CR-10S mk2a 300x300 24V aluminum heated bed PCB Heatbed Platform for 300mm heated DIY 3DPrinter 250W+ Wiring
Asin: B078Z9XJMK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3. Heated Bed 300X300 Please Assemble With M4 Screws. It Can Be Heated To 100 Degrees Celsius In 10 Minutes. Solder Ntc 3950 Thermistor. Use A 1 Meter Long Wire..
5. Product Service: This Type Of Hot Bed Provides Lifetime Free Technical Support And Is Tested 48 Hours Before Shipment. We Promise That The Hot Bed Platform Will Not Get Hot During Normal Use. You Can Replace The Same Mk3 Hot Bed Platform For Free For One Year. It Also Offers 24-Hour Online Customer Service..
4. 3D Printer Kit Working Mode: Suitable For All Cr-10 3D Printer Platforms To Warm Up..
2. Pcb Heatbed Working Range: 24V 240W Power Supply Continuous Heating Will Not Cause Large Surges, Making Your 3D Printer Power Supply Longer And More Stable. It Does Not Cause The Power Supply To Trip And The Machine To Run Out Of Power. Please Use A Printer With A Power Supply Of At Least 300W..
Features
- 1. pcb heated bed Working parameters: 24V voltage 240W 3D heating platform, smoothness is less than 0.3MM. It makes the print model more aesthetic and avoids warping of the edges of the model.
- 2. pcb heatbed Working range: 24V 240W power supply continuous heating will not cause large surges, making your 3D printer power supply longer and more stable. It does not cause the power supply to trip and the machine to run out of power. Please use a printer with a power supply of at least 300W.
- 3. heated bed 300x300 Please assemble with M4 screws. It can be heated to 100 degrees Celsius in 10 minutes. Solder NTC 3950 thermistor. Use a 1 meter long wire.
- 4. 3d printer kit Working mode: Suitable for all CR-10 3D printer platforms to warm up.
- 5. Product Service: This type of hot bed provides lifetime free technical support and is tested 48 hours before shipment. We promise that the hot bed platform will not get hot during normal use. You can replace the same MK3 hot bed platform for free for one year. It also offers 24-hour online customer service.
- See more on Amazon...
Brand: KREATEIT | Manufacturer: Shenzhen Huachuang 3D Technology Co.,Ltd
Dimensions: 0.11 x 12.20 x 12.20 inches
See On Amazon Similar To CR10S mk2a 300x300 24V aluminum
#1
HICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality CR-10 CR-10S CR-10 Mini,Tevo Tornado 3D Printer
Asin: B07DFG5DDD | Model: JCT-GEIMAI | PartNumber: JCT-GEIMAI
3 Fit For: Creality Cr-10, Cr-10S, Cr-10 Mini And Similar 3D Printers.
5 Extruder Kit : Cr-10 Hotend With Thermistor, Heater Carriage, And Two Cooling Fans..
4 Stable Material For Cr-10 Hotend Assembly : Aluminum, Stainless Steel, Brass And Mk8 Nozzle.
2 Durable Quality: Plug And Play Cr-10 Hotend Assembly With High Quality..
Features
- 1 Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work.
- 2 Durable Quality: plug and play cr-10 hotend assembly with high quality.
- 3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers
- 4 Stable Material for cr-10 hotend assembly : Aluminum, stainless steel, brass and MK8 nozzle
- 5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans.
- See more on Amazon...
Brand: HICTOP | Manufacturer: HIC Technology Co., Ltd
Dimensions: 2.99 x 5.50 x 4.69 Inches | Weight: 0.55 pounds
See On Amazon #2
Micro Swiss NG Direct Drive Extruder for Creality CR-10 V2 / V3
Asin: B0C24LMZQ6 | Model: M3206 | PartNumber: M3206 | Ean: 0850041631059 | UPC: 850041631059
Adaptable To Wide Range Of 3D Printers.
Made In Usa By Micro Swiss.
Integrated With A Micro Swiss All Metal Hotend.
3:1 Gear Ratio.
Features
- Fits: CR-10 V2 / CR-10 V3
- 3:1 Gear ratio
- Adaptable to wide range of 3D Printers
- Integrated with a Micro Swiss All Metal Hotend
- Made in USA by Micro Swiss
- See more on Amazon...
Brand: Micro-Swiss | Manufacturer: Micro Swiss
See On Amazon #3
HICTOP CR-10S pro hotend CR-10s pro V2 hotend with Aluminum Heating Block 0.4mm Nozzle MK8 Black Silicone Sleeve fits 1.75 mm Filament
Asin: B093FH41GG | Model: extruder kit-ender 3 | PartNumber: extruder kit-ender 3 | Ean: 0649910022162 | UPC: 649910022162
3 Cr-10S Pro Hotend With 1M 100K Thermistor And 24V 40W Heating Carriage, 0.6M Blue High Temperature Resistant Teflon Tube.
5 Material For The Cr-10S Pro Hotend: Aluminum & Stainless Steel & Brass.
4 The Working Temperature For Cr-10S V2 Hot End Assembly: -20-260℃.
2 Nozzle Size For The Cr-10S Pro Hotend: 0.4Mm, Suitable For 1.75 Mm Filament.
Features
- 1 Compatible with Creality CR-10 max, Cr-10s pro and Cr-10s pro V2 3d printer
- 2 Nozzle size for the CR-10S pro hotend: 0.4mm, suitable for 1.75 mm filament
- 3 CR-10S pro hotend with 1m 100K thermistor and 24V 40W heating carriage, 0.6m blue high temperature resistant Teflon tube
- 4 The working temperature for cr-10s v2 hot end assembly: -20-260
- 5 Material for the CR-10S pro hotend: Aluminum & Stainless Steel & Brass
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
Dimensions: 0.39 x 5.90 x 4.29 inches | Weight: 0.22 pounds
See On Amazon #4
Creality Original Extruder Assembled MK8 Hotend Kit Full Set Upgrade with Low Friction Capricorn Tubing for 3D Printer CR-7 CR-8 CR-10S S4 S5
Asin: B07WSQJ41K | Model: ENO-CR10-Full-Hotend-Bluetube | PartNumber: ENO-CR10-Full-Hotend-Bluetube | Ean: 0705300791510 | UPC: 705300791510
Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Capricorn Original Ptfe Tubing 63Cm..
Features
- It's 100% Creality Original.
- Upgrade with Low Friction Capricorn Original PTFE Tubing 63CM.
- Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #5
CHPOWER CR-10 Hotend Assembly, CR10 Hotend with Fan, 3D Printers Parts/Accessories Compatible with Printer CR-10 CR-10S CR-10S
Asin: B07B6J17P2 | Model: cr10 extruder upgrade | PartNumber: cr10 extruder upgrade
Cr10s Hotend: 100% Original And High Quality 3D Printer Accessories For Cr-10 Cr-10S S4 S5.
Chpower Is A Trusted Vendor, We Provide 12-Month Manufacturer Warranty On All Parts. Buy With Confidence..
Cr10 Hotend: Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
Mk8 Extruder Hot End Kit, Cr10 All Metal Hotend, White Wire Is Temperature Thermistor, Black Wire Is Heating Tube 12V 40W.
Features
- CR10s5 hot end: Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- MK8 Extruder Hot End Kit, cr10 all metal hotend, white wire is temperature thermistor, black wire is heating tube 12V 40W
- CR10s hotend: 100% original and high quality 3D Printer accessories for CR-10 CR-10S S4 S5
- CR10 hotend: Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
- CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #6
WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 10Pcs)
Asin: B09YCKJZM9 | Model: HT-NTC100K | PartNumber: HT-NTC100K | Ean: 0645716635551 | UPC: 645716635551
✔️Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Precision Temperature Measurement..
✔️Made By Winsinn. Can Be Used With The New Sensor Heater Block (Temperature Measurement Can Be Up To 350 Degrees)..
✔️Ht-Ntc100k Thermistor Adopts White High-Temperature Cord, Can Bear Higher Temperature. And For Customers' Convenience, The Wires Adopts Line Connection, The Customer Can Tear The Wires Depends On Their Application. The High Temperature Line Is Double Thicker Than Others In The Market, Not Easy To Break Off..
✔️The Temperature Measurement: -50 °C ~ +350 °C, Can Replace The Original K-Type Thermocouple Temperature. Fit For Printing High-Temperature Filament..
Features
- Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
- The temperature measurement: -50 C ~ +350 C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
See On Amazon #7
CHPOWER CR10s Hotend, CR-10 hotend Assembly, MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W
Asin: B07B6HSYR8 | Model: CHPOWER creality 3d printer accessories | PartNumber: CHPOWER creality 3d printer accessories | Ean: 0604348976579 | UPC: 604348976579
Cr-10 Hot End Mk8 Extruder Hot End Kit, White Wire Is Temperature Thermistor, Black Wire Is Heating Tube 12V 40W.
Chpower Is A Trusted Vendor, We Provide 12-Month Manufacturer Service On All Parts. Buy With Confidence..
Cr10s5 Hot End：Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
100% Original And High Quality Cr10 Hot End 3D Printer Accessories For Cr10/ Cr10s/ Cr10s4/ Cr10s5.
Features
- This cr10s hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- 100% original and high quality cr10 hot end 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5
- CR-10 hot end MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W
- CR10s5 hot end Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
- CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #8
Ruimou Extruder Hotend End Kit, Used for Upgrade CR-10S Pro CR-10 Max, CR-10S Pro V2 3D Printer Extruder Assembled MK8 Hot End Kit, with Aluminum Heating Block Hotend Kit,0.4mm Nozzle- 24V 40W
Asin: B08ZKSN7M4 | Model: CR-10S Pro, Ender-3 ,CR-10 Max | PartNumber: CR-10S Pro, Ender-3 ,CR-10 Max | Ean: 0750139423439 | UPC: 750139423439
3.【 Material】-Tip Of The Nozzle, Aluminum Heating Block, Ptfe Tube. This Hot End Can Reach Over 260℃, For High Temperature Performance..
5.【Package Includes】-1 X Extruder Hot End Kit , 1 X Mk8 Black Silicone Sleeve.
4.【Replacement】 - This Hot End Replaced The Old Or Damaged One Perfectly, The Hot End Was Easy To Get Operational With Minimum Soldering. Print Quality Is Great..
2.【Nozzle】- 0.4Mm Nozzle, Compatible Hotend For 1.75Mm Filament. Work With 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzles..
Features
- 1. Features - This Hot End Kit suitable for Creality 3D CR-10S Pro ,CR-10 Max, CR-10S Pro V2 3D Printer MK8 Extruder Hot End Kit, White line is 100K thermistor, red line is 24V 40W heating tube(heater no connector),blue high temperature resistant PTFE tube is about 0.6m long.
- 2. Nozzle - 0.4mm nozzle, Compatible hotend for 1.75mm filament. Work with 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles.
- 3. Material -Tip of the nozzle, aluminum heating block, PTFE tube. This hot end can reach over 260 , for high temperature performance.
- 4. Replacement - This hot end replaced the old or damaged one perfectly, the hot end was easy to get operational with minimum soldering. Print quality is great.
- 5. Package Includes -1 x Extruder Hot End Kit , 1 x MK8 Black Silicone Sleeve
- See more on Amazon...
Brand: Ruimou | Manufacturer: Dongguan Ruimo International Trade Co., Ltd.
See On Amazon #9
MAXGLEE Ender 3 Hotend Assembly Kit 24V 40W for Creality Ender-3 CR10 CR10s 3D Printers Parts Upgrade Extruder
Asin: B09JGMC8MB
【Rigorous Upgrade Materials】Maxglee 3D Printer Hotend Strictly Follows Making Standard, Seamless Connection Of Nozzle And Throat To Prevent Leakage. Which To Solve The Issues Of Frequent Replacement Of Ntc Burnout, Wire Breakage And Rapid Aging Of The Heating Rod..
【Fast Service Response】We Respect Every Customer. Every Item Strictly Passed Qc Before Shipment. But If You Have Any Doubts, We Will Response Your Message Within 24 Hours.Thank You For Choosing Us..
【Better 3D Printing Experience】We Have Made A Practical And Effective Product Package Match For Your Experience. What You Will Get In The Box: 24V Assembled Hotend Kit*1Set, Brass Nozzle*3Pcs, Golden Aluminum Heating Block*4Pcs, Black Heater Block Silicone Cover*4Pcs, Mk8 3D Printing 0.4Mm Nozzle Cleaning Steel Needle*1Set/5Pcs, Random Small Gift*1..
【Suitble For Material】The Metal 3D Printer Extruder Hotend Kit Can Withstand Higher Temperatures -40~+260°C (-40~+500°F) , Many Selection Of Printing Materials，Such As Abs, Nylon, And Polycarbonate Etc 1.75Mm 3D Printer Filaments..
Features
- Suitable for 3D Printer The metal MK8 ender3 hotend upgrade kit compatible with almost series of Creality Ender and CR 3D printers, such as Ender3/CR10/CR10S. The hot end is assembly for fast installation.
- Suitble for Material The metal 3d printer extruder hotend kit can withstand higher temperatures -40~+260 C (-40~+500 F) , many selection of printing materials such as ABS, Nylon, and Polycarbonate etc 1.75mm 3D Printer Filaments.
- Rigorous Upgrade Materials MAXGLEE 3d printer hotend strictly follows making standard, seamless connection of nozzle and throat to prevent leakage. Which to solve the issues of frequent replacement of NTC burnout, wire breakage and rapid aging of the heating rod.
- Better 3D Printing Experience We have made a practical and effective product package match for your experience. What you will get in the box: 24V Assembled Hotend Kit*1Set, Brass Nozzle*3Pcs, Golden Aluminum Heating Block*4Pcs, Black Heater Block Silicone Cover*4Pcs, MK8 3D Printing 0.4mm Nozzle Cleaning Steel Needle*1Set/5Pcs, Random Small Gift*1.
- Fast Service Response We respect every customer. Every item strictly passed QC before shipment. But if you have any doubts, we will response your message within 24 hours.Thank you for choosing us.
- See more on Amazon...
Brand: MAXGLEE | Manufacturer: MAXGLEE
See On Amazon #10
Befenybay Upgrade Supporting Rod Set for Creality 3D Printer CR-10S PRO and CR-10S PRO V2 (300x300x400mm-CR-10S PRO V2)
Asin: B09L157SBH | Model: BE097 | PartNumber: BE097 | Ean: 0787874008737 | UPC: 787874008737
【Function】Reduces The Vibration Made By Printing, Supporting Rod Kit Makes 3D Printing More Stable.
【Package】Package Included All The Necessary Parts For Supporting Rod Set.
【Widely Used】Used For Upgrading 3D Printer Cr-10S Pro And Cr-10S Pro V2,It Holds The Printer Pretty Solid So You Can Printer Super Tall Prints And Not Worry About The Frame Moving.
【Easy To Install】Complete Accessories And Installation Tools,This Support Rod Is Easy To Install.
Features
- Material This kit is an all metal construction including the L brackets, it's supposed to add rigidity to your printer
- Easy to Install Complete accessories and installation tools,this support rod is easy to install
- Function Reduces the vibration made by printing, supporting rod kit makes 3d printing more stable
- Widely Used Used for upgrading 3D Printer CR-10S PRO and CR-10S PRO V2,it holds the printer pretty solid so you can printer super tall prints and not worry about the frame moving
- Package Package included all the necessary parts for supporting rod set
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon
Looking For Something Else?
Search