HSS 16mm x 2 Metric Taper and Plug Tap Right Hand Thread M16 x 2mm Pitch
Asin: B07GGXGBRW | Model: M16 x 2mm | PartNumber: M16 x 2mm | Ean: 0736900828849 | UPC: 736900828849
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Total Length: 89Mm.
Qty: 2Pcs.
Material: Hss.
Features
- HSS 16mm x 2 Metric Taper and Plug Tap Right Hand Thread
- Material: HSS
- Total length: 89mm
- Qty: 2pcs
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon Similar To HSS 16mm x 2 Metric
#1
3Pcs HSS Titanium Coated Step Drill Bit Set, 1/4" Hex Shank Quick Change High Speed Steel Cone Drill Bit Kit for Plastic, Wood, Metal Sheet, Aluminum Hole Drilling (Metric 4-12mm/4-20mm/4-32mm)
Asin: B07PR96VTK | Ean: 0722943812082 | UPC: 722943812082
【Easy Drilling】Two-Flute Design For Smoother Cutting. High Step Design Let You Feel The Stop And Never Drill Bigger In Mistake.
【Package Included】 3-Piece Hss Groove Step Drill Bit (4-12/ 4-20/ 4-32Mm ). 1/4" Hex Shaft Drives Are Suitable For All Kinds Of For Home Diy Power Drills..
【Set Includes】Bit #1 (5 Steps): 4-12Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm); Bit #2 (9 Steps): 4-20Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm); Bit #3 (15 Steps): 4-32Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm, 22Mm, 24Mm, 26Mm, 28Mm,30Mm,32Mm).
【Material】Hss Combined With A Titanium Coating. More Capable And Sturdy..
Features
- Widely Used Perfect Step Drill Bits suitable for drill holes in various material within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.
- Material HSS combined with a titanium coating. More capable and Sturdy.
- Easy Drilling Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake
- SET INCLUDES Bit #1 (5 steps): 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm); Bit #2 (9 steps): 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm); Bit #3 (15 steps): 4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm,30mm,32mm)
- Package Included 3-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ). 1/4 Hex shaft drives are suitable for all kinds of for home DIY power drills.
- See more on Amazon...
Brand: LepoHome | Manufacturer: LepoHome
See On Amazon #2
3Pcs HSS Spiral Step Drill Bit Set, 1/4" Hex Shank High Speed Steel Titanium Coated Cone Hole Cutter Bit with Automatic Center Punch for Drilling Plate Aluminum Metal Wood Hole (4-12mm/4-20mm/4-32mm)
Asin: B07RPQW7R1 | Ean: 0789659002282 | UPC: 789659002282
【Easy Drilling】Two-Flute Design For Smoother Cutting. High Step Design Let You Feel The Stop And Never Drill Bigger In Mistake.
【Package Included】 3-Piece Hss Sprial Groove Step Drill Bit (4-12/ 4-20/ 4-32Mm ) + 1 Automatic Center Punch. 1/4" Hex Shaft Drives Are Suitable For All Kinds Of For Home Diy Power Drills..
【Set Includes】Bit #1 (9 Steps): 4-12Mm (4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 11Mm,12Mm); Bit #2 (9 Steps): 4-20Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm); Bit #3 (15 Steps): 4-32Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm, 22Mm, 24Mm, 26Mm, 28Mm,30Mm,32Mm).
【Material】Hss Combined With A Titanium Coating. More Capable And Sturdy. Coated By Titanium,This Step Drill Set Performs Well In Heat,Corrosion And Rust Resistance..
Features
- Widely Used Perfect Step Drill Bits suitable for drill holes in various material within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.
- Material HSS combined with a titanium coating. More capable and sturdy. Coated by titanium,this step drill set performs well in heat,corrosion and rust resistance.
- Easy Drilling Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake
- SET INCLUDES Bit #1 (9 steps): 4-12mm (4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm,12mm); Bit #2 (9 steps): 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm); Bit #3 (15 steps): 4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm,30mm,32mm)
- Package Included 3-Piece HSS Sprial Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ) + 1 Automatic Center Punch. 1/4 Hex shaft drives are suitable for all kinds of for home DIY power drills.
- See more on Amazon...
Brand: LepoHome | Manufacturer: LepoHome
See On Amazon #3
ATOPLEE Metric Thread Tap,M16 HSS 6542 Right Hand Thread Tap (M16x2.0)
Asin: B01CHRFRM4 | Ean: 0769700163940 | UPC: 769700163940
Square Head Size:10X 10Mm (L*W) ,Net Weight: 0.11 Kg..
【Package Included】 1Pcs M16x2.0 Tap..
【Usage】When Using This Product For Tapping, It Can Be Used With Manual Equipment Or Special Processing Consoles, Such As Tapping Machines, Drill-In-One Bench Drills, Cnc Lathes, Machining Centers, Etc. With This Product, You Can Finish Tapping On Stainless Steel, Iron, Aluminum, Copper, General Steel And Other Materials..
【Size】Thread Diameter:16Mm,Total Length:102Mm ;Shank Diameter:12Mm, Pitch:2.0Mm；Thread Length：33Mm..
Features
- Material This thread tap is made of HSS 6542, which is stronger and more durable than ordinary taps.
- Size Thread Diameter:16mm,Total Length:102mm ;Shank Diameter:12mm, Pitch:2.0mm Thread Length 33mm.
- Square Head Size:10x 10mm (L*W) ,Net Weight: 0.11 kg.
- Usage When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc. With this product, you can finish tapping on stainless steel, iron, aluminum, copper, general steel and other materials.
- Package Included 1pcs M16x2.0 Tap.
- See more on Amazon...
Brand: ATOPLEE | Manufacturer: ATOPLEE
Dimensions: 0.47 x 4.02 x 0.47 inches | Weight: 0.02 Pounds
See On Amazon #4
uxcell M2 x 0.4 Spiral Point Thread Tap and 1.6mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TW2W5X8 | Model: a22010500ux0488 | PartNumber: a22010500ux0488
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance.
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Design, Downward Chip Removal, Right Hand Thread Cutting. Suitable For Processing Through-Hole Threads, And Tapping Aluminum, Stainless Steel, Bronze, Hard Plastics. Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Features
- Tap and Drill Bit: Tap thread size: M2 x 0.4, drill bit diameter: 1.6mm / 0.06". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point design, downward chip removal, right hand thread cutting. Suitable for processing through-hole threads, and tapping aluminum, stainless steel, bronze, hard plastics. Titanium coating provides excellent corrosion resistance and wear resistance.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
28 Pack Woodworking Chamfer Drilling Tools with a Case, Rocaris Including 6 Countersink, 5 Metric Step Drill Bit, 7 Counter Sinker Drill Bit Set with L-Wrench, 8 Wood Plug Cutter
Asin: B0BDLGG11M | Model: Rocaris | PartNumber: Rocaris
7 Pack Countersink Bit For Wood – Made Of High Carbon Steel With High Hardness & Abrasive Resistance, Large Chip Flute And Five Edge Chamfers Can Drain Saw Dust Faster And Easier(Size - 3Mm, 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 10Mm). With 1Pc Hex L-Wrench, You Could Easily Remove And Adjust Counter Sleeve Depth And Drill Depth..
6 Pack 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made Of High Speed Steel, They Are Pectect For Sinking 90° Hole In Wood And Pvc Board For Ountersunk Screw. Diameter- 6Mm(1/4"), 8Mm(5/16"), 9Mm(3/8"), 12Mm(1/2"), 16Mm(5/8"), 19Mm(3/4")..
8 Pack 3/8" Shank Wood Plug Cutter Drill Bit Set – Made Of Durable Carbon Steel, It Is Used For Tapered 1/4", 3/8", 1/2", 5/8" Corks To Cover Recessed Screw Holes Or Hide Imperfection. Can Cut The Plug 22Mm/23Mm/25Mm/26Mm In Depth As Well..
5 Pack Hss Titanium Coating Step Drill Bits: 3/16-1/2'', 1/8-1/2'', 1/4-3/4'', 3/16-7/8'', 1/4-1-3/8'', Suitable For Sheet Metal, Wood Board, Plastic, Aluminum Alloy, Copper, Not Recommended For High Carbon Steel, Hard Metal..
Features
- Cool Father's / Christmas Gifts for Dad:Are you searching for a suitable woodworking gift for dad? This Multi function drill tool kits can solve this problem, which Including countersink drill bits, L-wrench, wood plug cutter, step drill bit, center punch
- 5 Pack HSS Titanium Coating Step Drill Bits: 3/16-1/2'', 1/8-1/2'', 1/4-3/4'', 3/16-7/8'', 1/4-1-3/8'', suitable for sheet metal, wood board, plastic, aluminum alloy, copper, NOT recommended for high carbon steel, hard metal.
- 7 Pack Countersink Bit for Wood Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth.
- 8 Pack 3/8 Shank Wood Plug Cutter Drill Bit Set Made of durable carbon steel, it is used for tapered 1/4, 3/8, 1/2, 5/8 corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well.
- 6 Pack 1/4 Hex Shank 5 Flute Countersink Drill Bit Made of high speed steel, they are pectect for sinking 90 hole in Wood and PVC board for ountersunk screw. Diameter- 6mm(1/4), 8mm(5/16), 9mm(3/8), 12mm(1/2), 16mm(5/8), 19mm(3/4).
- See more on Amazon...
Brand: Rocaris | Manufacturer: Rocaris
Weight: 1.00 Pounds
See On Amazon #6
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 6542 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DCBT6D | Model: a19102500ux0084 | PartNumber: a19102500ux0084
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 56mm / 2.2"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
Aceteel M16 X 2.0 Metric Hand Tap, Right Hand M16 X 2.0mm Threading Hand Tap 1Pair
Asin: B09X88LDRD | Model: M16X2.0_Hand_Tap_RH | PartNumber: M16X2.0_Hand_Tap_RH
【Application】Make Or Repair Thread, Suitable For Most Metals, Alloy Steel, Cast Iron Etc..
【Package Included】M16x2mm Metric Hand Threading Tap 1 Pair..
【Usage】Mainly Used For Hand Use, Appropriate Addition Of Coolant Can Extend The Service Life When Tapping..
【Feature】Standard Thread Design, Made Of Alloy Tool Steel With High Hardness And Toughness..
Features
- Size Length: 4.02"/102mm, Thread Head: 1.26"/32mm, Square Head: 10.0mm x 10.0mm (L*W), Shank Diameter:12.5mm, Pitch: 2.0mm.
- Feature Standard thread design, made of alloy tool steel with high hardness and toughness.
- Application Make or repair thread, suitable for most metals, alloy steel, cast iron ETC.
- Usage Mainly used for hand use, appropriate addition of coolant can extend the service life when tapping.
- Package Included M16x2mm Metric Hand Threading Tap 1 Pair.
- See more on Amazon...
Brand: Aceteel | Manufacturer: Aceteel
Weight: 4.62 ounces
See On Amazon #8
Aceteel HSS 7/8"-14 UNF Machine Tap, 7/8 x 14 UNF Right Hand Thread Tap
Asin: B09SY64GFZ | Model: 7/8"-14 UNF | PartNumber: 7/8"-14 UNF
【Application】Make Or Repair Thread, Suitable For Most Metals, Copper, Alloy Steel, Cast Iron, Aluminum, Brass, Abrasive Steel, A3 Steel, Iron Plate Etc..
【Package Included】1Pc 7/8-14 Unf Right Hand Thread Tap..
【Usage】Can Be Used With Manual Equipment Or Special Processing Consoles For Tapping, Appropriate Addition Of Coolant Can Extend The Service Life When Tapping..
【Feature】Standard Thread Design, Made Of High-Speed Steel With High Hardness And Toughness, Provide Rapid Chip Removal For Efficient Threading..
Features
- Size Length: 4.65"/118mm, Thread Head: 1.06"/27mm, Square Head: 12.5mm x 12.5mm (L*W), Shank Diameter:16.0mm, Pitch: 14 TPI.
- Feature Standard thread design, made of High-speed steel with high hardness and toughness, provide rapid chip removal for efficient threading.
- Application Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
- Usage Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
- Package Included 1pc 7/8-14 UNF Right Hand Thread Tap.
- See more on Amazon...
Brand: Aceteel | Manufacturer: Aceteel
Weight: 6.35 ounces
See On Amazon #9
Drill America - DWTCS16X2S m16 X 2 Carbon Steel Tap Set (Set of 3), DWT Series
Asin: B00FXK7SQ6 | Model: DWTCS16X2S | PartNumber: DWTCS16X2S | Ean: 0887861098496 | UPC: 887861098496
Carbon Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Carbon Steel Hand Taps May Also Be Used To Thread Mild Steels.
Features
- Used to re-thread damaged and/or jammed threads
- Carbon Steel Hand Taps may also be used to thread mild steels
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #10
uxcell Metric Tap M16 x 1.5mm Pitch H2 Right Hand Thread, 14.5mm Drill Bit HSS 9341 Black Oxide with 1/2 Inch Straight Reduced Shank
Asin: B0BCFS61D4 | Model: f22040600ux0301 | PartNumber: f22040600ux0301
Suitable For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Appropriate Addition Of Coolant (E.G., Water) Can Extend The Service Life When Tapping..
High-Speed Steel Tool Is Good For Most General Purpose Applications, Featuring A Combination Of Hardness And Toughness For Wear Resistance.
Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
The Taper Taps Can Be Applied For Threading Machine And Electric Drills, Use To Cut Thread Inside Hole, Creating A Female Surface Which Functions Like A Nut..
Features
- Features: Metric Machine Tap [Shank Width: 9.8mm / 0.39 inch, Thread Length: 33.7mm / 1.33 inch, Total Length: 101mm / 3.98 inch], Reduced Shank Drill Bit[Cutting Diameter: 14.5mm / 0.57", Shank Diameter: 1/2" / 12.5mm (approx.), Cutting Edge Length: 78mm / 3.07", Overall Length: 157mm / 6.18"]
- The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut.
- Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
- Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- High-speed steel tool is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D11C6P | Model: a19102500ux0067 | PartNumber: a19102500ux0067
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 60mm / 2.36"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
X AUTOHAUX 2pcs 1/4" NPT to M16 x 1.5mm Male Straight Air Hose Fitting Connector Adapter
Asin: B07RLZM7SF
No Leakage Under High Pressure And Temperature..
1/4" Npt Pipe To M16x1.5Mm Male Connector Adapter; Straight..
Designed For Smooth Flow, Easy Assembly And Long Life..
Rust Resistance, Ductility At High Temperatures..
Features
- Adapter for connecting hoses and fittings of different types.
- Rust resistance, ductility at high temperatures.
- No leakage under high pressure and temperature.
- Designed for smooth flow, easy assembly and long life.
- 1/4 NPT Pipe to M16x1.5mm Male Connector Adapter; Straight.
- See more on Amazon...
Brand: X AUTOHAUX | Manufacturer: X AUTOHAUX
See On Amazon #13
Aceteel HSS 7/8"-18 UN Machine Tap, 7/8 x 18 UN Right Hand Thread Tap
Asin: B09SY6KWJC | Model: 7/8"-18 UN | PartNumber: 7/8"-18 UN
【Application】Make Or Repair Thread, Suitable For Most Metals, Copper, Alloy Steel, Cast Iron, Aluminum, Brass, Abrasive Steel, A3 Steel, Iron Plate Etc..
【Package Included】1Pc 7/8-18 Un Right Hand Thread Tap..
【Usage】Can Be Used With Manual Equipment Or Special Processing Consoles For Tapping, Appropriate Addition Of Coolant Can Extend The Service Life When Tapping..
【Feature】Standard Thread Design, Made Of High-Speed Steel With High Hardness And Toughness, Provide Rapid Chip Removal For Efficient Threading..
Features
- Size Length: 4.65"/118mm, Thread Head: 0.98"/25mm, Square Head: 12.5mm x 12.5mm (L*W), Shank Diameter:16.0mm, Pitch: 18 TPI.
- Feature Standard thread design, made of High-speed steel with high hardness and toughness, provide rapid chip removal for efficient threading.
- Application Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
- Usage Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
- Package Included 1pc 7/8-18 UN Right Hand Thread Tap.
- See more on Amazon...
Brand: Aceteel | Manufacturer: Aceteel
Weight: 6.35 ounces
See On Amazon #14
uxcell Step Drill Bit HSS 4241 4mm to 20mm 9 Sizes Titanium Coated Straight Flutes Hex Shank for Metal Wood Plastic
Asin: B07MFYM5SK | Model: a18120800ux0207 | PartNumber: a18120800ux0207
It Is Great For Drilling Holes For Iron, Metal, Aluminum, Copper, Wood, Plastic, Pvc Board And Many Other Types Of Sheets..
Note: High Temperature Will Affect The Working Life, Please Use Coolant While Drilling On Metals To Ensure The Drill Bit Working Properly. Please Keep It Properly Preserved. Avoid Falling The Bits From High Place..
Suitable For Hand-Held Drilling Rigs, Drilling Machines, Milling Machines And Machining Centers, For Metal Sheet, Maintenance And Modification, Bridge Doors And Windows, Home Appliances, Etc...
This Step Drill Bit Is Durable And Strong Enough To Punch And Drill Clean Holes In Materials Like Metal, Wood, Etc.. It Can Also Help To Enlarge Existing Holes And Clean Edges..
Features
- Shank Type: 6mm Hex Shank; Material: HSS 4241 with Titanium Coated; Drilling Diameters: 4mm/0.16", 6mm/0.24", 8mm/0.3", 10mm/0.4",12mm/0.47", 14mm/0.55", 16mm/0.6", 18mm/0.7", 20mm/0.8".
- This step drill bit is durable and strong enough to punch and drill clean holes in materials like metal, wood, etc.. It can also help to enlarge existing holes and clean edges.
- It is Great for drilling holes for iron, metal, aluminum, copper, wood, plastic, PVC board and many other types of sheets.
- Suitable for hand-held drilling rigs, drilling machines, milling machines and machining centers, for metal sheet, maintenance and modification, bridge doors and windows, home appliances, etc..
- Note: High temperature will affect the working life, please use coolant while drilling on metals to ensure the drill bit working properly. Please keep it properly preserved. Avoid falling the bits from high place.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 2.76 x 0.79 inches | Weight: 0.00 pounds
See On Amazon #15
Saipe M16 X 1.5 Metric Tap and Die Set M16 X 1.5mm HSS Straight Fluted Machine Thread Right Hand Screw Tap and Round Threading Die
Asin: B0C9Q8N8G3
Suitable For Processing Through Holes Or Shallow Holes On On Steel, Copper, Aluminum, Cast Iron And Other Materials. Can Be Used With Manual Equipment Or Special Processing Consoles, Such As Drill Presses, Tapping Machines, Cnc And Milling Machines..
Package Included: 1Pc M16 X 1.5Mm Thread Tap + 1Pc M16 X 1.5Mm Thread Die, 1.5Mm Pitch, Right Hand..
Design: Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, Debris Rapidly Discharged In The Tank. No Blocking And High Efficiency..
Round Die Material: High Quality Alloy Steel, Thread Size: M16 X 1.5; Outside Diameter (Od): 38Mm / 1.49"; Thickness: 14Mm / 0.55", Can Process, Correct Or Clean The External Threads..
Features
- Tap Material: High-Speed Steel 6542 (M2), Thread size: M16 X 1.5; Total Length: 102mm/4.02 , Thread Length: 36.4mm/1.43 , can make new threads or re-thread damaged or jammed threads.
- Round Die Material: High Quality Alloy Steel, Thread size: M16 X 1.5; outside diameter (OD): 38mm / 1.49; Thickness: 14mm / 0.55, can process, correct or clean the external threads.
- Suitable for processing through holes or shallow holes on on steel, copper, aluminum, cast iron and other materials. Can be used with manual equipment or special processing consoles, such as drill presses, tapping machines, CNC and milling machines.
- Design: straight flute tap provides rapid downward chip removal for efficient threading, debris rapidly discharged in the tank. No blocking and high efficiency.
- Package Included: 1pc M16 x 1.5mm Thread Tap + 1pc M16 x 1.5mm Thread Die, 1.5mm pitch, right hand.
- See more on Amazon...
Brand: Saipe | Manufacturer: Saipe
See On Amazon #16
Piutouyar Metric Thread Tap, HSS M16 x 1.5mm Metal Thread Tap, Right Hand Threading Tap for Machine
Asin: B0BKFSDCY8
Dimensions: Overall Length:100Mm/3.94"； Thread Length: 32Mm/1.26"; Thread Pitch: 1.5Mm/0.06".
Quality Service - Thank You Very Much For Your Support. Piutouyar Provides 30 Days Return And Exchange Service. Customer 100% Satisfaction Is Our Top Priority. If You Have Any Questions, Please Feel Free To Contact Us And We Will Try Our Best To Help You..
Uses: This High-Speed Steel Thread Tap Is Very Suitable For Tapping, And Can Easily Complete Drilling And Tapping Of Stainless Steel, Iron, Aluminum, Copper, Hard Plastic And Other Materials With Manual Equipment Or Mechanical Equipment Such As Drilling Machines, Tapping Machines, And Cnc Lathes..
Material And Characteristics: The Product Is Made Of High-Speed Steel, Which Is Durable And Not Easy To Wear. The Round Thread Tap Can Quickly Discharge The Sundries Into The Groove To Avoid Blockage And Improve Efficiency..
Features
- What You Will Get: M16 x 1.5 Metric Thread Tap x1
- Material and Characteristics: The product is made of high-speed steel, which is durable and not easy to wear. The round thread tap can quickly discharge the sundries into the groove to avoid blockage and improve efficiency.
- Dimensions: Overall Length:100mm/3.94 Thread Length: 32mm/1.26; Thread Pitch: 1.5mm/0.06
- Uses: This high-speed steel thread tap is very suitable for tapping, and can easily complete drilling and tapping of stainless steel, iron, aluminum, copper, hard plastic and other materials with manual equipment or mechanical equipment such as drilling machines, tapping machines, and CNC lathes.
- QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you have any questions, please feel free to contact us and we will try our best to help you.
- See more on Amazon...
Brand: Piutouyar | Manufacturer: Piutouyar
Weight: 0.20 Pounds
See On Amazon #17
3Pcs Large HSS Titanium Coated Step Drill Bit Set, 1/4" Hex Shank Quick Change High Speed Steel Cone for Plastic, Wood, Metal, Aluminum Hole Drilling (Metric 4-12mm/4-20mm/4-32mm)
Asin: B0CG8Z2TZK
Widely Used: Perfect Step Drill Bits Suitable For Drill Holes In Various Material： Within 3Mm/0.12 Inch (Iron Plate, Copper Plate, Aluminum Plate); Within 5Mm/0.2 Inch (Wood, Pvc Sheet, Insulation Boards). Not Suitable For Hard And Brittle Materials Such As Stainless Steel, Glass, Tile Floors, Walls Etc..
Package Included: 3-Piece Hss Groove Step Drill Bit (4-12/ 4-20/ 4-32Mm ) And One Storage Bag. 1/4" Hex Shaft Drives Are Suitable For All Kinds Of For Home Diy Power Drills..
Set Includes: Bit #1 (5 Steps): 4-12Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm); Bit #2 (9 Steps): 4-20Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm); Bit #3 (15 Steps): 4-32Mm (4Mm, 6Mm, 8Mm, 10Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm, 22Mm, 24Mm, 26Mm, 28Mm,30Mm,32Mm).
Easy Drilling: Two-Flute Design For Smoother Cutting. High Step Design Let You Feel The Stop And Never Drill Bigger In Mistake.
Features
- Material: HSS combined with a titanium coating. Sturdy and durable.
- Easy Drilling: Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake
- Widely Used: Perfect Step Drill Bits suitable for drill holes in various material within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate); within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc.
- Set Includes: Bit #1 (5 steps): 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm); Bit #2 (9 steps): 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm); Bit #3 (15 steps): 4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm,30mm,32mm)
- Package Included: 3-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ) and one storage bag. 1/4 Hex shaft drives are suitable for all kinds of for home DIY power drills.
- See more on Amazon...
Brand: MAYMII·HOME | Manufacturer: MAYMII·HOME
See On Amazon #18
Drill America DWTB16X2 m16 x 2 High Speed Steel Metric 4 Flute Bottoming Hand Tap, DWT Series
Asin: B00FXK5DJ0 | Model: DWTB16X2 | PartNumber: DWTB16X2 | Ean: 0887861072724 | UPC: 887861072724
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #19
ATOPLEE Metric Thread Tap, HSS 6542 Right Hand Thread Tap (M26x1.5)
Asin: B09VC42SSV | Model: 13080030 | PartNumber: 13080030 | Ean: 0650076855495 | UPC: 650076855495
Square Head Size:16X 16Mm (L*W) ..
【Package Included】 1Pcs Metric Right Hand Thread Tap..
【Usage】When Using This Product For Tapping, It Can Be Used With Manual Equipment Or Special Processing Consoles, Such As Tapping Machines, Drill-In-One Bench Drills, Cnc Lathes, Machining Centers, Etc. With This Product, You Can Finish Tapping On Stainless Steel, Iron, Aluminum, Copper, General Steel And Other Materials..
【Size】Shank Diameter:20Mm, Pitch:1.5Mm;Thread Length:37Mm,Total Length:126Mm..
Features
- Material This thread tap is made of HSS 6542, which is stronger and more durable than ordinary taps.
- Size Shank Diameter:20mm, Pitch:1.5mm;Thread Length:37mm,Total Length:126mm.
- Square Head Size:16x 16mm (L*W) .
- Usage When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc. With this product, you can finish tapping on stainless steel, iron, aluminum, copper, general steel and other materials.
- Package Included 1pcs Metric Right hand Thread Tap.
- See more on Amazon...
Brand: ATOPLEE | Manufacturer: ATOPLEE
See On Amazon #20
Owl Tools 16MM Cobalt Drill Bits (3 Pack - 150mm / 6" Length) M35 Cobalt Drill Bits with Storage Case - Perfect Metric Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!
Asin: B0CHN6WM9Q | Ean: 0810147650552 | UPC: 810147650552
Plastic Storage Case Included - Incredibly Tough And Durable Plastic Case. Perfect For Keeping Your Cobalt Drill Bits Neatly Organized And Safe..
Lifetime Guarantee - Here At Owl Tools (Usa Based Company) We Only Care About Your Satisfaction. We Try Our Best To Ensure Each Product Is In Perfect Condition Before You Get It, But If Something Is Not Up To Your Satisfaction, Please Contact Us For A Full Refund Or Replacement..
Cobalt Drill Bits Are The Perfect Drill Bits For Metal - As Well As Other Hard Materials Such As Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, And More!.
M35, Fully Ground, 135° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded For A Precision Drilling Diameter. 135° Split Point Design Makes It Easier To Drill Repeated Holes In Harder Materials..
Features
- 3 PACK OF 16MM COBALT DRILL BITS - 16MM Diameter with a Flute Length of 78mm and Total length of 150mm
- M35, FULLY GROUND, 135 SPLIT POINT - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135 Split Point Design Makes it Easier to Drill Repeated Holes in Harder Materials.
- PLASTIC STORAGE CASE INCLUDED - Incredibly Tough and Durable Plastic Case. Perfect for Keeping Your Cobalt Drill Bits Neatly Organized and Safe.
- COBALT DRILL BITS ARE THE PERFECT DRILL BITS FOR METAL - As well as other hard materials such as Stainless Steel, Hardened Steel, Cast Iron, Bronze, Titanium, and More!
- LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
- See more on Amazon...
Brand: Owl Tools | Manufacturer: Owl Tools
See On Amazon
Looking For Something Else?
Search