Taidacent Non Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Pipe Water Float Switch NPN Output Capacitive
Asin: B07FC79MLW | Model: Y26-NPN | PartNumber: Y26-NPN | Ean: 0702004746211 | UPC: 702004746211
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Npn Output: If There Is Induction, The Output Is Low Level; No Induction, Disconnected.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- NPN output: If there is induction, the output is low level; no induction, disconnected
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon Similar To Taidacent Non Contact Liquid Level
#1
Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output
Asin: B07FC5RGC7 | Model: Y25-V | PartNumber: Y25-V | Ean: 0702004746242 | UPC: 702004746242
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #2
Taidacent Non-Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Liquid Induction Level Switch Water Level Switch (NPN Output(24V))
Asin: B07QG5C6KK | Model: Y25-1904 | PartNumber: Y25-1904
High Stability, High Sensitivity, Strong Interference Capability, Free From External Electromagnetic Interference, Special Treatment For Power Frequency Interference And Common Mode Interference, To Be Compatible With All 5~24V Power Adapters On The Market..
Open Collector Output Mode, Wide Voltage Range (5~24V), Suitable For Connecting Various Circuits And Product Applications..
Strong Compatibility, Through A Variety Of Non-Metallic Containers, Such As Plastic, Glass, Ceramics And Other Containers, The Sensing Distance Can Reach 20Mm; Liquid, Powder, Particles Can Be Detected..
The Liquid Level Sensor Has Intelligent Liquid Level Reference Adjustment And Liquid Level Memory Function, Liquid Level Status Display Mode, Which Can Realize Multi-Point Series Connection; Can Support High And Low Level Output, Npn, Pnp Signal Output And Rs485 Communication Interface Output ;Open Collector Output Mode, Wide Voltage Range (5~24V), Suitable For Connecting Various Circuits And Product Applications(Please Choose The Appropriate Model For Your Usage)..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor has intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, which can realize multi-point series connection; can support high and low level output, NPN, PNP signal output and RS485 communication interface output ;Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications(Please Choose the appropriate model for your usage).
- High stability, high sensitivity, strong interference capability, free from external electromagnetic interference, special treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power adapters on the market.
- Strong compatibility, through a variety of non-metallic containers, such as plastic, glass, ceramics and other containers, the sensing distance can reach 20mm; liquid, powder, particles can be detected.
- Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida Century Technology
See On Amazon #3
Taidacent Automatic Water Level Controller Automatic Water Pump Controller Either to Fill or Empty a Tank 2 Non Contact Pipeline Water Level Sensor 1 Meter Cable
Asin: B082YY8727 | Ean: 0734831004158 | UPC: 734831004158
Manual Automatic Switching: The Controller Enters The Automatic Working Mode By Default When It Is Turned On. Press The K1 Key To Switch The Working Mode. The Red Light Is On For The Automatic Mode, And The Red Light Is Off For The Manual Mode..
Non-Contact Inductive Probe: It Adopts Non-Contact Capacitive Sensing Technology And Special Inductive Control Chip Design. The Probe Is Durable, Strong Anti-Interference Ability, Sensitive Inductive, Non-Contact With Liquid, Anti-Corrosion, Safe And Environmental Protection Without Pollution..
Pumping Overtime Protection: Continuous Automatic Pumping For More Than 5 Hours, Automatically Stop The Pump. The Work Indicator Flashes Quickly, You Can Press The K2 Key To Stop, Or Automatically Resume Standby By Delay..
Features
- Automatic water level control: the water level is lower than the low-level induction probe, the water pump is automatically started, the water level rises to a high level, and the water pump is automatically turned off.
- Pumping overtime protection: continuous automatic pumping for more than 5 hours, automatically stop the pump. The work indicator flashes quickly, you can press the K2 key to stop, or automatically resume standby by delay.
- Manual automatic switching: The controller enters the automatic working mode by default when it is turned on. Press the K1 key to switch the working mode. The red light is on for the automatic mode, and the red light is off for the manual mode.
- Non-contact inductive probe: It adopts non-contact capacitive sensing technology and special inductive control chip design. The probe is durable, strong anti-interference ability, sensitive inductive, non-contact with liquid, anti-corrosion, safe and environmental protection without pollution.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon #4
Taidacent Automatic Water Level Controller Water Pump Controller Water Tank Automatic Filling System Either to Fill or Empty a Tank Two Non Contact Water Tank Water Level Sensors 1 Meter Cable
Asin: B07RD7Y39P | Model: TD-DJL-2Y | PartNumber: TD-DJL-2Y
Relay Dry Contact Output, Can Be Applied To A Variety Of Load..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
Control Diversification, Can Control The Pump In Manual Or Automatic Mode..
Ac95 ~ 265V Wide Voltage Power Supply..
Features
- When the liquid level of the container is too low, the low liquid level alarm signal from the low liquid level sensor is triggered to trigger the controller to close the relay to start the water pump to add liquid level. When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the controller to disconnect the relay to automatically stop the water pump. You can use the controller to either to fill or empty a tank
- AC95 ~ 265V wide voltage power supply.
- Relay dry contact output, can be applied to a variety of load.
- Control diversification, can control the pump in manual or automatic mode.
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida Century Technology
Dimensions: 0.00 x 4.53 x 0.00 Inches
See On Amazon #5
Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output
Asin: B07FC8K28F | Model: Y26-V | PartNumber: Y26-V | Ean: 0702004746235 | UPC: 702004746235
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #6
Gravity: Non-Contact Digital Water/Liquid Level Sensor
Asin: B08JPNY5KJ | Model: SEN0204 | PartNumber: SEN0204 | Ean: 6959420910229
There Are No Special Requirements For The Liquid Or Container And This Liquid Sensor Is Easy To Use And Easy To Install..
The Liquid Level Sensor Is Equipped With An Interface Adapter That Makes It Compatible With Dfrobot "Gravity" Interface. Four Levels Of Sensitivity Can Be Configured By Pressing The Set Button..
No Contact With Liquid Makes The Module Suitable For Hazardous Applications Such As Detecting Toxic Substances, Strong Acid, Strong Alkali, And All Kinds Of Liquid In An Airtight Container Under High Pressure..
Features
- This is a non-contact water / liquid level sensor. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.
- No contact with liquid makes the module suitable for hazardous applications such as detecting toxic substances, strong acid, strong alkali, and all kinds of liquid in an airtight container under high pressure.
- There are no special requirements for the liquid or container and this liquid sensor is easy to use and easy to install.
- The liquid level sensor is equipped with an interface adapter that makes it compatible with DFRobot Gravity interface. Four levels of sensitivity can be configured by pressing the SET button.
- See more on Amazon...
Brand: DFROBOT | Manufacturer: DFROBOT
Weight: 0.02 Pounds
See On Amazon #7
Taidacent Double Liquid Detect Optical Level Sensor Module Infrared Water Level Sensor Liquid Level Monitor Sensor Relay Switch Output for Tank Automatic Water Level Control System (Pumping Type)
Asin: B082Y77MMD | Ean: 0734831005391 | UPC: 734831005391
Output: Relay Switch Output Withstand Current Up To 30A.
Insulation Resistance: 100Mω.
Response Time: <500Ms.
The Working Current: <100Ma.
Features
- the working voltage: AC85 ~ 265V
- the working current: <100MA
- output: relay switch output withstand current up to 30A
- Response time: <500ms
- Insulation resistance: 100M
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon #8
Taidacent Lock-in Amplifier AD630 Module Minimum System Phase Sensitive Detection Weak Signal Conditioning Balanced Modulation
Asin: B07CXMRBTG | Model: AD630 | PartNumber: AD630 | Ean: 6440267897021
Its Signal Processing Applications Include: Balanced Modulation And Demodulation, Synchronous Detection, Phase Detection, Quadrature Detection, Phase Sensitive Detection, Lock Amplification, And Square Wave Multiplication..
Chip Features (1) The Signal Can Be Recovered From 100 Db Noise (2) Channel Bandwidth: 2 Mhz (3) Slew Rate: 45V/Us (4) Crosstalk: -120 Db (1 Khz) (5) Pin-Programmable, Closed-Loop Gain: ±1 And ±2 (6) Closed-Loop Gain Accuracy And Matching: 0.05% (7) Channel Offset Voltage: 100 Uv (Ad630bd) (8) 350 Khz Full Power Bandwidth.
In The Lock-In Amplifier Circuit, When It Is Used As A Synchronous Demodulator, It Can Recover Weak Signals In A 100 Db Noise Background. The Ad630's Optimal Operating Frequency Is At 1 Khz..
The Ad630 Is A High-Precision Balanced Modulator With A Flexible Commutation Structure And Offers Laser Laser Wafer-Adjusted Thin Film Resistors With Excellent Accuracy And Temperature Stability..
Features
- This AD630 lock-in amplifier is an integrated OPA627 preamplifier and 4th-order ultra low-pass Butterworth filter, forming a set of lock-in amplification of the smallest system that can detect and extract weak signals, but also available Modulation function to AD630.
- The AD630 is a high-precision balanced modulator with a flexible commutation structure and offers laser laser wafer-adjusted thin film resistors with excellent accuracy and temperature stability.
- Its signal processing applications include: balanced modulation and demodulation, synchronous detection, phase detection, quadrature detection, phase sensitive detection, lock amplification, and square wave multiplication.
- In the lock-in amplifier circuit, when it is used as a synchronous demodulator, it can recover weak signals in a 100 dB noise background. The AD630's optimal operating frequency is at 1 kHz.
- Chip features (1) The signal can be recovered from 100 dB noise (2) Channel bandwidth: 2 MHz (3) Slew rate: 45V/us (4) Crosstalk: -120 dB (1 kHz) (5) Pin-Programmable, Closed-Loop Gain: 1 and 2 (6) Closed-loop gain accuracy and matching: 0.05% (7) Channel Offset Voltage: 100 uV (AD630BD) (8) 350 kHz full power bandwidth
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon #9
Taidacent Non Contact Levels of Measurement Flow Sensor Water Level Sensor Level Transmitter Float Switch Water Level Switch PNP Output
Asin: B07FC4Z2V6 | Model: Y26-PNP | PartNumber: Y26-PNP | Ean: 0702004746228 | UPC: 702004746228
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Pnp Output: If There Is Induction, The Output Is High Level; No Induction, Disconnected.
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
The Liquid Level Sensor (Probe) Is Installed Above And Below The Outer Wall Of The Container To Be Tested (The High And Low Positions Of The Liquid Level). The Non-Metallic Container Does Not Need To Be Opened, And The Installation Is Simple And Does Not Affect The Production..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- PNP output: If there is induction, the output is high level; no induction, disconnected
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search