uxcell 10mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS2ND95 | Model: B07KS2ND95 | PartNumber: B07KS2ND95
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 10mm / 0.39"; punching length: 42mm / 1.65"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon Similar To uxcell 10mm Paper Punch Drill
#1
uxcell Straight Shank Twist Drill Bits 10mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CWWN3X | Model: a19102500ux0136 | PartNumber: a19102500ux0136
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 10mm / 0.39"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 90mm / 3.54"; Total Length : 130mm / 5.12"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #2
uxcell Straight Shank Twist Drill Bits 10mm High Speed Steel 4341 with 10mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D28Q8D | Model: a19102500ux0137 | PartNumber: a19102500ux0137
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 10mm / 0.39"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 90mm / 3.54"; Total Length : 130mm / 5.12"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #3
uxcell 8mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS4JNGX | Model: a18102000ux0041 | PartNumber: a18102000ux0041
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 8mm / 0.31"; punching length: 40mm / 1.57"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon #4
uxcell Automatic Center Hole Punch Spring Loaded 5 inch Adjustable Impact Hand Tool for Metal Wood Plastic, Cr-V Steel with Brass Case
Asin: B07TYTQBG3 | Model: a19042700ux0289 | PartNumber: a19042700ux0289
[Adjust For Accuracy]: Spring-Driven Action With Adjustable Strike Force Makes Punching Easier With This Simple To Use Nail Punch Tool Drill Marker..
[Wide Application]: Use This Automatic Center Punch For Metal, Wood, Glass, Canvas, Plastic And Leather Materials. Also Can Be Used As Glass Window Breaker For Emergency Occasion Or As Spring Loaded Awl For Belts And Purses..
[Grip Comfortably]: Knurled Non-Slip Surface On Spring Loaded Nail Punch Shaft Allows For Comfortable Work And Reduced User Fatigue While The Precision Centered Tip Increases Control For More Accurately Placed Holes..
[Repeatable Impact]: The Adjustable Red Cap Gives Increased Or Decreased Striking Force And Enables To Gain Uniform Dimple Size At Every Setting..
Features
- [Premium Grade]: Made of hardened Cr-V steel that holds up to high impact, provides wear resistance, rust proof and strength to prolong the tool s life.
- [Repeatable Impact]: The adjustable red cap gives increased or decreased striking force and enables to gain uniform dimple size at every setting.
- [Adjust for Accuracy]: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
- [Grip Comfortably]: Knurled non-slip surface on spring loaded nail punch shaft allows for comfortable work and reduced user fatigue while the precision centered tip increases control for more accurately placed holes.
- [Wide Application]: Use this automatic center punch for metal, wood, glass, canvas, plastic and leather materials. Also can be used as glass window breaker for emergency occasion or as spring loaded awl for belts and purses.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell Hand Wheel 80mm Diameter 10mm Hole Diameter for Milling Machine 2Pcs
Asin: B07KFT42BZ | Model: a18102000ux0075 | PartNumber: a18102000ux0075
Wheel Height(Without Handle): 23.3Mm / 0.92".
It Is Widely Used In Industrial Machine Tools, Such As Milling Machine, Lathes, Grinders Etc..
Package Content: 2 X Hand Wheel; 2 X Revolving Handle.
Wheel Diameter (Approx): 80Mm / 3.15".
Features
- Center Bore Diameter (Approx.): 10mm / 0.39" ; Keyslot Width: 3mm
- Wheel Diameter (Approx): 80mm / 3.15
- Wheel Height(without handle): 23.3mm / 0.92
- Package Content: 2 x Hand Wheel; 2 x Revolving Handle
- It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Hollow Paper Drill Bit 3.5mmx70mm, 2.5mmx65mm for Straight Shank Punch Punching Machine 2pcs
Asin: B0BQZQNYFN | Model: f22040600ux0309 | PartNumber: f22040600ux0309
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching Length: 33mm/1.3", 21mm/0.83"; Punching Diameter: 3.5mm/0.14", 2.5mm/0.1"; Shank Diameter: 11mm; Total Length: 70mm/2.75", 65mm/2.56"
- Applications: Specially used for punching tags, wall calendars, desk calendars, books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 2 PCS 10mm Straight Shank Electric HSS Twist Drill Bit
Asin: B007Q8IWW2 | Model: a10112300ux0451 | PartNumber: a10112300ux0451 | Ean: 0696735400323 | UPC: 696735400323
Bit Diameter: 10Mm / 0.39"; Flute Length: 90Mm/3.54".
Package Content: 2 X Twist Drill Bit.
Total Length: 130Mm/5.1"; Color: Gray; Weight: 97G.
Shank Diameter: 10Mm / 0. 39".
Features
- Product Name: Twist Drill Bit; Material: HSS
- Shank Diameter: 10mm / 0. 39
- Bit Diameter: 10mm / 0.39; Flute Length: 90mm/3.54
- Total Length: 130mm/5.1; Color: Gray; Weight: 97g
- Package Content: 2 x Twist Drill Bit
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 4.72 x 3.94 inches | Weight: 0.00 Pounds
See On Amazon #8
uxcell 8mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine, 2pcs
Asin: B07KS34LJV | Model: a18102000ux0027 | PartNumber: a18102000ux0027
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 8mm / 0.31"; punching length: 41mm / 1.61"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon #9
uxcell Hole Punch Drill Set, 3mm 4mm Hole Punching Taper Shank Hollow Drill Bits for Paper Tags Calendars Leather Handbags 2pcs
Asin: B0C55GSXGB | Model: f22030300ux0104 | PartNumber: f22030300ux0104
Features: It Is Polished, Overall Quenching, High Hardness (Hardened To 52-55Hrc), Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block..
Tips: The Smaller The Pinhole, The Slower The Speed. If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill..
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. Taper Shank (A): Installed On The Machine Without Screws, Not Easy To Disassemble. Straight Shank (H): Installed On The Machine With Screws, Easy To Disassemble..
Wide Applications: Widely Used For Punching Tags, Wall Calendars, Desk Calendars, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc...
Features
- Hole Punch Drill: Punching Diameter: 3mm / 0.12", 4mm / 0.16"; Shank Diameter: 10.7mm-11.7mm; Punching Length: 28mm / 1.1", 34mm / 1.34"; Total Length:65mm / 2.56", 70mm / 2.75"; Shank Type: Taper Shank (no screws required when installing)
- Wide Applications: Widely used for punching tags, wall calendars, desk calendars, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc..
- Features: It is polished, overall quenching, high hardness (hardened to 52-55HRC), not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block.
- Easy to Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. Taper shank (A): Installed on the machine without screws, not easy to disassemble. Straight shank (H): Installed on the machine with screws, easy to disassemble.
- Tips: The smaller the pinhole, the slower the speed. If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Automatic Center Punch HSS Adjustable Spring Loaded Drill Tools Black
Asin: B07TDKGR2M | Model: a19032700ux0272 | PartNumber: a19032700ux0272
Easy Use: Automatic Center Punch Has One-Handed Impact Operation, No Hammer Needed..
Applications: It Can Accommodate Various Types Of Materials Such As Plastic, Wood, Metal, Glass, Leather, Etc..
Knurled Body: Great Resistance To Dirt And Corrosion, Non-Slip..
Adjustable Tension: Center Punch Is Spring Loaded With Adjustable Stroke. Spring Tension Adjusts For Light Or Heavy Strokes, Marking, Punching And Staking..
Features
- Tip Material: Constructed from HSS which is durable and retains its sharpness throughout multiple uses.
- Adjustable Tension: Center punch is spring loaded with adjustable stroke. Spring tension adjusts for light or heavy strokes, marking, punching and staking.
- Easy Use: Automatic center punch has one-handed impact operation, no hammer needed.
- Knurled Body: Great resistance to dirt and corrosion, non-slip.
- Applications: It can accommodate various types of materials such as plastic, wood, metal, glass, leather, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Auger Drill Bit Wood Hex Shank 10mm Cutting Dia Highbon Steel for Electric Bench Drill Woodworkingpentry
Asin: B07ML2N2P1 | Model: B07ML2N2P1 | PartNumber: B07ML2N2P1
[Hollow Center Flutes]: Clear Chips Quickly Out Of Holes, Creating Deep Holes Quickly And Cleanly..
[Note]: Please Do Not Apply This Kind Of Auger Drill Bits To Metalwork Like Reinforcement Bars..
[Self-Guide Direct Thread]: Make It Easier, Faster And More Accurate When Drilling In The Hard/Soft Wood..
[Hex Shank]: Avoid The Bit Sliding Off Collet. [Broad Blades]: Keep The Drill Bit Straight As It Bores..
Features
- [Cutting Dia.]: 10mm/0.4 inch; [Shank Width]: 9mm/0.4 inch; [Drill Depth]: 15.8cm/6.2 inch; [Total Length]: 23cm/9 inch
- [Hex Shank]: Avoid the bit sliding off collet. [Broad Blades]: Keep the drill bit straight as it bores.
- [Hollow Center Flutes]: Clear chips quickly out of holes, creating deep holes quickly and cleanly.
- [Self-Guide Direct Thread]: Make it easier, faster and more accurate when drilling in the hard/soft wood.
- [NOTE]: Please do NOT apply this kind of auger drill bits to metalwork like reinforcement bars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 9.06 x 1.18 inches | Weight: 0.00 Pounds
See On Amazon #12
uxcell 10.1mm Dia HSS Cobalt Straight Round Shank Metric Twist Drill Bit Drilling Tool
Asin: B06XVVWS9P | Model: a17011600ux0462 | PartNumber: a17011600ux0462 | Ean: 0604267777363 | UPC: 604267777363
Material: Hss, Cobalt; Flute Length: 68Mm / 2.7".
Fearure: Straight Shank; Color: Champagne Color.
Bit Diameter: 10.1Mm; Weight: 63G.
Product Name: Twist Drill Bit; Package Content: 1 X Twist Drill Bit.
Features
- Total Length: 130mm / 5.1"; Shank Diameter: 10.1mm
- Product Name: Twist Drill Bit; Package Content: 1 x Twist Drill Bit
- Material: HSS, Cobalt; Flute Length: 68mm / 2.7
- Bit Diameter: 10.1mm; Weight: 63g
- Fearure: Straight Shank; Color: Champagne Color
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 10mm X 10mm X 200mm HSS Cutter Tool Bit Lathe Milling Boring Bar 5pcs
Asin: B012TAQT94 | Model: a15062200ux0137 | PartNumber: a15062200ux0137 | Ean: 0712662056959 | UPC: 712662056959
Overall Size: 10 X 10 X 200Mm/ 0.4" X 0.4" X 8" (T*W*L).
Shape: Parallelogram.
Main Color: Silver Tone.
Main Material: Hss; Package Content: 5 X Lathe Hss Tool Bit.
Features
- Weight: 756g; Product Name: Lathe HSS Tool Bit
- Main Material: HSS; Package Content: 5 x Lathe HSS Tool Bit
- Overall Size: 10 x 10 x 200mm/ 0.4 x 0.4 x 8 (T*W*L)
- Main Color: Silver Tone
- Shape: Parallelogram
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Hollow Paper Drill Bit 5mmx75mm, 4mmx70mm for Straight Shank Punch Punching Machine 2pcs
Asin: B0BQZSHXDR | Model: f22040600ux0308 | PartNumber: f22040600ux0308
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching Length: 39mm/1.53", 35mm/1.38"; Punching Diameter: 5mm/0.2", 4mm/0.16"; Shank Diameter: 11mm; Total Length:75mm/2.95"
- Applications: Specially used for punching tags, wall calendars, desk calendars, books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 9mm Paper Punch Drill, Straight Shank Hollow Bit Tool, for Hole Puncher Punching Machine
Asin: B07KS47V29
Features: Overall Quenching, High Hardness, Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block.
Notice: If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill.
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. The Smaller The Pinhole, The Slower The Speed.
Applications: Specially Used For Punching Tags, Wall Calendars, Desk Calendars, Account Books, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc..
Features
- Punch Drill: Punching dia.: 9mm / 0.35"; punching length: 42mm / 1.65"; shank dia.: 11mm / 0.43"; total length: 75mm / 2.95". It is polished, hardened to 52-55HRC
- Applications: Specially used for punching tags, wall calendars, desk calendars, account books, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc.
- Features: Overall quenching, high hardness, not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block
- Easy To Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. The smaller the pinhole, the slower the speed
- Notice: If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 2.36 inches
See On Amazon #16
uxcell Hole Punch Drill Set, 3mm 5mm Hole Punching Straight Shank Hollow Drill Bits for Paper Tags Calendars Leather Handbags 2pcs
Asin: B0C55D8PDK
Features: It Is Polished, Overall Quenching, High Hardness (Hardened To 52-55Hrc), Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block..
Tips: The Smaller The Pinhole, The Slower The Speed. If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill..
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. Taper Shank (A): Installed On The Machine Without Screws, Not Easy To Disassemble. Straight Shank (H): Installed On The Machine With Screws, Easy To Disassemble..
Wide Applications: Widely Used For Punching Tags, Wall Calendars, Desk Calendars, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc...
Features
- Hole Punch Drill: Punching Diameter: 3mm / 0.12", 5mm / 0.2"; Shank Diameter: 11mm / 0.43"; Punching Length: 29mm / 1.14", 39mm / 1.53"; Total Length: 70mm / 2.75", 75mm / 2.95"; Shank Type: Straight Shank (screws required when installing)
- Wide Applications: Widely used for punching tags, wall calendars, desk calendars, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc..
- Features: It is polished, overall quenching, high hardness (hardened to 52-55HRC), not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block.
- Easy to Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. Taper shank (A): Installed on the machine without screws, not easy to disassemble. Straight shank (H): Installed on the machine with screws, easy to disassemble.
- Tips: The smaller the pinhole, the slower the speed. If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Hole Saw Arbor SDS 10mm Shank for Hole Saw, Quick Change Mandrel with 2 Locking Pins
Asin: B07TC5JJ6M
Recessed Screw: Set A Recessed Screw For Quick And Easy Centering Bit Changes.
Versatile Use: Used In Applications Such As Installing Pipe, Copper Tubing, Pvc Or Cutting A Round Hole In Either Wood Or Metal.
Locking Pins Design: Pins Lock The Saw To Prevent Over-Tightening And Threads From Stripping.
Quick Change Mandrel: Tool-Free, Fast And Easy To Engage And Disengage. Prevent Hole Saws From Locking To The Mandrel.
Features
- PERFECT FOR HOLE SAW: 10mm round shank arbor features two grooves and two potholes, perfectly fits hole saws
- QUICK CHANGE MANDREL: Tool-free, fast and easy to engage and disengage. Prevent hole saws from locking to the mandrel
- RECESSED SCREW: Set a recessed screw for quick and easy centering bit changes
- LOCKING PINS DESIGN: Pins lock the saw to prevent over-tightening and threads from stripping
- VERSATILE USE: Used in applications such as installing pipe, copper tubing, PVC or cutting a round hole in either wood or metal
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 2mm Dia Round Tip Steel Straight Ejector Pin Punch 150mm Shank Length Gray 10pcs
Asin: B01MS6EHHI | Model: a16111400ux0350 | PartNumber: a16111400ux0350 | Ean: 0709874993202 | UPC: 709874993202
Color: Silver Gray; Shank Diameter: 2Mm / 0.08".
Weight: 47G.
Shank Length: 150Mm / 6".
Product Name: Ejector Pin; Material: Steel.
Features
- Package Content: 10pcs x Ejector Pin; Total Size: 154 x 6mm / 6.06" x 0.24"(L*Max.D)
- Product Name: Ejector Pin; Material: Steel
- Color: Silver Gray; Shank Diameter: 2mm / 0.08
- Shank Length: 150mm / 6
- Weight: 47g
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Hole Punch Drill Set, 3.5mm 5mm Hole Punching Taper Shank Hollow Drill Bits for Paper Tags Calendars Leather Handbags 4pcs
Asin: B0C55D7PL1
Features: It Is Polished, Overall Quenching, High Hardness (Hardened To 52-55Hrc), Not Easy To Break. 90-Degree Inner Chamfer Opening, Good Edge Sharpness And Strength, 80% Less Resistance Than Traditional Technology, Not Easy To Block..
Tips: The Smaller The Pinhole, The Slower The Speed. If The Punch Is Blocked, It Should Be Removed And Cleaned Up In Time And Reinstalled For Use. It Is Often Waxed And Lubricated (Candle Or Soap Is A Good Substitute) At The Cutting Edge Of The Drill..
Easy To Use: Papers Should Be Placed Flat When Punching. Pay Attention To The Lubrication Of The Punch Drill. Taper Shank (A): Installed On The Machine Without Screws, Not Easy To Disassemble. Straight Shank (H): Installed On The Machine With Screws, Easy To Disassemble..
Wide Applications: Widely Used For Punching Tags, Wall Calendars, Desk Calendars, And Handbags. Suitable For Ordinary Paper, Offset Paper, Coated Paper, Grease Film Paper, Leather, Fabric Etc...
Features
- Hole Punch Drill: Punching Diameter: 3.5mm / 0.14", 5mm / 0.2"; Shank Diameter: 10.7mm-11.7mm; Punching Length: 35mm / 1.37", 40mm / 1.57"; Total Length: 70mm / 2.75", 75mm / 2.95"; Shank Type: Taper Shank (no screws required when installing)
- Wide Applications: Widely used for punching tags, wall calendars, desk calendars, and handbags. Suitable for ordinary paper, offset paper, coated paper, grease film paper, leather, fabric etc..
- Features: It is polished, overall quenching, high hardness (hardened to 52-55HRC), not easy to break. 90-degree inner chamfer opening, good edge sharpness and strength, 80% less resistance than traditional technology, not easy to block.
- Easy to Use: Papers should be placed flat when punching. Pay attention to the lubrication of the punch drill. Taper shank (A): Installed on the machine without screws, not easy to disassemble. Straight shank (H): Installed on the machine with screws, easy to disassemble.
- Tips: The smaller the pinhole, the slower the speed. If the punch is blocked, it should be removed and cleaned up in time and reinstalled for use. It is often waxed and lubricated (candle or soap is a good substitute) at the cutting edge of the drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search