Milling Indexing 4"/ 100 Rotary Table Quality Precision Horizontal Vertical With Suitable M6 Clamp Kit & Small Chuck (With 70 MM 4 Jaw Independent Chuck)
Asin: B07D8361NX | Ean: 8903562970731
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That It Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table..
Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees. It Can Be Mounted Both In Horizontal & Vertical Position. Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Chuck Body Is High Grain Sg Caste Iron & Jaws Are Of Tool Steel. Jaws Are Hardened & Ground..
Features
- Quality Tool Set Of 4" Regular Rotary Table With A 70 MM 4 Jaws Independent Chuck With Back Plate & Fixingst Nut Bolts & M6 Clamp Kit
- Chuck Body Is High Grain SG Caste Iron & Jaws Are Of Tool Steel. Jaws Are Hardened & Ground.
- A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That It Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table.
- Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees. It Can Be Mounted Both In Horizontal & Vertical Position. Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero.
- See more on Amazon...
Brand: ASSORTS | Manufacturer: ASSORTSMACHINETOOLS
See On Amazon Similar To Milling Indexing 4 100 Rotary
#1
4'' inch - 100mm Rotary Table Horizontal & Vertical Model Precision, Rotary ,Milling ,Indexing machine Table
Asin: B07CSSKBDW | Model: AAA-132 | PartNumber: AAA-132 | Ean: 8903564939187
Center Height In Vertical Position: 2-1/16" (50 Mm Approx) Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Can Be Mounted Both In Horizontal & Vertical Position..
Table Is Graduated 360 Degrees. Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees..
Features
- Very High Quality 4" /100 mm Regular Rotary Table designed for smaller milling machines
- Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
- Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
- Can be mounted both in Horizontal & vertical position.
- See more on Amazon...
Brand: AD INTERNATIONAL | Manufacturer: ADI
Weight: 4.00 Kilograms
See On Amazon #2
Rotary Table for Milling Machines 4" Inches (100mm) 4 Slots Horizontal and Vertical
Asin: B0B93LPDWR | Model: 4ROTARY | PartNumber: 4ROTARY
Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Table Is Graduated 360 Degrees. Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees..
Can Be Mounted Both In Horizontal & Vertical Position.
Center Height In Vertical Position: 2-1/16" (50 Mm Approx) Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Features
- High Precision Quality Made Low Profile Rotary Table
- Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
- Hand wheel is graduated in divisions of 10 min & can be set to zero.
- Can be mounted both in Horizontal & vertical position
- Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
- See more on Amazon...
Brand: RAHISH TOOLS | Manufacturer: RAHISH TOOLS
See On Amazon #3
VEVOR Rotary Table for Milling Machines, 4''/ 100 mm, Horizontal Vertical Model Precision Milling Rotary Table, with 3.1''/80 mm 3-Jaw Chuck M10 T-Bolts Nuts, for Milling Engineering Indexing Tools
Asin: B0CYLHL6PQ | Model: HV-4-KP | PartNumber: HV-4-KP | Ean: 0197988568506 | UPC: 197988568506
High Precision At Your Fingertips: The Milling Machine Rotary Table Is Operated By A Handwheel, Complete With Crystal-Clear Scales On Both The Wheel And The Table For Precise Measurements. The Handwheel Scale Number Is 100, While The Table Itself Is Marked With 360 Degrees. With A Worm Gear Ratio Of 1:36, A Single Rotation Of The Handwheel Results In A 10-Degree Turn Of The Table, Aligning Perfectly With Intuitive Operation And Allowing For Precise Control Over Even The Slightest Rotation..
Exceptional Durability, Built To Last: Step Up Your Milling Game With Our Exceptionally Durable Rotary Table Crafted From Ht250 Cast Iron For Maximum Wear Resistance And A High-Hardness Surface That Resists Scratches And Corrosion, Ensuring An Extended Lifespan. Even Under Heavy Loads, High Pressure, And Rapid Rotation, Our Rotary Table Maintains Its Integrity And Durability. Choose Our Ht250 Cast Iron Rotary Table For A High-Quality Performance In Your Milling Operations..
Horizontal & Vertical Installation: When Mounted Horizontally, The Chuck Top Height Is 4.7'' / 120 Mm (±3 Mm), And When Mounted Vertically, The Chuck Center Height Is 3.4'' / 86 Mm (±3 Mm). Our Rotary Table Fits Industrial And Home-Use Milling Machines As Long As Your Milling Machine Tool Height Is Higher Than Vertical/Horizontal Installation Heights. Additionally, The Table's Bottom Features Positioning Slots For Easy And Secure Attachment To Your Milling Machine..
Secure Small Workpieces With Ease: Our Rotary Table Comes With A 3-Jaw Chuck, And The Serrated Jaw Ensures A Firm Grip On Even The Small Workpieces. Chuck Diameter: Φ 3.1'' / 80 Mm. The Internal Jaw Can Be Used For Internal & External Clamping. External Clamping Range: 0.08''- 0.98'' / 2-25 Mm, Internal Clamping Range: 0.98''- 2.76''/ 25-70 Mm. It Includes An External Jaw And External Clamping Range Of 0.87''-2.76'' / 22-70 Mm. Enjoy The Precise And Secure Machining Of Small Components!.
Features
- 4-Inch Milling Machine Rotary Table: Elevate your milling capabilities with our 4'' / 100 mm rotary table, which is ideal for small milling machines. It is designed for precise positioning, rotation, indexing, and clamping of wood and metal workpieces for curved surface machining, elongated hole processing, and precision drilling. Widely used in automotive, mold-making, and general machinery, underscores its essential role in mechanical processing.
- Secure Small Workpieces with Ease: Our rotary table comes with a 3-jaw chuck, and the serrated jaw ensures a firm grip on even the small workpieces. Chuck Diameter: 3.1'' / 80 mm. The internal jaw can be used for internal & external clamping. External Clamping Range: 0.08''- 0.98'' / 2-25 mm, Internal Clamping Range: 0.98''- 2.76''/ 25-70 mm. It includes an external jaw and external clamping range of 0.87''-2.76'' / 22-70 mm. Enjoy the precise and secure machining of small components!
- High Precision at Your Fingertips: The milling machine rotary table is operated by a handwheel, complete with crystal-clear scales on both the wheel and the table for precise measurements. The handwheel scale number is 100, while the table itself is marked with 360 degrees. With a worm gear ratio of 1:36, a single rotation of the handwheel results in a 10-degree turn of the table, aligning perfectly with intuitive operation and allowing for precise control over even the slightest rotation.
- Horizontal & Vertical Installation: When mounted horizontally, the chuck top height is 4.7'' / 120 mm ( 3 mm), and when mounted vertically, the chuck center height is 3.4'' / 86 mm ( 3 mm). Our rotary table fits industrial and home-use milling machines as long as your milling machine tool height is higher than vertical/horizontal installation heights. Additionally, the table's bottom features positioning slots for easy and secure attachment to your milling machine.
- Exceptional Durability, Built to Last: Step up your milling game with our exceptionally durable rotary table crafted from HT250 cast iron for maximum wear resistance and a high-hardness surface that resists scratches and corrosion, ensuring an extended lifespan. Even under heavy loads, high pressure, and rapid rotation, our rotary table maintains its integrity and durability. Choose our HT250 cast iron rotary table for a high-quality performance in your milling operations.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 4.72 x 6.30 x 5.83 Inches | Weight: 11.68 pounds
See On Amazon #4
HV6 3 Slots / 6" inches (150mm) Rotary Table with Steel Dividing Plates Set along with doulble bolt tailstock for Quality Engineering Accessories, Milling Vice Vise Machine Tools
Asin: B0B94H48TS | Model: HV6ROTARY3SET1 | PartNumber: HV6ROTARY3SET1
A Set Of Steel Dividing Plates For Indexing With All Required Accessories || Designed To Fit Our Hv4 & Hv6 Rotary Tables. (Worm-Gear Ratio-90: 1) || Designed To Fit Our Hv4 & Hv6 Rotary Tables. (Worm-Gear Ratio-90: 1) || Diameter Of The Plates Is 100 Mm. Centre Hole Of The Plate Is 21 Mm. Thickness 7 Mm.
It Is Used When Between Centre Work Is Required. || These Are Adjustable For Different Heights Having Fine Feed Centre Point And The Centre Tip Is Hardened And Ground..
Its Made Of Good Quality Of Cast Iron. || Height Is Adjustable From 80 Mm To 110 Mm || It Is Used On Our Hv4 Hv6 Rotary Table..
Hv6 Rotary Table: Hv6 Rotary Table Diameter :150 Mm (6"") Overall Height : 80 Mm ( 3-1/4"") Centre Height In Vertical Position: 105 Mm Worm- Gear Ratio- 1:90, Which Means That The 1 Handle Rotation Shall Turn The Table By 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel Graduated In Seconds. Vernier Scale Is Caliberated To 10 Seconds || Centre Bore Of The Table: 2 Mt 2 Oiling Points For A Direct Lubrication Of The Table For Longer Life & Better Performance. Can Be Clamped In Horizontal As Well Vertical Position..
Features
- A great combo of HV6 3 slots Rotary table with double bolt tailstock and dividing plates For Milling Machine
- HV6 Rotary Table: HV6 Rotary Table Diameter :150 mm (6) Overall Height : 80 mm ( 3-1/4) Centre Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds || Centre Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position.
- A set of Steel Dividing Plates for Indexing with all required Accessories || Designed to Fit our HV4 & HV6 Rotary Tables. (Worm-Gear Ratio-90: 1) || Designed to Fit our HV4 & HV6 Rotary Tables. (Worm-Gear Ratio-90: 1) || Diameter of the Plates is 100 mm. Centre Hole of the Plate is 21 mm. Thickness 7 mm
- Its made of good Quality of Cast Iron. || Height is adjustable from 80 mm to 110 mm || It is used on our HV4 HV6 Rotary Table.
- It is used when between centre work is required. || These are adjustable for different heights Having fine feed centre point and the centre tip is hardened and Ground.
- See more on Amazon...
Brand: RAHISH TOOLS | Manufacturer: RAHISH TOOLS
See On Amazon #5
4" Inches (100 mm) 4 Slots Regular Rotary Table for Milling Machines
Asin: B01MY9H1EO | Model: MRT-4R.4 | PartNumber: MRT-4R.4
Center Height In Vertical Position: 2-1/16" (50 Mm Approx) Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Can Be Mounted Both In Horizontal & Vertical Position..
Table Is Graduated 360 Degrees. Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees..
Features
- Brand New Very High Quality 4" /100 mm Regular Rotary Table designed for smaller milling machines
- Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
- Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
- Can be mounted both in Horizontal & vertical position.
- See more on Amazon...
Brand: ASSORTS | Manufacturer: Global Tools
See On Amazon #6
Precision quality 4"/ 100 mm tilting milling indexing rotary table with small chuck, back plate & fixing t nuts bolts-metalworking engineering machine tools (with 65 mm 3 jaw self-centering)
Asin: B07DLNGKGV | Ean: 8903562967083
Worm Gear Ration Is 1:36 Which Means That 1 Handle Rotation Shall Turn The Table By 10 Degrees..
Supplied With A 65 Mm 3 Jaws Self Centering Small Chuck With Back Plate & Fixing T Nuts Bolts.
Features To Tilt And Locked At Any Angle From 0 To 90 Degrees..
Features
- Precision Quality 4" /100 MM Tilting Rotary Milling Indexing Rotary Table
- Features To Tilt And Locked At Any Angle From 0 To 90 Degrees.
- Worm Gear Ration Is 1:36 Which Means That 1 Handle Rotation Shall Turn The Table By 10 Degrees.
- Supplied With A 65 MM 3 Jaws Self Centering Small Chuck With Back Plate & Fixing T Nuts Bolts
- See more on Amazon...
Brand: ASSORTS | Manufacturer: ASSORTSMACHINETOOLS
Weight: 12.13 pounds
Warranty: 3 Months
See On Amazon #7
M6 Clamp Kit Set (6 mm) suitable for 3" (75mm) & 4" (100 mm) Rotary Table
Asin: B01N13MAAW | Model: MRTCK-6M | PartNumber: MRTCK-6M
This Set Includes Following: 2 X Step Blocks 2 X Tee Bolts With Flanged Nut 2 X Clamps Bolt Length: 55 Mm Overall & Bolt Thread M6.
This Will Fit Both The Horizontal & Tilting Model Of Our 3" (75 Mm) & 4" (100 Mm) Rotary - 4 Slots Table.
Features
- M6 Clamp kit -Suits to 3" & 4" Rotary Table
- This will fit both the Horizontal & Tilting model of our 3 (75 mm) & 4 (100 mm) Rotary - 4 Slots Table
- This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6
- See more on Amazon...
Brand: ASSORTS | Manufacturer: Global Tools
Weight: 500.00 Grams
See On Amazon #8
Precision 4" Inch/ 100 mm Tilting Rotary Table with MT2 Bore-Milling Indexing Machine
Asin: B077M77WQY | Model: RT309580 | PartNumber: RT309580 | Ean: 0061016154880 | UPC: 061016154880
Height When Laid Horizontal Is 64 Mm Approx..
Winding Handle Is Graduated 0-10 Degrees In 5 Minute Divisions,Which Can Be Disengaged Easily For Free Rotation Of The Table..
Features
- TABLE IS GRADUATED 0-360 DEGREES IN 5 DEGREE DIVISIONS,
- WINDING HANDLE IS GRADUATED 0-10 DEGREES IN 5 MINUTE DIVISIONS,WHICH CAN BE DISENGAGED EASILY FOR FREE ROTATION OF THE TABLE.
- HEIGHT WHEN LAID HORIZONTAL IS 64 MM APPROX.
- See more on Amazon...
Brand: ADI | Manufacturer: ADI
Warranty: 3 Months
See On Amazon #9
ASSORTS's 80 mm Round Vice for 3" (80 mm) & 4" (100 mm) Rotary Milling Indexing Table with 3 x M6 T nuts Bolts-Engineering Tools
Asin: B01NCXUFAP | Model: CIRV-80 | PartNumber: CIRV-80 | Ean: 9019753511306
These Vices Are Counter- Drilled In A Manner That These Can Fit To A 3 As Well 4 Slot Table..
The Moving Jaw Has V-Grooves To Hold Round Objects. Precisely Ground On Base,Top, Jaws & Base. Rest Body Is Painted For A Long Rust Free Life..
Diameter Of Base : 80 Mm * Jaw Width : 54 Mm * Jaw Depth: 20 Mm * Jaw Opening : 32 Mm * Height : 29 Mm.
Features
- Made form Quality close grain Caste Iron -Designed to fit our 3" (75 mm) & 4"(100 mm) Rotary Tables
- Diameter of Base : 80 mm * Jaw Width : 54 mm * Jaw Depth: 20 mm * Jaw Opening : 32 mm * Height : 29 mm
- These vices are counter- drilled in a manner that these can fit to a 3 as well 4 slot table.
- The moving jaw has V-grooves to hold Round objects. Precisely Ground on Base,Top, Jaws & Base. Rest Body is painted for a long rust free life.
- See more on Amazon...
Brand: ASSORTS | Manufacturer: Global Tools
Dimensions: 1.20 x 5.20 x 4.60 inches | Weight: 15.43 pounds
See On Amazon #10
Precision Quality 4"/ 100 Mm Tilting Milling Indexing Rotary Table With Suitable M6 Clamp Kit & Round Vice-metalworking Engineering Machine Tools (With 65 Mm 3 Jaw Self Centering)
Asin: B07DLLC29X | Ean: 8903562967069
Worm Gear Ration Is 1:36 Which Means That 1 Handle Rotation Shall Turn The Table By 10 Degrees..
Supplied With A Suitable Small Chuck With Back Plate & Fixing T Nuts Bolts.
Features To Tilt And Locked At Any Angle From 0 To 90 Degrees..
Features
- Precision Quality 4" /100 Mm Tilting Rotary Milling Indexing Rotary Table
- Features To Tilt And Locked At Any Angle From 0 To 90 Degrees.
- Worm Gear Ration Is 1:36 Which Means That 1 Handle Rotation Shall Turn The Table By 10 Degrees.
- Supplied With A Suitable Small Chuck With Back Plate & Fixing T Nuts Bolts
- See more on Amazon...
Brand: ASSORTS | Manufacturer: ASSORTSMACHINETOOLS
See On Amazon #11
4" (100 mm) Horizontal Vertical Tilting 0 - 90 Rotary Table- Milling Machine Tool
Asin: B074Y7RRN6 | Ean: 8944825629355
Rotary Tables Deliver Precise, Continuous Rotating Motion For Scanning, Assembly, Testing And Production..
The Tables Use A Rugged Worm And Gear Drive Design With A Central Rotating Ball Bearing..
They Are A Convenient, Accurate Method Of Quickly Positioning A Payload..
Table Graduated 360 Degrees In 5 Degree Divisions..
Features
- Horizontal & Vertical Rotary Table 4" Table height 66 mm in flat position
- Table graduated 360 degrees in 5 degree divisions.
- Rotary Tables deliver precise, continuous rotating motion for scanning, assembly, testing and production.
- They are a convenient, accurate method of quickly positioning a payload.
- The tables use a rugged worm and gear drive design with a central rotating ball bearing.
- See more on Amazon...
Brand: ADI | Manufacturer: ADI
Weight: 10.91 pounds
See On Amazon #12
Rotary Table for Milling Machines 4" Inches (100mm) 4 Slots Horizontal and Vertical with with M6 Clamp Kit for Engineering Tools
Asin: B0B93NVH31 | Model: 4ROTARYKIT | PartNumber: 4ROTARYKIT
Can Be Mounted Both In Horizontal & Vertical Position || Table Is Graduated 360 Degrees. Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees..
This Set Includes Following: 2 X Step Blocks 2 X Tee Bolts With Flanged Nut 2 X Clamps Bolt Length: 55 Mm Overall & Bolt Thread M6.
M6 Clamp Kit -Suits To 3"" Inches Rotary Table.
High Precision Quality Made Low Profile Rotary Table || Center Height In Vertical Position: 2-1/16"" (50 Mm Approx) Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero.
Features
- A great combo of 4""/ 100 mm Rotary table with M6 clamp Kit.
- High Precision Quality Made Low Profile Rotary Table || Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero
- Can be mounted both in Horizontal & vertical position || Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
- M6 Clamp kit -Suits to 3 inches Rotary Table
- This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6
- See more on Amazon...
Brand: RAHISH TOOLS | Manufacturer: RAHISH TOOLS
See On Amazon #13
Rotary Table for Milling Machines 4" Inches (100mm) 4 Slots Horizontal and Vertical with 70mm 4 Jaw Independent Dog Chuck with Back Plate and T-nuts with m6 clamp kit
Asin: B0B93N245C | Model: 4ROTARY70KIT | PartNumber: 4ROTARY70KIT
Can Be Mounted Both In Horizontal & Vertical Position || Table Is Graduated 360 Degrees. Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees..
M6 Clamp Kit -Suits To 3"" Inches Rotary Table || This Set Includes Following: 2 X Step Blocks 2 X Tee Bolts With Flanged Nut 2 X Clamps Bolt Length: 55 Mm Overall & Bolt Thread M6.
70Mm 4 Jaw Independent Chuck M14 X 1 Mounting Thread || Back Plate Also Has M14 X 1 Thread Spigot To Mount The Chuck On It || Back Plate Is Drilled In A Manner That It Can Be Fitted Only To 4 Slot Rotary Table || Suitable T -Nuts Are Also Supplied.
High Precision Quality Made Low Profile Rotary Table || Center Height In Vertical Position: 2-1/16"" (50 Mm Approx) Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero || Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Features
- A great combo of 4""/ 100 mm Rotary table with 70 mm 4 Jaw Independent Chuck with back plates & Tnuts along with M6 clamp kit - A perfect milling combo for smaller mills.
- High Precision Quality Made Low Profile Rotary Table || Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero || Hand wheel is graduated in divisions of 10 min & can be set to zero.
- Can be mounted both in Horizontal & vertical position || Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
- 70mm 4 Jaw Independent Chuck M14 x 1 mounting Thread || Back Plate also has M14 x 1 thread Spigot to mount the Chuck on it || Back Plate is drilled in a manner that it can be fitted ONLY to 4 Slot Rotary Table || Suitable T -nuts are also supplied
- M6 Clamp kit -Suits to 3 inches Rotary Table || This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6
- See more on Amazon...
Brand: RAHISH TOOLS | Manufacturer: RAHISH TOOLS
See On Amazon #14
VEVOR Dividing Head, K11-100mm 3-Jaw Chuck, CNC Router Milling Machine Rotational Axis 4th Axis A Axis Indexing Head, 2.6"/65 mm Center Height MT2 Tailstock 6:1 Gear Ratio, Universal for Engraving
Asin: B0CW1QKJYP | Model: BS4-KP100-57 | PartNumber: BS4-KP100-57 | Ean: 0197988631439 | UPC: 197988631439
Stepper Motor Excellence: Equipped With The Nema23 2-Phase Stepper Motor, It Measures A Compact 2.2X2.2X2.2 Inches (57X57x56 Mm) And Features Four Leads. This Motor Delivers Precise Positional Control With A Robust Internal Structure, Ensuring High Reliability And Durability Even During Extended Operation. Trust In Its Performance For The Long Haul..
3-Jaw Chuck Mastery: Our K11-100Mm 3-Jaw Chuck Uniformly Secures Various Types Of Workpieces With Formidable Clamping Force. It Comes Complete With 3 Internal And 3 External Jaws, Accommodating A Maximum Clamping Diameter Of 0.08 To 1.18'' (2 To 30Mm) For Internal Jaws And 1.18 To 3.15'' (30 To 80Mm) For External Jaws. Changing Jaws Is A Breeze, Ensuring That Your Workpiece Maintains Precise Positioning And Orientation Throughout The Machining Process..
Rock-Solid Construction: The Indexing Head Milling's Exterior Is Crafted From Robust 6061 Aluminum Alloy, Treated With An Anodized Surface Finish For Exceptional Wear And Corrosion Resistance, Which Ensures The Protection Of Internal Components From The Harshest Environmental Conditions, Providing Longevity And Reliability You Can Count On..
Precision At Its Best: With A 6:1 Reduction Ratio, Our Indexing Dividing Head Lowers The Motor's Rotation Speed, Providing A Broader Range Of Indexing Angles For Your Machining Tasks. It Assists In Precisely Positioning Workpieces To Achieve The Desired Angles, Ultimately Enhancing Machining Accuracy. Additionally, The Reduction In Speed Ensures Smoother Motor Operation, Reducing Machine Vibrations And Noise For A Quieter And More Refined Workspace..
Features
- CNC Rotational Axis 4th Axis: Transform your CNC machine with the capability to carve from various angles and positions, effortlessly processing complex parts with curves or angular features. Featuring a K11-100mm 3-jaw chuck, this dividing head for milling machine boasts an inner through-hole diameter of 0.9"/22 mm and a center height of 2.6"/65 mm, enabling you to tackle intricate designs with ease and precision.
- Precision at its Best: With a 6:1 reduction ratio, our indexing dividing head lowers the motor's rotation speed, providing a broader range of indexing angles for your machining tasks. It assists in precisely positioning workpieces to achieve the desired angles, ultimately enhancing machining accuracy. Additionally, the reduction in speed ensures smoother motor operation, reducing machine vibrations and noise for a quieter and more refined workspace.
- Stepper Motor Excellence: Equipped with the Nema23 2-phase stepper motor, it measures a compact 2.2x2.2x2.2 inches (57x57x56 mm) and features four leads. This motor delivers precise positional control with a robust internal structure, ensuring high reliability and durability even during extended operation. Trust in its performance for the long haul.
- Rock-Solid Construction: The indexing head milling's exterior is crafted from robust 6061 aluminum alloy, treated with an anodized surface finish for exceptional wear and corrosion resistance, which ensures the protection of internal components from the harshest environmental conditions, providing longevity and reliability you can count on.
- 3-Jaw Chuck Mastery: Our K11-100MM 3-jaw chuck uniformly secures various types of workpieces with formidable clamping force. It comes complete with 3 internal and 3 external jaws, accommodating a maximum clamping diameter of 0.08 to 1.18'' (2 to 30mm) for internal jaws and 1.18 to 3.15'' (30 to 80mm) for external jaws. Changing jaws is a breeze, ensuring that your workpiece maintains precise positioning and orientation throughout the machining process.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 4.53 x 8.27 x 6.50 inches | Weight: 17.64 Pounds
See On Amazon #15
BestEquip Rotary Table 4inch(100mm) Horizontal Vertical Milling Table 2/5inch(10mm) 4-Slot Milling Rotary Table MT-2 Rotary Table for Milling with Indexing Plate Set for Precision Milling Drilling
Asin: B082BLRQ22 | Model: V12 | PartNumber: V12 | Ean: 0700721022199 | UPC: 700721022199
Excellent Precision: The Precision Rotary Table Indexing Plate Can Be Graduated 360 Degrees. Resetting Dial And Hand Wheel Can Be Graduated In Seconds..
Multiple Application: With A Set Of Wrench And Set Of Screws, The Power Milling Machines Are Widely Used In Milling Machine Like Index Boring, Milling, Circle Cutting, Spot Facing And Boring Hole And So On. Practical Design Can Meet A Variety Of Workshop Work Needs..
Convenient To Adjust: The Dial Is Marked With An Accurate Scale. Just Operate The Control Handle And Adjust It To The Desired Position, Which Makes It Possible To Use It Easily And Conveniently..
Remarkable Quality: Cast Iron Mainly Used To Cast Parts Subjected To Pressure And Vibration On Mechanical Equipment, Offering Rotary Table For Milling Durability, Shock Absorption And Heat-Resistantance..
Features
- Vertical & Horizontal: Our rotary table for milling machine is 4"/100mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience.
- Remarkable Quality: Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance.
- Excellent Precision: The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds.
- Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently.
- Multiple Application: With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs.
- See more on Amazon...
Brand: BestEquip | Manufacturer: BestEquip
Dimensions: 9.80 x 16.50 x 13.00 inches | Weight: 20.11 pounds
See On Amazon #16
Milling Indexing 4"/ 100 Rotary Table Precision Horizontal Vertical With Suitable M6 Clamp Kit & Small Chuck (With 65 Mm 3 Jaws Self Centering Chuck)
Asin: B07D82TBLS | Model: 45676 | PartNumber: 45676 | Ean: 8903562970748
Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees. A Tool Steel Back Plate Is Supplied With Fixing T Nuts To Mount The Chuck On It. Back Plate Is Drill In A Manner That It Will Fit Both 3 As Well As 4 Slots Table. The Back Side Of The Plate Has A Locating Spigot To Center The Mounting On To The Table..
It Can Be Mounted Both In Horizontal & Vertical Position. Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
Chuck Body Is Grain Sg Caste Iron & Jaws Are Of Tool Steel. Jaws Are Hardened & Ground..
Features
- Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit
- Chuck Body is Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground.
- Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table.
- It can be mounted both in Horizontal & vertical position. Hand wheel is graduated in divisions of 10 min & can be set to zero.
- See more on Amazon...
Brand: ASSORTS | Manufacturer: ASSORTSMACHINETOOLS
See On Amazon #17
OMEX New Rotary Table Horizontal & Vertical 4" / 100MM For Milling Machine
Asin: B01CGB91QY
Table Is Graduated 360 Degrees. Worm Gear Ratio -1:36, Which Means That The 1 Handle Rotation Shall Turn The Table By 10 Degrees..
Free - T Slot Cleaner With Table. Boxed Packed..
Center Height In Vertical Position: 2-1/16" (50 Mm Approx) Hand Wheel Is Graduated In Divisions Of 10 Min & Can Be Set To Zero..
New Very High Quality 4" /100 Mm Regular Rotary Table Designed For Smaller Milling Machines. Can Be Mounted Both In Horizontal & Vertical Position..
Features
- OMEX New Rotary Table Horizontal & Vertical 4" / 100MM For Milling Machine
- New Very High Quality 4 /100 mm Regular Rotary Table designed for smaller milling machines. Can be mounted both in Horizontal & vertical position.
- Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
- Center Height in vertical position: 2-1/16 (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero.
- Free - T Slot Cleaner With Table. Boxed Packed.
- See more on Amazon...
Brand: AI | Manufacturer: OMEX
See On Amazon #18
4" Inch (100 mm) Rotary Table 4 Slot for Milling Machine with M6 clamp kit
Asin: B07DG2B5YF | Ean: 8903564941265
Table 36-1 Ratio, Which Means One Turn Of The Handle Rotate 10 Degree Of The Table..
Supplied With A M6 Thread Clamp Kit-Suitable For Work Hold/ Clamping On This Table..
Vertical Clamping Unit Horizontal Only 53 Mm. Table Calibrated 0-360 Degrees.
Features
- 4" (100 mm) SMALL MINI ROTARY TABLE 4 SLOTS. SUPPLIED WITH M6 CLAMP KIT.
- VERTICAL CLAMPING UNIT HORIZONTAL ONLY 53 mm. TABLE CALIBRATED 0-360 DEGREES
- TABLE 36-1 RATIO, WHICH MEANS ONE TURN OF THE HANDLE ROTATE 10 DEGREE OF THE TABLE.
- SUPPLIED WITH A M6 THREAD CLAMP KIT-SUITABLE FOR WORK HOLD/ CLAMPING ON THIS TABLE.
- See more on Amazon...
Brand: AD INTERNATIONAL | Manufacturer: ADI
Dimensions: 4.33 x 9.06 x 9.06 Inches
Warranty: 3 Months
See On Amazon #19
ASSORTS's Quality 100 mm Round Vice For 4" (100 mm) Rotary Milling Indexing Table with 3 x M6 T nuts Bolts-Engineering Tools
Asin: B01N9UESEL | Model: CIRV-100 | PartNumber: CIRV-100
Vice Is Counter Drilled In A Manner That It Can Fit To Both 3 As Well As 4 Slots Rotary Table.
The Moving Jaw Has V-Grooves To Hold Round Objects..
* Diameter Of Base : 105 Mm * Jaw Width : 75 Mm * Jaw Depth: 21 Mm * Jaw Opening : 40 Mm * Height : 32 Mm.
Designed To Fit Our 4" (100 Mm) Regular & Tilting Models Of Rotary Table.
Features
- 100 mm Diameter Caste Iron Round Vise vice -Made from Close grain Caste Iron
- Designed to fit our 4 (100 mm) Regular & tilting models of Rotary Table
- Vice is counter drilled in a manner that it can fit to both 3 as well as 4 Slots Rotary Table
- * Diameter of Base : 105 mm * Jaw Width : 75 mm * Jaw Depth: 21 mm * Jaw Opening : 40 mm * Height : 32 mm
- The moving jaw has V-grooves to hold Round objects.
- See more on Amazon...
Brand: ASSORTS | Manufacturer: Global Tools
Weight: 2.50 Kilograms
See On Amazon #20
Assorts 4" Inches (100 mm) 4 slots Tilting Rotary Table for Milling Machines
Asin: B01MR6L9FH | Model: MRT-4T | PartNumber: MRT-4T
Brand: ASSORTS | Manufacturer: Global Tools
Weight: 6.61 pounds
See On Amazon
Looking For Something Else?
Search