GLM 13992 Drain Plug Assembly
Asin: B079X4ZFX6 | Model: 13992 | PartNumber: 13992 | Ean: 0754739139929 | UPC: 754739139929
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.For Use In Marine Environments.
Refer To Manufacturer Recommendations For Proper Fit/Installation Information.
Replacement Drain Plug Assembly.
Made Of Quality Materials.
Features
- For use with OMC manifolds
- Made of quality materials
- For use in marine environments
- Replacement drain plug assembly
- Refer to manufacturer recommendations for proper fit/installation information
- See more on Amazon...
Brand: GLM | Manufacturer: GLM
Dimensions: 0.50 x 6.00 x 1.50 inches | Weight: 0.10 Pounds
See On Amazon Similar To GLM 13992 Drain Plug Assembly
#1
Gearcase Drain Plug Seal, Lower Unit Drain Plug Seal Washer Gaskets 10Pcs 3/8 -16 Oil Drain Plug Seal Washers Compatible with Most Mercury/Mariner Outboards and Mercruiser
Asin: B0C27LTPG2 | Model: well-pslsdq-10pcs | PartNumber: well-pslsdq-10pcs
These Outboard Lower Unit Washers Are An Excellent Way To Seal Drain Plugs And Can Go A Long Way Towards Solving The Problem Of Gear Oil Leaks. Simply Replace These Outboard Drain Plug Seals Every Time You Drain And Refill Your Lower Unit Oil, Which Not Only Maintains A Good Seal For A Long Time, But Also Makes It Easier To Get The 3/8”-16 Screws Out At The Next Oil Change..
There Are 10 Blue Seals In The Package, Which Are Perfect Replacements For The Original Yellow And Red Seals, Enough To Meet Your Replacement Needs For 2-3 Times..
These 3/8”-16 Oil Drain Plug Screw Gaskets Are Made Of High Quality Non-Asbestos Sealing Material, Which Is More Impermeable Than Ordinary Seals And Can Prevent The Gear Oil From Leaking Out. In Addition, These Outboard Lower Units Fill And Drain Plugs Gaskets Have High Strength And Corrosion Resistance, And Will Not Be Broken By Corrosion In Seawater, So They Can Maintain A Strong Seal For A Long Time..
These Oil Drain Plug Gaskets For Mercury Marine Can Only Be Used With 3/8"-16 Drain Screws In Outboard And Sterndrive Gearcase. Note: Make Sure These Lower Unit Seal Is Secured In The Correct Position When Re-Mounting The Drain Screw To Avoid Water Penetration Damage To The Gearcase..
Features
- Compatibility: These lower unit drain and fill screws gaskets are compatible with most Mercury/Maruner outboards and all mercruiser models, including Mercury Marine 12-19183 & 12-191832 12-191833, Mallory Marine 9-60101 & 9-60102, Sierra Marine 18-2945 & 18-2244, SEI Marine 98-102-09, OBR Red Rhino MR-103, GLM 31170. Note: Not compatible with the Japanese model
- These oil drain plug gaskets for Mercury Marine can only be used with 3/8-16 drain screws in outboard and sterndrive gearcase. Note: Make sure these lower unit seal is secured in the correct position when re-mounting the drain screw to avoid water penetration damage to the gearcase.
- These outboard lower unit washers are an excellent way to seal drain plugs and can go a long way towards solving the problem of gear oil leaks. Simply replace these outboard drain plug seals every time you drain and refill your lower unit oil, which not only maintains a good seal for a long time, but also makes it easier to get the 3/8 -16 screws out at the next oil change.
- These 3/8 -16 oil drain plug screw gaskets are made of high quality non-asbestos sealing material, which is more impermeable than ordinary seals and can prevent the gear oil from leaking out. In addition, these outboard lower units fill and drain plugs gaskets have high strength and corrosion resistance, and will not be broken by corrosion in seawater, so they can maintain a strong seal for a long time.
- There are 10 blue seals in the package, which are perfect replacements for the original yellow and red seals, enough to meet your replacement needs for 2-3 times.
- See more on Amazon...
Brand: Yncotte | Manufacturer: Yncotte
See On Amazon #2
Stainless Steel Magnetic Oil Drain Plug, Suitable for M12 1.5 Models
Asin: B09PFWQS12 | Ean: 0767065500837 | UPC: 767065500837
Useful: High Strength Neodymium Magnet Of Magnetic Drain Plug Is To Keep Harmful Metal Shaving Out Of Your Engine. These Plugs Have An Incredibly Strong Magnet To Help Gather This Debris Directly Out Of Your Oil During Operation..
Includes: 1Pcs Oil Drain Plug Made Of Premium Stainless Steel With Magnet, 1Pcs Washer Made Of Copper..
Material: Made Of Premium Stainless Steel And Magnet..
Applicable Models: Suitable For Toyota Or 14*1.5 Models..
Features
- Easy to install: Our plug will be installed in the position of your current drain plug. When it comes time to change your oil, just clean off the magnetic end and reused it.
- Applicable models: Suitable for Toyota or 14*1.5 models.
- Useful: High strength neodymium magnet of magnetic drain plug is to keep harmful metal shaving out of your engine. These plugs have an incredibly strong magnet to help gather this debris directly out of your oil during operation.
- Material: Made of premium stainless steel and magnet.
- Includes: 1pcs oil drain plug made of premium stainless steel with Magnet, 1pcs washer made of copper.
- See more on Amazon...
Brand: Upstream | Manufacturer: TongHe Auto parts Co., Ltd
Dimensions: 1.00 x 2.00 x 0.60 inches
See On Amazon #3
Marine Outdrive Gear Case Drain Plug Seal Magnetic Screw & Gasket 22-8M0058389 for Mercruiser Mercury Johnson
Asin: B0CMXDFS42 | Model: 22-8M0058389 | PartNumber: 22-8M0058389 | Ean: 0719081638506 | UPC: 719081638506
Professional Mfg; High Quality Material; Easy Installation.You Might Be Able To Fix Your Problem Without Visiting Your Local Auto Shop, Saving Both Time And Money..
For Any Reason, If You Are Not Satisfied With Your Purchase, Please Contact Us Directly. We Offer A Year's Guarantee..
Compatible With Mercruiser/Mercury 10-14834 10-14834A1 22-67892 22-67892A06 22-8M0058389 22-67892A1 Chrysler 2267892A1 22-67892Glm 21731 Mallory 9-72651.
Features
- Made of high quality 304 Stainless Steel, Excellent in tensile strength and corrosion resistance.
- Compatible With Mercruiser/Mercury 10-14834 10-14834A1 22-67892 22-67892A06 22-8M0058389 22-67892A1 Chrysler 2267892A1 22-67892GLM 21731 Mallory 9-72651
- Professional MFG; High quality material; Easy installation.You might be able to fix your problem without visiting your local auto shop, saving both time and money.
- For any reason, if you are not satisfied with your purchase, please contact us directly. We offer a year's guarantee.
- See more on Amazon...
Brand: RARAYC | Manufacturer: RARAYC
Warranty: 1 year
See On Amazon #4
26-830749 Gearcase Lube Drain Screw Washer Gearcase Drain Plug Seal Fit for Mercury 115FS 150 EFI Four Stroke and Mariner Outboards and MerCruiser Stern Drives (6 PACK)
Asin: B0D21R1TRW | Model: 830749 | PartNumber: 830749
Made Of High Quality Gb/T 23261 Standard Material With Rubber Coated, Prevent Gear Oil Leaking..
Package Content: 6 Pack Grease Gaskets.
Fit On Mercury And Mariner Outboards And All Mercruiser Stern Drives With 3/8-16 Gearcase Drain/Fill Screw Holes..
Features
- Fit on the 3/8-16 drain/fill screw holes in outboard and stern drive gearcases.
- Fit on Mercury and Mariner outboards and all MerCruiser stern drives with 3/8-16 gearcase drain/fill screw holes.
- Made of high quality GB/T 23261 Standard material with rubber coated, prevent gear oil leaking.
- Package Content: 6 Pack Grease Gaskets
- See more on Amazon...
Brand: DSkoiph | Manufacturer: DSkoiph
Warranty: 1 YEAR
See On Amazon #5
MARKGOO Drain Plug Seal Gasket 6 Pack Gearcase Lube Drain Screw Washer Used on 3/8-16 Drain Fill Screws Replacement for Mercury Mariner Outboard and MerCruiser Stern Drive 83079 8M0204693 26-830749
Asin: B0CQMZNXXB | Model: 26-830749 Drain Plug Gasket | PartNumber: 26-830749 Drain Plug Gasket
Always Double Check To Make Sure The Washer Has Been Secured When Reinstalling The Drain Screw. Water Could Infiltrate The Gearcase Without It And Cause Catastrophic Damage To The Gearcase..
Change This Every Time You Change Your Gearcase Oil. It’S Designed To “Crush” Under Torque So It’S A One Time Use Washer. Replacement Gaskets For The Mercury's Lower Unit Drain And Vent Plugs..
Keep Spares On Hand To Assure Placement After Changing Gear Lube In Gearcase.This Is The Exact Seal For Its Gearcase Drain, Filler, And Vent Screws..
Gearcase Gear Lube Drain Screw Washer 830749 Is Made Of High Quality Material With Rubber Coated Stainless Steel That Fits For All Of Mercury, Mariner Outboards And Mercruiser Stern Drives With 3/8-16 Gearcase Drain/Fill Screw Holes, Prevent Gear Oil Leaking..
Features
- It's used on the 3/8-16 drain/fill screw holes in outboard and stern drive gearcases.
- Gearcase gear lube drain screw washer 830749 is made of high quality material with rubber coated stainless steel that fits for all of Mercury, Mariner outboards and MerCruiser stern drives with 3/8-16 gearcase drain/fill screw holes, prevent gear oil leaking.
- Always double check to make sure the washer has been secured when reinstalling the drain screw. Water could infiltrate the gearcase without it and cause catastrophic damage to the gearcase.
- Keep spares on hand to assure placement after changing gear lube in gearcase.This is the exact seal for its gearcase drain, filler, and vent screws.
- Change this every time you change your gearcase oil. It s designed to crush under torque so it s a one time use washer. Replacement gaskets for the Mercury's lower unit drain and vent plugs.
- See more on Amazon...
Brand: MARKGOO | Manufacturer: MARKGOO
Warranty: 2 year manufacturer
See On Amazon #6
Marine Drain Plug, gasket, washer Replace For Sierra 18-2244 Fit For Mercury, Mercruiser 1, MR, R, Alpha, Alpha 1 Gen 2 Upper & Lower Units, OEM 10-79953A2 10-79953Q2 Drain Screw Drain Screw
Asin: B093G99XTP | Ean: 0641197119443 | UPC: 641197119443
Perfect Fit And Good Quality..
Satisfaction Guarantee--100% Satisfaction Guarantee. Please Feel Free To Contact Us If You Have Any Questions About Our Product..
Good Replacement Part..
High Quality: The Screw Is Made From Steel With Durable And Anti-Corrosion, The Plug Is Made From Rubber With Anti-Corrosion..
Features
- Fit for : MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws.
- High quality: The screw is made from steel with durable and anti-corrosion, the plug is made from rubber with anti-corrosion.
- Perfect fit and good quality.
- Good replacement part.
- Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.
- See more on Amazon...
Brand: Hihitomorrow | Manufacturer: Hihitomorrow
Dimensions: 0.56 x 2.60 x 2.36 inches
See On Amazon #7
Quicksilver 16951Q1 Stern Drive or Inboard Engine Block or Manifold Brass Drain Plug
Asin: B0039065G6 | Model: 16951Q1 | PartNumber: 16951Q1 | Ean: 0745061035799 | UPC: 745061035799
Replaces Worn Or Damaged Plugs To Make Winterizing Your Engine Easier.
Easy To Install With Common Tools.
Features
- Machined brass engine block or manifold drain plug with 1/4 in. NPT fitting
- Easy to install with common tools
- Replaces worn or damaged plugs to make winterizing your engine easier
- See more on Amazon...
First Available: 10/24/2018
Brand: Quicksilver | Manufacturer: Quicksilver
Dimensions: 5.00 x 1.75 x 2.00 inches | Weight: 0.12 pounds
See On Amazon #8
BestsQ M13 x 1.25MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool
Asin: B07GCGCZJN | Model: HX3101-A | PartNumber: HX3101-A | Ean: 8002130555254
Ideal For Repairing Sump, Gearbox And Differential Drain Plug Threads..
Contents: Tap: M13*1.25 1Pc, Screw: M13 6Pc, Aluminum Gasket: M13 6Pc.
Suitable For 12Mm Engine Oil Screw After Skidded And Rethread By 13Mm Chaser Then Twist Into 13Mm Screw + Gasket..
Used To Tap The Damaged Thread And Slightly Enlarge The Diameter Of Oil Drain Hole, Then Fit A New Drain Plug And Washer..
Features
- M13 x 1.25MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool
- Used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer.
- Ideal for repairing sump, gearbox and differential drain plug threads.
- Suitable for 12mm engine oil screw after skidded and rethread by 13mm chaser then twist into 13mm screw + gasket.
- Contents: Tap: M13*1.25 1pc, Screw: M13 6pc, Aluminum gasket: M13 6pc
- See more on Amazon...
Brand: Best Q | Manufacturer: ShiQi
Dimensions: 1.18 x 3.94 x 3.54 inches | Weight: 0.55 Pounds
See On Amazon #9
Trail Gear MAGNETIC DRAIN PLUG 140032-1-KIT
Asin: B00HLSK4WS | Ean: 0200887780525, 0070000621758 | UPC: 070000621758, 200887780525
Brand: Trail Gear | Manufacturer: Trail-Gear
See On Amazon #10
UTSAUTO Marine Drain Plug Screw 79953Q04 Lower Unit Oil Drain Plug Screw Fit for Mercury MERCRUISER 10-79953Q2 10-79953A2 18-2244 22420 816610A1 28634 79953 1pc Screw with 2pcs gasket
Asin: B0D1QZCVCG
Easy To Replace, Just Replace The Original Drain Plug Directly..
Package Include 1Pc Marine Drain Plug And 2Pcs Gaskets.
Lower Unit Drain Plug Kit Used With 3/8 - 16 Drain Or Fill Hole Screw Of All For Mercruiser Stern Drives, Mercury And Mariner Outboards Except The Verado Series.
Utsauto Marine Drain Plug Made With High Quality Material,Ensure Long Term Use With No Cracked..
Features
- Replacement number: 79953Q04 10-79953Q2 10-79953A2 18-2244 22420 816610A1 28634 79953
- UTSAUTO Marine drain plug made with high quality material,ensure long term use with no cracked.
- Easy to replace, just replace the original drain plug directly.
- Lower unit Drain Plug kit used with 3/8 - 16 drain or fill hole screw of all for MerCruiser stern drives, Mercury and Mariner outboards EXCEPT The VERADO series
- Package include 1pc Marine drain plug and 2pcs gaskets
- See more on Amazon...
Brand: UTSAUTO | Manufacturer: UTSAUTO
See On Amazon
Looking For Something Else?
Search