EEEkit Rotary Spot Weld Cutter Sets Double Sided 13-pack, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B07GYLDTFM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easily Separation: Spot Weld Cutter Drill Bit For Easily Separate Spot-Welded Panels Without Distorting The Sheet Metal. Separate Spot-Welded Sheet Metal, Panel, Etc, And Cut Small Access Holes..
Application: Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets, F.R.P, Or Other Thin Metal Sheets..
Double-Sided Weld Cutter: This Weld Cutter Is A Double-Sided Rotary Cutter Blade That Separates Spot-Welded Panels More Effectively Than A Panel Cutter. Double-Sided 3/8 Inch Rotary Blade And Hex Shank Fit Most Drills..
Wear Resistance: Made Of High-Speed Steel Material, High Hardness, And Wear-Resistant. The Center Pin On The Bit Is Spring-Loaded. Sharp Double-Sided Blades For High Efficiency..
Features
- SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 13 PCS 3/8 inches spot weld cutter.
- WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency.
- EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes.
- DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills.
- APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEkit
Dimensions: 1.00 x 6.00 x 1.00 inches | Weight: 0.06 pounds
See On Amazon Similar To EEEkit Rotary Spot Weld Cutter
#1
14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B087FS9PR8 | Ean: 0720355262303 | UPC: 720355262303
Easily Separate : There Is A Spring-Loaded Pin In The Center Of These Blades To Guide The Cutter To Grind Through The Spot-Welded Material,Drilling Out Spot-Welds In A Manner That Leaves A Very Clean Hole Without Distorting The Sheet Metal..
Spot Weld Cutter Tool：Easy To Replace The Blades When It Begins To Dull..
Fit For : Sharp Double-Sided Blades For High Efficiency. Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets, F.R.P Or Other Thin Metal Sheets..
Double Sided : Double Sided Rotary Cutter Blade Separates Spot-Welded Panels More Effectively Than A Panel Cutter.When 1 Side Gets Dull You Simply Have To Flip The Bit Around On Its Arbor Assembly..
Features
- Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size.
- Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when 1 side gets dull you simply have to flip the bit around on its arbor assembly.
- Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal.
- Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
- Spot Weld Cutter Tool Easy to replace the blades when it begins to dull.
- See more on Amazon...
Brand: EONLION | Manufacturer: EONLION
Dimensions: 1.06 x 4.13 x 1.96 inches
See On Amazon #2
Spot Weld Cutter, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tool (9-Pack)
Asin: B07FW2ZH52 | Model: 9-Pack | PartNumber: 9-Pack | Ean: 0755101073100 | UPC: 755101073100
Perfect Size - 3/8" Diameter Cutting Blade Is Ideal For Removing Spot Welds.1/4" Standard Size Arbor With Flats To Eliminate Spinning In Chuck (Fits 1/4" And Larger Drills). The Cutter Is Wear Resistance And Smooth Removal Of Scrap During Operation..
Flexible Using- Great Spot Weld Cutter Can Be Used For Iron, Cast Iron, Alloy Steel, Carbon Steel, Die Steel,Die Grinder, Fix Vehicle,Drill Holes,Auto Body Renovations,Etc Anywhere You Think It Can Be Helpful..
Value - Includes 2 Pcs Rotary Spot Drill + 11 Pcs Replacement Cutting Blades+1Pc Spot Weld Drill.
Fast - Quickly Separates Spot-Welded Panels Without Distortion. The Cutting Edge Is Sharper And The Piercing Ability Is Better..
Features
- DURABLE - Double-Sided 3/8" Heavy Duty High Speed Rotary Metal Cutting Blade Made From High-Quality High-Speed Steel.
- FAST - Quickly Separates Spot-Welded Panels Without Distortion. The cutting edge is sharper and the piercing ability is better.
- PERFECT SIZE - 3/8 Diameter Cutting Blade is Ideal for Removing Spot Welds.1/4 Standard Size Arbor with Flats to Eliminate Spinning in Chuck (fits 1/4 and larger drills). The cutter is wear resistance and smooth removal of scrap during operation.
- VALUE - Includes 2 pcs Rotary Spot Drill + 11 pcs Replacement Cutting Blades+1pc Spot Weld Drill
- Flexible Using- Great Spot Weld Cutter can be used for Iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc anywhere you think it can be helpful.
- See more on Amazon...
Brand: Handook | Manufacturer: Handook
Weight: 0.44 Pounds
See On Amazon #3
Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO
Asin: B08L7PLPN3 | Ean: 0788424550294 | UPC: 788424550294
◆【Easy Separation】 The Spot Welding Cutting Machine Drill Bit Can Easily Separate The Spot Welding Plate Without Distorting The Metal Plate. Separate Spot Welding Of Sheet Metal, Panels, Etc., And Cut Out Small Inspection Holes. Also Known As: Spot Weld Drill Bit, Spot Weld Bit, Spot Weld Cutter Drill Bit, Spot Weld Drill Cutter, Spotweld Drill Bits, Spot Weld Cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
◆Providing High Quality And Professional Parts With Great Service.If You Have Any Questions, Please Feel Free To Contact Us By Email For More Information!We Will Solve It For You In The First Time!.
◆【Package Include】：1 X Drill With Cutter,2 X Pilot Pin.,11 X Extra 3/8" Cutters. Also Known As: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover.
◆【Material】: The Preferred Material Is Made Of High-Quality Steel With Excellent Heat Resistance, High Hardness And Wear Resistance. The Drill Center Pin Is Spring Type.The Diameter Of The Cutting Blade Is 3/8 Inch, And The Shank Is A Standard 1/4 Inch Size.With A Flat Shank To Eliminate Rotation In The Chuck..
Features
- Fit for : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates.
- Material : The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck.
- Easy separation The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
- Package Include 1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8 cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8 Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover
- Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!
- See more on Amazon...
Brand: NAKAO | Manufacturer: NAKAO
Dimensions: 0.20 x 2.00 x 1.00 inches | Weight: 2.20 Pounds
See On Amazon #4
Blair - Spotweld Cutter Set 3 3/8In. Cutters Arbor & Pil (11096)
Asin: B002XML5HK | Model: 11096 | PartNumber: 11096 | Ean: 0021112051490, 0632175110965, 0971473118458, 7241870957381, 0031113085622, 0012301857757 | UPC: 031113085622, 012301857757, 632175110965, 021112051490, 971473118458
Fully Equipped With State-Of-The-Art Technology.
Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User.
All Products Have Been Designed With The Professional In Mind.
International Renown For Our Diverse Range Of Award-Winning Products.
Features
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
- See more on Amazon...
Brand: Blair Equipment | Manufacturer: Blair
Dimensions: 1.50 x 8.00 x 6.00 Inches | Weight: 0.10 pounds
See On Amazon #5
EEEkit 15 Pack Rotary Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B09MKHSWK9 | Model: T1B5400-E003511668FBA | PartNumber: T1B5400-E003511668FBA
Easily Separation: Spot Weld Cutter Drill Bit For Easily Separate Spot-Welded Panels Without Distorting The Sheet Metal. Separate Spot-Welded Sheet Metal, Panel, Etc, And Cut Small Access Holes..
Application: Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets, F.R.P, Or Other Thin Metal Sheets..
Double-Sided Weld Cutter: This Weld Cutter Is A Double-Sided Rotary Cutter Blade That Separates Spot-Welded Panels More Effectively Than A Panel Cutter. Double-Sided 3/8 Inch Rotary Blade And Hex Shank Fit Most Drills..
Wear Resistance: Made Of High-Speed Steel Material, High Hardness, And Wear-Resistant. The Center Pin On The Bit Is Spring-Loaded. Sharp Double-Sided Blades For High Efficiency..
Features
- SPOT WELD CUTTER TOOL: It is easy to replace when the electric drill blades begin to dull. The package includes a 15 PCS 3/8 inches spot weld cutter.
- WEAR RESISTANCE: Made of high-speed steel material, high hardness, and wear-resistant. The Center pin on the bit is spring-loaded. Sharp double-sided blades for high efficiency.
- EASILY SEPARATION: Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal. Separate Spot-welded sheet metal, panel, etc, and cut small access holes.
- DOUBLE-SIDED WELD CUTTER: This weld cutter is a double-sided rotary cutter blade that separates spot-welded panels more effectively than a panel cutter. Double-sided 3/8 inch rotary blade and Hex Shank fit most drills.
- APPLICATION: Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P, or other thin metal sheets.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEKit
Dimensions: 0.79 x 3.94 x 1.57 Inches
See On Amazon #6
Spot Weld Cutter Set JESTUOUS 5-pack 3/8 Inch HSS Remover Welding Metal Sheet Hole Drilling Bits for Power Hand Drill Tool
Asin: B092VPW6JY | Model: JES-SWC-5PCS | PartNumber: JES-SWC-5PCS | Ean: 0792966783461 | UPC: 792966783461
3/8 Inch:Fits For 3/8''Handheld Drill Chucks Or Larger Size And The Spring Loaded Needle Helps Guide The Cutting Blades..
High Quality Material:Made Of High-Speed Steel Material, High Hardness And Heat Resistant..
Convenience:Easy To Handle With And Replace,Fast And Quickly Separates Spot-Welded Panels Without Distortion..
Widely Usage:Suitable For Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets,Iron, Cast Iron, Alloy Steel, Carbon Steel Or Other Thin Metal Sheets..
Features
- Includes:5-pack spot weld cutter 3/8 inch heavy duty cutting blades and extra center pin for a long-term usage.
- Widely Usage:Suitable for thin stainless steel sheets, iron sheets, aluminum sheets,iron, cast iron, alloy steel, carbon steel or other thin metal sheets.
- 3/8 Inch:Fits for 3/8''handheld drill chucks or larger size and the spring loaded needle helps guide the cutting blades.
- Convenience:Easy to handle with and replace,fast and quickly separates spot-welded panels without distortion.
- High Quality Material:Made of high-speed steel material, high hardness and heat resistant.
- See more on Amazon...
Brand: JESTUOUS | Manufacturer: Tungsten technology inc
Dimensions: 0.39 x 0.79 x 0.39 inches
See On Amazon #7
Blair - Spotweld Cutter Set 3 3/8In. Cutters Arbor & Pil (11082)
Asin: B000ETZFJI | Model: 11082 | PartNumber: 11082 | Ean: 0632175110828 | UPC: 632175110828
Fully Equipped With State-Of-The-Art Technology.
Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User.
All Products Have Been Designed With The Professional In Mind.
International Renown For Our Diverse Range Of Award-Winning Products.
Features
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
- See more on Amazon...
Brand: Blair Equipment | Manufacturer: Blair
Dimensions: 1.50 x 8.00 x 6.00 inches | Weight: 0.23 Pounds
See On Amazon #8
Wolfride 6mm 8mm Spot Weld Drill Bit HSS CO Spot Welding Cutter Spot Weld Removal Tool (2PCS)
Asin: B09GJX8VW5 | Model: 80042GY0493 | PartNumber: 80042GY0493
Tip Design, Better To Position, Prevent Slipping..
Suitable For Thin Stainless Steel Sheets, Copper Sheets, Aluminum Sheets, Etc..
Great For Removing Welding Spot Or Drilling Metal Sheets..
Made From Hss Co, High Hardness And Durable..
Features
- 2pcs spot weld drill bits, 6mm and 8mm.
- Made from HSS Co, high hardness and durable.
- Tip design, better to position, prevent slipping.
- Great for removing welding spot or drilling metal sheets.
- Suitable for thin stainless steel sheets, copper sheets, aluminum sheets, etc.
- See more on Amazon...
Brand: Wolfride | Manufacturer: Wolfride
See On Amazon #9
Spot Weld Cutter Set 13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades,Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B07XMB89SP | Model: VAGYD | PartNumber: VAGYD | Ean: 0710568515259 | UPC: 710568515259
[Easy To Separate] The Spot Welding Cutter Drill Can Easily Separate The Spot Welding Plate Without Distorting The Metal Plate. The Spot-Welded Panel Or Metal Plate Can Be Perfectly Removed Without Deforming The Metal Or Damaging The Underlying Panel..
[Quality Service] If You Have Any Doubts Or Dissatisfaction After Receiving The Product, Please Contact Us Immediately, And We Will Provide You With A Satisfactory Solution In A Timely Manner!.
[Package Includes]: 1 Drill Bit With Cutter, 2 Guide Pins., 10 X Additional 3/8 "Cutters. Also Known As: Spot Weld Drill Bit, Spot Weld Bit, Spot Weld Cutter Drill Bit, Spot Weld Drill Cutter, Spotweld Drill Bits, Spot Weld Cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
[Material]: The Preferred Material Is High-Quality Steel, Which Has Excellent Heat Resistance, High Hardness, And Wear Resistance. The Blade Diameter Is 3/8 Inch, And The Handle Size Is Standard 1/4 Inch..
Features
- [Suitable]: Sharp double-sided blade, which is more effective in separating spot welded panels than panel cutting machines. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel. Suitable for stainless steel, iron, aluminum, F.R.P, or other metal sheets
- [Material]: The preferred material is high-quality steel, which has excellent heat resistance, high hardness, and wear resistance. The blade diameter is 3/8 inch, and the handle size is standard 1/4 inch.
- [Easy to separate] The spot welding cutter drill can easily separate the spot welding plate without distorting the metal plate. The spot-welded panel or metal plate can be perfectly removed without deforming the metal or damaging the underlying panel.
- [Package includes]: 1 drill bit with cutter, 2 guide pins., 10 x additional 3/8 cutters. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding
- [Quality Service] If you have any doubts or dissatisfaction after receiving the product, please contact us immediately, and we will provide you with a satisfactory solution in a timely manner!
- See more on Amazon...
Brand: VAGYD | Manufacturer: VAGYD
See On Amazon #10
ABN Spot Weld Cutter Drill Bit 3-Piece Set High-Speed Steel HSS Cobalt Titanium Coated Welding Remover Bits Tool Kit
Asin: B078FGZ22H | Model: ABN-8056 | PartNumber: ABN-8056 | Ean: 0688295878056 | UPC: 688295878056
Built To Last: Titanium Coating Offers A Smooth Drilling Experience That Prevents Dulling From Overheating For Extended Performance; We Recommend Using Cutting Lubricant And A Spot Weld Chisel To Extend The Life Of These Drill Bits (Lubricant And Chisel Not Included).
Package Contents: Package Includes (3) Bits And (1) Storage Case For Your Convenience; Length 1-3/4-Inch (45Mm); Sizes: 1/4-Inch (6.5Mm), 5/16-Inch (8Mm), And 3/8-Inch (10Mm).
Easy Storage: Heavy-Duty 3.9” X 3” X 1.1” Inch (9.9Cm X 7.6Cm X 2.8Cm) Aluminum Carrying Case With Internal Foam Tray For Easy Transportation, Safe Storage, And Quick Organization; Foam Tray Includes Printed Size Markings For Simple Identification.
Specially Designed: Unlike Pilot Bits That Drill Through Both Surfaces, These Bits Are Easy To Control While Cutting Without Penetrating The Lower Surface; Non-Slip Special Centering Nib Design With Flat Shaft For Sure Grip.
Features
- EFFORTLESSLY REMOVE SPOT WELDS: Use the ABN Spot Weld Cutter Drill Bit 3-Piece Set High-Speed Steel HSS Cobalt Titanium Coated Welding Remover Bits Tool Kit to drill into harder steel materials and stainless steel; Length of each bit is 1-3/4-inches (45mm); Sizes include 1/4-inch (6.5mm), 5/16-inch (8mm), and 3/8-inch (10mm); Each drill bit has permanently etched size markings for quick identification
- SPECIALLY DESIGNED: Unlike pilot bits that drill through both surfaces, these bits are easy to control while cutting without penetrating the lower surface; Non-slip special centering nib design with flat shaft for sure grip
- BUILT TO LAST: Titanium coating offers a smooth drilling experience that prevents dulling from overheating for extended performance; We recommend using cutting lubricant and a spot weld chisel to extend the life of these drill bits (lubricant and chisel not included)
- EASY STORAGE: Heavy-duty 3.9 x 3 x 1.1 inch (9.9cm x 7.6cm x 2.8cm) aluminum carrying case with internal foam tray for easy transportation, safe storage, and quick organization; Foam tray includes printed size markings for simple identification
- PACKAGE CONTENTS: Package includes (3) bits and (1) storage case for your convenience; Length 1-3/4-inch (45mm); Sizes: 1/4-inch (6.5mm), 5/16-inch (8mm), and 3/8-inch (10mm)
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.20 x 3.90 x 3.25 inches | Weight: 0.26 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #11
S&F STEAD & FAST Spot Weld Cutter Kit, 7 Cutters, 3/8 Shank, Depth of Cut 1/4, Cutting Diameter 5/16-3/4
Asin: B0B71R3BYM | Model: ZXT-HAZ-029 | PartNumber: ZXT-HAZ-029
Assortment Small Annular Cutters With 3/8” Threaded Shank, Cutting Diameter Of 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4", Suitable For Cutting Up To 1/4” Depth.
Sturdy Case Includes Cutter X 7, Arbor X 1, Pilot Pin X 2, Center Punch X 1, Small Washer X 1, Large Washer X 1, Hex Wrench X 1; Keep All Bits Tidy And At Hand.
Applications Spot Face Cutter Can Be Used Not Only For Spot Weld Cutting In Auto Body Panels But Also For General Hole Cutting In Sheet Metal, Piping, Conduit, Electrical, Automotive And Hvac Work..
Fast Cutting And Long Life Premium Spot Weld Cutters Drill 3 Times Faster Than Twist Drill Bits Or Double Sided Cutters And Last Much Longer.
Features
- PREMIUM HSS STEEL Drill bit cutters with thick walls made of super hard M2AL High Speed Steel (HRC 66), designed for wear resistance and superior performance
- FAST CUTTING AND LONG LIFE Premium spot weld cutters drill 3 times faster than twist drill bits or double sided cutters and last much longer
- ASSORTMENT Small annular cutters with 3/8 threaded shank, cutting diameter of 5/16 , 3/8, 7/16 , 1/2, 9/16 , 5/8, 3/4, suitable for cutting up to 1/4 depth
- APPLICATIONS Spot face cutter can be used not only for spot weld cutting in auto body panels but also for general hole cutting in sheet metal, piping, conduit, electrical, automotive and HVAC work.
- STURDY CASE Includes Cutter x 7, Arbor x 1, Pilot pin x 2, Center punch x 1, Small washer x 1, Large washer x 1, Hex wrench x 1; keep all bits tidy and at hand
- See more on Amazon...
Brand: S&F STEAD & FAST | Manufacturer: S&F STEAD & FAST
See On Amazon #12
Blair 13224 3/8" Double End Spotweld Cutter
Asin: B000GTOOC0 | Model: BLR13224 | PartNumber: BLR13224 | Ean: 0632175132240, 0014444922880 | UPC: 632175132240, 014444922880
Package Dimensions : 36.0 L X 3.0 H X 5.0 W (Inches).
Package Weight : 5.17 Pounds.
Made In United States.
Features
- One retractable Pilot and one 3/8" double-end Cutter
- Made in United States
- Package Dimensions : 36.0 L x 3.0 H x 5.0 W (inches)
- Package Weight : 5.17 pounds
- See more on Amazon...
Brand: Blair Equipment | Manufacturer: Blair
Dimensions: 6.00 x 6.00 x 6.00 Inches | Weight: 0.10 Pounds
See On Amazon #13
9 Pieces Spot Weld Cutter, Sheet Metal Hole Cutter, Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool, 3/8 Inch Drill Bit Tools
Asin: B0B7B71XZ3 | Model: H19-T00001FBA | PartNumber: H19-T00001FBA
Durable Long Service Time: The Spot Weld Cutter Is Made Of High Quality Steel Material, Which Promises A Durable Working Time..
Welds Protector: The Product Can Meet Your Needs To Reduce Prying And Damaging To Welds, You Can Use It With Less Worries About The Welds Broken..
Lightweight And Portable : The Professional Design And Reasonable Structure, Make It Easy To Replace And Install, Without Too Much Efforts..
Working Without Damaging Panel: Spot Welded Or Metal Plates Can Be Removed Without Distorting The Metal Or Damaging The Underlying Panel..
Features
- HIGH EFFICIENCY: The high efficiency steel welding drilling tool fittings is designed with double-sided blade, so it works with high efficiency.
- WORKING WITHOUT DAMAGING PANEL: Spot welded or metal plates can be removed without distorting the metal or damaging the underlying panel.
- DURABLE LONG SERVICE TIME: The spot weld cutter is made of high quality steel material, which promises a durable working time.
- LIGHTWEIGHT AND PORTABLE : The professional design and reasonable structure, make it easy to replace and install, without too much efforts.
- WELDS PROTECTOR: The product can meet your needs to reduce prying and damaging to welds, you can use it with less worries about the welds broken.
- See more on Amazon...
Brand: Lpluziyyds | Manufacturer: Lpluziyyds
See On Amazon #14
Spot Weld Cutter Set JESTUOUS 12-pack 3/8 Inch Cutting Diameter HSS Remover Welding Metal Sheet Hole Drilling Bits for Power Hand Drill Tool
Asin: B0BYJ371HB | Model: JES-SWC-12 | PartNumber: JES-SWC-12 | Ean: 0792966783652 | UPC: 792966783652
3/8 Inch Fits For 3/8" Handheld Drill Chucks Or Larger Size And The Spring Loaded Needle Helps Guide The Cutting Blades..
High Quality Material Made Of High-Speed Steel Material, High Hardness And Heat Resistant..
Convenience:Easy To Handle With And Replace,Fast And Quickly Separates Spot-Welded Panels Without Distortion..
Widely Usage Suitable For Spotwelding On Most Vehicle Auto Body Panels,And Thin Stainless Steel Sheets, Iron Sheets, Aluminum Sheets,Iron,Cast Iron,Alloy Steel,Carbon Steel Or Other Thin Metal Sheets..
Features
- INCLUDES 12-pack spot weld cutter 3/8 inch heavy duty cutting blades with 3/8" thread shank for a long-term usage.
- WIDELY USAGE Suitable for spotwelding on most vehicle auto body panels,and thin stainless steel sheets, iron sheets, aluminum sheets,iron,cast iron,alloy steel,carbon steel or other thin metal sheets.
- 3/8 INCH Fits for 3/8 handheld drill chucks or larger size and the spring loaded needle helps guide the cutting blades.
- CONVENIENCE:Easy to handle with and replace,fast and quickly separates spot-welded panels without distortion.
- HIGH QUALITY MATERIAL Made of high-speed steel material, high hardness and heat resistant.
- See more on Amazon...
Brand: JESTUOUS | Manufacturer: Tungsten technology inc
Weight: 0.93 Pounds
See On Amazon #15
9Pcs Spot Weld Cutter Set, 3/8" Double Sided HSS High Speed Steel Hole Removable Spot Weld Drill Bits for Power Drill Spot Welding Power Tool Accessories Twist Drill
Asin: B08SMN61HD | Ean: 9466452588601
【Easily Separate】:Spot Weld Cutter Drill Bit For Easily Separate Spot-Welded Panels Without Distorting The Sheet Metal..
【High-Quality Material】:Spot Weld Cutter Set Is Made Of High Speed Steel In High Standards. High Strength And Hardness, Which Ensure Quickly Separates Spot-Welded Panels Without Distortion. Center Pin On The Bit Is Spring-Loaded..
【Advantage】:Spot Weld Cutter Has Double-Sided Blade, The Product Has High Efficiency.
【Stable】:Drilling Stably, Small Incision Resistance, High Speed, Do Not Breaking The Border. The Item Great For Removing Spot-Welded Panels Or Metal Sheets Without Distorting The Metal Or Damaging The Underlying Panel, Alleviates The Need To Pry And Break Welds..
Features
- Widely Applicable :Double-sided blades with high efficiency. Dedicated for used on iron, cast iron, alloy steel, carbon steel, die steel, die grinder, drill holes, auto body renovations, etc.
- Stable :Drilling stably, small incision resistance, high speed, do not breaking the border. the item great for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel, alleviates the need to pry and break welds.
- Easily Separate :Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal.
- Advantage :Spot Weld Cutter has double-sided blade, the product has high efficiency
- High-quality Material :Spot Weld Cutter Set is made of high speed steel in high standards. High strength and hardness, which ensure quickly separates spot-welded panels without distortion. Center pin on the bit is spring-loaded.
- See more on Amazon...
Brand: Marhynchus | Manufacturer: Marhynchus
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #16
Reppkyh 15-Pack Spot Weld Cutter Sets - Double Sided 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding
Asin: B08QRYC6PP | Model: R1Q-003 | PartNumber: R1Q-003 | Ean: 0192531100370 | UPC: 192531100370
Spot Weld Cutter Tool : Easy To Replace The Blades When It Begins To Dull.
Package : Our Spot Weld Cutter Set Includes: 1 X Cutter Drill With Double Cutter+11 X Extra 3/8 Inch Cutters+2 X Pilot Pins..
High Speed And Stable : Drilling Stably, Small Incision Resistance, High Speed, Do Not Breaking The Border. The Item Great For Removing Spot-Welded Panels Or Metal Sheets Without Distorting The Metal Or Damaging The Underlying Panel, Alleviates The Need To Pry And Break Welds..
High-Quality Material : The Double-Sided Blade Is Made Of Heat Resistant Thicker Steel In High Standards. High Strength And Hardness, Which Ensure Quickly Separates Spot-Welded Panels Without Distortion. Center Pin On The Bit Is Spring-Loaded..
Features
- Widely applicable : The 3/8 inch cutting spot welds remover fits most 1/4 inch drills, arbor with flats to elimi te spinning in chuck. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets.
- High-quality Material : The double-sided blade is made of heat resistant thicker steel in high standards. High strength and hardness, which ensure quickly separates spot-welded panels without distortion. Center pin on the bit is spring-loaded.
- Spot Weld Cutter Tool : Easy to replace the blades when it begins to dull
- High Speed and Stable : Drilling stably, small incision resistance, high speed, do not breaking the border. the item great for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel, alleviates the need to pry and break welds.
- Package : Our Spot Weld Cutter Set includes: 1 x Cutter Drill With Double Cutter+11 x Extra 3/8 inch Cutters+2 x Pilot Pins.
- See more on Amazon...
Brand: Reppkyh | Manufacturer: Reppkyh
See On Amazon #17
Spot Weld Cutter Set, 13 Pieces 3/8" Spot Weld Drill Bits Sheets Metal Hole Cutter Remover Double Sided for Power Drill Spot Welding
Asin: B09LQJ1RKV | Model: HYT0290-0928 | PartNumber: HYT0290-0928 | Ean: 0768492358886 | UPC: 768492358886
【Spot Weld Cutter】 : Sharp Double-Sided Blades, Made Of High Quality Steel, Durable And Wear Resistant. The Perfect Tool Can Remove The Spot-Welded Panel Or Metal Plate Without Distorting The Metal Or Damaging The Panel Below, Thereby Reducing Skid Welding And The Need To Break The Weld..
【Providing Guarantee】：Professional Parts With Great Service. Customer Satisfaction Is Our First Priority. If You Don't Love Our Spot Weld Cutter, We'll Refund Your Purchase.And We Hope Customers To Give Suggestions For Improvement..
【High Efficiency】:3/8" Diameter Cutting Blade. The Cutting Edge Is Sharper And The Piercing Ability Is Better. 1/4" Standard Shank With Flat Surface To Eliminate Rotation In The Chuck (Suitable For 1/4" And Larger Drills). Sharp Saw Tooth Ensures Fast And Smooth Cutting At High Speed..
【Easy To Use】 : Easily Separate Spot Welded Panels Without Twisting Spot Weld Metal Plate From Metal Plates, Panels, Etc. And Cut Small Through Holes. Suitable For Thin Stainless Steel Plate, Iron Plate, Aluminum Plate Or Other Thin Metal Plates..
Features
- What You Get 1 x Spot Weld Drill Bits 1x Spot weld cutter, 2 x Pilot Pin.,9 x Extra 3/8" cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool.
- Easy to Use : Easily separate spot welded panels without twisting spot weld metal plate from metal plates, panels, etc. And cut small through holes. Suitable for thin stainless steel plate, iron plate, aluminum plate or other thin metal plates.
- Spot Weld Cutter : Sharp double-sided blades, Made of high quality steel, durable and wear resistant. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld.
- High efficiency :3/8 diameter cutting blade. The cutting edge is sharper and the piercing ability is better. 1/4 standard shank with flat surface to eliminate rotation in the chuck (suitable for 1/4 and larger drills). Sharp saw tooth ensures fast and smooth cutting at high speed.
- Providing Guarantee Professional parts with great service. Customer Satisfaction is Our First Priority. If You Don't LOVE Our Spot Weld Cutter, We'll Refund Your Purchase.And we hope customers to give suggestions for improvement.
- See more on Amazon...
Brand: Reppkyh | Manufacturer: Reppkyh
See On Amazon #18
Rotary Spot Weld Cutter, Spot Weld Remover High Speed Steel HSS Remover Drill Bits Wood Drill Bit 8mm for Power Drill Spot Welding(5/16")
Asin: B084L5FRXC | Model: Walfrontedzgb32po5-01 | PartNumber: Walfrontedzgb32po5-01 | Ean: 0738603945519 | UPC: 738603945519
The Rotary Spot Welding Cutters Can Easily Separate Spot Welded Panels Without Distorting The Metal Plate..
Wide Range Of Applications, Can Be Applied To Iron, Cast Iron, Alloy Steel, Carbon Steel, Mold Steel, Etc..
Two Sizes Are Available To Meet Your Special Needs 5/16 Inch (8 Mm), 3/8 Inch (9.5 Mm)..
More Practical, Double-Sided 3 / 8-Inch Rotary Blade And Hex Shank, Suitable For Most Drills..
Features
- The spot welding cutter is made of 6542 high-speed steel (sawtooth), with high strength and hardness, and durable.
- More practical, double-sided 3 / 8-inch rotary blade and hex shank, suitable for most drills.
- The rotary spot welding cutters can easily separate spot welded panels without distorting the metal plate.
- Two sizes are available to meet your special needs 5/16 inch (8 mm), 3/8 inch (9.5 mm).
- Wide range of applications, can be applied to iron, cast iron, alloy steel, carbon steel, mold steel, etc.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.07 Pounds
See On Amazon #19
Fafeicy 3Pcs Cobalt Spot Weld Drill Bit Set Kit, Spot Weld Cutter HSS CO Weld Cutter Cutting Accessories, 1/4in 5/16in 3/8in
Asin: B08GS7QG98 | Ean: 8269761942673
Easy To Operate: Hss Co Drill Bit Is Easily To Separate Spot Welded Panels Without Twisting Metal Plates. A Great Choice For You..
Wide Application: Hss Co Drill Bit Has Wide Range Of Uses, Easy To Carry, Fine Workmanship And No Burrs. Bring You A New And Different Using Feeling..
Package: There Includes 3Pcs Drill Bit Of 1/4In 5/16In 3/8In To Meet Different Requirements. Its Quality Is Guaranteed..
Parameter: Length: Approx. 45Mm / 1.8In; Role: Remove Sheet Metal Welds; Size: 1/4In (6.5Mm), 5/16In (8Mm), 3/8In (10Mm)..
Features
- HIGH-QUALITY MATERIAL: Drill Bit is made of HSS CO material, which is reliable to use. You can use it with peace of mind.
- PARAMETER: Length: Approx. 45mm / 1.8in; Role: Remove sheet metal welds; Size: 1/4in (6.5mm), 5/16in (8mm), 3/8in (10mm).
- EASY TO OPERATE: HSS CO Drill Bit is easily to separate spot welded panels without twisting metal plates. A great choice for you.
- PACKAGE: There includes 3pcs drill bit of 1/4in 5/16in 3/8in to meet different requirements. Its quality is guaranteed.
- WIDE APPLICATION: HSS CO Drill Bit has wide range of uses, easy to carry, fine workmanship and no burrs. Bring you a new and different using feeling.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.27 Pounds
See On Amazon #20
Blair - Spot Wld Cutter (11094)
Asin: B0082LFO8C | Model: 11094 | PartNumber: 11094 | Ean: 0971477616363, 0100069431965, 0632175110941 | UPC: 100069431965, 632175110941, 971477616363
Fully Equipped With State-Of-The-Art Technology.
Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User.
All Products Have Been Designed With The Professional In Mind.
International Renown For Our Diverse Range Of Award-Winning Products.
Features
- Leading Manufacturer Of High-Quality Products
- International Renown For Our Diverse Range Of Award-Winning Products
- Fully Equipped With State-Of-The-Art Technology
- All Products Have Been Designed With The Professional In Mind
- Constantly Modernizing Our Powerful Devices To Meet The Demands Of The Modern User
- See more on Amazon...
First Available: 11/28/2015
Brand: Blair Equipment | Manufacturer: Blair
Dimensions: 1.00 x 6.70 x 5.00 inches | Weight: 0.01 Pounds
Warranty: 1 year warranty on material and workmanship
See On Amazon
Looking For Something Else?
Search