Axial Solid Axle Housing Front and Rear: AR44 SCX10 II, AXIC1592
Asin: B07FXRMTTM | Model: AXIC1592 | PartNumber: AXIC1592 | Ean: 0816874017606 | UPC: 816874017606
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.First Available: 09/24/2022
Brand: Axial | Manufacturer: Axial
Dimensions: 1.37 x 7.00 x 6.50 inches | Weight: 0.14 pounds
Warranty: Through Manufacturer
See On Amazon Similar To Axial Solid Axle Housing Front
#1
Jeremywell UCP202-10 Pillow Block Bearing (2 Pack), 5/8 inch Bore, 2 Bolt Flange Mounted, Solid Cast Iron Base, Self-Alignment
Asin: B01IWGKNVE | Model: PB-UCP202-10-2PCS | PartNumber: PB-UCP202-10-2PCS
Self-Aligning Feature: These Bearings Use Wide Inner Ring Ball Bearings With Self-Aligning Spherical Outside Diameters That Compensate For Shaft Misalignment..
Material: Made To Last, Our Mounted Bearings Consist Of Chrome Steel (Aisi 52100) Ball Bearings For Higher Resistance And Durability..
Pre-Lubricated: Bearings Come Pre-Lubricated And Ready For Immediate Installation. A Grease Fitting Is Supplied For Re-Lubrication..
Solid Base Housing: Jeremywell Pillow Blocks Are Manufactured Without Cavities And Fillers, Their Solid Base Makes The Bearings Stronger And More Durable. A Solid Base Helps Eliminate Material Build-Up And Is Easy To Maintain Unlike A Hollow Base Housing..
Features
- Design: UCP pillow block series has two-bolt mounting with set screw locking.
- Solid Base Housing: Jeremywell pillow blocks are manufactured without cavities and fillers, their solid base makes the bearings stronger and more durable. A solid base helps eliminate material build-up and is easy to maintain unlike a hollow base housing.
- Self-Aligning Feature: These bearings use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
- Pre-lubricated: Bearings come pre-lubricated and ready for immediate installation. A grease fitting is supplied for re-lubrication.
- Material: Made to last, our mounted bearings consist of chrome steel (AISI 52100) ball bearings for higher resistance and durability.
- See more on Amazon...
Brand: Jeremywell | Manufacturer: Jeremywell
Dimensions: 1.00 x 1.00 x 0.00 inches | Weight: 2.60 pounds
See On Amazon #2
Axial Currie F9 Portal Axle Housing, 3rd Member Steering: Capra 1.9 UTB, AXI232004
Asin: B07XZBCDCZ | Model: AXI232004 | PartNumber: AXI232004 | Ean: 0605482494295 | UPC: 605482494295
First Available: 09/24/2022
Brand: Axial | Manufacturer: Axial
Dimensions: 1.27 x 7.00 x 4.00 inches
See On Amazon #3
Vgoohobby RC Front & Rear Steel Drive Shaft CVD Axle Compatible with Axial SCX10 II 90046 90047 1/10 RC Car
Asin: B09MS79L27 | Model: XZ312 | PartNumber: XZ312 | Ean: 0780861160821 | UPC: 780861160821
Upgrade Part,Enhances The Rc Crawler Car Performance In Handling And Durability..
Total Length:106Mm/4.17";Package Includes 2Pcs Front Scx10 Ii Cvd Axle & 2Pcs Rear Scx10 Ii Cvd Axle..
Increased Size Universal Joint For Maximum Strength At The Joint;Easy And Convenient For Installation..
Made Of High Strength Hardened Steel,Durable And Strong..
Features
- The steel CVD shaft ONLY compatible with Axial SCX10 II 90046 90047 1/10 rc car, does not fit other rc models.
- Made of high strength hardened steel,durable and strong.
- Upgrade part,enhances the RC crawler car performance in handling and durability.
- Increased size universal joint for maximum strength at the joint;Easy and convenient for installation.
- Total Length:106mm/4.17;Package includes 2Pcs Front SCX10 II CVD axle & 2Pcs Rear SCX10 II CVD axle.
- See more on Amazon...
Brand: Vgoohobby | Manufacturer: Vgoohobby
See On Amazon #4
INJORA Underdrive Gears Differential Axle Steel Gears 1/12T Steel Worm Gears Upgrade Parts for AX24 SCX24 C10 JLU Gladiator Bronco Deadbolt Axial 1/24 RC Crawler Car
Asin: B0BFKFCS1Q | Model: SCX24-141-12T | PartNumber: SCX24-141-12T
【Free Style】Tooth Count Is Etched On The Pinion Gear For Easy Identification..
【Excellent Performance】The Front And Rear Differentials Each House A Worm Screw And Worm Gear Setup To Get The Power To The Axles And Create Higher Ground Clearance.
【New Upgrades】Compared With Original Scx24 16T, Underdrive 2/12T Gears Can Decrease Speed Approx 33%.
【Premium Quality】Steel Upgrade Gears Are More Durable, Solid And Abrasion Proof..
Features
- Wide Application Suit for Axial SCX24 whole series trucks, such as C10 JLU Gladiator Bronco Deadbolt
- Premium Quality Steel upgrade gears are more durable, solid and abrasion proof.
- Free Style Tooth count is etched on the pinion gear for easy identification.
- New Upgrades Compared with original SCX24 16T, underdrive 2/12T gears can decrease speed approx 33%
- Excellent Performance The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #5
Axial AR45P Portal Axle Housing, Front: SCX10 III, AXI232022
Asin: B0863XJ36H | Model: AXI232022 | PartNumber: AXI232022 | Ean: 0605482689806 | UPC: 605482689806
First Available: 03/19/2020
Brand: Axial | Manufacturer: Axial
Dimensions: 1.45 x 6.00 x 4.00 inches | Weight: 0.05 Pounds
See On Amazon #6
OGRC 2Pcs Steel Front Axle Drive Shaft CVD Set for Axial SCX24 C10/JLU/Bronco/Gladiator/Deadbolt Upgrades Parts (Regular)
Asin: B0BLJFTY2K | Model: ORC206 | PartNumber: ORC206
▶【Superior Steel】Ogrc Scx24 Cvd Shaft Is Made Of Steel Material, High Working Reliability, Ensuring Maximum Durability And For Long Time Service Life..
▶【Customer Service】If You Are Not 100% Completely Satisfied With Our Products, Please Do Not Hesitate To Contact Us!.
▶【Easy To Install】Perfect Fitting Scx24 Front Axles, Precision Machining, Non Destructive Installation, Simple Operation..
▶【Great Performance】The Scx24 Axle Shaft Provide Great Transmission Efficiency To Help Your Crawler Car Adapt To Complex Terrain And Steer Flexibly..
Features
- Compatible With The SCX24 front axle shaft fits for SCX24 C10/JLU/Bronco/Gladiator/Deadbolt RC crawler car.
- Great Performance The SCX24 Axle Shaft provide great transmission efficiency to help your crawler car adapt to complex terrain and steer flexibly.
- Superior Steel OGRC SCX24 CVD shaft is made of steel material, high working reliability, ensuring maximum durability and for long time service life.
- Easy to Install Perfect fitting SCX24 front axles, precision machining, non destructive installation, simple operation.
- Customer Service If you are not 100% completely satisfied with our products, please do not hesitate to contact us!
- See more on Amazon...
Brand: OGUNKE | Manufacturer: OGUNKE RC
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #7
INJORA Overdrive Gears Differential Axle Steel Gears 13T Steel Worm Gears Upgrade Parts for AX24 SCX24 C10 JLU Gladiator Bronco Deadbolt Axial 1/24 RC Crawler Car
Asin: B09YRQLJQ9 | Model: SCX24-77-13T | PartNumber: SCX24-77-13T
【Free Style】Two Types Of Gears Are Available, Tooth Count Is Etched On The Pinion Gear For Easy Identification..
【Excellent Performance】The Front And Rear Differentials Each House A Worm Screw And Worm Gear Setup To Get The Power To The Axles And Create Higher Ground Clearance.
【New Upgrades】Compared With Original Scx24 16T, Overdrive 13T Gears Can Increase Speed Approx 23%.
【Premium Quality】Steel Upgrade Gears Are More Durable, Solid And Abrasion Proof..
Features
- Wide Application Suit for Axial SCX24 whole series trucks, such as C10 JLU Gladiator Bronco Deadbolt
- Premium Quality Steel upgrade gears are more durable, solid and abrasion proof.
- Free Style Two types of gears are available, tooth count is etched on the pinion gear for easy identification.
- New Upgrades Compared with original SCX24 16T, overdrive 13T gears can increase speed approx 23%
- Excellent Performance The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 2.76 x 2.32 x 0.28 inches
See On Amazon #8
Heavy Duty Steel Front CVD Drive Shaft Set for 1/10 Axial Wraith 90018 RC Truck
Asin: B071GYLJRT | Model: Que-T | PartNumber: Que-T | Ean: 0608119782796 | UPC: 608119782796
Suitable For 1/10 Axial Wraith Rc Truck..
Lightweight Upgrade Instantly Enhances Overall Performance In Handling And Durability..
High Quality Materials And Superb Craftsmanship,Sturdy And Durable..
Color:As Pictures Shown..
Features
- Material: Heavy Duty Steel .
- Color:as pictures shown.
- Suitable for 1/10 Axial Wraith RC Truck.
- High quality materials and superb craftsmanship,sturdy and durable.
- Lightweight upgrade instantly enhances overall performance in handling and durability.
- See more on Amazon...
Brand: QUE-T | Manufacturer: Que-T
See On Amazon #9
KYX Racing Hard Steel Front Axle CVD Drive Shaft for RC Crawler Car Axial Capra Unlimited Trail Buggy UTB
Asin: B0855QTMP1 | Model: A2006 | PartNumber: A2006 | Ean: 0722020903306 | UPC: 722020903306
Universal Joint Axles Allow Up To 45 Degrees Of Steering And Provide Smoother Action For A Higher Performing, Efficient Drivetrain..
Package Included: 2Pcs Cvd Shafts..
Made Of High Quality Hard Steel. Sturdy And Durable, Easy To Install..
Features
- This Hard Steel Front Axle CVD Shaft is for Axial Capra Unlimited Trail Buggy
- Made of high quality hard steel. Sturdy and durable, easy to install.
- Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.
- Package Included: 2pcs cvd shafts.
- See more on Amazon...
Brand: KYX | Manufacturer: KYX Racing
See On Amazon #10
Axial Steering Axle, Assembled: SCX24, AX24, AXI31609
Asin: B07SZ9JZYH | Model: AXI31609 | PartNumber: AXI31609 | Ean: 0605482298534 | UPC: 605482298534
First Available: 09/24/2022
Brand: Axial | Manufacturer: Axial Racing
Dimensions: 1.07 x 4.00 x 2.50 inches | Weight: 0.06 pounds
Warranty: Through Manufacturer
See On Amazon #11
Steel Axle Front CVD Drive Shafts for 1/10 RC Axial Wraith 90018 90048 RR10
Asin: B07FVSZHY4 | Ean: 0600607166521 | UPC: 600607166521
Come Assembled For Easy Installation, Ultra High Strength Cross Pins.
Some Rubbing May Occur Initially At The Link Mount Screws Due To Larger Diameter Shafts..
Increased Size Universal Joint For Maximum Strength At The Joint.
Material: Hard Steel.
Features
- 1/10 RC Axial Wraith 90018 90048 RR10 RC Car
- Material: Hard Steel
- Come assembled for easy installation, Ultra high strength cross pins
- Increased size universal joint for maximum strength at the joint
- Some rubbing may occur initially at the link mount screws due to larger diameter shafts.
- See more on Amazon...
Brand: QUE-T | Manufacturer: Que-T
See On Amazon #12
INJORA RC Axle Metal Front and Rear Portal Axle with Protector V2 Gear for 1/10 RC Crawler Car Axial SCX10 & SCX10 II 90046 90047(Black)
Asin: B09DVJ99RQ | Model: YQCQ-04 | PartNumber: YQCQ-04
Newly Upgraded Gears That Are Not Easily Damaged. Optimized Gear Ratio – 3.75 Compared. This Reduces Torque Twist Which Is Typically Seen With Other Small Pumpkin Axle Designs..
Hardened Steel Gears And Drive Shaft, Use All Scx10-Ii Linkage, Suit For 1/10 Rc Crawler Car Axial Scx10 Ii 90046..
Come With Protect Armor, Servo Arm, 12Mm Wheel Hex, Nuts And Screws, Easy To Install..
Diamond-Shaped Pumpkin For Increased Clearance A More Realistic, Scale Look..
Features
- The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle.
- Diamond-shaped pumpkin for increased clearance a more realistic, scale look.
- Newly upgraded gears that are not easily damaged. Optimized gear ratio 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs.
- Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install.
- Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 1/10 RC Crawler Car Axial SCX10 II 90046.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
Dimensions: 3.15 x 10.24 x 7.48 Inches
See On Amazon #13
INJORA Metal Front Axle Shaft for 1:10 RC Crawler INJORA SCX10 YQCQ-01 Axle Replacement Parts
Asin: B09ST94C89
Replacement Parts For 1:10 Rc Crawler Scx10 Yqcq-01 Axle Replacement Parts.
Note: Please Check Whether The Picture Accessories Fit Your Axle Before You Buy.
Upgrade Material To Enhance The Hardness.
Features
- 100% brand new and high quality
- Upgrade material to enhance the hardness
- Replacement parts for 1:10 RC Crawler SCX10 YQCQ-01 Axle Replacement Parts
- Note: Please check whether the picture accessories fit your axle before you buy
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #14
INJORA Axle Gear Overdrive Worm Differential 13T 14T Steel Gear Upgrade Parts for AX24 Axial SCX24 C10 JLU Gladiator Bronco 1/24 RC Crawler Car, 2PCS
Asin: B09YV5TL2Y | Model: SCX24-77-1314T | PartNumber: SCX24-77-1314T
【Free Style】Three Combinations Are Available, Tooth Count Is Etched On The Pinion Gear For Easy Identification..
【New Upgrades】 Overdrive The Front Will Pull You Faster In The Front, It Allows You To Climb Better And Reduce Rollover..
【Excellent Performance】The Front And Rear Differentials Each House A Worm Screw And Worm Gear Setup To Get The Power To The Axles And Create Higher Ground Clearance..
【Premium Quality】Steel Upgrade Gears Are More Durable, Solid And Abrasion Proof..
Features
- Wide Application Suit for Axial SCX24 whole series trucks, such as C10 JLU Gladiator Bronco Deadbolt.
- Premium Quality Steel upgrade gears are more durable, solid and abrasion proof.
- Free Style Three combinations are available, tooth count is etched on the pinion gear for easy identification.
- Excellent Performance The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
- New Upgrades Overdrive the front will pull you faster in the front, it allows you to climb better and reduce rollover.
- See more on Amazon...
Brand: INJORA | Manufacturer: INJORA
See On Amazon #15
CODA RACING Brass Diff Cover Front&Rear for AXIAL SCX24 Deadbolt C10 Gladiator Brocon Upgrades 1/24 RC Crawler Car
Asin: B09QWC2FT5 | Model: CDRSCX2402BL | PartNumber: CDRSCX2402BL
5.6G Each Fitted To The Front And Rear Axles To Lower The Vehicles Center Of Gravity.Increase Its Stability..
Includes 5.6G Brass Diff Cover(2).Screws(12).Wrench(1).
Precision Cnc Machined Solid Brass Billet..
Features
- Fits: Axial SCX24 Deadbolt AXI90081.C10 AXI00001.Jeep Wrangler AXI00002.B-17 Betty AXI00004.Jeep Gladiator AXI00005.Ford Bronco AXI00006
- Precision CNC machined solid brass billet.
- 5.6g each fitted to the front and rear axles to lower the vehicles center of gravity.increase its stability.
- Includes 5.6g brass Diff Cover(2).Screws(12).Wrench(1)
- See more on Amazon...
Brand: CODA RACING | Manufacturer: CODA RACING
Dimensions: 0.24 x 0.98 x 0.59 inches
See On Amazon #16
AMK SCX10 III Brass Diff Cover 76g 1/10 Capra Portal Axle Differential Housing Front Rear Set for RC Crawler Axial SCX10 Pro UTB10 Upgrades AR45P
Asin: B0CKXVF6KZ
【Scx10 Brass Upgrades】Professional Brass Upgrades, Performance Upgrades Kit, Specially Designed And Crafted For 1/10 Rc Crawlers Scx10 Iii, Pro And Capra.
【Anti-Corrosion】The Black Electrophoretic Coating Not Only Provides Rust And Corrosion Resistance, Enhancing The Lifespan Of The Diff Cover, But Also Gives 1/10 Crawler A Premium Look.
【Excellent Workmanship】Cnc Machining Provides Precise Dimensions Of Scx10 Pro Diff Cover, Perfectly Replacing The Stocks. Including The Hardware, All Fit Well.
【Scx10 Iii Brass Axle Cover】Made Of Brass, Weight Of 76G/2.68Oz, Only Makes The Axles More Robust And Durable, But Also Provide Additional Weights.
Features
- 1/10 Crawler Diff Cover Brass diff cover set includes front and rear one(2Pcs), compatible with Axial SCX10 III stock AR45P axles, 1/10 Capra stock portal axles, SCX10 Pro stock axles
- SCX10 III Brass Axle Cover Made of brass, weight of 76g/2.68oz, only makes the axles more robust and durable, but also provide additional weights
- SCX10 Brass Upgrades Professional brass upgrades, performance upgrades kit, specially designed and crafted for 1/10 RC crawlers SCX10 III, Pro and Capra
- Excellent Workmanship CNC machining provides precise dimensions of SCX10 Pro diff cover, perfectly replacing the stocks. Including the hardware, all fit well
- Anti-corrosion The black electrophoretic coating not only provides rust and corrosion resistance, enhancing the lifespan of the diff cover, but also gives 1/10 crawler a premium look
- See more on Amazon...
Brand: AMK | Manufacturer: AMK
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #17
Axial AX31438 AR44 High-Pinion Front Axle or Rear Locked Axle Complete Parts Set (53-Pieces) - Fits SCX10 II: AXIC1438 , Black
Asin: B06Y5SQRGR | Model: AX31438 | PartNumber: AX31438 | Ean: 0816874016302 | UPC: 816874016302
Small Pumpkin For Increased Clearance And A Scale Look, While Optimized 3.75 Gear Ratio Reduces Torque Twist.
Allows Up To 45 Degrees Of Steering And Provides Smooth Action For A Higher Performing, More Efficient Drivetrain.
Single Piece Axle Housing For Added Strength, 1-Piece All-Metal Locker, And Bolt On Link Mounts.
High Pinion Design Provides Added Ground Clearance And Better Drivershaft Angles.
Features
- Complete parts set lets you build either a complete front axle or a complete rear axle
- High pinion design provides added ground clearance and better drivershaft angles
- Small pumpkin for increased clearance and a scale look, while optimized 3.75 gear ratio reduces torque twist
- Single piece axle housing for added strength, 1-piece all-metal locker, and bolt on link mounts
- Allows up to 45 degrees of steering and provides smooth action for a higher performing, more efficient drivetrain
- See more on Amazon...
First Available: 11/21/2018
Brand: Axial | Manufacturer: Horizon Hobby
Dimensions: 1.50 x 8.25 x 5.85 inches | Weight: 0.46 Pounds
See On Amazon #18
KYX Racing Metal Currie F9 Portal Axle Housing Axle Shell with Housing Output for 1/10 RC Crawler Axial Capra Unlimited Trail Buggy UTB Front Axle
Asin: B087M5X4QZ | Model: A2021 | PartNumber: A2021 | Ean: 0722020903528 | UPC: 722020903528
Currie F9 Portal Axle Housing (For Front Axle)..
Package Included: 1Pcs Axle Housing, 1Pcs Housing Output And Some Mounting Screws..
Color: Black Housing & Black Cover..
Features
- This metal axle housing set is fit for 1/10 rc crawler Axial Capra Unlimited Trail Buggy UTB.
- Color: Black housing & Black cover.
- Currie F9 portal axle housing (for front axle).
- Package Included: 1pcs axle housing, 1pcs housing output and some mounting screws.
- See more on Amazon...
Brand: KYX | Manufacturer: KYX Racing
See On Amazon #19
Treal Capra Front Axle Housing CNC Solid Billet Aluminum 7075 One-Piece Design(Black)
Asin: B08CGS32DC | Model: T8035-0000-0001 | PartNumber: T8035-0000-0001 | Ean: 0768067173876 | UPC: 768067173876
❤Precision Tolerance Control To Make It Perfect Fit All Factory Inner Or Outer Portals..
❤Black And Clear Two Color Options.
❤Direct Replacement And Easy Install With All Hard Wares Needed..
❤Super Craftsmanship And Machining..
Features
- High quality solid billet aluminum 7075 to protect the center diff system.
- Super craftsmanship and machining.
- Precision tolerance control to make it perfect fit all factory inner or outer portals.
- Direct replacement and easy install with all hard wares needed.
- Black and clear two color options
- See more on Amazon...
Brand: Treal | Manufacturer: Treal Hobby
See On Amazon
Looking For Something Else?
Search