Gear Up Guide Bellows Latex Neck Seal for Drysuit Trimmable, Medium / 11.5" - 14.5" Neck
Asin: B07BGTQB2Q | Model: 2017 | PartNumber: 2017
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Replacement Kit Option Includes: All Inclusive Kit Includes: Bellows Neck Seal, Neck Template, Heat Tape, Cleaner, Abrasive Material, Gloves (For Use With Cleaner), Aquaseal And Hardener With Applicator..
Care For Seals: Always Rinse Latex Products With Fresh Water After Each Dive - To Remove Sand And Prevent Salt Crystals To Form. The Best Care For All Latex Products That Are Exposed To Oil And Sweat Is To Wash Thoroughly In Lukewarm Soap Water, Rinse And Dust With Talcum Powder. Avoid Heat And Sunlight Exposure. Store In A Dark And Cool Environ Ment..
To Measure Latex Seal: Take Measurement Around Neck At Widest Point. Make Sure Hair Or Shirt Collar Is Not Under The Measuring Tape. As A General Rule, The Seal Opening Should Be Trimmed To Be No Smaller Than 80% (I.E. Maximum Of 20% Less) Than Your Actual Measurement Of The Relaxed Neck Circumference, Tighter Than That Could Cut Off Blood Flow To Your Brain..
Highly Flexible And Has A Long Lifespan. Manufactured With Quality Latex Rubber Material. Travel Size, Quick, Includes Guided Instructions.
Features
- Can be mounted directly to Drysuit. Can be trimmed to fit. Available as Bellow Neck Seal only or with replacement kit.
- Highly flexible and has a long lifespan. Manufactured with quality Latex rubber material. Travel Size, Quick, Includes guided instructions
- The Replacement Kit option includes: All Inclusive Kit Includes: Bellows Neck Seal, Neck Template, Heat Tape, Cleaner, Abrasive Material, Gloves (for use with cleaner), AquaSeal and Hardener with applicator.
- To Measure Latex Seal: take measurement around neck at widest point. Make sure hair or shirt collar is not under the measuring tape. As a general rule, the seal opening should be trimmed to be no smaller than 80% (i.e. maximum of 20% less) than your actual measurement of the relaxed neck circumference, tighter than that could cut off blood flow to your brain.
- Care for Seals: Always rinse latex products with fresh water after each dive - to remove sand and prevent salt crystals to form. The best care for all latex products that are exposed to oil and sweat is to wash thoroughly in lukewarm soap water, rinse and dust with talcum powder. Avoid heat and sunlight exposure. Store in a dark and cool environ ment.
- See more on Amazon...
Brand: Gear Up Guide | Manufacturer: Gear Up Guide
See On Amazon Similar To Gear Up Guide Bellows Latex
#1
HeuroFosh 45497A1 Exhaust Bellows Expander Tool for Mercury Marine MerCruiser Stern Drive Alpha 1 Bravo 1 and 2 MC-1 R-MR and Blackhawk drive units 8M0096108 Sierra 18-9847
Asin: B0BGQYGW7B | Model: 0901-3271008 | PartNumber: 0901-3271008 | Ean: 0788934576913 | UPC: 788934576913
Replace Part Number: Mercruiser 91-45497A1 91-8M0096108 Glm 90360 Sierra 18-9847 Mallory 79811.
Duratable: Made Of Solid Steel, The Scissor Handle Is With Vinyl Grip And Opens With Screw Lock..
Easy To Use: This Tool Helps You Finish The Work Of Bellow Replacing In Minutes, Simply Install The Bellow On The Gimble Housing Then Stretch The Bellow Though The Exhaust Hole In The Bell Housing And Tighten The Hose Clamp. Note: Sterndrive Must Be Removed In Order To Use This Tool..
Board Application: This Tool Helps You To Install Bellows On Mercruiser Stern Drive Mc-1 Alpha 1 Gen 2 Bravo And Blackhawk Drive Units.
Features
- This bellow expander tool is designed to exchange exhaust bellows MerCruiser SternDrives
- Board application: This tool helps you to install bellows on MerCruiser Stern Drive MC-1 Alpha 1 Gen 2 Bravo and Blackhawk drive units
- Replace Part Number: MerCruiser 91-45497A1 91-8M0096108 GLM 90360 Sierra 18-9847 Mallory 79811
- Easy to Use: This tool helps you finish the work of bellow replacing in minutes, simply install the bellow on the gimble housing then stretch the bellow though the exhaust hole in the bell housing and tighten the hose clamp. Note: Sterndrive must be removed in order to use this tool.
- Duratable: Made of solid steel, the scissor handle is with vinyl grip and opens with screw lock.
- See more on Amazon...
Brand: Heurofosh | Manufacturer: HeuroFosh Marine & Outdoor Products Center
Weight: 1.32 Pounds
Warranty: 180 days
See On Amazon #2
Bellow Retainer Ring Install Tool for Alpha 1 Gen 2, Bravo and Blackhawk U-Joint Bellows Replaces Mercruiser 91-818162, Merc
Asin: B08H1M2RP1 | Model: 91-818162 | PartNumber: 91-818162 | Ean: 0641197094979, 0641197088473 | UPC: 641197094979, 641197088473
Direct Replacement: Aftermarket For Sierra # 18-9870, Mercury / Mercruiser 91-818162.
Satisfaction Guarantee: Yoursme Aims To Provide The Best Service For Our Customer, If You're Not 100% Satisfied With Our Item, Simply Return It For A Full Refund In 30 Days. We Support 12 Months’ Warranty. If You Have Any Problems About Our Products, Please Feel Free To Contact Us..
Feature: This Tool Is Usually Used With The Engine Alignment Tool..
Function: Designed To Install The Aluminum Ring Into The Alpha 1 Generation 2, Bravo, Blackhawk U-Joints Bellows. This Will Not Damage Your Ring Like Aluminum Installers Can..
Features
- Fitment: Fit for Alpha 1 Gen 2, Bravo, and Blackhawk U-Joint Bellows
- Function: Designed to install the aluminum ring into the alpha 1 generation 2, bravo, blackhawk u-joints bellows. This will not damage your ring like aluminum installers can.
- Direct Replacement: Aftermarket for Sierra # 18-9870, Mercury / Mercruiser 91-818162
- Feature: This tool is usually used with the engine alignment tool.
- SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months Warranty. If you have any problems about our products, please feel free to contact us.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
Dimensions: 0.79 x 4.14 x 4.14 inches
See On Amazon #3
UanofCn 45497A1 Bellows Expander Tool for MerCruiser Sterndrive Alpha Gen I Gen II Bravo 1 2 3 Blackhawk MC-1 & R-MR 91-8M096108 Sierra 18-9847
Asin: B0BXKRYCVT | Model: 91-45497A1 | PartNumber: 91-45497A1 | Ean: 0788934538867 | UPC: 788934538867
Fit Mercruiser Alpha One Gen I Alpha One Gen Ii Bravo 1 Bravo 2 Bravo 3 Drives, Also Works For Mercruiser Blackhawk Mc-1 R-Mr.
Steps To Use. First The Bellows Needs To Be Installed On The Bellows Expander, Then The Bellows Needs To Be Passed Through The Vent Hole And Finally The Hose Clamps Need To Be Tightened. (Note: To Use This Tool, The Stern Drive Must Be Removed First).
This Bellows Expander Is Made Of Steel And Is Durable. Scissor Handle With Anti-Slip Function, Convenient For Your Use.
Replace Mercruiser 91-45497A1 91-8M0096108 45497A1 8M096108 Glm 90360 Sierra 18-9847 Mallory 79811.
Features
- This exhaust bellows expander tool makes it easy to replace the bellows
- Replace MerCruiser 91-45497A1 91-8M0096108 45497A1 8M096108 GLM 90360 Sierra 18-9847 Mallory 79811
- Fit MerCruiser Alpha One Gen I Alpha One Gen II Bravo 1 Bravo 2 Bravo 3 Drives, also works for MerCruiser Blackhawk MC-1 R-MR
- This bellows expander is made of steel and is durable. Scissor handle with anti-slip function, convenient for your use
- Steps to use. First the bellows needs to be installed on the bellows expander, then the bellows needs to be passed through the vent hole and finally the hose clamps need to be tightened. (Note: To use this tool, the stern drive must be removed first)
- See more on Amazon...
Brand: UANOFCN | Manufacturer: UanofCn Marine Parts Manufacturer
Warranty: 180 days
See On Amazon #4
Geecrack Bellows Gill 3.8" #220 Green Pumpkin Chart JDM (Orignal/Genuine Product)
Asin: B07HD17T6G | Ean: 4571473535154
Brand: GEECRACK | Manufacturer: GEECRACK
Warranty: 1 month
See On Amazon #5
91-818162 Bellow Retainer Ring Install tool fit for Alpha 1 Gen 2, Bravo and Blackhawk U-Joint Bellows
Asin: B08H4Y78ZH | Model: Sl-91-818162 | PartNumber: Sl-91-818162 | Ean: 0641197092746 | UPC: 641197092746
Using Method---- This Tool Is Usually Used With The Engine Alignment Tool. You Can Use Any Kind Of Rod That Fits The Hole.
Satisfaction Guarantee: If You're Not 100% Satisfied With This Tool, Simply Return It For A Full Refund In 30 Days, Guarantee With 12 Months’ Warranty..
High Quality---- Made Of High Standard Material,Designed To Meet Or Exceed Original Quality And Performance..
Nice Replacement--- Aftermarket For Sierra # 18-9870, Mercury / Mercruiser 91-818162.
Features
- Application--- Fit for Alpha 1 Gen 2, Bravo, and Blackhawk U-Joint Bellows(For 1991 & newer Generation II drives and 1988 & newer Bravo outdrives)
- Nice Replacement--- Aftermarket for Sierra # 18-9870, Mercury / Mercruiser 91-818162
- Using Method---- This tool is usually used with the engine alignment tool. You can use any kind of rod that fits the hole
- High Quality---- Made of high standard Material,Designed to meet or exceed original quality and performance.
- Satisfaction Guarantee: If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, guarantee with 12 months warranty.
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #6
Gear Up Guide Bellows Latex Neck Seal for Drysuit Trimmable, Large / 14.25" - 15.5" Neck
Asin: B07BGT9559 | Model: 2016 | PartNumber: 2016
The Replacement Kit Option Includes: All Inclusive Kit Includes: Bellows Neck Seal, Neck Template, Heat Tape, Cleaner, Abrasive Material, Gloves (For Use With Cleaner), Aquaseal And Hardener With Applicator..
Care For Seals: Always Rinse Latex Products With Fresh Water After Each Dive - To Remove Sand And Prevent Salt Crystals To Form. The Best Care For All Latex Products That Are Exposed To Oil And Sweat Is To Wash Thoroughly In Lukewarm Soap Water, Rinse And Dust With Talcum Powder. Avoid Heat And Sunlight Exposure. Store In A Dark And Cool Environ Ment..
To Measure Latex Seal: Take Measurement Around Neck At Widest Point. Make Sure Hair Or Shirt Collar Is Not Under The Measuring Tape. As A General Rule, The Seal Opening Should Be Trimmed To Be No Smaller Than 80% (I.E. Maximum Of 20% Less) Than Your Actual Measurement Of The Relaxed Neck Circumference, Tighter Than That Could Cut Off Blood Flow To Your Brain..
Highly Flexible And Has A Long Lifespan. Manufactured With Quality Latex Rubber Material. Travel Size, Quick, Includes Guided Instructions.
Features
- Can be mounted directly to Drysuit. Can be trimmed to fit. Available as Bellow Neck Seal only or with replacement kit.
- Highly flexible and has a long lifespan. Manufactured with quality Latex rubber material. Travel Size, Quick, Includes guided instructions
- The Replacement Kit option includes: All Inclusive Kit Includes: Bellows Neck Seal, Neck Template, Heat Tape, Cleaner, Abrasive Material, Gloves (for use with cleaner), AquaSeal and Hardener with applicator.
- To Measure Latex Seal: take measurement around neck at widest point. Make sure hair or shirt collar is not under the measuring tape. As a general rule, the seal opening should be trimmed to be no smaller than 80% (i.e. maximum of 20% less) than your actual measurement of the relaxed neck circumference, tighter than that could cut off blood flow to your brain.
- Care for Seals: Always rinse latex products with fresh water after each dive - to remove sand and prevent salt crystals to form. The best care for all latex products that are exposed to oil and sweat is to wash thoroughly in lukewarm soap water, rinse and dust with talcum powder. Avoid heat and sunlight exposure. Store in a dark and cool environ ment.
- See more on Amazon...
Brand: Gear Up Guide | Manufacturer: Gear Up Guide
See On Amazon #7
Epiphany Outdoor Gear V3-Pocket Bellows
Asin: B07KJQ1XLZ | Ean: 0799928883207 | UPC: 799928883207
Made In United States.
Built For Performance And Durability.
Features
- Crafted from the highest quality materials
- Built for performance and durability
- Made in United States
- See more on Amazon...
Brand: Epiphany Outdoor Gear | Manufacturer: Epiphany Outdoor Gear
Weight: 0.12 Pounds
Warranty: Manufacturer Warranty
See On Amazon #8
Vetus VP000080 Rubber Bellows F/joysticks
Asin: B0BZ39PMRV | Ean: 8717372442605
Brand: Vetus | Manufacturer: VETUS
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 0.01 Pounds
See On Amazon #9
Dive Rite 2-Zip Sidemount Bellows Pocket
Asin: B09BS2LKS8 | Ean: 0879642000316 | UPC: 879642000316
Brand: Dive Rite | Manufacturer: Dive Rite
See On Amazon #10
HeuroFosh Bellows Expander Tool Bundle with Bellow Retainer Ring Installation Tool Bundle with Hinge Pin Tool for Mercury MerCruiser Alpha 1 Gen 2 Bravo Blackhawk 91-45497A1 91-818162 91-78310
Asin: B0C6JZ2RXY
Fit For Mercruiser Alpha 1 Gen 1 , Alpha 1 Gen 2 , Bravo 1 , Bravo 2, Bravo 3 , Mc-1, Mr, R And Blackhawk Models.
By Using Those Tools, You Can Tackle Bellows Replacement With Ease And Confidence, Ensuring Longevity And Optimal Performance Of Your Engine..
The Kit Providing A Convenient And Reliable Solution To Repair And Maintain Your Mercury Mercruiser Sterndrive Engines..
Replaces Mercury Mercruiser 91-818162 91-43577 91-45497A1 91-8M0096108 91-78310 , Glm 90360 90200 , Sierra 18-9847 18-9870 18-9861 And Mallory 9-79811 9-79821 9-79805.
Features
- This is a bundle of goods which includes a Bellows Expander Tool, a Bellow Retainer Ring Installation Tool, and Hinge Pin Tool.
- Replaces Mercury MerCruiser 91-818162 91-43577 91-45497A1 91-8M0096108 91-78310 , GLM 90360 90200 , Sierra 18-9847 18-9870 18-9861 and Mallory 9-79811 9-79821 9-79805
- Fit for Mercruiser Alpha 1 Gen 1 , Alpha 1 Gen 2 , Bravo 1 , Bravo 2, Bravo 3 , MC-1, MR, R and Blackhawk models
- The kit providing a convenient and reliable solution to repair and maintain your Mercury Mercruiser Sterndrive Engines.
- By using those tools, you can tackle bellows replacement with ease and confidence, ensuring longevity and optimal performance of your engine.
- See more on Amazon...
Brand: Heurofosh
See On Amazon
Looking For Something Else?
Search