2 Way Beer Splitter, 1/4" Barbed Fitting Beer CO2 Air Gas Distribution Manifold, Draft Beer Kegerator Splitter for Home Brew, Beer Gas Distributor
Asin: B07HC8BX16 | Ean: 0792117060724 | UPC: 792117060724
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Efficient And Reliable: The Built-In Check Valve In This 2-Way Beer Splitter Serves As A Protective Measure, Ensuring The Prevention Of Gas Backflow And Safeguarding Your Shunt..
Precise Pressure Control: Thanks To The Innovative One-Way Valve Mechanism, The Pressure Drop Between The Valves In These Manifolds Is Approximately 2 Psi, Enabling You To Set The Pressure On The Regulator To A Precise 2 Psi Above The Required Pressure In The Keg, For Optimal Beer Dispensing..
Versatile Gas Distribution: Able To Run Multiple Lines From A Single Co2 Source, This Beer Splitter Allows You To Efficiently Split The Gas Supply Into Multiple Lines, With Each Line Equipped With Its Own Shutoff Valve For Added Convenience And Control..
Easy Installation: With A Convenient 2-Point Screw Hole On The Top, This 1/4" Barbed Beer Splitter Can Be Effortlessly Installed Onto Other Equipment, Providing A Seamless Connection..
Features
- Quality Craftsmanship: This 2-way beer splitter is skillfully crafted using a combination of aluminum, brass, and stainless steel materials, ensuring exceptional durability and longevity.
- Easy Installation: With a convenient 2-point screw hole on the top, this 1/4 barbed beer splitter can be effortlessly installed onto other equipment, providing a seamless connection.
- Efficient and Reliable: The built-in check valve in this 2-way beer splitter serves as a protective measure, ensuring the prevention of gas backflow and safeguarding your shunt.
- Versatile Gas Distribution: Able to run multiple lines from a single CO2 source, this beer splitter allows you to efficiently split the gas supply into multiple lines, with each line equipped with its own shutoff valve for added convenience and control.
- Precise Pressure Control: Thanks to the innovative one-way valve mechanism, the pressure drop between the valves in these manifolds is approximately 2 psi, enabling you to set the pressure on the regulator to a precise 2 psi above the required pressure in the keg, for optimal beer dispensing.
- See more on Amazon...
Brand: Aramox | Manufacturer: Aramox
Dimensions: 3.94 x 11.81 x 1.97 inches | Weight: 0.71 pounds
See On Amazon Similar To 2 Way Beer Splitter 1
#1
Draft Top LIFT Beer Can Opener - Soda Can Opener - Topless Can Opener - Can Cutter Top Remover - Handheld Safety Manual Can Opener, Smooth Edge Effortless Rip and Sip Opener, Pulls the Top Off
Asin: B0BCHBB39B | Model: 00001 | PartNumber: 00001 | Ean: 0860008396945 | UPC: 860008396945
Rip And Sip:The Draft Top Lift Is The Versatile Bar Tool That Works On Domestic, Imported, And Craft Beers, Soda, Energy Drinks, Canned Wine And Cocktails, Iced Coffee, And Much More. Its Patented Design Removes The Top Of Most 12 To 16 Oz Aluminum Cans Quickly And With Ease..
...4. Release The Handle And And Pull The Draft Top Lift Off The Can. If The Lid Isn’T Easily Removed, Repeat Steps 2-3. Do Not Remove The Lid From The Can With Fingers 5. Push The Tab Off The Draft Top Lift Through The Whole In The Cover. 6. Enjoy Drinking Topless!.
Portable Topless Can Opener: Compact And Portable, Take Draft Top Lift Wherever You Go! Parties, Camping, Travel, Work, Open Your Friends And Family's Beverages So They Enjoy The Full Flavor Of Their Canned Drink Like Never Before..
Instructions: 1. Align The Tab On The Can With The Opening In The Center Of The Draft Top Lift. Then Place The Tool Down On The Can And Twist Counter-Clockwise To Lock The Tab On The Lip Of The Tool. 2. Squeeze The Handles And Grip The Bottom Of The Can Where It Is Most Firm. 3. Rotate The Can Counter-Clockwise For At Least 360 Degrees Until The Can Top Stops Rotating..
Safety First: Draft Top Lift Opens Cans Quick And Clean, Leaving A Smooth Edge So You Can Enjoy Your Beverage Without Worrying About Sharp Edges Or Aluminum Slivers. Easy To Use And Even Easier To Enjoy!.
Updated Design: The Latest Draft Top Design Features Improved Gripped Spring-Loaded Handles That Are Left/Right Friendly And Removes The Top Of The Can To Keep Fingers Liquid-Free. This Update To The Original Topless Can Opener Serves Up A Smooth Performance As Your Favorite Can Opener Bar Tool!.
Features
- DRAFT TOP LIFT: The Draft Top LIFT grabs and removes the lid from the can! No more pushing down on the lid or removing it with your fingers. Use as a beer can opener or soda can opener, this can top remover is from the one and only Draft Top!
- UPDATED DESIGN: The latest Draft Top design features improved gripped spring-loaded handles that are left/right friendly and removes the top of the can to keep fingers liquid-free. This update to the original topless can opener serves up a smooth performance as your favorite can opener bar tool!
- RIP AND SIP:The Draft Top LIFT is the versatile bar tool that works on domestic, imported, and craft beers, soda, energy drinks, canned wine and cocktails, iced coffee, and much more. Its patented design removes the top of most 12 to 16 oz aluminum cans quickly and with ease.
- SAFETY FIRST: Draft Top LIFT opens cans quick and clean, leaving a smooth edge so you can enjoy your beverage without worrying about sharp edges or aluminum slivers. Easy to use and even easier to enjoy!
- PORTABLE TOPLESS CAN OPENER: Compact and portable, take Draft Top LIFT wherever you go! Parties, camping, travel, work, open your friends and family's beverages so they enjoy the full flavor of their canned drink like never before.
- INSTRUCTIONS: 1. Align the tab on the can with the opening in the center of the Draft Top LIFT. Then place the tool down on the can and twist counter-clockwise to lock the tab on the lip of the tool. 2. Squeeze the handles and grip the bottom of the can where it is most firm. 3. Rotate the can counter-clockwise for at least 360 degrees until the can top stops rotating.
- ...4. Release the handle and and pull the Draft Top LIFT off the can. If the lid isn t easily removed, repeat steps 2-3. Do not remove the lid from the can with fingers 5. Push the tab off the Draft Top LIFT through the whole in the cover. 6. Enjoy Drinking Topless!
- See more on Amazon...
Brand: Draft Top | Manufacturer: Draft Top
Dimensions: 11.02 x 19.69 x 19.69 inches
See On Amazon #2
Draft Top LIFT - Ghost Version - Beer Can Opener - Soda Can Opener - Topless Can Opener - Can Cutter Top Remover - Handheld Safety Manual Can Opener, Smooth Edge Effortless Opener, Pulls the Top Off
Asin: B0C545GNQR | Model: DTL-402-GW | PartNumber: DTL-402-GW
Rip And Sip:The Draft Top Lift Is The Versatile Bar Tool That Works On Domestic, Imported, And Craft Beers, Soda, Energy Drinks, Canned Wine And Cocktails, Iced Coffee, And Much More. Its Patented Design Removes The Top Of Most 12 To 16 Oz Aluminum Cans Quickly And With Ease..
Instructions Continued: ...4. Release The Handle And And Pull The Draft Top Lift Off The Can. If The Lid Isn’T Easily Removed, Repeat Steps 2-3. Do Not Remove The Lid From The Can With Fingers 5. Push The Tab Off The Draft Top Lift Through The Whole In The Cover. 6. Enjoy Drinking Topless!.
Portable Topless Can Opener: Compact And Portable, Take Draft Top Lift Wherever You Go! Parties, Camping, Travel, Work, Open Your Friends And Family's Beverages So They Enjoy The Full Flavor Of Their Canned Drink Like Never Before..
Instructions: 1. Align The Tab On The Can With The Opening In The Center Of The Draft Top Lift. Then Place The Tool Down On The Can And Twist Counter-Clockwise To Lock The Tab On The Lip Of The Tool. 2. Squeeze The Handles And Grip The Bottom Of The Can Where It Is Most Firm. 3. Rotate The Can Counter-Clockwise For At Least 360 Degrees Until The Can Top Stops Rotating..
Safety First: Draft Top Lift Opens Cans Quick And Clean, Leaving A Smooth Edge So You Can Enjoy Your Beverage Without Worrying About Sharp Edges Or Aluminum Slivers. Easy To Use And Even Easier To Enjoy!.
Updated Design: The Latest Draft Top Design Features Improved Gripped Spring-Loaded Handles That Are Left/Right Friendly And Removes The Top Of The Can To Keep Fingers Liquid-Free. This Update To The Original Topless Can Opener Serves Up A Smooth Performance As Your Favorite Can Opener Bar Tool!.
Features
- DRAFT TOP LIFT: The Draft Top LIFT grabs and removes the lid from the can! No more pushing down on the lid or removing it with your fingers. Use as a beer can opener or soda can opener, this can top remover is from the one and only Draft Top!
- UPDATED DESIGN: The latest Draft Top design features improved gripped spring-loaded handles that are left/right friendly and removes the top of the can to keep fingers liquid-free. This update to the original topless can opener serves up a smooth performance as your favorite can opener bar tool!
- RIP AND SIP:The Draft Top LIFT is the versatile bar tool that works on domestic, imported, and craft beers, soda, energy drinks, canned wine and cocktails, iced coffee, and much more. Its patented design removes the top of most 12 to 16 oz aluminum cans quickly and with ease.
- SAFETY FIRST: Draft Top LIFT opens cans quick and clean, leaving a smooth edge so you can enjoy your beverage without worrying about sharp edges or aluminum slivers. Easy to use and even easier to enjoy!
- PORTABLE TOPLESS CAN OPENER: Compact and portable, take Draft Top LIFT wherever you go! Parties, camping, travel, work, open your friends and family's beverages so they enjoy the full flavor of their canned drink like never before.
- INSTRUCTIONS: 1. Align the tab on the can with the opening in the center of the Draft Top LIFT. Then place the tool down on the can and twist counter-clockwise to lock the tab on the lip of the tool. 2. Squeeze the handles and grip the bottom of the can where it is most firm. 3. Rotate the can counter-clockwise for at least 360 degrees until the can top stops rotating.
- INSTRUCTIONS CONTINUED: ...4. Release the handle and and pull the Draft Top LIFT off the can. If the lid isn t easily removed, repeat steps 2-3. Do not remove the lid from the can with fingers 5. Push the tab off the Draft Top LIFT through the whole in the cover. 6. Enjoy Drinking Topless!
- See more on Amazon...
Brand: Draft Top | Manufacturer: Draft Top, Inc.
Weight: 0.20 pounds
See On Amazon #3
FERRODAY Kegerator Tower Dual Faucet Beer Tower Double Tap Beer Tower Dispenser Beer Tap Kegerator Parts Stainless Steel Tower Brass Faucet Stainless Core Pre-assembled Lines 3" Keg Tower Beer Keg Tap
Asin: B0933C9KRL
[Safe & Strong Material & Shiny Surface]: High-Quality Material Long-Last Beer Tap Tower For Homebrew. Rustproof Stainless Steel Column, Safe For Beverage Beer Tubing, Solid Brass Faucet With Stainless Steel Core, Stainless Steel Screws, And Springs For Longer Service. The Surface Of The Beer Tower And Beer Faucet Are Both Fine Processed For Better Wear Resistance..
[Improved Self-Closing Springs & Keep Improving]: The Package Includes 2 Springs For Self-Closing Tap Installation. The Spring Is So Strong That You May Need A Hand For Installation. A Self-Closing Tap Is The End Of Drippings. Please Let Us Know If There Are Any Problems, We Will Try Our Best To Serve You (Lifetime Technical Support)..
[Few Minutes For Easy Installation Convenient Kit]: Pre-Assembled Faucet Shanks And Beer Lines To Save You Time. 1. Install This On A Bar Counter: Drill Holes On The Countertop For Tubing And Screws, Place The Gasket, Pass The Tubing Through The Hole, Use Screws To Fix The Tower, And Install The Faucet. 2. Install On A Kegerator Would Be Easier: Use The M5/M6 Screws To Fix The Tower Directly, No Drills Are Needed..
[Contents Everything You Need For A Beer Tower]: Comes With 1 Stainless Steel Column, 2 Brass Faucets, 2 Of 5 Feet 3/16" I.D. Tubing, 1 Beer Tower Gasket, 4 Sets Of M5 Screws And Nuts, 2 Clamps, 2 Beer Faucet Springs, 2 Beer Faucet Soothers, 1 Beer Tap Wrench, And 1 Cleaning Brush. A Complete Beer Dispenser Tower..
Features
- [Solid Construction Every Part for No Leak & No Loose]: Stainless Steel Draft Beer Tower with standard threads for faucet installation, further fix with faucet wrench, no leaks & no loose. Popular for indoor/ outdoor family gatherings or commercial applications like bars, hotels, restaurants, etc.
- [Contents Everything You Need For A Beer Tower]: Comes with 1 stainless steel column, 2 brass faucets, 2 of 5 feet 3/16 I.D. tubing, 1 beer tower gasket, 4 sets of M5 screws and nuts, 2 clamps, 2 beer faucet springs, 2 beer faucet soothers, 1 beer tap wrench, and 1 cleaning brush. A complete beer dispenser tower.
- [Safe & Strong Material & Shiny Surface]: High-quality material long-last beer tap tower for homebrew. Rustproof stainless steel column, safe for beverage beer tubing, solid brass faucet with stainless steel core, stainless steel screws, and springs for longer service. The surface of the beer tower and beer faucet are both fine processed for better wear resistance.
- [Few Minutes for Easy Installation Convenient Kit]: Pre-assembled faucet shanks and beer lines to save you time. 1. install this on a bar counter: drill holes on the countertop for tubing and screws, place the gasket, pass the tubing through the hole, use screws to fix the tower, and install the faucet. 2. Install on a kegerator would be easier: use the m5/m6 screws to fix the tower directly, no drills are needed.
- [Improved Self-closing Springs & Keep Improving]: The package includes 2 springs for self-closing tap installation. The spring is so strong that you may need a hand for installation. A self-closing tap is the end of drippings. Please let us know if there are any problems, we will try our best to serve you (Lifetime technical support).
- See more on Amazon...
Brand: Ferroday | Manufacturer: FERRODAY
See On Amazon #4
MRbrew Gas Manifold, CO2 Gas Distributor, 5/16'' Barb Fitting Beer Kegerator Splitter, 2-Way Air Distributor with Integrated Check Valves & Hose Clamps
Asin: B08F7GDYTW
【Quality Anti-Rust Material】The Beer Kegerator Splitter Is Seriously Assembled With Excellent Quality Parts And Has Great Quality Control. It Is Made Of Quality Aluminum, Which Is Strongly Against Rust And Corrosion, Easy To Clean And Will Last For Long..
【100% Lifelong Issues Solving For You】Each Mrbrew Co2 Manifold Is Backed By Unbeatable, Reliable, Trusted Product Quality, We Will Unconditionally Solve Your Problems If You Are Not Satisfied!.
【Indispensable Tool To Build A Strong Keg System】This Air Distributor Can Let You Carbonate 2 Kegs At The Exact Same Pressure Setting With A Regulator. But It Can Not Carbonate Different Beers Simultaneously That Require Different Carbonation Pressures Setting!.
【Anti-Backflow & Excellent Sealing】This Co2 Distributor Has A Shut Off Valve On 2 Outputs Individually, Can Control Each Outputs Individually. Each Output Has A Built-In Check Valve, Which Will Not Get Backflow Into The Gas Line If Hooking Up An Over- Or Under-Pressurized Keg. The Sealant Is Strong On The Connection To Prevent Leaks Perfectly..
Features
- LOW COST CONNECTING EXTENSION The gas manifold is designed with two 5/16 barb fitting outputs, which allows splitting co2 gas line from 1 output to 2 outputs to brewing keg, no need of high cost multi-connection regulator!
- ANTI-BACKFLOW & EXCELLENT SEALING This CO2 Distributor has a shut off valve on 2 outputs individually, can control each outputs individually. Each output has a built-in check valve, which will not get backflow into the gas line if hooking up an over- or under-pressurized keg. The sealant is strong on the connection to prevent leaks perfectly.
- QUALITY ANTI-RUST MATERIAL The beer kegerator splitter is seriously assembled with excellent quality parts and has great quality control. It is made of quality aluminum, which is strongly against rust and corrosion, easy to clean and will last for long.
- INDISPENSABLE TOOL TO BUILD A STRONG KEG SYSTEM This air distributor can let you carbonate 2 kegs at the exact same pressure setting with a regulator. But it can not carbonate different beers simultaneously that require different carbonation pressures setting!
- 100% LIFELONG ISSUES SOLVING FOR YOU Each MRbrew co2 manifold is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!
- See more on Amazon...
Brand: MRbrew
See On Amazon #5
Metaland Brass 3/8" Hose Barb 3 Way Wye Y Shape Barbed Splitter Fitting Splicer for Water Fuel Air
Asin: B08FTJ1B16 | Model: ml-00220-byb | PartNumber: ml-00220-byb | Ean: 0779675775314 | UPC: 779675775314
√【Quantity】1Pcs 3/8" Brass Y Barbed Fitting, 3Pcs Hose Clamps..
√【Usage】Hose Fittings Are Used In Systems Such As Beer Brewing, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
√【Working Temperature&Pressure】Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
√【Size】3/8"Barb X 3/8"Barb X 3/8"Barb, Suitable For 3/8"Id Tubing..
Features
- Material Made of solid brass, high quality, can work in high temperatures and pressure.
- Size 3/8Barb x 3/8Barb x 3/8Barb, suitable for 3/8ID tubing.
- Quantity 1PCS 3/8 brass y barbed fitting, 3PCS hose clamps.
- Working Temperature&Pressure Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- Usage Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- See more on Amazon...
Brand: Metaland | Manufacturer: N/P
Weight: 0.10 pounds
See On Amazon #6
Beduan Stainless Steel 1/4" Hose Barb, 3 Way Tee T Shape Barbed Co2 Splitter Fitting (Pack of 2)
Asin: B07QK7L1T3 | Model: 1yf-00642-thb | PartNumber: 1yf-00642-thb | Ean: 0020064544425 | UPC: 020064544425
Fitting Connects To Hose On All Ends..
Hose Fittings Are Used In Systems Such As Beer Brewing, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
Barbed Fitting Creates A Tight Seal On Flexible And Semi-Rigid Hose When Used With A Hose Clamp Or Crimp Sleeve Or Ferrule (Sold Separately)..
Size: 1/4”Barb X 1/4”Barb X 1/4”Barb – 6Mm Barb X 6Mm Barb X 6Mm Barb..
Features
- Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability.
- Size: 1/4 Barb x 1/4 Barb x 1/4 Barb 6mm Barb x 6mm Barb x 6mm Barb.
- Fitting connects to hose on all ends.
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
- Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- See more on Amazon...
Brand: beduan | Manufacturer: beduan
Weight: 0.00 pounds
See On Amazon #7
VEVOR Beer Kegerator, Dual Tap Draft Beer Dispenser, Full Size Keg Refrigerator With Shelves, CO2 Cylinder, Drip Tray & Rail, 32 F- 50 F Temperature Control, Holds 1/6, 1/4, 1/2 Barrels, 152L,Black
Asin: B0C3V1PN9S | Model: BF152-2 | PartNumber: BF152-2 | Ean: 0840349903989 | UPC: 840349903989
Set The Right Temperature: The Keg Refrigerator Has A Knob That Lets You Easily Adjust The Inner Temperature From 32 To 50℉. This Allows You To Chill Your Beer To Your Preferred Temperature. Plus, If There Is A Power Outage, The Refrigerator Will Automatically Restore The Temperature You Set Once Power Is Restored..
Everything You Deserve: Installing Our Beer Tap Kegerator Is A Breeze. It Comes With All The Necessary Accessories, Including A Dual Tap Beer Tower, A Beer Line, A Co₂ Tank (Empty), A Tank Bracket, And An Installation Kit. We Also Provide Hose Clamps And Gaskets To Prevent Leaks. So, There's No Need To Worry About A Thing!.
Designed With You In Mind: Our Kegerator Fridge Comes With Four Wheels, Making It Easy To Move Around. You Can Lock The Two Front Wheels To Prevent It From Sliding. The Drip Tray Catches Spills And Keeps Things Clean. Plus, The Stainless Steel Guard Rail Provides Extra Safety..
Spacious And Reliable: We Offer An External Bracket For The Co₂ Tank, Which Helps Save Space Inside The Kegerator. The Kegerator Itself Is Spacious Enough To Accommodate Beer Barrels Of Varying Sizes, Including Us-Standard Full-Size, Quarter, And Sixth Barrels. Plus, There Are Two Additional Shelves Provided, Which Allow You To Use The Kegerator As A Refrigerator As Well..
Features
- Taste the Perfect Beer: Are you ready to enjoy a refreshing beer? Our beer kegerator keeps your beer fresh at a low temperature, while efficiently chilling it. With its auto-defrosting design, it always maintains the best performance. The extended 9.8 ft long beer hose ensures proper foam, resulting in the best flavors and taste.
- Spacious and Reliable: We offer an external bracket for the CO tank, which helps save space inside the kegerator. The kegerator itself is spacious enough to accommodate beer barrels of varying sizes, including US-standard full-size, quarter, and sixth barrels. Plus, there are two additional shelves provided, which allow you to use the kegerator as a refrigerator as well.
- Set the Right Temperature: The keg refrigerator has a knob that lets you easily adjust the inner temperature from 32 to 50 . This allows you to chill your beer to your preferred temperature. Plus, if there is a power outage, the refrigerator will automatically restore the temperature you set once power is restored.
- Designed with You in Mind: Our kegerator fridge comes with four wheels, making it easy to move around. You can lock the two front wheels to prevent it from sliding. The drip tray catches spills and keeps things clean. Plus, the stainless steel guard rail provides extra safety.
- Everything You Deserve: Installing our beer tap kegerator is a breeze. It comes with all the necessary accessories, including a dual tap beer tower, a beer line, a CO tank (empty), a tank bracket, and an installation kit. We also provide hose clamps and gaskets to prevent leaks. So, there's no need to worry about a thing!
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 33.20 x 21.70 x 20.70 inches | Weight: 102.60 pounds
See On Amazon #8
BACOENG Double Faucet Tower Beer Kegerator Conversion Kit with Dual Gauge Regulator, No Tank Stainless Steel Keg Tower
Asin: B071WF5LRK | Ean: 0739770994775 | UPC: 739770994775
Single Faucet Draft Beer Tower: Featuring A Beautiful Standard-Plated Metal Finish And A Matching Standard-Plated Faucet With Metal Lever, This 3" Diameter Air-Cooled Kegco D4743t Draft Beer Tower Is The Same Stylish Tower Used On Most Commercial Grade Kegerators. This Tower Conveniently Includes 5 Feet Of Clear Beer Tubing Ending In A Nozzle And Hex Nut Assembly For Quick Connection To All Standard Keg Couplers, As Well As A Gasket And For Screws For Easy Mounting..
Includes Detailed Instructions: This Kegerator Conversion Kit Comes With Easy-To-Follow Directions And All Of The High-Quality Draft Dispense Components You'll Need To Quickly And Easily Convert Your Refrigerator Into A High-Performance Draft Beer Dispenser.
Standard Metal Beer Faucet Wrench: This Beer Faucet Spanner Wrench Is An Essential Tool That Allows You To Quickly And Confidently Loosen Or Tighten Shank Collars Without Scratching Your Faucets. This Wrench Has Been Built To Last With A Rugged All-Metal Construction And A Convenient 5-1/4" Length..
Lever Handle Keg Coupler: This Nsf-Approved Kegco Kt85d-L D System Keg Coupler Features A Sturdy Nickel-Plated Forged Brass Body With A Stainless Steel Probe, And Is Designed For Use With All Domestic Brand American D System Sankey Kegs. The Lever-Handle Design Is Easy To Use - Simply Pull Out And Then Down On The Handle To Couple The Keg. A 55-Psi Pressure Relief Valve Makes This Coupler Even More Convenient To Use, Allowing Over-Pressurized Gas To Escape Before It Enters Your Keg..
Features
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3 diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4 length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser
- See more on Amazon...
Brand: BACOENG | Manufacturer: BACO ENGINEERING
See On Amazon #9
Metaland Brass 3/4" Barbed Tee Fitting 3 Way T Shape Adapter with Hose Clamps
Asin: B08FTK88SL | Model: ml-00160-btb | PartNumber: ml-00160-btb | Ean: 0779675775291 | UPC: 779675775291
√【Quantity】1Pcs 3/4" Brass Tee Barbed Fitting, 3Pcs Hose Clamps..
√【Usage】Hose Fittings Are Used In Systems Such As Beer Brewing, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
√【Connetion】This 3 Way Splitter Fitting Can Be Connected To 3 Tubings On All Ends..
√【Size】3/4"Barb X 3/4"Barb X 3/4"Barb, Suitable For 3/4"Id Tubing..
Features
- Material Made of solid brass, high quality, can work in high temperatures and pressure.
- Size 3/4Barb x 3/4Barb x 3/4Barb, suitable for 3/4ID tubing.
- Quantity 1PCS 3/4 brass tee barbed fitting, 3PCS hose clamps.
- Connetion This 3 way splitter fitting can be connected to 3 tubings on all ends.
- Usage Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- See more on Amazon...
Brand: Metaland | Manufacturer: N/P
Weight: 0.00 pounds
See On Amazon #10
FERRODAY 2 Way Gas Manifold 5/16" Barbed Integrated Check Valves CO2 Distributor Independent Shut Off 2 Way CO2 Manifold Gas Distributor for Home Brew Beer Gas Manifold Kegerator Manifold + 3 Clamps
Asin: B089GVYZKP | Model: FE-JN77 | PartNumber: FE-JN77 | Ean: 0757277652516 | UPC: 757277652516
[Individual Shut Off & Built-In Check Valve]: Each Line Boasts Its Built-In Check Valve, Rigorously Checked After Assembly To Prevent Failures And Backflow. Individual Shut-Off Valves For Each Line Provide Independent Flow Control. Use This Two-Port Co2 Manifold To Effortlessly Manage Multiple Lines, Perfect For Kegerator Accessories..
[Add To Cart With No Regret]: Ferroday 2-Way Gas Manifold Is Perfect For Home Brewers, Bar Owners, And Breweries To Easily Split Gas For Beverage Dispensing And Forced Carbonation. We Are Committed To Offering High-Quality Products And Lifetime Technical Service, This Co2 Gas Distributor Will Be A Helpful Addition To Your Brewing Accessories..
[Pre-Examination & Easy Installation]: Water Tested After Assembly Ensures No Air Leaks. Internally Cleaned For No Blockage Before Assembly For Optimized Air Distribution. Preformed Mounting Holes On The Co2 Distributor Allow Secure Placement On Walls Or Kegerators In Minutes, Making It An Essential Gas Manifold For Beer Brew And Other Setups..
[Premium Commercial Standard]: The Body Of This Co2 Manifold Is Machined From A Single Piece Of Solid Aluminum, Aluminum Body Is Lighter Than Steel, But It Offers High Durability And Impact Resistance, Suitable For Both Home And Commercial Use. High-Impact Metal, Cast Brass, And Stainless Steel Components, Each Stem Anti-Rust Chrome Plated, Ensure Durability..
Features
- [Efficient CO2 Utilization]: The two-way CO2 manifold effortlessly directs gas through 2 lines from one CO2 source, efficiently splitting the gas supply for optimal CO2 utilization. The inlet and Outlet feature 5/16" barbed fittings, ideal for most homebrew gas tubes.
- [Premium Commercial Standard]: The body of this CO2 manifold is machined from a single piece of solid aluminum, aluminum body is lighter than steel, but it offers high durability and impact resistance, suitable for both home and commercial use. High-impact metal, cast brass, and stainless steel components, each stem anti-rust chrome plated, ensure durability.
- [Individual Shut Off & Built-in Check Valve]: Each line boasts its built-in check valve, rigorously checked after assembly to prevent failures and backflow. Individual shut-off valves for each line provide independent flow control. Use this two-port CO2 manifold to effortlessly manage multiple lines, perfect for kegerator accessories.
- [Pre-examination & Easy Installation]: Water tested after assembly ensures no air leaks. Internally cleaned for no blockage before assembly for optimized air distribution. Preformed mounting holes on the CO2 distributor allow secure placement on walls or kegerators in minutes, making it an essential gas manifold for beer brew and other setups.
- [Add to Cart With No Regret]: FERRODAY 2-way gas manifold is perfect for home brewers, bar owners, and breweries to easily split gas for beverage dispensing and forced carbonation. We are committed to offering high-quality products and lifetime technical service, this CO2 gas distributor will be a helpful addition to your brewing accessories.
- See more on Amazon...
Brand: Ferroday | Manufacturer: FERRODAY
See On Amazon #11
WELLBOM CO2 Manifold, 4-Way CO2 Gas Distributor 5/16'' Barb Fitting Beer Keg Gas Manifold Kegerator CO2 Splitter with Integrated Check Valves & 5PCS Hose Clamps
Asin: B0BB7CWS7V
[Quick And Stable Gas Dispensing Device]: The 4-Way Manifold For The Kegerator Is Installed To Create A Draft Dispensing System That Will Enable You To Quickly Serve Your Beer Or Other Carbonated Beverages. A Keg Gas Manifold Can Divide Gas Transferring Into Sections While Maintaining Equal Pressure From Your Keg Regulator To All Beer Taps..
[Wide Application]: You Can Use This 4-Way Gas Manifold For Brewing Co2 Regulator, Sankey Coupler Keg Tap, Ball Lock Keg, Pin Lock Keg, Counter Pressure Bottling Keg To Create Multi-Kegging Systems For Dispensing Beer Fast And Conveniently At Home Or On Travel. If You Encounter Any Problems, We Will Do Our Best To Help You Solve Them, Our Confidence Comes From Your Approval And Support, Your Satisfaction Is Our Greatest Motivation..
[Premium & No Leakage]: This Gas Manifold Is Composed Of Aluminum Body Construction, Brass Barb, And Stainless Steel Shut-Off Valve, Which Has Strong Corrosion Resistance, Anti-Rust, And Very Durable, Healthy Parts Will Not Produce Any Odors To Your Brewing Beer. We Also Provide 5 Hose Clamps To Tighten The Hose Barb Connection To Prevent Any Leaking Between The Co2 Gas Line And Nipple Barb Fitting..
[Independent Shut Off & Built-In Check Valve]: Our 4-Way Kegerator Co2 Gas Manifold Allows You To Attach Multiple Co2 Gas Lines For Various Sankey Kegs Or Ball Lock Kegs. Each Gas Tubing Line Can Be Turned Off Individually Without Affecting The Flow Transferred To Other Kegs. Each Shut-Off Valve Contains A Built-In Check Valve To Ensure That Co2 Carbonation Beer Will Not Flow Back Into The Gas Line If The Brewing Keg Pressure Value Is High..
Features
- [Efficience & Low Cost ]: A 4-way gas manifold is a great way to provide CO2 to multiple kegs within your kegerator or keezer. The homebrew CO2 gas manifold has four O.D 5/16" nipple barb fitting output ports and one 5/16" barb fitting carbonation gas input port, which allows you to dispense beer from four kegs simultaneously using one CO2 gas cylinder, keeps draft beer pressurized and carbonated from keg to tap.
- [Independent Shut Off & Built-in Check Valve]: Our 4-way kegerator CO2 gas manifold allows you to attach multiple CO2 gas lines for various Sankey kegs or ball lock kegs. Each gas tubing line can be turned off individually without affecting the flow transferred to other kegs. Each shut-off valve contains a built-in check valve to ensure that CO2 carbonation beer will not flow back into the gas line if the brewing keg pressure value is high.
- [Quick and Stable Gas Dispensing Device]: The 4-way manifold for the kegerator is installed to create a draft dispensing system that will enable you to quickly serve your beer or other carbonated beverages. A keg gas manifold can divide gas transferring into sections while maintaining equal pressure from your keg regulator to all beer taps.
- [Premium & No Leakage]: This gas manifold is composed of Aluminum body construction, brass barb, and stainless steel shut-off valve, which has strong corrosion resistance, anti-rust, and very durable, healthy parts will not produce any odors to your brewing beer. we also provide 5 hose clamps to tighten the hose barb connection to prevent any leaking between the CO2 gas line and nipple barb fitting.
- [Wide Application]: You can use this 4-way gas manifold for brewing CO2 regulator, Sankey coupler keg tap, ball lock keg, pin lock keg, counter pressure bottling keg to create multi-kegging systems for dispensing beer fast and conveniently at home or on travel. if you encounter any problems, we will do our best to help you solve them, our confidence comes from your approval and support, your satisfaction is our greatest motivation.
- See more on Amazon...
Brand: WELLBOM
See On Amazon #12
TMCRAFT Kegerator Tower Kit, Double Tap Beer Conversion Kit, Stainless Steel Beer Tower with Dual Gauge CGA-320 Regulator & D-System Keg Coupler for Bars, Pubs, and Restaurants
Asin: B0BZYJQQJX | Ean: 0781044463227 | UPC: 781044463227
D System Keg Coupler: This D System Keg Coupler Features A Chrome-Plated Brass Body And Stainless Steel Probe And It Is Compatible With Most American D System Sankey Kegs. The Lever Handle Is Designed To Be Easy To Use And Makes It More Stable And Reliable Than Standard Keg Couplers..
One-Year Warranty: Message Us 24/7 Via Amazon For Full Support And Service If You Are Not Fully Satisfied With Our Beer Tower Kit Or If It Does Not Perform To Your Expectations..
Beer Drip Trays: The Kegerator Tower Kit Is Equipped With A Beer Drip Tray To Collect Excess Beverages And Unexpected Beer Drip. Made Of Heavy-Duty Food-Grade 304 Stainless Steel With A Polished Finish And Equipped With Removable Covers For Convenient Cleaning..
Dual Gauge Regulator: Tmcraft Upgrade Regulator Is Equipped With Dual Pressure Gauges, The Top Pressure Gauge Indicates The Output Pressure, And The Side Pressure Gauge Displays The Remaining Amount In The Tank, And It Is Easy To Adjust And Stabilize The Pressure By Rotating The Adjustment Knob..
Features
- Double Faucet Beer Tower: TMCRAFT beer tower is constructed of premium 304 stainless steel for strong durability and high reliability, which can be used on most commercial and home kegerators. This tower conveniently includes 5 feet beer tubing, ending in a nozzle and 5/8 threaded nut assembly for quick connection to all standard keg couplers.
- Dual Gauge Regulator: TMCRAFT upgrade regulator is equipped with dual pressure gauges, the top pressure gauge indicates the output pressure, and the side pressure gauge displays the remaining amount in the tank, and it is easy to adjust and stabilize the pressure by rotating the adjustment knob.
- D System Keg Coupler: This D system keg coupler features a chrome-plated brass body and stainless steel probe and it is compatible with most American D system Sankey kegs. The lever handle is designed to be easy to use and makes it more stable and reliable than standard keg couplers.
- Beer Drip Trays: The kegerator tower kit is equipped with a Beer Drip Tray to collect excess beverages and unexpected beer drip. Made of heavy-duty food-grade 304 stainless steel with a polished finish and equipped with removable covers for convenient cleaning.
- One-Year Warranty: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our beer tower kit or if it does not perform to your expectations.
- See more on Amazon...
Brand: TMCRAFT
Dimensions: 4.50 x 11.80 x 4.50 Inches
See On Amazon #13
ANPTGHT 1/2" Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air
Asin: B08YJ1V8YX | Model: aww-123101140 | PartNumber: aww-123101140
【Compatible】Stainless Steel Barbed Fittings Can Be Used With Pvc, Pu, Rubber Hose Or Tubing.The Pipe Clamps Can Create A Tight Seal On Flexible Or Semi-Rigid Hose..
【Usage】 Suitable For Applications In Agriculture, Pharmaceutical, Beer Brewing And Food, Laboratory, Chemical Processing Etc..
【Applicability】 Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
【Size】1/2"Barb X 1/2"Barb X 1/2"Barb, Can Be Connected With 1/2" Hose Id..
Features
- Material barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability.
- Size 1/2Barb x 1/2Barb x 1/2Barb, Can be connected with 1/2 Hose ID.
- Compatible stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose.
- Applicability Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- Usage Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc.
- See more on Amazon...
Brand: ANPTGHT | Manufacturer: ANPTGHT
See On Amazon #14
Revefire Stainless Steel 3/8" Hose Barb Tee 3 Way T Shaped Barbed Co2 Splitter Fitting
Asin: B0CLPHV1J1 | Model: 3/8" x 3/8" x 3/8" | PartNumber: 3/8" x 3/8" x 3/8"
【Package Include】1Pcs 3/8" Stainless Steel T Barbed Fitting, 3Pcs Hose Clamps..
【Working Temperature&Pressure】Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
【Application】Hose Fittings Are Used In Systems Such As Beer Brewing, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
【Material】Made Of 304 Stainless Steel, Corrosion Resistant Ductility At High Temperatures, And Low Magnetic Permeability..
Features
- Size 3/8"Barb x 3/8"Barb x 3/8"Barb.
- Material Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability.
- Package Include 1PCS 3/8 stainless steel T barbed fitting, 3PCS hose clamps.
- Application Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- Working Temperature&Pressure Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- See more on Amazon...
Brand: Revefire | Manufacturer: Revefire
Dimensions: 0.48 x 2.58 x 1.51 inches | Weight: 0.12 pounds
See On Amazon #15
Happyreise 304 Stainless Steel 1-1/4" x 1-1/4" x 1-1/4" Hose Barb Fittings, T Shape 3 Way Barb for Fuel/Gas/AIR/Lquid Ect Splitter (2 Packs)
Asin: B0CKYXZL6Q | Model: 1 | PartNumber: 1
Material: Made Of Stainless Steel 304, Last For Long Lifetime,Resistant To Corrosion,Low Magnetic Permeability, High Temperature Ductility And Low Permeability..
Usage: Suitable For Applications In Agriculture, Pharmaceutical, Beer Brewing And Food, Laboratory, Chemical Processing Etc..
Working Temperature&Pressure: Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
Easy To Use: Barb Tee Is Used To Connect Lines For Air, Fuel, Oil And Inert Gases In A Quick And Simple Way..
Features
- Size: 1-1/4" x 1-1/4" x 1-1/4" Barb
- Easy to Use: Barb tee is used to connect lines for air, fuel, oil and inert gases in a quick and simple way.
- Material: Made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability, high temperature ductility and low permeability.
- Working Temperature&Pressure: Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- Usage: Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc.
- See more on Amazon...
Brand: Happyreise | Manufacturer: Happyreise
Dimensions: 5.50 x 3.66 x 3.44 inches
See On Amazon #16
TMCRAFT 1.3 Gal Double-Walled Beer Keg Growler, Pressurized Home Beer Dispenser System with Detachable Keg Spear Keep Fresh and Carbonation for Craft Beer Draft/Homebrew
Asin: B0BFDV52ZB | Model: TMKEG-D5L | PartNumber: TMKEG-D5L | Ean: 0717935746995 | UPC: 717935746995
Derachable Design: Tmcraft Detachable Stainless Steel Keg Spear Can Maintain Pressure After Removing The Regulator, And Will Be More Convenient For Storage. With A High Capacity Of 1.3Gal/5L（Measures 10’’ *10’’）, Fits Standard Home Cooler/Fridge And Easy To Transport..
One Year Warranty: Message Us 24/7 Via Amazon For Full Support And Service If You Are Not Fully Satisfied With Our Mini Keg Or It Does Not Perform To Your Expectations..
Co2 Cartridge System: Screw Co2 Gas Cartridges（3/8" Thread）Into The Regulator To Supply Pressurized Carbonation To Your Keg Brewing System. Compatible With Food-Grade 16G Threaded Co2 Gas Cartridges..
Durable Regulator: Compared To The Built-In Plastic Pressure Regulator, Our External Stainless Steel Pressure Regulator Is More Durable And Stable. Monitor The Current Psi From The Regulator Gauge, Fine-Tune Pressure By Rotating The Adjustment Knob To Ensure Beer Get Perfect Carbonation And Head..
Features
- DOUBLE-WALLED INSULATION: TMCRAFT growler features double-walled stainless steel insulation structure which keeps your drinks cold for up to 48 hours. Food grade 304 stainless steel keeps beer flavors and fresh. The new appearance is more recognizable.
- DURABLE REGULATOR: Compared to the built-in plastic pressure regulator, our external stainless steel pressure regulator is more durable and stable. Monitor the current PSI from the regulator gauge, fine-tune pressure by rotating the adjustment knob to ensure beer get perfect carbonation and head.
- DERACHABLE DESIGN: TMCRAFT detachable stainless steel keg spear can maintain pressure after removing the regulator, and will be more convenient for storage. With a high capacity of 1.3GAL/5L measures 10 *10 , fits standard home cooler/fridge and easy to transport.
- CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges 3/8 Thread into the regulator to supply pressurized carbonation to your keg brewing system. Compatible with food-grade 16g threaded CO2 gas cartridges.
- ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations.
- See more on Amazon...
Brand: TMCRAFT | Manufacturer: TM-DIRECT
See On Amazon #17
Metaland Stainless Steel 3/8" Hose Barb Tee 3 Way T Shaped Co2 Splitter
Asin: B08G1RJ38P | Model: ml-00930-stb | PartNumber: ml-00930-stb | Ean: 0779675775772 | UPC: 779675775772
√【Quantity】1Pcs 3/8" Stainless Steel Tee Barbed Fitting, 3Pcs Hose Clamps..
√【Usage】Hose Fittings Are Used In Systems Such As Beer Brewing, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
√【Working Temperature&Pressure】Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
√【Size】3/8"Barb X 3/8"Barb X 3/8"Barb, Suitable For 3/8"Id Tubing..
Features
- Material Made of stainless steel 304, strength and resistance to corrosion.
- Size 3/8Barb x 3/8Barb x 3/8Barb, suitable for 3/8ID tubing.
- Quantity 1PCS 3/8 stainless steel tee barbed fitting, 3PCS hose clamps.
- Working Temperature&Pressure Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- Usage Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- See more on Amazon...
Brand: Metaland | Manufacturer: Metaland
See On Amazon #18
Bev Rite Air Distributor 5/16", CO2 Manifold - 3 way
Asin: B00J4P4PNU | Model: CPG223 | PartNumber: CPG223 | Ean: 0741459037635 | UPC: 741459037635
5/16" Barbed Inlet And 5/16" Barbed Outlets.
High Quality Construction.
Shutoffs With Check Valves.
Features
- Aluminum Body
- Shutoffs with check valves
- 5/16 barbed inlet and 5/16 barbed outlets
- High quality construction
- See more on Amazon...
Brand: Bev Rite | Manufacturer: Chill Passion Inc.
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #19
EdgeStar KC2000TWIN Full Size Dual Tap Kegerator & Draft Beer Dispenser - Black
Asin: B0170O0D82 | Model: KC2000TWIN | PartNumber: KC2000TWIN | Ean: 0846844010429 | UPC: 846844010429
For Freestanding Use Only; 5 Lb. Co2 Cylinder (Supplied Empty) Included With External Or Internal Mounting Capabilities.
For A Stainless Steel Version Please See Model Kc2000sstwin, For A Single Tap Kc2000, Single Tap Stainless Kc2000ssa.
External Dimensions: 48 1/2 X 20 1/10 X 24 13/16 (Height Includes The Draft Tower); Warranty 90 Days Labor 1 Year Parts.
Temperatures: Low 30S To Mid 40S Degrees; Rolling Casters Included For Easy Mobility; Protective Floor Plate.
Features
- Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
- Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
- For freestanding use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
- External Dimensions: 48 1/2 x 20 1/10 x 24 13/16 (height includes the draft tower); Warranty 90 days labor 1 year parts
- For a stainless steel version please see model KC2000SSTWIN, for a single tap KC2000, single tap stainless KC2000SSA
- See more on Amazon...
Brand: EdgeStar | Manufacturer: EdgeStar
Dimensions: 34.12 x 25.69 x 20.18 inches | Weight: 90.40 pounds
See On Amazon #20
Metaland Stainless Steel 1/2" Hose Barb Y Barbed Fitting 3 Way Wye Adapter with 3pcs Hose Clamps
Asin: B08GG7TVSF | Model: ml-01030-syb | PartNumber: ml-01030-syb | Ean: 0779675775840 | UPC: 779675775840
√【Quantity】1Pcs 1/2" Stainless Steel Y Barbed Fitting, 3Pcs Hose Clamps..
√【Usage】Hose Fittings Are Used In Systems Such As Beer Brewing, Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
√【Working Temperature&Pressure】Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
√【Size】1/2"Barb X 1/2"Barb X 1/2"Barb, Suitable For 1/2"Id Tubing..
Features
- Material Made of stainless steel 304, strength and resistance to corrosion.
- Size 1/2Barb x 1/2Barb x 1/2Barb, suitable for 1/2ID tubing.
- Quantity 1PCS 1/2 stainless steel y barbed fitting, 3PCS hose clamps.
- Working Temperature&Pressure Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- Usage Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- See more on Amazon...
Brand: Metaland | Manufacturer: Metaland
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search