OTC Tools 6644 Door Handle Spring Retainer
Asin: B07F7QMGZ5 | Model: 6644 | PartNumber: 6644 | Ean: 0731413589652 | UPC: 731413589652
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Tool Allows For Door Handle Replacement Without Having To Remove The Interior Door Panel.
The Tool Installs Into The Door Handle Cavity And Under The Handle Return Spring To Prevent It From Unloading.
Features
- Similar to BO-51363
- The tool installs into the door handle cavity and under the handle return spring to prevent it from unloading
- This tool allows for door handle replacement without having to remove the interior door panel
- See more on Amazon...
First Available: 07/03/2018
Brand: OTC | Manufacturer: OTC Tools
Weight: 0.10 Pounds
See On Amazon Similar To OTC Tools 6644 Door Handle
#1
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 inches | Weight: 0.70 pounds
Warranty: LIFETIME
See On Amazon #2
OTC 6676 Heavy-Duty Windshield Wiper Arm Puller
Asin: B004CGRQGE | Model: 6676 | PartNumber: 6676 | Ean: 0731413504686 | UPC: 731413504686
Live Center And More Precise Alignment Saves Labor.
Investment Cast Design Is Strong Easier To Use And Saves Time.
Features
- Designed to remove aluminum wiper arm from the steel stud that often galvanizes locking the arm and stud together
- Investment cast design is strong easier to use and saves time
- Live center and more precise alignment saves labor
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.70 x 4.00 x 2.50 inches | Weight: 0.70 pounds
Warranty: Limited lifetime warranty
See On Amazon #3
OTC 6667 Harmonic Damper Puller
Asin: B000P6UT2I | Model: 6667 | PartNumber: 6667 | Ean: 0731413545085 | UPC: 731413545085
Country Of Manufacturer: Taiwan.
Package Dimensions: 8.9" L X 6.2" W X 2.2" H.
Manufacturer: Otc.
Features
- Hand Tools
- Manufacturer: Otc
- Country of Manufacturer: Taiwan
- Package Dimensions: 8.9 L x 6.2 W x 2.2 H
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 6.00 x 8.75 x 2.20 Inches | Weight: 0.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #4
OTC 7393 Gear and Pulley Puller with 5-1/2" Long Forcing Screw
Asin: B000P6UNW4 | Model: 7393 | PartNumber: 7393 | Ean: 0971473168460, 0731413001406 | UPC: 971473168460, 731413001406
Puller Block Is 4-7/8 Inches Wide.
High-Grade Materials Ensure Quality Performance Over The Lifetime Of The Tool.
5-1/2 Inch Long Center Screw; Includes 2 Ea. 3/8-16 X 3 Inch Long Hex Head Cap Screws.
Puller Features A Spread Of 1-1/2 Inches To 4-1/4 Inches.
Features
- OTC's 7393 Gear and Pulley Puller is perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes
- Puller features a spread of 1-1/2 inches to 4-1/4 inches
- Puller block is 4-7/8 inches wide
- 5-1/2 inch long center screw; includes 2 ea. 3/8-16 x 3 inch long hex head cap screws
- High-grade materials ensure quality performance over the lifetime of the tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 7.60 x 2.70 x 1.70 inches | Weight: 1.60 pounds
Warranty: Limited lifetime warranty
See On Amazon #5
OTC 6695 Axle Shaft Seal Installer for Ford 1998-2004 F-250/350/450/550
Asin: B0015PKC5W | Model: 6695 | PartNumber: 6695 | Ean: 0731413543753 | UPC: 731413543753
Prevents Front Hub Vacuum Leaks That Would Cause The 4Wd To Not Engage.
Correctly Installs The Seal Onto The Axle Shaft And Into The Wheel Knuckle.
Features
- Works on 1998-2004 Ford F-250 F-350 F-450 and F-550 4X4s having the vacuum-operated front axle
- Correctly installs the seal onto the axle shaft and into the wheel knuckle
- Prevents front hub vacuum leaks that would cause the 4WD to not engage
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 7.80 x 11.35 x 8.60 inches | Weight: 0.01 pounds
Warranty: Limited lifetime warranty
See On Amazon #6
OTC 4461 6-Piece Automotive Terminal Release Tool Set with Case
Asin: B008PV8F30 | Model: 4461 | PartNumber: 4461 | Ean: 0731413563607, 6081602530663, 7258007103863, 0706949176997, 8852274114028 | UPC: 706949176997, 731413563607
No. 7737 Computer Edge Board And Header Release Tool - Doubled Ended For Different Applications; No. 7738 Weather Pack Sensor Terminal Release Tool; No. 7740 Micro-Style Terminal Release Tool.
All Tools Fit Various Import And Domestic Cars, Trucks, And Suvs; Rugged Blow-Molded Plastic Storage Case Keeps Tools Contained And Organized So They Are Ready When You Are.
Included Components: Product & Instructions Guide.
No. 7741 Computer Terminal Release Tool For I.D. Computer Terminals; No. 7742 Universal Harness Release Tool; No. 7743 Terminal Release Tool - Releases Terminals On Most Body Wiring Connectors.
Services Most Oe Terminal Connectors - Simply Insert The Appropriate Release Tool To Depress The Locking Tab And The Individual Wire Slides Out For Service Or Replacement.
Features
- save time and money by repairing or rebuilding a wiring harness instead of having to order an entire oe replacement
- services most oe terminal connectors - simply insert the appropriate release tool to depress the locking tab and the individual wire slides out for service or replacement
- no. 7737 computer edge board and header release tool - doubled ended for different applications; no. 7738 weather pack sensor terminal release tool; no. 7740 micro-style terminal release tool
- no. 7741 computer terminal release tool for i.d. computer terminals; no. 7742 universal harness release tool; no. 7743 terminal release tool - releases terminals on most body wiring connectors
- all tools fit various import and domestic cars, trucks, and suvs; rugged blow-molded plastic storage case keeps tools contained and organized so they are ready when you are
- Included components: Product & Instructions Guide
- See more on Amazon...
First Available: 12/21/2012
Brand: OTC | Manufacturer: OTC
Dimensions: 1.25 x 7.00 x 5.00 inches | Weight: 0.00 Pounds
Warranty: One Year Limited Warranty
See On Amazon #7
OTC Tools 5080A Leaf Spring Pin and Bushing Service Set (Truck Front)
Asin: B01MTKVGS4 | Model: 5080A | PartNumber: 5080A | Ean: 0731413585852 | UPC: 731413585852
Handles All Popular Oe And Aftermarket Components Including Horton Pin And Bushing Assemblies.
All Accessories Are Included Except The Hydraulic Hand Pump Which Must Be Purchased Separately.
Service Bushing Assemblies In Many Cases Without Removing Leaf Spring Hangers And Spring Assemblies From The Vehicle.
Services Bushings With Diameters From 1-1/4 Inch Through 1-7/8 Inch And Pin Diameters From 7/8 Inch Through 1-1/8 Inch.
Features
- Delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily
- Services bushings with diameters from 1-1/4 inch through 1-7/8 inch and pin diameters from 7/8 inch through 1-1/8 inch
- Handles all popular OE and aftermarket components including Horton pin and bushing assemblies
- Service bushing assemblies in many cases without removing leaf spring hangers and spring assemblies from the vehicle
- All accessories are included except the hydraulic hand pump which must be purchased separately
- See more on Amazon...
First Available: 11/09/2016
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 5.20 x 18.90 x 18.20 Inches | Weight: 21.00 Pounds
See On Amazon #8
OTC 1038 7-Ton 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical)
Asin: B00063WVUI | Model: 1038 | PartNumber: 1038 | Ean: 0705554411035, 0731413010385 | UPC: 705554411035, 731413010385
Maximum Reach - 8-3/4 Inches; Maximum Spread - 11 Inches.
Center Screw Size - 11/16-18 X 9 Inches Long.
Jaw Thickness - 11/32 Inch; Jaw Width - 1 Inch.
Forged From Quality Steel, Heat Treated, And Subjected To Rigorous Tests Which Exceed The Rated Capacity.
Features
- OTC's 7-ton capacity, long 2/3-jaw, gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 8-3/4 inches; maximum spread - 11 inches
- Jaw thickness - 11/32 inch; jaw width - 1 inch
- Center screw size - 11/16-18 x 9 inches long
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 1.90 x 13.30 x 5.50 inches | Weight: 0.30 Pounds
Warranty: Lifetime warranty does not cover abuse
See On Amazon #9
OTC (1180) 10-Ton Capacity Push Puller Set
Asin: B000FN4CSS | Model: 1180 | PartNumber: 1180 | Ean: 0731413023033 | UPC: 731413023033
Set Consists Of A No. 927 10-Ton Push-Puller With 6-3/4 Inch Puller Legs, An 8-3/8 Inch Reach And A 2-1/8 To 7-1/4 Inch Spread.
No. 7393 Gear And Pulley Puller Includes 5-1/2 Inch Long And 13 Inch Long Forcing Screws And Two 3/8-16 X 3 Inch Long Hex Head Cap Screws; Spread Range Is 1-1/2 To 4-1/4 Inches.
No. 522 Gear And Pulley Puller Has A Spread Range Of 2 Inches To 7-3/4 Inches When Used With 1/2 Inch Cap Screws (Cap Screws Not Included).
Ideal For Servicing Heavy-Duty Trucks, Off-Road Construction Equipment, And Machinery.
Features
- 3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case; permits damage-free pulling of gears, bearings, harmonic balancers, and other parts with tapped holes
- Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery
- Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread
- No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included)
- No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws; spread range is 1-1/2 to 4-1/4 inches
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 2.00 x 10.00 x 6.00 inches | Weight: 18.10 pounds
Warranty: Limited lifetime warranty
See On Amazon #10
OTC 464 2-Ton 'GripLock' External and Internal Puller
Asin: B004CGUAHG | Model: 464 | PartNumber: 464 | Ean: 0731413545689, 0031113148525 | UPC: 731413545689, 031113148525
Configurable As A 2 Or 3 Jaw Puller To Suit Your Needs.
Live Center' Action Forcing Screw.
Both External And Internal Pulling Action.
Pressure Bearing Yoke Cap Holds Jaws In Place For Ease Of Set Up - In Any Orientation.
Features
- OTC's 2-Ton 'GripLock' Puller features a 4 inch maximum reach and a 3-4 inch spread
- Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation
- Configurable as a 2 or 3 jaw puller to suit your needs
- Both external and internal pulling action
- Live Center' action forcing screw
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 3.75 x 9.25 x 4.00 inches | Weight: 3.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #11
OTC 4534 Multi Purpose Bearing and Pulley Puller Set
Asin: B00061SM9E | Model: 4534 | PartNumber: 4534 | Ean: 0731413040276 | UPC: 731413040276
Set Components Deliver A Spread Of 3 Inches To 5 Inches And A Reach Of 1 Inch To 2-1/4 Inches.
Durable Blow-Molded Plastic Storage Case That Keeps Set Components Contained And Organized So They Are Ready For Use When Needed.
Kit Includes 2 Ea. Forcing Screws (Live Center), 2 Ea. Cross-Bar Yokes, 2 Ea. Clamp Bolts, 3 Pairs Of Puller Jaws, 1 Pair Of Jaw Pins With Ball Spring, And 3 Pairs Of Capped Bolts.
Drop-Forged Components Can Be Used In A Variety Of Combinations.
Features
- For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
- Drop-forged components can be used in a variety of combinations
- Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
- Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
- Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 10.80 x 13.60 x 3.00 inches | Weight: 9.20 pounds
See On Amazon #12
OTC 4676 Windshield Wiper Puller
Asin: B000L7JQE8 | Model: 4676 | PartNumber: 4676 | Ean: 0777780969734, 7262318383371, 4684505047966, 0787461459331, 0731413045639 | UPC: 731413045639, 777780969734, 787461459331
Simply Place Puller Feet Under Wiper Arm And Tighten Forcing Screw Against Wiper Shaft To Remove The Wiper Arm.
Features A Rugged Metal Frame And Forcing Screw With Rounded Tip To Engage Small Depression On Windshield Washer Shaft Or Loosened Nut - Keeping The Screw Centered On The Shaft For Optimum Performance.
Tool Features A Throat Depth Of 1-1/16 Inches; Foot Spacing Accomodates Wiper Shafts Up To Approximately 5/8 Inch Diameter.
Engineered To Ensure No Damage Will Occur To Wiper Arm Hood Or Cowling During Wiper Arm Removal.
Features
- Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks
- Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal
- Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm
- Tool features a throat depth of 1-1/16 inches; foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter
- Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.20 x 3.60 x 6.30 inches | Weight: 0.00 pounds
Warranty: One year limited warranty
See On Amazon #13
OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks
Asin: B00UF4L9BU | Model: 5190A | PartNumber: 5190A | Ean: 0731413577536 | UPC: 731413577536
Smooth, Crisp Threads Allows For A Lower, More Consistent Effort To Rotate Shaft; Will Not Damage The Driveshaft, Yoke, Bearing Cups, Or Joints.
Fits Spicer Driveline 1610, 1710, 1760, 1810, 1880; Spicer Spl 140, 170, And 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor Rpl 20 And 25 'Permalube' Series.
Major Tool Components Are Heat Treated For Improved Strength And Durability, Ensuring A Long, Productive Service Life.
Large Diameter Threaded Shaft Can Handle U-Joints That Are Severly Seized Due To Corrosion And Require More Force To Disassemble.
Features
- Ideal tool for removing Heavy-Duty driveline U-Joints on Class 7 and 8 Trucks in conjunction with up to a 1 inch impact wrench (not included) - without the need for heat or hammering
- Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble
- Smooth, crisp threads allows for a lower, more consistent effort to rotate shaft; will not damage the driveshaft, yoke, bearing cups, or joints
- Major tool components are heat treated for improved strength and durability, ensuring a long, productive service life
- Fits Spicer driveline 1610, 1710, 1760, 1810, 1880; Spicer SPL 140, 170, and 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor RPL 20 and 25 'Permalube' series
- See more on Amazon...
First Available: 06/06/2015
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 5.00 x 12.00 x 9.00 inches | Weight: 11.40 Pounds
Warranty: 1 year manufacturer
See On Amazon #14
OTC (7832) GM Torsion Bar Unloader
Asin: B00EVPMYW2 | Model: 7832 | PartNumber: 7832 | Ean: 0731413574627 | UPC: 731413574627
Application: 2011 And Newer Hd C/K Trucks.
Torsion Bar Unloader Can Be Positioned On The Frame And The Torsion Bar Mount.
Larger Design To Cover The Newer Gm Truck Applications.
Application: 2011 And Newer Hd C/K Trucks.
Torsion Bar Unloader Can Be Positioned On The Frame And The Torsion Bar Mount.
This Tool Is Required To Safely Release The Tension On The Front Suspension Torsion Bar To Service The Front Suspension.
When Servicing The Lower Control Arm Of The Front Suspension On Gm Trucks Or Replacing A Torsion Bar It Is Necessary To Remove The Spring Pressure From The Suspension.
When Servicing The Lower Control Arm Of The Front Suspension On Gm Trucks Or Replacing A Torsion Bar It Is Necessary To Remove The Spring Pressure From The Suspension.
Larger Design To Cover The Newer Gm Truck Applications.
Features
- This tool is required to safely release the tension on the front suspension torsion bar to service the front suspension
- Larger design to cover the newer GM Truck applications
- Application: 2011 and newer HD C/K Trucks
- When servicing the lower control arm of the front suspension on GM trucks or replacing a torsion bar it is necessary to remove the spring pressure from the suspension
- Torsion bar unloader can be positioned on the frame and the torsion bar mount
- This tool is required to safely release the tension on the front suspension torsion bar to service the front suspension
- Larger design to cover the newer GM Truck applications
- Application: 2011 and newer HD C/K Trucks
- When servicing the lower control arm of the front suspension on GM trucks or replacing a torsion bar it is necessary to remove the spring pressure from the suspension
- Torsion bar unloader can be positioned on the frame and the torsion bar mount
- See more on Amazon...
First Available: 08/30/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.10 x 9.50 x 6.30 inches | Weight: 4.50 pounds
Warranty: Limited Lifetime Warranty
See On Amazon #15
OTC 7072A Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-1/2" OD, 1" Pilot
Asin: B000X1K4OI | Model: 7072A | PartNumber: 7072A | Ean: 0731413004476 | UPC: 731413004476
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-1/2 Inch O.D. Shaft, 1 Inch Pilot, 10 Splines, Splines Are 3.25 Inches Long; Similar To Ford 308-D001 (D79t-7550-A).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-1/2 inch O.D. shaft, 1 inch pilot, 10 splines, splines are 3.25 inches long; similar to Ford 308-D001 (D79T-7550-A)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.50 x 18.60 x 4.40 Inches | Weight: 0.25 pounds
Warranty: Limited lifetime warranty
See On Amazon #16
OTC 5085-S Hub Seal Puller Set with 28" Long Handle and 2 Pulling Heads
Asin: B0C7HLR3V6 | Model: 5085-S | PartNumber: 5085-S | Ean: 0731413598357 | UPC: 731413598357
Heads Are Manufactured With The Highest Quality Heat-Treated Steel For High Strength And A Long Service Life.
Removes Hub Seals On Trailer And Truck Axles, Including Truck Steering Axles.
Set Includes 28" Long Handle And Two Heads: 4.6 Inch Long Head For Seals Up To 4-1/2 Inch I.D., 5.1 Inch Long Head For Seals 4-5/8 Inch I.D. And Larger.
Extra Long 28 Inch Handle Provides Superior Leverage Allowing The Unique Pulling Head Design To Quickly And Easily Remove The Seal In One Piece.
Features
- OTC's 5085-S Hub Seal Puller Set eliminates bearing and hub damage that can occur when a punch and hammer is used to remove the seal
- Extra long 28 inch handle provides superior leverage allowing the unique pulling head design to quickly and easily remove the seal in one piece
- Heads are manufactured with the highest quality heat-treated steel for high strength and a long service life
- Set includes 28 long handle and two heads: 4.6 inch long head for seals up to 4-1/2 inch I.D., 5.1 inch long head for seals 4-5/8 inch I.D. and larger
- Removes hub seals on trailer and truck axles, including truck steering axles
- See more on Amazon...
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 7.00 x 34.00 x 7.00 inches
Warranty: Per Contract with Amazon
See On Amazon #17
OTC 7687A Mini Pry Wrench
Asin: B004CGSG1S | Model: 7687A | PartNumber: 7687A | Ean: 0069060344899, 0731413543968 | UPC: 069060344899, 731413543968
Item Package Dimension: 7.28L X 4.92W X 0.62H Inches.
Item Package Quantity - 1.
Product Type - Wrench.
Item Package Weight - 0.32 Pounds.
Gives You The Versatility Of A Pry Bar Without The Storage Problems.
Features
- Turns any 3/8" drive ratchet or breaker bar into a rolling head pry bar
- Gives you the versatility of a pry bar without the storage problems
- Item Package Dimension: 7.28L x 4.92W x 0.62H inches
- Item Package Weight - 0.32 Pounds
- Item Package Quantity - 1
- Product Type - WRENCH
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 0.80 x 6.60 x 4.60 inches | Weight: 0.10 pounds
Warranty: Limited lifetime warranty
See On Amazon #18
OTC (7822A) GM torsion Bar Unloading tool
Asin: B0002SRGYI | Model: 7822A | PartNumber: 7822A | Ean: 0731413027857 | UPC: 731413027857
Tool Holds The Torsion Bar While You Make Adjustments.
Also Works On 1988 To 2003 Gmc And Chevrolet 1/2 3/4 And 1-Ton Pickups The S-10 Blazer And S-15 Jimmy 4Wd Pickups With 4.3L V-6 Engines And 1991 To 2001 Oldsmobile Bravada.
Features A Larger C-Frame Opening To Accommodate Beefier Torsion Bars.
Features
- This rugged tool is built for GM's K-3500 series trucks with heavy-duty chassis and a larger torsion bar
- Features a larger C-frame opening to accommodate beefier torsion bars
- Tool holds the torsion bar while you make adjustments
- Also works on 1988 to 2003 GMC and Chevrolet 1/2 3/4 and 1-ton pickups the S-10 Blazer and S-15 Jimmy 4WD pickups with 4.3L V-6 engines and 1991 to 2001 Oldsmobile Bravada
- See more on Amazon...
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 6.10 x 10.40 x 8.20 inches | Weight: 4.50 pounds
Warranty: 1 year manufacturer
See On Amazon #19
OTC 7826 Torsion Bar Tool for Ford Truck
Asin: B000RMGMPS | Model: 7826 | PartNumber: 7826 | Ean: 0731413024252 | UPC: 731413024252
The Tool Fits 1997-2003 Ford F-150 4Wd Pickups 1995-2001 Ford Explorer 4Wd 1998-2001 Mercury Mountaineer And 1998-2001 Ford Ranger.
Without It A Torsion Bar Could Unwind And Possibly Cause Damage.
Features
- This tool firmly holds the torsion bar on Ford light-duty trucks while you adjust or service the front suspension
- Without it a torsion bar could unwind and possibly cause damage
- The tool fits 1997-2003 Ford F-150 4WD pickups 1995-2001 Ford Explorer 4WD 1998-2001 Mercury Mountaineer and 1998-2001 Ford Ranger
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 1.80 x 9.30 x 6.20 inches | Weight: 0.95 pounds
Warranty: Limited Lifetime Warranty
See On Amazon
Looking For Something Else?
Search