Ade Advanced Optics rd3-012 6MOA Red Dot Sight for Handgun
Asin: B07H9HXHHK | Model: rd3-012 | PartNumber: rd3-012 | Ean: 0640978375665 | UPC: 640978375665
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Red Dot Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same Brightness Level Last Time It Was Turned Off.
6 Moa Dot. Come With Protected Cover, Adjustment Wrench, Adjustment Dailing Plate, User Manual And Picatinny Mounting Plate. Additional Mounting Plates For Hunguns Sells Separately.
1.75" Length X1.25" Width X1.15" Height. Shockproof, Fogproof And Waterproof For 30 Minutes Under 4Ft Water.Feature 1 M.O.A Wind Age And Elevation Adjustments With Audible Click.
The Red Dot Is Compatible With Ade Handgun Mounts For Glock Barreta Hk Ups Sw Mp Sig P226 Springfield Ruger Lc9 Lc9s Lc380 Sr9 Sr22 Sr40 Sr45.
Features
- Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery
- The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45
- Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
- 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click
- 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately
- See more on Amazon...
First Available: 09/30/2018
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon Similar To Ade Advanced Optics rd3012 6MOA
#1
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun - Not Red
Asin: B074ZTGXKJ | Model: RD3-006B | PartNumber: RD3-006B | Ean: 0640978398459 | UPC: 640978398459
Since Its Initial Release In 2014, We've Implemented Numerous Improvements To Enhance Its Durability, Ensuring It Can Withstand Recoil While Also Improving Its Ability To Hold Zero. The Front Switch, Battery Housing, And Hardware Have All Been Recently Updated, Reflecting Our Commitment To Continuous Enhancement. This Product Is Proudly Designed In Oregon..
Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Nuwa Pro And Rd3-030 Apollo Fit Optic Cut/Optic Plate That Is Compatible With Shield Rms/Rmsc/Deltapoint Pro Footprint.
Ade Rd3-021C Nuwacc Fits Optic Cut/Optic Plate That Is Compatible With Trijicon Rmrcc Footprint.
If You're Not Seeing A Perfect Round Dot But Instead Observe A Splashed Dot, Half-Moon Shape, Multi-Dot, Or Starburst, There's A High Probability (99%) That You Might Have Astigmatism Without Being Aware Of It. What You Perceive Is Likely A Small Reflection Of The Led Light On The Lens. A Quick And Simple Way To Confirm This Is By Using Your Cellphone To Take A Photo Of The Dot. If The Photo Shows A Circular Dot, You've Essentially Diagnosed Yourself With Astigmatism..
Ade Rd3-006 Huracan,Rd3-009 Crusader,Rd3-012 Delta, Rd3-012 Pro, Rd3-013 Bertrillium ,Rd3-015 Zantitium, Rd3-028 Ares Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint.
Although It's Feasible To Install The Optic On A Handgun Without The Assistance Of A Gunsmith, We Highly Recommend Seeking The Expertise Of A Professional For The Installation Process. It's Essential To Note That Unprofessional Installations, Such As Improper Torque Application, Can Lead To Issues Like Loose Screws, An Inability To Hold Zero, Damage To The Firearm Or Optic, And Even Pose A Risk Of Personal Injury..
Ade Rd3-019 Stingray, Rd3-020 Raptor, Rd3-022 Artemis, Rd3-023 Valkyrie And Rd3-029 Trumpet Fit Optic Cut/Optic Plate/ That Is Compatible With Trijicon Rmr/Sro/Holosun 407C/507C Footprint.
The On/Off Switch For This Sight Is Conveniently Positioned At The Front, Making It Much Easier To Press Compared To Red Dots With Side-Mounted Switches. It Features A 3 Moa Dot Size And Offers 5 Illumination Settings. The Sight Is Fully Adjustable For Windage And Elevation And Can Be Locked Into Place. With Unlimited Eye Relief And Various Illumination Settings, It Is Powered By An Included Lithium Cr2032 Battery..
Features
- This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint Plate/Slide seamlessly.
- The on/off switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.
- Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.
- Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
- ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
- ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
- ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
- ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Dimensions: 2.50 x 4.80 x 2.00 inches | Weight: 0.40 pounds
Warranty: 1 year
See On Amazon #2
Ade Advanced Optics Spike (RD3-018) Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO
Asin: B08JZFNKR8
Ade Spike Red Dot Sight Is Always Powered On With Automatic Brightness. Operates With A Single Cr2032 3V Battery. With Our Advanced Technology The Sight Only Draws Approximate 700 Microampere Powers To Give A Very Long Battery Life. The Brightness Will Turn High And Low Accordingly To The Environment Brightness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Spike's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Spike Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
4Moa, Weight Approximately 17.6 Grames(0.62Oz), (Length)1.6" X (Width).92" X (Height).93".
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.
- 4MOA, Weight approximately 17.6 grames(0.62oz), (Length)1.6 x (Width).92 x (Height).93
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.04 pounds
See On Amazon #3
Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield SD9VE,SD40VE Pistol and Also a Standard Picatinny Mount
Asin: B07T86FZG8
The Pistol Mount Included For Sw Does Not Fit Any Ez, 380, Ez 380 Models, Such As M&P Shield Ez, M&P 380 Shield Ez. Any Shield Or Mp Model That Is Ez Or 380 This Optic Plate Will Not Fit..
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
This Ade Rd3-009 Crusader Have Made Several Improvements Since It's Initial Release In 2016. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
The Pistol Mount Included For Sw Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma, 1911.
Features
- Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, M&P Shield, SD9VE, SD40VE.
- The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911
- The pistol mount included for SW does NOT fit any EZ, 380, EZ 380 models, such as M&P SHIELD EZ, M&P 380 SHIELD EZ. Any Shield or MP model that is EZ or 380 this Optic Plate WILL NOT FIT.
- This ADE RD3-009 Crusader have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 Pounds
See On Amazon #4
Ade Advanced Optics NUWA (RD3-021) Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT/Mete MC9, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO
Asin: B09N52C1L5
Ade Nuwa Is The First(And The Only)Red Dot With Rms/Rmsc Footprint That Has Top Battery Loading System, No Need To Remove The Sight To Change The Battery That Requires Re-Sight In And Waste Ammo. Battery Life Approximately 500-800 Depends On The Brightness Setting. 2Moa Red Dot. Weight Approximately 15.5 Grames(0.55Oz), (Length)1.5" X (Width)..88" X (Height).89".
Ade Nuwa Is Manual Activated By Pressing The On/Off Switch. Press And Hold Switch For 2 Seconds To Turn On/Off, Quick Press To Adjust The Brightness From Low To High..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Nuwa Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Nuwa's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5 x (Width)..88 x (Height).89
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- ADE Nuwa is manual activated by pressing the on/off switch. Press and Hold switch for 2 seconds to turn on/off, quick press to adjust the brightness from low to high.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 pounds
See On Amazon #5
ADE Picatinny Mounting Plate/Adapter/Mount -Compatible with Shield RMS/RMSc/RMSw/SMS,Sig Sauer Romeo Zero, ADE RD3-018 Spike, Nuwa/Apollo, Vortex Defender-CCW,Bushnell RXC-200 Ultra-Compact Red dot.
Asin: B09BDFRS5V | Ean: 0640978407786 | UPC: 640978407786
Designed To Use On Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-030 Apollo, Shield Rms/Rmsc/Rmsw/Sms And Romeo Zero Red Dot Sights..
Does Not Compatible With Holosun 407K/507K, User Must Grind(Lots Of Grinding) To Completely Remove/Flat Out The Two Rear Pin To Fit 407K/507K. Ade Has Is Releasing A New Plate Made Specifically For 407K/507K, Please Search Amazon Item Number/Asin: B09tmpghrl.
Also Compatible With Leupold Delta Point Pro, Jp Enterprises Jpoint And Swampfox Sentinel, Vortex Defender-Ccw, Bushnell Rxc-200 Ultra-Compact Red Dot Sights. Finished In A Matte Black Anodize. Comes With Two Screws.
This Optic Picatinny Mount Made By Ade Is To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR
- This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMS/RMSc/RMSw/SMS and Romeo Zero Red dot sights.
- Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws
- Does NOT compatible with Holosun 407k/507k, user MUST grind(lots of grinding) to completely REMOVE/Flat out the two rear pin to fit 407k/507k. Ade has is releasing a new plate made specifically for 407k/507k, please search amazon item number/Asin: B09TMPGHRL
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #6
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN4QYK1
5 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install. Comes with a ADE RD3-009 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- 5 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.60 pounds
See On Amazon #7
Ade Advanced Optics RD3-006 Green Dot Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN2YZXX
This Green Dot Comes With A Picatinny Mounting Plate Pre-Assembled (Might Be Packaged Separately In The Retail Package, Depends On The Ade Model). Please Use The Allen Wrench Provided To Take Out The 2 Hex Screws(M3x6mm) On The Top Behind The Glass Frame. It Will Disconnect The Red Dot From The Picatinny Mounting Plate. You Will Then Be Able To Attach The Red Dot To A Variety Of Handgun Mounting Plates.
4 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates
- 4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.00 pounds
See On Amazon #8
Ade Advanced Optics RD3-009-2 Red Dot Sights
Asin: B00OJHL5RC | Model: RD3-009-2 | PartNumber: RD3-009-2 | Ean: 0710500199165 | UPC: 710500199165
This Red Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.45 pounds
Warranty: 1 year
See On Amazon #9
Ade Advanced Optics RD3-006A Green Dot Reflex Sight for Handgun
Asin: B071ZW79QJ | Model: rd3-006A | PartNumber: rd3-006A | Ean: 0640978348645 | UPC: 640978348645
However The Front Switch Of The Sight Needs To Trim Down 2Mm Depends On Exact Pistol Model If The Pistol's Pre-Cut Is Very Short...
Ade Rd3 006,Rd3 009,Rd3 012,Rd3 013,Rd3 015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight..
Comes With An Removable Picatinny Mounting Base To Attach To Any Thing With Piatinny Rail. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery.
This Huracan Green Dot Sight Fits Directly To Optics Ready Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided Mount Marked For Doctor/Venom Type Red Dot..
Features
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
- However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short..
- Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
- ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 pounds
See On Amazon #10
Ade Advanced Optics RD3-021-PRO NUWA-PRO Motion Awake Green Reticle Dot Sight for Springfield Hellcat OSP/PRO, Sig P365XL Spectre Comp, Canik TP9 Elite SC/Mete MC9, Mossberg MC2SC, Kimber R7 Mako
Asin: B0B4F9VJCK | Model: RD3-021 PRO | PartNumber: RD3-021 PRO | Ean: 0640978407571 | UPC: 640978407571
With Motion Activated System, While The Nuwa Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. Operates With A Single Cr1632 Battery. 6 Daylight Brightness Setting And 1 Nv Setting. The Night Vision Dot Is Not Visible By The Human Eye, It Is Can Only Be Seen Thought A Night Vision. Battery Life Up To 10000 Hours..
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Nuwa's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With The Adjustment Tool, User Manual, Lens Cloth, Red Dot Cover, Cr1632 Battery, Screws. Parallax-Free & Unlimited Eye Relief. Made Of Aircraft Aluminum In Anodized Black Finish With Multi-Coated Lens. Weight Approximately 15.5 Grames(0.55Oz), (Length)1.5" X (Width)..88" X (Height).89".
Ade Nuwa Pro Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight..
Designed To Fit Canik Elite Tp9 Sc, Canik Mete Sfx, Canik Mete Sft, Mete Mc9, Sig P365x/P365xl/P365xl Spectre Comp, Ruger Max-9, Glock 43X Mos/48 Mos(Not Compatible With Regular Glock 43X/48 That Are Not Mos), Springfield Hellcat Osp, S&W Shield 2.0 Optics Ready, S&W Mp9 Ez, S&W M&P Shield Plus Performance Center, Walther Pps M2 Optics Ready, Girsan Mc1911sc Ultimate Or Any Pistol/Mounting Plate/Slide With Rms/Rmsc Screw Pattern/Footprint..
The Nuwa Pro Has A Fixed 66 Moa Circle With 3 Moa Dot(Cannot Switch Between). It Is One Of The Lightest Weight And Smallest Rms Footprint Green Dot With Full Metal Construction, Top Battery Loading And Motion Awake Function.
Features
- ADE is releasing several Pro Series red dots. This 2023 PRO SERIES for ADE RD3-021(2022-present) Nuwa green dot is called NUWA PRO(RD3-021PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology. This ADE NUWA PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.
- The NUWA PRO has a fixed 66 MOA Circle with 3 MOA Dot(cannot switch between). It is one of the lightest weight and smallest RMS footprint green dot with full metal construction, top battery loading and Motion Awake function
- With Motion Activated System, while the NUWA PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Operates with a single CR1632 battery. 6 daylight brightness setting and 1 NV setting. The Night Vision Dot is not visible by the human eye, it is can only be seen thought a Night Vision. Battery life up to 10000 hours.
- Ade Nuwa PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR1632 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 15.5 grames(0.55oz), (Length)1.5 x (Width)..88 x (Height).89
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 pounds
See On Amazon #11
Ade Advanced Optics HG54R Strobe Laser Sight for Pistol Handgun, Red
Asin: B0716YRB7J | Model: hg54R | PartNumber: hg54R | Ean: 0640978348577 | UPC: 640978348577
Proprietary Mounting Design Provides Two Spring Loaded Pillar To Push To Rail Slot For Rock Solid Zero Movement. Weight: 1.13Oz (Battery Included).Does Not Fits Berreta Due To Extra Wide Trigger Guard..
Controlled By Ambidextrous Switch. It Offers Two Modes: Constant-On And Strobe. This Allows The User To Easily Set Their Mode Based On Personal Need Or Preference.
Operates With One Cr1/3N Batteries(Included). Battery Life: 1 Hours. The Unit Is Quickly And Easily, User-Installed In Moments And Can Be Painlessly Transferred From Firearm To Firearm.
Fit Rail-Equipped Pistols, Rifles And Shotguns. The Laser Sight Fits Onto Virtually Any Firearm With A Modern (M1913 Pica Tinny Or Weaver-Style) Accessory Rail.
Features
- Offers the brightest Red laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
- Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail
- Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included).Does NOT fits Berreta due to extra wide trigger guard.
- Operates with one CR1/3N batteries(included). Battery life: 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm
- Controlled by ambidextrous switch. It offers two modes: constant-on and strobe. This allows the user to easily set their mode based on personal need or preference
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.05 Pounds
See On Amazon #12
Ade Advanced Optics Mini RD3-006x Green Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield SD9VE,SD40VE Pistol and Also a Standard Picatinny Mount
Asin: B07TDQXN6Z
We Have Made Several Improvements For Thi Rd3-006X Since It's Initial Release In 2015. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
3 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included). The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side..
Shock/Fog Proof. It Is Rain Resistant, But Not Waterproof. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
The Pistol Mount Included For Sw Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma, 1911..
Features
- Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield
- The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911.
- We have made several improvements for thi RD3-006X since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- 3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included). The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.13 pounds
See On Amazon #13
ADE Crusader RD3-009 Red Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS) Standard Models and Taurus G3C
Asin: B07TDGJT9Y
This Is Ade's Entry Level Red Dot Origianlly Released In 2014. Over The Years Of Improvement, It Is One Of Best Budget Red Dot For The Quality At This Price Range. We Have Made It More Durable To Withstand Recoil And Improved The Ability To Hold Zero. Designed In Oregon. Starting Jan 2024, This Red Dot Is Shipped With Motion Awake Technology..
5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Dimension: 1.9" Length X1.1" Width X1.0" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Motion Awake Technology. 6 Moa. Powered By A Lithium Cr2032 Battery. Comes With Lens Cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws For Conneting Picactinny Plate, Allen Wrench, Tool, Battery Opener Coin, Battery..
Does Not Fit Glock With Aftermarket Slide With Optic Cut. We Have Made Several Improvements Since It's Initial Release In 2016. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
Features
- This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- This is ADE's entry level red dot origianlly released in 2014. Over the years of improvement, it is one of best budget red dot for the quality at this price range. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon. Starting Jan 2024, this red dot is shipped with Motion Awake Technology.
- Motion Awake Technology. 6 MOA. Powered by a lithium CR2032 battery. Comes with Lens cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws for conneting Picactinny Plate, Allen Wrench, tool, Battery Opener Coin, Battery.
- 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Dimension: 1.9 length x1.1 width x1.0 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 pounds
See On Amazon #14
Ade Advanced Optics Huracan Green Dot Reflex Sight for Handgun - Compatible with Doctor/Venom/Fastfire Red Dot Footprint
Asin: B071JHZXFS | Model: rd3-006A-HURACAN | PartNumber: rd3-006A-HURACAN | Ean: 0640978348652 | UPC: 640978348652
It Is Fits Directly To "Optics Ready" Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided #1 Mount, However The Front Switch Of The Sight Needs To Trim Down 2Mm..
Ade Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds.Any Plate Made For Those Brands Also Fits This Sight.Rd3-011 Only Fits Trijicon Ftprt.
3 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail..
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.This Green Dot Comes With A Picatinny Mounting Base. Other Handgun Mounting Plates Are Not Included..
Features
- We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.
- It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
- 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
- ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 pounds
Warranty: 1 year manufacturer
See On Amazon #15
Ade Advanced Optics HG54G-1 Universal Laser Sight, Green
Asin: B072FHZSW6 | Model: hg54G-1 | PartNumber: hg54G-1 | Ean: 0640978348560 | UPC: 640978348560
Proprietary Mounting Design Provides Two Spring Loaded Pillar To Push To Rail Slot For Rock Solid Zero Movement. Weight: 1.13Oz (Battery Included). Does Not Fits Berreta Due To Ultra Wide Trigger Guard..
Controlled By Ambidextrous Switch. It Offers Two Modes: Constant-On And Strobe. This Allows The User To Easily Set Their Mode Based On Personal Need Or Preference.
Operates With One Cr1/3N Batteries(Included). Battery Life: 1 Hours. The Unit Is Quickly And Easily, User-Installed In Moments And Can Be Painlessly Transferred From Firearm To Firearm.
Fit Rail-Equipped Pistols, Rifles And Shotguns. The Laser Sight Fits Onto Virtually Any Firearm With A Modern (M1913 Pica Tinny Or Weaver-Style) Accessory Rail.
Features
- Offers the brightest Green laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
- Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail
- Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included). Does NOT fits Berreta due to Ultra WIDE trigger guard.
- Operates with one CR1/3N batteries(included). Battery life: 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm
- Controlled by ambidextrous switch. It offers two modes: constant-on and strobe. This allows the user to easily set their mode based on personal need or preference
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.12 Pounds
See On Amazon #16
Ade NUWA 2MOA Red Dot for RMS/RMSC Footprint Optics Ready Pistol Such as Canik TP9 Elite SC, Mete SFT, Sig Sauer P365XL/P365X,Ruger Max-9,Glock 43 MOS, Springfield Hellcat OSP/PRO
Asin: B09N4ZL7YS
Ade Nuwa Is The First(And The Only)Red Dot With Rms/Rmsc Footprint That Has Top Battery Loading System, No Need To Remove The Sight To Change The Battery That Requires Re-Sight In And Waste Ammo. Battery Life Approximately 500-800 Depends On The Brightness Setting..
Ade Does Not Know The Screw Spec Every Pistol Manufacture Used For Their Screw Hole. Please Ask The Pistol Manufacture What Screw Specs They Used On The Hole And Ask Them To Provide The Screw. If You Can’T Get The Screw To Work Properly, We Recommend Going To A Local Hardware Store Such As Ace Hardware To Get The Right Size..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Nuwa's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
For Non-Optics Ready Pistols That Need To Use An Optic Plate/Adapter To Replace The Pistol Manufacturer Equipped Rear Sight, Ade Nuwa's Rear White Dot Will Act As A Pistol Factory Original Rear Sight For Co-Witness..
Comes With Screws For Several Optics Ready Handguns. Does Not Comes With Any Mounting Plate Such As Picatinny Mount Or Plate Made For A Specific Handgun..
Ade Nuwa Created An Iron Sight Curve At The End Of The Body, And Also Added Two White Dots On The Curve. For The Rear Of Part Of The Red Dot To Become A Back Up Iron Sight. With The Ultra Short Design, The Red Dot Provides A Distance/Gap On Some Full Size Optics Ready Pistols, To Give Enough Distance To Be A Co-Witness Back Up Sight, In Addition To The Led Dot And Pistol Equipped Iron Sight.
2Moa Red Dot. Weight Approximately 15.5 Grames(0.55Oz), (Length)1.5" X (Width)..88" X (Height).89".
Comes With 3 Pairs Of Screws For Sig P365xl/X, Springfield Hellcat Osp And Canik Tp9 Elite Sc Only. The Provided Screws Might Not Work With Every Compatible Pistol Listed. Ade Makes The Red Dot To Accept The Industrial Standard Footprint. The Pistol Manufacturer Makes The Optic Cut/Slide For The Same Footprint, But They Have Their Own Opinions To Decide Which Type Screws That The Screw Holes Take..
Hard Coated Aircraft Aluminum And Multi-Coated Glass. Not Plastic Body With Polymer Lens..
Features
- Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, Mossberg MC2SC, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
- Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.
- ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.
- 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5 x (Width)..88 x (Height).89
- Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.
- Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.
- Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.
- ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 pounds
See On Amazon #17
Ade Advanced Optics Huracan Green Dot Micro Sight for Handgun with Doctor Footprint- FDE/TAN Body Color
Asin: B09GTLNV2Q
4 Moa. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Comes With Cr2032battery, Protective Cover, M3x6mm Screws For Connecting To The Provided Picatinny Plate, Picatinny Plate, Lens Cloth, Wheel Dial Reference Tool, Allen Wrench, Screw Driver, Anti-Flickering Robber Shim..
While It Is Possible To Install The Optic To Handgun Without The Use Of A Gunsmith, We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
It Is Fits Directly To "Optics Ready" Pistols That Does Not Need To Remove Rear Sight Such As Glock Mos, Springfield Osp. It Also Fits Canik Using Canik Provided #1 Mount, However The Front Switch Of The Sight Needs To Trim Down 2Mm..
Ade Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Venom, Fastfire,Meopta,Docter,Insight,.Any Plate Made For Those Brands Also Fits This Sight.Rd3-018 Only Fits Rms/Rmsc Footprint. Rd3-019,Rd3-020,Rd3-023 Fits Rmr Footprint.
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
This Ade Rd3-006B Green Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates(Sold Separately) That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp, Taurus Toro Using Pistol Manufacturer Provided Optic Mounting Plate(Sold Separately)..
Features
- This FDE/TAN body color Green Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADE s popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADE s FDE color will not 100% match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter.
- This ADE RD3-006B GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY).
- 4 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm.
- ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Venom, Fastfire,Meopta,Docter,Insight,.Any Plate made for those brands also fits this sight.RD3-018 only Fits RMS/RMSC footprint. RD3-019,RD3-020,RD3-023 fits RMR footprint
- Comes with CR2032battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim.
- While it is possible to install the optic to handgun without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 Pounds
See On Amazon #18
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN36YZS
4 Moa. Top Load System, No Need To Remove The Sight To Change The Battery. Red Dot Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same Brightness Level Last Time It Was Turned Off.
1.75" Length X1.25" Width X1.15" Height. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Comes with a ADE RD3-013 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- 4 MOA. Top load system, no need to remove the sight to change the battery. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
- 1.75 length x1.25 width x1.15 height. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #19
Ade Advanced Optics RD3-002 Compact Red Dot Sight with Integral Weaver-Picatinny Mount
Asin: B00BF6PNQE | Ean: 0717029486134 | UPC: 717029486134
Unlimited Eye Relief, 2 Moa Red Dot, Polished/Coated Lenses, Parallax Free. Anodized Aluminum Body. Led (Light Emitting Diode).
Fully Multi-Coated: Multiple Anti-Reflective Coatings On All Air-To-Glass Surfaces Increase Light. Rd3-002 Is Not Recommended For Heavy Recoil Firearm..
Manual Power Switch At Rear End. Off/Low/High. Only Weight 1.9Oz With Battery Installed..
The Build-In Picatinny Mount Can Not Be Removed And Replace With A Handgun Mounting Plate. For Red Dot Sight Made To Attach Pistol Mounting Plate Such As Optics Ready Pistols, Or Mounting Plates To Replace Rear Sight, Please See Ade’S Other Models Such As Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015.
Features
- ADE Rd3-002 red dot is the entry level red dot that comes with a built-in/non removeable picatinny base. It can only be mounted on the pistols that has a picatinny rail on top. It does NOT works with pistols that does NOT has a picatinny rail on top.
- The Build-in picatinny mount CAN NOT be removed and replace with a handgun mounting plate. For red dot sight made to attach pistol mounting plate such as Optics Ready pistols, or mounting plates to replace rear sight, please see ADE s other models such as RD3-006,RD3-009,RD3-012,RD3-013,RD3-015
- Unlimited Eye Relief, 2 MOA Red Dot, Polished/Coated lenses, Parallax Free. ANODIZED ALUMINUM BODY. LED (LIGHT EMITTING DIODE)
- Manual power switch at rear end. Off/Low/High. Only weight 1.9oz with battery installed.
- Fully Multi-Coated: Multiple anti-reflective coatings on all air-to-glass surfaces increase light. RD3-002 is Not recommended for heavy recoil firearm.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.12 pounds
Warranty: 1 year
See On Amazon #20
Ade Advanced Optics Python Green Dot Reflex Sight for Handgun - Compatible with Doctor Footprint
Asin: B074ZVCTXB | Model: rd3-006x-1 | PartNumber: rd3-006x-1 | Ean: 0640978398466 | UPC: 640978398466
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture.
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Powered By A Lithium Cr2032 Battery(Included).
The On/Off Switch Is Located At The Front Of The Sight, It Is So Much Easier To Press Than The Red Dots Has The Switches On The Side. 3 Moa. 5 Illumination Settings.
Features
- The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System
- The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings
- Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.40 pounds
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search