Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon
Asin: B0796MXSV1 | Ean: 0662850001707 | UPC: 662850001707
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Will Improve Surface Finish And Reduce Heat Build Up When Drilling.
Makes 11 Gallons After Mixing.
Biodegradable & Non-Toxic.
Rotamagic Extends Tool Life And Improves Cutter Performance, Use With Ferrous Or Non-Ferrous Materials.
Features
- RotaMagic Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water
- RotaMagic extends tool life and improves cutter performance, Use with ferrous or non-ferrous materials
- Will improve surface finish and reduce heat build up when drilling
- Biodegradable & Non-Toxic
- Makes 11 Gallons after mixing
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 5.20 x 12.10 x 5.80 inches
See On Amazon Similar To Hougen 11742 RotaMagic Metal Cutting
#1
Hougen 11075 RotaCut High Speed Steel Cutter Kit 5/16 , 3/8", 7/16 , 1/2", 9/16 , 5/8, 3/4", 1/4" Cutting Depth, Bright Finish, 3/8" Shank
Asin: B003LY4E0Y | Model: 11075HOU | PartNumber: 11075HOU | Ean: 0662850010594, 0662850110751 | UPC: 662850110751, 662850010594
✔️Hougen Sheet Metal Hole Cutters Are Not Hole Saws - They’Re Precision Ground And Heat Treated High-Performance Cutting Tools That Produce Clean, Burr-Free, Round Holes Without Ripping, Tearing, Or Deforming The Surrounding Material. They Can Produce Holes Up To 3X Faster Than Hole Saws And Last 10X Longer..
✔️Hougen’S Sheet Metal Hole Cutters Allow You To Maximize Feed Rates And Distribute The Cutting Load Evenly Over Many Cutting Edges, Rather Than Just Two Edges As A Twist Drill. Also, By Cutting Around The Hole, Hougen Sheet Metal Hole Cutters Convert A Smaller Area To Chips, Leaving The Center As A Slug, Requiring Less Horsepower And Thrust Than Twist Drills..
✔️For Use In Hand Held Drills With Either 3/8" Or 1/2" Diameter Chucks, Or Air Feed Drill Spindles For Production Work..
✔️Holemaking – Faster And Easier Than With Conventional Twist Drills Andhole Saws – In Sheet Metal; Plate Materials; Hardened Steel, Mild Steel; Stainless Steel And Plastics; For Use In Hand Held Drills With Either 3/8" Or 1/2" Diameter Chucks, Or Air Feed Drill Spindles For Production Work..
Features
- Hougen Sheet Metal Hole Cutters are Perfect For: Electrical; Pipe and Tubing; Conduit Work; Sheet Metal fabrication; Maintenance Installations; HVAC / PHCC; Automotive Aftermarket and many other industries
- Holemaking faster and easier than with conventional twist drills andhole saws in Sheet Metal; Plate Materials; Hardened Steel, Mild Steel; Stainless Steel and Plastics; For use in hand held drills with either 3/8 or 1/2 diameter chucks, or air feed drill spindles for production work.
- Hougen Sheet Metal Hole Cutters are not hole saws - they re precision ground and heat treated high-performance cutting tools that produce clean, burr-free, round holes without ripping, tearing, or deforming the surrounding material. They can produce holes up to 3x faster than hole saws and last 10x longer.
- For use in hand held drills with either 3/8 or 1/2 diameter chucks, or air feed drill spindles for production work.
- Hougen s Sheet Metal Hole Cutters allow you to maximize feed rates and distribute the cutting load evenly over many cutting edges, rather than just two edges as a twist drill. Also, by cutting around the hole, Hougen Sheet Metal Hole Cutters convert a smaller area to chips, leaving the center as a slug, requiring less horsepower and thrust than twist drills.
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.71 pounds
Warranty: 90 day warranty
See On Amazon #2
Hougen 17824 3/4" x 1" Depth of Cut Rotaloc Plus Annular Cutter (Replaces Hougen 17224)
Asin: B078SWBK1B | Model: 17824 | PartNumber: 17824 | Ean: 0662850023310 | UPC: 662850023310
Features A Tool-Less Shank For Quick Size Changes.
Requires Pilot 17810 (Hmd130) Or 17470 (Hmd150). Made In Usa.
Made With Stack-Cut Geometry For Cutting Thru Two Or More Pieces Of Steel At One Time.
Made From M42 Hss For Fast Holes In All Types Of Metals.
Features
- Annular cutters for use with the Hougen HMD130 magnetic drill
- Made from M42 HSS for fast holes in all types of metals
- Features a tool-less shank for quick size changes
- Made with stack-cut geometry for cutting thru two or more pieces of steel at one time
- Requires pilot 17810 (HMD130) or 17470 (HMD150). Made in USA
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 3.25 x 1.13 x 1.13 Inches
See On Amazon #3
Hougen 11085 RotaCut Hole Cutter Master Kit - Fractional 21 Piece, 1/4 to 3/4" Cutter Diameter, 1/4" Cutting Depth
Asin: B07CZCBMTG | Model: 11085 | PartNumber: 11085 | Ean: 0662850010655 | UPC: 662850010655
Virtually Burr-Free Holes, Doesn't Deform Surrounding Material, While Deburring Holes.
Includes: (1) Arbor; (1) Center Punch; (3) Pilots & (16) Cutters - 1/4" 9/32" 5/16" 11/32" 3/8" 13/32" 7/16" 29/64" 15/32" 1/2" 17/32" 9/16" 5/8" 11/16" 23/32" 3/4" Made In U.S.A..
Packaged In A Sturdy Plastic Storage Case, Material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number Of Flats: 3.
Annular Design Cuts The Periphery Of The Hole, Drills Holes 3 Times Faster Than Twist Drills Or Hole Saws.
Features
- Used in hand-held electric drills and in drill presses, Can drill holes 1/4 or 1/2 thick depending on diameter
- Annular design cuts the periphery of the hole, Drills holes 3 times faster than twist drills or hole saws
- Virtually burr-free holes, Doesn't deform surrounding material, while deburring holes
- Packaged in a sturdy plastic storage case, Material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number of Flats: 3
- Includes: (1) Arbor; (1) Center Punch; (3) Pilots & (16) cutters - 1/4 9/32 5/16 11/32 3/8 13/32 7/16 29/64 15/32 1/2 17/32 9/16 5/8 11/16 23/32 3/4 MADE IN U.S.A.
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 1.50 x 6.90 x 4.50 inches | Weight: 0.90 pounds
See On Amazon #4
Hougen 11078 RotaCut Large Diameter Hole Cutter Kit - Fractional, 9 Piece 7/8 to 1-1/2" Cutter Diameter 1/2" Cutting Depth
Asin: B003LY4E18 | Model: 11078HOU | PartNumber: 11078HOU | Ean: 0662850010624, 0662850110782 | UPC: 662850010624, 662850110782
Virtually Burr-Free Holes, Doesn't Deform Surrounding Material, While Deburring Holes.
Includes:(6) Annular Cutters; 1/2" Arbor Assembly; Center Punch; Pilot - 7/8; 1; 1-1/8; 1-1/4; 1-3/8; 1-1/2 Made In U.S.A..
Packaged In A Sturdy Plastic Storage Case, Material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number Of Flats: 3.
Annular Design Cuts The Periphery Of The Hole, Drills Holes 3 Times Faster Than Twist Drills Or Hole Saws.
Features
- Used in hand-held electric drills and in drill presses, Can drill holes 1/4 or 1/2 thick depending on diameter
- Annular design cuts the periphery of the hole, Drills holes 3 times faster than twist drills or hole saws
- Virtually burr-free holes, Doesn't deform surrounding material, while deburring holes
- Packaged in a sturdy plastic storage case, Material Application Aluminum; Mild Steel; Stainless Steel; Steel, Finish/Coating: Bright, Flatted:Yes, Number of Flats: 3
- Includes:(6) Annular Cutters; 1/2 Arbor Assembly; Center Punch; Pilot - 7/8; 1; 1-1/8; 1-1/4; 1-3/8; 1-1/2 MADE IN U.S.A.
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 1.70 x 8.00 x 5.00 inches | Weight: 1.46 Pounds
Warranty: 90 day warranty
See On Amazon #5
Hougen 11005 RotaCut Arbor for 1/2-Inch Chucks
Asin: B00209ULLC | Model: 11005HOU | PartNumber: 11005HOU | Ean: 0785533660104, 0662850110058 | UPC: 662850110058, 785533660104
For Use With 13/16-Inch Thru 1-1/2-Inch Diameter Cutters.
Hougen Maintains A Complete Stock Of Replacement Parts For All Sheet Metal Arbors.
Triple Flatted For 1/2-Inch Chuck.
With 1/2-20 Mounting Thread.
Features
- Arbor with Pilot Pin
- With 1/2-20 mounting thread
- For use with 13/16-inch thru 1-1/2-inch diameter cutters
- Triple Flatted for 1/2-inch chuck
- Hougen maintains a complete stock of replacement parts for all sheet metal arbors
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.28 Pounds
Warranty: 90 day warranty
See On Amazon #6
Hougen 11108 RotaCut 3/8-Inch Cutter with 3/8-24 Threaded Hole
Asin: B003LY4E2M | Model: 11108HOU | PartNumber: 11108HOU | Ean: 0662850100080 | UPC: 662850100080
Holemaking Is Faster And Easier Than With Conventional Twist Drills And Hole Saws.
Produce Clean, Burr-Free, Round Holes Without Deforming Surrounding Material.
Rotacut Cutters Are Precision-Ground.
Maximum Depth Of Cut 1/4-Inch.
Features
- 3/8-Inch cutter diameter
- Maximum depth of cut 1/4-inch
- Holemaking is faster and easier than with conventional twist drills and hole saws
- RotaCut cutters are precision-ground
- Produce clean, burr-free, round holes without deforming surrounding material
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 4.55 Pounds
Warranty: 90 day warranty
See On Amazon #7
Hougen 11148 RotaCut 1-Inch Cutter with 1/2-20 Threaded Hole
Asin: B000LG9XWY | Model: 11148HOU | PartNumber: 11148HOU | Ean: 0662850111482 | UPC: 662850111482
Holemaking Is Faster And Easier Than With Conventional Twist Drills And Hole Saws.
Produce Clean, Burr-Free, Round Holes Without Deforming Surrounding Material.
Rotacut Cutters Are Precision-Ground.
Maximum Depth Of Cut 1/2-Inch.
Features
- 1-Inch cutter diameter
- Maximum depth of cut 1/2-inch
- Holemaking is faster and easier than with conventional twist drills and hole saws
- RotaCut cutters are precision-ground
- Produce clean, burr-free, round holes without deforming surrounding material
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 4.63 x 2.88 x 1.25 Inches | Weight: 0.07 Pounds
Warranty: 90 day warranty
See On Amazon #8
Hougen 11741-12 1 Pint RotaMagic Super Concentrated Cutting Fluid, 12 Pack
Asin: B09YB9SD1V | Ean: 0662850001691 | UPC: 662850001691
Biodegradable & Non-Toxic.
Preferred Lubricant For Hougen Magnetic Drills & Annular Cutters.
12 Bottles, When Mixed With Water, Make 12 Pints Total.
Water Soluble And Yields A 10:1 Ratio When Mixed With Water.
Features
- RotaMagic Super Concentrated Coolant extends the life of cutting tools & annular cutters
- Water soluble and yields a 10:1 ratio when mixed with water
- Biodegradable & Non-toxic
- 12 bottles, when mixed with water, make 12 pints total
- Preferred lubricant for Hougen magnetic drills & annular cutters
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 8.00 x 11.25 x 8.50 inches
See On Amazon #9
Hougen 11120 9/16" RotaCut Hole Cutter
Asin: B09XP2W4VB | Ean: 0662850010815 | UPC: 662850010815
Use In Hand-Held Drills Or Drill Presses.
Requires Arbor: 11088 Or 11006 Made In Usa.
For Materials Up To 1/4" (6.4Mm) Thick.
Cuts Holes 3 Times Faster And Lasts Up To 10 Times Longer Than Twist Drills Or Hole Saws.
Features
- Produces clean burr-free holes quickly in sheet metal & plate materials
- Cuts holes 3 times faster and lasts up to 10 times longer than twist drills or hole saws
- Use in hand-held drills or drill presses
- For materials up to 1/4 (6.4mm) thick
- Requires arbor: 11088 or 11006 Made in USA
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 6.25 x 4.00 x 0.56 Inches | Weight: 0.03 Pounds
See On Amazon #10
HOUGEN Pilot for ROTALOC Cutters (17100)
Asin: B005YSW1YQ | Ean: 0662850004852 | UPC: 662850004852
Made In Usa.
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 0.38 x 0.38 x 3.00 inches | Weight: 0.04 pounds
See On Amazon #11
Hougen 11140 RotaCut 7/8-Inch Cutter with 1/2-20 Threaded Hole
Asin: B000LGDSKC | Model: 11140HOU | PartNumber: 11140HOU | Ean: 0662850111406 | UPC: 662850111406
Holemaking Is Faster And Easier Than With Conventional Twist Drills And Hole Saws.
Produce Clean, Burr-Free, Round Holes Without Deforming Surrounding Material.
Rotacut Cutters Are Precision-Ground.
Maximum Depth Of Cut 1/2-Inch.
Features
- 7/8-Inch cutter diameter
- Maximum depth of cut 1/2-inch
- Holemaking is faster and easier than with conventional twist drills and hole saws
- RotaCut cutters are precision-ground
- Produce clean, burr-free, round holes without deforming surrounding material
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 4.63 x 2.88 x 1.25 Inches | Weight: 0.10 Pounds
Warranty: 90 day warranty
See On Amazon #12
Hougen 17830 15/16" x 1" Depth of Cut Rotaloc Plus Annular Cutter (Replaces Hougen 17230)
Asin: B078SXS9VF | Model: 17830 | PartNumber: 17830 | Ean: 0662850023341 | UPC: 662850023341
Features A Tool-Less Shank For Quick Size Changes.
Requires Pilot 17810 (Hmd130) Or 17470 (Hmd150). Made In Usa.
Made With Stack-Cut Geometry For Cutting Thru Two Or More Pieces Of Steel At One Time.
Made From M42 Hss For Fast Holes In All Types Of Metals.
Features
- Annular cutters for use with the Hougen HMD130 magnetic drill
- Made from M42 HSS for fast holes in all types of metals
- Features a tool-less shank for quick size changes
- Made with stack-cut geometry for cutting thru two or more pieces of steel at one time
- Requires pilot 17810 (HMD130) or 17470 (HMD150). Made in USA
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 2.88 x 1.63 x 1.63 inches | Weight: 0.15 pounds
See On Amazon #13
Hougen 11200C RotaCut Spotweld Cutter
Asin: B003LY4E72 | Model: 11200CHOU | PartNumber: 11200CHOU | Ean: 0662850112007 | UPC: 662850112007
Fast Cutting Action.
Includes A 3/8-Inch Rotacut P/N 11108, Arbor P/N 11088 And Instructions.
Lasts For Hundred Or Thousands Of Spotwelds.
Heavy Cutter Wall.
Features
- Removes spotwelds in auto body and restoration work
- Heavy cutter wall
- Fast cutting action
- Lasts for hundred or thousands of spotwelds
- Includes a 3/8-inch RotaCut p/n 11108, Arbor p/n 11088 and instructions
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 1.00 x 6.30 x 5.00 inches
Warranty: 90 day warranty
See On Amazon #14
Hougen 11132C 3/4-Inch RotaCut Hole Cutter | 1/4-Inch Depth of Cut | Use with 3/8-24 Threaded Holes | Cut Faster and for Longer Than Twist Drills and Hole Saws | 3 Pack
Asin: B01KKO6I7Y | Model: 11132C | PartNumber: 11132C | Ean: 0662850111321 | UPC: 662850111321
Brand: Hougen | Manufacturer: Hougen
See On Amazon #15
Hougen 11116 1/2" RotaCut Hole Cutter
Asin: B0C4VBDMYJ | Ean: 0662850010792 | UPC: 662850010792
Use In Hand-Held Drills Or Drill Presses.
Requires Arbor: 11088 Or 11006 Made In Usa.
For Materials Up To 1/4" (6.4Mm) Thick.
Cuts Holes 3 Times Faster And Lasts Up To 10 Times Longer Than Twist Drills Or Hole Saws.
Features
- Produces clean burr-free holes quickly in sheet metal & plate materials
- Cuts holes 3 times faster and lasts up to 10 times longer than twist drills or hole saws
- Use in hand-held drills or drill presses
- For materials up to 1/4 (6.4mm) thick
- Requires arbor: 11088 or 11006 Made in USA
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 6.25 x 4.00 x 0.56 Inches | Weight: 0.03 Pounds
See On Amazon #16
Hougen 17470 Pilot for RotaLoc Plus Cutters
Asin: B003LY4F6M | Model: 17470HOU | PartNumber: 17470HOU | Ean: 0662850174708 | UPC: 662850174708
Standard Pilot For Hmd150.
1-Inch Depth Of Cut.
Locates The Holes Center Point.
Made Of M2 High Speed Steel.
Features
- Use with Hougen HMD150 drill
- Made of M2 high speed steel
- Standard Pilot for HMD150
- Locates the holes center point
- 1-Inch depth of cut
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Warranty: 90 day warranty
See On Amazon #17
Hougen 5/8" RotaCut Hole Cutter () (11124C)
Asin: B00C3HZXJG | Model: 11124C | PartNumber: 11124C | Ean: 0662850111246 | UPC: 662850111246
Brand: Hougen | Manufacturer: Hougen
See On Amazon #18
Hougen 11164 RotaCut 1-1/4-Inch Cutter with 1/2-20 Threaded Hole
Asin: B003LY4E5Y | Model: 11164HOU | PartNumber: 11164HOU | Ean: 0662850111642 | UPC: 662850111642
Holemaking Is Faster And Easier Than With Conventional Twist Drills And Hole Saws.
Produce Clean, Burr-Free, Round Holes Without Deforming Surrounding Material.
Rotacut Cutters Are Precision-Ground.
Maximum Depth Of Cut 1/2-Inch.
Features
- 1-1/4-Inch cutter diameter
- Maximum depth of cut 1/2-inch
- Holemaking is faster and easier than with conventional twist drills and hole saws
- RotaCut cutters are precision-ground
- Produce clean, burr-free, round holes without deforming surrounding material
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen
Dimensions: 4.63 x 2.88 x 1.25 Inches | Weight: 0.12 Pounds
Warranty: 90 day warranty
See On Amazon #19
Hougen 17834 1-1/16" x 1" Depth of Cut Rotaloc Plus Annular Cutter (Replaces Hougen 17234)
Asin: B078SW2TW4 | Model: 17834 | PartNumber: 17834 | Ean: 0662850023365 | UPC: 662850023365
Features A Tool-Less Shank For Quick Size Changes.
Requires Pilot 17810 (Hmd130) Or 17470 (Hmd150). Made In Usa.
Made With Stack-Cut Geometry For Cutting Thru Two Or More Pieces Of Steel At One Time.
Made From M42 Hss For Fast Holes In All Types Of Metals.
Features
- Annular cutters for use with the Hougen HMD130 magnetic drill
- Made from M42 HSS for fast holes in all types of metals
- Features a tool-less shank for quick size changes
- Made with stack-cut geometry for cutting thru two or more pieces of steel at one time
- Requires pilot 17810 (HMD130) or 17470 (HMD150). Made in USA
- See more on Amazon...
Brand: Hougen | Manufacturer: Hougen Manufacturing
Dimensions: 2.88 x 1.63 x 1.63 Inches | Weight: 0.20 Pounds
See On Amazon
Looking For Something Else?
Search