Taidacent 1pcs servo stepper dc motor driver controller smart car H bridge 3-25V 90A strong brake
Asin: B07KQT6K4L | Model: HMD-02A | PartNumber: HMD-02A | Ean: 0681413647596 | UPC: 681413647596
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Driver Chip Uses A Mos Tube To Drive The Motor, And The Heat Is Extremely Low.
The Motor Drive Module Uses The H-Bridge Circuit To Drive The Motor, Which Can Control The Motor Forward And Reverse;.
Driver Chip Output, With Low Internal Resistance, Large Driving Current, Good Acceleration And Braking Effect.
An Isolation Circuit Is Installed Between The Driving Chip And The Control Signal To Effectively Protect The Single Chip Microcomputer.
Features
- the supply voltage: 9V ~ 24V
- An isolation circuit is installed between the driving chip and the control signal to effectively protect the single chip microcomputer
- The driver chip uses a MOS tube to drive the motor, and the heat is extremely low
- Driver chip output, with low internal resistance, large driving current, good acceleration and braking effect
- The motor drive module uses the H-bridge circuit to drive the motor, which can control the motor forward and reverse;
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon Similar To Taidacent 1pcs servo stepper dc
#1
V TELESKY 2PCS DC-DC MP2482 SY8205 5A DC Step-Down Module Servo Drive Power Board 7V-24V to 5V
Asin: B0D4TRTQH4
Adopting Synchronous Rectification For Higher Efficiency.
High Current And Large Packaging Inductance, Further Reducing Heat Generation.
The Capacitor Adopts A Large Capacity Ceramic Chip Capacitor, Which Is Not Easily Damaged And Has Lower Heat Generation.
Servo Power Drive, Can Be Directly Connected To The Servo, And Can Be Used As A Power Module When Disconnected..
Features
- 5V voltage reduction module: SY8205
- Servo power drive, can be directly connected to the servo, and can be used as a power module when disconnected.
- Adopting synchronous rectification for higher efficiency
- The capacitor adopts a large capacity ceramic chip capacitor, which is not easily damaged and has lower heat generation
- High current and large packaging inductance, further reducing heat generation
- See more on Amazon...
Brand: V TELESKY | Manufacturer: V TELESKY
See On Amazon #2
Beffkkip 4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat
Asin: B07MLR1498 | Model: 4 X SG90 Servo | PartNumber: 4 X SG90 Servo | Ean: 0608603912258 | UPC: 608603912258
Operating Voltage: 4.8-6V..
Application: Used For Fixed-Wing, Helicopter, Kt, Glider, Small Robot, Robotic Arm And Other Models..
Small Size And Light Weight..
Operating Speed: 0.1Second/ 60Degree ( 4.8V No Load)..
Features
- Beffkkip High quality and high cost performance.
- Operating speed: 0.1second/ 60degree ( 4.8V no load).
- Operating voltage: 4.8-6V.
- Small size and light weight.
- Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
- See more on Amazon...
Brand: Beffkkip | Manufacturer: Deegoo-FPV
See On Amazon #3
ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY,RC car (Control Angle 180 )
Asin: B07SBYZ4G5 | Model: 35 | PartNumber: 35 | Ean: 0743307804802, 0703145657589 | UPC: 743307804802, 703145657589
Copper & Aluminum / Stainless Steel & Aluminum.
Cnc Aluminium Middle Shell,Dual Ball Bearings.
High Performance Digital Standard Servo,High-Precision Metal Gears （Stainless Steel Gear）With Hard Anodizing.
High Reliability、Good Stability、Strong Adaptability, Low Noise、Small Vibration、Smooth Operation、Long Life.
Features
- DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
- High reliability good stability strong adaptability, Low noise small vibration smooth operation long life
- Copper & Aluminum / Stainless Steel & Aluminum
- High performance digital standard servo,High-precision metal gears Stainless steel gear with hard anodizing
- CNC aluminium middle Shell,Dual ball bearings
- See more on Amazon...
Brand: ZOSKAY | Manufacturer: 35
Warranty: 90 Day Warranty Against Manufacturer Defects
See On Amazon #4
Smraza 10 Pcs SG90 9G Micro Servo Metal Geared Motor Kit for RC Robot Arm/Hand/Control with Cable, Mini Servos for Arduino Project (10)
Asin: B07L2SF3R4
Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm). Dead Band Setting: 5 Ms.
Please Note: The Starting Current Of The Motor Should Be Greater Than 1A. Comes With 1 Year Warranty And Lifetime Technical Support.
Amplifier Type: Analog Controller. Operating Voltage: 4.8V～6.0V.
Interface Type: Compatible With Jr & Futaba Interface. Running Speed (At No Load): 0.09 ± 0.01 Sec/60°(4.8V ) 0.08 ± 0.01 Sec/60°(6V). Running Angle: 180 Degree.
Features
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi
- Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 0.01 sec/60 (4.8V ) 0.08 0.01 sec/60 (6V). Running angle: 180 degree
- Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 5 ms
- Amplifier Type: Analog controller. Operating Voltage: 4.8V 6.0V
- Please Note: The starting current of the motor should be greater than 1A. Comes with 1 year warranty and lifetime technical Support
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
Dimensions: 0.10 x 0.98 x 1.60 inches | Weight: 0.35 Pounds
See On Amazon #5
ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, DS3218MG,Control Angle 270 Red
Asin: B076CNKQX4 | Model: DS3218 | PartNumber: DS3218 | Ean: 0601263451471 | UPC: 601263451471
▶High Quality - Equipped With Strong Copper & Aluminum Gears,Cnc Aluminium Middle Shell.
▶Dimensions - 1.58X0.79X1.60Inch (40X20x40.5Mm);Weight: 60G (2.12Oz) Only.
▶High Rotation - Well-Controlled, 270 Degree Rotation. 360 Degree Rotation When Power-Off, Perfect For Robot Joint Activities.
▶Large Torque - Maximum Torque Is Up To 21.5 Kg/Cm (298.5 Oz/In)@6.8V.
Features
- Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof
- Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V
- High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell
- High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities
- Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only
- See more on Amazon...
Brand: ANNIMOS | Manufacturer: DS SERVO
Dimensions: 0.79 x 1.57 x 1.59 inches | Weight: 0.13 pounds
See On Amazon #6
ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board Compatible with Arduino
Asin: B01CP18J4A | Model: EL-SM-003 | PartNumber: EL-SM-003 | Ean: 0746591610357 | UPC: 746591610357
5 Line 4 Phase Can Be Used For Ordinary Uln2003 Chip Driver, Connect To The 2 Phase , Support The Development Board，With Convenient Use, Direct Docking.
Great Packing In A Box : 5 Set Uln2003 Stepper Motor + Driver Board (With A Little Gift).
Drive Module Board Size(In): 1.37*1.18*0.6 ; Stepper Motor Diameter: 1.06(In) ; Stepper Motor Lines: 9.45(In).
A, B, C, D Four-Phase Led Indicates The Status Of The Stepper Motor Work..
Features
- Stepper motor with a standard interface, when used directly pluggable.
- A, B, C, D four-phase LED indicates the status of the stepper motor work.
- 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board With convenient use, direct docking
- Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
- Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board (with a little gift)
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 2.00 x 5.00 x 5.00 Inches
See On Amazon #7
4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter
Asin: B07NQJ1VZ2 | Model: 4Pcs MG995 Metal Gear Servo | PartNumber: 4Pcs MG995 Metal Gear Servo
Torque At 6V 12Kg/Cm, 7.2V 13Kg/Cm. Positioning Speed At 4.8V Without Load 0.17S / 60 Degrees;6.0V Without Load 0.13S / 60 Degrees..
This Servo Offers A Full Range Of 180° With Metal Gears. Application:Rc Robot, Airplane Control, Robot Arm And Boats. Fit For All Kind Of R/C Toys And Arduino Experiments..
Connector Wire Length 300Mm. Stable And Shock Proof Double Coreless Motor, Metal Gear, Ball Bearing Design,Through External Adapter..
This High-Speed Standard Servo Motor Can Rotate 180 Degrees (90 In Each Direction)..
Features
- Good performance digital standard Deegoo-FPV servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees.
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
- This servo offers a full range of 180 with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
Dimensions: 1.38 x 2.20 x 1.93 inches | Weight: 0.60 Pounds
See On Amazon #8
Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control
Asin: B07Q6JGWNV | Model: 15714-1 | PartNumber: 15714-1 | Ean: 0701715541276 | UPC: 701715541276
Sg90 Servo Motor Compatible With The Project Like Robot Arm/ Robot Hand/ Control The Servo With Potentiometer/ Multi Servo Control..
Sg90 9G Micro Servo Motor For Remote Control Helicopters, Micro Robot, Robot Arm And Boats..
The Sg90 Has 3 Wire Interfaces In Which The Connections Should Be Made As Follows: Red Wire-5V, Brown Wire-Ground, Yellow Wire-Digital Pin 9..
Mini Servo Sg90 Is Tiny And Lightweight With High Output Power..
Features
- 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
- Mini servo SG90 is tiny and lightweight with high output power.
- SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.
- The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #9
12PCS SG90 Micro Servo Motor, Dorhea Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control
Asin: B08FJ27Q1H | Model: 13582-1 | PartNumber: 13582-1
Compatible With The Project Like Robot Arm/ Robot Hand/ Control The Servo With Potentiometer/ Multi Servo Control..
Sg90 9G Micro Servo Motor For Remote Control Helicopters, Micro Robot, Robot Arm And Boats..
The Sg90 Has 3 Wire Interfaces In Which The Connections Should Be Made As Follows: Red Wire-5V, Brown Wire-Ground, Yellow Wire-Digital Pin 9..
It Is Tiny And Lightweight With High Output Power..
Features
- 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm); Operating voltage: 3.0V~ 6V; Temperature range: -30 to +60; Dead band width: 7usec.
- It is tiny and lightweight with high output power.
- Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control.
- The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9.
- SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #10
HiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
Asin: B00LPK0E5A | Model: 3-01-0153 | PartNumber: 3-01-0153 | Ean: 0702082654729 | UPC: 702082654729
Diameter: 28Mm.
Speed Down Stepping Motor.
Voltage: 5V.
Stepping Angle: 5.625 X 1/64.
Features
- HiLetgo Stepper Motor+ Driver Board
- Stepping angle: 5.625 X 1/64
- Diameter: 28mm
- Voltage: 5V
- Speed down stepping motor
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
DC 5-30V CNC Stepper Motor Controller,PEMENOL 1/128 Micro-Step Resolution Forward Reverse Delay Time Angle Speed Adjustable Stepper Motor Control Module with HD Display Suit for Nema17/23 Motor
Asin: B0BK1GYBR1 | Model: GY20752 | PartNumber: GY20752
9 Operating States: Pemenol Stepping Motor Controller Has 9 Built-In Fixed Working Modes, Including Forward Rotation, Reverse Rotation, Delay, Cycle, Etc., So You Can Select The Working Mode More Quickly. In Addition To The Built-In Parameter Working Mode, You Can Also Control Through External Buttons Or Other Drives..
Forward And Reverse Rotation: Pemenol Stepper Motor Controller Can Change The Direction Of Motor Rotation By Pressing A Button, And You Can Also Select Two Modes, Automatic Or Manual, By Selecting The Working Mode, Which Is More Widely Used..
13 Kinds Of Menu Setting Functions: Pemenol Stepper Motor Controller Including Cycle Number, Motor Turns, Delay Time, Number Of Pulses, Forward Speed, Flip Speed, Etc. The External Buttons And Knob Encoder Make It Very Easy To Set The Parameters..
Hd Lcd Display: Pemenol Stepper Motor Controller Has A Hd Lcd Display, So You Can Read The Parameters Very Easily And Set Various Parameters More Precisely. The Module Also Has A Power Failure Memory Function To Prevent Your Parameters From Being Lost..
Various Functions: Pemenol Stepper Motor Controller Can Adjust The Angle, Speed, Direction And Delay Time Of The Motor. The Micro Stepping Resolution Can Reach 1/128, Enabling You To Control The Motor More Accurately. Note: This Product Is A Stepper Motor Controller, Which Needs To Be Used With The Driver..
Features
- CAN NOT DRIVE THE MOTOR ALONE: This module is a stepper motor controller. It CANNOT directly control the stepper motor. It needs to connect a stepper motor DRIVER(NOT INCLUDED)to control the motor.
- VARIOUS FUNCTIONS: PEMENOL stepper motor controller can adjust the angle, speed, direction and delay time of the motor. The micro stepping resolution can reach 1/128, enabling you to control the motor more accurately. NOTE: This product is a stepper motor controller, which needs to be used with the driver.
- 9 OPERATING STATES: PEMENOL stepping motor controller has 9 built-in fixed working modes, including forward rotation, reverse rotation, delay, cycle, etc., so you can select the working mode more quickly. In addition to the built-in parameter working mode, you can also control through external buttons or other drives.
- HD LCD DISPLAY: PEMENOL stepper motor controller has a HD LCD display, so you can read the parameters very easily and set various parameters more precisely. The module also has a power failure memory function to prevent your parameters from being lost.
- FORWARD AND REVERSE ROTATION: PEMENOL stepper motor controller can change the direction of motor rotation by pressing a button, and you can also select two modes, automatic or manual, by selecting the working mode, which is more widely used.
- 13 KINDS OF MENU SETTING FUNCTIONS: PEMENOL stepper motor controller including cycle number, motor turns, delay time, number of pulses, forward speed, flip speed, etc. The external buttons and knob encoder make it very easy to set the parameters.
- See more on Amazon...
Brand: PEMENOL | Manufacturer: PEMENOL
Dimensions: 1.02 x 3.11 x 1.60 inches
See On Amazon #12
2PCS AGFRC Micro 9g Servo Servo Motor Kit - Digital 11g Metal Gear Mini Servo for RC Helicopter Airplane Boat Controls, Control Angle 180
Asin: B07V5XR55Q | Model: B11DLS | PartNumber: B11DLS | Ean: 0671072398106 | UPC: 671072398106
▶Ultra Light 13G, Size 23*12.1*23.8Mm.
▶Genuine Agf Brand Package. Any Question Please Contact Us At First Time.
▶Stall Torque: 2.2Kg.Cm @ 4.8V,2.8Kg.Cm @ 6.0V.
▶Ideal For Robot Plane Helicopter Boat Car.
Features
- High precision metal gears Micro Servo
- Ideal for robot Plane Helicopter Boat Car
- Ultra Light 13g, Size 23*12.1*23.8mm
- Stall Torque: 2.2kg.cm @ 4.8V,2.8kg.cm @ 6.0V
- Genuine AGF Brand package. Any question please contact us at first time
- See more on Amazon...
Brand: AGFRC | Manufacturer: AGF-RC Electronic Technology CO.,Ltd
Dimensions: 0.94 x 0.91 x 0.48 inches | Weight: 0.03 pounds
See On Amazon #13
GOUP RC 21G Micro Digital Full Metal Gear Micro Servo with 25T Servo Arm for 1/14 1/16 1/18 RC Crawler Car Upgrade Servo Parts Model Boat Airplane Robot 1PC
Asin: B0CZ6MF61R
❸▶ Ip66 Waterproofness：Reliable Waterproof Performance, Novel Appearance Design, The Best Choice For Your Upgrade..
❺▶Widely Use : This Digital Servo Can Be Widely Used For Robots,Mechanical Arms, 1/18, 1/16, 1/14 Truck, Rc Car,Remote Control Boat,Remote Control Aircraf Etc Accessories Upgrades..
❹▶ Product Composition：21G Micro Servo*1 ,25T Metal Servo Arm*1..
❷▶ Excellent Performance：Adopt Precision Gear Combination (Responsive, Smooth And Delicate), Faster Corresponding Speed, Better Output Torque.Abs Material Shell: Faster Heat Dissipation. Temperature/Voltage/Blocking Protection Is More Durable..
Features
- Upgrade The 21G mini servo is suitable for micro RC cars, Micro servo is made of all metal gears, which is more durable than the plastic ones.
- Excellent Performance Adopt precision gear combination (responsive, smooth and delicate), faster corresponding speed, better output torque.ABS material shell: faster heat dissipation. Temperature/voltage/blocking protection is more durable.
- IP66 Waterproofness Reliable waterproof performance, novel appearance design, the best choice for your upgrade.
- Product Composition 21G micro Servo*1 ,25T metal Servo Arm*1.
- Widely Use : This digital servo can be widely used for robots,mechanical arms, 1/18, 1/16, 1/14 Truck, RC Car,remote control boat,remote control aircraf etc accessories upgrades.
- See more on Amazon...
Brand: GOUP RC | Manufacturer: GOUPRC
Dimensions: 0.51 x 0.33 x 0.06 inches
See On Amazon #14
Miuzei 5 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project
Asin: B07NSVKZP7 | Model: servo motors | PartNumber: servo motors | Ean: 0657390343417 | UPC: 657390343417
No Load Running Speed: 0.09±0.01 Sec/60° At 4.8V Rotary Angle: 120°.
Amplifier Type:Analog Controller Operating Voltage: 4.8V～6.0V.
Stall Torque (4.8V): 17.5Oz /In (1Kg/Cm).Dead Band Width: 7Usec.
Interface Type: Compatible With Jr & Futaba Interface..
Features
- Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments
- Interface Type: compatible with JR & Futaba interface.
- No Load Running Speed: 0.09 0.01 sec/60 at 4.8V Rotary Angle: 120
- Stall Torque (4.8V): 17.5oz /in (1kg/cm).Dead band width: 7usec
- Amplifier type:Analog controller Operating voltage: 4.8V 6.0V
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
See On Amazon #15
Miuzei MG90S 9G Micro Servo Motor Metal Geared Motor Kit for RC Car Robot Helicopter, Mini Servos for Arduino Project (5)
Asin: B0BWJ2CK9D | Model: ms90 srevo motor | PartNumber: ms90 srevo motor
Operating Voltage 4.8V~ 6V. Operating Temperature: 0°C ~ +55°C. Dead Zone Width：5 Microseconds.
Wide Applications: Tiny And Lightweight With High Output, This Mini Small Micro Servo Is Perfect For Rc Airplanes, Helicopters, Quadcopters,Boat, Car, Electronics Diy Or Robots..
Metal Gear: Aluminum Metal Teeth, Coreless Motor, Double Ball Bearin. Metal Gear With Less Noise For Added Strength And Durability..
Stall Torque: 2.0Kg/Cm(4.8V). Operating Speed: 0.11 Seconds/60 Degrees (4.8V)..
Features
- MG90S Micro Servo Motor, updated SG90 serve motor.
- Stall Torque: 2.0kg/cm(4.8V). Operating Speed: 0.11 seconds/60 degrees (4.8V).
- Operating Voltage 4.8V~ 6V. Operating Temperature: 0 C ~ +55 C. Dead Zone Width 5 Microseconds
- Metal Gear: Aluminum metal teeth, coreless motor, double ball bearin. Metal Gear with less noise for added strength and durability.
- Wide Applications: Tiny and lightweight with high output, this mini small micro servo is perfect for RC airplanes, helicopters, quadcopters,boat, car, electronics DIY or robots.
- See more on Amazon...
Brand: Miuzei | Manufacturer: Miuzei
Dimensions: 0.90 x 0.88 x 0.49 inches
See On Amazon #16
Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue
Asin: B09GFN98X9 | Model: C058-10 | PartNumber: C058-10 | Ean: 0761325160564 | UPC: 761325160564
[Operating Speed] 0.12 Second/ 60Degree ( 4.8V No Load), 0.1 Second / 60Degree ( 6.0V No Load), Max Rotation Angle:180 Degrees.
[Reminder] The Starting Current Of The Analog Servo Motor Must Be Greater Than 1A. Sg90 Servo Is An Analog Servo And Needs To Continuously Provide Pmw Signal To Work Normally.
[Stalling Torque] 17.5Oz/In (1Kg/Cm); Dead Zone Width: 7 Microseconds; Amplifier Type: Analog Controller; Working Voltage: 4.8V～6.0V.
[Interface Type] This Sg90 Servo Is Compatible With Jr & Futaba Interface.
Features
- [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project
- [Interface type] This SG90 servo is compatible with JR & Futaba interface
- [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees
- [Stalling torque] 17.5oz/in (1kg/cm); Dead zone width: 7 microseconds; Amplifier type: analog controller; Working voltage: 4.8V 6.0V
- [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 1.30 x 0.90 x 0.50 inches
See On Amazon #17
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
Asin: B072N4FMRN | Model: LKB02 | PartNumber: LKB02 | Ean: 8414771507439
★ Premium Quality ★ Each Part Of This Logrunner 3D Printer Conk Kit Was Made Of Premium Material. These Components Can Be Used In A Wide Range Of Application..
★ Good After-Sales Service. We'll Respond Within 24 Hours For Any Questions..
★ Drv8825 Stepper Motor Driver With Heat Sinks ★ High Quality Stepper Motor Drive With 4 Aluminum Cooler, Running Within 2.5A Current (Maximum), Compatible With For Arduinoide Software And Hardware..
★ Professional 3D Printer Cnc Kit ★ This Is A Professional 3D Printer Diy Kit With Multiple Types Of Modules Or Components You Need. It Is A Great Assortment Set For Starters And Professionals..
Features
- Latest CNC Shield Expansion Board V3.0 -CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- Professional 3D printer CNC Kit This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- Premium Quality Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- DRV8825 Stepper Motor Driver with Heat Sinks High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
- Good after-sales service. We'll respond within 24 hours for any questions.
- See more on Amazon...
Brand: Longruner | Manufacturer: Longruner
Dimensions: 0.04 x 0.04 x 0.04 inches | Weight: 0.84 Pounds
See On Amazon #18
Beffkkip [2-Pack] Servo Motor MG995 Metal Gear Servo Waterproof Digital High Speed Torque Servo Motor for RC Airplane Helicopter Mechanical Arm Car Control Angle 180
Asin: B09JWK2GB3 | Model: MG995 | PartNumber: MG995 | Ean: 0765343061971 | UPC: 765343061971
Torque At 6V 12Kg/Cm, 7.2V 13Kg/Cm. Positioning Speed At 4.8V Without Load 0.17S / 60 Degrees;6.0V Without Load 0.13S / 60 Degrees.
This Servo Offers A Full Range Of 180° With Metal Gears. Application:Rc Robot, Airplane Control, Robot Arm And Boats. Fit For All Kind Of R/C Toys And Arduino Experiments..
Connector Wire Length 300Mm. Stable And Shock Proof Double Coreless Motor, Metal Gear, Ball Bearing Design,Through External Adapter..
This High-Speed Standard Servo Motor Can Rotate 180 Degrees (90 In Each Direction)..
Features
- Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees;6.0V without load 0.13s / 60 degrees
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter.
- This servo offers a full range of 180 with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments.
- See more on Amazon...
Brand: Beffkkip | Manufacturer: Beffkkip
See On Amazon #19
Wishiot 2pcs Tiny 1.5g servo Micro Linear Digital Servo Lightweight Mini Size for Indoor Aircraft Small RC Plane
Asin: B0B5K1KKV1 | Model: DR2770-JR | PartNumber: DR2770-JR
✧Please Note That Voltage Is 3.7V-6.0V,.
✧【 Any Questions? 】Please Feel Free To Ask Any Questions You May Have And Will Respond Within 24 Hours.
✧The Weight Of The Mini Servo Is Only 1.5G, Can Work For Small Rc Plane.
✧Ultra Small Size：21.2 X 15 X 6.0Mm.
Features
- You will get 2pcs mini servo
- Ultra small size 21.2 x 15 x 6.0mm
- Please note that voltage is 3.7V-6.0V,
- The weight of the mini servo is only 1.5g, can work for small RC plane
- Any questions? Please feel free to ask any questions you may have and will respond within 24 hours
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Weight: 0.03 pounds
See On Amazon #20
DSPOWER 2PCS 4.3G Mini Servo, RC Micro Digital Servo Motor Metal Gear Coreless Steering Servos for Fixed-Wing Helicopter Airplane Drone 1/24 1/28 RC Car SCX24 Boat Robot Toy
Asin: B0CDGRVGG2
【Coreless Motor】:4.3G Digital Servo Equipped With Coreless Motor And Clutch Protection Function, Which Can Provide Better Mute Effect And Quick Response Ability For The Servo, Greatly Improving The Accuracy Of Your Rc Models, And Also Greatly Reducing The Probability Of Servo Damage..
【Note】:In The Frequency Range Of 500~2500Us, The Maximum Controllable Angle Of The Servo Can Be Accurately Achieved At 180 Degrees, And The Servo Can Achieve A Control Angle Of 90 Degrees Under The Control Of A Transmitter..
【Widely Use 】:The 4.3G Rc Servo Is Suitable For Micro Remote Control Models Such As Rc Aircraft,Rc Helicopters,Rc Drones,Fixed-Wing,Rc Car Scx24,Boat,Toys,Etc..
【High Performance Digital Standard】:The 4.3G Mini Servo With Electronic Burn Protection Can Achieve Low Noise, Good Stability, Small Vibration, Smooth Operation, Excellent Linearity, Precision Control, Fast Response..
Features
- Excellent Quality Workmanship :The 4.3G Micro Servo made with excellent plastic shell material (lightweight and fast heat dissipation) and high-precision metal gear (prevent tooth sweeping and wear resistance ) has a longer service life.
- High Performance Digital Standard :The 4.3G Mini Servo with electronic burn protection can achieve Low Noise, Good Stability, Small Vibration, Smooth Operation, Excellent Linearity, Precision Control, Fast Response.
- Coreless Motor :4.3G Digital Servo equipped with coreless motor and clutch protection function, which can provide better mute effect and quick response ability for the servo, greatly improving the accuracy of your RC models, and also greatly reducing the probability of servo damage.
- Widely Use :The 4.3G RC Servo is suitable for micro remote control models such as RC Aircraft,RC Helicopters,RC Drones,Fixed-Wing,RC Car SCX24,Boat,Toys,etc.
- Note :In the frequency range of 500~2500us, the maximum controllable angle of the servo can be accurately achieved at 180 degrees, and the servo can achieve a control angle of 90 degrees under the control of a transmitter.
- See more on Amazon...
Brand: DSPOWER | Manufacturer: DSPOWER
Dimensions: 0.94 x 0.79 x 0.33 inches
See On Amazon
Looking For Something Else?
Search