uxcell Masonry Drill Bit 16mm x 200mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for Impact Drill
Asin: B07J4NTW9H | Model: a18081100ux0397 | PartNumber: a18081100ux0397
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flute Design: Optimized Flute Design To Reduce Bit Stress And Make The Bit Run Cooler For Long Life..
Wide Use: Designed For Fast Drilling In Concrete, Masonry, Artificial Stone, And Rock.
Centric Tip: Centric Tip For Optimal Hole Geometry And Provides Rounder Holes. For Use In Drill Requiring Special Direct System Shank.
Carbide Tip: Carbide-Tipped Drill Bit Head Is Harder And Tougher To Extreme Loads. 4-Flute Design For Fast Dust Removal.
Features
- Features: Diameter :16mm / 0.63"; Useable Length : 120mm / 4.7"; Total Length : 200mm / 7.87"; Shank Size : 9mm / 0.35"
- Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 4-flute design for fast dust removal
- Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life.
- Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank
- Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 9.06 x 1.18 Inches
See On Amazon Similar To uxcell Masonry Drill Bit 16mm
#1
uxcell Reduced Shank Twist Drill Bits 16.5mm High Speed Steel 4341 with 10mm (3/8") Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CWMWGC | Model: a19102500ux0068 | PartNumber: a19102500ux0068
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16.5mm / 0.65"; Shank Diameter : 10mm / 3/8"; Cutting Edge Length: 57mm / 2.24"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 6542 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DCBT6D | Model: a19102500ux0084 | PartNumber: a19102500ux0084
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 56mm / 2.2"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 16.5mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MJ8TBM4 | Model: a18103100ux0181 | PartNumber: a18103100ux0181
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 16.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 inches | Weight: 0.00 Pounds
See On Amazon #4
uxcell Masonry Drill Bit 16mm x 160mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for Impact Drill
Asin: B07J4N4Q5H | Model: a18081100ux0385 | PartNumber: a18081100ux0385
Flute Design: Optimized Flute Design To Reduce Bit Stress And Make The Bit Run Cooler For Long Life..
Wide Use: Designed For Fast Drilling In Concrete, Masonry, Artificial Stone, And Rock.
Centric Tip: Centric Tip For Optimal Hole Geometry And Provides Rounder Holes. For Use In Drill Requiring Special Direct System Shank.
Carbide Tip: Carbide-Tipped Drill Bit Head Is Harder And Tougher To Extreme Loads. 2-Flute Design For Fast Dust Removal.
Features
- Features: Diameter :16mm / 0.63"; Useable Length : 75mm / 3.0"; Total Length : 160mm / 6.3"; Shank Size : 9mm / 0.35"
- Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 2-flute design for fast dust removal
- Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life.
- Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank
- Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #5
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D11C6P | Model: a19102500ux0067 | PartNumber: a19102500ux0067
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 60mm / 2.36"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Forstner Drill Bits 16mm, Tungsten Carbide Wood Hole Saw Auger Opener, Woodworking Hinge Hole Drilling Boring Bit Cutter (Blue, Gray)
Asin: B07G5FG65S | Model: a18061100ux0518 | PartNumber: a18061100ux0518
Features: Tungsten Carbide Cutting Tip With Special Heat Treatment For Sharp Cutting Edge, High Hardness, Non-Burrs And Durable Use. Arc Curve Design Head For Easy Chip-Removal, More Efficient Perforation.
Tips: Maximum Speed: 2000Rpm. Used On Desktop (Fixed) Equipment, And Can Not Be Used On Handheld Power Tools (Such As Hand Drill Or Electric Drill). Can Not Drill Metal And Non-Ferrous Metal. To Avoid Causing Damage, Be Sure No Nails Or Other Metal Objects In Wood Before Drilling. The Cutting Edge And Tip Of The Opener Should Be Sharpened In Time..
How To Use: Suitable For Bench Drill, Vertical Drilling Machine, Cnc Carving Machine. Processing Hardwood Or Other Hard Materials Should Be Injected With Water To Improve The Quality And Accuracy Of Drilling, And Extend The Life Of The Hole Opener..
Applications: Can Be Used For Drilling Holes On Wood And Plastic Products, Furniture, Door Hinge. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Fiberglass Etc.. Forstner Drill Bit Is For Ordinary Purpose.
Features
- Forstner Drill Bit: Drilling diameter: 16mm / 0.63"; shank size: 7mm / 0.28"; drilling depth: 48mm / 1.89"; total length: 78mm / 3.07". Thickened carbide cutter and solid hardened steel body, round shank forstner bits for woodworking.
- Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for ordinary purpose
- Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation
- How To Use: Suitable for bench drill, vertical drilling machine, CNC carving machine. Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, and extend the life of the hole opener.
- Tips: Maximum speed: 2000rpm. Used on desktop (fixed) equipment, and can NOT be used on handheld power tools (such as hand drill or electric drill). Can not drill metal and non-ferrous metal. To avoid causing damage, be sure no nails or other metal objects in wood before drilling. The cutting edge and tip of the opener should be sharpened in time.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Reduced Shank Twist Drill Bits 16mm High Speed Steel 4241 with 10mm Shank for Aluminum Alloy Steel Metal Plastic Wood
Asin: B082C6XS4S | Model: a19102500ux0089 | PartNumber: a19102500ux0089
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Versatile Uses: For Use In A Wide Range Of Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Sharp & Spiral Flutes: Sharp Spiral Flutes Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering High Hardness And Toughness For Wear Resistance. Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant..
Features
- Features: Cutting Edge Diameter : 16mm / 0.63"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 125mm / 4.9"; Total Length : 178mm / 7"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering high hardness and toughness for wear resistance. Black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Sharp & Spiral Flutes: Sharp Spiral flutes provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip.
- Versatile Uses: For use in a wide range of aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #8
uxcell 16mm Diamond Core Drill Bits Dry or Wet Hole Saws for Hard Concrete Brick Block Masonry Stone Tile Glass
Asin: B091HRTCJQ | Model: a20112600ux0424 | PartNumber: a20112600ux0424
Dry Or Wet Drilling: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication..
Sharp Cutting Edge: The Core Drill Bits Cut Clean And Fast Holes, And Make Drilling Process Much Easier. Can Be Used On An Electric Hand Drill Or Another Machine, Such As An Angle Grinder, Hex, Or Round Plus Shank..
Large Clearance Hole: Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling To Aid In Faster Cutting And Coring..
Applications: Suitable For Drilling Concrete, Masonry, Hard Brick, Ceramic Tiles, Marble, Stone, Engineering Stone, Brick, Vitrified Tiles, And Other Hard Materials..
Features
- Drilling diameter: 16mm / 0.63"; drilling depth: 10mm / 0.39"; shank size: 9.5mm / 0.37". Non-slip triangle shank fits most electric hand drills and bench drills.
- Applications: Suitable for drilling concrete, masonry, hard brick, ceramic tiles, marble, stone, engineering stone, brick, vitrified tiles, and other hard materials.
- Dry or Wet Drilling: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication.
- Large Clearance Hole: Facilitates the entrance of cooling water and the escape of chips and other particles from drilling to aid in faster cutting and coring.
- Sharp Cutting Edge: The core drill bits cut clean and fast holes, and make drilling process much easier. Can be used on an electric hand drill or another machine, such as an angle grinder, hex, or round plus shank.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 5Pcs 16mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain Bottles Pots Brick
Asin: B073M1D6KP | Model: US-SA-AJD-314622 | PartNumber: US-SA-AJD-314622
Nickel Plated Surface - Nickel Plating Surface Can Extend The Service Life And Enhance The Surface Corrosion Resistance. Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit More Sharp.Electroplated Diamond Is Uniform And More Wear-Resistant..
Features
- SIZE - 16mm(0.63-inch) Drilling Diameter, 7mm(0.28-inch) Shank Diameter. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.Electroplated diamond is uniform and more wear-resistant.
- NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws.
- SPECIAL DESIGN - The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. Not suitable for drilling tempered glass, plastic and wood.
- APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 16mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MQ3XRC7 | Model: a18103100ux0180 | PartNumber: a18103100ux0180
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 16mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 inches | Weight: 0.00 Pounds
See On Amazon #11
uxcell 16mm Diamond Drill Bits Hole Saws Cutter Tool for Stone Concrete
Asin: B07PDXY756 | Model: a19010900ux0962 | PartNumber: a19010900ux0962
Application: Suitable Tool For Cutting Accurate Holes In Some Materials Such As Stone And Concrete..
Package Content: 1Pc X Hole Saw. Provide Different Sizes To Satisfy Your Demands..
Note: Please Remember To Use At A Low Speed And Work With Coolant When Processing..
Material: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge..
Features
- Drilling Diameter: 16mm / 0.63-inch; Total Length: 80mm / 3.15-inch.
- Material: Diamond coating maximizes performance and retains a sharper cutting edge.
- Application: Suitable tool for cutting accurate holes in some materials such as stone and concrete.
- Note: Please remember to use at a low speed and work with coolant when processing.
- Package Content: 1pc x Hole Saw. Provide different sizes to satisfy your demands.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Diamond Hole Saw Core Drill Bit, 16mm Diameter 1/4" Hex Shank Sintered Diamond Hole Cutter for Masonry Porcelain Tile Marble Stone 2pcs
Asin: B09Z6PVW6C | Model: a22032400ux0605 | PartNumber: a22032400ux0605
Sintered Diamond: Diamond Grains Are Permanently Sintered To The Cutting Edge From Inside To Outside. Sintered Diamond Has The Sharpening Property But Electroplated Or Brazed Diamond Can Not Be Sharpened..
1/4 Inch Hex Shank: Quick Change 1/4 Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. Fits Most Bench Drills, Hand Electric Drills. Tips: Reduced Drill Speeds, Low Drill Pressure And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
Features: Large Clearance Hole Facilitates Entrance Of Cooling Water And Escape Of Chips And Other Particles From Drilling. Creates A Precision And Smooth Cut, Less Chipping And Minimizing Breakage..
Wide Applications: Suitable For Drilling Porcelain, Tile, Marble, Stone, Masonry, Brick, Glass. Can Be Dry Or Wet Use. It Is Recommended To Be Used With Water For Cooling And Lubrication To Prolong The Using Life And Increase The Performance..
Features
- Core Drill Bits: Drilling diameter: 16mm / 0.63"; hex shank size: 1/4"; working depth (max .): 43mm / 1.69"; total length: 73mm / 2.87". Provide high efficiency, fast and smooth drilling, but also ensure longer working life.
- Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
- Sintered Diamond: Diamond grains are permanently sintered to the cutting edge from inside to outside. Sintered diamond has the sharpening property but electroplated or brazed diamond can not be sharpened.
- Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
- 1/4 Inch Hex Shank: Quick change 1/4 inch hex shank can be used on power tools more easily and securely. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 2 Pcs Diamond Coated 16mm Spherical Head Mounted Point Grinding Bit
Asin: B00REILC8U | Model: a14102700ux0090 | PartNumber: a14102700ux0090 | Ean: 0702105938904 | UPC: 702105938904
Shank Diameter : 6Mm/ 0.24";Total Length : 60Mm/ 2.4".
Package Content : 2 X Diamond Mounted Point.
Color : Silver Tone;Weight : 53G.
Material : Metal , Diamond;Head Diameter : 16Mm/ 0.6".
Features
- Product Name : Diamond Mounted Point;Head Design : Round Ball Shape
- Material : Metal , Diamond;Head Diameter : 16mm/ 0.6
- Shank Diameter : 6mm/ 0.24;Total Length : 60mm/ 2.4
- Color : Silver Tone;Weight : 53g
- Package Content : 2 x Diamond Mounted Point
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Forstner Drill Bits 16mm, Tungsten Carbide Wood Hole Saw Auger Opener Woodworking Hinge Hole Drilling Boring Bit Cutter Gray with Case
Asin: B07MX911WW | Model: a18121400ux0154 | PartNumber: a18121400ux0154
Features: Tungsten Carbide Cutting Tip With Special Heat Treatment For Sharp Cutting Edge, High Hardness, Non-Burrs And Durable Use. Arc Curve Design Head For Easy Chip-Removal, More Efficient Perforation..
Tips: Maximum Speed: 2000Rpm. Used On Desktop (Fixed) Equipment, And Can Not Be Used On Handheld Power Tools (Such As Hand Drill Or Electric Drill). Can Not Drill Metal And Non-Ferrous Metal. To Avoid Causing Damage, Be Sure No Nails Or Other Metal Objects In Wood Before Drilling. The Cutting Edge And Tip Of The Opener Should Be Sharpened In Time..
How To Use: Suitable For Bench Drill, Vertical Drilling Machine, Cnc Carving Machine. Processing Hardwood Or Other Hard Materials Should Be Injected With Water To Improve The Quality And Accuracy Of Drilling, And Extend The Life Of The Hole Opener..
Applications: Can Be Used For Drilling Holes On Wood And Plastic Products, Furniture, Door Hinge. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Fiberglass Etc...
Features
- Specifications: Drilling dia.: 16mm; shank size: 7mm; drilling depth: 48mm; total length: 80mm. Round shank, cemented carbide cutter and solid hardened steel body.
- Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc..
- Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
- How To Use: Suitable for bench drill, vertical drilling machine, CNC carving machine. Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, and extend the life of the hole opener.
- Tips: Maximum speed: 2000rpm. Used on desktop (fixed) equipment, and can NOT be used on handheld power tools (such as hand drill or electric drill). Can not drill metal and non-ferrous metal. To avoid causing damage, be sure no nails or other metal objects in wood before drilling. The cutting edge and tip of the opener should be sharpened in time.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.98 x 3.74 x 0.98 inches
See On Amazon #15
uxcell 16mm Diamond Drill Bits Hole Saws for Glass Tile Porcelain Marble Ceramic Bottles Pots Brick Pack of 10
Asin: B07MKMPV44 | Model: a18112200ux0246 | PartNumber: a18112200ux0246
Large Clearance Hole: The Diamond Hole Saw With Clearance Hole Facilitates The Entry Of Cooling Water And The Escape Of Chips From The Drilled Hole. Makes The Drilling Process Easier. The Cutting Is Flat And Smooth Without Scratches..
Tips: Use At Low Drilling Speeds And Drilling Pressure. Always Work With Coolant (Water) When Drilling. Not Suited For Concrete Or Depth Beyond About 1/2 Inch. The Hole Should Be Entered Smoothly, And No Side Pressure Is Applied..
Features: Diamond Coating Maximizes Performance And Retains A Sharper Cutting Edge Than Traditional Carbide Or Bimetal Hole Saws. Nickel Plating On These Bits Maximizes Your Tools Life With Great Resistance To Corrosion..
Wide Applications: Suitable For Cutting Accurate Holes On Glass, Ceramic, Tile, Porcelain, Marble, Stone Bottles And Pots. Not Suitable For Drilling Tempered Glass, Plastic And Wood..
Features
- Diamond Drill Bits: Electroplated diamond is uniform and more wear-resistant. The hole saw achieves high precision and smooth cuts without edge breakage, with good toughness and high strength.
- Wide Applications: Suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. Not suitable for drilling tempered glass, plastic and wood.
- Large Clearance Hole: The diamond hole saw with clearance hole facilitates the entry of cooling water and the escape of chips from the drilled hole. Makes the drilling process easier. The cutting is flat and smooth without scratches.
- Features: Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Nickel plating on these bits maximizes your tools life with great resistance to corrosion.
- Tips: Use at low drilling speeds and drilling pressure. Always work with coolant (water) when drilling. Not suited for concrete or depth beyond about 1/2 inch. The hole should be entered smoothly, and no side pressure is applied.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 4.72 x 2.36 inches
See On Amazon #16
uxcell Reduced Shank Drill Bit Set, 16mm 16.5mm Titanium Nitride Coated High Speed Steel 4341 Tri-Flat Shank Drilling Tool for Stainless Steel Alloy Copper, 2pcs
Asin: B0C55BZQ8M
Special Design: Sharp Spiral Flutes Provide Neat And Smooth Cuts. Spiral Groove Facilitates The Export Of Metal Chip. Reduced Shank Drills Expand The Size Range Capacity Of A Portable Drill Chuck. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Clamping And Precise Drilling..
Tips: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier And Improving Smoothness And Dimensional Accuracy. When Using Hand-Held Electric Drill, The Recommended Speed Is 100-1000Rpm/Min; The Larger The Drilling Diameter, The Slower The Drilling Speed..
Titanium Nitride Coating: Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant Than The Regular Black Surface..
Wide Applications: Widely Used For Drilling Stainless Steel, Aluminum Alloy, Iron, Copper, Wood And Plastic. Used On Electric Hand Drill, Drilling Machine And Bench Drill. Drill Metal With High Hardness Or Foreign Substance, The Rotational Speed Should Be Slower Than Normal Drilling..
Features
- Twist Drill Bit: Cutting edge diameter: 16mm / 0.63", 16.5mm / 0.65"; shank diameter: 10mm / 0.39"; Total Length: 150mm / 6.0". Features high hardness, good toughness, high wear resistance, suitable for most general purpose applications.
- Wide Applications: Widely used for drilling stainless steel, aluminum alloy, iron, copper, wood and plastic. Used on electric hand drill, drilling machine and bench drill. Drill metal with high hardness or foreign substance, the rotational speed should be slower than normal drilling.
- Special Design: Sharp spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip. Reduced shank drills expand the size range capacity of a portable drill chuck. Tri-flat on the shank of drills are constructed for tighter clamping and precise drilling.
- Titanium Nitride Coating: Gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant than the regular black surface.
- Tips: Suitable lubricant is conducive to cutting or cooling, making cutting easier and improving smoothness and dimensional accuracy. When using hand-held electric drill, the recommended speed is 100-1000rpm/min; the larger the drilling diameter, the slower the drilling speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 16mm Sintered Diamond Core Drill Bits Hole Saws, Dry or Wet Drilling for Brick Concrete Block Masonry Marble, for M10 Angle Grinder
Asin: B09F9FG2F3
Fit For Angle Grinder: Easily Operate On The M10 Angle Grinder (Not Included Here). Or Need An Adapter For Drill Or Other Machine, Such As Hex, Round Shank Etc. (Not Included Here). Cannot Be Used On Impact Power Tools..
Notices: When Cutting Holes, It Needs To Be Positioned At An Angle Of 45 Degree And Make A Crescent-Shaped Trace On The Material. Then Cut Holes Vertically And Need To Be Cooled With Water..
Features: Large Clearance Hole Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling. Makes Drilling Process Much Easier..
Application: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication. Drill Accurate Holes On Concrete, Masonry, Hard Brick, Marble, Stone, Marble, Glass, Tile And Other Hard Materials..
Features
- Diamond Drill Bits: 16mm cutting diameter. Sintered diamond cutting edge contains diamond particles from inside to outside, to ensure that the edge is always sharp.
- Application: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication. Drill accurate holes on concrete, masonry, hard brick, marble, stone, marble, glass, tile and other hard materials.
- Fit for Angle Grinder: Easily operate on the M10 Angle Grinder (not included here). Or need an adapter for drill or other machine, such as hex, round shank etc. (not included here). Cannot be used on impact power tools.
- Features: Large clearance hole facilitates the entrance of cooling water and the escape of chips and other particles from drilling. Makes drilling process much easier.
- Notices: When cutting holes, it needs to be positioned at an angle of 45 degree and make a crescent-shaped trace on the material. Then cut holes vertically and need to be cooled with water.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 16mm Reduced Shank Cemented Carbide Twist Drill Bits for Hardened Steel Stainless Steel, 1/2 Inch Straight Shank
Asin: B09X9C6RXW | Model: a22021600ux0366 | PartNumber: a22021600ux0366
[Versatile Uses] -Cemented Carbide Drill Bit Can Clean, Accurate Holes In Sheet Metal, Steel, Copper, Brass, Aluminum, Plastic, Wood, Stainless Steel And Cast Iron..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Reduced Shank] - Reduced Shank Twist Drill Bit Can Work With A Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
- [Reduced Shank] - Reduced shank twist drill bit can work with a electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #19
uxcell Reduced Shank Drill Bit 16.5mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS26KRC | Model: a18101200ux0145 | PartNumber: a18101200ux0145
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 16.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches
See On Amazon
Looking For Something Else?
Search