uxcell Round Steel Rod, 9mm HSS Lathe Bar Stock Tool 100mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 5pcs
Asin: B07KY1494R | Model: a18102400ux0423 | PartNumber: a18102400ux0423
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 9mm / 0.35"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 1.97 inches
See On Amazon Similar To uxcell Round Steel Rod 9mm
#1
uxcell 1.5mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 10pcs
Asin: B082ZNTD4J | Model: a19102800ux0037 | PartNumber: a19102800ux0037
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 1.5Mm/ 1/16 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 10pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 1.5mm/ 1/16 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 4mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 5pcs
Asin: B082ZNGFZY | Model: a19102800ux0096 | PartNumber: a19102800ux0096
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 4Mm/5/32 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 5pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 4mm/5/32 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 2mm x 150mm 304 Stainless Steel Solid Round Rod for DIY Craft - 5pcs
Asin: B082ZNVLLG | Model: a19102800ux0042 | PartNumber: a19102800ux0042
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 2Mm/ 5/64 Inch; Length: 150Mm/5.9 Inch..
Features
- [ Product Contents ] - 5pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 2mm/ 5/64 inch; Length: 150mm/5.9 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 8mm x 100mm 304 Stainless Steel Solid Round Rod for DIY Craft - 5pcs
Asin: B082ZP5CLB | Model: a19102800ux0129 | PartNumber: a19102800ux0129
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 8Mm/5/16 Inch; Length: 100Mm/3.93 Inch..
Features
- [ Product Contents ] - 5pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 8mm/5/16 inch; Length: 100mm/3.93 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 2pcs Round Steel Metal Rods, 8mm x 100mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft, 2pcs
Asin: B07KY8858F | Model: a18102400ux0418 | PartNumber: a18102400ux0418
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 8mm / 0.31"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 0.79 inches
See On Amazon #6
uxcell 8mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 2pcs
Asin: B082ZNM4L3 | Model: a19102800ux0140 | PartNumber: a19102800ux0140
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 8Mm/5/16 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 2pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 8mm/5/16 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 3mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 10pcs
Asin: B082ZNQKHL
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 3Mm/ 1/8 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 10pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 3mm/ 1/8 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 2.5mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 10pcs
Asin: B082ZP51H5 | Model: a19102800ux0067 | PartNumber: a19102800ux0067
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 2.5Mm/ 3/32 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 10pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 2.5mm/ 3/32 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Round Steel Rod, 7mm HSS Lathe Bar Stock Tool 200mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 2pcs
Asin: B07KT2DVCG | Model: a18103100ux0131 | PartNumber: a18103100ux0131
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 7mm / 0.28"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 5.91 inches
See On Amazon #10
uxcell Round Steel Rod, 10mm HSS Lathe Bar Stock Tool 150mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool
Asin: B07SWB1LVM | Model: a19050800ux0846 | PartNumber: a19050800ux0846
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 10mm / 0.39"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Round Die Stock Handle Wrench Set, 5/16-18 UNC Threading Die and 25mm Die Holder (Fits: 16mm-25mm OD Die / M7-M8 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093FB5PMG
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 25mm x 9mm die stock fits 16mm-25mm outside diameter die / M7-M8 thread die, with 5 adjustable screws Round Die: 5/16-18 UNC threading die with 25mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #12
uxcell Round Steel Rod, 10mm HSS Lathe Bar Stock Tool 150mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 2pcs
Asin: B07SYHFDL8 | Model: a19050800ux0847 | PartNumber: a19050800ux0847
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 10mm / 0.39"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Carbon Fiber Rod for RC Airplane DIY Craft 1mm Matte Pole 400mm 15.7 Inch, 10pcs
Asin: B07PB3VHTR | Model: a19011900ux0016 | PartNumber: a19011900ux0016
Corrosion Resistance, Anti-Aging, And Long Service Life..
They Are Superior To Other Metals In The Field Of Corrosion Protection And Have Good Water Resistance And Aging Resistance, So In Corrosive Environments..
Carbon Fiber Products Are Resistant To Acids, Salts, Some Organic Solvents, And Other Corrosive Resistance..
Lightweight And High Strength. Therefore, Lightweight And High Strength Are The Distinctive Features Of Carbon Fiber Composites..
Features
- PARAMETER - Material: Carbon Fiber; Diameter: 1mm; Length: 400mm / 15.7 inch.
- Lightweight and high strength. Therefore, lightweight and high strength are the distinctive features of carbon fiber composites.
- Corrosion resistance, anti-aging, and long service life.
- Carbon fiber products are resistant to acids, salts, some organic solvents, and other corrosive resistance.
- They are superior to other metals in the field of corrosion protection and have good water resistance and aging resistance, so in corrosive environments.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 16.14 x 0.39 x 0.39 inches
See On Amazon #14
uxcell 8mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 10pcs
Asin: B082ZNS5DD | Model: a19102800ux0142 | PartNumber: a19102800ux0142
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 8Mm/5/16 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 10pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 8mm/5/16 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 4mm x 300mm 304 Stainless Steel Solid Round Rod for DIY Craft - 10pcs
Asin: B082ZNPVR7 | Model: a19102800ux0097 | PartNumber: a19102800ux0097
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 4Mm/5/32 Inch; Length: 300Mm/11.81 Inch..
Features
- [ Product Contents ] - 10pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 4mm/5/32 inch; Length: 300mm/11.81 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 9mm Carbon Steel Bearing Balls Precision Balls 100pcs
Asin: B07SYYFFKV | Model: a19041900ux0319 | PartNumber: a19041900ux0319
Smooth Surface Precision Balls. Lightly Lubricated.
Package Includes 100 Piece Balls.
Good Hardness And Wear Resistance.
Made Of High Precision Carbon Steel.
Features
- 9mm in diameter
- Made of High Precision Carbon Steel
- Smooth surface precision balls. Lightly lubricated
- Good hardness and wear resistance
- Package includes 100 piece balls
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 304 Stainless Steel Round Tubing 9mm OD 1mm Wall Thickness 250mm Length Seamless Straight Pipe Tube 4 Pcs
Asin: B081J6VMFC | Model: a19100500ux0322 | PartNumber: a19100500ux0322
[Seamless Construction] - The Surface Of Stainless Steel Tube Is Smooth And Seamless And Is Available In Mechanical Structural Components For Precision Applications..
[Wide Applications] - The Stainless Steel Tubing Commonly Used In Industry, Ship Models, Pipelines, Mechanical Instrumentation, Mechanical Structural Components, Etc. Also For Home Decoration And Handicrafts, Such As Frames, Crafts, Gardening Products, Railings, Furniture, Etc..
[How To Use] - According To The Length You Need, It Can Be Processed By Using Professional Equipment. Besides, It Can Be Threaded Or Welded To Meet Your Needs..
[Material] - The Metal Tubes Are Made Of 304 Stainless Steel For High Strength, Weldability, Wear Resistance, Heat Resistance And Long-Lasting Durability. Besides, Finish With Polishing, For Adding Gloss And Smooth Surface, Oxidation Resistance And Corrosion Resistance..
Features
- [304 Stainless Steel Tube] - Our round metal tube is 9mm in outer diameter, 7mm in inner diameter, 1mm in wall thickness, and 250mm in total length.
- [Material] - The metal tubes are made of 304 stainless steel for high strength, weldability, wear resistance, heat resistance and long-lasting durability. Besides, finish with polishing, for adding gloss and smooth surface, oxidation resistance and corrosion resistance.
- [Seamless Construction] - The surface of stainless steel tube is smooth and seamless and is available in mechanical structural components for precision applications.
- [How to Use] - According to the length you need, it can be processed by using professional equipment. Besides, it can be threaded or welded to meet your needs.
- [Wide Applications] - The stainless steel tubing commonly used in industry, ship models, pipelines, mechanical instrumentation, mechanical structural components, etc. Also for home decoration and handicrafts, such as frames, crafts, gardening products, railings, furniture, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 304 Stainless Steel Round Tubing 9mm OD 0.8mm Wall Thickness 250mm Length Seamless Straight Pipe Tube 2 Pcs
Asin: B081GFNJJ4 | Model: a19100500ux0318 | PartNumber: a19100500ux0318
[Seamless Construction] - The Surface Of Stainless Steel Tube Is Smooth And Seamless And Is Available In Mechanical Structural Components For Precision Applications..
[Wide Applications] - The Stainless Steel Tubing Commonly Used In Industry, Ship Models, Pipelines, Mechanical Instrumentation, Mechanical Structural Components, Etc. Also For Home Decoration And Handicrafts, Such As Frames, Crafts, Gardening Products, Railings, Furniture, Etc..
[How To Use] - According To The Length You Need, It Can Be Processed By Using Professional Equipment. Besides, It Can Be Threaded Or Welded To Meet Your Needs..
[Material] - The Metal Tubes Are Made Of 304 Stainless Steel For High Strength, Weldability, Wear Resistance, Heat Resistance And Long-Lasting Durability. Besides, Finish With Polishing, For Adding Gloss And Smooth Surface, Oxidation Resistance And Corrosion Resistance..
Features
- [304 Stainless Steel Tube] - Our round metal tube is 9mm in outer diameter, 7.4mm in inner diameter, 0.8mm in wall thickness, and 250mm in total length.
- [Material] - The metal tubes are made of 304 stainless steel for high strength, weldability, wear resistance, heat resistance and long-lasting durability. Besides, finish with polishing, for adding gloss and smooth surface, oxidation resistance and corrosion resistance.
- [Seamless Construction] - The surface of stainless steel tube is smooth and seamless and is available in mechanical structural components for precision applications.
- [How to Use] - According to the length you need, it can be processed by using professional equipment. Besides, it can be threaded or welded to meet your needs.
- [Wide Applications] - The stainless steel tubing commonly used in industry, ship models, pipelines, mechanical instrumentation, mechanical structural components, etc. Also for home decoration and handicrafts, such as frames, crafts, gardening products, railings, furniture, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 6mm x 250mm 304 Stainless Steel Solid Round Rod for DIY Craft - 5pcs
Asin: B082ZNVHKQ | Model: a19102800ux0123 | PartNumber: a19102800ux0123
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 6Mm/15/64 Inch; Length: 250Mm/9.84 Inch..
Features
- [ Product Contents ] - 5pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 6mm/15/64 inch; Length: 250mm/9.84 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 30pcs 9mm Chrome Steel Bearing Balls G5 Precision
Asin: B09994DNC7 | Model: a21042400ux0348 | PartNumber: a21042400ux0348
Features - Wide Range Of Applications(Maintain Industrial Equipment Or Use For Family Diy Projects); Cost-Effective(Can Repair Existing Products).
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Maintain Product That Uses Steel Balls, Such As Ball Bearings, Turntable, Drawer Slides, Casters, Door Locks; Diy Projects Like A Keychain, Or Adding Weight For Your Projects, Etc..
Material - Made Of Chrome Steel With Excellent Surface Quality, High Hardness, High Load Capacity, And Wear Resistance..
Features
- Size - 9mm Diameter Grade G5 Precision Balls
- Material - Made of chrome steel with excellent surface quality, high hardness, high load capacity, and wear resistance.
- Features - Wide range of applications(maintain industrial equipment or use for family DIY projects); Cost-effective(can repair existing products)
- Applications - Maintain product that uses steel balls, such as ball bearings, turntable, drawer slides, casters, door locks; DIY projects like a keychain, or adding weight for your projects, etc.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search