Amana Tool 45780-K SC Spektra Extreme Tool Life Coated V Groove Engraving 15 Deg x 3/16 D x 1/2 CH x 1/4 SHK x 2 Inch Long Router Bit
Asin: B07KFLCRQY | Model: 45780-K | PartNumber: 45780-K | Ean: 0738685804575 | UPC: 738685804575
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Specifications: Diameter (D): 3/16 Angle (A): 7.5 Cutting Height (B): 1/2 Shank (D): 1/4 Overall Length (L): 2 Flutes: 2 D1: 0.07".
Features
- Made in the USA
- SPECIFICATIONS: Diameter (D): 3/16 Angle (a): 7.5 Cutting Height (B): 1/2 Shank (d): 1/4 Overall Length (L): 2 Flutes: 2 D1: 0.07
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.04 pounds
See On Amazon Similar To Amana Tool 45780K SC Spektra
#1
Amana Tool 46202-K Solid Carbide Spiral Plunge Router Bit Down Cut 1/4 Dia x 3/4 x 1/4 Inch Shank, Spektra Extreme Tool Life Coated
Asin: B072J4CPQT | Model: 46202-K | PartNumber: 46202-K | Ean: 0738685446225 | UPC: 738685446225
Cut Clean – Use The Down-Cut Router Bit For Woodworking. Leaves A Smooth Edge On The Surface. Excellent Router Bit For Cutting Wood, Laminate, Melamine, Melamine Particle Board, Mdf, Veneered Plywood..
Industrial-Quality Tools – Amana Tool Is A Worldwide Leading Tool Provider With Usa-Based Corporate Headquarters And Warehouse, Specializing In Industrial-Quality Cutting Tools..
Solid Carbide – Special Solid Carbide Router Bits Made For Long-Lasting Cutting Edge Performance And Tool Life. Our Spektra Bits Feature A Nanocomposite Coating With Extreme Nanohardness And Heat Resistance..
For Use With – Spiral Router Bit Can Be Used With Handheld, Table-Mounted Portable Routers, And As Cnc Machine Router Bits..
Features
- SPIRAL PLUNGE BIT Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.
- FOR USE WITH Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.
- CUT CLEAN Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.
- SOLID CARBIDE Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
- INDUSTRIAL-QUALITY TOOLS Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: PROOK
Dimensions: 0.50 x 3.00 x 0.50 inches | Weight: 0.08 pounds
See On Amazon #2
Amana Tool 45624-K SC Spektra Extreme Tool Life Coated V-Groove 60 Deg x 1/4 D x 31/64 CH x 1/4 Inch SHK 3-Flute Router Bit
Asin: B07JDFKDMC | Model: 45624-K | PartNumber: 45624-K | Ean: 0738685456422 | UPC: 738685456422
Specifications: Diameter (D): 1/4 Angle (A): 60 Cutting Height (B): 31/64 Shank (D): 1/4 Overall Length (L): 2 B1: 7/32 Flutes: 3.
1/4 Inch Shank.
Features
- Made in USA
- 1/4 Inch Shank
- SPECIFICATIONS: Diameter (D): 1/4 Angle (a): 60 Cutting Height (B): 31/64 Shank (d): 1/4 Overall Length (L): 2 B1: 7/32 Flutes: 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #3
Amana Tool - 46225-K Solid Carbide Spiral Plunge Router Bit Down Cut 1/8 Dia x 13/16 x 1/4 Inch Shank, Spektra Extreme Tool Life Coated
Asin: B074RFPMC2 | Model: 46225-K | PartNumber: 46225-K | Ean: 0738685114629 | UPC: 738685114629
Cut Clean – Use The Down-Cut Router Bit For Woodworking. Leaves A Smooth Edge On The Surface. Excellent Router Bit For Cutting Wood, Laminate, Melamine, Melamine Particle Board, Mdf, Veneered Plywood..
Industrial-Quality Tools – Amana Tool Is A Worldwide Leading Tool Provider With Usa-Based Corporate Headquarters And Warehouse, Specializing In Industrial-Quality Cutting Tools..
Solid Carbide – Special Solid Carbide Router Bits Made For Long-Lasting Cutting Edge Performance And Tool Life. Our Spektra Bits Feature A Nanocomposite Coating With Extreme Nanohardness And Heat Resistance..
For Use With – Spiral Router Bit Can Be Used With Handheld, Table-Mounted Portable Routers, And As Cnc Machine Router Bits..
Features
- SPIRAL PLUNGE BIT Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.
- FOR USE WITH Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.
- CUT CLEAN Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.
- SOLID CARBIDE Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
- INDUSTRIAL-QUALITY TOOLS Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools.
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 pounds
See On Amazon #4
Amana Tool - 55229 Carbide Tipped 82 Countersink with Adjustable Depth Stop & No-
Asin: B00ECCNDBA | Model: 55229 | PartNumber: 55229 | Ean: 0738685552292 | UPC: 738685552292
(D) Diameter 3/8.
Overall Length (L) 2-5/8.
(D) Shank 1/4.
(B) Cutting Height 3/64-3/8.
Features
- (A ) angle 49
- (B) Cutting height 3/64-3/8
- (D) diameter 3/8
- (D) shank 1/4
- Overall length (L) 2-5/8
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 1.50 x 5.75 x 3.00 Inches | Weight: 0.00 Pounds
See On Amazon #5
Amana Tool 46170-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/4 D x 7/8 CH x 1/4 SHK x 2-1/2 Inch Long 2 Flute Router Bit
Asin: B072562878 | Model: 46170-K | PartNumber: 46170-K | Ean: 0738685994610 | UPC: 738685994610
(D) Shank: 1/4.
B1: 7Mm.
1 Amana Branded Tool.
Overall Length (L): 2-1/2.
(B) Cutting Height: 7/8.
Features
- (D) diameter: 1/4
- (B) Cutting height: 7/8
- (D) shank: 1/4
- Overall length (L): 2-1/2
- B1: 7mm
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.25 x 2.50 x 0.25 inches
See On Amazon #6
Amana Tool - 51411-K Solid Carbide CNC Spektra Extreme Tool Life Coated Spiral 'O' Flute
Asin: B072319D6D | Model: 51411-K | PartNumber: 51411-K | Ean: 0738685541111 | UPC: 738685541111
(B) Cutting Height: 1/2.
Overall Length (L): 2.
1 Amana Branded Tool.
(D) Shank: 1/4.
(D) Diameter: 1/8.
Features
- Direction: up-cut
- (D) diameter: 1/8
- (B) Cutting height: 1/2
- (D) shank: 1/4
- Overall length (L): 2
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.25 x 2.00 x 0.25 inches
See On Amazon #7
Amana Tool - 46102-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia
Asin: B07235NBKF | Model: 46102-K | PartNumber: 46102-K | Ean: 0738685461129 | UPC: 738685461129
(B) Cutting Height: 3/4.
Overall Length (L): 2-1/2.
(D) Shank: 1/4.
(D) Diameter: 1/4.
Features
- Direction: up-cut
- (D) diameter: 1/4
- (B) Cutting height: 3/4
- (D) shank: 1/4
- Overall length (L): 2-1/2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.50 x 3.00 x 0.50 inches
See On Amazon #8
Amana Tool - 46172-K (Previous# 46162) CNC Solid Carbide Spektra Extreme Tool Life C
Asin: B07F6NY9BS | Model: 46172-K | PartNumber: 46172-K | Ean: 0738685446171 | UPC: 738685446171
(D) Shank: 3/8.
B1: 9Mm.
1 Amana Branded Tool.
Overall Length (L): 3.
(B) Cutting Height: 1-1/4.
Features
- (D) diameter: 3/8
- (B) Cutting height: 1-1/4
- (D) shank: 3/8
- Overall length (L): 3
- B1: 9mm
- 1 Amana Branded Tool
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.60 x 3.50 x 0.60 Inches | Weight: 0.00 pounds
See On Amazon #9
Amana Tool - 46280-K CNC 2D & 3D Carving 6.2 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/6
Asin: B074C5FN6C | Model: 46280-K | PartNumber: 46280-K | Ean: 0738685004623 | UPC: 738685004623
(A°) Angle: 6.2°.
(D) Shank: 1/4.
(B) Cutting Height: 1.
(R) Radius: 1/64.
Features
- (D) diameter: 1/32
- (R) radius: 1/64
- (A ) angle: 6.2
- (B) Cutting height: 1
- (D) shank: 1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #10
Amana Tool - 46473 CNC 2D & 3D Carving 6.2 Deg Tapered Angle Ball Tip x 0.5mm Dia x 0.25
Asin: B07BRZDQ5J | Model: 46473 | PartNumber: 46473 | Ean: 0738685464731 | UPC: 738685464731
Helps To Prevent The Build-Up Of Material In The Flutes While Cutting Have The Tendency To Run/Spin Much Faster Than An Uncoated Tool..
Reduces Chatter (Where The Machine Or Work Piece Vibrates) Under High Chip Loads (When Used With Low Tir Spindles)..
Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding..
Benefits Of Zirconium Nitride (Zrn) Coating Creates A Harder And Tougher Cutting Edge Allows For A Prolonged Cutting Edge Life..
Features
- Made in the USA. Solid Carbide.
- Benefits of Zirconium Nitride (ZrN) Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life.
- Helps to prevent the build-up of material in the flutes while cutting Have the tendency to run/spin much faster than an uncoated tool.
- Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding.
- Reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #11
Amana Tool - 47150 Carbide Tipped No-File Trim .059 Radius x 1/2 Dia x 3/8 x 1/4" Shan
Asin: B000637V9E | Model: 47150 | PartNumber: 47150 | Ean: 0732454783740, 0738685471500 | UPC: 738685471500, 732454783740
Cutting Height (B) 3/8.
Overall Length (L) 1-7/8.
Shank (D) 1/4.
Radius (R) .059 (1.5Mm).
Features
- Diameter (D) 1/2
- Radius (R) .059 (1.5mm)
- Cutting height (B) 3/8
- Shank (D) 1/4
- Overall length (L) 1-7/8
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 2.00 x 0.80 x 0.80 Inches
See On Amazon #12
Amana Tool - 46020-K CNC Solid Carbide Spektra Extreme Tool Life Coated Mortise Compressio
Asin: B0721453WD | Model: 46020-K | PartNumber: 46020-K | Ean: 0738685446621 | UPC: 738685446621
(D) Shank: 3/8.
B1: 3/16.
Overall Length (L): 3.
(B) Cutting Height: 1.
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #13
Amana Tool - 46376-K Solid Carbide Spektra Extreme Tool Life Coated Up-Cut Ball Nose Spira
Asin: B078ZG4M4S | Model: 46376-K | PartNumber: 46376-K | Ean: 0738685463772 | UPC: 738685463772
(R) Radius: 1/8.
(D) Shank: 1/4.
(B) Cutting Height: 1.
(D) Diameter: 1/4.
Features
- Direction: up-cut
- (D) diameter: 1/4
- (R) radius: 1/8
- (B) Cutting height: 1
- (D) shank: 1/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #14
Amana Tool - 45705 Carbide Tipped V-Groove 60 Deg x 1/2 Dia x 5/8 x 1/4" Shank
Asin: B000K29UBS | Model: 45705 | PartNumber: 45705 | Ean: 0738685857052 | UPC: 738685857052
Cutting Height (B) 5/8.
Overall Length (L) 1-3/4.
Shank (D) 1/4.
Angle (A°) 60°.
Features
- Diameter (D) 1/2
- Angle (a ) 60
- Cutting height (B) 5/8
- Shank (D) 1/4
- Overall length (L) 1-3/4
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #15
Amana Tool 46054-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 1 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut 3 Flute Router Bit
Asin: B08P2FMYNN | Model: 46054-K | PartNumber: 46054-K | Ean: 0738685460542 | UPC: 738685460542
Specifications: Direction: Up-Cut (D) Diameter: 1/4 (B) Cutting Height: 3/4 (D) Shank: 1/4 Overall Length (L): 2-1/2 Flutes: 2.
Features
- Made in the USA
- SPECIFICATIONS: Direction: Up-Cut (D) Diameter: 1/4 (B) Cutting Height: 3/4 (d) Shank: 1/4 Overall Length (L): 2-1/2 Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #16
Amana Tool - 46321 Solid Carbide Spiral Plunge 1/4 Dia x 1-1/4 x 1/4" Shank Up-Cut
Asin: B01KJHT6YY | Model: 46321 | PartNumber: 46321 | Ean: 0738685463215 | UPC: 738685463215
(B) Cutting Height 1-1/4.
Overall Length (L) 3.
(D) Shank 1/4.
(D) Diameter 1/4.
Features
- Direction up-cut
- (D) diameter 1/4
- (B) Cutting height 1-1/4
- (D) shank 1/4
- Overall length (L) 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #17
Amana Tool 51478-Z CNC SC Spiral O Single Flute ZrN Coated Aluminum Cutting 3/16 D x 5/8 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish
Asin: B07GBG9QMP | Model: 51478-Z | PartNumber: 51478-Z | Ean: 0738685785140 | UPC: 738685785140
Specifications: Direction: Up-Cut (D) Diameter: 3/16 (B) Cutting Height: 5/8 (D) Shank: 1/4 Overall Length (L): 2 Flutes: 1 Surface Coating: Zrn.
Advantages Of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up/Galling Of Material In The Flutes While Cutting Pvd Ceramic Hardcoat Designed For Soft, Gummy And Abrasive Materials High As.
Features
- Made in the USA
- Advantages of ZrN Coating: Creates incredibly precise detail work Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting PVD ceramic hardcoat designed for soft, gummy and abrasive materials High as
- SPECIFICATIONS: Direction: Up-Cut (D) Diameter: 3/16 (B) Cutting Height: 5/8 (d) Shank: 1/4 Overall Length (L): 2 Flutes: 1 Surface Coating: ZrN
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #18
Amana Tool 46176-K CNC SC Spektra Extreme Tool Life Coated Compression Spiral 1/8 D x 13/16 CH x 1/4 SHK x 2-1/2 Inch Long Router Bit
Asin: B07MXHH2GB | Model: 46176-K | PartNumber: 46176-K | Ean: 0738685004616 | UPC: 738685004616
Specifications: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (D) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: Naco Ceramic Coating Flutes: 2.
Solid Carbide.
Features
- Made in the USA
- Solid Carbide
- SPECIFICATIONS: (D) Diameter: 1/8 (B) Cutting Height: 13/16 (d) Shank: 1/8 Overall Length (L): 2-1/2 B1: 7/32 Type: nACo Ceramic Coating Flutes: 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.06 pounds
See On Amazon #19
Amana Tool - 45792 Carbide Tipped Double Edge Folding V-Groove 90 Deg x 0.090" Tip Wid
Asin: B003DCIUV8 | Model: 45792 | PartNumber: 45792 | Ean: 0738685457924 | UPC: 738685457924
Cutting Height (B) 3/8.
Overall Length (L) 2.
Shank (D) 1/4.
Angle (A°) 90°.
Features
- Diameter (D) 1/2
- Angle (a ) 90
- Cutting height (B) 3/8
- Shank (D) 1/4
- Overall length (L) 2
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.04 Pounds
See On Amazon #20
Amana Tool - 46297 Solid Carbide UltraTrim Spiral Trim 1/4 Dia x 1" 4 Shank with D
Asin: B000P4UQJQ | Model: 46297 | PartNumber: 46297 | Ean: 0738685462973 | UPC: 738685462973
Cutting Height (B) 1.
Overall Length (L) 3.
Shank (D) 1/4.
Diameter (D) 1/4.
Features
- Direction down-cut
- Diameter (D) 1/4
- Cutting height (B) 1
- Shank (D) 1/4
- Overall length (L) 3
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon
Looking For Something Else?
Search