3D Printer Glass Bed Upgraded, Borosilicate Glass Plate for Creality Ender 3 Pro Ender 5 Pro 235x235x3mm Build Surface Replacement with 4 Glass Clips
Asin: B07FRM5SR7 | Model: 004004 | PartNumber: 004004 | Ean: 0643858249438 | UPC: 643858249438
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Flat Enough】This Printer Glass Bed Is Amazingly Flat. Smooth Flat Surface Improves The Quality Of Your 3D Printing.
【Warranty And Service】30 Days No Questions Money Back. If It Is Cracked During Shipped, Please Contact Us For Free Replacement.
【Compatibility】The 3D Printer Parts Is Applicable With Creality 3D Printers Of Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, Cr-20, Cr-20 Pro, Please Confirm If This Glass Print Bed Compatible With Your Printer.
【Size】235Mm X 235Mm X 3Mm..
Features
- Borosilicate Glass This material has Ultra-low thermal expansion, heat resistant and high temperature shock resistance, much better than tempered glass. High binding power when heating, easy to separate the plastic parts when cooling
- Size 235mm x 235mm x 3mm.
- Flat Enough This Printer Glass bed is amazingly flat. Smooth flat surface improves the quality of your 3D printing
- Compatibility The 3D printer parts is applicable with Creality 3D printers of Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro, please confirm if this glass print bed compatible with your printer
- Warranty and Service 30 days no questions money back. If it is cracked during shipped, please contact us for free replacement
- See more on Amazon...
Brand: VoyageX | Manufacturer: vx
See On Amazon Similar To 3D Printer Glass Bed Upgraded
#1
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm (1)
Asin: B07X3WBNPX
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.08 x 9.25 x 9.25 Inches | Weight: 0.55 Pounds
See On Amazon #2
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 8.66x8.66x9.84 inch
Asin: B07BR3F9N6 | Model: Ender 3 | PartNumber: Ender 3 | Ean: 0796862079093, 0649910035087, 0680577986473, 0193621889328 | UPC: 649910035087, 680577986473, 796862079093, 193621889328
Advanced Extruder Technology: Upgraded Extruder Greatly Reduces Plugging Risk And Bad Extrustion; V-Shape With Pom Wheels Make It Move Noiseless, Smoothly And Durable..
Strict Test: Strict Testing For Key Components Before Delivery And Life-Time Technical Supports Available..
Safety Protected Power Supply: Only Needs 5 Minutes For Hot Bed To Reach 100 Degree..
Easy And Qucik Assembly: It Comes With Several Assembled Parts, You Only Need About 2 Hours To Assemble 20 Nuts Well..
Features
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 100 degree.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.31 x 16.14 x 16.54 Inches | Weight: 15.43 Pounds
Warranty: 1 year
See On Amazon #3
Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm
Asin: B07RD6D2ZQ | Model: Dawnblade190503 | PartNumber: Dawnblade190503 | Ean: 0745679683719 | UPC: 745679683719
Excellent Flatness - Improved 3D Printer Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro And Cr-20, Cr-20 Pro, Pls Confirm If This Borosilicate Glass Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed. This Borosilicate Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Ender 3 Glass Plate Has A Much Smaller Creality Logo Than Older Version, Avoiding Leaving Logo Indentations On Molds Surface During 3D Printing..
Features
- No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
- No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
- See more on Amazon...
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 9.25 x 9.25 Inches
See On Amazon #4
Polymaker ASA Filament 1.75mm Black, 1kg ASA 3D Printer Filament, Heat & Weather Resistant - ASA 3D Filament Perfect for Printing Outdoor Functional Parts, Dimensional Accuracy +/- 0.03mm
Asin: B09DKPYYBP | Model: PF01001 | PartNumber: PF01001 | Ean: 6938936709947
♻️ 【Cardboard Spool】 - Comes In Upgraded 3.0 Version Packaging With Fully Recycled Cardboard Spool And Box.
⚙️ 【Printing Settings】 - Nozzle: 250˚C; Bed: 90˚C; Speed: 50Mm/S (Settings Can Be Adjusted Depending On The 3D Printer, You Can Refer To The 3D Printer Abs 1.75Mm Filament Settings) To Print Large Parts Without Warping Issue, We Recommend Using An Enclosed Printer To Maintain A Warm Environment Around The Print.
🌡️ 【High Heat Resistance And Mechanical Properties】 - Polylite Asa Can Resist Temperatures Up To 100˚C (212°F) And Display High Toughness And Impact Resistance For Functional Application. ( Same Properties As 3D Printer Filament Abs ).
Features
- Weather Resistant - PolyLite ASA UV filament has all the properties of 3D filament ABS with the additional features of being weather resistant. Our ASA is UV resistance and resistant to environmental stress cracking. PolyLite ASA can be used outdoor for outside application such as RC planes or car accessories
- High Heat Resistance and Mechanical Properties - PolyLite ASA can resist temperatures up to 100 C (212 F) and display high toughness and impact resistance for functional application. ( Same properties as 3D printer filament ABS )
- Cardboard Spool - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
- Printing Settings - Nozzle: 250 C; Bed: 90 C; Speed: 50mm/s (Settings can be adjusted depending on the 3D printer, you can refer to the 3d printer abs 1.75mm filament settings) To print large parts without warping issue, we recommend using an enclosed printer to maintain a warm environment around the print
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 4.33 x 2.76 x 4.72 inches | Weight: 2.20 pounds
See On Amazon #5
Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)
Asin: B08B8PVSJG | Model: Outus-Glue Sticks-098 | PartNumber: Outus-Glue Sticks-098
Easy To Use And Clean: These Pvp Solid Glue Sticks Can Be Easily Applied With Flat Or Straight Objects, Such As Ruler, Id Card, Glass Plate And So On, Just Lightly Apply Glue To The Area Of The Printing Bed Being Applied, Only In The Effective Printing Area, No Need To Cover The Entire Surface; The 3D Printer Build Plate Is Easily Cleaned With Water After Cooling Down.
Package Contents: You Will Receive Sufficient Quantity Of 3D Printer Glue Sticks, Can Satisfy Your Daily Needs, Easy To Carry And Store, Ensuring You A Long-Term Use; Each Glue Stick Measures Approx. 98 X 24 Mm/ 3.8 X 0.94 Inches, Lightweight And Portable.
Compatibility: These 3D Printer Glue Sticks Are Compatible With All 3D Printer Heated Bed, Including Build Surface Sheet Plate, Aluminum And Glass Plate And So On, Bring A Nice Using Experience. Suitable For Project Crafts, School Projects, Art Crafts And So On, It Is Recommended That Put The Lid On After Each Use To Prevent Glue Drying Out.
Safe And Long-Lasting: These 3D Printer Glue Sticks Are Made Of Quality Pvp Material, Non-Toxic And Acid-Free, Will Not Hurt People's Body, They Come With High Viscosity Formula And Have Nice Adhesion To Hot Plate Or Hot Bed, Easy To Remove The Printing Models, Suitable For The First Layer Before Printing; 1 Piece Of Glue Stick Can Last For More Than 100 Average Prints, Practical To Help 3D Print Parts Adhere To The Build Plate During Printing.
Features
- Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging.
- Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing; 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing
- Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface; The 3D printer build plate is easily cleaned with water after cooling down
- Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice using experience. suitable for project crafts, school projects, art crafts and so on, it is recommended that put the lid on after each use to prevent glue drying out
- Package contents: you will receive sufficient quantity of 3D printer glue sticks, can satisfy your daily needs, easy to carry and store, ensuring you a long-term use; Each glue stick measures approx. 98 x 24 mm/ 3.8 x 0.94 inches, lightweight and portable
- See more on Amazon...
Brand: Outus | Manufacturer: Outus
Weight: 0.02 Pounds
See On Amazon #6
Creality CR Touch Auto Bed Leveling Sensor Kit for 3D Printer with Metal Push Pin for Ender 3/Ender 3 V2/Ender 3 Pro/3 Max/Ender 5 pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B0995H2X92 | Model: 3DZDTPZHTJ | PartNumber: 3DZDTPZHTJ
Features
- Creality 3D Printer Auto Bed Leveling Kit - The Creality cr touch auto bed leveling kit fulfilled simple structure and high precision. Performs multi-point detection on the printing platform and records the height of each detection point. Stable quality, long service life, and can be reused more than 100,000 times.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 3.93 x 2.48 x 1.61 inches | Weight: 0.26 pounds
See On Amazon #7
Mefine Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm
Asin: B08CXLLCH4 | Model: Ender3GLB | PartNumber: Ender3GLB | Ean: 0778992842808 | UPC: 778992842808
Easy To Remove: It Is Very Easy To Remove The Prints. The Surface Of Our Tempered Glass Bed Is A Layer Of The Microporous Composite Coating. It Will Contract As The Hot Bed Cooling Which Greatly Ensures The Prints Can Be Removed Manually Without Any Tools..
High-Grade Material: Made Of 100% Genuine Borosilicate Glass, Thick And High Quality. The Glass Bed's Hardness Is Up To 8 Mohs And Is Capable To Work Up To 400 ℃. Wipe Clean With Water To Start The Next Print. Scrubbing The Glass Platform With Alcohol Is Not Recommended, It Can Damage The Surface Coating Which Increases Adhesion. We Offer A 90-Day Free Replacement, Any Problems, Feel Free To Get In Touch With Us..
Excellent Flatness: Upgraded Ender 3 Build Plate With Smaller Creality Logo Provides A Flatter And Smoother Build Surface Than A Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Mold During 3D Printing..
No Edge Curling: The Composite Coating Of Our Tempered Glass Bed Has Super Strong Adhesion After Heating, Prints Can Be Stuck On The Build Surface Firmly Without Glue, Avoiding The Issue Of The Print's Edges Curling. Equipped With 4 Clips To Fix The Hotbed..
Features
- Compatibility: Officially authorized Creality glass bed, applicable for Creality 3D printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, CR-20, CR-20 Pro, other 3D printers with a print area of 220*220mm(note for Ender 5 S1) and most of the Cartesian style 3D printers with an MK2 MK3 hotbed. Please make sure the printing size of your printer's platform is compatible. and to be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first.
- No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be stuck on the build surface firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.
- Easy to Remove: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of the microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
- Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides a flatter and smoother build surface than a magnetic mat or PEI sticker, ensuring high flatness for the bottom of mold during 3D printing.
- High-Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. The glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Wipe clean with water to start the next print. Scrubbing the glass platform with alcohol is not recommended, it can damage the surface coating which increases adhesion. We offer a 90-day free replacement, any problems, feel free to get in touch with us.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #8
Anycubic Kobra 2 Neo 3D Printer, Upgraded 250mm/s Faster Printing Speed with New Integrated Extruder Details Even Better, LeviQ 2.0 Auto-Leveling Smart Z-Offset Ideal for Beginners 8.7"x8.7"x9.84"
Asin: B0CCRDBH76
【Details Even Better】Apply The Linear Propulsion And Input Shaping Functions In Marlin Firmware To Reduce Spillage And Print Resonance, Improve Print Quality And Stability, And Create Smoother And Clearer Model Details. Novices Can Also Produce High-Quality Works For Their First Print..
【Excellent Customer Service】 Each Anycubic Kobra 2 Neo 3D Printer Comes With A One-Year After Service (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
【Leviq 2.0 Automatic Leveling】With The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users And Usage Scenarios, So As To Start Creation Efficiently And Easily, And Also For Novices..
【New Integrated Extruder】The Newly Upgraded Extrusion System And Cooling System Melt Filaments Quickly Through The 60W Hot End. At The Same Time, It Is Equipped With A 7000 Rpm Cooling Fan To Ensure Rapid Cooling And Molding Of The Model..
Features
- 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
- New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
- Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
- LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
- Excellent Customer Service Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year after service (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 19.00 x 17.00 x 17.00 Inches | Weight: 18.74 Pounds
Warranty: 1 year warranty and lifetime technical support
See On Amazon #9
Polymaker ABS Filament 1.75mm Black, ABS 3D Printer Filament 1.75mm Heat Resistant 1kg - PolyLite ABS 3D Printing Filament 1.75mm, Strong & Durable, Dimensional Accuracy +/- 0.03mm
Asin: B09DKQR8HD | Model: PE01001 | PartNumber: PE01001 | Ean: 6938936710158
Features
- Cardboard Spool - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 2.76 x 3.54 x 7.09 inches | Weight: 2.20 pounds
See On Amazon #10
Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, Tempered Glass Build Plate for Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 3 V2, 235x235 4mm
Asin: B08XXVWN11 | Model: 6004010007 | PartNumber: 6004010007 | Ean: 0633690247198 | UPC: 633690247198
0.15Mm Of Flatness Recovery Model: This Is The Combination Of Glass And Composite. Due To The Flatness Of Glass And The Uniform Composite Coating Of Surface 'Lattice', The Platform Has Excellent Flatness..
High Hardness And Durable: This Is The Combination Of Chemically Tempered Glass And Surface Composite Coating. The Flatness Of Glass Will Be Much Better And The Composite Coating Of Surface 'Lattice' Will Be Uniform, Which Makes The Platform Have Excellent Flatness..
Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
High Viscosity And Strong Adhesion: Composite Nano Molecule Coating Has High Viscosity After Heating, Which Makes The Model Have Strong Adhesion..
Features
- Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
- High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
- 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
- Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
- See more on Amazon...
First Available: 03/30/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 0.16 x 9.25 x 9.25 inches
Warranty: 2 year manufacturer
See On Amazon #11
Ender 3 V3 KE PEI Spring Steel 235x235mm, Texture PEI Sheet Magnetic Flexible Heated Bed, Ender 3 V3 SE Build Plate for Creality K1C/K1/Ender 3 V3/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo
Asin: B0CRDS6PRR
Strong Magnetic Force - The Pei Sheet 235X235mm Is Selection Of Strong Magnetic Paste, High Temperature Can Still Maintain A High Degree Of Magnetism, To Ensure The Stability Of Printing. The Ender 3 V3 Se Build Plateis Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print, It Can Print With Most Filaments, Such As Pla / Abs / Asa / Petg / Tpu / Nylon / Pa / Pc..
Wide Compatibility - The Pei Sheet 235X235mm And Peo Smooth Surface Is Perfect For Elegoo Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Creality K1c/K1/Ender 3 V3/Ender 3 V3 Se/Ender 3 V3 Ke/Cr-10 Se/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/Cr 20/ Cr 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer..
Positioning Holes Design - Double Handles + Positioning Holes Design, Precise Positioning, Easy And Simple Installation. The Pei Spring Steel 235X235mm Makes The Prints Easy To Adhere To The Printing Surface, And It Is Easy To Remove The Prints And Flex Slightly To Pop Your Print Right Off..
Excellent Flatness - The Ender 3 V3 Ke Pei Magnetic Heated Bed Provides The High Flatness Spring Steel, Ensuring The Model Can Be Firmly Attached To The Surface Of The Print Platform, Can Be Repeated Bending Without Deformation, Easy To Take The Model..
Features
- Premium Quality PEI Coating - The Creality K1 PEI Spring Steel 235x235mm is made of High temperature resistant PEI coating on the surface, high abrasion resistance and high strength frosted texture, the PEI build surface is not easy to scratch.
- Excellent Flatness - The Ender 3 V3 KE PEI Magnetic Heated Bed provides the high flatness spring steel, ensuring the model can be firmly attached to the surface of the print platform, can be repeated bending without deformation, easy to take the model.
- Strong Magnetic Force - The PEI Sheet 235x235mm is selection of strong magnetic paste, high temperature can still maintain a high degree of magnetism, to ensure the stability of printing. The ender 3 V3 SE Build Plateis excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print, it can print with most filaments, such as PLA / ABS / ASA / PETG / TPU / Nylon / PA / PC.
- Positioning Holes Design - Double handles + positioning holes design, precise positioning, easy and simple installation. The PEI spring steel 235x235mm makes the prints easy to adhere to the printing surface, and it is easy to remove the prints and flex slightly to pop your print right off.
- Wide Compatibility - The PEI sheet 235x235mm and PEO smooth surface is perfect for ELEGOO Neptune 3 Pro/Neptune 4/Neptune 4 PRO/Creality K1C/K1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/CR-10 SE/Ender 3/ Ender 3 Pro/Ender 3V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3S/CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro/ 3D Printer.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #12
Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro and All 235 * 235mm Size 3D Printer
Asin: B0BRQ7LRNC | Model: CR-PEI0105 | PartNumber: CR-PEI0105 | Ean: 0783970029119 | UPC: 783970029119
【Easy Model Removal】When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print.This Surface Is Easily Removed And Flexible. Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.Compatible With Pla/Petg/Peek/Abs And Any Other Filaments..
【Simple Installation】The Ender 3 V2 Pei Sheet Is Combined With 2 Parts, A Flexible Steel Platform Textured Pei Surface On One Side, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top.Spring Stainless Steel, Pei Powder Sprayed On The Surface, Golden Yellow On The Back. Flexible, Removable, And Can Stick To Magnetics Very Well. High Strength And Heat Resistance..
【Excellent Adhesion】Easy To Adhere To The Printing Surface, Easy To Remove The Prints, Flex Slightly To Pop Your Print Right Off. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well..
Features
- Creality Official Creality Official Golden PEI Plate Kit,We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120 C Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Excellent Adhesion Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well.
- Easy Model Removal When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- Simple Installation The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance.
- Wide Application The size of ender 3 PEI is 235*235mm 9.25*9.25inch). please re-level it to improve the printing effect. it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.Compatible with PLA/PETG/PEEK/ABS and any other filaments.
- See more on Amazon...
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
Weight: 1.39 Pounds
See On Amazon #13
Creality Original 3D Printer NTC100K Thermistor Temp Sensor 5 Pack Quick Replacement Single Ended Glass Sealed for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer(30cm/11.8inch)
Asin: B0BJJQGC17 | Model: 3D-Thermistor-5P | PartNumber: 3D-Thermistor-5P
🌡【Single-Ended Glass Sealed】The Glass Material Used In The Package Ensures The Maximum Service Life With Precision Temperature Measurement, Resistance To High Temperatures, And Fast Temperature Conduction..
🌡【Official Creality 3D Store】Official Creality 3D Store! We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🌡【Easy To Install】Only 4 Steps To Install, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Thermistor Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance..
🌡【The Temperature Measurement】 -30 °C ~ +300 °C, Can Replace The Original Creality 3D Printer Nct Thermistor. Fit For Printing High-Temperature Filament..
Features
- Upgrade NTC Thermistor 100% Official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- The Temperature Measurement -30 C ~ +300 C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- Single-ended Glass Sealed The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- Easy to Install Only 4 steps to install, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- Official Creality 3D Store Official Creality 3D Store! We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #14
SUNLU PLA Filament 1.75mm Black 1KG, Neatly Wound PLA Meta 3D Printing Filament, Tougher and Fast Printing, Dimensional Accuracy +/- 0.02 mm, 1KG Spool(2.2lbs), Fits for Most FDM 3D Printers
Asin: B0B1ZV6CJM | Model: DCUS-PLAMT-WT-1KG | PartNumber: DCUS-PLAMT-WT-1KG
[Color Upgrade & Good Compatibility] 1Kg Pla Meta With Unique Macaron Color Brings Smooth Surface Printing And High-Precision Visual Experience To The Art, Decoration, Home And Other Industries. Compatible With Most Of Fdm 3D Printers. Perfect For Beginners And Experienced Users. Black Pla Meta Is Made From Raw Materials Derived From Plant..
[Customer Service] Sunlu Offers All Kinds Of 3D Printing Products You Need, Such As 3D Filaments, Filament Dryers, Fdm 3D Printers, 3D Pen, 3D Resins, Lcd 3D Printer And Other Accessories. If You Have Any Question About Sunlu 3D Filament, Please Don't Hesitate To Contact Us. You Can Add The Pla Meta Filament To Shopping Cart First To Help Quick Finding..
[Neat Line & Professional Packing] Fully Mechanical Winding And Strict Manual Inspection Reduce The Risk Of Entanglement. 100% Neatness Rate High Speed Pla Filament Speeds Up Printing Efficiency. Professional Vacuum Packing 3D Filament Ensures That The Filaments Received By Customers Are Damp-Free And Good Printer Quality..
[Dimensional Accuracy & Consistency] Sunlu Has Ensured Pla Filament Of 1.75Mm Diameter And Dimensional Accuracy +/- 0.02Mm Through Technology And Strict Control. Minimum Tolerances Provide The Extruder Nozzle With Ideal Flow, Low Warping And Clog-Free. The Larger Spool Bore Design Reduces Friction, Ensures Much Smoother And More Stable Printing..
Features
- [FASTER PLA META FILAMENT] Compared to filament, Sunlu pla meta filament has 1.5 times the fluidity of ordinary PLA, realizing the characteristics of fast printing and energy saving. In the process of 3d printing, 3d printer filament pla meta has excellent toughness and adhesion, not brittle. Even if the model falls from a height to the ground, it is not easy to break.
- [DIMENSIONAL ACCURACY & CONSISTENCY] SUNLU has ensured pla filament of 1.75mm diameter and dimensional accuracy +/- 0.02mm through technology and strict control. Minimum tolerances provide the extruder nozzle with ideal flow, low warping and clog-free. The larger spool bore design reduces friction, ensures much smoother and more stable printing.
- [COLOR UPGRADE & GOOD COMPATIBILITY] 1KG Pla meta with unique macaron color brings smooth surface printing and high-precision visual experience to the art, decoration, home and other industries. Compatible with Most of FDM 3D printers. Perfect for beginners and experienced users. Black pla meta is made from raw materials derived from plant.
- [NEAT LINE & PROFESSIONAL PACKING] Fully mechanical winding and strict manual inspection reduce the risk of entanglement. 100% Neatness rate high speed pla filament speeds up printing efficiency. Professional vacuum packing 3d filament ensures that the filaments received by customers are damp-free and good printer quality.
- [CUSTOMER SERVICE] SUNLU offers all kinds of 3D printing products you need, such as 3D filaments, filament dryers, FDM 3D printers, 3D pen, 3D resins, LCD 3D printer and other accessories. If you have any question about SUNLU 3d filament, please don't hesitate to contact us. You can add the pla meta filament to shopping cart first to help quick finding.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLUGW
Weight: 2.20 pounds
See On Amazon #15
Creality CR Touch Auto Leveling Kit, 3D Printer Bed Auto Leveling Sensor Kit for Ender 3/ Ender 3 Pro/Ender 3 V2/ Ender 3 Max/Ender 5/ and CR 10 with 32 Bit V4.2.2/V4.2.7 Mainboard
Asin: B09DVYZSYJ | Model: CRTOUCH | PartNumber: CRTOUCH
【Independent Research And Development Stable Function】Cr Touch Is A Creality 3D Research Institute Self-Developed 3D Printer Platform Leveling Solution Based On Hundreds Of Millions Of User Data Used By The Creators. Compared With The Traditional Automatic Leveling , It Is Compatible With More 3D Printer Platforms, More Stable And Cose-Effective. With Stable Quality And Long Service Life, It Can Be Reused For More Than 100,000 Times..
【Strong Compatibility】Creality Cr Touch Auto Leveling Kit Compatible With Pei / Sticker / Glass / Metal Platform..
【Package Include】1*Cr Touch Auto Leveling Sensor, 5*0.4Mm Nozzle, 3*Moounting Brackets, 1*Installation Guide, 3*Tie And 4*Screw.
【Multi-Point Detection Smart Compensation】Cr Touch Performs Multi-Point Detaction On The Printing Platform And Records The Heigh Of Each Detaction Point. The System Builds A Virtual Plane Based On The Height Of Each Point And Calculates The Tilt Angle Between The Nozzle And The Platform To Automatically Compensates For Different Points..
【About Reflash The Firmware】1. Download The Corresponding Firmware From The Creality Official Website. 2. Copy It To The Sd Card. 3. Rename It To 123.Bin, 4. Insert The Sd Card Into The Printer, 5. When The Power Is On, The Cr Touch Firmware Will Be Updated. (Note: Check Your Motherboard Version And Download The Correct Cr Touch Firmware)..
Features
- Wide Application This Creality cr touch auto-leveling kit is equipped with 3 mounting brackets and is only suitable for the following 3D printers with V4.4.2/V4.2.7 motherboards (Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/cr 10), other machines are not compatible. Please confirm your machine and motherboard version before purchasing.
- About Reflash the Firmware 1. Download the corresponding firmware from the Creality official website. 2. copy it to the SD card. 3. Rename it to 123.bin, 4. Insert the SD card into the printer, 5. When the power is on, the cr touch firmware will be updated. (Note: Check your motherboard version and download the correct CR touch firmware).
- Independent research and development Stable function CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times.
- Multi-point detection Smart compensation CR Touch performs multi-point detaction on the printing platform and records the heigh of each detaction point. The system builds a virtual plane based on the height of each point and calculates the tilt angle between the nozzle and the platform to automatically compensates for different points.
- Strong compatibility Creality CR Touch auto leveling kit Compatible with PEI / sticker / glass / metal platform.
- Package Include 1*CR Touch Auto Leveling Sensor, 5*0.4mm Nozzle, 3*Moounting brackets, 1*Installation Guide, 3*Tie and 4*Screw
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.29 pounds
See On Amazon #16
Creality 3D Ender 3 Glass Bed Clips 8 Pcs, 3D Printer 7mm Stainless Steel Silver Bed Clips 3D Bed Clamps for Ender 3 Series Ender 5 Series CR-10 Series Heated Bed Platform
Asin: B09MNC1RKJ | Model: 8 Bed Clip | PartNumber: 8 Bed Clip
⭐【Simple Installation】Install And Remove By Hand Without Any Other Tools. Just Slide The Clips In From A Side Of The Glass Plate Or Heat Bed To Hold Them. Please Remove The Magnetic Surface Stuck To The Heat Bed Before Using Our Clips..
⭐【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
⭐【Compatibility】 It Is Compatible With Ender 3 Series Ender 5 Series, Cr-10 Series 3D Printer, And Other 3D Printers Which Bed Platform Total Thickness Is 7Mm (Normally 3Mm Thickness Heat Bed And 4Mm Glass Bed, Not Suitable For Hotbed With Magnetic Bases)..
⭐【Perfect Fit】These Is A Vast Improvement Over Binder Clips Or Adjustable Glass Bed Clamps. Small But Have Nice Stability And Firm Fixation, Keep Your Build Plate From Sliding Around. You Can Use Almost Full Room For Printing. They Are Low Profile That Won't Strike The Printer Head And Don't Get In The Way Of The Cables Anywhere Near..
Features
- Premium Material Bed Clips are made of quality stainless steel material, which is corrosion-resistant, rust-resistant, and sturdy, which can be applied for a long time. It works better than original binder clips, no worry it pops out, breaks, or gets rusty.
- Perfect Fit These is a vast improvement over binder clips or adjustable glass bed clamps. Small but have nice stability and firm fixation, keep your build plate from sliding around. You can use almost full room for printing. They are low profile that won't strike the printer head and don't get in the way of the cables anywhere near.
- Simple Installation Install and remove by hand without any other tools. Just slide the clips in from a side of the glass plate or heat bed to hold them. Please remove the magnetic surface stuck to the heat bed before using our clips.
- Compatibility It is compatible with Ender 3 Series Ender 5 Series, CR-10 Series 3D Printer, and other 3D printers which bed platform total thickness is 7mm (Normally 3mm thickness heat bed and 4mm glass bed, Not suitable for hotbed with magnetic bases).
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #17
Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers Resume Print and Model Preview 8.66*8.66*9.84 inch
Asin: B08BL41ZMY | Model: Ender 3 V2 Neo | PartNumber: Ender 3 V2 Neo | Ean: 8935672542577, 8935672542508, 8935672542539, 0735209618557 | UPC: 735209618557
3.Brand New 4.3 Inch Ui User Interface: The Upgraded Ui Adds A Model Preview Function, Making It Easier To Observe The Printing Shape And Progress For Customers. Which Is Convenient For You To Know About The Model Status. Also, It Supports Nine Languages For Different Customers Demand..
5.Silent Motherboard: The Mainboard Is 4.2.2 Version But It Is Silent Mainboard Which Is Different From Ender 3 Mainboard. This Ender-3 V2 Neo Equipped With Self-Developed Silent Motherboard, Which Has Stronger Anti-Interference, Faster And More Stable Motion Performance, Silent Printing And Low Decibel Operation, Create A Quiet Environment.The Extruder Is Upgraded To Full-Metal Extruder, Which Has Greater Extrusion Force And Is More Durable, Reducing The Risk Of Nozzle Blockage..
4.Pc Spring Steel Magnetic Build Plate: Different From Ender 3, Ender 3 Pro And Ender 3 V2, This New-Released Fdm 3D Printer Comes With A Removable Pc Spring Steel Magnetic Build Plate. The Innovative Printing Platform Is A Combination Of A Pc Coating, A Spring Steel Sheet And A Magnetic Sticker, Which Sticks To The Surface Immediately When Released. The Pc Coating Brings Good Adhesion For Filament, And The Finished Models Can Be Easily Removed By Bending The Print Sheet..
2.Cr Touch Auto Bed Leveling: Upgraded Cr Touch 16-Point Automatic Bed Leveling Technology Saves You In The Trouble Of Manual Leveling. Easy To Use, The Intelligent Leveling System Can Automatically Compensate For The Printing Height Of Different Points Of The Hot Bed. It Saves Much More Time For Customers In Long-Time Leveling Adjustment, Quickly Finish The Leveling Process..
Features
- 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to users and beginners in assembly process, which will save much time. It is convenient for customers to install it in quick way, more efficient.
- 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the hot bed. It saves much more time for customers in long-time leveling adjustment, quickly finish the leveling process.
- 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for customers. Which is convenient for you to know about the model status. Also, it supports nine languages for different customers demand.
- 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel magnetic build plate. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion for filament, and the finished models can be easily removed by bending the print sheet.
- 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo equipped with self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation, create a quiet environment.The extruder is upgraded to full-metal extruder, which has greater extrusion force and is more durable, reducing the risk of nozzle blockage.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 18.58 x 17.24 x 16.70 inches | Weight: 17.20 pounds
Warranty: 1 year
See On Amazon #18
Creality Original Ultra-Flexible Removable Magnetic Build Surface Heated Bed Cover for Ender 3 V2 Neo/ pro/ S1/Ender 5 3D Printer 235X235MM
Asin: B07HNWSMXY | Model: Ender 3-Magnetic | PartNumber: Ender 3-Magnetic | Ean: 0667797511685 | UPC: 667797511685
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
Universal: Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Simple Installation: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate..
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Features
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
- UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Brand: Ender | Manufacturer: Creality 3D
See On Amazon #19
3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/5
Asin: B07FQWTZ3Y | Ean: 0649910300666 | UPC: 649910300666
Compatible With Abs, Pla, Hips, And Another Filament. Works With All Fdm Printer Models..
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Materials..
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films..
Build Sheet Adheres To The Hot Bed To Help The Filament Stuck During Printing, While Also Helping Remove The Printed Model Afterward..
Features
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.
- Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.30 x 9.25 x 9.25 inches
See On Amazon #20
ANYCUBIC 3D Printer Kobra 2 Neo, 250mm/s Max Print Speed FDM 3D Printer Auto-Leveling Smart Z-Offset Upgraded Kobra Neo, Easy Assembly for Beginners Print Size 8.7"x8.7"x9.84"
Asin: B0CF4GVT8N
【Details Even Better】Apply The Linear Propulsion And Input Shaping Functions In Marlin Firmware To Reduce Spillage And Print Resonance, Improve Print Quality And Stability, And Create Smoother And Clearer Model Details. Novices Can Also Produce High-Quality Works For Their First Print..
【Excellent Customer Service】 Each Anycubic Kobra 2 Neo 3D Printer Comes With A One-Year After Service (With The Print Head Warrantied For 3 Months And The Heated Bed For 6 Months), And Lifetime Technical Support. If You Have Any Questions You Can Reach Us At Amazonsupport@Anycubic.Com.
【Leviq 2.0 Automatic Leveling】With The Design Of A Unique Module, The Z-Axis Offset Is Intelligently Compensated After Automatic Leveling, And The Z-Axis Compensation Value Is Supported To Meet The Needs Of Different Users And Usage Scenarios, So As To Start Creation Efficiently And Easily, And Also For Novices..
【New Integrated Extruder】The Newly Upgraded Extrusion System And Cooling System Melt Filaments Quickly Through The 60W Hot End. At The Same Time, It Is Equipped With A 7000 Rpm Cooling Fan To Ensure Rapid Cooling And Molding Of The Model..
Features
- 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
- New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
- Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
- LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
- Excellent Customer Service Each Anycubic Kobra 2 Neo 3D Printer comes with a one-year after service (with the print head warrantied for 3 months and the heated bed for 6 months), and lifetime technical support. If you have any questions you can reach us at amazonsupport@anycubic.com
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 20.00 x 15.00 x 20.00 Inches | Weight: 1.13 pounds
Warranty: 1 year warranty and lifetime technical support
See On Amazon
Looking For Something Else?
Search