ELUTENG M.2 SATA/NGFF to USB Adapter (Not for NVME/PCIE SSD) B Key and B&M Key SSD to USB 3.0 Reader Card Compatible for M.2 SATA NGFF USB Drive Coverter Adapter 5Gbps
Asin: B07LCZVDQG | Model: M.2 NGFF | PartNumber: M.2 NGFF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ngff Converter Reader Card, Support 2230 / 2242 / 2260 / 2280 M.2 Sata Port Ngff Ssd, Hollow Design At 22*42 And 22*60 Card Position, Can Be Removed And Shorten To Fit Your Ssd..
Plug And Play, Widely Compatible With Windows 11/10/8/7/Xp/2003/2000/Vista, Linux And Mac Os..
M.2 Ngff To Usb 3.0, High Speed Transmission Up To 5Gbps(Theoretical), Backward Compatible With Usb2.0/Usb1.1..
Before Purchasing, Please Check Your Ssd Label, If It Prints Pcie, Nvme, This Adapter Will Not Support, If You Are Not Sure Your Ssd Is Compatible With This Adapter, Please Contact Us Before Purchasing..
Features
- M.2 NGFF/SATA to USB 3.0 converter, Not support M.2 PCIE / NVME SSD, only support NGFF SATA interface B key and B+M key M.2 SSD, can transfer your m.2 SSD to computer via USB 3.0 interface.
- Before purchasing, please check your SSD label, if it prints PCIE, NVME, this adapter will not support, if you are not sure your SSD is compatible with this adapter, please contact us before purchasing.
- NGFF Converter Reader Card, support 2230 / 2242 / 2260 / 2280 M.2 SATA port NGFF SSD, hollow design at 22*42 and 22*60 card position, can be removed and shorten to fit your SSD.
- M.2 NGFF to USB 3.0, high speed transmission up to 5Gbps(Theoretical), backward compatible with USB2.0/USB1.1.
- Plug and play, widely compatible with Windows 11/10/8/7/XP/2003/2000/Vista, Linux and Mac OS.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Dimensions: 0.39 x 4.33 x 1.06 inches
Warranty: NoWarningApplicable
See On Amazon Similar To ELUTENG M.2 SATA NGFF to
#1
ELUTENG NVME to USB Adapter M.2 NVME Hard Drive USB3.1 Gen2 10Gbps USB to NVME PCI-E Converter Reader M Key Support UASP for 2280 2260 2242 2230 SSD (Only for M.2 NVME)
Asin: B0CB45PRMF | Model: M.2 NVME | PartNumber: M.2 NVME
【4Tb Large Capacity】Up To 4Tb Ssd Can Be Installed. Backward Compatible With Usb3.0/Usb2.0 Interface, Read Speed: 1000Mb/S (This Data Is For Reference Only). Compatible With Windows 7/8/10 / Mac Os / Linux Systems..
【Easy To Use】 M.2 Nvme Compatible. Comes With Screws And Screwdriver, Easy To Install And Portable..
【Heat Dissipation Design】 Pcba Board Surface Is Processed With Copper Rod To Prevent Abnormal Heat Generation Of The Product. Heat Dissipating Silicon Based Chip Design Is Used. In Addition, A Heat Dissipation Silicone Patch Is Included To Effectively Prevent Excessive Temperature..
【High Speed & Stability】The External Output Port Is Usb3.1 Gen2 Usb Type-A. The Theoretical Transfer Speed Is 10 Gbps For Nvme Protocol, With A Substantial Increase In Read Speed And A Rise In Transfer Speed For Large Files; Using Jms583 Chip With Uasp And Trim Functions. Reduced Cpu Load, Lower Consumption, Faster Speed And Higher Durability..
Features
- Compatible with M.2 NVME Eluteng NVME compatible hard drive enclosure, it supports M.2 NVME in 2230/2242/2260/2280mm sizes, compatible with M-key(Not for B-Key and B&M-Key). Note: M.2 NGFF, PCI-E AHCI protocol is not supported.
- High Speed & Stability The external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using JMS583 chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
- 4TB large Capacity Up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems.
- Heat Dissipation Design PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature.
- Easy to use M.2 NVME compatible. Comes with screws and screwdriver, easy to install and portable.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 12 months
See On Amazon #2
ELUTENG M.2 to USB Adapter M.2 NVME / NGFF Hard Drive USB3.1 Gen2 10Gbps USB to NVME PCI-E Converter Reader M Key & B+M Key Support UASP for 2280 2260 2242 2230 SSD Enclosure
Asin: B0BJCYR1P7 | Model: M.2 NVME&NGFF | PartNumber: M.2 NVME&NGFF
【4Tb Large Capacity】Up To 4Tb Ssd Can Be Installed. Backward Compatible With Usb3.0/Usb2.0 Interface, Read Speed: 1000Mb/S (This Data Is For Reference Only). Compatible With Windows 11/10/7/Mac Os/Linux Systems..
【Easy To Use】 Ngff/Nvme Compatible. Comes With Screws And Screwdriver, Easy To Install M.2 Nvme And Ngff (Sata), Easy To Use And Portable..
【Heat Dissipation Design】Pcba Board Surface Is Processed With Copper Rod To Prevent Abnormal Heat Generation Of The Product. Heat Dissipating Silicon Based Chip Design Is Used. In Addition, A Heat Dissipation Silicone Patch Is Included To Effectively Prevent Excessive Temperature..
【High Speed & Stability】The M2 Usb Adapter External Output Port Is Usb3.1 Gen2 Usb Type-A. The Theoretical Transfer Speed Is 10Gbps For Nvme Protocol And 5 Gbps For Ngff Protocol, With A Substantial Increase In Read Speed And A Rise In Transfer Speed For Large Files, Using Rtl9210b Chip With Uasp And Trim Functions. Reduced Cpu Load, Lower Consumption, Faster Speed And Higher Durability..
Features
- Compatible with M.2 NVME and NGFF (SATA) Eluteng m.2 to usb adapter, corresponds to two different hard drives. It supports M.2 NVME or NGFF (SATA) in 2230/2242/2260/2280mm sizes. Compatible with B-key, M-key and B+M-key. Meet the needs of different scenarios and save time, effort and money by eliminating the need to deploy two additional hard drives! Note: PCI-E AHCI protocol is not supported.
- High Speed & Stability The m2 usb adapter external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10Gbps for NVME protocol and 5 Gbps for NGFF protocol, with a substantial increase in read speed and a rise in transfer speed for large files, using RTL9210B chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
- 4TB large capacity Up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 11/10/7/Mac OS/Linux systems.
- Heat Dissipation Design PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature.
- Easy to use NGFF/NVME compatible. Comes with screws and screwdriver, easy to install M.2 NVME and NGFF (SATA), easy to use and portable.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Weight: 0.04 pounds
Warranty: 12 months
See On Amazon #3
ELUTENG NVMe PCIe 4.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16 Card with Aluminum Heat Sink M.2 to PCI-Express SSD Expansion Card Support 2230 2242 2260 2280 Compatible for Windows/Linux/Moc os
Asin: B0C7PX25VR
【High-Speed Transfer】The Adapter Uses The Nvme Protocol And Pci-E Lanes, The Maximum Read Speed Reaches 32 Gbp/S (Theoretical Speed). This Greatly Reduces The Transfer Time For Large Files. *Note: The Actual Transfer Speed Depends On The Device Interface And Working Environment..
【Effective Heat Dissipation】Aluminum Heatsink Design Reduces The Temperature Generated By The Ssd During Operation, Thus Stabilizing The Performance Of The Ssd. This Not Only Stabilizes The Performance Of The Ssd, But Also Extends The Life Of The Drive..
【Safe And Stable】Solid-State Capacitors Are Used For Voltage Regulation, Which Prevents Current Waves From Being Generated In The Event Of Ssd Damage. It Can Operate Stably Under High And Low Temperature Conditions To Protect The Hard Disk. Pcie To M.2 Adapter Size: 140*35Mm (L*W), Compatible With Windows 7/10/11 System, No Driver Is Needed For Win8 And Above System, Driver Is Needed For Ssd In Win7 And Below System..
【Support List】Expansion Card Support: Pcie 4X / 8X / 16X, M-Key/B&M-Key Pcie To M.2 Adapter. *Note: Pci-E 1X And Pci Slots Are Not Supported; Msata And B-Key Interfaces Are Not Supported..
Features
- PCIE to M.2 adapter Compatible with 2230/2242/2260/2280 M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.
- Support List Expansion card support: PCIe 4X / 8X / 16X, M-Key/B&M-key PCIE to M.2 adapter. *Note: PCI-E 1x and PCI slots are not supported; MSATA and B-KEY interfaces are not supported.
- High-speed Transfer The adapter uses the NVMe protocol and PCI-E lanes, the maximum read speed reaches 32 Gbp/s (theoretical speed). This greatly reduces the transfer time for large files. *Note: The actual transfer speed depends on the device interface and working environment.
- Safe and Stable Solid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.
- Effective Heat Dissipation Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
See On Amazon #4
ELUTENG M.2 NVME SATA SSD Enclosure Dual Protocol Aluminum USB 3.2 Gen 2 NVME to USB Adapter 10 Gbps Tool-Free External SSD Reader Supports M and B&M Keys 2230/2242/2260/2280 SSDs
Asin: B08H22BV1N | Model: M.2 SATA/NVME Enclosure | PartNumber: M.2 SATA/NVME Enclosure
【Easy To Install/Remove】This Ssd Enclosure Allows You To Easily Install And Remove, No Tools And No Driver Required, Plug And Play. With A Compact And Portable Design, Easy To Carry. Blue Indicator Shows The Data Transfer Status, Easy And Clear..
【Wide Application】The M.2 External Encolusre Equipped With Usb Type-A To Type-C And Usb Type-C To Type-C Data Cables, Compatible With Window 7/ 8/ 10/ 11/ Mac Os / Linux Multi-Platform Operation System. Suitable For Connecting Pc, Smart Phone, Tablet, Smart Tv, Smart Router, Ps4 And Other Devices..
【Ngff Sata & Nvme Pcie 2-In-1】M.2 Ssd Enclosure Is Suitable For M.2 Nvme M Key/B+M Key And M.2 Ngff Sata B+M Key. Support Ssd Size: 2230/2242/2260/2280. The Maximum Capacity Of Ssd Is 4Tb..
【Excellent Heat Dissipation Performance】This Nvme Adapter Shell Is Made Of Aluminum Alloy, Stylish And Texture, Abrasion, Scratch Resistance And Durable. Allowing Heat To Be Transmitted To The Shell In Time, Avoiding Damage To The Hard Disk And Preventing Speed Loss..
Features
- 10Gbps High Speed This NVMe enclosure adopts USB3.2 GEN2 Type-C interface, NVMe SSD can support up to 10Gbps transfer rate, SATA SSD supports up to 5Gbps transfer rate; The M.2 enclosure built in RTL9210B main control chip, support UASP Trim, can reduce CPU load, reduce consumption, greatly improve read and write efficiency.
- Excellent Heat Dissipation Performance This NVMe adapter shell is made of aluminum alloy, stylish and texture, abrasion, scratch resistance and durable. Allowing heat to be transmitted to the shell in time, avoiding damage to the hard disk and preventing speed loss.
- Easy to Install/Remove This SSD enclosure allows you to easily install and remove, no tools and no driver required, plug and play. With a compact and portable design, easy to carry. Blue Indicator shows the data transfer status, easy and clear.
- NGFF SATA & NVMe PCIe 2-In-1 M.2 SSD enclosure is suitable for M.2 NVMe M Key/B+M Key and M.2 NGFF SATA B+M Key. Support SSD Size: 2230/2242/2260/2280. The maximum capacity of SSD is 4TB.
- Wide Application The M.2 external encolusre Equipped with USB Type-A to Type-C and USB Type-C to Type-C data cables, compatible with Window 7/ 8/ 10/ 11/ Mac OS / Linux multi-platform operation system. Suitable for connecting PC, smart phone, tablet, smart TV, smart router, PS4 and other devices.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 12 months
See On Amazon #5
ELUTENG NVME PCIe 4.0 Adapter M.2 NVME SSD to PCI-e Slots X1 X4 X8 X16 Expansion Card with Aluminum Heatsink NVME SSD to PCI Express Card Low Profile Bracket Support 2230 2242 2260 2280 SSD
Asin: B0CN998KS9
【Wide Compatibility Support】Pcie 1X 4X / 8X / 16X. M.2 Nvme To Pcie Adapter Card, Corresponding To M-Key / B&M-Key. *Note: Not Support Msata And B Key Interface..
【Safe And Stable】Solid-State Capacitors Are Used For Voltage Regulation, Which Prevents Current Waves From Being Generated In The Event Of Ssd Damage. It Can Operate Stably Under High And Low Temperature Conditions To Protect The Hard Disk. Pcie To M.2 Adapter Size: 140*35Mm (L*W), Compatible With Windows 7/10/11 System, No Driver Is Needed For Win8 And Above System, Driver Is Needed For Ssd In Win7 And Below System..
【High Speed Transfer】The M.2 To Pcie Adapter Card Uses Nvme Protocol And Takes The Pci-E Channel, With A Maximum Read/Write Speed Of 16Gb/S (Theoretical Value), Greatly Reducing The Transfer Time Of Large Files. ※Note: The Actual Transmission Speed Depends On The Interface And Working Environment Of The Device..
【Effective Heat Dissipation】Aluminum Heatsink Design Reduces The Temperature Generated By The Ssd During Operation, Thus Stabilizing The Performance Of The Ssd. This Not Only Stabilizes The Performance Of The Ssd, But Also Extends The Life Of The Drive..
Features
- PCIE NVME adapter Compatible with M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.
- Effective Heat Dissipation Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.
- Wide Compatibility Support PCIe 1X 4X / 8X / 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key / B&M-key. *Note: Not support MSATA and B KEY interface.
- High Speed Transfer The M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum read/write speed of 16Gb/s (theoretical value), greatly reducing the transfer time of large files. Note: The actual transmission speed depends on the interface and working environment of the device.
- Safe and Stable Solid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 2 year manufacture
See On Amazon #6
ELUTENG M.2 NVME SATA SSD Enclosure Aluminum USB 3.2 Gen 2 NVME to USB Adapter 10 Gbps Tool-Free External SSD Reader Supports M and B&M Keys SSDs
Asin: B0CSVT8KF1 | Model: M.2 SATA/NVME Enclosure | PartNumber: M.2 SATA/NVME Enclosure
【Ngff Sata & Nvme Pcie 2-In-1】M.2 Ssd Enclosure Is Suitable For M.2 Nvme M Key/B+M Key And M.2 Ngff Sata B+M Key. Support Ssd Size: 2230/2242/2260/2280. The Maximum Capacity Of Ssd Is 4Tb..
【Wide Application】The M.2 External Encolusre Equipped With Usb Type-A To Type-C And Usb Type-C To Type-C Data Cables, Compatible With Window 7/ 8/ 10/ 11/ Mac Os / Linux Multi-Platform Operation System. Suitable For Connecting Pc, Smart Phone, Tablet, Smart Tv, Smart Router, Ps4 And Other Devices..
【Excellent Heat Dissipation Performance】This Nvme Adapter Shell Is Made Of Aluminum Alloy, Stylish And Texture, Abrasion, Scratch Resistance And Durable. Allowing Heat To Be Transmitted To The Shell In Time, Avoiding Damage To The Hard Disk And Preventing Speed Loss..
【Usb A/C Cable For Any Computer】 This Enclosure Included Usb Cable Has 2 Output Ports, Usb C To A (10Gbps) And Usb C To C (10Gbps), Suitable For Any Computer With Usb A Or Usb C Ports, Easy To Connect Computers, Mobile Phones, Game Consoles, Tablets And Other Devices. (Please Ensure Your Devices With Usb 3.0 Or Up Usb Ports).
Features
- 10Gbps High Speed This NVMe enclosure adopts USB3.2 GEN2 Type-C interface, NVMe SSD can support up to 10Gbps transfer rate, SATA SSD supports up to 5Gbps transfer rate; The M.2 enclosure built in RTL9210B main control chip, support UASP Trim, can reduce CPU load, reduce consumption, greatly improve read and write efficiency.
- USB A/C Cable for Any Computer This Enclosure included USB cable has 2 output ports, USB C to A (10Gbps) and USB C to C (10Gbps), suitable for any computer with usb a or usb c ports, easy to connect computers, mobile phones, game consoles, tablets and other devices. (Please ensure your devices with USB 3.0 or up USB Ports)
- NGFF SATA & NVMe PCIe 2-In-1 M.2 SSD enclosure is suitable for M.2 NVMe M Key/B+M Key and M.2 NGFF SATA B+M Key. Support SSD Size: 2230/2242/2260/2280. The maximum capacity of SSD is 4TB.
- Excellent Heat Dissipation Performance This NVMe adapter shell is made of aluminum alloy, stylish and texture, abrasion, scratch resistance and durable. Allowing heat to be transmitted to the shell in time, avoiding damage to the hard disk and preventing speed loss.
- Wide Application The M.2 external encolusre Equipped with USB Type-A to Type-C and USB Type-C to Type-C data cables, compatible with Window 7/ 8/ 10/ 11/ Mac OS / Linux multi-platform operation system. Suitable for connecting PC, smart phone, tablet, smart TV, smart router, PS4 and other devices.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 1 year
See On Amazon #7
ELUTENG M.2 SATA to SATA Adapter (Not Support NVME/M.2 PCIE) MSATA and B Key/B&M Key M.2 NGFF SDD to 2.5" SATA III 2 in 1 Converter Supports MSATA/M.2 NGFF SSD Not for M Key
Asin: B0BJCYP1ZD | Model: mSATA/M.2 NGFF to SATA | PartNumber: mSATA/M.2 NGFF to SATA
【Not For M.2 Nvme/Pcie Ssd】Before Purchasing, Please Check Your Ssd Label, If It Prints Pcie, Nvme, This Adapter Will Not Support. Only For B Key/B&M Key Ssd..
【Compact Hard Drive Casing】Dissipates Heat Quickly, Drop And Wear Resistant To Reduce Impact. Small Size And Easy To Carry..
【How To Use】Note: Two Hard Disks Cannot Work At The Same Time. Toggle The Switch Up When Reading Ngff Hdd, Toggle The Switch Down When Reading Msata Hdd..
【Support M.2 Sata/Ngff And Msata To Sata】 Note: Not For Nvme/Pcie(M Key) Ssd. If You Are Not Sure If Your Ssd Is Suitable For This Product, Please Contact Us..
Features
- Notice NOT COMPATIBLE with WD SN770/SN 850X/SN 580, Samsung 980/990 PRO/970 EVO, Crucial P3/P3 Plus/T500, Kingston NV2, TEAMGROUP MP44L.
- Support M.2 SATA/NGFF and MSATA to SATA Note: not for NVME/PCIE(M key) SSD. If you are not sure if your ssd is suitable for this product, please contact us.
- Not for M.2 NVME/PCIE SSD Before purchasing, please check your SSD label, if it prints PCIE, NVME, this adapter will not support. Only for B key/B&M key SSD.
- How to use Note: Two hard disks cannot work at the same time. Toggle the switch up when reading NGFF HDD, toggle the switch down when reading MSATA HDD.
- Compact Hard Drive Casing Dissipates heat quickly, drop and wear resistant to reduce impact. Small size and easy to carry.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Dimensions: 0.28 x 3.94 x 2.75 inches
Warranty: 12 months
See On Amazon #8
ELUTENG M.2 SATA (NGFF) to SATA 3.0 Adapter Card (Not Support NVME/M.2 PCIE) Dual NGFF B Key/B&M Key M.2 NGFF SDD to 2.5" SATA III Converter Adapter Support 2230 2242 2260 2280 SSDs
Asin: B0CSVB5624 | Model: M.2 SATA (NGFF) to SATA | PartNumber: M.2 SATA (NGFF) to SATA
【Application】 You Can Use It Directly With An External Hard Drive Cage Using An Easy-Drive Cable Or Install It In The Hard Drive Bay Of A Host Computer Or Laptop..
【Precautions】 Only M.2 Ngff Sata Ssds Are Supported, Nvme And Pci-E Ssds Are Not Supported, Two Ssds Must Be Connected For Simultaneous Use, Ssds Will Be Re-Initialized Upon First Use, Please Back Up Your Hard Drive Data Before Use, When Using, Two When In Use, A Jbod Is Formed Between The Two Hard Disks..
【Easy Installation】 Faster Plug-And-Play, No Additional Drivers Required, And Lightweight For Easy Portability..
【Faster Transmission Performance】 M.2 Ngff Case Is A Sata3.0 External Transfer Interface That Provides A Theoretical Maximum Transfer Rate Of 6Gbps. Note: Transfer Speeds Are Affected By Device Configuration And Ssd Performance And May Deviate From Theoretical Data. Please Be Aware That There May Be Deviations From Theoretical Data..
Features
- NGFF to SATA3.0 M.2 NGFF SSD to SATA conversion adapter for 2230/ 2242/ 2260/ 2280mm size M.2 hard disks, B key and B+M key are supported. Note: Only M.2/NGFF is supported. *Note: Only M.2/NGFF is supported.
- Faster Transmission Performance M.2 NGFF case is a SATA3.0 external transfer interface that provides a theoretical maximum transfer rate of 6Gbps. Note: Transfer speeds are affected by device configuration and SSD performance and may deviate from theoretical data. Please be aware that there may be deviations from theoretical data.
- Application You can use it directly with an external hard drive cage using an easy-drive cable or install it in the hard drive bay of a host computer or laptop.
- Easy Installation Faster plug-and-play, no additional drivers required, and lightweight for easy portability.
- Precautions Only M.2 NGFF SATA SSDs are supported, NVME and PCI-E SSDs are not supported, two SSDs must be connected for simultaneous use, SSDs will be re-initialized upon first use, please back up your hard drive data before use, when using, two When in use, a JBOD is formed between the two hard disks.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 12 months
See On Amazon #9
ELUTENG M.2 SSD Heatsink for PS5 / PC Easy Installation Heat Sink M2 SATA NVME Cooling Sink with 4 Thermal Silicone Pads M.2 SSD Cooler Set Heat Reduction for 2280 WD SanDisk Crucial Kingston Samsung
Asin: B07PS9S2DZ | Model: UA-ELT-M2-HDISP-SET | PartNumber: UA-ELT-M2-HDISP-SET
【Double-Sided Quick Cooling】 Groove Design M.2 2280 Heatsink, Greatly Increase The Heat Dissipation Area, With 10°C - 25°C Cooling Effect (Varies Depending On The Environments), Cooling The M.2 Ssd To A Safe Temperature Quickly And Improving The Performance Of Your Computer..
【Phase Change Thermal Conductivity Technology】 The Use Of High-Coefficient Phase Change Thermal Silicon Wafers Greatly Improves Thermal Conductivity. Long-Term Use Of Phase Change Materials, Thermal Conductivity Will Be Better..
【Durable Material】 Alloy Aluminum Oxidation Greatly Improves The Corrosion Resistance, Hardness, Wear Resistance, Insulation, Heat Resistance Of The Ngff Nvme Cooler, And Prolongs The Service Life..
【Easy To Install】 Make Precise And Close Fitting, Easy To Install, And Not Damage The Hard Disk..
Features
- Reliable Heat Sink Both PS5 SSD Heatsinks are available for the M.2 2280 SSD. Including a screw fixing heat sink, rubber band fixing heat sink, screws, rubber ring and thermal silicone pad. Compatible with Samsung 850 EVO SSD and more. if you get red one accidentally,please contact us to get extra reward.
- Easy to install Make precise and close fitting, easy to install, and not damage the hard disk.
- Double-Sided Quick Cooling Groove design M.2 2280 heatsink, greatly increase the heat dissipation area, with 10 C - 25 C cooling effect (Varies depending on the environments), cooling the M.2 SSD to a safe temperature quickly and improving the performance of your computer.
- Durable Material Alloy aluminum oxidation greatly improves the corrosion resistance, hardness, wear resistance, insulation, heat resistance of the NGFF NVME cooler, and prolongs the service life.
- Phase Change Thermal Conductivity Technology The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
See On Amazon #10
ELUTENG M.2 to USB C Adapter USB 3.1 Gen 2 to NVMe PCI-E M.2 SSD Converter Reader 10 Gbps Based M Key Support UASP for 2280 2260 2242 2230 SSD (Only for M.2 NVME)
Asin: B0CQ8FFC5T | Model: M.2 NVME to USB C | PartNumber: M.2 NVME to USB C
【4Tb Large Capacity】Up To 4Tb Ssd Can Be Installed. Backward Compatible With Usb C 3.0 / Usb C 2.0 Interface, Read Speed: 1000Mb/S (This Data Is For Reference Only). Compatible With Windows 7/8/10 / Mac Os / Linux Systems..
【Easy To Use】 M.2 Nvme Compatible. Comes With Screws And Screwdriver, Easy To Install And Portable..
【Heat Dissipation Design】 Pcba Board Surface Is Processed With Copper Rod To Prevent Abnormal Heat Generation Of The Product. Heat Dissipating Silicon Based Chip Design Is Used. In Addition, A Heat Dissipation Silicone Patch Is Included To Effectively Prevent Excessive Temperature..
【High Speed & Stability】The External Output Port Is Usb3.1 Gen2 Usb Type-C. The Theoretical Transfer Speed Is 10 Gbps For Nvme Protocol, With A Substantial Increase In Read Speed And A Rise In Transfer Speed For Large Files; Using Jms583 Chip With Uasp And Trim Functions. Reduced Cpu Load, Lower Consumption, Faster Speed And Higher Durability..
Features
- Compatible with M.2 NVME Eluteng NVME compatible hard drive enclosure, it supports M.2 NVME in 2230/2242/2260/2280mm sizes, compatible with M-key(Not for B-Key and B&M-Key). Note: M.2 NGFF, PCI-E AHCI protocol is not supported.
- High Speed & Stability The external output port is USB3.1 GEN2 USB Type-C. The theoretical transfer speed is 10 Gbps for NVME protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using JMS583 chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
- 4TB large Capacity Up to 4TB SSD can be installed. Backward compatible with USB C 3.0 / USB C 2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems.
- Heat Dissipation Design PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature.
- Easy to Use M.2 NVME compatible. Comes with screws and screwdriver, easy to install and portable.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 12 months
See On Amazon #11
ELUTENG 4 PCS M.2 NVMe Heatsink with 4 Thermal Silicone Pads Aluminum 2280 SSD Heat Sink with 8 Black Rubber Bands for PC / PS5 M.2 PCIE NVMe SSD or M.2 SATA SSD
Asin: B0CR69GG3W
【Unique Dual Installation Solution】 Metal Clips + Rubber Bands For M.2 Ssd Installation. No Need To Worry About Rubber Bands Material Aging Or Ssd Long Time High-Temperature Operation..
【Wide Used】 Compatible With Pcie Nvme M.2 Ssd, Size About 0.87 X 3.15In (22 X 80Mm), M.2Ssd/ Ngff Ssd/ Nvme Ssd/Ssd Etc. Can Be Used Perfectly..
【With A Thermal Pad】 To Conduct Heat From M.2 Ssd To M.2 Heatsink, The Thermal Pad Is Put Between M.2 Ssd And M.2 Heatsink. Thermal Pads Are Low Viscosity, Thermally Conductive And Insulating..
【Durable Material】 Alloy Aluminum Oxidation Greatly Improves The Corrosion Resistance, Hardness, Wear Resistance, Insulation, Heat Resistance Of The Ngff Nvme Cooler, And Prolongs The Service Life..
Features
- Double-Sided Quick Cooling Groove design M.2 2280 heatsink, greatly increase the heat dissipation area, with 10 C - 25 C cooling effect (varies depending on the environments), cooling the M.2 SSD to a safe temperature quickly and improving the performance of your computer.
- Durable Material Alloy aluminum oxidation greatly improves the corrosion resistance, hardness, wear resistance, insulation, heat resistance of the NGFF NVME cooler, and prolongs the service life.
- Unique Dual Installation Solution Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation.
- With a Thermal Pad To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. Thermal pads are low viscosity, thermally conductive and insulating.
- Wide Used Compatible with PCIe NVMe M.2 SSD, size about 0.87 x 3.15in (22 x 80mm), M.2SSD/ NGFF SSD/ NVME SSD/SSD etc. can be used perfectly.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
See On Amazon #12
ELUTENG for Rog Ally 2230 to 2280 Adapter PCI-E 4.0 NVME M-Key 90 Degree Angled Extension SSD Conversion Adapter 5Pin with Screwdriver Compatible with ROG Ally Gaming
Asin: B0CSVTB635
The 90 Degree Design Fits Into The Body Of The Rog Ally Smart Handheld Device,Which Provides Higher Transfer Speeds And Larger Storage Capacity To Meet Users' Needs For High Speed, High Capacity Storage..
Note: M.2 Ngff Hard Drives Are Not Supported. The Installation Of This Expansion Board Card Requires A Certain Degree Of Technical And Operational Skills, Which Is Recommended To Install And Use It Under The Guidance Of Professionals..
If You Have Just Collected Your Ally Handheld Games Console And Would Like To Expand Its Storage Or Have Found Yourself Running Out Of Space For Your Library Of Games. Once Installed, You Can Enjoy Up To 8Tb Of Space..
Operation Method: 1St Step: The 2280 Ssd Hard Disk To Be Replaced Into The Expansion Board Card, Ready For The Operation Of The System Cloning. 2Nd Step: Boot Into The System, Connect The Hard Disk, And Open Diskgenius, Use The "System Migration" Function Will Be The Original Hard Disk System Disk Cloning To The New Hard Disk..
Features
- The adapter is compatible with ROG Ally Gaming 2230 NVME to 2280 NVME extension, it can't convert NVME to SATA, also can't convert SATA to NVME.
- Operation method: 1st step: the 2280 SSD hard disk to be replaced into the expansion board card, ready for the operation of the system cloning. 2nd step: boot into the system, connect the hard disk, and open DiskGenius, use the system migration function will be the original hard disk system disk cloning to the new hard disk.
- The 90 degree design fits into the body of the ROG ALLY smart handheld device,which provides higher transfer speeds and larger storage capacity to meet users' needs for high speed, high capacity storage.
- If you have just collected your Ally handheld games console and would like to expand its storage or have found yourself running out of space for your library of games. Once installed, you can enjoy up to 8TB of space.
- Note: M.2 NGFF hard drives are not supported. The installation of this expansion board card requires a certain degree of technical and operational skills, which is recommended to install and use it under the guidance of professionals.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Warranty: 12 months
See On Amazon #13
ELUTENG M.2 NGFF to SATA Adapter Card B Key / B & M Key SSD Converter NGFF M2 to 2.5 Inch SATA III Drivers for NGFF M.2 2280 2260 2242 2230 SSD (Not for M.2 NVME)
Asin: B07VX615T9 | Model: NGFF to SATA | PartNumber: NGFF to SATA
【Support M2 Ssd】2280 / 2260 / 2242 / 2230Mm M.2 Ngff(Sata) Ssd, And Sata 3 Interface With Max Transfer Rate Up To 6Gbps..
【Easy Installation】No Driver Required. Any Questions About M.2 Sata Converter, Please Feel Free To Contact Us. Note: The Installed Screwdriver Is Randomly Matched, It May Be Black Or Green. Package: M2 To Sata Drive Converter Card * 1 Screwdriver * 1 Screws * 1.
【Stable Transmission】Adopt Large Capacity Capacitance, High Power Ldo Control Chip, Ensure More Stable Performance, And Enjoy Faster Transmission. Note: 6Gbps Is The Theoretical Transfer Speed, The Actual Transfer Speed Depends On The Ssd And The Performance Of The Computer Interface..
【Notice】Not Support Any Pcie Nvme / Ahci Key M Ssd. If You Have A Brand New Ssd, Please Format The Ssd Before Use. Otherwise, It May Not Be Recognized By The Computer..
Features
- M2 SDD to SATA Adapter Easily convert ngff SATA Key B / B+M ssd to a external 7+15 pin solid state drive card, add extra storage space for your laptop and desktop.
- Notice NOT support any PCIe NVMe / AHCI Key M SSD. If you have a brand new ssd, please format the ssd before use. Otherwise, it may not be recognized by the computer.
- Support M2 SSD 2280 / 2260 / 2242 / 2230mm M.2 NGFF(SATA) SSD, and sata 3 interface with max transfer rate up to 6Gbps.
- Stable Transmission Adopt large capacity capacitance, high power LDO Control chip, ensure more stable performance, and enjoy faster transmission. Note: 6GBPS is the theoretical transfer speed, the actual transfer speed depends on the SSD and the performance of the computer interface.
- Easy installation No driver required. Any questions about m.2 sata converter, please feel free to contact us. Note: The installed screwdriver is randomly matched, it may be black or green. Package: M2 to SATA Drive Converter Card * 1 Screwdriver * 1 Screws * 1
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Weight: 0.07 Pounds
See On Amazon #14
ELUTENG M.2 Enclosure for SATA B/B+M Key NGFF External SSD Reader (NOT for NVME) and Writer Superspeed 5Gbps M2 HDD to USB 3.0 Adapter with UASP, Support NGFF M.2 2230 2242 2260 2280
Asin: B07H95GRSQ | Model: 8541664133 | PartNumber: 8541664133
✎ Easy Installation Ngff To Usb Adapter, Support M.2 Ssd:2230/2242/2260/2280Mm..
✎ Plug And Play, No Extra Driver Required, Widely Compatible With Win10 / 8 / 7 / Vista / Xp / Linux. If You Meet Any Use Problem,Pls Feel Free To Contact Us..
✎ With Esd (Electro-Static Discharge), Protect Your Ssd. With Sponge Mat On The Lid, To Reduce Vibration..
✎ Usb 3.0 High Speed Interface, Transmission Rate Up To 5Gbps, Support Uasp, 10 Times Faster Than Usb 2.0..
Features
- M.2 SSD hard drive enclosure, ONLY support M.2 NGFF SATA SSD B key / B+M key, **NOT Support M key , or any PCIE / Nvme SSD interface. **Please format your new ssd before using it, otherwise, it may not be recognized on PC.
- USB 3.0 high speed interface, Transmission rate up to 5Gbps, support UASP, 10 times faster than USB 2.0.
- Easy installation NGFF to USB adapter, support M.2 SSD:2230/2242/2260/2280mm.
- With ESD (Electro-Static discharge), protect your SSD. With sponge mat on the lid, to reduce vibration.
- Plug and play, no extra driver required, widely compatible with Win10 / 8 / 7 / VISTA / XP / Linux. If you meet any use problem,pls feel free to contact us.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
Dimensions: 0.39 x 3.78 x 1.50 inches | Weight: 0.17 Pounds
See On Amazon #15
ELUTENG M.2 to USB Adapter M.2 NVME/NGFF Hard Drive with mSATA to USB 3.0 Adapter
Asin: B0C9DFMNN9
【4Tb Large Capacity】Up To 4Tb Ssd Can Be Installed. Backward Compatible With Usb3.0/Usb2.0 Interface, Read Speed: 1000Mb/S (This Data Is For Reference Only). Compatible With Windows 7/8/10 / Mac Os / Linux Systems..
【Easy To Use】 Ngff/Nvme Compatible. Comes With Screws And Screwdriver, Easy To Install M.2 Nvme And Ngff (Sata), Easy To Use And Portable..
【Heat Dissipation Design】 Pcba Board Surface Is Processed With Copper Rod To Prevent Abnormal Heat Generation Of The Product. Heat Dissipating Silicon Based Chip Design Is Used. In Addition, A Heat Dissipation Silicone Patch Is Included To Effectively Prevent Excessive Temperature..
【High Speed & Stability】The External Output Port Is Usb3.1 Gen2 Usb Type-A. The Theoretical Transfer Speed Is 10 Gbps For Nvme Protocol And 5 Gbps For Ngff Protocol, With A Substantial Increase In Read Speed And A Rise In Transfer Speed For Large Files; Using Rtl9210b Chip With Uasp And Trim Functions. Reduced Cpu Load, Lower Consumption, Faster Speed And Higher Durability..
Features
- Compatible with M.2 NVME and NGFF (SATA) Eluteng NGFF/NVME compatible hard drive enclosure, M.2 corresponds to two different hard drives. It supports M.2 NVME or NGFF (SATA) in 2230/2242/2260/2280mm sizes. Compatible with B-key, M-key and B+M-key. Meet the needs of different scenarios and save time, effort and money by eliminating the need to deploy two additional hard drives! Note: PCI-E AHCI protocol is not supported.
- High Speed & Stability The external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol and 5 Gbps for NGFF protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using RTL9210B chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
- 4TB large capacity Up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems.
- Heat Dissipation Design PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature.
- Easy to use NGFF/NVME compatible. Comes with screws and screwdriver, easy to install M.2 NVME and NGFF (SATA), easy to use and portable.
- See more on Amazon...
Brand: ELUTENG
See On Amazon #16
ELUTENT USB Type C M2 NVME Enclosure USB 3.1 Gen2 PCIe M.2 SSD Box 10Gbps PCIe NVME Adapter with USBC to USBC Cable + USBC to USB 3.0 Cable for M-Key NVME SSD 2230/2242/2260/2280, Support UASP
Asin: B08GWSRKVH
[Fast Heat Dissipation] Double-Sided Copper Plating, Porous Heat Dissipation; Aluminum Panel To Increase The Heat-Conducting Area; Built-In Heat-Dissipating Silicone Grease To Quickly Dissipate Heat. Extend The Life Of Your Hard Drive..
[Wide Compatibility] Support Win10 / 8 / 7 / Vista / Xp / Linux And Macos 10 Or Higher Systems. With Usb C Male To Male Cable And Usb C Male To Usb3.0 Male Cable To Meet Different Needs..
[Easy To Use] No Tools, Easy To Install; Plug And Play, No Need To Drive; Blue Led Indicator, Always On Standby, Flashing When Reading And Writing, Easy To View Working Status..
[Ultra High Speed Transmission] Usb Type C Interface, The Transmission Speed Is Up To 10Gbps(Theoretical Value), The Measured Read And Write Speed Is Up To 900+Mb/S. The Device Interface And Working Environment Will Affect The Actual Reading Speed. When Connected To A Usb 2.0 Interface, Only Usb 2.0 Speeds Can Be Reached.※※※※ Uasp Supported, Please Check In Advance Whether The Pc Has Uasp Function.
Features
- [USB Type C to M.2 HDD Enclosure] PCIe NVME to USB adapter supports M.2 NVMe M key SSD 22x30 / 22x42 / 22x60 / 22x80. Note: Any M.2 NGFF SSD for SATA / PCIE AHCI protocol is not supported. Before using the new hard disk, please format it so that the computer can recognize it
- [Ultra High Speed Transmission] USB Type C interface, the transmission speed is up to 10Gbps(Theoretical value), the measured read and write speed is up to 900+MB/S. The device interface and working environment will affect the actual reading speed. When connected to a USB 2.0 interface, only USB 2.0 speeds can be reached. UASP supported, please check in advance whether the PC has UASP function
- [Fast Heat Dissipation] Double-sided copper plating, porous heat dissipation; aluminum panel to increase the heat-conducting area; built-in heat-dissipating silicone grease to quickly dissipate heat. Extend the life of your hard drive.
- [Easy to use] No tools, easy to install; plug and play, no need to drive; blue LED indicator, always on standby, flashing when reading and writing, easy to view working status.
- [Wide Compatibility] Support Win10 / 8 / 7 / VISTA / XP / Linux and MACOS 10 or higher systems. With USB C male to male cable and USB C male to USB3.0 male cable to meet different needs.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
See On Amazon #17
ELUTENG M.2 to USB Adapter M.2 NVME/NGFF Hard Drive with USB C SSD Enclosure 2.5 inch External Hard Drive Case
Asin: B0C9DQPXW4
【4Tb Large Capacity】Up To 4Tb Ssd Can Be Installed. Backward Compatible With Usb3.0/Usb2.0 Interface, Read Speed: 1000Mb/S (This Data Is For Reference Only). Compatible With Windows 7/8/10 / Mac Os / Linux Systems..
【Easy To Use】 Ngff/Nvme Compatible. Comes With Screws And Screwdriver, Easy To Install M.2 Nvme And Ngff (Sata), Easy To Use And Portable..
【Heat Dissipation Design】 Pcba Board Surface Is Processed With Copper Rod To Prevent Abnormal Heat Generation Of The Product. Heat Dissipating Silicon Based Chip Design Is Used. In Addition, A Heat Dissipation Silicone Patch Is Included To Effectively Prevent Excessive Temperature..
【High Speed & Stability】The External Output Port Is Usb3.1 Gen2 Usb Type-A. The Theoretical Transfer Speed Is 10 Gbps For Nvme Protocol And 5 Gbps For Ngff Protocol, With A Substantial Increase In Read Speed And A Rise In Transfer Speed For Large Files; Using Rtl9210b Chip With Uasp And Trim Functions. Reduced Cpu Load, Lower Consumption, Faster Speed And Higher Durability..
Features
- Compatible with M.2 NVME and NGFF (SATA) Eluteng NGFF/NVME compatible hard drive enclosure, M.2 corresponds to two different hard drives. It supports M.2 NVME or NGFF (SATA) in 2230/2242/2260/2280mm sizes. Compatible with B-key, M-key and B+M-key. Meet the needs of different scenarios and save time, effort and money by eliminating the need to deploy two additional hard drives! Note: PCI-E AHCI protocol is not supported.
- High Speed & Stability The external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol and 5 Gbps for NGFF protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using RTL9210B chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
- 4TB large capacity Up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems.
- Heat Dissipation Design PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature.
- Easy to use NGFF/NVME compatible. Comes with screws and screwdriver, easy to install M.2 NVME and NGFF (SATA), easy to use and portable.
- See more on Amazon...
Brand: ELUTENG
See On Amazon
Looking For Something Else?
Search