General purpose stub length carbide Drill, 3.7mm 3xD, 118 deg point, nano-FIREX coated
Asin: B07JK866JY | Model: 2463 3.700 | PartNumber: 2463 3.700 | Ean: 4031093352475
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- For use with general steel, quick milled steel, stainless steel, cast iron and aluminum .........
- See more on Amazon...
Brand: Guhring | Manufacturer: Guhring
See On Amazon Similar To General purpose stub length carbide
#1
Drill America-KFDRSD17/32 17/32" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Asin: B00AYZ2IYC | Model: KFDRSD17/32 | PartNumber: KFDRSD17/32 | Ean: 0887861036993 | UPC: 887861036993
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Heavy Duty 135 Degree Split Point.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Gold And Black Surface Treated For Use In Stainless Steel And Other Hard Metal Drilling.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Heavy duty 135 degree split point
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #2
Chicago Latrobe - 69900 157 Series High-Speed Steel Short Length Drill Bit Set with Metal Case 118 Degree Conventional Point, Inch, 29-piece, 1/16" - 1/2" in 1/64" increments
Asin: B004IPPH06 | Model: 69900 | PartNumber: 69900 | Ean: 0662355699003 | UPC: 662355699003
Uncoated (Bright) Finish Is An Untreated Surface That Can Be Used On A Range Of Materials, Especially Soft Metals.
Short Length Drill Bits Have The Strength And Rigidity Required For Heavy-Feed Rate Applications.
Made In The Usa.
118-Degree Conventional Point For A Range Of Drilling Applications.
High-Speed Steel (Hss) Provides Hardness For Wear Resistance.
Features
- Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
- High-speed steel (HSS) provides hardness for wear resistance
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
- 118-degree conventional point for a range of drilling applications
- Short length drill bits have the strength and rigidity required for heavy-feed rate applications
- Made in the USA
- See more on Amazon...
Brand: Chicago-Latrobe | Manufacturer: Greenfield Industries
Dimensions: 4.20 x 1.90 x 7.30 inches | Weight: 2.50 Pounds
See On Amazon #3
Drill America #21 High Speed Steel Split Point Stub Length Drill Bit (Pack of 12), DWDST Series
Asin: B00FXILMNS | Model: DWDST21P12 | PartNumber: DWDST21P12 | Ean: 0887861211123 | UPC: 887861211123
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Ideal For Portable Or Machine Drilling.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Ideal for portable or machine drilling
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #4
Chicago Latrobe 69881 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 15-Piece
Asin: B001VXYEKM | Model: 4EV07 | PartNumber: 4EV07 | Ean: 0662355698815 | UPC: 662355698815
High-Speed Steel (Hss) Provides Hardness For Wear Resistance.
118-Degree Conventional Point For A Range Of Drilling Applications.Made In The Usa.
Uncoated (Bright) Finish Is An Untreated Surface That Can Be Used On A Range Of Materials, Especially Soft Metals.
Left-Hand Helix For Counterclockwise Drilling And Broken Screw Removal.
Features
- Set of 15 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/32" increments
- Left-hand helix for counterclockwise drilling and broken screw removal
- High-speed steel (HSS) provides hardness for wear resistance
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
- 118-degree conventional point for a range of drilling applications.Made in the USA
- See more on Amazon...
Brand: Chicago-Latrobe | Manufacturer: Greenfield Industries
Dimensions: 4.10 x 1.30 x 7.70 inches | Weight: 2.00 Pounds
See On Amazon #5
KYOCERA 1820-0650.097 Series 1820 Stub Length Square End Mill, Carbide, Uncoated, 30 Degree Angle, 4 Flute, 0.0650" Cutting Diameter, 1/8" Shank Diameter, 0.097" Cutting Length, 1-1/2" Length
Asin: B01KPFLJK4 | Model: 1820-0650.097 | PartNumber: 1820-0650.097
For General Purpose Machining.
4 Flute.
First Available: 11/01/2017
Brand: KYOCERA | Manufacturer: Kyocera Precision Tools Inc.
See On Amazon #6
Chicago Latrobe 150L Left-Hand (Reverse) Flute High-Speed Steel Jobber Length Drill Bit Set, Uncoated, 118 Degree Conventional Point, 29-Piece
Asin: B000LEWILE | Model: 69876 | PartNumber: 69876 | Ean: 0662355698761 | UPC: 662355698761
High-Speed Steel (Hss) Provides Hardness For Wear Resistance.
118-Degree Conventional Point For A Range Of Drilling Applications.
Made In The Usa.
Uncoated (Bright) Finish Is An Untreated Surface That Can Be Used On A Range Of Materials, Especially Soft Metals.
Left-Hand Helix For Counterclockwise Drilling And Broken Screw Removal.
Features
- Set of 29 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments
- Left-hand helix for counterclockwise drilling and broken screw removal
- High-speed steel (HSS) provides hardness for wear resistance
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
- 118-degree conventional point for a range of drilling applications
- Made in the USA
- See more on Amazon...
Brand: Chicago-Latrobe | Manufacturer: Greenfield Threading
Dimensions: 1.97 x 8.86 x 4.21 inches | Weight: 2.00 pounds
See On Amazon #7
Niagara Cutter N89929 Carbide Ball Nose End Mill, Stub Length, TiAlN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 1.5" Overall Length, 0.125" Cut Diameter, 0.125" Shank Diameter
Asin: B003CYKMSG | Model: N89929 | PartNumber: N89929 | Ean: 0698036899295 | UPC: 698036899295
Features
- 4 flute design for creating finer finishes and a highter metal removal rate^General purpose end mill for working all types of materials^Made of extra-fine grade carbide for ultra high transverse rupture strength^Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity^Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications
- See more on Amazon...
Brand: Niagara Cutter | Manufacturer: Niagara Cutter
See On Amazon #8
Micro 100 BMR-015-2 Ball End Mill, 1/64" Cutter Dia, 045" LOC, 2 Fl, 1/8" Shank Dia, 1-1/2" OAL, Uncoated
Asin: B00Q8LDQ7E | Model: BMR-015-2 | PartNumber: BMR-015-2 | Ean: 0728709121719 | UPC: 728709121719
Center Cutting.
Altin Coating Option For Added Lubricity And Increased Wear Resistance In Difficult-To-Machine Materials.
Ball Profile.
30 Deg Helix.
Features
- Designed for general purpose machining
- 30 deg helix
- Center cutting
- Ball profile
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.01 pounds
See On Amazon #9
Niagara Cutter N89709 Carbide Square Nose End Mill, Double End, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 2.5" Overall Length, 0.250" Cut Diameter, 0.250" Shank Diameter
Asin: B003BIEX5G | Model: N89709 | PartNumber: N89709 | Ean: 0698036897093, 6241170000108 | UPC: 698036897093
Stub Length Is Used In Applications With Shallow Depth Of Cut To Increase The Strength Of The Cutting Edge And Reduce The Risk Of Breakage.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Titanium Aluminum Nitride (Tialn) Coating Lubricates The End Mill For High-Temperature Stability And Abrasion Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Tin And Ticn Coatings.
Double-End Square Nose End Mills Create Sharp, Unrounded Cuts And Have Cutting Edges On Both Ends For Longer Tool Life.
Features
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Double-end square nose end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Stub length is used in applications with shallow depth of cut to increase the strength of the cutting edge and reduce the risk of breakage
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: Niagara Cutter | Manufacturer: Niagara Cutter
See On Amazon #10
RedLine Tools - 5/32 (.1563) Stub Length Drill Bit, AlTiN Coated, 5/32 (.1563) Shank Diameter, 135 Point Angle.8750 Flute Length - RD22110
Asin: B00PHXWK5S
135° Split Point, 15° Helix.
Self Centering.
Ideal For Shallow Holes.
General Purpose Application.
Features
- 3-5X the penetration of HSS drills
- General Purpose Application
- 135 Split Point, 15 Helix
- Ideal for shallow holes
- Self Centering
- See more on Amazon...
Brand: RedLine Tools | Manufacturer: RedLine Tools
Weight: 0.03 pounds
See On Amazon #11
Micro 100 RMEM-004-2 Square End Mill, 0.4 mm Cutter Dia, 1.2 mm LOC, 2 Fl, 3 mm Shank Dia, 38 mm OAL, Uncoated
Asin: B00QCL48Q8 | Model: RMEM-004-2 | PartNumber: RMEM-004-2 | Ean: 0728709169582 | UPC: 728709169582
30 Deg Helix.
Square Profile.
Center Cutting.
Cutter Diameter Down To .005".
Features
- Designed for general purpose micromachining
- Cutter diameter down to .005
- 30 deg helix
- Center cutting
- Square profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.01 pounds
See On Amazon #12
RedLine Tools - 11/32 (.3438) Stub Length Drill Bit, AlTiN Coated, 11/32 (.3438) Shank Diameter, 135 Point Angle, 1.3750 Flute Length - RD22122
Asin: B00PHXWX1O
135° Split Point, 15° Helix.
Self Centering.
Ideal For Shallow Holes.
General Purpose Application.
Features
- 3-5X the penetration of HSS drills
- General Purpose Application
- 135 Split Point, 15 Helix
- Ideal for shallow holes
- Self Centering
- See more on Amazon...
Brand: RedLine Tools | Manufacturer: RedLine Tools
Weight: 0.12 pounds
See On Amazon #13
Chicago Latrobe 120 High-Speed Steel Long Length Drill Bit, Black Oxide Finish, Round Shank, 118 Degree Conventional Point, Wire Size #11 (Pack of 1)
Asin: B00271DU9I | Model: 50301 | PartNumber: 50301 | Ean: 0662355503010 | UPC: 662355503010
Black Oxide Finish Reduces Wear While Promoting Chip And Coolant Flow On Ferrous Materials.
Round Shank Accommodates Most Drill Chucks.
Made In The Usa.
118-Degree Conventional Point For General-Purpose Drilling Applications.
High-Speed Steel (Hss) Provides Hardness For Wear Resistance.
Features
- Long length drill bit has an extended flute and overall length to drill deeper and reach farther than a jobber length drill bit
- High-speed steel (HSS) provides hardness for wear resistance
- Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials
- 118-degree conventional point for general-purpose drilling applications
- Round shank accommodates most drill chucks
- Made in the USA
- See more on Amazon...
Brand: Chicago-Latrobe | Manufacturer: Greenfield Industries
Dimensions: 0.39 x 6.50 x 0.40 inches | Weight: 0.04 pounds
See On Amazon #14
YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2" Overall Length, 0.140625" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080BFUAQ | Model: 33560TF | PartNumber: 33560TF
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Titanium Aluminum Nitride (Tialn) Coating Lubricates The End Mill For High-Temperature Stability And Abrasion Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Uncoated Finish, Tin Coating, And Ticn Coating.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Suitable For General-Purpose Machining On Steel, Chromium-Nickel Steel, And Malleable Cast Iron.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Four flutes produce a better finish than fewer flutes
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #15
3/32" 3F Solid Carbide Ball End Mill - Stub
Asin: B006Q4YJN8
Length Of Cut: 3/16".
Ball End / Stub Length.
Overall Length: 1-1/2".
Shank Diameter: 1/8".
Features
- Mill Diameter: 3/32"
- Shank Diameter: 1/8
- Length of Cut: 3/16
- Overall length: 1-1/2
- Ball End / Stub Length
- See more on Amazon...
Brand: Star USA | Manufacturer: Star USA
See On Amazon #16
YG-1 E5066 Carbide Square Nose End Mill, TIALN Multilayer Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 2" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0080C9NMG | Model: 85565TF | PartNumber: 85565TF
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Titanium Aluminum Nitride (Tialn) Coating Lubricates The End Mill For High-Temperature Stability And Abrasion Resistance At High Cutting Speeds, Offering Better Heat Resistance Than Tin And Ticn Coatings.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for general-purpose machining on materials such as stainless steel and nickel-based alloys
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #17
1/2 Carbide End Mill, Ball Nose, Double Ended, 4 Flutes, Stub Length, USA Made (.5" Solid Carbide End Mill) 58382
Asin: B079X3CNHY
For General Purpose Milling, Right Hand Spiral, Right Hand Cut.
Ball End (Full Radius).
Center Cutting (Can Be Used To Drill Holes).
C2 Micrograin Carbide.
Features
- 5/8" Flute Length, 3" Overall Length, 1/2" Shank Diameter
- C2 Micrograin Carbide
- For General Purpose Milling, Right Hand Spiral, Right Hand Cut
- Center Cutting (can be used to drill holes)
- Ball End (Full Radius)
- See more on Amazon...
Brand: Super Tool | Manufacturer: Super Tool
Dimensions: 0.50 x 3.00 x 0.50 inches | Weight: 0.30 pounds
See On Amazon #18
Micro 100 BEM-046-04X Ball End Mill, 0468" Cutter Dia, 7/64" LOC, 4 Fl, 1/8" Shank Dia, 1-1/2" OAL, AlTiN
Asin: B00Q8N4UOU | Model: BEM-046-04X | PartNumber: BEM-046-04X | Ean: 0728709120132 | UPC: 728709120132
Center Cutting.
Altin Coating Option For Added Lubricity And Increased Wear Resistance In Difficult-To-Machine Materials.
Ball Profile.
30 Deg Helix.
Features
- Designed for general purpose machining
- 30 deg helix
- Center cutting
- Ball profile
- AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials
- See more on Amazon...
First Available: 03/12/2017
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Dimensions: 0.25 x 1.75 x 0.25 inches | Weight: 0.01 pounds
See On Amazon #19
Micro 100 SME-020-2 Square End Mill, 020" Cutter Dia, 030" LOC, 2 Fl, 1/8" Shank Dia, 1-1/2" OAL, Uncoated
Asin: B00QCMG0F4 | Model: SME-020-2 | PartNumber: SME-020-2 | Ean: 0728709181089 | UPC: 728709181089
30 Deg Helix.
Square Profile.
Center Cutting.
Cutter Diameter Down To .005".
Features
- Designed for general purpose micromachining
- Cutter diameter down to .005
- 30 deg helix
- Center cutting
- Square profile
- See more on Amazon...
First Available: 03/12/2017
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Dimensions: 0.50 x 2.50 x 0.50 inches | Weight: 0.01 pounds
See On Amazon #20
Micro 100 RME-015-2 Square End Mill, 1/64" Cutter Dia, 045" LOC, 2 Fl, 1/8" Shank Dia, 1-1/2" OAL, Uncoated
Asin: B00QCKYGXE | Model: RME-015-2 | PartNumber: RME-015-2 | Ean: 0728709169100 | UPC: 728709169100
30 Deg Helix.
Square Profile.
Center Cutting.
Cutter Diameter Down To .005".
Features
- Designed for general purpose micromachining
- Cutter diameter down to .005
- 30 deg helix
- Center cutting
- Square profile
- See more on Amazon...
Brand: Micro 100 | Manufacturer: Micro 100 Tool Corporation
Weight: 0.01 pounds
See On Amazon
Looking For Something Else?
Search