SparkFun Load Cell Amplifier - HX711 Small Breakout Board Read Load Cells to Measure Weight Four-Wire Wheatstone Bridge Configuration Connect to sensors Build Scale Process Control Presence Detection
Asin: B079LVMC6X | Model: SEN-13879 | PartNumber: SEN-13879 | Ean: 0845156007615 | UPC: 845156007615
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Two-Wire Interface (Clock And Data) For Communication With A Microcontroller Gpio Pins.
Selectable 10Sps Or 80Sps Output Data Rate. Simultaneous 50 And 60Hz Supply Rejection.
Operation Voltage: 2.7V--5V. Operation Current: < 1.5Ma..
Separated Analog And Digital Supply.
Features
- Weigh items very accurately. Some calibration required.
- Separated analog and digital supply
- Two-wire interface (Clock and Data) for communication with a microcontroller GPIO pins
- Operation Voltage: 2.7V--5V. Operation Current: < 1.5mA.
- Selectable 10SPS or 80SPS output data rate. Simultaneous 50 and 60Hz supply rejection
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
See On Amazon Similar To SparkFun Load Cell Amplifier HX711
#1
Stemedu 5PCS HX711 Load Cell Amplifier A/D 24 Bits Precision Breakout Board Dual-Channel Weighing Sensors Converter Modules for Arduino for Raspberry Pi
Asin: B07MTYT95R | Model: ST0728X5 | PartNumber: ST0728X5
🚩 The Input Multiplexer Selects Either Channel A Or B Differential Input To The Low-Noise Programmable Gain Amplifier (Pga).
🚩 What You Will Get: 5Pcs Hx711 Amplifier Module For Load Cell..
🚩 Applications: This Weighing Sensor Amplifier Module Can Use To Be Weight Scales, Kitchen Scale, Industrial Process Control And So On..
🚩 Hx711 Load Cell Ad Module Is A Specially Designed For The High Precision Electronic Scale Designwith Two Analog Input Channel To Internal Integration Of 128 Times The Programmable Gain Amplifier.
Features
- This HX711 amplifier module use 24 high precision A/D converter chip hx711, dual-Channel 24 Bit Precision A/D Module
- HX711 load cell AD module is a specially designed for the high precision electronic scale designwith two analog input channel to internal integration of 128 times the programmable gain amplifier
- The input multiplexer selects either Channel A Or B differential input to the low-noise programmable gain amplifier (PGA)
- Applications: This weighing sensor amplifier module can use to be weight scales, kitchen scale, industrial process control and so on.
- What you will get: 5pcs HX711 amplifier module for load cell.
- See more on Amazon...
Brand: Stemedu | Manufacturer: Stemedu
Dimensions: 0.20 x 1.38 x 0.79 inches
See On Amazon #2
Geekstory 5PCS HX711 AD Weighing Module Load Cell Amplifier 24 Bits Precision Weight Sensors Converter Modules for Ar.duino Raspberry Pi
Asin: B0CD7VNDQ1
The Input Circuit Can Be Configured As A Pressure Bridge (E.G., In Pressure Balance Mode) To Achieve High Accuracy And Low Cost, Making It An Ideal Front-End Module..
Please Click “Geekstory”(You Can Find ""Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Con.Tact Us.
Simple Digital Control And Serial Interface: Pin Control, No Programming Required..
The On-Chip Active Low Noise Pga Is Selectable Between 3264 And 128X Gain..
Features
- The HX711 module uses 24 high-precision A/D converter chips, the HX711 is designed for high-precision electronic scales and has two analogue input channels with an integrated 128x programmable amplifier.
- The on-chip active low noise PGA is selectable between 3264 and 128x gain.
- The input circuit can be configured as a pressure bridge (e.g., in pressure balance mode) to achieve high accuracy and low cost, making it an ideal front-end module.
- Simple digital control and serial interface: pin control, no programming required.
- Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to con.tact us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #3
2 Sets 50kg Human Scale Load Cell Weighing Sensor Resistance Strain Half-Bridge Sensor + HX711 A/D Amplifier Weight Module DIY Kit for Arduino
Asin: B097T3SX6W | Model: S02X8+S19X2 | PartNumber: S02X8+S19X2 | Ean: 0736140514779 | UPC: 736140514779
★Use One Load Sensor 50Kg With An External Resistor To Form A Full-Bridge Measurement, The Range Of A Sensor Range: 50Kg. External Resistance On The Higher Requirements..
★Use Four Weight Scale 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of Four Sensors: 50Kgx4 = 200Kg.
★Use Two Weight Sensor 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of The Two Sensors: 50Kgx2 = 100Kg.
★The Load Sensor Is A Group Of Half-Bridge Strain Gauge, There Are 3 Ways To Use It..
Features
- This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
- The load sensor is a group of half-bridge strain gauge, there are 3 ways to use it.
- Use one load sensor 50kg with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
- Use two weight sensor 50kg to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use four weight scale 50kg to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4 = 200kg
- See more on Amazon...
Brand: ShangHJ | Manufacturer: ShangHJ
Weight: 0.22 Pounds
See On Amazon #4
WWZMDiB 4Pcs HX711 Load Cell Amplifier 24-Bit ADC Weighing Sensor Module Used to Measure Force, Pressure, Displacement, Strain, Torque, Acceleration.
Asin: B0BLND4VF6 | Model: HX711 | PartNumber: HX711 | Ean: 0618202521126 | UPC: 618202521126
🥇This Module Uses 24 High Precision A/D Converter Chip Hx711..
🥉Support Widely Used In Aerospace, Mechanical, Electrical, Chemical, Construction, Medicine And Many Other Fields.
🥈The Hx711 Uses A Two Wire Interface (Clock And Data) For Communication. Any Microcontroller’S Gpio Pins Should Work And Numerous Libraries Have Been Written Making It Easy To Read Data From The Hx711..
⚡【Voltage】：2.6 ~ 5.5V.
Features
- HX711 Weighing Sensor Module : used to measure force, pressure, displacement, strain, torque, acceleration.
- Voltage 2.6 ~ 5.5V
- This module uses 24 high precision A/D converter chip hx711.
- The HX711 uses a two wire interface (Clock and Data) for communication. Any microcontroller s GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711.
- Support Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
Dimensions: 0.04 x 0.04 x 0.04 inches
See On Amazon #5
4pcs 50kg Load Cell Half Bridge Strain Gauge Human Body Scale Weight Sensor + 1pcs HX711 Amplifier AD Module for Arduino
Asin: B07B4DNJ2L | Model: 8541791593 | PartNumber: 8541791593 | Ean: 0747356634304, 0702795764555 | UPC: 702795764555, 747356634304
Use Two Weight Sensor 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of The Two Sensors: 50Kgx2 = 100Kg.
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Use Four Weight Scale 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of Four Sensors: 50Kgx4 = 200Kg.
Use One Load Sensor 50Kg With An External Resistor To Form A Full-Bridge Measurement, The Range Of A Sensor Range: 50Kg. External Resistance On The Higher Requirements..
Features
- The 50kg load cell is a group of half-bridge strain gauge, there are 3 ways to use it. 2.Use two sensors to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use one load sensor 50kg with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
- Use two weight sensor 50kg to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use four weight scale 50kg to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4 = 200kg
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: NEXTION | Manufacturer: NEXTION
Dimensions: 0.70 x 1.50 x 1.00 inches | Weight: 0.17 pounds
See On Amazon #6
ALAMSCN Digital Load Cell Weight Sensor + HX711 Weighing Breakout Board AD Module Pressure Sensors for Arduino DIY Electronic Portable Kitchen Scale (1KG+HX711)
Asin: B08KRV8VYP | Model: AL12392 | PartNumber: AL12392 | Ean: 0701715442146 | UPC: 701715442146
Connection: Red To E+; Black To E-; Green To A+; White To A-..
Instructions: One End Of The Sensor Is Fixed By A Screw Hole, And The Other End Is Left In The Air. Apply Force In The Direction Indicated By The Label. Please Be Careful Not To Directly Press The White Latex Part To Avoid Damage To The Sensor..
Two-Way Optional Differential Input; On-Chip Low-Noise Programmable Amplifier With Selectable Gains Of 64 And 128..
Hx711 Module: A 24-Bit A/D Converter Chip Specially Designed For High-Precision Load Cells..
Features
- Load Cell: Easy to use. With 5-10V driving voltage, the force change is directly output as a voltage signal.
- HX711 module: A 24-bit A/D converter chip specially designed for high-precision load cells.
- Connection: Red to E+; Black to E-; Green to A+; White to A-.
- Two-way optional differential input; On-chip low-noise programmable amplifier with selectable gains of 64 and 128.
- Instructions: One end of the sensor is fixed by a screw hole, and the other end is left in the air. Apply force in the direction indicated by the label. Please be careful not to directly press the white latex part to avoid damage to the sensor.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Weight: 0.04 pounds
Warranty: 3 months
See On Amazon #7
EC Buying HX711 Digital Load Cell Module, Weight Sensor A/D Module with Display 24 Bit Weighing Scale Smart Arduino Load Cell Arduino Display/for Arduino
Asin: B09Z29TK7J | Model: HX711 | PartNumber: HX711
★Temperature Coefficient: ≤100Ppm/℃, ★A/D Conversion Rate: 6.25～100Hz★Measurement Signal Range: ±19Mv.
★Using Temperature Range: -40℃～+70℃; ★Storage Temperature Range: -60℃～+90℃.
★Comprehensive Protection Function: It Has Multiple Protections Such As Anti-Reverse Connection, Anti-Overvoltage, Instantaneous Suppression, Etc..
★Small Size, Engineers Can Carry It With Them, Support Micro Android Interface For Power Supply, ★Built-In Hx711 Chip For Easy On-Site Debugging, ★Send Data Regularly, Or When The Weight Changes.
Features
- Load cell display instrument has the advantages of strong anti-interference ability, powerful function, easy operation, strong versatility, small temperature drift and high linearity, and is suitable for other measurement occasions such as weighing and mechanical strength testing.
- Small size, engineers can carry it with them, support Micro Android interface for power supply, Built-in HX711 chip for easy on-site debugging, Send data regularly, or when the weight changes
- Temperature coefficient: 100ppm/ , A/D conversion rate: 6.25 100Hz Measurement signal range: 19mV
- Comprehensive protection function: It has multiple protections such as anti-reverse connection, anti-overvoltage, instantaneous suppression, etc.
- Using temperature range: -40 +70 ; Storage temperature range: -60 +90
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
Dimensions: 0.47 x 2.16 x 1.38 Inches | Weight: 0.03 pounds
See On Amazon #8
Geekstory 4pcs 50kg Load Cell Half Bridge Strain Gauge Human Body Scale Digital Weighting Sensor + 1pc HX711 AD Amplifier Weight Module for Arduino
Asin: B079FTXR7Y | Model: FZ1802AX4+FZ0728 | PartNumber: FZ1802AX4+FZ0728 | Ean: 0702795764395 | UPC: 702795764395
This Module Uses 24 High Precision A/D Converter Chip Hx711, Specially Designed For The High Precision Electronic Scale.
If You Need Technical Documentation, Please Click “Geekstory‘’To Em-Ail Us.
You Will Receive 4Pcs 50Kg Half-Bridge Load Cell + 1Pc Hx711 Ad Weight Module.
The Sensor Is A Group Of Half-Bridge Strain Gauge, There Are 3 Ways To Use It.
Features
- This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales
- The sensor is a group of half-bridge strain gauge, there are 3 ways to use it
- This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
- You will receive 4pcs 50kg Half-bridge Load Cell + 1pc HX711 AD Weight Module
- If you need technical documentation, please click Geekstory to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Weight: 0.18 pounds
See On Amazon #9
DAOKAI HX711 Weight Sensor ADC Module Kit + Digital Load Cell 5KG for Electronic Scale Also for Arduino, with Scale Display Module, 3.5x1.35mm Power Wire
Asin: B09WVNJJVC | Model: WE-DA-032 | PartNumber: WE-DA-032
🔳[Instructions]One End Of The Sensor Is Fixed By A Screw Hole, And The Other End Is Left In The Air.Apply Force In The Direction Indicated By The Label.Please Be Careful Not To Directly Press The White Latex Part To Avoid Damage To The Sensor.
🔳[Package Includes]You Will Get 1 X Weight Sensor 5Kg, 1 X Hx711 24Bit Precision Ad Module, 5 X Nylon Guide Column, 2 X Alec Disc, 2 X M3x10 Screws, 1 X 4Pin Female-Female Dupont Cables, 1 X 3.5Mm X 1.35Mm Power Cable, 1 X Scale Display Module.
🔳[Application]Suitable For Human Body Electronic Scales, Experimental Electronic Scales, Postal Electronic Scales, Kitchen Electronic Scales, Etc..
🔳[Load Cell]4 Leads, Easy To Use, Plus 5-10V Drive Voltage, Direct Output As A Voltage Signal Due To Force Changes. Connect The Load Cells To The Hx711 Module, Red To E+, Black To E-, Green To A+, White To A-.
Features
- [HX711 Module]uses 24 high precision A/D converter chip hx711; On-chip active low noise PGA with selectable gain of 64 and 128
- [Load Cell]4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Connect the load cells to the HX711 module, red to E+, black to E-, green to A+, white to A-
- [Instructions]One end of the sensor is fixed by a screw hole, and the other end is left in the air.Apply force in the direction indicated by the label.Please be careful not to directly press the white latex part to avoid damage to the sensor
- [Application]suitable for human body electronic scales, experimental electronic scales, postal electronic scales, kitchen electronic scales, etc.
- [Package includes]You will get 1 x Weight Sensor 5KG, 1 x HX711 24BIT Precision AD Module, 5 x Nylon Guide Column, 2 x Alec Disc, 2 x M3x10 Screws, 1 x 4PIN Female-FeMale Dupont Cables, 1 x 3.5mm x 1.35mm Power Cable, 1 x Scale Display Module
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #10
WWZMDiB 1KG/5KG/10KG/20KG Load Cell Amplifier+HX711 24-Bit ADC Weighing Sensor Module Used to Measure Force, Pressure, Displacement, Strain, Torque, Acceleration. (5KG)
Asin: B0BLNQVY2X | Model: HX711 | PartNumber: HX711 | Ean: 0618202521102 | UPC: 618202521102
🥇This Module Uses 24 High Precision A/D Converter Chip Hx711..
🥉Support Widely Used In Aerospace, Mechanical, Electrical, Chemical, Construction, Medicine And Many Other Fields.
🥈The Hx711 Uses A Two Wire Interface (Clock And Data) For Communication. Any Microcontroller’S Gpio Pins Should Work And Numerous Libraries Have Been Written Making It Easy To Read Data From The Hx711..
⚡【Voltage】：2.6 ~ 5.5V.
Features
- HX711 Weighing Sensor Module+1KG/5KG/10KG/20KG Load Cell Amplifier : used to measure force, pressure, displacement, strain, torque, acceleration.
- Voltage 2.6 ~ 5.5V
- This module uses 24 high precision A/D converter chip hx711.
- The HX711 uses a two wire interface (Clock and Data) for communication. Any microcontroller s GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711.
- Support Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
Dimensions: 0.04 x 0.04 x 0.04 Inches
See On Amazon #11
ATO Load Cell Amplifier with Digital Readout, Load Cell Display Controller Indicator Load Cell Amplifier with Read Out, 4-20mA Output
Asin: B08CMF1VDG | Ean: 0783902770935 | UPC: 783902770935
【Output Readout】The Digital Load Cell Controller Can Be Set Up To Different Units, Including Kg, G, Ton, And Newtons.
【Customer Service】If You Are Not Sure About The Size Or Have Any Issue About The Product Or Service, Please Don't Hesitate To Email Us. We Will Answer You Within 12H.
【Parameter Setting】There Are 3 Keys For Parameter Settings, The Load Cell Indicator Can Be Calibrated On-Line By Its 3 Keys, The Setting Parameters Include Zero, Capacity, Communication Rate, Division Value, Decimal Digits, Etc..
【Standard Signal】Accuracy ±0.2%Fs , Input Signal 0~±20Mv, Output Signal: 4-20Ma.
Features
- Digital Dispaly ATO load cell amplifier with 6-digit LED screen, it can directly show the readings of load cells
- Standard signal Accuracy 0.2%FS , input signal 0~ 20mV, output signal: 4-20mA
- Output Readout The digital load cell controller can be set up to different units, including kg, g, ton, and newtons
- Parameter Setting There are 3 keys for parameter settings, the load cell indicator can be calibrated on-line by its 3 keys, the setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.
- Customer Service If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h
- See more on Amazon...
Brand: ATO.COM | Manufacturer: ATO
See On Amazon #12
ShangHJ 20kg Digital Load Cell Weighing Sensor + HX711 AD Weighit Amplifier Module Pressure Sensor for Arduino DIY Portable Electronic Kitchen Scale Kit (20kg, HX711)
Asin: B09NNYFY3F | Model: S18+S19- | PartNumber: S18+S19- | Ean: 0736140514755 | UPC: 736140514755
✅Load Cell: 4 Leads, Easy To Use, Plus 5-10V Drive Voltage, Direct Output As A Voltage Signal Due To Force Changes. Works For Arduino And Raspberry Pi.
✅The Hx711 On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
✅This Hx711 Module Uses 24 High Precision A/D Converter Chip Hx711. It Is A Specially Designed For The High Precision Electronic Scale Designwith Two Analog Input Channelthe Internal Integration Of 128 Times The Programmable Gain Amplifier.
✅You Need To Connect Load Cell With Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- The Load Cell maximum measures force: 20kg (44lb)
- You need to connect load cell with HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier
- The HX711 On-chip active low noise PGA with selectable gain of 3264 and 128
- See more on Amazon...
Brand: ShangHJ | Manufacturer: ShangHJ
See On Amazon #13
Digital Load Cell Weight Sensor - 4 Sets 1KG Load Cell HX711 AD Weighit Amplifier Module Pressure Sensor Ar duino Load Cell Amplifier HX711 AD Converter Breakout Module for Ar duino Scale
Asin: B0BG59SWLZ
The Hx711 Module Adopts A 24-Bit High-Precision A/D Conversion Chip Hx711; Hx711 Is An Internal Integrated 128-Fold Programmable Gain Amplifier With Two Analog Input Channels Designed For High-Precision Electronic Scales.
"Simple Digital Control And Serial Interface: Pin Drive Control, No Programming Required, Selectable 10Sps Or 80Sps Output Data Rate. 6. Load Cell - Rugged Aluminum Alloy Construction With Strain".
Precautions: One End Of The Sensor Is Fixed Through The Screw Hole, And The Other End Is Kept In A Suspended State, And Gravity Is Applied In The Direction Indicated By The Label. Special Attention Must Be Paid Not To Directly Press The White Glue-Coated Part, So As Not To Damage The Sensor.
Wiring Method: Power Positive (E+) Red, Power Negative (E-) Black, Signal Positive (S+) Green, Signal Negative (S-) White.
Features
- Simple operation: the maximum measuring force of the load cell: 1kg (2.2lb), four leads, easy to use, add 5-10V driving voltage, the force change is directly output as a voltage signal
- Wiring method: power positive (E+) red, power negative (E-) black, signal positive (S+) green, signal negative (S-) white
- The HX711 module adopts a 24-bit high-precision A/D conversion chip hx711; HX711 is an internal integrated 128-fold programmable gain amplifier with two analog input channels designed for high-precision electronic scales
- Precautions: One end of the sensor is fixed through the screw hole, and the other end is kept in a suspended state, and gravity is applied in the direction indicated by the label. Special attention must be paid not to directly press the white glue-coated part, so as not to damage the sensor
- Simple digital control and serial interface: pin drive control, no programming required, selectable 10SPS or 80SPS output data rate. 6. LOAD CELL - Rugged aluminum alloy construction with strain
- See more on Amazon...
Brand: MakerHawk | Manufacturer: MakerHawk
See On Amazon #14
DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microcontroller
Asin: B010FG9RXO | Model: FBA_FZ0728X2 | PartNumber: FBA_FZ0728X2 | Ean: 0702795763015 | UPC: 702795763015
High Precision Electronic Scale Designwith Two Analog Input Channelthe Internal Integration Of 128 Times The Programmable Gain Amplifier..
What You Will Get Is: 2 X Hx711 Weight Sensor Ad Module.
High Precisionlow Cost,It Is An Ideal Sampling Front-End Module..
This Weighing Sensor Amplifier Module Can Use To Be Weight Scales, Kitchen Scale, Industrial Process Control Etc..
Features
- This HX711 amplifier module uses 24 high precision A/D converter chip hx711,2 selectable differential input channels.
- This weighing sensor amplifier module can use to be weight scales, kitchen scale, industrial process control etc.
- High precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
- High precisionlow cost,it is an ideal sampling front-end module.
- What you will get is: 2 X HX711 weight sensor AD module
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
Dimensions: 1.18 x 1.18 x 0.39 inches | Weight: 0.01 pounds
See On Amazon #15
Weighing Scale Load Cell Amplifier Current Converter Weight Transmitter 24Vdc Supply 0-5V 0-10V 4-20mA Output JY-S60 (Upgraded JY-S85E5-10V-1-3MV/V)
Asin: B091C249BM | Model: JY-S60 JY-S85 | PartNumber: JY-S60 JY-S85 | Ean: 0727196372185 | UPC: 727196372185
Brand: Calt | Manufacturer: CALT
Dimensions: 3.54 x 5.91 x 7.87 Inches | Weight: 300.00 Grams
See On Amazon #16
Load Cell Amplifier - HX711
Asin: B00NPZ4CPG | Model: SEN-13879 | PartNumber: SEN-13879 | Ean: 0602401874688, 6955900326450, 7431904726742, 0717520030058 | UPC: 717520030058, 602401874688
Simultaneous 50 And 60Hz Supply Rejection.
Model Number: Sen-13879.
Selectable 10Sps Or 80Sps Output Data Rate.
Features
- Operation Voltage: 2.7V-5V, Operation Current: < 1.5mA
- Selectable 10SPS or 80SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- Model number: SEN-13879
- See more on Amazon...
First Available: 11/04/2016
Brand: SparkFun | Manufacturer: Cool Components
Dimensions: 0.20 x 1.18 x 0.91 inches | Weight: 0.02 pounds
See On Amazon #17
SparkFun Qwiic Scale - NAU7802 Small Breakout board Read load cells accurately No soldering Polarized connector Daisy chain-able Four spring terminal connectors on-chip temperature sensor Operate 3.3v
Asin: B082MPLRCS | Model: SEN-15242 | PartNumber: SEN-15242 | Ean: 0845156009473 | UPC: 845156009473
Operating Voltage: 3.3V (Nau7802: 2.7V-5.5V). 24-Bit Dual-Channel Analog To Digital Converter. Simultaneous 50Hz And 60Hz Rejection. External Differential Reference Voltage Range From 0.1V To 5V..
Low Power Consumption And Programmable Power Management Options. <1Ua Standby Current..
Includes Programmable Gain Amplifier, Programmable Pga Gains From 1 To 128, Programmable Adc Data Output Rates..
By Connecting The Board To Your Microcontroller You Will Be Able To Read The Changes In The Resistance Of A Load Cell And, With Some Calibration, You'll Be Able To Get Very Accurate Weight Measurements..
Features
- Easily read load cells to accurately measure the weight of an object. 2x Qwiic connectors allow you to quickly prototype your project. No soldering required. Polarized connectors so it can t be hooked up wrong and Daisy chain-able.
- By connecting the board to your microcontroller you will be able to read the changes in the resistance of a load cell and, with some calibration, you'll be able to get very accurate weight measurements.
- Operating Voltage: 3.3V (NAU7802: 2.7V-5.5V). 24-bit Dual-Channel Analog to Digital Converter. Simultaneous 50Hz and 60Hz rejection. External differential reference voltage range from 0.1V to 5V.
- Includes Programmable Gain Amplifier, Programmable PGA gains from 1 to 128, Programmable aDC data output rates.
- Low Power Consumption and Programmable Power Management Options. <1uA standby current.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.63 x 1.06 x 1.46 Inches | Weight: 0.02 Pounds
See On Amazon #18
20kg Load Cell, Pressure Sensor 5kg Load Cell and Hx711 Electronic Components Hx711 Load Cell Load Cell Hx711 Used to Measure Force Pressure Displacement Strain Torque Acceleration
Asin: B0C8HC7KH7 | Model: Ymikohe38i27gdb | PartNumber: Ymikohe38i27gdb
High Accuracy: Two Analog Channel Inputs With Integrated 128X Gain Programmable Amplifier. The Input Circuit Can Be Configured Into Bridge Sensor Which Provide Bridge Pressure(Eg, Pressure, Weighing) Sensor Modes, Making It An Ideal High-Accuracy..
Pecification: Sensor Size:34*34Mm/1.34*1.34In
Sensor Inner Construction: 1000Ohm Half-Bridge Strain Gauge
Measuring Range: 50Kg/100Kg/200Kg..
Product: The Sensor Is A Set Of Half-Bridge Strain Gauge Which Is Equipped With Three Using Modes. The Weighting Sensor Is Accurate And Sensitive With Small Volume. It Easy To Read Data..
Sensitive: The Weighting Sensor Is Accurate And Sensitive With Small Volume.20Kg Load Cell,5Kg Load Cell And Hx711,Electronic Components,Hx711 Load Cell,Load Cell Hx711..
Features
- Three Using Modes: The weighting sensor is accurate and sensitive with small volume, the sensor is a set of half-bridge strain gauge which has three using modes.The weighting sensor is accurate and sensitive with small volume.
- Sensitive: The weighting sensor is accurate and sensitive with small volume.20kg load cell,5kg load cell and hx711,Electronic components,hx711 load cell,load cell hx711.
- High Accuracy: Two analog channel inputs with integrated 128x gain programmable amplifier. The input circuit can be configured into bridge sensor which provide bridge pressure(eg, pressure, weighing) sensor modes, making it an ideal high-accuracy.
- Product: The sensor is a set of half-bridge strain gauge which is equipped with three using modes. The weighting sensor is accurate and sensitive with small volume. It easy to read data.
- Pecification: Sensor Size:34*34mm/1.34*1.34in
Sensor Inner Construction: 1000ohm half-bridge strain gauge
Measuring Range: 50kg/100kg/200kg. - See more on Amazon...
Brand: Ymiko | Manufacturer: Ymiko
See On Amazon #19
Treedix Load Cell Amplifier HX711 Small Breakout Board Load Sensor Combinator with 4pcs Load Cell 50KG Weight Weighing Load Cell Conversion Module Sensor DIY Kits for Arduino
Asin: B0B1T5FVZ8 | Model: TRX5-0319 | PartNumber: TRX5-0319 | Ean: 0741754906247 | UPC: 741754906247
We Separated The Analog And Digital Power And Added A 3.3Uh Inductor And A 0.1Uf Filter Capacitor For Digital Power.
The Load Cells Use A Four-Wire Wheatstone Bridge Configuration To Connect To The Hx711. These Colors Are Usually Red, Black, White, Grn, Ylw..
The Default Output Data Rate Is 80Sps, You Can Also Choose 10Sps, Hx711 Uses A Two-Wire Interface (Clock And Data) To Communicate.
By Connecting The Amplifier To Your Microcontroller You Will Be Able To Read The Change In Load Cell Resistance And With Some Calibration You Will Be Able To Get A Very Accurate Weight Measurement..
Features
- This load cell amplifier is a small breakout board for HX711 IC that can easily read the load cell to measure weight. Also included is the Load Sensing Combiner, which works great with our Load Cell Amplifier Breakout Board; the five pins on the edge of the combiner line up directly with the five pins on the amplifier
- By connecting the amplifier to your microcontroller you will be able to read the change in load cell resistance and with some calibration you will be able to get a very accurate weight measurement.
- We separated the analog and digital power and added a 3.3uH inductor and a 0.1uF filter capacitor for digital power
- The default output data rate is 80SPS, you can also choose 10SPS, HX711 uses a two-wire interface (clock and data) to communicate
- The load cells use a four-wire Wheatstone bridge configuration to connect to the HX711. these colors are usually red, black, white, GRN, YLW.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.06 x 1.20 x 0.90 Inches
See On Amazon
Looking For Something Else?
Search