HSS 15mm x 1.25 Metric Tap Right Hand Thread M15 x 1.25mm Pitch
Asin: B07FSKS34S | Model: 15mm x 1.25mm | PartNumber: 15mm x 1.25mm | Ean: 0755320652063 | UPC: 755320652063
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Total Length: 95Mm.
Qty: 1Pcs.
Material: Hss.
Features
- HSS 15mm x 1.25 Metric Tap Right Hand Thread
- Material: HSS
- Total length: 95mm
- Qty: 1pcs
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon Similar To HSS 15mm x 1.25 Metric
#1
uxcell Reduced Shank Twist Drill Bits 15mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D8QBBK | Model: a19102500ux0065 | PartNumber: a19102500ux0065
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 15mm / 0.59"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 75mm / 2.95"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #2
Century Drill & Tool 95620 Metric Hex Die, 14.0X1.25
Asin: B00BEZWDYQ | Model: 95620 | PartNumber: 95620 | Ean: 0081838956202 | UPC: 081838956202
Precision Cut Threads For Accurate Threading..
Brand: Century Drill & Tool | Manufacturer: Century Drill & Tool Corp
Dimensions: 0.50 x 1.50 x 1.50 inches | Weight: 0.15 pounds
See On Amazon #3
GEARWRENCH 1/4" Drive Standard Metric Socket 15mm, 6 Point - 80137
Asin: B000O3IJEW | Model: 80137 | PartNumber: 80137 | Ean: 0099575801372 | UPC: 099575801372
Hard Stamped Size Markings.
Chamfered Opening Quickly Guides Fasteners Into Socket.
Features
- Off-corner loading design reduces fastener rounding
- Chamfered opening quickly guides fasteners into socket
- Hard stamped size markings
- See more on Amazon...
Brand: GEARWRENCH | Manufacturer: Apex Tool Group
Dimensions: 1.75 x 3.47 x 0.82 Inches | Weight: 0.06 Pounds
Warranty: Standard Limited Lifetime
See On Amazon #4
Aceteel M16 x 1.25 Metric Tap and Die Set, M16 X 1.25mm HSS Machine Thread Tap and M16 X 1.25mm Alloy Tool Steel Round Thread Die Right Hand
Asin: B09PZW6H12 | Model: M16x1.25mm | PartNumber: M16x1.25mm
Tap Material: High Speed Steel, Die Material: Alloy Tool Steel..
Package Include: 1 Pc M16x1.25Mm Metric Tap & 1 Pc M16x1.25Mm Metric Round Die..
Application: Process Steel, Iron, Aluminum, Copper And Other Metals, Widely Used In Thread Repair And Other Processing..
Die Od: 1.5"/38Mm, H: 0.39"/10Mm..
Features
- Tap Length: 4.02"/102mm, Thread Head Length: 1.26"/32mm.
- Die OD: 1.5/38mm, H: 0.39/10mm.
- Tap Material: High Speed Steel, Die Material: Alloy Tool Steel.
- Application: Process steel, iron, aluminum, copper and other metals, widely used in thread repair and other processing.
- Package Include: 1 pc M16x1.25mm Metric Tap & 1 pc M16x1.25mm Metric Round Die.
- See more on Amazon...
Brand: Aceteel | Manufacturer: Aceteel
Weight: 0.31 pounds
See On Amazon #5
uxcell Round Steel Rod, 15mm HSS Lathe Bar Stock Tool 150mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool
Asin: B07SYHMP5R | Model: a19050800ux0856 | PartNumber: a19050800ux0856
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 15mm / 0.59"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
HSS 15mm x 1.5 Metric Tap Right Hand Thread M15 x 1.5mm Pitch
Asin: B07HK5BX4B | Model: M15 x 1.5mm | PartNumber: M15 x 1.5mm | Ean: 0753318615090 | UPC: 753318615090
Total Length: 102Mm.
Qty: 1Pcs.
Material: Hss.
Features
- HSS Metric Tap Right Hand Thread M15 x 1.5mm Pitch
- Material: HSS
- Total length: 102mm
- Qty: 1pcs
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #7
Drill America - DWDRSD15.0MM 15.00mm Reduced Shank High Speed Steel Drill Bit with 1/2" Shank, DWDRSD Series
Asin: B00FXIACMA | Model: DWDRSD15.0MM | PartNumber: DWDRSD15.0MM | Ean: 0887861035484 | UPC: 887861035484
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Drilling In Low And Medium Tensile Strength Materials.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for drilling in low and medium tensile strength materials
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.50 x 8.00 x 0.50 Inches | Weight: 0.30 Pounds
See On Amazon #8
XtremeAmazing M14 x 1.5mm Metric HSS Tap and Die Set Right Hand Thread
Asin: B07G9ZX2J7 | Ean: 0675663435539 | UPC: 675663435539
Application Range: Use For Carbon Steel, Alloy Steel And Cast Iron, Such As Through Hole Processing.Allows Tap To Be Used In Hand Or Power-Driven Applications.
Package Contents: 1 X Tap And Die Set.
Round Die: Not Easily Broken Tooth Chip Fast, Abrasion Resistance And Long Service Life..
Features
- Size: M14X1.5mm, Pitch:1.5mm
- Round Die: Not easily broken tooth chip fast, abrasion resistance and long service life.
- Application Range: Use for carbon steel, alloy steel and cast iron, such as through hole processing.allows tap to be used in hand or power-driven applications
- Package Contents: 1 x Tap and Die Set
- See more on Amazon...
Brand: XtremeAmazing | Manufacturer: XtremeAmazing
See On Amazon #9
uxcell 15mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MFNHZYV | Model: a18103100ux0178 | PartNumber: a18103100ux0178
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 15mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 Inches | Weight: 0.00 Pounds
See On Amazon #10
TEKTON 1/2 Inch Drive x 15 mm Hex Bit Socket | SHB23215
Asin: B07R8J8BMS | Model: SHB23215 | PartNumber: SHB23215 | Ean: 0020209025383 | UPC: 020209025383
Large, Clear Die-Stamped Size Marking Is Easy To Read And Can’T Wear Off.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Four Detent Grooves Provide A Secure Connection With The Drive Tool And A Drilled Through-Hole Allows Locking On With Retaining Pin.
6-Sided Hexagonal Tip Is Machined To Precise Tolerances For An Exact Fit With Hex Fasteners.
Features
- S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
- 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners
- Large, clear die-stamped size marking is easy to read and can t wear off
- Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 1.10 x 2.20 x 1.10 Inches | Weight: 0.35 Pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #11
HSS 14mm x 1.25 Metric Tap Left Hand Thread M14 x 1.25mm Pitch
Asin: B07HK6LGKH | Model: M14 x 1.25mm | PartNumber: M14 x 1.25mm | Ean: 0753318615168 | UPC: 753318615168
Total Length: 89Mm.
Qty: 1Pcs.
Material: Hss.
Features
- HSS Metric Tap Left Hand Thread M14 x 1.25mm Pitch
- Material: HSS
- Total length: 89mm
- Qty: 1pcs
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #12
HSS M15 x 1.25mm Tap and M15 x 1.25mm Die Metric Thread Right Hand
Asin: B07L67714K | Model: M15 x 1.25mm | PartNumber: M15 x 1.25mm | Ean: 0634769984495 | UPC: 634769984495
Die Od: 38Mm; H: 10Mm.
Package Included: 1 X Tap & 1 X Die.
Tap Long: 90Mm.
Features
- M15 x 1.25mm Tap & M15 x 1.25mm Die Metric Thread Right Hand HSS
- Tap Long: 90mm
- Die OD: 38mm; H: 10mm
- Package included: 1 x Tap & 1 x Die
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #13
HSS 14mm x 1.5 Metric Die Right Hand Thread M14 x 1.5mm Pitch
Asin: B07FSMQRM8 | Model: 14mm x 1.5mm | PartNumber: 14mm x 1.5mm | Ean: 0755320651479 | UPC: 755320651479
Outside Diameter: 38Mm.
Qty: 1Pcs.
Thickness: 14Mm.
Material: Hss.
Features
- HSS 14mm x 1.5 Metric Die Right Hand Thread
- Material: HSS
- Outside diameter: 38mm
- Thickness: 14mm
- Qty: 1pcs
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #14
HSS M15 x 1mm Tap and M15 x 1.0mm Die Metric Thread Right Hand
Asin: B07L67T5H3 | Model: M15 x 1mm | PartNumber: M15 x 1mm | Ean: 0634769983863 | UPC: 634769983863
Die Od: 38Mm; H: 10Mm.
Package Included: 1 X Tap & 1 X Die.
Tap Long: 90Mm.
Features
- M15 x 1mm Tap & M15 x 1.0mm Die Metric Thread Right Hand HSS
- Tap Long: 90mm
- Die OD: 38mm; H: 10mm
- Package included: 1 x Tap & 1 x Die
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #15
AUTOKAY M14 x 1.5mm Metric HSS Tap and Die Set Right Hand Thread
Asin: B0B2QNLY16
Application: Use For Carbon Steel, Alloy Steel And Cast Iron, Such As Through Hole Processing.Allows Tap To Be Used In Hand Or Power-Driven Applications.
Package Include: 1 X Tap And Die Set.
Round Die: Not Easily Broken Tooth Chip Fast, Abrasion Resistance And Long Service Life..
Features
- Size: M14 X 1.5mm, Pitch:1.5mm
- Round Die: Not easily broken tooth chip fast, abrasion resistance and long service life.
- Application: Use for carbon steel, alloy steel and cast iron, such as through hole processing.allows tap to be used in hand or power-driven applications
- Package Include: 1 x Tap and Die Set
- See more on Amazon...
Brand: AUTOKAY | Manufacturer: AUTOKAY
See On Amazon #16
YUFUTOL 15mm Square Straight Carbide Cutter Insert(15mm length X15mm widthX2.5mm thickness),Pack of 10, Designed for Spiral/Helical Planer Cutter Head Wood Lathe Tool
Asin: B01NCR8P6O | Ean: 0712022312282 | UPC: 712022312282
Easy To Replace Your Jointers And Planers, Excellent Accessory For Wood Working And Lathe Turning Work..
If 1 Knife Edge Is Dull Or Nicked, Just Turn It To Another Edge Which Greatly Reduces You Down Time..
Four Usable Edge(15Mm Lengthx15mm Width X2.5Mm Thick-30* Cutting Angle, And All Are Of The Same Sharpness.
15Mm Straight Square Face, No Face Radius, It's Easy To Mix Up. Designed For Numerous Spiral/Helical Planer Cutter Head System,Will Fits M6x8 Flat Screw.
Features
- Made of solid tungsten carbide, providing you a better experience and durable use
- 15mm straight square face, No face radius, it's easy to mix up. Designed for numerous spiral/helical planer cutter head system,will fits M6X8 Flat screw
- Easy to replace your jointers and planers, excellent accessory for wood working and lathe turning work.
- Four usable edge(15mm lengthX15mm width X2.5mm Thick-30* Cutting angle, and all are of the same sharpness
- If 1 knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
- See more on Amazon...
Brand: YUFUTOL | Manufacturer: LA HARDWARE INC
Dimensions: 0.87 x 2.60 x 0.87 Inches | Weight: 0.14 Pounds
See On Amazon #17
HSS M15 x 1.5mm Tap and M15 x 1.5mm Die Metric Thread Right Hand
Asin: B07L67GPJ4 | Model: M15 x 1.5mm | PartNumber: M15 x 1.5mm | Ean: 0634769984532 | UPC: 634769984532
Die Od: 38Mm; H: 14Mm.
Package Included: 1 X Tap & 1 X Die.
Tap Long: 101Mm.
Features
- M15 x 1.5mm Tap & M15 x 1.5mm Die Metric Thread Right Hand HSS
- Tap Long: 101mm
- Die OD: 38mm; H: 14mm
- Package included: 1 x Tap & 1 x Die
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #18
Auniwaig HSS Round Steel Rod,15mm Dia Lathe Bar Stock Tool 150mm/5.9" Length,for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle Cylindrical Pin DIY Craft Tool 1pcs
Asin: B096K4JZN2 | Model: CU8900S2404HF-FBA | PartNumber: CU8900S2404HF-FBA
【Meet Your Needs】- Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything;You Can Cut To Any Size You Want According To Your Needs.
【Parameter】- Diameter: 15Mm/0.59Inch ; Length: 150Mm / 5.91 Inch; High-Speed Steel Rod Is With Combination Of Hardness And Toughness For Wear Resistance;Hardness Hrc 60±1.
【General Purpose】- Lathe Bar Stock Is Widely Used For Processsing Milling Cutters, Sharp Knives;Gravers;Punch Press Needles;Bearings Sleeve Rods Of Machine Tools;High Hard Ejector Rods And Mold Center Pins.
【Versatile Steel Rods】- This Round Rods Bar Is Ideal For Processing Top Circle; End Face;Bore;Thread;Plane;Step;Groove;Suitable For Copper;Aluminum; Unhardened Steel Items.
Features
- Use Note - Please add some oil during storage and reduce contact with air or do not expose to air for rust protection;The surface is smooth; easy to shape;no cracks formed
- Versatile Steel Rods - This round rods bar is ideal for processing top circle; end face;bore;thread;plane;step;groove;Suitable for copper;aluminum; unhardened steel items
- Meet Your Needs - Steel Rods can be easy to cut and formed into replacement parts for almost anything;You can cut to any size you want according to your needs
- General Purpose - Lathe Bar Stock is widely used for processsing milling cutters, sharp knives;gravers;punch press needles;bearings sleeve rods of machine tools;high hard ejector rods and mold center pins
- Parameter - Diameter: 15mm/0.59inch ; length: 150mm / 5.91 inch; High-speed steel rod is with combination of hardness and toughness for wear resistance;hardness HRC 60 1
- See more on Amazon...
Brand: Auniwaig | Manufacturer: Auniwaig
See On Amazon #19
HSS 15mm x 1 Metric Tap Right Hand Thread M15 x 1mm Pitch
Asin: B07DFRK8LB | Model: M15 x 1mm | PartNumber: M15 x 1mm | Ean: 0755320646086 | UPC: 755320646086
Total Length: 91Mm.
Qty: 1Pcs.
Material: Hss.
Features
- HSS Metric Tap Right Hand Thread M15 x 1mm Pitch
- Material: HSS
- Total length: 91mm
- Qty: 1pcs
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #20
uxcell Reduced Shank Drill Bit 15mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS3WKCW | Model: a18101200ux0152 | PartNumber: a18101200ux0152
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 15mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 Inches
See On Amazon
Looking For Something Else?
Search