Mxfans HSS Adjustable Hand Reamer Milling Tool 19-21mm Diameter
Asin: B07DRCGCKZ | Model: M3171225217 | PartNumber: M3171225217
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Functions:The Reamer Are Used To Remove The Rotating Tool That Has Been Machined To The Thin Metal Layer Of The Surface. The Precise Size And Shape Can Be Obtained After The Hole Is Machined Through The Reamer..
Fit For A3 Steel, Alloy Steel, Cast Iron, Cast Steel, Aluminum And Other Metal Materials, Etc..
Features
- Made of HSS material, adjustable.
- Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc.
- Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer.
- See more on Amazon...
Brand: Mxfans | Manufacturer: blhlltd
Weight: 0.00 pounds
See On Amazon Similar To Mxfans HSS Adjustable Hand Reamer
#1
Performance Tool W2967 Tapered Reamer Set with T-Handle and Carbon Steel Contstruction to Align Holes or Remove Burrs from Pipe, Tubes, and More (2-Piece), Black
Asin: B073XVRG74 | Model: W2967 | PartNumber: W2967 | Ean: 0039564012730 | UPC: 039564012730
T-Handle Design For Easy Turning And Sure Handling.
Lifetime Warranty: Each Tool Is Tested Against Industry Standards For Hardness, Torque, Finish, And Usability And Should Last A Lifetime Under Normal Use.
Capacity: 1/8" To 1/2" (3 - 13Mm) And 5/32" To 7/8" (4 - 22Mm).
The Heat Treated #45 High Carbon Steel For Longer Service Life.
Features
- Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
- The heat treated #45 high carbon steel for longer service life
- T-handle design for easy turning and sure handling
- Capacity: 1/8 to 1/2 (3 - 13mm) and 5/32 to 7/8 (4 - 22mm)
- LIFETIME WARRANTY: Each tool is tested against industry standards for hardness, torque, finish, and usability and should last a lifetime under normal use
- See more on Amazon...
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 8.65 x 0.90 x 4.25 inches | Weight: 0.55 Pounds
Warranty: lifetime
See On Amazon #2
Eyech 2Pcs T Handle Taper Reamer Set,6 Fluted Chamfer Reaming Guitar Bridge Pin Hole Handle Tapered Reamers Woodworker Tool 1/8"-1/2" (3-13mm) & 3-16''-5/8'' (5-16mm)
Asin: B0CDPP3F8Y
Precision Enlargement: Our Tapered Reamers Are Meticulously Designed To Create Impeccably Precise And Smooth Holes, Ensuring A Professionally Accurate Finish For Your Projects..
Versatile Applications: Perfect For Crafting Tapered Holes In A Range Of Materials Like Metal, Wood, Plastic, And More. An Ideal Choice For Hobbyists, Diy Enthusiasts, And Professionals Alike..
Detachable Efficiency: The T-Type Handle, Detachable And Featuring A 1/4" Hex Shank, Effortlessly Aligns With Standard Power Tools. This Enhances Efficiency And Reduces Reaming Time..
Durable Construction: Crafted From High-Quality Materials, These Reamers Offer Excellent Longevity And Performance, Making Them A Reliable Addition To Your Tool Collection..
Features
- Package Contents: Includes 2 Bridge Pin Hole Reamers - Sizes: 1/8"-1/2" (3-13mm) and 1/5"-5/8" (5mm-16mm).
- Durable Construction: Crafted from high-quality materials, these reamers offer excellent longevity and performance, making them a reliable addition to your tool collection.
- Precision Enlargement: Our tapered reamers are meticulously designed to create impeccably precise and smooth holes, ensuring a professionally accurate finish for your projects.
- Detachable Efficiency: The T-type handle, detachable and featuring a 1/4 hex shank, effortlessly aligns with standard power tools. This enhances efficiency and reduces reaming time.
- Versatile Applications: Perfect for crafting tapered holes in a range of materials like metal, wood, plastic, and more. An ideal choice for hobbyists, DIY enthusiasts, and professionals alike.
- See more on Amazon...
Brand: Eyech | Manufacturer: Eyech
Dimensions: 0.59 x 6.30 x 3.35 inches
See On Amazon #3
uxcell 1/8" 3/16" 1/4" 5/16" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8M58TC | Model: a20103000ux0036 | PartNumber: a20103000ux0036
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 1/8", 3/16", 1/4", 5/16"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
Lichamp 4 Piece Reamers Set for Metal, Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers
Asin: B0B5HW8N41 | Model: TRS-A10400 | PartNumber: TRS-A10400
Wide Applications - Works Well In Free Cutting And Carbon Steels, As Well As Soft, Non-Ferrous Materials Such As Aluminum, Brass And Copper..
Safe Straight Shank - Round Shank With 3 Flats To Prevent Slipping In The Drill Chuck, Safety Flange/ Stop Collar To Prevent The Reamer Running Through The Hole..
Five Grooves Fast Drilling - Reversed Spiral Push Chips Forward And Are Ideal For Through-Hole Applications, Reduces The Friction, Runs Cooler, Performs Well In Heat, Corrosion And Rust Resistance..
M2 High Speed Steel - Hss M2 Ensures Sharp And Fast Execution In Most Hard Steel Material For Clean Results, While Provides Good Wear Resistance In Mild Steels And Non-Ferrous Materials..
Features
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles.
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials.
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper.
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance.
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 2.17 x 8.46 x 5.91 inches | Weight: 1.76 pounds
See On Amazon #5
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM48Q6T | Model: a20102800ux0556 | PartNumber: a20102800ux0556
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
Mriuuod Hand Reamer Tool, Tapered Reamer Set, 3-13mm(1/8''-1/2'') & 5-16mm( "-5/8") Bridge Pin Hole Handle Tapered Reamers 6 Fluted Chamfer Reaming Guitar Woodworker Luthier Tool
Asin: B0CDPVKZS1
Design: With Removable T-Handle, Easy Turning And Sure Handling. It Can Save You The Power To Reaming And Control. Comes In A Transparent Plastic Box, Easy To Carry.
Packing Includes :2 Pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13Mm) Size And 1/5" -5/8 "(5Mm -16Mm) Size, 1 Pieces 6Mm Hacksaw Drill, 1 Pieces Transparent Plastic Box.
Wildly Used: Handle Drilling Tool Is Suitable For Taper Holes On Top Of Planks, Chamfering, Easy Screw Sinking Holes. Also Suitable For Enlarge Bridge Pin Holes Or Other Holes In Guitar..
Function Well: Reamers For Metal Remove Burrs From Cut Pipe, Tubing, And Conduit, And Enlarge And Countersink Holes In Sheet Metal, Plastic, Copper, Softwoods And Other Materials..
Features
- Premium Material: Made of high quality carbon steel with precision cutting edges. sturdy and durable, rust and corrosion resistant, not easy to deform and break.
- Function Well: reamers for metal remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, copper, softwoods and other materials.
- Design: With removable T-handle, easy turning and sure handling. it can save you the power to reaming and control. Comes in a transparent plastic box, Easy to carry
- Wildly Used: Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes. Also suitable for enlarge bridge pin holes or other holes in guitar.
- Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8 -1/2 (3-13mm) size and 1/5 -5/8 (5mm -16mm) size, 1 pieces 6mm Hacksaw Drill, 1 pieces transparent plastic box
- See more on Amazon...
Brand: Mriuuod | Manufacturer: Mriuuod
See On Amazon #7
Adjustable Hand Reamers H12 To H16 Sizes 1-1/16inch To 2-7/32inch Set 26.98mm To 56.35mm
Asin: B0BTYD468M | Model: 5PCSH12TOH16 | PartNumber: 5PCSH12TOH16
Body Material : Mild Steel.
A Set Contain 5 Pcs Of Adjustable Hand Reamer As Described Here: H12 Adjustable From 1.1/16″ – 1.3/16″ (26.98Mm – 30.16Mm), H13 Adjustable From 1.3/16″ – 1.11/32″ (30.16Mm – 34.13Mm), H14 Adjustable From 1.11/32″ – 1.1/2″ (34.13Mm – 38.10Mm), H15 Adjustable From 1.1/2″ – 1.13/16″ (38.10Mm – 46.03Mm) And H16 Adjustable From 1.13/16″ – 2.7/32″ (46.03Mm – 56.35Mm).
Blades Made From Carbon Steel.
Each Reamer Can Expand From Smallest Size To Next Larger Size. The Disposable Blade Slide Along A Tapered Groove.
Features
- One Reamer does the work of many. The act of tightening and loosening the restraining nuts at each end and varies the size that maybe cut
- Each Reamer can expand from smallest size to next larger size. The disposable blade slide along a tapered groove
- Body Material : Mild Steel
- Blades made from Carbon Steel
- A set contain 5 pcs of Adjustable Hand Reamer as described here: H12 Adjustable from 1.1/16 1.3/16 (26.98mm 30.16mm), H13 Adjustable from 1.3/16 1.11/32 (30.16mm 34.13mm), H14 Adjustable from 1.11/32 1.1/2 (34.13mm 38.10mm), H15 Adjustable from 1.1/2 1.13/16 (38.10mm 46.03mm) and H16 Adjustable from 1.13/16 2.7/32 (46.03mm 56.35mm)
- See more on Amazon...
Brand: RAHISH TOOLS | Manufacturer: RAHISH TOOLS
See On Amazon #8
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
Asin: B08ZM5TN75 | Model: a20102800ux0553 | PartNumber: a20102800ux0553
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
Saipe 5/8" Spiral Flute Reamer with 1/2 inch Shank, M2 HSS Bridge/Construction Reamer Taper Chucking Reamer Drill Bit Car/Maintenance Reamer for Steel, Alloy, Aluminum, Copper, Plastic
Asin: B0BKFY973Q | Model: 5/8" Spiral Flute Reamer | PartNumber: 5/8" Spiral Flute Reamer
【3-Flat Design】Three Symmetrically Placed Flats On The Shank Provide Positive Grip In Portable Power And Air Tools. The Short Length Is Convenient For Use In Areas With Limited Access..
【Taper Chucking Reamer】The Reamer Is Widely Used In Bridge, Construction, Steel Erection / Fabrication, And Automotive (Truck & Trailer) Industries. Notice: It Requires An Existing Hole Or A Pilot Hole!.
【Widely Used】Bridge/Construction Reamers Are Used To Align Existing Holes Before Installing Bolts Or Rivets. Suitable For Use In A Wide Range Of Materials Such As Aluminum, Brass, Cast Iron, Copper, Iron, Metal, Plastic, Steel, Etc..
【Tapered Point & Spiral Flutes & Safety Stop】Tapered Design Allow Entry Into Overlapping Holes; Spiral Flutes Can Discharge The Chips Easily; Safety Collar Stop To Prevent Over Penetration And Operator Loss Of Stability..
Features
- Bridge Reamer The package contains a 5/8 inch reamer with 1/2 inch shank. Made of high quality M2 HSS 6542 for high hardness and durability.
- Tapered Point & Spiral Flutes & Safety Stop Tapered design allow entry into overlapping holes; Spiral Flutes can discharge the chips easily; Safety collar stop to prevent over penetration and operator loss of stability.
- 3-Flat Design Three symmetrically placed flats on the shank provide positive grip in portable power and air tools. The short length is convenient for use in areas with limited access.
- Widely Used Bridge/Construction reamers are used to align existing holes before installing bolts or rivets. Suitable for use in a wide range of materials such as Aluminum, Brass, Cast Iron, Copper, Iron, Metal, Plastic, Steel, etc.
- Taper Chucking Reamer The reamer is widely used in bridge, construction, steel erection / fabrication, and automotive (truck & trailer) industries. Notice: It requires an existing hole or a pilot hole!
- See more on Amazon...
Brand: Saipe | Manufacturer: Saipe
See On Amazon #11
LifCratms 1/8"-1/2" (3-13mm) T Handle Tapered Reamer, 6 Fluted Chamfer Reaming Tool, Guitar Bridge Pin Hole Handle Tapered Reamers Woodworker Luthier Tool
Asin: B0BXG6QZKB
【Easy To Use】The 6 Fluted Chamfer Reaming Tool Has A Removable T Handle, Provides A Leverage For Easier Reaming, Better Rotation And Greater Control. The Product With Precision Ground Cutting Edges, Can Help You Reaming With Little Effort..
【100% Risk-Free Shopping】If You Have Any Questions Or Problems During The Purchasing Or Not Satisfied With The Product, Please Feel Free To Contact Us Via Amazon Email, We Will Try Our Best To Give You A Satisfied Solution. Please Rest Assured To Order, We Wish You A Happy Shopping Experience..
【Function Well】The T Handle Tapered Reamer With A Capacity Of 1/8" To 1/2", Is A Useful Tool For Removing Burrs From Wood, Plastic, Cut Pipe, Tubing, Conduit, Wallboard, Etc. Also Suitable For Enlarge Bridge Pin Holes Or Other Holes In Guitar..
【Premium Material】The Bridge Pin Hole Hand Held Reamer Is Mad Of High Quality 45# Steel Which Is A Hardened And Tempered Tool Steel, Sturdy And Durable, Rust And Corrosion Resistant, Not Easy To Deform And Break..
Features
- What You Will Get 1 x T Handle Tapered Reamer, Diameter: 1/8"-1/2" (3mm-13mm), Taper: 1:10. The T shaped reamer has proper tapers holes, suitable for bridge pins or end pins. The handle is removable, convenient to storage.
- Premium Material The Bridge Pin Hole Hand Held Reamer is mad of high quality 45# Steel which is a hardened and tempered tool steel, sturdy and durable, rust and corrosion resistant, not easy to deform and break.
- Easy to Use The 6 Fluted Chamfer Reaming Tool has a removable T handle, provides a leverage for easier reaming, better rotation and greater control. The product with precision ground cutting edges, can help you reaming with little effort.
- Function Well The T Handle Tapered Reamer with a capacity of 1/8 to 1/2, is a useful tool for removing burrs from wood, plastic, cut pipe, tubing, conduit, wallboard, etc. Also suitable for enlarge bridge pin holes or other holes in guitar.
- 100% Risk-Free Shopping If you have any questions or problems during the purchasing or not satisfied with the product, please feel free to contact us via Amazon email, we will try our best to give you a satisfied solution. Please rest assured to order, we wish you a happy shopping experience.
- See more on Amazon...
Brand: LifCratms | Manufacturer: LifCratms
See On Amazon #12
uxcell 3/8" 5/8" 1/2" 3/4" Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool Reamer Set for Bore Machining 4pcs
Asin: B09C8L512Q | Model: a20103000ux0040 | PartNumber: a20103000ux0040
Wide Applications: Sharp Blade For Easy Cutting And High Efficiency. Used For Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, Alloy, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Used On Screw Machines, Turret Lathes, Drilling And Milling Machines. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of High-Speed Steel, The Reamers Have Combination Of Hardness And Toughness For Wear Resistance. The Cutter Body Is Sturdy And Damage-Resistant, With Strong Heat Resistance That Stable Processing. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: Cutting diameter: 3/8", 5/8", 1/2", 3/4"; accuracy class: H7. The hand reamers ream the cylindrical shape. Good for general purpose applications. Straight round shank provides a stable holding and can be used with a variety of tool holding systems.
- Material and Coating: Made of high-speed steel, the reamers have combination of hardness and toughness for wear resistance. The cutter body is sturdy and damage-resistant, with strong heat resistance that stable processing. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Sharp blade for easy cutting and high efficiency. Used for processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, alloy, and other soft materials.
- Easy to Use: Can be used on screw machines, turret lathes, drilling and milling machines. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #13
YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8"-1/2" (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools
Asin: B081W3WZ3W | Ean: 0615200910938 | UPC: 615200910938
Reamer T Handle For Easy Reaming.The Removable Handle Facilitates Compact Storage..
Packing Includes :2 Pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13Mm) Size And 1/5" -5/8 "(5Mm -16Mm) Size.
Material Of Taper Reamers: High Carbon Steel Heat Treatment, Longer Service Life.
The T Reamers Are Precisely Machined Cutting Edges Smooth The Surface Of The Metal Without Effort.
Features
- The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels
- The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort
- Reamer T handle for easy reaming.The removable handle facilitates compact storage.
- Material of Taper Reamers: high carbon steel heat treatment, longer service life
- Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8 -1/2 (3-13mm) size and 1/5 -5/8 (5mm -16mm) size
- See more on Amazon...
Brand: YaeKoo | Manufacturer: Yaemart Corportation
See On Amazon #14
uxcell 3/8" Hand Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool
Asin: B091KCHWYD | Model: a20103000ux0056 | PartNumber: a20103000ux0056
Wide Applications: Used For Processing, Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3/8"; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
Alnicov Tapered Reamer Wood Hand Held Reamer T Handle Tapered 4 Fluted Chamfer Reaming Guitar Woodworker Cutting Tool
Asin: B0836DG264 | Ean: 0696550903719 | UPC: 696550903719
Increased Leverage: T-Handle Provides Leverage For Easier Reaming With Greater Control And Easier Turning.
Durable: The Reamer Is Made Of Hardened And Tempered Steel With Precision Ground Cutting Edges. The Wood Handle Is Stable And Suitable For Handing It. It Will Be Easiler When You Using It..
Capacity: 1/8" To 1/2" (3 - 13Mm).
Luthier/Guitar Tool: Enlarges Bridge Pin Holes, Headstocks, Holes For Tuners And Volume/Tone Knobs.
Features
- ENLARGES HOLES: Help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
- LUTHIER/GUITAR TOOL: enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs
- INCREASED LEVERAGE: T-handle provides leverage for easier reaming with greater control and easier turning
- CAPACITY: 1/8 to 1/2 (3 - 13mm)
- DURABLE: The reamer is made of hardened and tempered steel with precision ground cutting edges. The wood handle is stable and suitable for handing it. It will be easiler when you using it.
- See more on Amazon...
Brand: Alnicov | Manufacturer: Alnicov
See On Amazon #16
uxcell Hand Reamer 3/8" High Speed Steel H7 6 Straight Flutes Hand Milling Cutter Tool Reaming Drill Bit for Metal
Asin: B07JPF68ZQ | Model: a18091400ux0326 | PartNumber: a18091400ux0326
Hand Reamer: The Reamer Drill Bit Can Be Hand Operated By Use Of A Wrench, T-Handle Wrench, Extension Rod, Drill Chuck. Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Wide Applications: The Reamer Is Designed To Accurately Enlarge, Smooth Or Finish Holes In Stainless Steel, Cast Iron, Aluminum, Non-Ferrous Metals, Plastic, And Wood, Widely Used In Hole Repair Work, Pipe And Fittings, Woodworking Applications..
Features
- High-speed Steel Reamers: Accuracy: H7; Cutting Diameter: 3/8"; Tool Flute Length: 59.5mm / 2.34"; Shank Length: 44mm / 1.73"; Overall Length: 114.7mm / 4.52". Provides durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The reamer is designed to accurately enlarge, smooth or finish holes in stainless steel, cast iron, aluminum, non-ferrous metals, plastic, and wood, widely used in hole repair work, pipe and fittings, woodworking applications.
- Hand Reamer: The reamer drill bit can be hand operated by use of a wrench, T-handle wrench, extension rod, drill chuck. Used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 4.72 x 0.39 inches
See On Amazon #17
Mriuuod Chucking Reamer Set, 1/8" 3/16" 1/4" 5/16" Reamer, H7 Straight Flutes Lathe Machine Reamer, High Speed Steel Round Shank Milling Cutting Tool Reamer for Bore Machining 4pcs
Asin: B0CDPVFFKG
Brand: Mriuuod | Manufacturer: Mriuuod
See On Amazon #18
AOWISH T Handle Taper Reamer Set 3-13mm(1/8''-1/2'') & 5-16mm( "-5/8") Bridge Pin Hole Hand Held Tapered Reamers 6 Fluted Chamfer Reaming Guitar Woodworker Luthier Tool (2 Pieces)
Asin: B07D35C3LY | Ean: 0712195627695 | UPC: 712195627695
✔ Useful And Safer Diy Kit For Your Guitar, Ukulele, Bass, Toy Model Or Rc Airplanes..
✔ 2 Different Capacities Taper Reamers 3-13 Mm(Approx 7.5 Degree) And 5-15 Mm(Approx 3 Degree) In The Package..
✔ T Shape Handle Provides Leverage For Easier Reaming. Removable Handle Provides Convenience For Compact Storage..
✔ Recommended To Use For Sheet Metal, Plastic, Copper And Softwoods For Sure..
Features
- Made of hardened and tempered tool steel 45#. STURDY and DURABLE.
- Recommended to use for sheet metal, plastic, copper and softwoods for sure.
- Useful and safer DIY kit for your guitar, ukulele, bass, toy model or RC airplanes.
- T shape handle provides leverage for easier reaming. Removable handle provides convenience for compact storage.
- 2 Different capacities taper reamers 3-13 mm(approx 7.5 degree) and 5-15 mm(approx 3 degree) in the package.
- See more on Amazon...
Brand: AOWISH | Manufacturer: AOWISH
Weight: 0.44 pounds
See On Amazon #19
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 8pcs
Asin: B08ZM5NTWB | Model: a20102800ux0551 | PartNumber: a20102800ux0551
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
Accusize Industrial Tools H.S.S. Aligning Reamer - 13/16'' Diameter, 5'' Flute Length, 7'' OAL, Hex Shank, Spiral Flute, 0523-6035
Asin: B07D3ZX6WG | Model: 0523-6035 | PartNumber: 0523-6035 | Ean: 0663566021607, 0637665775839 | UPC: 637665775839, 663566021607
High-Speed Steel Construction: Offers Durability And Resistance To Wear For General-Purpose Reaming..
Robust H.S.S. Construction: Made From High-Speed Steel For Extended Durability And Resistance To Wear In Rigorous Applications..
Precision Sizing: Offers A 13/16" Diameter And A 5" Flute Length, With A Total Length Of 7", Perfect For Precise Reaming Operations..
Compatible Hex Shank: The 1-1/4" Hex Shank Size Ensures Seamless Use With Portable Pneumatic Tools, Enhancing Tool Versatility..
Key Specifications: Reamer Diameter: 13/16'', Flute Length: 5'', Overall Length: 7'', Hex Shank Size: 1-1/4"..
Efficient Design: Features A Hex Shank And Spiral Flute For Optimal Stability And Effective Chip Removal In Aligning Tasks..
Precise Sizing: Reamer Shank Perfectly Matches Socket Size For Bolts, Ensuring Accurate Alignment..
Compact For Accessibility: Designed To Operate In Restricted Access Areas, Ideal For Tasks Requiring Maneuverability..
Spiral Flute Efficiency: Ensures Smooth Finishes And Efficient Chip Clearance, Particularly In Keyway Or Interrupted Cuts..
Features
- Hex Shank Design: Ideal for use with portable pneumatic tools in areas with limited space.
- Spiral Flute Efficiency: Ensures smooth finishes and efficient chip clearance, particularly in keyway or interrupted cuts.
- High-Speed Steel Construction: Offers durability and resistance to wear for general-purpose reaming.
- Precise Sizing: Reamer shank perfectly matches socket size for bolts, ensuring accurate alignment.
- Key Specifications: Reamer Diameter: 13/16'', Flute Length: 5'', Overall Length: 7'', Hex Shank Size: 1-1/4.
- Efficient Design: Features a hex shank and spiral flute for optimal stability and effective chip removal in aligning tasks.
- Precision Sizing: Offers a 13/16 diameter and a 5 flute length, with a total length of 7, perfect for precise reaming operations.
- Compatible Hex Shank: The 1-1/4 hex shank size ensures seamless use with portable pneumatic tools, enhancing tool versatility.
- Compact for Accessibility: Designed to operate in restricted access areas, ideal for tasks requiring maneuverability.
- Robust H.S.S. Construction: Made from High-Speed Steel for extended durability and resistance to wear in rigorous applications.
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 1.57 x 7.28 x 1.57 inches | Weight: 0.88 pounds
See On Amazon
Looking For Something Else?
Search