Delta Diamond Extreme 14-Inch Metal Cutting Diamond Blade, 140 Wide X 1" Arbor with 20MM Bushing, Heavy-Duty All Purpose Cut Off Wheel for Rebar, Steel, Sheet Metal, Angle Iron, Stainless Steel (14")
Asin: B079VTB5W9 | Ean: 0040232188725 | UPC: 040232188725
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Constant Cutting Depth & Safer - Abrasive Discs Wear Down And Will Shrink Which Can Be Dangerous. Diamond Extreme Maintains A Constant Cutting Depth, Giving You The Maximum Cutting Depth Throughout The Life Of The Blade. The Steel Core Makes The Blade Much Safer To Use And Produces Far Fewer Sparks And Dust. Commonly Used By Fire Departments For Fire/Rescue Situations Across The Country..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - 14" Diameter X .140 Thick With A 1" Arbor. Included Preinstalled 20Mm Bushing For Adapting To Just About Any Hand Held Power Saw Or Cut Off Saw. The Maximum Safe Operating Speed Is 5,460 Rpm..
Lasts 100X Longer - A Single Diamond Extreme Blade Outlasts And Out Performs Up To 100 Abrasive Cut-Off Wheels. Save Time By Using One Blade Without Having To Constantly Put On A New Disc After A Few Cuts. Diamond Extreme Blades Use A Heavy-Duty Vacuum Brazed Diamond Bonded Segment And Will Not Wear Out As Fast As Other Diamond Discs..
Features
- HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more.
- LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs.
- CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country.
- SPECIFICATIONS - 14 diameter X .140 thick with a 1 arbor. Included preinstalled 20MM bushing for adapting to just about any hand held power saw or cut off saw. The maximum safe operating speed is 5,460 RPM.
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
Dimensions: 0.20 x 14.00 x 14.00 inches
See On Amazon Similar To Delta Diamond Extreme 14Inch Metal
#1
Lenox Tools METALMAX Cut Off Wheel, Diamond Edge, 14-Inch x 1-Inch (1972932)
Asin: B01HSJ1NSI | Model: 1972932 | PartNumber: 1972932 | Ean: 0885363171808 | UPC: 885363171808
Solid Steel Wheel Body Greatly Reduces Risk Of Breakage For Added Safety.
Recommended For Steel, Sheet Metal, Stainless Steel, Rebar, Cast Iron, Aluminum And Non-Ferrous Metals.
Diamond Construction Maintains Original Wheel Diameter And Cutting Depth Throughout The Life Of The Blade For Better Control, Reach, And Precision.
Advanced Diamond Technology Provides Extreme Durability In Metal Cutting Applications, For Increased Productivity, Reduced Downtime, And A Lower Cost Per Cut Compared To Thin Bonded Cutoff Wheels.
Features
- Delivers 1,000 or more cuts without changing the wheel and 30X longer life than thin bonded cutoff wheels
- Advanced diamond technology provides extreme durability in metal cutting applications, for increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels
- Solid steel wheel body greatly reduces risk of breakage for added safety
- Diamond construction maintains original wheel diameter and cutting depth throughout the life of the blade for better control, reach, and precision
- Recommended for steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals
- See more on Amazon...
Brand: Lenox | Manufacturer: Lenox Tools
Dimensions: 3.50 x 16.50 x 16.10 inches | Weight: 3.21 pounds
See On Amazon #2
Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting Concrete, Block, Paver, Brick, Wet/Dry, 1"-20mm Arbor (14" 3pcs)
Asin: B07SPFB4QP
Wet Or Dry Cutting - The Center Core Is Made From Tensioned, Heat-Treated Hi-Speed Steel And Is Guaranteed To Withstand The Demands Of Dry Cutting..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - 3-Pack Of 14" Diameter X .125 Thick X 1" Arbor Hole With A 20Mm Bushing. 3/8" Drive Pin Hole. Max 5,460 Rpm. For Use With Hand-Held Power Saws, 5-20 Hp Concrete Saws, Or Masonry Saws..
Premium Grade 12Mm Segments - Made With Premium Grade Diamond Segments Offering 4X Longer Life Compared To Standard Blades With Fast, Smooth Cuts..
Features
- GENERAL PURPOSE - Use for cutting soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials.
- PREMIUM GRADE 12MM SEGMENTS - Made with premium grade diamond segments offering 4x longer life compared to standard blades with fast, smooth cuts.
- WET OR DRY CUTTING - The center core is made from tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.
- SPECIFICATIONS - 3-Pack of 14 diameter X .125 thick X 1 arbor hole with a 20mm bushing. 3/8 Drive pin hole. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws.
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
See On Amazon #3
Delta Diamond Cougar HD 14 Inch 3-Pack Supreme Diamond Saw Blades, 125 X 1"-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/Rebar, Masonry, Stone, Laser-Welded Segmented (14" 3-Pack)
Asin: B07X4ZDTB7
Professional Use - Unique Segment Design Allows For Better Air Cooling And Chip Deflection, Resulting In Better Performance With Less Stress On The Operator And Machine. The 3/8" Core Holes Are Used As Depth Indication As Well As Cooling And Dust/Slurry Removal..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - 3-Pack Of 14" Diameter X .125 (1/8") Thick And Has A 1" Arbor Hole, 3/8" Drive Pin Hole And 20Mm Bushing. Max 5,460 Rpm. For Use With Hand-Held Power Saws Or Walk-Behind Saws Up To 35 Hp. Expected Blade Life Is 6,000 Inch Feet (Inch Foot=12" Long Cut X 1" Depth)..
Use Wet Or Dry - The Core Is Made From Heat-Treated Hi-Speed Steel And Is Guaranteed To Withstand The Demands Of Dry Cutting. Use Wet To Keep Dust Down..
Features
- SUPREME GENERAL PURPOSE - Cougar HD Supreme Concrete Saw Diamond Blades have laser-welded, extra tall 12MM hard bond segments which is perfect for general purpose cutting of reinforced cured concrete with rebar, masonry, brick, block, and stone.
- USE WET OR DRY - The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. Use wet to keep dust down.
- PROFESSIONAL USE - Unique segment design allows for better air cooling and chip deflection, resulting in better performance with less stress on the operator and machine. The 3/8 core holes are used as depth indication as well as cooling and dust/slurry removal.
- SPECIFICATIONS - 3-Pack of 14 diameter X .125 (1/8) thick and has a 1 arbor hole, 3/8 drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 6,000 inch feet (inch foot=12 long cut X 1 depth).
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
See On Amazon #4
XtremepowerUS Multi-Purpose 14" Diamond Blade Metal Steel Iron Cut Off Saw Wheel Abrasive, 1" Arbor Ultra Fast Cutting Blade
Asin: B084GCZTB4 | Ean: 0812365034954 | UPC: 812365034954
Longer, Faster And Reliably Than Other Blades That May Warp Or Prematurely Wear.
Each Blade Is Engineered To Work At 5,500 Rpm And A Maximum Cutting Depth Of 1" To 1-1/4 Inch Max Rpm: 5,500; Ratio Of 65:1.
Vacuum Brazed Technology For A Longer Life Span And Maintains The Blade's Diameter.
Can Be Used For Ferrous Metals, Iron, Steel, Stainless Steel, Rebar, Copper, And Other High Tensile Alloy.
Features
- Able to cut 2-3 more concrete than lower quality blades dues to Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced cut life, cut rate, cut precision, power demands & heat buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
- Can be used for ferrous metals, iron, steel, stainless steel, rebar, copper, and other high tensile alloy
- Longer, Faster and Reliably than other blades that may warp or prematurely wear
- Vacuum brazed technology for a longer life span and maintains the blade's diameter
- Each blade is engineered to work at 5,500 RPM and a maximum cutting depth of 1 to 1-1/4 inch Max RPM: 5,500; Ratio of 65:1
- See more on Amazon...
Brand: XtremepowerUS | Manufacturer: XtremepowerUS
Dimensions: 0.10 x 13.59 x 13.80 inches | Weight: 2.00 pounds
See On Amazon #5
Delta Diamond Cougar S 14 Inch 10 Pack Premium Diamond Saw Blade, 125 X 1"-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/Rebar, Masonry, Stone, Laser-Welded Segmented (14" 10 Pack)
Asin: B0CW2CX8LW
Premium Turbo Segments - Alternating Notched Turbo Diamond Segments Cut Through Material With Greater Efficiency Than All Flat, Smooth Segments. The Result Is A Concrete Cutting Blade That Cuts Fast And Straight With Minimal Stress On The Operator And Machine..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - 10 Pack Of 14" Diameter X .125 (1/8") Thick And Has A 1" Arbor Hole, 3/8" Drive Pin Hole And 20Mm Bushing. Max 5,460 Rpm. For Use With Hand-Held Power Saws Or Walk-Behind Saws Up To 35 Hp. Expected Blade Life Is 8,000 Inch Feet (Inch Foot=12" Long Cut X 1" Depth)..
Use Wet Or Dry - Use Cougar S 14" Diamond Blades Wet Or Dry. The Center Core Is Made From Heat-Treated High-Speed Steel And Is Guaranteed To Withstand The Demands Of Dry Cutting..
Features
- FAST CUTTING - Features a soft bond for extra fast cutting speed! Easily and effortlessly cuts reinforced concrete (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials.
- USE WET OR DRY - Use Cougar S 14 diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting.
- PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine.
- SPECIFICATIONS - 10 Pack of 14 diameter X .125 (1/8) thick and has a 1 arbor hole, 3/8 drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 8,000 inch feet (inch foot=12 long cut X 1 depth).
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
See On Amazon #6
XtremepowerUS 14" Multi-Purpose Diamond Blade Metal Steel Iron Cut Off Saw Wheel Abrasive Fast Cutting Blade
Asin: B09KMG2184 | Ean: 0840166524305 | UPC: 840166524305
Can Be Used For Ferrous Metals, Iron, Steel, Stainless Steel, Rebar, Copper, And Other High Tensile Alloy.
Each Blade Is Engineered To Work At 5,500 Rpm And A Maximum Cutting Depth Of 1" To 1-1/4 Inch Max Rpm: 5,500; Ratio Of 65:1.
Vacuum Brazed Technology For A Longer Life Span And Maintains The Blade's Diameter.
Longer, Faster And Reliably Than Other Blades That May Warp Or Prematurely Wear.
Features
- Able to cut 2-3 more concrete than lower quality blades dues to Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced cut life, cut rate, cut precision, power demands & heat buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry
- Longer, Faster and Reliably than other blades that may warp or prematurely wear
- Can be used for ferrous metals, iron, steel, stainless steel, rebar, copper, and other high tensile alloy
- Vacuum brazed technology for a longer life span and maintains the blade's diameter
- Each blade is engineered to work at 5,500 RPM and a maximum cutting depth of 1 to 1-1/4 inch Max RPM: 5,500; Ratio of 65:1
- See more on Amazon...
Brand: XtremepowerUS | Manufacturer: XtremepowerUS
Dimensions: 16.50 x 30.00 x 10.00 inches | Weight: 2.00 pounds
See On Amazon #7
Delta Diamond Mad Dog HS 14 Inch 3 Pack Segmented Diamond Saw Blade, 125 X 1"-20mm Arbor, Made in USA, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (14" 3pcs)
Asin: B0855SFQN7
Heavy Duty General Purpose - Great For Harder Materials Or When You Want A Blade That Lasts. Mad Dog Hs Premium Blades Last Longer And Cut Faster Than Standard Blades..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - Made In Usa. 3 Pack Of 14" Diameter X .125 Thick With A 1" Arbor Fits Most Masonry Saws And Hand-Held Saws. Preinstalled 20Mm Bushing For Adapting To Other Power Saws. Drive Pin Hole For Walk-Behind / Self-Propelled Saws From 8-24Hp. The Maximum Safe Operating Speed Is 5,460 Rpm..
Wet Or Dry - Use Dry Or Wet On Cured Concrete, Masonry, Brick, Block, Roofing Tile, Stone, Pavers, Slate, Terrazzo, And Similar Materials..
Features
- PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength.
- WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials.
- HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades.
- SPECIFICATIONS - Made in USA. 3 Pack of 14 diameter X .125 thick with a 1 arbor fits most masonry saws and hand-held saws. Preinstalled 20mm bushing for adapting to other power saws. Drive pin hole for walk-behind / self-propelled saws from 8-24hp. The maximum safe operating speed is 5,460 RPM.
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
See On Amazon #8
SHDIATOOL Diamond Metal Saw Blade 14 inch for Steel Tube Iron Rebar Angle Steel Vacuum Brazed Cut-Off Wheel 350mm
Asin: B0B4DR25LY | Model: B0B4DR25LY_CA NARF | PartNumber: B0B4DR25LY_CA NARF
More Efficient Than Regular Abrasive Disc.
No Risk Of Break Of Disc,So Much Safer Than Abrasive Cut-Off Wheel.
Much Longer Working Life And Performance (More Than 30Pcs Abrasive Wheel).
Cutting Steel Tube, Iron Rebar (Less Than Dia 25Mm), Angle Steel.
Features
- 1 With 25.4mm bore, For 1 Inch arbor, diamond thickness 3.2MM
- Cutting steel tube, iron rebar (Less than dia 25mm), angle steel
- More efficient than regular abrasive disc
- Much longer working life and performance (more than 30pcs abrasive wheel)
- No risk of break of disc,so much safer than abrasive cut-off wheel
- See more on Amazon...
Brand: SHDIATOOL | Manufacturer: SHANGHAI DIATOOL CO., LTD.
See On Amazon #9
Delta Diamond CougarX 14 Inch X .375" Wide Diamond Saw Blade, 1"-20mm Arbor, General Purpose Extra Thick Segments for Concrete, Asphalt, Stone (14" X .375)
Asin: B08KWT6Y8T
General Purpose - Cougarx Blades May Be Used With Hand-Held Power Saws, 5-20 Hp Concrete Saws And Masonry Saws..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - 14" X .375 X 1"-20Mm Arbor. Heat Treated Steel Core. Laser-Welded. Max. 5,460 Rpm. Expected Blade Life Is Approx. 6,000 Inch Feet (1 Inch Foot = 12" Length X 1" Depth)..
Extra Wide Segments - .375" Wide Segments (3/8") Are Commonly Used For Cutting Grooves For Traffic Loops, Detector Loops In Factory Floors Or For Burying Power Lines..
Features
- USE WET OR DRY - This high-efficiency wet/dry diamond blade can be used on a wide range of materials including concrete (up to 6,000 psi) masonry, asphalt, and hard stone such as quartzite.
- EXTRA WIDE SEGMENTS - .375 wide segments (3/8) are commonly used for cutting grooves for traffic loops, detector loops in factory floors or for burying power lines.
- GENERAL PURPOSE - CougarX blades may be used with hand-held power saws, 5-20 hp concrete saws and masonry saws.
- SPECIFICATIONS - 14 X .375 X 1-20mm Arbor. Heat treated steel core. Laser-welded. Max. 5,460 rpm. Expected blade life is approx. 6,000 inch feet (1 inch foot = 12 length X 1 depth).
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
See On Amazon
Looking For Something Else?
Search