ABN Wheel Stud Installer Tool, Wheel Lug Bolt Remover Broken Stud Extractor, Damaged Bolt Remover, Tire Stud Tool
Asin: B07D9V5Y45 | Model: 0734 | PartNumber: 0734 | Ean: 0811498030734 | UPC: 811498030734
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Great Fit For Your Vehicle: This Car Stud Socket Tool Can Fit Studs Up To 9/16” (1.4Cm) In Diameter; Abn Also Offers A Truck Version That Can Fit Up To 7/8” (2.2Cm) In Diameter; This Tool Is Also Noted To Work With Hubs, Rotors And Axles On Both Front And Rear Wheel Drive Vehicles.
Cheap, Accurate, Safe: The Wheel Stud Socket Tool Is Designed To Be Incredibly Easy To Use In Comparison To Other Wheel Lug Stud Installation Tools; Not Only Is It Cheaper Than Taking To A Mechanic Or Using A Hydraulic Press, But It Is Also More Accurate Than Using Cheaper Options Like Washers Or Nuts; Using This Tool Is Also Safer And Faster Than Some Of The Other Options Available.
Easy To Use: The Lug Stud Installer Tool Is A Damaged Bolt Remover And Extractor Tool That Is Designed To Be Easy To Use; Use The Broken Bolt Extractor Set To Remove The Problem Stud; Pop The New Stud From The Back Of The Empty Hole On Your Hub, Slide On The Abn Installer Tool And Tighten Using An Impact Wrench Or Ratchet.
Heavy Duty: Abn’S Wheel Stud Puller Installer Tool Is Designed To Make Replacing Damaged Bolts, Broken Lug Nuts, Stripped And Rusted Studs A Breeze; The Stud Kit Is Equipped With A Heavy Duty Thrust Bearing To Easily Pull The New Wheel Studs Into Place; Thanks To The Flat Bottom Design, It Ensures That The Stud Is Fully Seated And That No Damage Is Done To The Threaded Portion Of The Stud.
Features
- ROTATING BEARING PREVENTS DAMAGE: While other installation methods use washers or nuts to pull a stud into place, doing so can put excessive strain on the stud and can cause it to stretch and fatigue which can lead to premature failure; This Bolt Installation Tool is designed with a rotating bearing that rides on the hub so that the bolt slides easily and accurately into place; Rotating design prevents damage by eliminating friction that other methods can cause
- HEAVY DUTY: ABN s Wheel Stud Puller Installer Tool is designed to make replacing damaged bolts, broken lug nuts, stripped and rusted studs a breeze; The stud kit is equipped with a heavy duty thrust bearing to easily pull the new wheel studs into place; Thanks to the flat bottom design, it ensures that the stud is fully seated and that no damage is done to the threaded portion of the stud
- GREAT FIT FOR YOUR VEHICLE: This car stud socket tool can fit studs up to 9/16 (1.4cm) in diameter; ABN also offers a truck version that can fit up to 7/8 (2.2cm) in diameter; This tool is also noted to work with Hubs, Rotors and Axles on Both Front and Rear Wheel Drive Vehicles
- EASY TO USE: The lug stud installer tool is a damaged bolt remover and extractor tool that is designed to be easy to use; Use the broken bolt extractor set to remove the problem stud; Pop the new stud from the back of the empty hole on your hub, slide on the ABN Installer Tool and tighten using an impact wrench or ratchet
- CHEAP, ACCURATE, SAFE: The wheel stud socket tool is designed to be incredibly easy to use in comparison to other wheel lug stud installation tools; Not only is it cheaper than taking to a mechanic or using a hydraulic press, but it is also more accurate than using cheaper options like washers or nuts; Using this tool is also safer and faster than some of the other options available
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 6.00 x 2.80 x 1.20 inches | Weight: 0.00 Pounds
See On Amazon Similar To ABN Wheel Stud Installer Tool
#1
22800 Wheel Stud Installer,Wheel Stud Installer Tool,Safe, Saves Time, Effort,Tire Stud Tool,Wheel Stud Installer Replace,Compatible with Most All Automotive Wheels and Light-Duty Truck Wheel Stud
Asin: B0BV6NS1YW | Model: LZAZQ001 | PartNumber: LZAZQ001
[Features] It Is Easy To Install New Wheel Studs, And Use A Ratchet Or Impact Wrench To Firmly Pull The New Studs In Place..
[Easy To Use] First, Pull The New Stud Firmly Into Place. Next, Place The Tool On The Stud Shaft. Finally, Tighten The Lug Nut Tool To Pull The Stud In Place. Vehicle Studs Are Often Too Long, This Tool Will Help..
[Easy To Use] First, Pull The New Stud Firmly Into Place. Next, Place The Tool On The Stud Shaft. Finally, Tighten The Lug Nut Tool To Pull The Stud In Place. Vehicle Studs Are Often Too Long, This Tool Will Help..
[Applicable] 22800 Wheel Stud Installation Tool Is Compatible With Almost All Vehicle Wheels And Light Truck Wheel Studs, And Is Applicable To Most Car Suv Rv Light Truck Wheel Studs..
Features
- [High Quality Material] Our wheel stud installer is made of high quality carbon steel and its surface is oxidized and rust-proof. Strong and wear-resistant, long service life.
- [Applicable] 22800 wheel stud installation tool is compatible with almost all vehicle wheels and light truck wheel studs, and is applicable to most car SUV RV light truck wheel studs.
- [Features] It is easy to install new wheel studs, and use a ratchet or impact wrench to firmly pull the new studs in place.
- [Easy to Use] First, pull the new stud firmly into place. Next, place the tool on the stud shaft. Finally, tighten the lug nut tool to pull the stud in place. Vehicle studs are often too long, this tool will help.
- [Easy to Use] First, pull the new stud firmly into place. Next, place the tool on the stud shaft. Finally, tighten the lug nut tool to pull the stud in place. Vehicle studs are often too long, this tool will help.
- See more on Amazon...
Brand: AOCISKA | Manufacturer: AOCISKA
Warranty: no
See On Amazon #2
Lisle 22800 Wheel Stud Installer
Asin: B000ETUD22 | Model: 22800 | PartNumber: 22800
Ean: 0753956448821, 0830452280046, 0853585600079, 0971475286070, 0604945306083, 0083045228004, 7355117528262, 0013222028165
UPC: 604945306083, 083045228004, 830452280046, 753956448821, 013222028165, 853585600079, 971475286070
Works On Most All Automotive And Light-Duty Truck Wheel Studs, Import And Domestic.
Position The Tool Over The Stud Shaft.
Tighten The Lug Nut Against The Tool To Pull The Stud In Place.
Features
- Use with a ratchet or impact wrench to pull the new stud securely in place
- Tighten the lug nut against the tool to pull the stud in place
- Works on most all automotive and light-duty truck wheel studs, import and domestic
- Position the tool over the stud shaft
- See more on Amazon...
First Available: 01/18/2014
Brand: Lisle | Manufacturer: Lisle
Dimensions: 1.25 x 7.50 x 4.75 inches | Weight: 0.05 pounds
Warranty: Lifetime Warranty - does not cover abuse or misuse
See On Amazon #3
SoCiMa 22800 Wheel Stud Installer Replace Most All Automotive and Light-Duty Truck Wheel Studs
Asin: B09PNGG1Z1 | Model: 22800-US | PartNumber: 22800-US | Ean: 0761594428730 | UPC: 761594428730
【Features】Easily Installs New Wheel Studs，Use With A Ratchet Or Impact Wrench To Pull The New Stud Securely In Place..
【Perfect Service】Full Refund Or Free Return For Quality Problems.The Bearing Will Wear With Use And Is Not Warranted.If You Have Any Questions, Please Contact Us By Email, We Will Reply You Within 24 Hours..
【Note】Please Properly Verify The Year/Make/Model Before Purchasing This Product, In Avoid Of Unnecessary Charges..
【Adaptation Model】Compatible With Most All Automotive And Light-Duty Truck Wheel Studs..
Features
- Replace Part Number 22800
- Adaptation model Compatible with most all automotive and light-duty truck wheel studs.
- Features Easily Installs New Wheel Studs Use with a ratchet or impact wrench to pull the new stud securely in place.
- NOTE Please properly verify the Year/Make/Model before purchasing this product, in avoid of unnecessary charges.
- Perfect service Full refund or free return for quality problems.The bearing will wear with use and is not warranted.If you have any questions, please contact us by email, we will reply you within 24 hours.
- See more on Amazon...
Brand: SoCiMa | Manufacturer: Youjia
See On Amazon #4
ARES 70016 - Damaged Bolt and Stud Extractor Tool - Grips and Removes 1/4-Inch to 1/2-Inch Studs - Ideal for Broken, Rounded Off, Painted Over, and Rusted Tight Bolts
Asin: B01GKEBG9I | Model: 70016 | PartNumber: 70016 | Ean: 0635983559292, 0818765021235 | UPC: 818765021235, 635983559292
Application: Traditional Bolt Extractors Force The User To Guess The Size Of Damaged Studs, Stripping Damaged Screws And Shaving Metal Off Without Budging The Fastener. This Extractor Eliminates Guesswork By Adjusting And Clamping To The Bolt, Saving Hours Of Frustration On Broken Exhaust Manifolds, Oil Filler Plugs, Rounded Starter Bolts, Low Grade Bolts Left In Saltwater, Painted-Over Bolts, Rusted Tight Bolts, And More..
Aspca Business Ambassador: We Are Proud To Be Part Of The Aspca Business Ambassador Program. If You Have A Pet, You Realize They Are More Than A Pet, They Are Part Of The Family. With Your Support, We’Re Proud To Help This Great Organization.".
Reliable | Effective | Efficient: Users Trust Ares To Be Quality Tools That Make An Impact. You Are Backed By Our Performance Assurance Limited Lifetime Warranty. If You Have Any Issues With Your Ares Damaged Bolt And Stud Extractor Tool, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund..
Design: Manufactured With High-Grade Heat-Treated Alloy Steel For Maximum Durability, This Tool Also Features A Chrome Finish For Additional Rust And Corrosion Protection, With A Knurled Grip For Extra Stability. The Universal Design Of This Bolt Extractor Clamps Down On The Damaged Stud For Stable And Secure Removal, And The Hexagonal Flat Can Also Be Used With Flat Wrenches, Adjustable Wrenches, Sockets, And Locking Pliers..
Features
- SPECIFICATIONS: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets, quickly and easily removing damaged bolts and studs more efficiently than standard bolt extractors. This bolt extractor fits 1/4 - 1/2-inch (6 - 12mm) studs.
- DESIGN: Manufactured with high-grade heat-treated alloy steel for maximum durability, this tool also features a chrome finish for additional rust and corrosion protection, with a knurled grip for extra stability. The universal design of this bolt extractor clamps down on the damaged stud for stable and secure removal, and the hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers.
- APPLICATION: Traditional bolt extractors force the user to guess the size of damaged studs, stripping damaged screws and shaving metal off without budging the fastener. This extractor eliminates guesswork by adjusting and clamping to the bolt, saving hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts, and more.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Damaged Bolt and Stud Extractor Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we re proud to help this great organization.
- See more on Amazon...
Brand: ARES | Manufacturer: ARES
Warranty: Performance Assurance Limited Lifetime Warranty
See On Amazon #5
GEARWRENCH 8 Pc. Stud Removal Set, SAE/Metric - 41760D
Asin: B000K1KHB6 | Model: 41760D | PartNumber: 41760D | Ean: 0082171417603, 0787721789154 | UPC: 787721789154, 082171417603
Blow Molded Case For Tool Retention And Durable Storage.
Auto-Locking Feature Allows The Tap Adapters To Be Removed Safely.
3/8" And 1/2" Drives Included.
Designed And Tested To Reach Studs In Difficult Work Areas.
Features
- Complete SAE and metric stud Remover set offer the best professional extractors available
- Designed and tested to reach studs in difficult work areas
- Blow molded case for tool retention and durable storage
- 3/8 And 1/2 Drives included
- Auto-locking feature allows the tap adapters to be removed safely
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: GEARWRENCH
Dimensions: 2.00 x 6.00 x 4.00 inches | Weight: 1.20 Pounds
Warranty: Standard Limited Lifetime
See On Amazon #6
PEATOVIE Wheel Stud Installer Tool Replace 22800 Suitable for Most Light-Duty Truck Automotive Car Wheel Studs
Asin: B0BY2387GM | Model: Mekar-23031001 | PartNumber: Mekar-23031001
【Material】: Made Of High-Quality Steel. With Abrasion Resistance, Anti-Oxidation And Rust Resistance. Have A High -Strength Reliability And A Long-Term Service Life..
【Pacakge】: 1Pc Wheel Stud Installer Tool. ------Guarantee: One-Year Warranty Service. Any Problem About The Product, Please Feel Free To Contact Us, We Will Reply Asap..
【Easy To Use】: Can Be Used With A Ratchet Or Impact Wrenches. First, Install The New Wheel Stud Tool On The Thread Shaft That Needs To Be Replaced; Then Tighten It; Last, Use The Ratchet Or Impact Wrench To Fix The Wheel Stud To The Appropriate Position..
【Replace Part Number】: 22800. Perfect Replace For Wheels Of Damaged, Peeling Or Rust..
Features
- Fitment : Suitable for Most Light-Duty Truck Automotive Car Wheel Studs.
- Replace Part Number : 22800. Perfect Replace for wheels of damaged, peeling or rust.
- Material : Made of high-quality steel. With abrasion resistance, anti-oxidation and rust resistance. Have a high -strength reliability and a long-term service life.
- Easy to Use : Can be used with a ratchet or impact wrenches. First, install the new wheel stud tool on the thread shaft that needs to be replaced; then tighten it; last, use the ratchet or impact wrench to fix the wheel stud to the appropriate position.
- Pacakge : 1PC Wheel Stud Installer Tool. ------Guarantee: One-Year Warranty Service. Any problem about the product, please feel free to contact us, we will reply asap.
- See more on Amazon...
Brand: PEATOVIE | Manufacturer: Mekar
Warranty: 1 year warranty
See On Amazon #7
WHEEL CONNECT Wheel Alignment Pin, M14X1.5 Wheel Hanger, Rim Stud Pilot Pin,Guide Studs. Tool for Changing Tires on Cars with Lug Bolts. Made of Stainless Steel.Metric 14 x 1.50.
Asin: B08LMF53L1 | Model: WAP14150 | PartNumber: WAP14150 | Ean: 0738628231390 | UPC: 738628231390
Made Of Solid Stainless Steel. It Is Hard Enough To Hold Any Size Of Tires..
Nice Plated Color With Laser Carved Size And Logo..
Metric 14 X 1.50 Thread, Please Select Right Thread For Your Car, If You Have No Idea About This, Please Message Us. We Will Check That For You..
Features
- [What is it for ] When you are taking down the last bolt of the tire, the tire will fall suddenly. And when you are installing the first bolt of tire, you will have problem of aligning the bolt with the bolt hole. This Wheel alignment tool can help you to hold and align tire during these cases.
- Metric 14 x 1.50 Thread, please select right Thread for your car, if you have no idea about this, please message us. We will check that for you.
- Made of solid stainless steel. It is hard enough to hold any size of tires.
- Nice plated color with Laser carved size and LOGO.
- See more on Amazon...
Brand: WHEEL CONNECT | Manufacturer: Wheel Conect
Dimensions: 0.55 x 4.72 x 0.55 inches | Weight: 0.22 pounds
See On Amazon #8
Motoforti Universal Wheel Stud Installer Tool, Tire Stud Tool, M12x1.25 M12x1.5 M14x1.5, Iron, with 3/4" Hex Wheel Lug Nuts, Silver Tone, 1 Set
Asin: B0BRXZTKVQ
Product Characteristics: Made Of Quality Material, Which Is Durable, Scratch-Resistant, Wear-Resistant, Oxidized-Resistant, Rust-Resistant For Long Time Use..
What You Get: 1 Set Wheel Stud Installer Tool.
How To Install: Direct Replace And Install Without Special Tools, Convenient To Use..
Features: Designed With Rotating Bearing, Which Can Prevents Damage To Studs..
Features
- Universal Fit: Suitable for most automotive, car, and Light-duty truck's Wheel Studs. With three hex wheel lug nut(M12x1.25, M12x1.5, M14x1.5).
- Features: Designed with rotating bearing, which can prevents damage to studs.
- Product Characteristics: Made of quality material, which is durable, scratch-resistant, wear-resistant, oxidized-resistant, rust-resistant for long time use.
- How to Install: Direct replace and install without special tools, convenient to use.
- What You Get: 1 Set Wheel Stud Installer Tool
- See more on Amazon...
Brand: Motoforti | Manufacturer: Motoforti
See On Amazon #9
RACOONA Wheel Stud Installer Tool,22800 Tire Stud Tool,Wheel Stud Installer, Safe, Durable,Car Accessories Car Wheel Studs,Compatible with Most All Automotive Wheels and Light-Duty Truck Wheel Stud
Asin: B0CJR89KG9 | Model: 1005LZAZQ002 | PartNumber: 1005LZAZQ002
[Advantages] The 2800 Wheel Stud Installation Tool Utilizes Bearing Rotation To Eliminate Frictional Torque, Effectively Preventing Damage To New Studs And Making Maintenance Easier. Safer, More Stable, And Of Higher Quality..
[Applicable] The Tire Stud Tool Is Suitable For Most Car And Light Truck Wheel Studs..
[Easy To Use] Our Wheel Screw Installation Tool Is Very Easy. Use A Ratchet Or Impact Wrench To Firmly Pull The New Wheel Studs In Place, Tighten The Tool To Pull The Studs In Place, And Place The Wheel Stud Tool On The Stud Shaft..
[Function] The Wheels Are The Only Contact Point Between Our Vehicle And The Road, Which Is Crucial For Vehicle Handling And Braking. Therefore, Wheel Stud Installation Tools Are Very Important..
Features
- [High Quality Materials]Our wheel bolt installer is made of high-quality carbon steel with a surface that is oxidized and rust resistant. Durable and durable, with a long service life.
- [Function] The wheels are the only contact point between our vehicle and the road, which is crucial for vehicle handling and braking. Therefore, wheel stud installation tools are very important.
- [Advantages] The 2800 wheel stud installation tool utilizes bearing rotation to eliminate frictional torque, effectively preventing damage to new studs and making maintenance easier. Safer, more stable, and of higher quality.
- [Easy to Use] Our wheel screw installation tool is very easy. Use a ratchet or impact wrench to firmly pull the new wheel studs in place, tighten the tool to pull the studs in place, and place the wheel stud tool on the stud shaft.
- [Applicable] The tire stud tool is suitable for most car and light truck wheel studs.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
Warranty: no
See On Amazon #10
ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit Puller Removal Set for GM, Ford, Chrysler Truck
Asin: B079P7ZLMT | Model: ABN-2183 | PartNumber: ABN-2183 | Ean: 0811498030338 | UPC: 811498030338
Fits Your Vehicle: For Use On Saginaw, Thompson, And Ford C111, C2 Power Steering Pumps Found On Ford, Gm, And Chrysler Vehicles; Two Included Screws For Use On Most Ford, Chrysler, Gm, And Volkswagen Vw Power Steering Pulleys Gm 3.1L, 3100, 3400 And 3800 V6 Engines Or 2.3Ll Quad 4 Four-Cylinder Engine, Ford 4.6L, 5.4L And 5.8L Modular V8 Engines, And More; Pulls Pulleys On Gm Belt-Driven Vacuum Pumps And Press-On Water Pump Pulleys On Gm V6 Engines.
Package Contents: Package Includes A Disconnect Tool, Bushing, Screw Set, And Carrying Case For Your Convenience; For Gm (1989+) 1T, 1/2T, And 3/4T Pickups.
Easy Storage: Heavy-Duty 9.3” X 2.1” X 5.5” Inch (23.6Cm X 5.3Cm X 14Cm) Plastic Blow-Molded Carrying Case For Easy Transportation, Safe Storage, And Quick Organization.
Easy To Use: We Recommend Using Lubrication On The Tools Before Use; Place The Threaded Screw In The Center Of Your Pulley With The Half-Moon Clamp Shells And Lip Retaining Ring Surrounding It, Then Place The Grabber Nut Center Piece With A Die On Top, Tightly Screw The Threaded Stud Onto The Center Of The End Of Your Puller Nut, And Then Use A Ratchet, Crescent Wrench, Or Air Gun With Socket To Loosen And Remove.
Features
- EFFORTLESSLY REMOVE POWER STEERING LINES: The ABN Automotive Power Steering Pump Pulley Remover Installer Tool Kit is a disconnect toolset that releases and installs the power steering line from the pump on most American domestic vehicles such as 1989 to current GM pickups 1T, 1/2T, and 3/4T; Fits pulley hubs with diameters of 1-1/8 inch , 1-1/4 inch , 1-5/16 inch, and 1-3/8 inch
- EASY TO USE: We recommend using lubrication on the tools before use; Place the threaded screw in the center of your pulley with the half-moon clamp shells and lip retaining ring surrounding it, then place the grabber nut center piece with a die on top, tightly screw the threaded stud onto the center of the end of your puller nut, and then use a ratchet, crescent wrench, or air gun with socket to loosen and remove
- FITS YOUR VEHICLE: For use on Saginaw, Thompson, and Ford C111, C2 power steering pumps found on Ford, GM, and Chrysler vehicles; Two included screws for use on most Ford, Chrysler, GM, and Volkswagen VW power steering pulleys GM 3.1L, 3100, 3400 and 3800 V6 Engines or 2.3lL QUAD 4 four-cylinder engine, Ford 4.6L, 5.4L and 5.8L modular V8 engines, and more; Pulls pulleys on GM belt-driven vacuum pumps and press-on water pump pulleys on GM V6 engines
- EASY STORAGE: Heavy-duty 9.3 x 2.1 x 5.5 inch (23.6cm x 5.3cm x 14cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
- PACKAGE CONTENTS: Package includes a disconnect tool, bushing, screw set, and carrying case for your convenience; For GM (1989+) 1T, 1/2T, and 3/4T pickups
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.10 x 9.30 x 5.50 Inches | Weight: 2.09 Pounds
See On Amazon #11
Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs
Asin: B07B3S1CJN | Ean: 0707943719128 | UPC: 707943719128
Safe Stud Extractor Tool: Spurtar Professional Tools Are For Commercial Or Occasional Use. Suitable For Safely Removing Broken Or Seized Bolts And Studs. 2 Holes 1/2" (14Mm) And 3/4" (19Mm) Allow For An Optimal Fit And Minimize Thread Damage.
Rounded Bolt Remover Unique Design: The Design Allows The Tool To Be Flush With The Mounting Surface Of The Stud, So It Can Grab A Stud That Breaks Off Very Close To The Mounting Surface..
Bolt Extractor Operation Guidance: Use With 1/2-Inch Drive Ratchet Wrench Or Flex Handle And Turn The Extractor To Engage The Cam And Stud To Tighten, Then Turn Until The Stud Is Removed..
Optimum Fit Stud Extractor: Knurled Roller Uses Cam Action To Grasp The Stud Firmly And Secures Optimum Fit While Minimizing Damage To Threads. Cam Rotates To Grip Onto The Stud For Quick And Easy Use. Help Easy Out Bolt Extractor Set Studs Quickly And Efficiently.
Features
- Heavy Duty Stud Master : Spurtar 1/2 inch drive stud puller, broken bolt extractor, nut remover suitable for 1/4 inch to 3/4 inch ( 6mm to 19mm ) studs from engine blocks, exhaust manifolds, cylinder heads, and other applications
- Optimum Fit Stud Extractor: Knurled roller uses cam action to grasp the stud firmly and secures optimum fit while minimizing damage to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently
- Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2 (14mm) and 3/4 (19mm) allow for an optimal fit and minimize thread damage
- Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed.
- Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very close to the mounting surface.
- See more on Amazon...
Brand: Spurtar | Manufacturer: King Company
Dimensions: 2.68 x 2.09 x 2.09 Inches
See On Amazon #12
OEMTOOLS 25438 Universal Stud Extractor, Damaged Bolt and Stud Extractor Tool, Manifold Stud Remover, Worn Screw Remover, Broken Stud Extractor
Asin: B08DL8F376 | Model: 25438 | PartNumber: 25438 | Ean: 0076812254382 | UPC: 076812254382
Any Which Way: The Square Drive Of The Stud Removal Tool Fits Manual Wrenches Or Ratchets; If You Prefer Flat Or Adjustable Sockets, Pliers, Or Wrenches, The Hex End Is For You.
Product Details: Universal Stud Extractor Fits Tools With 1/4"—1/2” (6—12Mm) Diameters; 3/8” Hex End Drive For Universal Wrench Or Ratchet Attachment.
Get A Grip: You Won’T Have To Chase After Runaway Stud Removers Again; Knurling Engraved On This Bolt Extractor Will Prevent Your Tools From Slipping Through Your Fingers.
Fits Like A Glove: It's Not Just For Studs; Turn To Your Universal Stud Remover When Grappling With Rusted Bolts, Stripped Hardware, And Chipped Or Broken Nuts.
Features
- Well Rounded: This rotating stud extractor ensures a picture perfect fit around the damaged stud; This universal stud remover tool can handle studs 1/4" 1/2 (6MM 12MM) in size
- Fits Like a Glove: It's not just for studs; Turn to your universal stud remover when grappling with rusted bolts, stripped hardware, and chipped or broken nuts
- Any Which Way: The square drive of the stud removal tool fits manual wrenches or ratchets; If you prefer flat or adjustable sockets, pliers, or wrenches, the hex end is for you
- Get a Grip: You won t have to chase after runaway stud removers again; Knurling engraved on this bolt extractor will prevent your tools from slipping through your fingers
- Product Details: Universal stud extractor fits tools with 1/4 1/2 (6 12MM) diameters; 3/8 hex end drive for universal wrench or ratchet attachment
- See more on Amazon...
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 1.70 x 6.70 x 3.70 inches
See On Amazon #13
Lusperi 22800 Wheel Stud Installer Tire Stud Tool Wheel Studs Replacement for Most All Automotive Wheels and Light-Duty Truck Wheel Stud Installer
Asin: B0BN8BYTFL | Model: 22800 | PartNumber: 22800
Easy To Use: Use A Ratchet Or Impact Wrench To Firmly Pull The New Stud Into Place, Place The Tool On The Stud Shaft, Tighten The Lug Nut Against The Tool, And Pull The Stud Into Place..
Promise: If You Are Not Satisfied With Our Products, You Can Get A 30-Day Refund Or If You Encounter Any Problems In Using Our Products, Please Feel Free To Contact Us And We Will Reply To You Within 24 Hours..
High-Quality :The Wheel Is The Only Contact Point Between The Vehicle And The Road, Which Is Crucial To Vehicle Handling And Braking. Therefore, It Is Very Important To Use The Wheel Stud Installation Tool..
Compatibility: 22800 Wheel Stud Installer Compatible With Most All Automotive Wheels And Light-Duty Truck Wheel Stud Installer.The Wheel Bolt Installation Tool Is Designed With A Swivel Bearing To Eliminate The Friction Generated During The Installation Process And Prevent Damage To The Stud. It Will Be Your Ideal Maintenance Tool.
Features
- Package content: 22800 Wheel Stud Installer 1PCS)
- Compatibility: 22800 Wheel Stud Installer Compatible with Most All Automotive Wheels and Light-Duty Truck Wheel Stud Installer.The wheel bolt installation tool is designed with a swivel bearing to eliminate the friction generated during the installation process and prevent damage to the stud. It will be your ideal maintenance tool
- Easy to use: Use a ratchet or impact wrench to firmly pull the new stud into place, place the tool on the stud shaft, tighten the lug nut against the tool, and pull the stud into place.
- High-quality :The wheel is the only contact point between the vehicle and the road, which is crucial to vehicle handling and braking. Therefore, it is very important to use the wheel stud installation tool.
- PROMISE: If you are not satisfied with our products, you can get a 30-day refund or if you encounter any problems in using our products, please feel free to contact us and we will reply to you within 24 hours.
- See more on Amazon...
Brand: Lusperi | Manufacturer: Lusperi
Dimensions: 1.00 x 1.57 x 1.57 Inches
Warranty: 1 year
See On Amazon #14
ABN Stud Extractor Set, Broken Stud Removal Socket 8-Piece SAE & Metric Stud Remover Set Stud Puller Sockets
Asin: B07FDLY1F3 | Model: ABN-4183 | PartNumber: ABN-4183 | Ean: 0811498034183 | UPC: 811498034183
Use Your Tools: Fits 3/8-Inch And 1/2-Inch Impact Wrench Or Ratcheting Wrench (Wrench Not Included); Reverse Your Ratchet To Use As Stud Installer.
Package Contents: Package Includes (8) Stud Removal Sockets – 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 6Mm, 8Mm, 10Mm, 12Mm And (1) Carrying Case For Your Convenience; 3/8-Inch And 1/2-Inch Socket Drives; Wrench Required, Not Included.
Easy Storage: Heavy-Duty 8.6” X 4.6” X 2” Inch (21.8Cm X 11.7Cm X 5.1Cm) Plastic Blow-Molded Carrying Case With Latch For Easy Transportation, Safe Storage, And Quick Organization; Each Compartment Is Permanently Etched With Sizing Information For Simple Identification.
Fits Your Application: Stud Remover Socket Kit Fits Studs That Are 1/4-Inch To 7/16-Inch (6Mm To 12Mm); Each Socket Has Permanently Etched Size For Quick Identification; Sae 3/8-Inch Drive Sockets – 1/4", 5/16"; Sae 1/2-Inch Sockets – 3/8", 7/16"; Metric 3/8-Inch Drive Sockets – 6Mm, 8Mm; Metric 1/2-Inch Drive Sockets – 10Mm, 12Mm.
Features
- EFFORTLESSLY REMOVE ANY STUD: The ABN Stud Remover Tool Kit 8pc Stud Extractor Kit will effectively work on threaded, broken, rusted, stripped, and smooth studs for ultimate versatility; Includes smooth internal paws that push into the fastener (more torque means greater applied force); No threads required
- FITS YOUR APPLICATION: Stud remover socket kit fits studs that are 1/4-inch to 7/16-inch (6mm to 12mm); Each socket has permanently etched size for quick identification; SAE 3/8-inch drive sockets 1/4, 5/16; SAE 1/2-inch sockets 3/8, 7/16; Metric 3/8-inch drive sockets 6mm, 8mm; Metric 1/2-inch drive sockets 10mm, 12mm
- USE YOUR TOOLS: Fits 3/8-inch and 1/2-inch impact wrench or ratcheting wrench (wrench not included); Reverse your ratchet to use as stud installer
- EASY STORAGE: Heavy-duty 8.6 x 4.6 x 2 inch (21.8cm x 11.7cm x 5.1cm) plastic blow-molded carrying case with latch for easy transportation, safe storage, and quick organization; Each compartment is permanently etched with sizing information for simple identification
- PACKAGE CONTENTS: Package includes (8) stud removal sockets 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch, 6mm, 8mm, 10mm, 12mm and (1) carrying case for your convenience; 3/8-inch and 1/2-inch socket drives; Wrench required, not included
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.00 x 8.60 x 4.60 inches | Weight: 1.19 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #15
Powerbuilt Stud Extractor Tool, Remove 1/4" to 3/4" Nuts, Broken, or Seized Studs, Grip Damaged Bolts- 648639, Silver
Asin: B002INQORU | Model: 648639 | PartNumber: 648639 | Ean: 0028907104874 | UPC: 028907104874
For Removing Broken Or Seized Studs, Bolts And The Like From 1/4 Inch To 3/4 Inch Diameter.
Knurled Roller Uses Cam Action To Grasp Stud Firmly While Minimizing Damage.
Use With 1/2 Inch Drive Ratchet.
Use With 1/2-Inch Drive Ratchet Handle Or Flex Handle.
For Removing Broken Or Seized Studs, Bolts And The Like From 1/4 Inch To 3/4 Inch Diameter.
Knurled Roller Uses Cam Action To Grasp Stud Firmly While Minimizing Damage.
Knurled Roller Uses Cam Action To Grasp Stud Firmly While Minimizing Damage.
Features
- For removing broken or seized studs, bolts from 1/4" to 3/4" diameter
- Knurled roller uses cam action to grasp stud firmly while minimizing damage
- For removing broken or seized studs, bolts and the like from 1/4 inch to 3/4 inch diameter
- Knurled roller uses cam action to grasp stud firmly while minimizing damage
- Use with 1/2-inch Drive Ratchet Handle or Flex Handle
- For removing broken or seized studs, bolts and the like from 1/4 inch to 3/4 inch diameter
- Knurled roller uses cam action to grasp stud firmly while minimizing damage
- Use with 1/2 inch drive ratchet
- See more on Amazon...
Brand: Powerbuilt | Manufacturer: Alltrade Tools, LLC
Dimensions: 5.75 x 2.00 x 3.88 Inches | Weight: 1.27 pounds
See On Amazon #16
Lisle 28950 Truck Wheel Stud Installer
Asin: B000LWA3OA | Model: 28950 | PartNumber: 28950 | Ean: 0830452895004, 0083045289500 | UPC: 083045289500, 830452895004
Use The Lug Nut To Tighten Against The Tool Body To Pull The Stud In Position.
Fit Type: Vehicle Specific.
The Tool Body Is Equipped With A Thrust Bearing To Easily Pull The New Wheel Stud Into Place.
Fits Truck Wheel Studs Up To 22 Millimeter (7/8") In Diameter.
Features
- Use with an impact wrench or ratchet
- Fits truck wheel studs up to 22 millimeter (7/8) in diameter
- Use the lug nut to tighten against the tool body to pull the stud in position
- The tool body is equipped with a thrust bearing to easily pull the new wheel stud into place
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 01/18/2014
Brand: Lisle | Manufacturer: Lisle
Dimensions: 1.25 x 7.50 x 4.75 inches | Weight: 0.09 Pounds
Warranty: Lifetime Warranty - does not cover abuse or misuse
See On Amazon #17
Bolaxin 22800 Tire Wheel Stud Installer Tool Replace for Most All Automotive and SUV RV Light-Duty Truck
Asin: B0BXD9HZPT | Model: BO-230303-Black | PartNumber: BO-230303-Black
{Easy Work} After Punching Out The Old Broken Stud And Inserting The New Stud, This Tool Was Very Easy To Place And Get The Lug Nut Started. Having A Bearing To Eliminate Friction When Tightening The Lug Nut Prevents The Galling When Using Washers Or A Larger Lug Nut. A Must Have Tool To Made This Stud Replacement Much Easier!.
{Packaged} 1* 22800 Wheel Stud. Having Any Questions, Contact To Us And Got An Ideal Reply Within 12 Hours. With A 360 Days Warranty..
{High Quality Material} Made Of High-Quality Carbon Steel With An Oxidized And Rust-Resistant Surface For A Long Service Life..
{Easy Installation} Works Perfectly To Install New Studs For Your Hubs. Positioning The Wheel Stud Tool On The New Stud Shaft That Needs To Be Replaced, Then Tighten The Lug Nuts And Use A Ratchet Or Impact Wrench To Pull The New Wheel Stud Into Place. Give You The Safest Driving Trip On The Road. You Also Can Search An Installation Video From Youtube To Help You Work Easier..
Features
- {Applicable} Replace for 22800 wheel stud installer fits for all automotive vehicle and SUV RV light-duty truck wheel studs.
- {Easy Installation} Works perfectly to install new studs for your hubs. Positioning the Wheel Stud Tool on the New Stud Shaft that needs to be replaced, then tighten the Lug nuts and use a ratchet or impact wrench to pull the new wheel stud into place. Give you the safest driving trip on the road. You also can search an installation video from Youtube to help you work easier.
- {Easy Work} After punching out the old broken stud and inserting the new stud, this tool was very easy to place and get the lug nut started. Having a bearing to eliminate friction when tightening the lug nut prevents the galling when using washers or a larger lug nut. A must have tool to made this stud replacement much easier!
- {High Quality Material} Made of High-quality Carbon Steel with an oxidized and rust-resistant surface for a long service life.
- {Packaged} 1* 22800 wheel stud. Having any questions, contact to us and got an ideal reply within 12 hours. With a 360 days warranty.
- See more on Amazon...
Brand: Bolaxin | Manufacturer: Antozon
Dimensions: 1.50 x 2.00 x 2.00 inches
See On Amazon #18
ZKTOOL10PC Wheel Alignment Pin,Wheel Fixing BoltsBlack Wheel Hanger Alignment Pin Guide Tool,Wheel Lug Bolt Automotive Mechanic Tool,Tool for Changing Tires on Cars with Lug Bolts,
Asin: B095VRWS5J | Ean: 0734541856788 | UPC: 734541856788
Material: Made Of Solid Alloy Steel. The Surface Is Coated With An Anti-Oxidation Layer, Which Is Durable And Will Not Bend..
How To Use: Screw The Four-Wheel Alignment Pin Tool Into The Hub; The Recessed Area On The Axle Prevents The Wheel From Slipping Off The Wheel Pegs; Simply Screw In The Remaining Nuts To Hold The Tire In Place..
Metric Thread Size: 2Pc M14 X1.25, 2Pc M14×1.5, 2Pc M12×1.25, 2Pc M12×1.5.2Pc M15*1.25.
Pros: When Removing The Last Bolt Of The Tire, The Tire Will Suddenly Fall. When You Install The First Bolt Of The Tire, You Will Have Problems With The Bolt Lining Up With The Bolt Hole. The Wheel Bolt Guide Pin Guide Tool Can Help You Hold And Align Your Tires In These Situations..
Features
- Features: The 10PC Wheel Holder makes it easier for you to mount your wheels and tires by aligning the wheel's lug holes with the hub so you don't have to worry about securing them to your car while you're trying to balance the wheel between your knees. The knurled end ensures a tight grip during installation and removal.
- Pros: When removing the last bolt of the tire, the tire will suddenly fall. When you install the first bolt of the tire, you will have problems with the bolt lining up with the bolt hole. The Wheel Bolt Guide Pin Guide Tool can help you hold and align your tires in these situations.
- Material: Made of solid alloy steel. The surface is coated with an anti-oxidation layer, which is durable and will not bend.
- Metric thread size: 2PC M14 x1.25, 2PC M14 1.5, 2PC M12 1.25, 2PC M12 1.5.2PC M15*1.25
- How to use: Screw the four-wheel alignment pin tool into the hub; the recessed area on the axle prevents the wheel from slipping off the wheel pegs; simply screw in the remaining nuts to hold the tire in place.
- See more on Amazon...
Brand: ZKTOOL | Manufacturer: ZKTOOL
Dimensions: 0.55 x 6.30 x 0.55 inches
See On Amazon #19
OEMTOOLS 24233 Wheel Stud Alignment Pin, 8-Piece Set, Wheel Alignment & Balancing Tools for Bolts, Euro Tool, Wheel Alignment Tool, Automotive Wheels
Asin: B01FYG6AJ4 | Model: 24233 | PartNumber: 24233 | Ean: 0076812137883 | UPC: 076812137883
Fits A Variety Of Vehicles: This Wheel Guide Tool Is Useful For Vehicles Without Bolts Or Studs, Including Older Models Of European Cars; Wheel Hanger Also Works With Many Newer Vehicles That Are Missing Bolts Or Studs.
Bonus Features: These Automotive Bolts Are Color Coded For Easy Identification Of The Wheel Stud Pilot Pin Set; Wheel Hangers Come In A Sturdy Blow Mold Case For Safe Keeping Once The Wheel Has Been Installed.
Multiple Sizes: This Wheel Alignment Tool Includes Two Sets Of The 12 Mm X 1.5, 12 Mm X 1.25, 14 Mm X 1.5, And 14 Mm X 1.25 Threaded Wheel Pins; Alignment Pins Work With Many Tire Wheels And Vehicles.
Prevents Injury And Damage: These Hanger Bolts Align The Holes And Secure The Wheel To The Hub; Minimize The Risk Of Injuries And Damage By Preventing The Tire Wheel From Falling; Eliminate The Struggle To Balance The Wheel Studs.
Features
- FAST AND EASY USE: This tire changing tool set makes installing wheels much easier on vehicles that use wheel bolts instead of studs or lug nuts; Tire hanger works when replacing damaged or broken bolts
- PREVENTS INJURY AND DAMAGE: These hanger bolts align the holes and secure the wheel to the hub; Minimize the risk of injuries and damage by preventing the tire wheel from falling; Eliminate the struggle to balance the wheel studs
- FITS A VARIETY OF VEHICLES: This wheel guide tool is useful for vehicles without bolts or studs, including older models of European cars; Wheel hanger also works with many newer vehicles that are missing bolts or studs
- MULTIPLE SIZES: This wheel alignment tool includes two sets of the 12 mm x 1.5, 12 mm x 1.25, 14 mm x 1.5, and 14 mm x 1.25 threaded wheel pins; Alignment pins work with many tire wheels and vehicles
- BONUS FEATURES: These automotive bolts are color coded for easy identification of the wheel stud pilot pin set; Wheel hangers come in a sturdy blow mold case for safe keeping once the wheel has been installed
- See more on Amazon...
First Available: 02/14/2017
Brand: OEMTOOLS | Manufacturer: OEMTOOLS
Dimensions: 1.60 x 10.20 x 4.80 inches | Weight: 2.05 pounds
Warranty: OEMTOOLS Limited Lifetime
See On Amazon #20
Osilly 22800 Wheel Stud Installer, Replace Most All Automotive and Light-Duty Truck Wheel Studs, Auto Tire Stud Installer Tool Replacement, Car Accessories, Safe, Saves Time, Effort
Asin: B0CJF2FW2H | Model: Wheel Stud Installer | PartNumber: Wheel Stud Installer
【Material】: Our Car Wheel Stud Installer Is Made Of Metal Iron, High Quality, Strong, Reliable And Wear-Resistant. The Surface Is Oxidized To Prevent Rust, Corrosion Resistance And Long Service Life..
【Use】: First, Use A Ratchet Or Impact Wrench To Tighten The New Stud Into Place. Then, Place The Tool On The Stud Shaft. Finally, Tighten The Nut Tool To Pull The Stud Into Place. Vehicle Studs Are Often Too Long And This Installer Tool Will Help..
【Application】: This Installer Has An Inner Diameter Of 0.6", An Outer Diameter Of 1.6" And A Height Of 0.8". Compatible With Almost All Automotive And Light-Duty Truck Wheel Studs, Suitable For Most Car, Suv, Rv, Light Truck Wheel Studs..
【Function】: It Can Help You Install New Car Wheel Stud Easily. Featuring A Swivel Bearing Design, It Eliminates Friction During Installation And Prevents Damage To The Studs. Ideal Maintenance Tool For Most Drivers..
Features
- Specifications : The replacement part number for the wheel stud installer tool is 22800. Please buy it according to the part number to prevent this product from not fitting your car.
- Function : It can help you install new car wheel stud easily. Featuring a swivel bearing design, it eliminates friction during installation and prevents damage to the studs. Ideal maintenance tool for most drivers.
- Material : Our car wheel stud installer is made of metal iron, high quality, strong, reliable and wear-resistant. The surface is oxidized to prevent rust, corrosion resistance and long service life.
- Application : This installer has an inner diameter of 0.6, an outer diameter of 1.6 and a height of 0.8. Compatible with almost all automotive and light-duty truck wheel studs, suitable for most car, SUV, RV, light truck wheel studs.
- Use : First, use a ratchet or impact wrench to tighten the new stud into place. Then, place the tool on the stud shaft. Finally, tighten the nut tool to pull the stud into place. Vehicle studs are often too long and this installer tool will help.
- See more on Amazon...
Brand: Osilly | Manufacturer: Osilly
Dimensions: 0.30 x 0.50 x 0.30 inches
Warranty: 0.2
See On Amazon
Looking For Something Else?
Search