iJDMTOY (1 Plug-N-Play Strobe Flash Controller Compatible With 2015-2021 Subaru WRX or STI Rear Windshield LED High Mount Third Brake Light
Asin: B079C9ZW9X | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Plug And Play Installation, No Wiring Required.
Convert The Original Solid On/Off Back Windshield 3Rd Brake Light To Strobe/Flash Mode.
Features
- Compatible with 2015-2021 Subaru WRX or STI
- Convert the original solid on/off back windshield 3rd brake light to strobe/flash mode
- Plug and play installation, no wiring required
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.03 pounds
See On Amazon Similar To iJDMTOY 1 PlugNPlay Strobe Flash
#1
iJDMTOY (1 Alternating Left/Right Strobe Flash Module Box Compatible with Car Fog Lights, LED Daylight DRL, Work Lights and More
Asin: B00XM10ON2 | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
High Wattage Capacity: Up To 4Amp, Output (Aka 48W).
Input: 12V Dc, Output: 12V Dc.
Features
- 1 piece (Total length: 9 inches)
- Input: 12V DC, Output: 12V DC
- High wattage capacity: up to 4AMP, output (aka 48W)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #2
iJDMTOY Smoked Lens F1 Style Strobe Featured LED Trunk Lid High Mount Third Brake Light Assembly Compatible with 1997-2004 Chevy C5 Corvette
Asin: B09WTMTQGB | Model: Truck Rear Tail High Mounting 3rd Brake | PartNumber: Truck Rear Tail High Mounting 3rd Brake
Special Designed With A Strobe Enable Switch! When You Turn It On, The Led 3Rd Brake Will Quick Blink 5 Times When You Hit On The Brake Just Like The Formula-One F1 Or Nascar Racing Car.
Replace The Old School Dot Led Red Lens 3Rd Brake Gm-10253893/12-908.
Easy Plug-N-Play Replace The Oem Red Altezza Style 3Rd Brake For A More Modern And Brighter Full Led Setup With Improved Safety And Style For Your Vette Super Car!.
Full Led Trunklid High Mount Third Brake Lamp With Trendy Black Smoke Lens And Powered By A Full Strip Of Red Led Lights For Brake/Stop Light.
Features
- Compatible with 1997-2004 Chevrolet Gen5 Corvette
- Full LED trunklid high mount third brake Lamp with trendy black smoke lens and powered by a full strip of red LED lights for brake/stop light
- Special designed with a strobe enable switch! When you turn it on, the LED 3rd brake will quick blink 5 times when you hit on the brake just like the Formula-One F1 or Nascar racing car
- Easy plug-N-play replace the OEM red altezza style 3rd brake for a more modern and brighter full LED setup with improved safety and style for your Vette super car!
- Replace the old school dot LED red lens 3rd brake GM-10253893/12-908
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #3
iJDMTOY 8-Pin CF18 LM449 Speed Adjustable Strobe/Flash/Blink LED Flasher Relay Fix Compatible with Lexus Scion Toyota Installing LED Turn Signal Light Bulbs
Asin: B09TS6GB45 | Model: CF-18 Fix LED Hyper Rapid Flashing Issue | PartNumber: CF-18 Fix LED Hyper Rapid Flashing Issue
8-Pin Configuration For The Newly Toyot* Family Vehicles, Replace Oem Part # 81980-50030, 81980-53010, 81980-02030, 81980-34020, 066500-4650, Etc.
Comparing With The Conventional Load Resistors, The Led Flasher Will Not Generate Any Heat And One Piece Will Solve The Entire Vehicle's Up To 4 Led Bulbs Conversion.
Good For Many Newly Models Installing The Front Or Back, Or Both Front/Back With Leds, Incandescent Bulbs Or A Mixture Of Both!.
1 Piece Speed Adjustable Blink/Flash/Strobe 3-In-1 Lm449 Cf-18 Led Electronic Flasher Relay Module Box (Please See Video For The Blink/Strobe Demonstration).
Features
- Compatible with Subaru 13-21 BRZ, 09-18 Forester, 08-16 Impreza, 03-09 Legacy, 05-14 Outback, 08-21 WRX/STI, 13-17 XV Crosstrek; Compatible with Toyota 17-21 86, 03-09 4Runner,, 02-11 Camry, 03-10 Corolla, 07-14 FJ Cruiser, 01-13 Highlander, 01-16 Land Cruiser, 03-13 Matrix, 01-15 Prius, 01-12 RAV4, 01-18 Sequoia, 05-15 Tacoma, 00-06 Tundra, 09-16 Venza, 07-11 Yaris; compatible with Lexus 11-14 CT, 02-12 ES, 08-13 IS250 IS350, 07-12 LS, 06-16 LX, 99-13 RX; 13-16 FR-S, 05-13 tC, xA, xB, xD, etc
- 1 piece speed adjustable blink/flash/strobe 3-in-1 LM449 CF-18 LED electronic flasher relay module box (please see video for the blink/strobe demonstration)
- 8-pin configuration for the newly Toyot* family vehicles, Replace OEM Part # 81980-50030, 81980-53010, 81980-02030, 81980-34020, 066500-4650, etc
- Good for many newly models installing the front or back, or both front/back with LEDs, incandescent bulbs or a mixture of both!
- Comparing with the conventional load resistors, the LED flasher will not generate any heat and one piece will solve the entire vehicle's up to 4 LED bulbs conversion
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.08 pounds
See On Amazon #4
iJDMTOY Pair Plug-N-Play 9005 9006 9145 H10 LED Use Strobe Flash Module Box Controllers
Asin: B08NXZCYXD | Model: Emergency Strobing Flashing Warning Kit | PartNumber: Emergency Strobing Flashing Warning Kit
Input 12V Dc, Output 12V Dc, Wattage Up To 55W.
When You Turn On The Fog The First Time, The Light Will Stay Solid; When You Quickly Turn It Off And On Again, The Module Box Will Trigger The Strobe Flash Feature; Turn It Off And Wait About 2 Sec And Turn The Fog Back On, It Will Light Up Solid Again (See Demo Video).
Plug And Play For 9005 9006 9145 H10 Bulb Sizes, Good For H.I.D, Halogen Or Replacement Bulbs.
Features
- One pair left/right strobe flash enable modules for both driving or fog light use
- Plug and play for 9005 9006 9145 H10 bulb sizes, good for H.I.D, halogen or replacement bulbs
- Input 12V DC, Output 12V DC, Wattage up to 55W
- When you turn on the fog the first time, the light will stay solid; when you quickly turn it off and on again, the module box will trigger the strobe flash feature; turn it off and wait about 2 sec and turn the fog back on, it will light up solid again (see demo video)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #5
iJDMTOY Plug-N-Play Front Turn Signal LED Hyper Flash Fix Decoder Wires Compatible with 2015-2021 Subaru WRX/STI
Asin: B0864PKWWN | Model: Direct plug and play for LED light bulbs | PartNumber: Direct plug and play for LED light bulbs
No Modification Required When You Upgrade To The S4 Led Drl Bezel And Just Want To Use The Led Turn Signal (Bypass The Original Turn Signal Light).
Also Good For When You Want To Replace The 7440 Incandescent Front Turn Signal Bulbs And Convert Them To Led.
Direct Inline, Plug-N-Play Load Resistor Equalizer To Prevent Led Related Turn Signal Lamp Hyper Flash Problems.
Features
- Compatible with 2015-2021 Subaru WRX or WRX STI
- Direct inline, plug-N-play load resistor equalizer to prevent LED related turn signal lamp hyper flash problems
- No modification required when you upgrade to the S4 LED DRL bezel and just want to use the LED turn signal (bypass the original turn signal light)
- Also good for when you want to replace the 7440 incandescent front turn signal bulbs and convert them to LED
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.19 Pounds
See On Amazon #6
iJDMTOY Pair Plug-N-Play H11 H8 H9 LED Replacement Use Strobe Flash Module Box Controllers
Asin: B08JT6Q2ZQ | Model: Emergency Strobing Flashing Warning Kit | PartNumber: Emergency Strobing Flashing Warning Kit
Input 12V Dc, Output 12V Dc, Wattage Up To 55W.
When You Turn On The Fog The First Time, The Light Will Stay Solid; When You Quickly Turn It Off And On Again, The Module Box Will Trigger The Strobe Flash Feature; Turn It Off And Wait About 2 Sec And Turn The Fog Back On, It Will Light Up Solid Again (See Demo Video).
Plug And Play For H11 H8 H9 Bulb Sizes, Good For H.I.D, Halogen Or Replacement Bulbs.
Features
- One pair left/right strobe flash enable modules for both front lamps or fog lights use
- Plug and play for H11 H8 H9 bulb sizes, good for H.I.D, halogen or replacement bulbs
- Input 12V DC, Output 12V DC, Wattage up to 55W
- When you turn on the fog the first time, the light will stay solid; when you quickly turn it off and on again, the module box will trigger the strobe flash feature; turn it off and wait about 2 sec and turn the fog back on, it will light up solid again (see demo video)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.17 Pounds
See On Amazon #7
iJDMTOY Pair 12-Chipset High Power LED Surface Flush Mount Strobe Flash Lighting Kit Compatible with Jeep Car Truck SUV 4x4 Side Markers, Lights, White Color
Asin: B083TF2DCW | Model: Universal Fit Side Fender, Bumper, Grill | PartNumber: Universal Fit Side Fender, Bumper, Grill
Special Flush Mount Hide Design Allows You To Either Directly Mount The Led Light On The Surface With The Provided Screws Or Drill A 1-Inch Opening With A Step Drill Bit And Insert The Led Light From Behind To Mount It..
Capability Of Brightness In Lumens: 27/Led.
Good For The Front Or Rear Bumper/Fender, Inside The Front Road Illuminating Light, Tail Lamps As Warning Lights, Perfect For Construction, Utility, Emergency, Public Safety, Security, Roadside Assistance, Farm Equipment Vehicles, Etc..
This Mini Strobe Light Comes With A Built-In Controller With A Solid Light-Up Mode And 17 Different Strobe/Flash Modes Including Fast/Slow Blink, Side-By-Side Flash, Double, Single And Quad Flashing, Etc. Tap The White Wire To Ground To Change Between Strobe Patterns.
Features
- Made from a full aluminum CNC body and powered by 12 pieces of super bright white SMD LED diodes with projector lens
- This mini strobe light comes with a built-in controller with a solid light-up mode and 17 different strobe/flash modes including fast/slow blink, side-by-side flash, double, single and quad flashing, etc. Tap the white wire to ground to change between strobe patterns
- Special flush mount hide design allows you to either directly mount the LED light on the surface with the provided screws or drill a 1-inch opening with a Step Drill Bit and insert the LED light from behind to mount it.
- Good for the front or rear bumper/fender, inside the front road illuminating light, tail lamps as warning lights, perfect for construction, utility, emergency, public safety, security, roadside assistance, farm equipment vehicles, etc.
- Capability of brightness in lumens: 27/LED
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.23 Pounds
See On Amazon #8
iJDMTOY (1) 2-Pin 2Pin Electronic FL1 LED Flasher Relay Fix Compatible With Motorcycle/Bike LED Turn Signal Bulbs Hyper Flash/Rapid Blink Issues
Asin: B01IODAL1C | Model: Fix LED Bulb Hyper Rapid Flashing Issue | PartNumber: Fix LED Bulb Hyper Rapid Flashing Issue
Eliminate The Need For Tapping Wires To Install The Load Resistors And Allow Led Bulbs To Blink At The Normal Rate.
Compatible With Honda, Kawasaki, Suzuki, Yamaha Motorcycles And Many Other Brands As Well.
Easy Pins For Wirings Polarity Swtiching Design.
Features
- Completely waterproof design and direct replace most OEM two-wire/pin flasher
- Easy pins for wirings polarity swtiching design
- Eliminate the need for tapping wires to install the load resistors and allow LED bulbs to blink at the normal rate
- Compatible with Honda, Kawasaki, Suzuki, Yamaha motorcycles and many other brands as well
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #9
iJDMTOY GL88T1 Electronic LED Flasher w/Wiring Adapter Kit Compatible with Honda Gold Wing GL1800 F6B Bike Fix LED Turn Signal Bulbs Hyper Flash Issue
Asin: B087JDP491 | Model: Fix LED Bulb Hyper Rapid Flashing Issue | PartNumber: Fix LED Bulb Hyper Rapid Flashing Issue
Specification: 12V Dc, Max 30W With 80 Times/Min ??10% Flashing Frequency, Current: 0.02A-20A.
Direct Plug And Play Replace With No Modification Required.
Replace Mpn Gl88t1, Wps Pn 226-0059.
Features
- Compatible with Honda 2001-2010 Gen1 Goldwing GL1800, 2013-2017 Gen2 Goldwing GL1800 and 2013-2017 F6B Goldwing
- Replace MPN GL88T1, WPS PN 226-0059
- Specification: 12V DC, Max 30W with 80 times/min ??10% flashing frequency, Current: 0.02A-20A
- Direct plug and play replace with no modification required
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.08 Pounds
See On Amazon #10
iJDMTOY Plug-N-Play F1 Style Third Brake Light Strobe/Flash Attention Module Box/Harness, Compatible with Jeep 2018-up Wrangler JL JLU
Asin: B0CYHTJLVZ | Model: Add Lighting Conversion Wiring Harness | PartNumber: Add Lighting Conversion Wiring Harness
Activate The Jl's Initially On/Off Only 3Rd Brake Light With The Dynamic Formula-One Style Feature, Showcasing A Sequence Of 5 Quick Flashes, Followed By 5 Slower Ones Before Holding A Solid Light, As Demonstrated In The Accompanying Video.
Boost Safety And Infuse Your Wrangler Jl With A Distinctive Style Using This Versatile Accessory That Also Serves As An Extension Wire For Larger Spare Tire Setup.
With Oem-Compatible Plug-And-Play Adapters On Both Ends, This Module Box Easily Connects Between Your Existing 3Rd Brake And The Stock Harness, Enabling The F1 Strobe Feature In Less Than 5 Min Installation.
Approx 8-Inch Accessory Comes With Convenient Plug-And-Play Adapters, Featuring Both Male And Female Ends, And Includes A Strobe Flashing Module Box For An Effortless Installation.
Features
- Compatible with 2018-up Jeep Wrangler JL or JLU
- Approx 8-inch accessory comes with convenient plug-and-play adapters, featuring both male and female ends, and includes a strobe flashing module box for an effortless installation
- Activate the JL's initially ON/OFF ONLY 3rd brake light with the dynamic Formula-One style feature, showcasing a sequence of 5 quick flashes, followed by 5 slower ones before holding a solid light, as demonstrated in the accompanying video
- With OEM-compatible plug-and-play adapters on both ends, this module box easily connects between your existing 3rd brake and the stock harness, enabling the F1 strobe feature in less than 5 min installation
- Boost safety and infuse your Wrangler JL with a distinctive style using this versatile accessory that also serves as an extension wire for larger spare tire setup
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.06 Pounds
See On Amazon #11
iJDMTOY (1 12V LF-100B LED Brake Stop Light Continuously Pulsing Strobe Flash Module Controller Box Compatible with Car Motorcycle, etc
Asin: B07CZS6FMN | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Compatible With All Types Of Brake Lights, Including Led Clusters, Such As Cars, Motorcycles, Tanks, Armored Vehicles, Electric Bicycles And Other Led Lighting.
Improve Safety, Can Better Alert The Vehicles Behind You To Prevent Rear-End Collision.
Features
- Miniature size and waterproof design (IP65) with easy to install diagram on the module box
- Improve safety, can better alert the vehicles behind you to prevent rear-end collision
- Compatible with all types of brake lights, including LED clusters, such as cars, motorcycles, tanks, armored vehicles, electric bicycles and other LED lighting
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.08 Pounds
See On Amazon #12
iJDMTOY JDM Red Lens 9-LED 3rd Brake Light Assy Compatible With Toyota 4Runner Highlander Prius Sienna etc., Rear Center Roof High Mount LED Third Brake w/Strobe Flash Braking Feature
Asin: B07VFCFQQS | Model: Replace OEM 4-LED Clear Third Brake Assy | PartNumber: Replace OEM 4-LED Clear Third Brake Assy
Direct Replacement For The Oem 4-Led Clear 3Rd Brake Lamp (Oem Part # 81570-47051).
Direct Plug-N-Play For The 3Rd Brake Light Feature (Also Comes With An Optional Wire To Enable Rear Fog Or Tail Running Light Feature, If You Choose Not To Use It, Simply Not Connect This Wire At All).
Includes (1) Jdm Red Lens High Mount Brake Assembly Powered By 9 Pieces Of Brilliant Red Smd Led Diodes With Strobing Flash Warning Brake Light Feature.
Features
- Compatible with 2010-2020 Toyota 4Runner, 2014-2019 Toyota Highlander, 2010-2015 Toyota Prius, 2012-2018 Toyota Prius C, 2012-2018 Toyota Prius V and 2011-2020 Toyota Sienna
- Includes (1) JDM red lens high mount brake assembly powered by 9 pieces of brilliant red SMD LED diodes with strobing flash warning brake light feature
- Direct replacement for the OEM 4-LED clear 3rd brake lamp (OEM part # 81570-47051)
- Direct plug-N-play for the 3rd brake light feature (also comes with an optional wire to enable rear fog or tail running light feature, if you choose not to use it, simply not connect this wire at all)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.44 pounds
See On Amazon #13
iJDMTOY Super Red Strobe Flash Rear Fog Light Conversion Kit Compatible With Scion FR-S tC Toyota 86 Subaru BRZ Nissan 370Z Juke & More
Asin: B07M949ZYZ | Model: Come w/ Strobe Warning Flashing Feature | PartNumber: Come w/ Strobe Warning Flashing Feature
Convert The Factory Equipped Light-Less Center Rear Reflector Lens To Led With Steady Taillight Or Rear Fog Light Function And Strobe Warning Function When You Step On The Brake, Give Your Ride A Unique Appearance With Additional Safety Enhancement.
Wiring Guide Base On A 2014 Fr-S: Connect The Black Wire To The Stock Tail Light Black; Connect The Blue Wire To The Tail Light Red Wire For Driving/Rear Fog Light Feature And Connect The Red Wire To The Tail Light Green Wire For The Brake/Warning Light Feature.
Please Note This Is Not A Plug And Play Installation, There Is Some Very Simple Drilling And Wiring Required, Can Be Done Fairly Easily.
This Complete Pulsar Led Rear Fog Lighting Kit Comes With One Piece 15-Smd Red Led Strobe/Flash Bulb W/ Easy To Fit Rubber Base And Wiring Harness Plus A Drill Bit.
Features
- Compatible with Nissan 370Z Juke, Scion FR-S tC, Toyota 86, Subaru BRZ WRX/STI, Fiat 124 Spider as long as the vehicle that comes with a center red reflector on the lower rear bumper (for detail years and fitments, please check the description)
- This complete PULSAR LED rear fog lighting kit comes with one piece 15-SMD red LED strobe/flash bulb w/ easy to fit rubber base and wiring harness plus a drill bit
- Convert the factory equipped light-less center rear reflector lens to LED with steady taillight or rear fog light function and strobe warning function when you step on the brake, give your ride a unique appearance with additional safety enhancement
- Please note this is not a plug and play installation, there is some very simple drilling and wiring required, can be done fairly easily
- Wiring Guide base on a 2014 FR-S: connect the black wire to the stock tail light black; connect the blue wire to the tail light red wire for driving/rear fog light feature and connect the red wire to the tail light green wire for the brake/warning light feature
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.19 Pounds
See On Amazon #14
iJDMTOY (1 12V Wired Control Module w/Solid, Strobe and Flash Features Compatible with Car, Boat, Household LED Strip or Replacement Bulb
Asin: B00DRGZYXW | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Solid Light Up Function (Light), (4) Strobe Flashing Patterns (Mode), Flashing Speed Control (Speed/Bright).
Module Box Size: 1.75" (L) X 0.50" (W) X 0.15" (H).
Simply Tap The Led (+/-) Side To Led Strip Or Any Led And Then Tap The 12V (+/-) Side To 12V Power.
Input: 12V, Output: 12V.
Features
- 1 piece
- Input: 12V, Output: 12V
- Solid light up function (LIGHT), (4) Strobe flashing patterns (MODE), Flashing speed control (SPEED/BRIGHT)
- Simply tap the LED (+/-) side to LED strip or any LED and then tap the 12V (+/-) side to 12V power
- Module Box Size: 1.75 (L) x 0.50 (W) x 0.15 (H)
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.03 Pounds
See On Amazon #15
iJDMTOY (1 Brake/Stop Light Strobe Flash Module Box for Pilot Car, Escorting Vehicle, Overload/Wide Load Truck
Asin: B08NFSGDMH | Model: Mini Controller For LED or Incandescent | PartNumber: Mini Controller For LED or Incandescent
Convert The Original Tail Brake Light Or Add-On Warning Lamp To Strobe/Flash To Serve As Pilot/Escort Vehicle.
During Driving, The Light Will Blink Slowly, And When Engaging The Brake, The Light Will Strobe Rapidly; See Picture-4 For The Wiring Diagram.
Size: 2X1x0.5" With 5 Inches Long Wiring; 12V Dc, Compatible With Light Applications Up To 15W Output.
Features
- One piece of pilot car strobe module box
- Size: 2x1x0.5 with 5 inches long wiring; 12V DC, Compatible with light applications up to 15W output
- Convert the original tail brake light or add-on warning lamp to strobe/flash to serve as pilot/escort vehicle
- During driving, the light will blink slowly, and when engaging the brake, the light will strobe rapidly; see picture-4 for the wiring diagram
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.06 Pounds
See On Amazon #16
iJDMTOY Dark Red Lens F1 Style Strobe/Flash LED High Mount Third Brake/Clearance Light Assembly Compatible with 2000-2006 Toyota Tundra (Gen1)
Asin: B0BPF6GDYM | Model: Truck Rear Tail High Mounting 3rd Brake | PartNumber: Truck Rear Tail High Mounting 3rd Brake
Powered By A Surrounding Circle Shape Red Led Lights For Tail Running And Brake/Stop Light And The Center Xenon White Led Light Bar For Clearance/Reverse/Backup Function.
Easy Plug-N-Play Replace The Oem Red/Clear Altezza Style Incandescent Bulb 3Rd Brake For A More Modern And Brighter Full Led Setup With Improved Safety And Style For Your Tundra Truck!.
Special Designed With A Strobe Enable Switch! When You Turn It On, The Led 3Rd Brake Will Quick Blink 5 Times When You Hit On The Brake Just Like The Formula-One F1 Or Nascar Racing Car.
Full Led High Mount Cargo Illumination Third Brake Light With Trendy Dark Red Lens.
Features
- Compatible with 2000-2006 Toyota Tundra
- Full LED high mount cargo illumination third brake light with trendy dark red lens
- Powered by a surrounding circle shape red LED lights for tail running and brake/stop light and the center xenon white LED light bar for clearance/reverse/backup function
- Special designed with a strobe enable switch! When you turn it on, the LED 3rd brake will quick blink 5 times when you hit on the brake just like the Formula-One F1 or NASCAR racing car
- Easy plug-N-play replace the OEM red/clear altezza style incandescent bulb 3rd brake for a more modern and brighter full LED setup with improved safety and style for your Tundra truck!
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.78 Pounds
See On Amazon #17
iJDMTOY Plug-N-Play F1 Style Third Brake Light Strobe/Flash Attention Module Box/Harness, Compatible with Jeep 2007-2018 Wrangler JK JKU
Asin: B0892XTVY6 | Model: 5-Quick Flash, 5-Slow Flash & Solid Lite | PartNumber: 5-Quick Flash, 5-Slow Flash & Solid Lite
Activate The Jk's Initially On/Off Only 3Rd Brake Light With The Dynamic Formula-One Style Feature, Showcasing A Sequence Of 5 Quick Flashes, Followed By 5 Slower Ones Before Holding A Solid Light, As Demonstrated In The Accompanying Video.
Boost Safety And Infuse Your Wrangler Jk With A Distinctive Style Using This Versatile Accessory That Also Serves As An Extension Wire For Larger Spare Tire Setup.
With Oem-Compatible Plug-And-Play Adapters On Both Ends, This Module Box Easily Connects Between Your Existing 3Rd Brake And The Stock Harness, Enabling The F1 Strobe Feature In Less Than 5 Min Installation.
Approx 12-Inch Accessory Comes With Convenient Plug-And-Play Adapters, Featuring Both Male And Female Ends, And Includes A Strobe Flash Module For An Effortless Installation.
Features
- Compatible with 2007-2018 Jeep Wrangler JK JKU
- Approx 12-inch accessory comes with convenient plug-and-play adapters, featuring both male and female ends, and includes a strobe flash module for an effortless installation
- Activate the JK's initially ON/OFF ONLY 3rd brake light with the dynamic Formula-One style feature, showcasing a sequence of 5 quick flashes, followed by 5 slower ones before holding a solid light, as demonstrated in the accompanying video
- With OEM-compatible plug-and-play adapters on both ends, this module box easily connects between your existing 3rd brake and the stock harness, enabling the F1 strobe feature in less than 5 min installation
- Boost safety and infuse your Wrangler JK with a distinctive style using this versatile accessory that also serves as an extension wire for larger spare tire setup
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.06 Pounds
See On Amazon #18
iJDMTOY 3-Pin CF-14 CF14 EP35 Speed Adjustable Strobe/Flash/Blink LED Flasher Relay Fix for Upgrading Incandescent Turn Signal Light Bulbs to LED Lights
Asin: B0B44H5QW6 | Model: CF-14 Fix LED Hyper Rapid Flashing Issue | PartNumber: CF-14 Fix LED Hyper Rapid Flashing Issue
Dimensions: 1.2" L X 1.2" W X 1.5" H - Please Make Sure Size Is Compatible, Since This Led Flasher Relay Is Slightly Bigger Than The Factory One.
Comparing With The Conventional Load Resistors, The Led Flasher Will Not Generate Any Heat And One Piece Will Solve The Entire Vehicle's Up To 4 Led Bulbs Conversion.
Good For Installing The Front Or Back, Or Both Front/Back With Leds, Incandescent Bulbs Or A Mixture Of Both!.
1 Piece Speed Adjustable Blink/Flash/Strobe 3-In-1 Cf14 Ep35 Led Electronic Flasher Relay Module Box, Come With New Strobe Feature, Good For Show Purpose Or Special Event Use (Please See Video For The Blink/Strobe Demonstration).
Features
- Compatible with various of vehicles from 1971 to 2005, please confirm the fitments by opening your fuse box and look for this flasher, make sure the pins marks on the bottom with -, L, and + from left to right!
- 1 piece speed adjustable blink/flash/strobe 3-in-1 CF14 EP35 LED electronic flasher relay module box, come with new strobe feature, good for show purpose or special event use (please see video for the blink/strobe demonstration)
- Dimensions: 1.2 L x 1.2 W x 1.5 H - please make sure size is compatible, since this LED flasher relay is slightly bigger than the factory one
- Good for installing the front or back, or both front/back with LEDs, incandescent bulbs or a mixture of both!
- Comparing with the conventional load resistors, the LED flasher will not generate any heat and one piece will solve the entire vehicle's up to 4 LED bulbs conversion
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
See On Amazon #19
iJDMTOY (1 Plug-N-Play Strobe Flash Controller Compatible with 2015-2023 Ford Mustang Rear Windshield LED High Mount Third Brake Light
Asin: B079TFPN4T | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Plug And Play Installation, No Wiring Required.
Convert The Original Solid On/Off Back Windshield 3Rd Brake Light To Strobe/Flash Mode.
Features
- Compatible with 2015-2023 Ford Mustang (Gen6)
- Convert the original solid on/off back windshield 3rd brake light to strobe/flash mode
- Plug and play installation, no wiring required
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.03 Pounds
See On Amazon
Looking For Something Else?
Search