eoocvt DC Converter Buck Module 12V Convert to 5V USB Output Power Adapter
Asin: B07JHH294R | Model: eoocvt | PartNumber: eoocvt | Ean: 0726587265747 | UPC: 726587265747
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of Retardant Pc Material, Characterized By Waterproof, Anti-Shock And Damp-Proof..
Commonly Used In Led Light, Gps Navigation Device, Car Recorder, Displayer, Mp3, Mp4, Cell Phone And Etc..
Over Voltage, Over Current, Over Temperature, Short Circuit, It Can Be Auto Protection, And Can Work In Normal Condition When Restored..
Not Suitable For Apple Products Such As Iphone/Ipad Etc. Easy Installation And Use..
Features
- Convert unstable voltage DC 12V to stable DC 5V/3A 15W output
- Not Suitable for Apple products such as iPhone/iPad etc. Easy installation and use.
- Made of retardant PC material, characterized by waterproof, anti-shock and damp-proof.
- Over voltage, over current, over temperature, short circuit, it can be auto protection, and can work in normal condition when restored.
- Commonly used in LED light, GPS navigation device, car recorder, displayer, MP3, MP4, cell phone and etc.
- See more on Amazon...
Brand: eoocvt | Manufacturer: eoocvt
Weight: 0.09 pounds
See On Amazon Similar To eoocvt DC Converter Buck Module
#1
DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case
Asin: B07JZ2GQJF | Model: 180080AFA | PartNumber: 180080AFA
Display --- Large Clear Digital Lcd Display Voltage & Current Value Simultaneously..
Note --- 1). Output Voltage Is Set As Around 20V By Default, If Your Input Is Lower Than That, Please Turn Potentiometer Anticlockwise For 10 Laps Or More Until Voltage Changes. 2). The Case Is Packaged Unassembled To Avoid Damage During Transit. It Needs To Be Manually Installed. 3). Please Carefully Read The User’S Manual, Especially The “Cautions” Before Using. You Can Find The Pdf Instructions On This Page -- Product Information -- Product Guides And Documents -- User Manual [Pdf]..
Features --- Constant Current/Voltage Mode; Voltage Calibration & Current Calibration; Usb Interface; Protective Case; Short-Circuit Protection; Over-Temperature Protection; Input Reverse Connection Protection..
General Use --- As Ordinary Step-Down Module With Over-Current Protection; As Constant Current Led Driver Module; Diy A Solar Power Controller, Etc..
Features
- PARAMETER --- Input voltage range DC 6V-32V; Output voltage DC 1.5V-32V; Max output current 5A, recommend use of within 4.5A; Max output power 75W, recommend use of within 50W.
- GENERAL USE --- As ordinary step-down module with over-current protection; As constant current LED driver module; DIY a solar power controller, etc.
- DISPLAY --- Large clear digital LCD display voltage & current value simultaneously.
- FEATURES --- Constant current/voltage mode; Voltage calibration & current calibration; USB interface; Protective case; Short-circuit protection; Over-temperature protection; Input reverse connection protection.
- NOTE --- 1). Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 2). The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 3). Please carefully read the user s manual, especially the Cautions before using. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF].
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Dimensions: 0.98 x 1.57 x 2.58 Inches | Weight: 0.15 Pounds
See On Amazon #2
DROK DC Buck Converter, 5.3V-32V to 1.2V-32V 12A Adjustable Power Supply, 5v 9v 12v 24V 30V 32V Step Down Voltage Regulator with LCD Display Volt Transformer Reducer CC CV for RV Solar Panel Golf Cart
Asin: B078Q1624B | Model: REES-1822 | PartNumber: REES-1822 | Ean: 0678535742056 | UPC: 678535742056
【Easy Operation】 A User Manual Will Be Included In Package, Which Can Help You Easier To Operate. The Button Can Control Ouput Voltage On/Off Status, And You Can Set The Default Output State Is On/Off For The Next Time. The Potentiometer Can Help You To Adjust Volt Amp In A Simple And Fast Way..
【Application】 The Volt Conversion Board Can Be Used For 5V 6V 9V 12V 24V 30V 32V 3A 5A 10A Devices, Like Solar Panel, Lab, Experiment, Rv, All-Terrain Vehicle, Car, Battery Charger, Led Stripes, Etc..
【Protection】 It Has Reverse-Connect Protection, Short Circuit Protection And Over Current Protection. When You Connect The Input Wire Reversely Or Short Circuit, The Module Will Not Burn. And Roate The Cc Potentiometer To Set Over Current Protection Value You Want..
【Characteristics】 This Buck Converter Is Equipped With Lcd Display, Acrylic Case And Heat Sink. Lcd Screen Can Display Input/Output Voltage, Output Current And Output Power. Voltage Precision Is 0.05V, Current Precision Is 0.005A. Acrylic Case Can Keep The Converter Board Away From Dust, Which Is Protective. Heat Sink Can Keep Module 120W For Long-Time Using In A Low Temperature. If You Want To Reach Maximum Power 160W, Please Improve Heat Dissipation..
Features
- Parameter DROK Power Supply Module input volt range is DC 5.3-32V; Output volt range is DC 1.2-32V which is variable. Output current can reach to 8A and Output Power can reach to 120W for long-time use. If enhance heat dissipation, this converter can reach 12A and 160W output.
- Characteristics This Buck Converter is equipped with LCD Display, Acrylic Case and Heat Sink. LCD Screen can display input/output voltage, output current and output power. Voltage precision is 0.05V, current precision is 0.005A. Acrylic case can keep the converter board away from dust, which is protective. Heat Sink can keep module 120W for long-time using in a low temperature. If you want to reach maximum power 160W, please improve heat dissipation.
- Easy Operation A user manual will be included in package, which can help you easier to operate. The button can control ouput voltage ON/OFF status, and you can set the default output state is ON/OFF for the next time. The potentiometer can help you to adjust volt amp in a simple and fast way.
- Protection It has reverse-connect protection, short circuit protection and over current protection. When you connect the input wire reversely or short circuit, the module will not burn. And roate the CC potentiometer to set over current protection value you want.
- Application The volt conversion board can be used for 5v 6v 9v 12v 24V 30V 32V 3a 5a 10a devices, like solar panel, lab, experiment, RV, All-Terrain Vehicle, car, battery charger, LED stripes, etc.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Dimensions: 1.25 x 2.04 x 3.22 inches
See On Amazon #3
Wolfwhoop PW-D Control Buck Converter 6-24V to 5V 1.5A Step-Down Regulator Module Power Inverter Volt Stabilizer
Asin: B076P4C42B | Model: 5824093032 | PartNumber: 5824093032
It With A Super Mini Size: 17Mm * 5.5Mm.
This Voltage Step Down Module Is Designed For 2-6S Battery.
It Can Power For Transmitter And Receiver Or Mini Camera.
Voltage Buck: 6-24V In, 5V Out..
Features
- 4pcs PW-D
- Voltage buck: 6-24V in, 5V out.
- It with a super mini size: 17mm * 5.5mm
- It can power for transmitter and receiver or mini camera
- This voltage step down module is designed for 2-6S Battery
- See more on Amazon...
Brand: Wolfwhoop | Manufacturer: Wolfwhoop
Weight: 0.02 Pounds
See On Amazon #4
HiLetgo 2pcs LM2596 Adjustable DC-DC Step Down Buck Power Convert Module 4.0-40V Input to 1.25-37V Output with LED Voltmeter Display
Asin: B00LSEBYHU | Model: 3-01-0167 | PartNumber: 3-01-0167 | Ean: 0702082654835 | UPC: 702082654835
Output Voltage Range Of 1.25V ~ 37V.
4.0-40V To 1.25-37V Led Voltmeter.
Features
- LM2596 DC-DC Buck Step-down Power Converter Module
- 4.0-40V to 1.25-37V LED Voltmeter
- output voltage range of 1.25V ~ 37V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module
Asin: B08NV3JCBC | Model: LM2596 | PartNumber: LM2596 | Ean: 0701715453975 | UPC: 701715453975
Steps: Connect To Power Source, Adjust The Swirl Button On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage (The Factory Have Tested These At Max Voltage So They Are Very High By Default, Takes About 15-20 Turns Ccw Before The Voltage Starts Ramping Down).
Quantity: 5 Pieces; Size: 45 * 20 * 14 Mm.
Features: All Use Sanyo Solid-State Capacitors, 36 U Thickening Circuit Boards, High-Q Inductance With Led Indicator Output.
Output: Dc 1.5 V To 35 V Voltage Is Continuously Adjustable, Maximum Output Current Is 3 A.
Features
- Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost)
- Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A
- Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)
- Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output
- Quantity: 5 pieces; Size: 45 * 20 * 14 mm
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
See On Amazon #6
4 Pieces Adjustable LM2596S DC-DC Buck Converter Reduced Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display
Asin: B081N6WWJS | Model: Frienda-Power Converters-01 | PartNumber: Frienda-Power Converters-01
Easy To Use: With Terminal Block, No Soldering Iron Is Also Convenient To Use, And Retain The Wire Bond Point (The Input Voltage Must Be Higher Than The Voltage To Be Output By 1V Or More).
Nice Design: With 150Khz Internal Oscillation Frequency, Features Low Power Consumption And High Efficiency; When The Output Voltage Cannot Be Adjusted And Is Always Equal To The Input Voltage, Please Turn The Potentiometer Counterclockwise For More Than 10 Turns, And Then Use The Module To Adjust The Voltage Normally; This Is Because When The Module Leaves The Factory, The Default Output Voltage Is About 20V.
Output Current: The Maximum Output Current Can Be As High As 3A, The Recommended Working Current Is About 2A, More Than 2A Plus Heat Sink.
Simple To Operate: The Voltmeter Can Be Turned Off, And The Switch Can Be Turned Off By Pressing And Holding The Switch For More Than 1 Second And Less Than 4 Seconds, Once The Voltmeter Is Turned Off, Simply Press The Switch To Turn On The Voltmeter.
Features
- Product parameters: input voltage is 4.0V - 40V, output voltage is 1.25V - 37V, output current is 2A (normal and stable) and 3A max, conversion efficiency 92% (highest), output ripple under 30mV, switching frequency 150KHz, operating temperature is -45 to 85 degree Celsius
- Simple to operate: the voltmeter can be turned off, and the switch can be turned off by pressing and holding the switch for more than 1 second and less than 4 seconds, once the voltmeter is turned off, simply press the switch to turn on the voltmeter
- Easy to use: with terminal block, no soldering iron is also convenient to use, and retain the wire bond point (the input voltage must be higher than the voltage to be output by 1v or more)
- Output current: the maximum output current can be as high as 3A, the recommended working current is about 2A, more than 2A plus heat sink
- Nice design: with 150KHz internal oscillation frequency, features low power consumption and high efficiency; When the output voltage cannot be adjusted and is always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns, and then use the module to adjust the voltage normally; This is because when the module leaves the factory, the default output voltage is about 20V
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Weight: 0.20 Pounds
See On Amazon #7
UCTRONICS DC 9V 12V 24V to DC 5V 5A Buck Converter Module, 9-36V Step Down to USB 5V Transformer Dual Output Voltage Regulator Board [2 Pack]
Asin: B07XXWQ49N | Model: U6223 | PartNumber: U6223
High-Efficient Transformation: The Module Adopts The New Technology Synchronous Rectification, Which Improves Conversion Efficiency Obviously And Expands The Working Voltage And Current..
Application: As A Usb 5V Buck Converter, Diy A Phone Charger, Refit Car Charger, Supply Power To Raspberry Pi 4 B..
Mini And Portable: 63 X 2 X 10Mm, Suitable For Various Narrow Installation Space And Small Case..
Input Port: 5.5Mm×2.1Mm Dc Socket And Wiring Terminal, Each Way Makes The Module Work; Output Port: Usb And Wiring Terminal, Can Output Power At The Same Time..
Features
- Power Supply: DC 9-36V; Output Voltage: 5-5.3V; Output Power: 18W to 30W (input DC 9-24V, output 5.2V/6A; input DC 24-32V, output 5.2V/5A; input DC 32-36V, output 5.2V/3.5A)
- Input Port: 5.5mm 2.1mm DC socket and wiring terminal, each way makes the module work; Output Port: USB and wiring terminal, can output power at the same time.
- High-efficient Transformation: the module adopts the new technology synchronous rectification, which improves conversion efficiency obviously and expands the working voltage and current.
- Mini and Portable: 63 x 2 x 10mm, suitable for various narrow installation space and small case.
- Application: as a USB 5V buck converter, DIY a phone charger, refit car charger, supply power to raspberry pi 4 b.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.10 pounds
See On Amazon #8
BULVACK 10 Pack LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A
Asin: B07VVXF7YX | Model: ZT001 | PartNumber: ZT001 | Ean: 0745672639546 | UPC: 745672639546
All Solid Capacitors Using Sanyo.
High-Q Inductors With High Power Output Led Indicator.
36U Thick Circuit Boards.
Output: 1.25V To 30V Dc Voltage Is Continuously Adjustable, High Efficiency And Maximum Output Current Of 3A..
Features
- Input voltage range: DC 3.2V to 35V (input voltage must be higher than the voltage output to 1.5V or more can not be boosted.)
- Output: 1.25V to 30V DC voltage is continuously adjustable, high efficiency and maximum output current of 3A.
- All solid capacitors using SANYO
- 36u thick circuit boards
- High-Q inductors with high power output LED indicator
- See more on Amazon...
First Available: 07/27/2020
Brand: BULVACK | Manufacturer: Zixtec
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.29 Pounds
Warranty: No
See On Amazon #9
5Pack LM2596 LM2596S DC-DC Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Electronic Voltage Stabilizer Power Supply Module
Asin: B07PDGG84B | Model: NA | PartNumber: NA | Ean: 0682228946256 | UPC: 682228946256
★Easy Work: Convenient To Accurately Adjust The Output Voltage With A Mini Screwdriver..
★Application: Widely Used For Diy Mobile Power, Monitor Power Supply, Power Buggies,Communications Equipment Supply,Etc..
★Features: Thickened Circuit Boards,Short Circuit And Over-Temperature Protection..
★Output: Dc 1.5-35 V Voltage Is Continuously Adjustable, Maximum Output Current Is 3 A..
Features
- Input DC 3-40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
- Output: DC 1.5-35 V voltage is continuously adjustable, maximum output current is 3 A.
- Easy work: convenient to accurately adjust the output voltage with a mini screwdriver.
- Features: Thickened circuit boards,Short circuit and over-temperature protection.
- Application: widely used for DIY mobile power, monitor power supply, power buggies,communications equipment supply,etc.
- See more on Amazon...
First Available: 02/20/2023
Brand: Generic | Manufacturer: Does Not Apply
Warranty: 1 year
See On Amazon #10
DROK DC Buck Converter, 6-55V to 0-50V 8A 400W 6V 12V 24V 36V 48V Constant Voltage and Constant Current Buck Module, DC Regulated Power Supply, Stepdown Adjustable Voltage Regulator
Asin: B098347BD9
Protection --- Hardware Protection: Input Anti Reverse-Connect Protection And Output Short Circuit Protection. Software Protection: Over Voltage Protection(Ovp), Over Current Protection(Ocp), Over Power Protection(Opp), Over Temperature Protection(Otp), Input Low Voltage Protection(Lvp)..
Lcd Display --- The Module Status Reader Is Designed With Lcd Screen, Clear And Convenient..
Oah/Oph/Ohp Function --- When The Recorded Capacity/Energy/Operation Time Is Higher Than The Setting Maximum Capacity/Energy/Time, The Power Supply Will Automatically Turn Off Output, And "Oah"/"Oph"/"Ohp" Will Flash On The Screen..
Intelligent Cooling Fan --- When Temperature Is Over 50℃ Or Current Is Over 2A, The Fan Will Be Activated Automatically..
Features
- Adjustable Voltage & Current --- Input Voltage is 6.0-55V; Output Voltage is 0.0-50V; Output Current is 0.000A-8.100A; Output Power is 0-400W; can be arbitrary adjusted.
- Intelligent Cooling Fan --- when temperature is over 50 or current is over 2A, the fan will be activated automatically.
- Protection --- Hardware Protection: input anti reverse-connect protection and output short circuit protection. Software Protection: over voltage protection(OVP), over current protection(OCP), over power protection(OPP), over temperature protection(OTP), input low voltage protection(LVP).
- OAH/OPH/OHP Function --- when the recorded capacity/energy/operation time is higher than the setting maximum capacity/energy/time, the power supply will automatically turn off output, and OAH/OPH/OHP will flash on the screen.
- LCD Display --- the module status reader is designed with LCD screen, clear and convenient.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.29 Pounds
See On Amazon
Looking For Something Else?
Search