T-NUT 1/4-20 X 1/4" Length, 3 Prong, Steel, Press-in Threaded Insert for Wood OR Plastic. (Pack of 50)
Asin: B07HY93JPB | Model: TN2520-08-3 | PartNumber: TN2520-08-3
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy Installation With Manual Tools.
Has Sharp Prongs Under The Flange That Dig Into The Material Like A Nail..
Features
- T-NUTS ARE A PRESS-IN TYPE OF THREADED INSERT - EASLY INSTALLED WITH A HAMMER.
- HAS SHARP PRONGS UNDER THE FLANGE THAT DIG INTO THE MATERIAL LIKE A NAIL.
- EASY INSTALLATION WITH MANUAL TOOLS
- See more on Amazon...
Brand: Hanson Rivet | Manufacturer: HANSON RIVET
See On Amazon Similar To TNUT 1 420 X 1
#1
COIDEA 1/4" Thread Furniture Feet Levelers, 12 PCS Adjustable Furniture Feet Threaded Screw in, Leveling Feet Screw On Furniture Glide Leveling for Table, Cabinets, Chairs, Stool Legs(1/4"-20)
Asin: B0C4F7BYLD | Model: CBT3966 | PartNumber: CBT3966
✔ Easy Installation - For Furniture Legs With Existing 1/4”-20 Thread, Simply Screw In The Leg Leveler To Adjust The Height. Otherwise Need To Pre-Drill A 5/16” Hole And Insert The T-Nut For Universal Installation, And Then Screw In The Levelers And Adjust To The Desired Height. Note: Adjustable Furniture Feet Recommends For Wood Furniture With A Leg Diameter Greater Than 1". If Less Than This Size, There Is A Risk Of Cracking During Installation. The Package Not Included T-Nuts!.
✔ Service Guarantee - Customer Satisfaction Is Our Top Priority. If You Receive The Wrong Quantity Or Size Of The Adjustable Furniture Feet, Please Contact Us In Time To Get A New Replacement Or Refund, And We Will Reply To You Within 24 Hours..
✔ Wide Application - The Adjustable Furniture Feet Can Be Widely Used On Indoor, Patio, And Outdoor Furniture Feet To Level Them To The Same Height Flexibly, Such As Tables, Chairs, Kitchen Cabinets, Stools, Dressers, Patio, And Outdoor Furniture, Bar, And Restaurant Tables And Chairs Feet. Suit For All Types Of Floor Including Wood, Tile, And Carpet..
✔ Material & Function - No Shaking! The Furniture Leveling Feet Is Made From Galvanized Steel And A Black Pp Non-Skid Base. Adjustable The Leveling Feet Quickly And Easily To The Balanced Height. Keep Your Furniture And Floor From Being Scratched And Damaged, And Reduced Noise While Moving Furniture. The Adjusted Range Of The Table Leveling Feet Is Between 1/4" And 3/4" In Height And Supports More Than 200 Pounds Per Product..
Features
- Size - 12pcs furniture levelers for each package. Inch coarse thread, 1/4"-20 UNC. Product height is 1"(25mm), screw length is 0.7"(18mm), base diameter is 1"(25mm), and base thickness is 0.28"(7mm). Look at the second picture in the image to get specific details. Suitable for most USA-made furniture feet as replacement feet to update your furniture feet simply. Please check the size carefully to make sure that it is suitable for your replacement.
- Material & Function - No shaking! The furniture leveling feet is made from galvanized steel and a black PP non-skid base. Adjustable the leveling feet quickly and easily to the balanced height. Keep your furniture and floor from being scratched and damaged, and reduced noise while moving furniture. The adjusted range of the table leveling feet is between 1/4 and 3/4 in height and supports more than 200 pounds per product.
- Easy Installation - For furniture legs with existing 1/4 -20 thread, simply screw in the leg leveler to adjust the height. Otherwise need to pre-drill a 5/16 hole and insert the t-nut for universal installation, and then screw in the Levelers and adjust to the desired height. Note: Adjustable furniture feet recommends for wood furniture with a leg diameter greater than 1. If less than this size, there is a risk of cracking during installation. THE PACKAGE NOT INCLUDED T-NUTS!
- Wide Application - The adjustable furniture feet can be widely used on indoor, patio, and outdoor furniture feet to level them to the same height flexibly, such as tables, chairs, kitchen cabinets, stools, dressers, patio, and outdoor furniture, bar, and restaurant tables and chairs feet. Suit for all types of floor including wood, tile, and carpet.
- Service Guarantee - Customer satisfaction is our top priority. If you receive the wrong quantity or size of the adjustable furniture feet, please contact us in time to get a new replacement or refund, and we will reply to you within 24 hours.
- See more on Amazon...
Brand: COIDEA | Manufacturer: COIDEA
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.20 Pounds
Warranty: 1 year.
See On Amazon #2
Wensilon 100pcs 1/4"-20 T-nut 304 Stainless Steel Four-jaw - for Home, Hotel Outdoor Threaded Insertion
Asin: B0BXJ72HDW | Model: 100001 | PartNumber: 100001 | Ean: 0704771636986 | UPC: 704771636986
Application: T-Nuts Are Suitable For Most Indoor And Outdoor Conditions, Suitable For Wood, Climbing Walls, Sofas, Beds, Etc.
Product Specifications: 1/4"-20.
Usage: Pre-Drill The Holes At The Installation Location First, And Hammer The Nuts Into The Pre-Drilled Holes During Installation.
Product Material: Our T-Nuts Are Made Of 304 Stainless Steel, 304 Stainless Steel Is Just A Material With Strong Rust And Corrosion Resistance Than Most Materials On The Market With A Longer Life Cycle, So T-Nuts Can Be Used For A Longer Period Of Time.
Features
- WHAT YOU GET: You will receive the quantity of 100 carbon steel T-nuts, we calculated the quantity of each package, you will not receive the product and find the product quantity is not enough
- PRODUCT MATERIAL: Our T-nuts are made of 304 stainless steel, 304 stainless steel is just a material with strong rust and corrosion resistance than most materials on the market with a longer life cycle, so T-nuts can be used for a longer period of time
- APPLICATION: T-nuts are suitable for most indoor and outdoor conditions, suitable for wood, climbing walls, sofas, beds, etc
- USAGE: Pre-drill the holes at the installation location first, and hammer the nuts into the pre-drilled holes during installation
- PRODUCT SPECIFICATIONS: 1/4-20
- See more on Amazon...
Brand: Wensilon | Manufacturer: Wensilon
Dimensions: 0.30 x 0.73 x 0.73 Inches | Weight: 0.19 pounds
See On Amazon #3
POWERTEC 1/4-20 T Nuts, 50 Pcs | 4 Pronged Tee Nuts for Bolts and Stem Caster Wheels, Threaded Inserts for Wood Working, Rock Climbing Holds and Furniture, For Use with Hammer | 9/16" length (QTN1102)
Asin: B073XL2DQJ | Model: QTN1102 | PartNumber: QTN1102 | Ean: 0709619858346 | UPC: 709619858346
Applications: These Multi-Functional Fasteners Provide A Stable And Non-Rotating Nut Placement For An Assortment Of Diy Task, Furniture Restoration, Woodworking Projects, And Can Even Be Used For Rock Climbing Holds.
Product : Includes A 1 Year Manufacturer Ensuring Customer Satisfaction.
Dimensions: Thread Size: 1/4-Inch Unc-20, Flange Die: 23/32-Inch, Barrel Height: 19/32-Inch, Prong Height: 17/64-Inch, Drill Size: 5/16-Inch.
Premium Quality: Each Pronged T-Nut Is Made From Heavy Duty Steel And Feature An Anti-Rust/ Corrosion Resistant Zinc Plated Design For Long Lasting Durability.
Features
- FUNCTION: Tee Nuts are used for fastening harder materials, such as metal to wood or softer woods to plastic, helping to minimize splitting of the mating surface
- PREMIUM QUALITY: Each pronged t-nut is made from heavy duty steel and feature an anti-rust/ corrosion resistant zinc plated design for long lasting durability
- APPLICATIONS: These multi-functional fasteners provide a stable and non-rotating nut placement for an assortment of DIY task, furniture restoration, woodworking projects, and can even be used for rock climbing holds
- DIMENSIONS: Thread size: 1/4-Inch UNC-20, Flange Die: 23/32-Inch, Barrel Height: 19/32-Inch, Prong Height: 17/64-Inch, Drill Size: 5/16-Inch
- PRODUCT : Includes a 1 year manufacturer ensuring customer satisfaction
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 1.50 x 6.00 x 4.00 inches | Weight: 0.49 Pounds
See On Amazon #4
1/4"-20 T-Nuts (100 Pack), Zinc-Plated Steel Corrosion Resistant, 5/16" Barrel Length, 4-Pronged Tee Nut for Wood, Rock Climbing Holds, Cabinetry
Asin: B0CCYQ8QBH | Model: 1/4"-20 | PartNumber: 1/4"-20 | Ean: 0755502853615 | UPC: 755502853615
【Full Thread】 1/4"-20.
【Package Quantity】 100Pcs T-Nuts.
【100% Satisfaction Guarantee】These Spoons Are Durable And You Will Be Satisfied. If You Have Any Questions, Please Contact Us, We Will Ensure Your Satisfaction..
【Height】 5/16".
【Material】Carbon Steel.
Features
- High Quality Steel This T Nut is zinc coated steel which is one of the most prevalent types of corrosion-resistant coatings, making it last longer than other nuts on the market today. Our T Nuts are very strong and are great for both indoor and outdoor use.
- Material Carbon Steel
- Full Thread 1/4-20
- Height 5/16
- Package Quantity 100pcs T-Nuts
- 100% Satisfaction Guarantee These spoons are durable and you will be satisfied. If you have any questions, please contact us, we will ensure your satisfaction.
- See more on Amazon...
First Available: 09/26/2023
Brand: Aovchei | Manufacturer: Aovcher
Dimensions: 0.40 x 1.00 x 1.00 inches | Weight: 0.50 pounds
See On Amazon #5
1/4"-20 T-Nuts, (120Pack),Pronged Tee Nut for Wood, Rock Climbing Holds, Cabinetry,Furniture (1/4"-20)
Asin: B09DKV9MWY | Ean: 0191813927087 | UPC: 191813927087
Base Info: Thread Diameter:1/4"-20; Pitch: 1.5Mm; Height: (H1)9.9Mm/0.39"; Total Diameter: (D)17Mm/0.68"; Base Plate Thickness: (T)1Mm/0.04".
Package: 120 Pieces X1/4"-20 T Nuts.(Note: 1. Do Not Directly Tap The Thread To Avoid Making The Thread Unusable. 2. According To The Size Of The Connected Load, Select The Corresponding T-Nut To Match To Avoid Falling Off Due To Excessive Load.).
How To Use: First Make A Hole According To The Outer Diameter Of The Rod, Insert The Outer Rod Of The Pronged Tee Nut Into The Hole, Hit The Bottom Of The Nut Flange With A Hammer, Let The 4 Claws Be Inserted Into The Wood, And A Stable And Firm Nut Connection Is Realized..
Usage: Used For Wood Rock Climbing Wall Hold Plywood Particle Board ,Wooden Furniture And Other Woodworking Projects.Commonly Used In Fixed Cabinets, Table And Chair Legs, Leather Bags, Climbing Wall Installations, Etc..
Features
- Material Top Quality Zinc Plated Steel; heat treatment strengthening process, surface galvanized,,Moisture resistance, oxidation resistance, corrosion resistance.
- Usage: Used for wood rock climbing wall hold plywood particle board ,wooden furniture and other woodworking projects.Commonly used in fixed cabinets, table and chair legs, leather bags, climbing wall installations, etc.
- Base info: Thread Diameter:1/4-20; Pitch: 1.5mm; Height: (H1)9.9mm/0.39; Total Diameter: (D)17mm/0.68; Base Plate Thickness: (T)1mm/0.04
- How to use: First make a hole according to the outer diameter of the rod, insert the outer rod of the pronged tee nut into the hole, hit the bottom of the nut flange with a hammer, let the 4 claws be inserted into the wood, and a stable and firm nut connection is realized.
- Package: 120 Pieces x1/4-20 T Nuts.(Note: 1. Do not directly tap the thread to avoid making the thread unusable. 2. According to the size of the connected load, select the corresponding t-nut to match to avoid falling off due to excessive load.)
- See more on Amazon...
Brand: Tsurpcao | Manufacturer: Tsurpcao
See On Amazon #6
Axageid 20 Packs 1/4-20 Threaded Steel Roll in T-Nut with Ball Spring, T Slot Accessories for Aluminum Extrusion Profile Rail
Asin: B0C4MW5GJL | Model: DZ-20 | PartNumber: DZ-20
3.The Ball Spring Allows You To Hang This T Slot Aluminum Extrusion Accessory In A Vertical Position..
5.Easy To Install: Sliding Nut Can Only Be Inserted Into T-Slot From The End Profile, Very Easy To Be Slide Into T-Slot Of Aluminum Profile. Back Spring Ball Can Be Fixed Its Position Which Make Installation Very Simple And Reliable..
4.Size And Type: Roll In Spring T Nuts Measures .203 X .386 X .630 Inches Long With A 1/4-20 Thread And Comes With A Ball Spring. For Use With 1010, 1020, 2020, And Any Other 1.0" Based Aluminum Extrusions..
2.Widely Use: This T-Nuts Widely Used For Building Industrial Aluminum Frame Structures, 3D Printers, Cnc Routers, Cnc Laser Cutters, Robotics Projects, 3D Carvers, Machine Guards, Workstations, Etc..
Features
- 1.Premium Material: Roll-in spring T-Nut is made of 1045 steel with a bright zinc finish, durable for long lasting and rust-proof.
- 2.Widely Use: This T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, 3D carvers, machine guards, workstations, etc.
- 3.The ball spring allows you to hang this t slot aluminum extrusion accessory in a vertical position.
- 4.Size and Type: Roll in Spring T Nuts measures .203 x .386 x .630 inches long with a 1/4-20 thread and comes with a ball spring. For use with 1010, 1020, 2020, and any other 1.0 based aluminum extrusions.
- 5.Easy to Install: Sliding nut can only be inserted into T-slot from the end profile, Very easy to be slide into T-slot of aluminum profile. Back spring ball can be fixed its position which make installation very simple and reliable.
- See more on Amazon...
Brand: Axageid | Manufacturer: Axageid
Dimensions: 0.50 x 3.00 x 3.00 inches
See On Amazon #7
T Nuts 1/4"-20,5/16"-18, 3/8"-16,Hincell 120pcs Zinc Plated Steel T-Nut 4 Pronged Tee Blind Nuts Assortment Kit for Wood, Rock Climbing Holds, Cabinetry, Furniture,etc.
Asin: B09FGPLY22 | Model: HL210903002 | PartNumber: HL210903002 | Ean: 0613852330180 | UPC: 613852330180
✿ The Package Contains 3 Sizes, Included: 1/4"-20 X 5/16" ,5/16"-18 X 5/16" , 3/8"-16 X 7/16";Packing Quantity: 150Pcs, Packed In A Rugged Convenient Re-Sealable Plastic Storage Case..
☛ 100% Satisfaction Assurance ---- We Provide 24 Hour Service Time For You, If You Come Across Any Issues About Our Products, Please Feel Free To Contact Me By Email..
✿Wide Application:T Nut Use On Sheet Metal And Wood; For Household Appliances, Office Equipment, Toys, Electrical Aappliances, Furniture, Etc..
✿ Material: The T Nuts Made From High Quality Carbon Steel, Surface Is Nickel-Plated For Good Rust Resistance And Good Performance,These Nuts Have High Hardness And A Long Service Life..
Features
- High Quality 4 Pronged Zinc Plated Steel T-Nut Assortment Kit
- Material: The T nuts Made from high quality carbon steel, Surface is Nickel-plated for good rust resistance and good performance,these nuts have high hardness and a long service life.
- The Package Contains 3 Sizes, Included: 1/4-20 x 5/16 ,5/16-18 x 5/16 , 3/8-16 x 7/16;Packing Quantity: 150pcs, Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
- Wide Application:T nut use on Sheet Metal and Wood; For Household Appliances, Office Equipment, Toys, Electrical aAppliances, Furniture, etc.
- 100% Satisfaction Assurance ---- We provide 24 Hour service time for you, if you come across any issues about our products, please feel free to contact me by email.
- See more on Amazon...
Brand: Hincell | Manufacturer: Hincell
Dimensions: 1.50 x 7.87 x 5.31 inches | Weight: 1.32 pounds
See On Amazon #8
Furniture Leveling Feet 1/4-20 Screw in Threaded Furniture Levelers Adjustable Table Chair Leg Levelers Feet for Bar Stool Bed Cabinet Patio Furniture Legs,12Pack with T-Nuts
Asin: B0CCP92Z8H | Model: Furniture Leg Levelers | PartNumber: Furniture Leg Levelers
High Load-Bearing Capacity- Crafted From Robust Galvanized Steel And Nylon, These Furniture Levelers Can Withstand More Than 200 Pounds Each. They Also Include Threaded Insert T-Nuts For Added Stability..
【Important】For Best Results, Use This Product On Indoor Or Outdoor Wood Furniture With Leg Diameter Exceeding 1" (E.G., Coffee Tables, Dining Chair Legs). Installing On Smaller Legs May Risk Cracking..
Note: Comes With 12 Insert Nuts As Bonus..
Easy Installation- For Furniture Legs With Existing 1/4”-20 Thread, Simply Screw In The Leg Leveler To Adjust The Height. Or, Pre-Drill A 5/16” Hole And Insert The T-Nut For Universal Installation, Screw In The Leg Levelers And Adjust To The Desired Height..
Adjustable Leveling Feet - Product Total Height Is 1"(25Mm); 0.75” Long Screw Shaft With 1/4”-20 Thread Type; 1” Base Diameter With 1/4” Thickness; Fully Adjustable Height From 1/4" And 3/4" For Maximum Support And Adjustability..
Features
- Function- No More Folded Up Cardboard Under Table Legs! These furniture leg levelers allow easy rasing and leveling of furniture at home, office, restaurant, school or caf , preventing furniture from wobbling and allows furniture to move easily, they also safeguard floors from unsightly scratches.
- Adjustable Leveling Feet - Product total height is 1(25mm); 0.75 long screw shaft with 1/4 -20 thread type; 1 Base Diameter with 1/4 Thickness; Fully Adjustable Height from 1/4 and 3/4 for maximum support and adjustability.
- High Load-Bearing Capacity- Crafted from robust galvanized steel and nylon, these furniture levelers can withstand more than 200 pounds each. They also include threaded insert t-nuts for added stability.
- Easy Installation- For furniture legs with existing 1/4 -20 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 5/16 hole and insert the t-nut for universal installation, screw in the leg levelers and adjust to the desired height.
- Important For best results, use this product on indoor or outdoor wood furniture with leg diameter exceeding 1 (e.g., coffee tables, dining chair legs). Installing on smaller legs may risk cracking.
- Note: Comes with 12 insert nuts as bonus.
- See more on Amazon...
Brand: Anwenk | Manufacturer: Anwenk
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #9
2 Pack 25mm Large Knurled Edge 1/4"-20 Female Thumb Wheel Lock Nut Adapter (Black)
Asin: B08DRMDSQ8 | Ean: 6972777690620
Material:Aluminum Alloy.
Thumb Wheels: 25Mm Diameter; Thickness 10Mm.
Female Thread: 1/4"-20.
Features
- This Lock Nut features a standard 1/4" hole that can be used to attach the camera to a tripod.
- Female thread: 1/4-20
- Material:aluminum alloy
- Thumb wheels: 25mm diameter; Thickness 10mm
- See more on Amazon...
Brand: Evaty | Manufacturer: Evaty
Dimensions: 0.40 x 1.00 x 1.00 inches
See On Amazon #10
Kindroufly 1/4-20 Threaded Inserts for Wood, 1/4-20 T Nuts, 1/4-20 Bolts Fully Threaded Button Head Socket Cap Screws, Length 3/4" 1" and 1/4" Washers with Hex Wrench, Total 64 Pieces
Asin: B0BPSVKCXK | Model: Kindroufly-T-Nuts-Inserts-Screws | PartNumber: Kindroufly-T-Nuts-Inserts-Screws | Ean: 0749355456291 | UPC: 749355456291
√【1/4-20 Threaded Nuts Screws Washers Kit Function】: Wood Threaded Inserts Are Insert Nuts That Go Into A Predrilled Hole In Wood And Has Internal Threads. Our Wood Insert Nuts Feature Threaded Designs, External Protrusions Bite Into The Wood, Provide Superior Holding Power And Prevent The Insert Nuts From Either Turning Or Pulling Out In All Applications..
√【Widely Applications】: Kindroufly 64 Pieces 1/4-20 Threaded Inserts T Nuts Screws Bolts Washers Assortment Kit Are Widely Used For Soft Woods, Plywood And Composition Board. It Is A Necessity Fastener For Furniture Repair. If You Have Any Questions About Our Products, Welcome Your Inquiry And We Will Solve The Problem For You In Time..
√【Multi-Functional Storage Box】: All Kindroufly 64 Pieces 1/4-20 Threaded Inserts T Nuts Screws Bolts Washers Are Packed In A Solid Transparent Storage Box. We Put Nut Inserts Bolts Washers In 5 Grids , Each Size Are Marked With A Clear Label. It Is Very Convenient For You To Choose Size, Easy To Carry And Store, Which Can Save Your Time And Energy..
√【High Quality Material】: Kindroufly T Nuts And Threaded Inserts Are Made Of Blue Zinc Plated Carbon Steel, The Material Of The Bolts And Washers Is 304 Stainless Steel, Which Have Smooth Surface, High Strength, Not Easy To Deform, Corrosion Resistance And Rust Resistance, Can Ensure A Long Time Using In Bad Environment..
Features
- Kindroufly Combination : 1/4"-20 x 3/5" threaded inserts, 1/4"-20 x t nuts, 1/4-20 x 3/4", 1" button head socket cap bolts, 1/4" flat washers with matching hex wrench, total 64 pieces packed in a solid transparent storage box, different sizes and enough quantities can meet your different daily long time using.
- High Quality Material : Kindroufly t nuts and threaded inserts are made of blue zinc plated carbon steel, the material of the bolts and washers is 304 stainless steel, which have smooth surface, high strength, not easy to deform, corrosion resistance and rust resistance, can ensure a long time using in bad environment.
- 1/4-20 Threaded Nuts Screws Washers Kit Function : Wood threaded inserts are insert nuts that go into a predrilled hole in wood and has internal threads. Our wood insert nuts feature threaded designs, external protrusions bite into the wood, provide superior holding power and prevent the insert nuts from either turning or pulling out in all applications.
- Multi-functional Storage Box : All Kindroufly 64 pieces 1/4-20 threaded inserts t nuts screws bolts washers are packed in a solid transparent storage box. we put nut inserts bolts washers in 5 grids , each size are marked with a clear label. It is very convenient for you to choose size, easy to carry and store, which can save your time and energy.
- Widely Applications : Kindroufly 64 pieces 1/4-20 threaded inserts t nuts screws bolts washers assortment kit are widely used for soft woods, plywood and composition board. It is a necessity fastener for furniture repair. If you have any questions about our products, welcome your inquiry and we will solve the problem for you in time.
- See more on Amazon...
Brand: Kindroufly | Manufacturer: Kindroufly
See On Amazon
Looking For Something Else?
Search