JEGS Driveshaft Spacer | Fits 1979-2004 Ford Mustang LX/GT | 11/16 Thick | Made In USA | Compatible With 8.8 Solid Axles (Non-Independent Rear Suspension) | Grade 12.9 Hardware | Aluminum
Asin: B078WJ8GT2 | Ean: 0889944062325 | UPC: 889944062325
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Reduces The Risk Of Slip Yoke And U-Joint Failure.
For Use With 8.8" Solid Axle (Non-Irs) Applications.
Eliminates The Cost And Time Involved In Ordering A Custom Length Driveshaft.
Maintains Proper Tail Shaft Engagement.
Features
- DESIGNED TO ALLOW THE USE OF a stock length driveshaft in 1979-04 models when performing a transmission swap from a T-5 or AOD to a Tremec or C-4
- MAINTAINS proper tail shaft engagement
- REDUCES THE RISK OF slip yoke and u-joint failure
- ELIMINATES THE COST AND TIME INVOLVED in ordering a custom length driveshaft
- FOR USE WITH 8.8 solid axle (non-IRS) applications
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.60 x 4.90 x 4.10 inches | Weight: 2.00 pounds
See On Amazon Similar To JEGS Driveshaft Spacer Fits 19792004
#1
JEGS 601256K Flywheel & Bolt Kit Fits 1986-1992 Small Block Chevy 305 5.0L & 350
Asin: B096BMS7ML
Includes:.
Flywheel Attaching Bolts Kit....
168-Tooth....
Externally....
Features
- Fits 1986-1992 Small Block Chevy 305 5.0L & 350...
- Externally...
- Includes:
- 168-Tooth...
- Flywheel Attaching Bolts Kit...
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Weight: 5.00 pounds
See On Amazon #2
JEGS Heavy-Duty Aluminum Driveshaft | 28-Spline | Slip Yoke | Fits 1979-95 Ford Mustang/Mercury Capri | For 7.5 and 8.8 Axles | Made In USA
Asin: B078WJVSP1 | Ean: 0889944062387 | UPC: 889944062387
Compatible With 7.5” And 8.8” Axles.
Balanced From The Factory, Ready To Install.
Specifications: 3.5” Diameter, 0.114” Wall, 45.5” Long (Measured From Centerline Of U-Joints On Both Ends), Front U-Joint Is 1330 And Rear U-Joint Is 1310/1330 Conversion Joint.
Made In Usa With High Quality Parts And Assembly.
Features
- FITS 1979-1995 Ford Mustang and Mercury Capri with T-5/SROD/C-4/AOD and Tremec Transmissions with 28-spline slip yoke connection
- MADE IN USA with high quality parts and assembly
- COMPATIBLE WITH 7.5 and 8.8 axles
- SPECIFICATIONS: 3.5 diameter, 0.114 wall, 45.5 long (measured from centerline of u-joints on both ends), front u-joint is 1330 and rear u-joint is 1310/1330 conversion joint
- BALANCED FROM THE FACTORY, ready to install
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 5.50 x 55.00 x 5.50 inches | Weight: 16.00 pounds
See On Amazon #3
JEGS Flywheel | For 1955-1985 Small Block Chevy | Internal Balance | 153 Tooth | Fits 2-Piece Rear Main Seal | Non-SFI | 12.75 Diameter
Asin: B078WHZ8HR | Ean: 0889944059783 | UPC: 889944059783
153 Teeth To Fit Most Applications.
Non-Sfi Approved To Be Used In Street Applications.
Specifications: 12.75” Diameter.
Internally Balanced To Oem Engine Specs.
Features
- FITS 1955-1985 small block chevrolet engines with 2-piece rear main seal such as 283, 307, 327, 350, 383 stroker, 400, and others based on the popular platform
- INTERNALLY BALANCED to OEM engine specs
- 153 TEETH to fit most applications
- SPECIFICATIONS: 12.75 diameter
- NON-SFI APPROVED to be used in street applications
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 2.00 x 14.40 x 14.60 inches | Weight: 18.00 pounds
See On Amazon #4
JEGS Chevy 6-Bolt Flywheel/Flexplate Shim | 0.030" Thick | Steel | Made In USA | Fits 2-Piece Rear Main Seal Crankshafts, Mid-Mount Motor Plates, And Rear Motor Plates
Asin: B078WJD5YY | Ean: 0889944060147 | UPC: 889944060147
Made In Usa With High Quality Components And Assembly.
One Per Package With Other Components Available Separately.
Laser Cut From 0.030" Cold Rolled Steel For Strength And Precision Fit With Chevy 6-Bolt Crank Flanges.
Provides The Correct Alignment And Engagement Of The Torque Converter To Input Shaft Or Pilot Bushing To Input Shaft By Moving The Flywheel/Flexplate Rearward In The Chassis.
Features
- DESIGNED FOR USE WITH any mid-mount or rear motor plate
- PROVIDES THE CORRECT ALIGNMENT AND ENGAGEMENT of the torque converter to input shaft or pilot bushing to input shaft by moving the flywheel/flexplate rearward in the chassis
- MADE IN USA with high quality components and assembly
- LASER CUT FROM 0.030 cold rolled steel for strength and precision fit with Chevy 6-bolt crank flanges
- ONE PER PACKAGE with other components available separately
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.30 x 4.80 x 4.80 inches | Weight: 1.00 pounds
See On Amazon #5
JEGS Flywheel | For 1967-1985 Small Block Chevy | Internal Balance | 168 Tooth | Fits 2-Piece Rear Main Seal | Non-SFI | 14.125 Diameter
Asin: B078WHRTCZ | Ean: 0889944059790 | UPC: 889944059790
168 Teeth To Fit Most Applications.
Non-Sfi Approved To Be Used In Street Applications.
Specifications: 14.125” Diameter.
Internally Balanced To Oem Engine Specs.
Features
- FITS 1967-1985 small block chevrolet engines with 2-piece rear main seal such as 283, 307, 327, 350, 383 stroker, 400, and others based on the popular platform
- INTERNALLY BALANCED to OEM engine specs
- 168 TEETH to fit most applications
- SPECIFICATIONS: 14.125 diameter
- NON-SFI APPROVED to be used in street applications
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.70 x 14.40 x 14.60 Inches | Weight: 30.00 pounds
See On Amazon #6
JEGS GM LS Flexplate, Crankshaft Spacer & Bolt Kit | 168-Tooth | Internally Balanced | 6-Bolt Crank Pattern | 14.13 Diameter | SFI 29.1 Rated | Includes Flexplate, Spacer, And Spacer Bolts
Asin: B07DL9TLD9 | Ean: 0889944103196 | UPC: 889944103196
Flexplate Made From Chromoly Steel With A Double-Welded Ring Gear To Prevent Separation In High-Rpm Engines.
Will Not Fit 4L80e Transmissions And 1999-2000 6.0 Liter Engines With Long Snout Crank, Correct Flexplates For This Engine Available Separately.
Includes Flexplate, Crankshaft Spacer, And Spacer Bolts.
Spacer Fills The Gap Created From The Shorter Ls Small Block Crankshaft Flange In Relationship To The Older Transmissions Such As Th350, Th400, 700-R4 And Others.
Features
- FOR USE WHEN swapping a Chevy/GM LS-series engine to an automatic transmission built before 1997 with the appropriate torque converter
- SPACER FILLS THE GAP created from the shorter LS small block crankshaft flange in relationship to the older transmissions such as TH350, TH400, 700-R4 and others
- FLEXPLATE MADE FROM CHROMOLY STEEL with a double-welded ring gear to prevent separation in high-RPM engines
- INCLUDES flexplate, crankshaft spacer, and spacer bolts
- WILL NOT FIT 4L80E transmissions and 1999-2000 6.0 liter engines with long snout crank, correct flexplates for this engine available separately
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Weight: 5.00 pounds
See On Amazon #7
JEGS GM LS Crankshaft Spacer | Required When Used With Automatic Transmission Built Before 1997 | Ensures Proper Clearance Between Crankshaft and Converter
Asin: B078WJK4FZ | Ean: 0889944059332 | UPC: 889944059332
Ensures Proper Clearance Between Crankshaft And Converter.
Will Not Fit 4L80e Transmission Or 1999-2000 6.0 Liter Engine With Long Snout Crankshaft.
Crankshaft Bolts Available Separately To Properly Mount Adapter.
Adapts To The Following Transmissions: Pre-1997 Th350, Th400, 700-R4, 4L60, 4L60e, 4L85e.
Features
- FITS THE FOLLOWING ENGINES: GM LS1, LS2, LS3, LS6, LS7, L92
- ADAPTS TO THE FOLLOWING TRANSMISSIONS: pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E
- ENSURES PROPER CLEARANCE between crankshaft and converter
- CRANKSHAFT BOLTS available separately to properly mount adapter
- WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.80 x 3.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #8
JEGS Flywheel | For 1986-1992 Small Block Chevy Engines | External Balance | 153 Tooth | Fits 1-Piece Rear Main Seal | Non-SFI | 12.75 Diameter | For 10.4 Clutch
Asin: B078WHSJBQ | Ean: 0889944059813 | UPC: 889944059813
153 Teeth To Fit Most Applications.
Non-Sfi Approved To Be Only Used In Street Applications.
Specifications: 12.75” Diameter.
Externally Balanced To Oem Engine Specs.
Features
- FITS 1986-1992 small block chevrolet engines with 1-piece rear main seal such as 305, 350, and others based on the popular platform
- EXTERNALLY BALANCED to OEM engine specs
- 153 TEETH to fit most applications
- SPECIFICATIONS: 12.75 diameter
- NON-SFI APPROVED to be only used in street applications
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.70 x 14.30 x 14.40 inches | Weight: 18.00 pounds
See On Amazon #9
JEGS Steering Shaft Support Bearing | 0.757 ID | 3/4"-16 RH Thread | Steel with Zinc Coating | Includes Two 3/4"-16 RH jam Nuts
Asin: B019XDDAIS | Ean: 0889944063155 | UPC: 889944063155
Oversize Bearing (0.757" Id) Eliminates The Need To Do Any Special Machining On The Steering Shaft Tube & Makes Is Simple To Create A Custom Steering Shaft For Your Project.
Includes Two 3/4"-16 Rh Jam Nuts.
Specifications: 3/4"-16 Rh Thread With 0.757” Id.
Steel With Zinc Coating For Strength, Great Looks, And Long Life.
Features
- SLIPS OVER steering shaftS made from 3/4" tubing
- STEEL WITH ZINC COATING for strength, great looks, and long life
- OVERSIZE BEARING (0.757 ID) eliminates the need to do any special machining on the steering shaft tube & makes is simple to create a custom steering shaft for your project
- SPECIFICATIONS: 3/4-16 RH Thread with 0.757 ID
- INCLUDES two 3/4-16 RH jam nuts
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.80 x 2.90 x 3.80 inches | Weight: 1.00 pounds
See On Amazon #10
JEGS Automatic Transmission Input Shaft | Fits GM Powerglide | Made In USA | Rated to 1200 HP | 1.76 Carrier | Turbo Spline | 300M Steel | 12.875 Long
Asin: B071DQ23J5 | Ean: 0889944061113 | UPC: 889944061113
Turbo Splines To Allow Th350 Torque Converters To Work With The Pg Transmission.
Made From 4340M (Also Known As 300M) Alloy Steel, Which Has The Ability To Be Hardened To A Greater Thickness Compared To Other Steel Blends, Resulting In Its Use In Aerospace And Other Areas Where High-Strength Components Are Required.
Made In Usa With High Quality Components And Assembly.
Rated To 1200 Horsepower For High Performance Race Applications.
Features
- FITS Chevy Powerglide Transmissions with 1.76 carrier
- RATED TO 1200 HORSEPOWER for high performance race applications
- TURBO SPLINES to allow TH350 torque converters to work with the PG transmission
- MADE IN USA with high quality components and assembly
- MADE FROM 4340M (also known as 300M) alloy steel, which has the ability to be hardened to a greater thickness compared to other steel blends, resulting in its use in aerospace and other areas where high-strength components are required
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.60 x 18.20 x 1.60 inches | Weight: 3.00 Pounds
See On Amazon #11
JEGS 15450 1/2" Spacer
Asin: B078WHTG46 | Ean: 0889944027676 | UPC: 889944027676
Made In The Usa.
4150 Carburetors.
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.00 x 10.00 x 9.00 inches | Weight: 1.00 pounds
See On Amazon #12
JEGS Torque Box Kit | Fits 1979-2004 Ford Mustang | Made In USA | Includes Upper Reinforcement, Lower Reinforcement, And Hardware | Heavy Gauge Steel
Asin: B078WJYBB3 | Ean: 0889944062097 | UPC: 889944062097
Includes Upper Reinforcement, Lower Reinforcement, And Hardware.
Made In Usa With High Quality Components And Assembly.
Can Be Welded Or Bolted On.
Fits 1979-2004 Ford Mustang.
Features
- PROVIDES REINFORCEMENT FOR weak factory upper and lower torque boxes
- FITS 1979-2004 Ford Mustang
- INCLUDES upper reinforcement, lower reinforcement, and hardware
- CAN BE welded or bolted on
- MADE IN USA with high quality components and assembly
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 5.60 x 10.30 x 10.30 inches | Weight: 10.00 pounds
See On Amazon #13
JEGS Complete Differential Installation Kit | Fits GM 7.5 10-Bolt Applications From 1982-1998 Cars And Trucks With 3.125 Head Bearing
Asin: B078WJL2PJ | Ean: 0889944064282 | UPC: 889944064282
A Must Have When Doing A Rebuild Or Swapping Out The Ring And Pinion Or Differential.
Other Kits Available For Differentials Separately.
For The Following 1982-1998 Cars And Trucks: Buick Electra, Lesabre, Regal, Chevrolet Astro, Camaro, Caprice, El Camino, Impala, Monte Carlo, S-10, Gmc Safari, Sonoma, Syclone, Oldsmobile 98, Bravada, Custom Cruiser, Cutlass (Including Calais, Cruiser,Salon And Supreme), Delta 88, Pontiac Bonneville, Firebird, Grand Prix, Parisienne, And Safari.
Includes Crush Sleeve, Pinion & Carrier Shims, Carrier Bearings, Cover Gasket, Head Bearings, Pinion Nut, Pinion Seal, Tail Bearing, Ring Gear Bolts, Thread Locker, And Marking Compound With Brush.
Features
- FITS GM 7.5 10-bolt applications with 3.125 inch head bearing
- INCLUDES crush sleeve, pinion & carrier shims, carrier bearings, cover gasket, head bearings, pinion nut, pinion seal, tail bearing, ring gear bolts, thread locker, and marking compound with brush
- A MUST HAVE when doing a rebuild or swapping out the ring and pinion or differential
- FOR THE FOLLOWING 1982-1998 CARS AND TRUCKS: Buick Electra, Lesabre, Regal, Chevrolet Astro, Camaro, Caprice, El Camino, Impala, Monte Carlo, S-10, GMC Safari, Sonoma, Syclone, Oldsmobile 98, Bravada, Custom Cruiser, Cutlass (including Calais, Cruiser,Salon and Supreme), Delta 88, Pontiac Bonneville, Firebird, Grand Prix, Parisienne, and Safari
- OTHER KITS AVAILABLE for differentials separately
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.80 x 11.10 x 11.90 inches | Weight: 6.00 pounds
See On Amazon #14
JEGS 15451 1" Spacer
Asin: B078WJG6H6 | Ean: 0889944027683 | UPC: 889944027683
Made In The Usa.
4150 Carburetors.
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.10 x 8.50 x 9.40 inches | Weight: 1.00 pounds
See On Amazon #15
JEGS 82504 Torque Converter Bolts
Asin: B078WHK316 | Ean: 0889944089247 | UPC: 889944089247
(3) 7/16"-20 X 1-1/2" Grade 8 Bolts.
(3) 7/16" Stainless Steel Washers.
(3) 7/16"-20 Grade 8 Hex Nuts.
3/Pkgincludes:.
Features
- Fits 8" Race Converters
- 3/pkgIncludes:
- (3) 7/16-20 x 1-1/2 Grade 8 Bolts
- (3) 7/16-20 Grade 8 Hex Nuts
- (3) 7/16 Stainless Steel Washers
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 0.75 x 2.50 x 2.10 inches | Weight: 1.00 pounds
See On Amazon #16
JEGS 60642 HD Aluminum Driveshaft
Asin: B078WH47YD | Ean: 0889944062394 | UPC: 889944062394
1996-04 Mustang Gt 4.6L 2V (W/Manual Transmission).
Does Not Fit 1999-04 Mustang Cobra 4.6L 4V.
1996-98 Mustang Cobra 4.6L 4V (W/Manual Transmission).
Made In The Usafits:.
Features
- 31-Spline Slip Yoke
- Made in the USAFits:
- 1996-04 Mustang GT 4.6L 2V (w/Manual Transmission)
- 1996-98 Mustang Cobra 4.6L 4V (w/Manual Transmission)
- Does Not Fit 1999-04 Mustang Cobra 4.6L 4V
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 6.00 x 55.00 x 5.00 inches | Weight: 16.00 pounds
See On Amazon
Looking For Something Else?
Search