FYSETC 3D Printer Parts Heat Bed Mosfet Hot Bed Power Expansion Board High Current Load Module MOS Tube for 3D Printer Accessories-Pack of 1
Asin: B07C4PGXFK | Model: 8541631465 | PartNumber: 8541631465 | Ean: 0711102059857 | UPC: 711102059857
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Module Under Normal Cooling, Measured I (Max) = 30A Can Stable Long-Term Work During Use, So We Suggest The Current Should Not Exceed 30A..
Package Includes: 1Pc Red Mosfet, The Red Led Light To Indicate Use Looks Great Inside Its Case..
Connect The Control Signal Of Ramps1.4 Or Mks Mosfet To Bed, Can Use Hot Bed Output Signal Of Ramp1.4 And Mks Series To Control;.
Has A Large Footprint: Extra Large Heat Sink, More Stable; The Maximum Current Can Be Up To 30A Or More, Can Use Digital Signal Of 5-24V To Control. Work Well On Wanhao I3 Aka Monoprice Control Box/ I3 Mega/ Tronxy X5sa.
Features
- Good mosfet for your 3D printer hotbed: control hot bed, print head heating, compact appearance, compact design, more powerful heat dissipation, to solve the problem of excessive heat bed power, current load problem. It works well on wanhao i3/ i3 mega(a bit tough but fine / Tronx-X5SA etc.
- Has a large footprint: Extra large heat sink, more stable; the maximum current can be up to 30A or more, can use digital signal of 5-24v to control. Work well on wanhao i3 aka monoprice control box/ i3 mega/ Tronxy X5SA
- This module under normal cooling, measured I (Max) = 30A can Stable long-term work during use, so we suggest the current should not exceed 30A.
- Connect the control signal of Ramps1.4 or MKS Mosfet to bed, can use hot bed output signal of Ramp1.4 and MKS series to control;
- Package includes: 1PC RED Mosfet, the red LED light to indicate use looks great inside its case.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon Similar To FYSETC 3D Printer Parts Heat
#1
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 Pounds
See On Amazon #3
ANYCUBIC Vyper/Kobra Max/Kobra Plus 3D Printer Hotend Replacement Volcano V5 J-Head Quality Brass Nozzle 24V40W Ceramic Heating Cartridge Element Supports High Speed Printing
Asin: B09DKQ98L3 | Ean: 0770490052598 | UPC: 770490052598
【Plug And Play】: Both Of The Thermistor And Heating Rod Come With Connector, No Wiring And Peeling Works.So This V5 J-Head Hotend Will Be Quite Easy To Install On Anycubic Vyper 3D Printer..
【High-Accurate Brass Nozzle】: With Original High-Accurate Anycubic Brass Nozzle,It Can Provide Smoother Printing,Thus Having Better Printing Result..
【Filament Compatibility】: The 24V Volcano Hot End Works Great With 1.75Mm Pla/Abs/Wood/Petg/Tpu..
【Volcano Hotend Design】: The Print Head Heats Evenly Because Of The Special Volcano Hotend Nozzle Design ,Filament Flows Smoothly In Throat Nozzle ,And It Supports High Speed Printing..
Features
- Application : This hotend replacement is ONLY compatible with ANYCUBIC Vyper/Kobra Max/Kobra Plus 3d printer.It will NOT work with Kobra Neo or Kobra Go.
- Volcano Hotend Design : The print head heats evenly because of the special Volcano hotend nozzle design ,filament flows smoothly in throat nozzle ,and it supports high speed printing.
- Plug and Play : Both of the thermistor and heating rod come with connector, no wiring and peeling works.So this V5 J-head hotend will be quite easy to install on ANYCUBIC Vyper 3D printer.
- Filament Compatibility : The 24V Volcano hot end works great with 1.75mm PLA/ABS/WOOD/PETG/TPU.
- High-accurate Brass Nozzle : With original high-accurate Anycubic brass nozzle,it can provide smoother printing,thus having better printing result.
- See more on Amazon...
Brand: UniTak3D | Manufacturer: UniTak3D
Dimensions: 4.90 x 1.00 x 4.40 Inches | Weight: 0.13 Pounds
See On Amazon #4
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #5
Creativity Full Assembled Ender 3 Hotend Upgraded Kit with Nozzles 3D Printer Parts Accessories Replacement for Ender 3s/ Ender 3 Pro 3D Printer
Asin: B08QM6MC5C | Model: Ender3-Fan | PartNumber: Ender3-Fan | Ean: 9893521586945
✅【High Temperature Resistance】 Stainless Steel Material Nozzle Throat And High Quality Resistance Whose Temperature Can Up To 260 °C/ 500 °F.
✅【Surprise Gift】Comes With 4 Nozzles And A Black Silicone Sleeve For Free In The Package..
✅【Package List】 Mainly Including 2 Fans, Fan Covers, Heat Block, Cooling Block, Nozzle, Throat Pipe, Connector, Teflon Pipe, Thermistor Sensor, Heating Tube, Screws, Gaskets, Etc..
✅【Compatibility】 3D Printer Full Assembled Mk8 Extruder Set For Ender-3/ Ender-3S/ Ender-3 Pro And More 3D Printer..
Features
- High Quality 100% New, durable and good performance, fully assembled, you can install directly and easily.
- Compatibility 3D Printer full assembled MK8 extruder set For Ender-3/ Ender-3s/ Ender-3 Pro and more 3D printer.
- High Temperature Resistance Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 C/ 500 F
- Package List Mainly including 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, screws, gaskets, etc.
- Surprise Gift Comes with 4 nozzles and a black silicone sleeve for free in the package.
- See more on Amazon...
Brand: Creativity | Manufacturer: Creativity
See On Amazon #6
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
Asin: B07H8TSM95 | Model: Ender 3-Extruder | PartNumber: Ender 3-Extruder | Ean: 0608410981676 | UPC: 608410981676
Ender 3 Extruder Hot End Can Work With Different Size Mk8 Nozzle: 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzle.
Tip Of Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
Mk8 Extruder Hot End Kits,White Wire Was Temperature Thermistor, Black Wire Was Heating Tube 24V 40W.
5 Pieces 0.4Mm 3D Printers Nozzles As Gift..
Features
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
- See more on Amazon...
Brand: RICHOOSE | Manufacturer: Creality 3D
See On Amazon #7
Creality Original Ender 5 Hotend Kit for 24V Ender-5 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block Assembled
Asin: B07WRKJG9N | Ean: 0705300791480 | UPC: 705300791480
Operating Temperature Range： -40 ~ +260°C (-40 ~ +500 °F).
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Suitable For Creality Ender 5 3D Printer..
Features
- It's 100% Creality Original.
- Suitable for Creality Ender 5 3d printer.
- Operating temperature range -40 ~ +260 C (-40 ~ +500 F)
- MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
WINSINN 5015 Blower Fan 24V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 2Pcs)
Asin: B08R9G2VDR | Model: 2PFAN5015G24D | PartNumber: 2PFAN5015G24D | Ean: 0750081894318 | UPC: 750081894318
✔️Rated Voltage: Dc 24V, Current: 0.1A, Power: 2.4W,Speed: 5500Prm, Air Pressure: 16.28Mmh₂o, Airflow: 3.23Cfm, Noise: 40Dba.
✔️Packing List: 2 X 50Mm Blower Fan 24V - Dual Ball Bearing, Connector & Cable Length: Xh2.54 – 11.8In(300Mm), Size: 50Mm X 50Mm X 15Mm.
✔️Widely Used: Designed To Provide High Air Volume For Small Areas Which Requires Cooling Or Ventilation. Suitable For 3D Printer, Dvd Player, Small Communication Devices For Heat Radiation, Pc Cpu Server, Dvrs, Switches, Network Storage Devices And Can Be Used As A Replacement Fan For Any Electronic Products..
✔️High Quality Dual Ball Bearings, 5-Years Warranty. Balance Between High Air Volume And Low Noise, Suitable For 24 Hours / Day Long-Term Work, Long Life: 50,000 Hours..
Features
- WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH O, Airflow: 3.23CFM, Noise: 40dBA
- Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices for heat radiation, PC CPU server, DVRs, switches, network storage devices and can be used as a replacement fan for any electronic products.
- Packing List: 2 x 50mm Blower Fan 24v - Dual Ball Bearing, Connector & Cable length: XH2.54 11.8in(300mm), Size: 50mm x 50mm x 15mm
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN
Dimensions: 0.59 x 1.97 x 1.97 Inches
See On Amazon #9
Creality 3D Upgrade Ender 3 Hotend Kit, 24V Assembled Extruder Hot End Kit with Capricorn Bowden PTFE Tubing 3D Printer Accessories for Ender-3S/Ender-3 Pro/Ender-2 Pro 3D Printer
Asin: B0C8HRCSCP
【Easy Installation】The Heating Tube And Temperature Thermistor Come Out Of The Control Box And Connect With The Terminal Shell And Pins. You Can Then Insert The Hotend Kit, Which Makes It Easier To Replace The Hotend Kit. Mk8 Extruder Hotend Kit, White Wire Is Temperature Thermistor, Braided Wire Is Heating Tube 24V 40W, Heating Block + Cooling Block, To Ensure Stable Printing Temperature And Efficient And Reliable Printing..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Perfect And Durable】Capricorn Ptfe Tube Is Manufactured According To The Highest Specification Of 1.75Mm Filament. The Silicone Cover Helps To Keep The Hot End Temperature More Stable, Keep The Print Head Clean, And Prevent The Filament From Sticking To The Heating Block Or Nozzle..
【Upgrade Teflon Tube】Capricorn Ptfe Tube 1.75Mm Is Far Superior To The White Ptfe Tube That Comes With Any 3D Printer, Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage..
Features
- Quality Assurance 100% official high performance and precision assembled 24V 40W hotend kit, suitable for Ender 3, Ender 3 Pro, Ender 3S and Ender 2 Pro 3d printer upgrade units. The hotend extruder kit and accessories are all original and high quality from 100% quality assurance.
- Upgrade Teflon Tube Capricorn ptfe tube 1.75mm is far superior to the white ptfe tube that comes with any 3D printer, less friction means more responsiveness, less retraction, more accurate prints, less slippage.
- Easy Installation The heating tube and temperature thermistor come out of the control box and connect with the terminal shell and pins. You can then insert the hotend kit, which makes it easier to replace the hotend kit. MK8 extruder hotend kit, white wire is temperature thermistor, braided wire is heating tube 24V 40W, heating block + cooling block, to ensure stable printing temperature and efficient and reliable printing.
- Perfect and Durable Capricorn PTFE tube is manufactured according to the highest specification of 1.75mm filament. The silicone cover helps to keep the hot end temperature more stable, keep the print head clean, and prevent the filament from sticking to the heating block or nozzle.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #10
FYSETC 3D Printer Accessories - Spriite Extruder Hotend Replacement Parts - Aluminum Heatsink: Clone Fast Cooling Block Fit Crealiity Ender 3 S1 Pro CR10 Smart Sermon V1 Original Heat Sink
Asin: B0CP3RX5GT
Package Include: 1Pcs Extruder Heating Controller + 2Pcs Grub Screws As Original Replacement. Special Designed, Has Many Fins To Provide Lots Of Surface Area For Dissipation Of The Heat, And Precise Hexagon Socket Screw Hole Placement. If You Need Spriite Heat Block Thermistor Heater Cartridge 3010 4010 Fan Cooling Or Silicone Sock Breakout Adapter Board Dual Gear Drive, Please Enter Our Shop..
Material: Aluminum. Large Solid Heat Sink, Greater Heat Transfer And Fast Cooling, The Surface Of The Heat Sink Is Not Easy To Be Scratched, The Fins Are Not Easy To Bend..
3D Printing Part: Exact Replacement For Heat Sink, Do A Great Job At Reducing Hotend Temperature. Installation Is Super Easy, Drop-In Replacement Your Broken Stock Spriite Extruder Cooling Part. Perfect Solution To The Hot Running Extruder..
Fit Fdm 3D Project: Ender-3 S1 - Ender-3 S1 Pro - Ender-3 S1 Plus - Cr-10 Smart Pro - Sermoon V1 - Sermoon V1 Pro. But Not Fit E3 Style: B1 Se Plus, Neptune3 Plus Or Voxlabb Printer..
Features
- A very necessary spare machine part for the regular Spriite direct drive extruder: metal cooler aluminum block, can directly replace the stock one when broken. Based on customer's need, specially add 2pcs small hex screw(grub screw) that locks the heating element to use on the replacement. If need the Upgraded Integrated Gear kit for better 3d printing material extrusion, please search Asin: B0CXDF85MM at our store.
- Fit FDM 3D project: Ender-3 S1 - Ender-3 S1 Pro - Ender-3 S1 Plus - CR-10 Smart Pro - Sermoon V1 - Sermoon V1 Pro. But not fit E3 style: B1 SE Plus, Neptune3 Plus or Voxlabb printer.
- Package include: 1Pcs Extruder Heating Controller + 2Pcs grub screws as original replacement. Special designed, has many fins to provide lots of surface area for dissipation of the heat, and Precise hexagon socket screw hole placement. If you need spriite heat block thermistor heater cartridge 3010 4010 fan cooling or silicone sock breakout adapter board Dual gear drive, please enter our shop.
- 3D Printing part: Exact replacement for heat sink, do a great job at reducing hotend temperature. Installation is super easy, drop-in replacement your broken stock spriite extruder cooling part. Perfect solution to the hot running extruder.
- Material: aluminum. large solid heat sink, greater heat transfer and fast cooling, the surface of the heat sink is not easy to be scratched, the fins are not easy to bend.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 1.65 x 0.55 x 0.82 inches | Weight: 0.04 pounds
See On Amazon #11
FYSETC Prusa 3D Printer Accessory - MK4 Heater Block Silicone Sock: Easy Install Hotend Part Insulate Protect Hot End Nozzle Print Head Silicone Cover Compatible with Prusa MK3.9 XL - Black, Pack of 4
Asin: B0CT7GDT17
3. Package Contents: Nice Set Of Silicone Covers To Keep Your Blocks Clean. Easy Installation, Just Slip It On. It's A Must-Have To Keep A Few Extra Covers At Hand When You Don't Just Have A Single Nozzle/Block. It's Easier To Keep Your Mk4 Nozzles Paired With A Block, Thermistor, And Heater For Faster Changes. Of Course, That Includes These Silicone Covers. It Keeps Heat Block From Further Messes. Maintain The Hotend Temperature Stable And Provides Protection From Failed 3D Printing Projects..
5.High Temperature Resistance For 3D Printer Material: With This Sock You Can Safely Print More Exotic Materials Such As Petg At Higher Temperatures While Also Using The Cooling Fans At Full Speed. Actively Keeping The Hotend Very Hot And Cooling The Petg Much Quicker Before It Is Laid Onto The Hotbed Can Help With Success Rates On More Prints..
4.Upgraded Material:3D Printer Hotend Silicone Sock Is Made Of Heat-Resistant, Non-Stick Silicone Material, Injection Molded With Temperature Resistance Up To 280°C/536℉. Good For Keeping The Hot End Clean And Temperature Stable..
2. Easy To Install And Remove: Drop-In Replacement For The Original Sock. They Go On Just As Easily As The Oem Ones Do, Help Keep Your Heater Block Clean And Repel Plastic Of Burnt, Blackened, And Filament Build-Up, Reduce Your Repair Times, Then Extend The Life Of The Heat Block And Nozzle, Even The Whole Hot End. Make Sure To Enable The "Nextruder Silicone Sock" Option Under "Settings->Hardware", Otherwise You Might See Issues With It Not Retracting Enough To Prevent Crashing Into Your Print..
Features
- 1. Good Nozzle cover for MK4 Hot End: The Heater Block Silicone Sock is compatible with Prusa MK4 - MK3.9 - XL 3D Printer. These fit snugly, do not warp under heat and work well. Note: NOT for Prusa MK3S MK3 MK2.5S MK2.5 MK2S MMU2S CW1 SL1 MINI MK3S+ MINI+ SL1S CW1S MK2 MMU2 MMU1 MMU3 Hotend. A perfect diy 3d printer part for MK4 all-metal high-precision nozzle with an all-metal filament guide (no PTFE tubes anywhere).
- 2. Easy to install and remove: Drop-in Replacement for the original sock. They go on just as easily as the OEM ones do, Help keep your heater block clean and repel plastic of burnt, blackened, and filament build-up, reduce your repair times, then extend the life of the heat block and nozzle, even the whole hot end. Make sure to enable the Nextruder Silicone Sock option under Settings->Hardware, otherwise you might see issues with it not retracting enough to prevent crashing into your print.
- 3. Package Contents: Nice set of silicone covers to keep your blocks clean. Easy Installation, just slip it on. It's a must-have to keep a few extra covers at hand when you don't just have a single nozzle/block. It's easier to keep your MK4 nozzles paired with a block, thermistor, and heater for faster changes. Of course, that includes these silicone covers. It keeps heat block from further messes. Maintain the hotend temperature stable and provides protection from failed 3d printing projects.
- 4.Upgraded Material:3D Printer Hotend Silicone Sock is made of heat-resistant, non-stick silicone material, Injection molded with temperature resistance up to 280 C/536 . Good for keeping the hot end clean and temperature stable.
- 5.High temperature Resistance for 3d printer material: With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.95 x 0.61 x 0.63 Inches
See On Amazon #12
FYSETC Prus i3 Hotend MK3S+ J-Head Extruder Kit 24V 40W for 1.75mm Direct Filament Compatible with Prus i3 MK3/MK3S/MK3S+ and Other E3 V6 Remote Printhead Printer with Silicon Cover and 0.4mm Nozzle
Asin: B0BL3G7T6D
Kit Includes: A Semi-Assembled Part( V6 All Metal Heatsink+ Bimetal Throat+ High Quality Brass Nozzle+ Aluminum V6 Heater Block) X High Temperature Protective Silicone Cover X 24V 40W Cartridge Heater X Specific 104Nt Thermistor X Extra V6 Stainless Steel Throat..
High Quality: Semi-Assembled Hotend Adopts Copper- Titanum Alloy All-Metal Throat, Can Be Applied To High Temperature Filament Printing; The Quality Cnc Heating Block With Good Thermal Conductivity And High Precision..
Heater Thermistor: 24V 40W Cartridge Heater Is Made Of 304 Stainless Steel Material,Diameter: 6Mm ; Length: 15Mm, Conveniently Pre-Wired With 1 Meter Long High Temperature Resistant Wire; Specific 104Nt Thermistor With Cable 1Meter Long, Temperature Measurement Head Cylinder Diameter 3Mm, Length 12Mm, Can Be Used With The Heating Block That Support The Thermocouple..
Easy To Install: Comes With A Full Set, And Semi-Assembled, Need You To Complete The Assembly Then A Drop In All Metal Conversion Kit For Your Printer. Note: After Installing, Heat The Printhead To About 150 Degrees/302℉, Then Tighten The Nozzle With A Wrench To Avoid 3D Printing Material Oozing..
Features
- Fits: A Good hotend replacement or 3D printer accessory for DIY Prus i3 MK3/MK3S/MK3S+ model or other machines with E3 V6 Remote Extruder. Not fit for Mk2(MK2 uses 12V).
- Easy to install: comes with a full set, and semi-assembled, need you to complete the assembly then a Drop in All Metal Conversion Kit for your printer. Note: After installing, Heat the printhead to about 150 degrees/302 , then tighten the nozzle with a wrench to avoid 3d printing material oozing.
- Kit includes: A semi-assembled part( V6 All metal heatsink+ Bimetal Throat+ High quality brass nozzle+ Aluminum V6 Heater Block) x high temperature protective silicone cover x 24V 40W cartridge heater x specific 104NT thermistor x extra V6 stainless steel throat.
- Heater Thermistor: 24v 40W cartridge Heater is made of 304 stainless steel material,Diameter: 6mm ; Length: 15mm, Conveniently pre-wired with 1 meter long high temperature resistant wire; specific 104nt thermistor with cable 1meter long, Temperature measurement head cylinder diameter 3mm, length 12mm, can be used with the heating block that support the thermocouple.
- High Quality: Semi-assembled hotend adopts copper- titanum alloy all-metal throat, can be applied to high temperature filament printing; the quality CNC heating block with good thermal conductivity and high precision.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #13
Creality Original Ender 5 Hotend Assembled with Fan for Ender-5 and Ender-5 Pro 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block, 24V
Asin: B09WZZCS2T | Model: ender-5 hotend | PartNumber: ender-5 hotend
This Creality Ender 5 Hot End Replaced The Original Perfectly, The Ender 5 Pro Hot End Was Easy To Get Operational With Minimum Soldering..
Superior Performance: Ender 5 Pro Hotend Is With High Quality Teflon Tube, Reduce Clogging, Smooth Filament Feeding, Rapid Heating, Precise Temperature Contral..
Seamless Connected Between Nozzle And Throat, Upgraded Interior Design, No More Clogging With Long Time Printing..
Compatible With Creality Ender-5 3D Printer. Operating Temperature Range: -40 ~ +260°C (-40 ~ +500 °F) Ender 5 Hotend, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Features
- If you find that the wiring does not match your printer after receiving the hotend, please follow the wiring in image 2 to operate. If you have any questions, please contact our after-sales service. We are always here to assist you.
- Compatible with Creality Ender-5 3d printer. Operating temperature range: -40 ~ +260 C (-40 ~ +500 F) Ender 5 hotend, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- This creality ender 5 hot end replaced the original perfectly, the ender 5 pro hot end was easy to get operational with minimum soldering.
- Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
- Superior performance: Ender 5 pro hotend is with high quality teflon tube, reduce clogging, smooth filament feeding, rapid heating, precise temperature contral.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #14
HICTOP Ender 3 Heater Cartridge 24V 40W 1M/39.4Inch for Creality Ender 3 Ender 3 Pro Ender 5 CR-10S Pro 3D Printer Prusa Mendel Pack of 3
Asin: B01HGIMI2G | Model: HIC-001 | PartNumber: HIC-001 | Ean: 0635309044990 | UPC: 635309044990
Application Of The 24V Heater Cartridge 40W: Creality Ender 3, Ender 3 Pro, Ender 6 Cr-10S Pro Etc. 3D Printers Prusa Mendel.
Temperature Of The Ender 3 V2 Heater Cartridge: It Can Take Up To 280 ° C.
Diameter Of The Ender 3 Pro Heater Cartridge : 6Mm. Length: 20Mm,Wire Length:1M/39.4Inch.
24V Heater Cartridge Voltage And Power : 24V/40W..
Features
- ender 3 heater cartridge material : Stainless steel (304)
- 24V heater cartridge voltage and power : 24V/40W.
- Application of the 24v heater cartridge 40W: Creality ender 3, ender 3 Pro, ender 6 CR-10S Pro etc. 3D Printers Prusa Mendel
- Diameter of the ender 3 pro heater cartridge : 6mm. Length: 20mm,Wire Length:1m/39.4inch
- Temperature of the ender 3 V2 heater cartridge: It can take up to 280 C
- See more on Amazon...
Brand: HICTOP | Manufacturer: HIC Technology
See On Amazon #15
WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
Asin: B07DB7DLMM | Model: GFAN501524VB | PartNumber: GFAN501524VB | Ean: 0686603769300, 7753686202703 | UPC: 686603769300
✔️Rated Voltage: Dc 24V, Current: 0.1A, Power: 2.4W,Speed: 5500Prm, Air Pressure: 16.28Mmh₂o, Airflow: 3.23Cfm, Noise: 40Dba.
✔️Widely Used: Designed To Provide High Air Volume For Small Areas Which Requires Cooling Or Ventilation. Suitable For 3D Printer, Small Squirrel Cage, Humidifier, Aromatherapy And Can Be Used As A Replacement Fan For Any Electronic Products..
✔️Connector & Cable Length: Xh2.54 – 11.8In(300Mm), Size: 50Mm X 50Mm X 15Mm.
✔️High Quality Dual Ball Bearings, 5-Years Warranty. Balance Between High Air Volume And Low Noise, Suitable For 24 Hours / Day Long-Term Work, Long Life: 50,000 Hours..
Features
- WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH O, Airflow: 3.23CFM, Noise: 40dBA
- Connector & Cable length: XH2.54 11.8in(300mm), Size: 50mm x 50mm x 15mm
- Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
Dimensions: 1.97 x 0.59 x 1.97 inches
See On Amazon #16
1set Upgrade 24V 45W 6x20 Heater Cartridge and 3mm NTC 100K Thermistor Temperature Sensor Compatible with ANYCUBIC Vyper/Kobra Max/Kobra Plus 3D Printer Parts (Heater&thermistor)
Asin: B0CM295CPL
Upgrade Your Printer : The Temperature Sensor Is Using 3Mm Od Cartridge Instead Of The Glass Head To Make The Connection Is More Stable, More Precise Results. And Using 45W Instead 40W, Heats Faster And Higher Temperature..
Package: 1Pc Heater And 1Pc Thermistor.
Compatible With Anycubic Vyper/Kobra Max/Kobra Plus 3D Printer.
Both Of Heater And Thermistor Come With Xh2.54 Connector,Plug And Play, Very Easy To Install Them Onto Printers..
Features
- Power : 24V 45W, OD6mm cartridge for heater, OD3mm cartridge for thermistor.
- Both of heater and thermistor come with XH2.54 connector,Plug and play, Very easy to install them onto printers.
- Upgrade your printer : The temperature sensor is using 3mm OD cartridge instead of the glass head to make the connection is more stable, more precise results. And using 45W instead 40W, heats faster and higher temperature.
- Compatible with ANYCUBIC Vyper/Kobra Max/Kobra Plus 3d printer
- Package: 1pc heater and 1pc thermistor
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: HOCENWAY
Weight: 0.03 pounds
See On Amazon #17
FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs
Asin: B07QDQXDQ5
The Customized Terminal Connector( Xh2.54 2P With Buckle) Is Specially For Mk3/Mk3s Prus Einsy Boards, So Please Check Before Ordering. If For Prus Mini, Please Search Asin: B09wmzj86c. If Need More Support, Please Feel Free To Contact Us Via Your Order Id, We'll Assist You Directly..
Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Precision Temperature Measurement..
Ht-Ntc100k Thermistor Adopts White High-Temperature Cord, Can Bear Higher Temperature. And For Customers' Convenience, The Wires Adopts Line Connection, The Customer Can Tear The Wires Depends On Their Application. The High Temperature Line Is Double Thicker Than Others In The Market, Not Easy To Break Off..
The Temperature Measurement: -50 °C ~ +250 °C For A Long Lifecycle, Sometimes Can Reach Up To +300℃ For A Short Time Using, Can Replace The Original K-Type Thermocouple Temperature, Very Fit For Printing High-Temperature Filament. （Please Note That The Temperature Should Not Be Over 300 °C, Otherwise The Temperature Will Not Be Accurate.).
Features
- Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the same size heating block that support the thermocouple.
- The temperature measurement: -50 C ~ +250 C for a long lifecycle, sometimes can reach up to +300 for a short time using, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament. Please note that the temperature should not be over 300 C, otherwise the temperature will not be accurate.)
- The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus Mini, please search Asin: B09WMZJ86C. If need more support, please feel free to contact us via your order ID, we'll assist you directly.
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #18
FYSETC Prusa MK4 Part - Nextruder V6 Nozzle Adapter Replacement - Bimetal Heatbreak Adaptor: High Temperature Resistant Hotend Accessory Compatible 3D Printer Original Prusa MK3.9 - XL Heaterblock
Asin: B0CWRBCMY7
3. Package Content: Nextruder V6 Nozzle Adapter With 3Pcs High Flow E3dv6 Nozzles (Random Style Or Color). We Have Other Cloned Mk4 Spare Parts, Such As 241X253.8Mm Smooth Pei Peo Pet Pey - Textured Build Plate, Heatblock, Heating Element Thermistor, 104Nt Heat Bed Thermistor Kit, Silicone Sock At Our Store Now..
5.V6 Nozzle Saver: With This Adaptor Filament Feeding Tube You Can Reuse All Your Existing V6 Style Nozzles. All-Metal Filament Guide (No Ptfe Tubes Anywhere) Improves The Overall Reliability Of The Printer. More Other Cloned Mk4 Printer Part Will Come Soon, Like Extruder Axis Stepper Motor, Extruder Breakout Board, Mainboard. If Needed, Please Mail Us..
4. High Quality Bi-Metal Heatbreak: This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction. It Has High Temperature Resistant Up To 500C Degree, With Different Thermal Conductivity And Smooth Inner Wall Reduce 3D Printer Material Clogging. A Wide Compatibility With Different Filaments, Such As Pla, Tpu, Petg, Wood, Abs, Etc..
2. How To Replace The Stock Adaptor?- First, Screw The Throat Into The Heater Block Tightly With A Wrench, Heating Up The Printhead At The Same Time Is Very Necessary(If Using An Old Heater Block), Then Screw The Nozzle Tightly Enough. Last, Screw The Throat And Nozzle One More Time Together With The Heated Block. You Can See There Exists A Gap About 0.5Mm Between Nozzle And Block, Then Done! Refer Installation Video On Yt, Search: Mk4 Split Pipe Installation. Any Question, Please Contact Us..
Features
- 1.A must-have spare part for DIY your FDM 3D printing project or replace Original MK4 - MK3.9 - XL Extruder Throat: This is a clone bimetal heatbreak for the Hotend assembly dedicated for printers equipped with Nextruder. This adapter makes your Nextruder compatible with any V6 nozzle. Not compatible with Prusa I3 MK3S, MK3, MK2.5S, MK2.5, MK2S, MMU2, SCW1, SL1, MINI, MK3S+, MINI+, SL1S, CW1S, MK2, MMU2, MMU1, MMU3, MK3.5.
- 2. How To Replace the Stock Adaptor?- First, screw the throat into the heater block tightly with a wrench, heating up the printhead at the same time is VERY necessary(if using an old heater block), then screw the nozzle tightly enough. Last, screw the throat and nozzle one more time together with the heated block. You can see there exists a gap about 0.5mm between nozzle and block, then done! Refer Installation Video on YT, search: MK4 split pipe installation. Any question, please contact us.
- 3. Package Content: Nextruder V6 Nozzle Adapter with 3pcs High flow E3DV6 nozzles (Random Style or Color). We have other cloned MK4 spare parts, such as 241x253.8mm Smooth PEI PEO PET PEY - Textured build plate, heatblock, heating element thermistor, 104nt heat bed thermistor kit, silicone sock at our store now.
- 4. High Quality Bi-Metal Heatbreak: This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction. It has High temperature resistant up to 500C degree, with different thermal conductivity and smooth inner wall reduce 3d printer material clogging. A wide compatibility with different filaments, such as PLA, TPU, PETG, Wood, ABS, etc.
- 5.V6 Nozzle Saver: With this adaptor filament feeding tube you can reuse all your existing V6 style nozzles. All-metal filament guide (no PTFE tubes anywhere) improves the overall reliability of the printer. More other cloned MK4 printer part will come soon, like Extruder axis stepper motor, extruder breakout board, mainboard. If needed, please mail us.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 0.01 Pounds
See On Amazon #19
FYSETC 3D Printer Accessories - Prusa i3 MK4 Hot End Part Nextruder - Heater 100K Thermistor: Heating Cartridge 24V 40W NTC Temperature Sensor Head 104NT for FDM Printing Project Spare Replacement
Asin: B0CPLKSN5K
3. Clone Heating Components: 24V Heater Elements, Heating Tube Probe 6*12Mm, Directly Drop In The Original Heater When The Stock Cord Broke Off. Special Design For Prusa Mk4, Not Directly Replacement For Neptune3 Plus Ender 3 Neo E3 5 Plus K1 Max Sv06 Sv07 P1p P1s X1 Sw-X2 Vyperr Kobra2 Adventure3 Taz 6 Voro2.4 Aquilax2 Super Racer Tina2 B1 Lk1 Lk4 Lk5 Pro X40 Idex S8 Pro..
5. Compatible With I3 Mk4 Mk3.9 Only, Not Fit For Mk2 Mk2.5S Mk3 Mk3s+ Etc Old Prusai3 Version Hotend. Other Mk4 Clone Spare Parts Will Be Back, Like Nextruder Heater Block Silicone Sock Heatbed Thermistor Kit Nozzle Filament Ir Sensor Detection Mk52 Pei Plate Sheet Y Carriage Heated Bed Spacer 5V Blower Cooling Fan 4010 5015 2004 Display Superpinda 2Gt Timing Belt Pulley Etc, If Needed, Please Email Us..
4. Package Include: 1Pc 24V 40W Heater - Cable About 4.7Inch And 1Pc Thermistor Ntc 100K - Wire About 3.5Inch..
2. Directly Replace The Stock Cartridge Thermistor: 104Nt Temperature Sensor, Not 100K 3950, Can Be For 300℃/ 572℉ Long Hours Printing, 304 Stainless Steel Cover The Internal Temperature Package, About 4.7In Wire, With 2Pin Connector, Temperature Measurement Print Head Cylinder Diameter 3Mm, Length 15Mm, Can Be Used With The Same Size Like V6 Heating Block That Support The Thermocouple..
Features
- 1. Spare must parts for DIY your FDM 3D machine or MK4 MK3.9 Hotend Original repair accessory: This is a clone set heater and temperature for printers using Nextruder. The heater and thermistor heat head and connector was easily completed with next-gen extruder, heat fast and test temperature precisely. Note: the line length of Thermistor only 90mm, not for Prus XL machine(it needs 110mm length). We will update its length next time.The heater cartridge fits XL well.
- 2. Directly replace the stock cartridge thermistor: 104NT temperature sensor, not 100k 3950, can be for 300 / 572 long hours printing, 304 stainless steel cover the internal temperature package, about 4.7in Wire, with 2pin connector, Temperature measurement print head cylinder diameter 3mm, length 15mm, can be used with the same size like v6 heating block that support the thermocouple.
- 3. Clone heating components: 24V heater elements, heating tube probe 6*12mm, directly drop in the original heater when the stock cord broke off. Special design for Prusa MK4, not directly replacement for neptune3 plus ender 3 neo e3 5 plus k1 max sv06 sv07 p1p p1s x1 SW-X2 vyperr kobra2 adventure3 taz 6 voro2.4 AquilaX2 Super Racer Tina2 b1 LK1 LK4 LK5 Pro X40 idex S8 Pro.
- 4. Package include: 1pc 24V 40W heater - cable about 4.7inch and 1Pc Thermistor NTC 100k - wire about 3.5inch.
- 5. Compatible with i3 MK4 MK3.9 only, not fit for MK2 MK2.5S MK3 MK3S+ etc old prusai3 version hotend. Other MK4 clone spare parts will be back, like nextruder heater block silicone sock heatbed thermistor kit nozzle filament ir sensor detection MK52 pei plate sheet y carriage heated bed spacer 5V blower cooling fan 4010 5015 2004 display superpinda 2gt timing belt pulley etc, if needed, please email us.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #20
kweiny MK10 Hotend Kit with Silicone Sock for 3D Printer Extruder Upgraded Accessories
Asin: B08L22K5M9 | Model: MK10 | PartNumber: MK10
Upgraded Version: According To Customer Feedback, A M3 Threaded Hole Has Been Added To The Aluminum Block, Making It Suitable For Both M3 And M4 Thermistor.
Material: Nozzle Is Brass. Throat Is Stainless Steel. Heater Block Is Aluminium Alloy With Anodized. Sock Is Silicone Rubber.
Quantity And Specification: 1 Piece Mk10 Hotend Kit, It Include These Parts: 0.4Mm Nozzle With M7 Thread 1 Piece, Throat With 1.75Mm Ptfe Tube 1 Piece, Aluminum Heater Block 1 Piece, Silicone Sock 1 Piece. For Detailed Dimensions, Please Refer To The Drawings In The Upper Left.
Replaceability: For Flashforge Creator Pro, Creator X, Dreamer, Finder, Inventor, Idea Builder, Powerspec 3D Pro, Powerspec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao I3, Monoprice Maker Select Plus, Qidi Tech X-Plus And X-Max, X Pro, I-Mates, X-Maker, X-Smart, Cocoon Create, Etc..
Features
- Compatibility: Fit with MK10 3D printer 6.3mm(1/4" ) cartridge heater, Dia 8mm aluminum cooling block, M3 and M4 thermistor
- Replaceability: for FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech X-plus and X-max, X pro, i-Mates, X-Maker, X-Smart, Cocoon Create, etc.
- Upgraded Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor
- Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece, silicone sock 1 piece. For detailed dimensions, please refer to the drawings in the upper left
- Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy with anodized. Sock is silicone rubber
- See more on Amazon...
Brand: kweiny | Manufacturer: Xingzhu
Dimensions: 0.51 x 0.79 x 0.79 inches | Weight: 0.80 ounces
See On Amazon
Looking For Something Else?
Search