095392
Specifications: Port Size: 1.31 “ X 2.25 “, Thickness: .120 “.
Constructed From High-Quality Materials To Provide Strength And An Ultimate Seal, Ensuring Leak-Free Performance For Your Manifold.
Features A Poziseal Around Critical Areas For Additional Protection.
Includes Upper And Lower Set.
Features
- FOR 1996-2002 small block Chevy V8 305 and 350 Vortec engines
- INCLUDES upper and lower set
- SPECIFICATIONS: port size: 1.31 x 2.25 , thickness: .120
- FEATURES a POZISEAL around critical areas for additional protection
- CONSTRUCTED FROM high-quality materials to provide strength and an ultimate seal, ensuring leak-free performance for your manifold
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.30 x 21.30 x 6.60 inches | Weight: 1.00 pounds
See On Amazon #18
JEGS Intake Manifold Gaskets | Fits Small Block Chevy Engines 1985-1989 5.0/5.7 Liter TPI & 1996-2002 5.7 Liter L31 Vortec | Tapered x 2.100 High Port Size | 0.120 Thick | Made in USA
Asin: B078WHZH4M | Ean: 0889944033912 | UPC: 889944033912
Features Poziseal Around Critical Areas For Additional Protection.
Made In Usa With High Quality Components And Assembly.
Includes 5 Pieces To Seal The Intake To The Block And Cylinder Heads.
Specifications: Tapered X 2.100” High Port Size, 0.120” Thickness.
Features
- FITS small block Chevy engines 1985-1989 5.0/5.7 liter TPI & 1996-2002 5.7 liter L31 Vortec
- SPECIFICATIONS: tapered x 2.100 high port size, 0.120 thickness
- FEATURES POZISEAL around critical areas for additional protection
- INCLUDES 5 pieces to seal the intake to the block and cylinder heads
- MADE IN USA with high quality components and assembly
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.01 x 23.10 x 6.00 inches | Weight: 1.00 pounds
See On Amazon #19
JEGS Intake Manifold Seals | Fits GM/Chevrolet LS1/LS2/LS6 Engines | Made In USA | Includes 8 Seals To Service 1 Intake Manifold | Replaces GM Part Number 12533587
Asin: B019XE1LF6 | Ean: 0889944035237 | UPC: 889944035237
Made In Usa With High Quality Components And Assembly.
Must Have Kit When Repairing, Replacing, Or Upgrading Your Vehicle’S Intake Manifold.
Includes 8 Seals To Service One Intake Manifold.
Replaces Gm Part Number 12533587.
Features
- FITS GM and Chevy LS1/LS2/LS6 engines such as 4.8, 5.3, 5.7, 6.0 and others based on the popular platform
- REPLACES GM part number 12533587
- MADE IN USA with high quality components and assembly
- INCLUDES 8 seals to service one intake manifold
- MUST HAVE KIT when repairing, replacing, or upgrading your vehicle s intake manifold
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.00 x 10.00 x 7.00 inches | Weight: 1.00 pounds
See On Amazon
Looking For Something Else?
Search