CNCTOPBAOS 5 Axis Mach3 Motion Control Card,CNC Stepper Motor Driver Controller Board 15-32V DC,LPT Interface Breakout Board PWM 0-10V for CNC Router Engraving Carving Milling Machine
Asin: B07BFTRTBC | Model: 4V | PartNumber: 4V | Ean: 0785004502858 | UPC: 785004502858
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.♞【5 Input Signal Ports】Set To Limit, Origin, Knife, Start, Stop, Spindle Speed Input, Mpg Input Etc,Communicating With The Host Computer,Which Are Isolated By The Optical Coupling.Among The Optical Coupling Isolation, The P11and P12 Are High-Speed, Which Can Be Used For Connecting Main Shaft Encoder, Or The Same Demanding Signal As Hand Wheel A, B. 12V-Out And 5V-Out Power Output Interface Can Be Used To Pick Some Necessary Power, Such As The Hall Sensor Switch And The Proximity Switch..
♞【3 Relays】There Are 3 Relays, P2, P3 And P4, Which Can Support Mach3 Control Software Programming.The Relay's On Or Off Can Be Controlled Through The Control Of Mach3.The 3 Relays Can Be Used To Control The Opening And Closing Of The Liquid Coolant, Mist Coolant, Liquid State Coolant And So On. They Can Also Be Used To Control The Electromagnetic Valve Device Power Switch. P2 Port Is For The Spindle, P3 Port Is For The Cooling Liquid, P4 Port Can Be Defined..
♞【12 Output Signal Ports】There Are 12 Output Signal, Which Is Allowed To Controlling Output, Supporting As Many As 6 Axis Linkage. Some Of The Output Port Is Reusable Functinality. Meanwhile, One Port Only Can Be Used As One Function;The Circuit Can Output 0-10V Level To Control The Inverter Which Only Has Analog Speed Control In The Market..
♞【Stable Signal】This Control Card Uses A Dedicated High-Speed Chip To Process Input/Output (I/O) Signals, With Signal Correction And Amplification Functions, Making The Machine Work More Stable;The Computer Lpt Port Supplies The Power Individually, Separating From The Power Supply Of Other Parts,The Computer And Machine Tool Isolate Effectively.It Makes The Data More Secure,With Further Insurance Of Security And Stability;.
Features
- 5 Axis Mach3 Control Card This interface board can be connected with the cathode or total output to the stepper drive, or servo drive (servo driver must support the digital signal).The output is the 5V level; Wide input voltage power supply: 15-32V DC.
- Stable signal This control card uses a dedicated high-speed chip to process input/output (I/O) signals, with signal correction and amplification functions, making the machine work more stable;The computer LPT port supplies the power individually, separating from the power supply of other parts,the computer and machine tool isolate effectively.It makes the data more secure,with further insurance of security and stability;
- 5 Input Signal Ports Set to limit, origin, knife, start, stop, spindle speed input, MPG input etc,communicating with the host computer,which are isolated by the optical coupling.Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B. 12V-OUT and 5V-OUT power output interface can be used to pick some necessary power, such as the hall sensor switch and the proximity switch.
- 12 Output Signal Ports There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function;The circuit can output 0-10V level to control the inverter which only has analog speed control in the market.
- 3 relays There are 3 relays, P2, P3 and P4, which can support Mach3 control software programming.The relay's on or off can be controlled through the control of Mach3.The 3 relays can be used to control the opening and closing of the liquid coolant, mist coolant, liquid state coolant and so on. They can also be used to control the electromagnetic valve device power switch. P2 port is for the spindle, P3 port is for the cooling liquid, P4 port can be defined.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon Similar To CNCTOPBAOS 5 Axis Mach3 Motion
#1
CNCTOPBAOS 4 Axis Offline Stand Alone CNC Motion Controller System DDCSV3.1,Servo/Stepper Motor Control Replace Mach3 PLC+100PPR MPG Handwheel with E-Stop for CNC Router Engraving Machine
Asin: B07V6XSCW2 | Ean: 0681385631272 | UPC: 681385631272
♞【Brief Technical Feature】16 Photoelectric Isolated Digital Inputs,3 Photoelectric Isolated Digital Outputs ; Analog Spindle Control 0-10V Spindle Control (Can Be Modified As Pwm Output) ; Arm9 Main Control Chip,Fpga Core Algorithm Chip ; Jog Function For Each Axis (Continuous, Step, Defined Distance) ; Customer Can Define The Distance ; Support Npn Type Limited Switch..
♞【Applications】The Ddcv3.1 Can Be Used For Many Styles And Types Of Cnc Machines. Lathes, Cnc Routers,Pick&Place And Milling Machine,Lathe Machine And Cutters Are Just A Few Examples..
♞【Mpg Handwheel】Mpg Resolution:100 Ppr ; Switch:X1,X10,X100,With Emergency Stop,Led Indicator, With 15-Pin Plug,So It's Play And Plug..
♞【Compatible With G Code Set】5 Inches Tft Screen ; Resolution Ratio: 480X272 ; The Highest Output Pulse Per Axis Is 500Khz. This Provides High Control Precision For Stepper Motors And Servo Motors. All Operations Are Controlled By Only 17 Keys And It Supports The Fanuc With High Universality To Be Compatible With G Code Set,With 4G Usb Flash Disk Support For G Code File Input,No Size Limited Of The G-Code File..
Features
- Brief introduction The DDCSV3.1 is a 4 axis motion controller,the highest output pulse per axis is 500KHz.This provides high control precision for stepper motors and servo motors.The DDCS operates as a stand alone system without the need of a computer, and it needs two 24V DC power supplies.
- Compatible with G code set 5 inches TFT Screen ; Resolution ratio: 480x272 ; the highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors. All operations are controlled by only 17 keys and it supports the FANUC with high universality to be compatible with G code set,with 4G USB flash disk support for G code file input,no size limited of the G-code file.
- Brief technical feature 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs ; Analog spindle control 0-10V spindle control (can be modified as PWM output) ; ARM9 main control chip,FPGA core algorithm chip ; Jog function for each axis (continuous, step, defined distance) ; Customer can define the distance ; Support NPN type limited switch.
- MPG Handwheel MPG Resolution:100 PPR ; Switch:X1,X10,X100,with Emergency stop,LED indicator, with 15-pin plug,so it's play and plug.
- Applications The DDCV3.1 can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine,lathe machine and cutters are just a few examples.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #2
CNCTOPBAOS DDCS Expert CNC 5 Axis Motion Controller System Offline Standalone Servo Stepper Motor Drive Control 1000KHz with 5 Axis MPG Handwheel+M3K Extended Keyboard+2Pcs 75W 24V DC Power Supply
Asin: B09YYG7T3T | Model: 5 Axis DDCS Expert Kit | PartNumber: 5 Axis DDCS Expert Kit
♞【Compatible G Code】Compatible With Standard G-Code,Support Popular Cad/Cam Software, Such As Artcam, Mastercam, Proe, Jdsoft Surfmill, Aspire, Fusion 360 And So On;.
♞【Applications】The Ddcs Expert Can Be Used For Many Styles And Types Of Cnc Machines. Lathes, Cnc Routers,Pick&Place And Milling Machine, Lathe And Cutters Are Just A Few Examples..
♞【Power Supply】Ddcs-Expert Requires Two Power Supplies, The Main Power Supply Is Used For The Controller System, And The Io Port Power Supply Is Used For Input And Output And Mpg Port,Our Parcel Includes 2Pcs 75W 24V Dc Power Supply.
♞【Introduction】Ddcs Expert Supports 5 Axis; 1Mhz 1000Khz Output Frequency For Each Axis; 7 Inch Full Color Display Screen; Resolution Ratio: 1024*600, 40 Operation Keys;It Adopts The Arm+Fpga Design Framework.Arm Controls The Human-Computer Interface And Code Analysis And The Fpga Provides The Underlying Algorithms And Creates The Control Pulse. This Guarantees Reliable Control And Easy Operation.The Internal Operating System Is Linux Based..
Features
- Package includes 1 x 5 Axis CNC Offline Standalone motion controller DDCS-EXPERT;1 x 4GB USB Flash drive;1 x M3K extended keyboard;1x matching cable;1 x USB extension cable;1x 4GB USB flash drive;1 x network cable;2 x 75W 24V DC power supply;1 x 5 Axis MPG Pendant Handwheel with E-Stop
- Introduction DDCS EXPERT supports 5 axis; 1MHz 1000KHz output frequency for each axis; 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys;it adopts the ARM+FPGA design framework.ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation.The internal operating system is Linux based.
- Compatible G Code Compatible with standard G-code,support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
- Power Supply DDCS-EXPERT requires two power supplies, the main power supply is used for the controller system, and the IO port power supply is Used for input and output and MPG port,our parcel includes 2pcs 75W 24V DC power supply
- Applications The DDCS Expert can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine, lathe and cutters are just a few examples.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 8.84 Pounds
See On Amazon #3
CNCTOPBAOS 4 Axis USB Mach3 CNC Controller Kit,Nema23 Stepper Motor Kit,425oz-in 2.8Nm 3A 112mm,DM556S Driver,USB 4-Axis CNC MACH3 Card Motion Control Board,36VDC Power Supply CNC Kit
Asin: B0CCNYVZXS
♞【4 Axis Usb Mach3 Control Board】Usb Interface Is Applicable To Any Netbook, Notebook, Desktop, Tablet And Other Pc Compatible Computers With Usb Interface. This Control Board Does Not Require Any Drivers To Be Installed. As Long As Mach3 Can Run, The Control Card Can Be Used; Support Computer System:Windows 2000/ Xp / Windows 7/8/10; Maximum Step-Pulse Frequency Is 100Khz,Which Is Suitable For The Servo Or Stepping Motor;.
♞【Application】This Cnc Kit Are Widely Used In Engraving Machine, Printer, Medical Equipment, Embroidery Machine, Stage Lighting, Textile Automation, Printing, Packaging And Other Industries Automation Equipment..
♞【36V Dc Power Supply】400W 36V 9.7A Dc Switching Power Supply; Output Voltage:36V ; Input: 110-120V Ac Or 220-240V Ac;Selected By Side Switch To Choose Input Voltage..
♞【Dm556s Stepper Motor Driver】Current: 1.0A-6.0A ; Driver Microstep: 200-51200 Subdivision,Adopts 32-Bit Dsp Digital Processing Technology ; Input Voltage: 20-50V Dc; Due To The Use Of Built-In Micro-Subdivision Technology, Even In The Conditions Of Low Subdivision, But Also Can Achieve High Subdivision Effect, Low, Medium And High-Speed Operation Is Very Smooth, Ultra-Low Noise..
Features
- 23HS2430B Nema23 Stepper Motor Holding Torque: 425oz-in,2.8Nm; Current: 3.0A; Step Angle:1.8 ; Phase:2 ; Shaft: 8mm dual shaft ; Type:Hybrid ; Lead: 4-lead ; Size:57x57x112mm
- DM556S Stepper Motor Driver Current: 1.0A-6.0A ; Driver microstep: 200-51200 subdivision,adopts 32-bit DSP digital processing technology ; Input Voltage: 20-50V DC; Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise.
- 4 Axis USB Mach3 Control Board USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface. This control board does not require any drivers to be installed. As long as Mach3 can run, the control card can be used; Support computer system:Windows 2000/ XP / Windows 7/8/10; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
- 36V DC Power supply 400W 36V 9.7A DC switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC;selected by side switch to choose input voltage.
- Application This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #4
CNCTOPBAOS 5 Axis DDCS Expert CNC Controller System,1000KHz Offline Stand Alone Servo/Stepper Motor Motion Control PLC Replace mach3 for CNC Router Milling Lathe Engraver Machine
Asin: B09WLDLP22 | Model: 5 Axis DDCSE Controller | PartNumber: 5 Axis DDCSE Controller
♞【Compatible G Code】Compatible With Standard G-Code,Support Popular Cad/Cam Software, Such As Artcam, Mastercam, Proe, Jdsoft Surfmill, Aspire, Fusion 360 And So On;.
♞【Applications】The Ddcs Expert Can Be Used For Many Styles And Types Of Cnc Machines. Lathes, Cnc Routers,Pick&Place And Milling Machine, Lathe And Cutters Are Just A Few Examples..
♞【Power Supply】The Power Supply For The Controller Is 24Vdc, Minimum Current Is 0.5A.
♞【Introduction】The Ddcs Expert Numerical Control System Adopts The Arm+Fpga Design Framework. Arm Controls The Human-Computer Interface And Code Analysis And The Fpga Provides The Underlying Algorithms And Creates The Control Pulse. This Guarantees Reliable Control And Easy Operation.The Internal Operating System Is Linux Based..
Features
- Notice If you only select the "5 Axis DDCSE Controller",means the MPG is not included,if you also need a MPG, please select the " 5 Axis DDCSE Controller+6 Axis MPG" Product Model Number:DDCS EXPERT ; Support Axis:5 axis; 1MHz 1000KHz output frequency for each axis; 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys
- Introduction The DDCS Expert numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation.The internal operating system is Linux based.
- Compatible G Code Compatible with standard G-code,support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
- Power Supply The Power Supply for the controller is 24VDC, minimum Current is 0.5A
- Applications The DDCS Expert can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine, lathe and cutters are just a few examples.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 3.53 Pounds
See On Amazon #5
CNCTOPBAOS 4 Axis USB Mach3 Motion Control Card,Red 4-Axis Linkage MACH3 CNC Controller Board,Stepper Motor Driver Control Card 100KHz 4 Inputs Breakout Board for CNC Router Engraving Machine
Asin: B0CFF4YRBN | Model: D-FDK-R | PartNumber: D-FDK-R
♞【Output Signal Ports】Have 0-10V Signal Output,You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps And Other Device;Support For Connecting Electronic Handwheel;Handwheel Interface: 2*5P Row Needle..
♞【Applications】Cnc Router,Milling Machine,Engraving Machine,Carving Machines,Cutting Industry,Medical Equipment,Industrial Equipment And Automation Devices Etc..
♞【Input Signal Ports】4 General-Purpose Inputs, You Can Connect The Limit Switch, Estop Switch, Probe , Back To Zero And Other Device; Need Use External 24V Dc Power Supply To Isolate Usb And External Port, And To Make The System More Stable..
♞【4 Axis Linkage】Support For 4 Axis Linkage, You Can Connect Four Stepper Motor Drives Or Servo Drives; Maximum Step-Pulse Frequency Is 100Khz,Which Is Suitable For The Servo Or Stepping Motor;One Status Led, Indicate Connection Status On The Board..
Features
- 4 Axis USB Mach3 Control Board USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.As long as Mach3 can run,the control card can be used; Support computer system:Windows XP/7/8.
- 4 Axis Linkage Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;One status LED, indicate connection status on the board.
- Output Signal Ports Have 0-10V signal output,you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;Support for connecting electronic handwheel;Handwheel interface: 2*5P row needle.
- Input Signal Ports 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device; Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
- Applications CNC Router,Milling Machine,Engraving Machine,Carving Machines,Cutting industry,Medical equipment,industrial equipment and automation devices etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #6
CNCTOPBAOS 3 Axis USB Mach3 CNC Controller Kit,Nema23 Stepper Motor 425oz.in 3A 112mm,Driver 24-50V DC,4-Axis USB Motion Control Card for Engraving Machine
Asin: B0C53HSJS3 | Model: S3A57USB | PartNumber: S3A57USB
♞【Usb Port Mach3 Motion Control Card】Usb Port,Only Support Mach3 Software,The Motion Control Card For Machine Control, With Strong Professional; 4-Axis Linkage, Maximum Step-Pulse Frequency: 100Khz, Support Connect Four Stepper Motor Drives Or Servo Drives..
♞【Application】This Cnc Kit Are Widely Used In Engraving Machine, Printer, Medical Equipment, Embroidery Machine, Stage Lighting, Textile Automation, Printing, Packaging And Other Industries Automation Equipment..
♞【400W 36V Dc Switching Power Supply】Input Voltage: 110-120V Ac Or 220-240V Ac; Output Voltage: 36V Dc..
♞【Cw5045 Stepper Motor Driver】 Input Voltage: 24-50V Dc; Current: 1.3A-4.5A ; 256 Microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250;.
Features
- Nema23 Stepper Motor 2-Phase Hybrid Nema23 stepper motor 23HS2430B; Holding Torque: 425oz-in.2.8Nm ; Step Angle(degrees):1.8 ; Shaft: 8mm Dual Shaft ; Lead: 4-lead wire; Size: 57x57x112mm.
- CW5045 Stepper Motor Driver Input voltage: 24-50V DC; Current: 1.3A-4.5A ; 256 Microstep: 1 (1.8 ), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250;
- USB Port Mach3 Motion Control Card USB port,only support mach3 software,the motion control card for machine control, with strong professional; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
- 400W 36V DC Switching Power supply Input Voltage: 110-120V AC or 220-240V AC; Output Voltage: 36V DC.
- Application This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #7
CNCTOPBAOS 6 Axis USB Wired Mach3 Handwheel MPG,Remote Hand Control E-Stop,CNC Router Electronic Manual Pulse Generator Controller for CNC Milling Lathe Engraving Machine LHB04B-6
Asin: B0C7VRS34H
♞【Advantages】It Supports Six-Axis Motion Control;Axis Select Band Switch To Achieve The Electronic Hand Wheel Off And The Corresponding X Y Z A B C Each Axis Function Of The Choice Of Control. The Choice Of The Step Distance Value Is Realized By Selecting The Switching Value Band, Which Is Simple And Convenient..
♞【Application】For Windows: All Mach3 Cnc System,Milling Machine,Carving Machine,Wood Machine And So On. Widely Used In Engraving Machines, Advertising Production, Nameplate Production, Mold Production, Cnc Lathes, Cnc Cutting Machines, Etc..
♞【Lcd Display】Real-Time Display X Y Z A B C Axis Of The Mechanical Coordinates And Workpiece Coordinates. Show The Spindle Speed, The Value Of The Feed Rate. Dot Matrix Lcd With Backlight. Axis Selection, Power Band Switch Control.Display Machine Status, Running, Paused, Idle, Step Value..
♞【Functions】 With Handwheel Function,100Ppr Handwheel Pulse Generator Output; Support For Returning To The Origin,Feed Speed Adjustment,Spindle Starting,Spindle Speed Adjustment; Button:16 (10 Custom Buttons); With A Shielded 5-Meter Usb Data Cable,More Fast,Stable And Reliable Signal Transmission..
Features
- Product 6 Axis LHB04B-6 USB Wired Mach3 Handwheel,this is an electronic handwheel designed specifically for the Mach3 motion control system, which integrates common operating functions of Mach3 in addition to traditional electronic handwheel functions; Material: ABS and PC alloy material.
- Functions With handwheel function,100PPR handwheel pulse generator output; Support for Returning to the Origin,Feed Speed Adjustment,Spindle Starting,Spindle Speed Adjustment; Button:16 (10 custom buttons); With a shielded 5-meter USB data cable,more fast,stable and reliable signal transmission.
- Advantages It supports six-axis motion control;Axis select band switch to achieve the electronic hand wheel off and the corresponding X Y Z A B C each axis function of the choice of control. The choice of the step distance value is realized by selecting the switching value band, which is simple and convenient.
- LCD display Real-time display X Y Z A B C axis of the mechanical coordinates and workpiece coordinates. Show the spindle speed, the value of the feed rate. Dot matrix LCD with backlight. Axis selection, power band switch control.Display machine status, running, paused, idle, step value.
- Application For Windows: All Mach3 CNC system,milling machine,carving machine,wood machine and so on. Widely used in engraving machines, advertising production, nameplate production, mold production, CNC lathes, CNC cutting machines, etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon
Looking For Something Else?
Search