DT-DIATOOL Hex Shank Dry Diamond Drill Bits Kit for Porcelain Tile Ceramic Granite Marble Masonry Concrete Diameter 5 6 8 10 12mm (Kit No.2
Asin: B07MH4LVSS | Model: DT969K2 | PartNumber: DT969K2 | Ean: 0734602264460 | UPC: 734602264460
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Use】There Is Wax Inside The Drill Bit. No Need For Additional Water Cooling And Increases Drilling Speed..
【Attention】Hold The Drill Bit At A 45 Degree Angle Until The Bit Begins To Penetrate The Material, Then Raise The Bit To The Vertical Position And Continue.Applying Too Much Pressure Won't Make The Drill Faster, But It Will Generate Too Much Heat, Reducing Efficiency And Longevity..
【Application】Suitable For All Tiles, Marble, Artificial Stone, Granite, Stoneware And Quartz.Hex Shank,Used On Hand Drill, Bench Drill, Etc. Recommended Rpm: 2000-5000Rpm.Please Do Not Use Hammer Drill Model..
【Vacuum Brazed Diamond Technology】High-Density Diamonds Are Brazed More Firmly To The Matrix And Provide Longer Service Life. #35/50 Diamond Is Sharp To Drill Holes In The Ceramic And Porelain Tiles.Diamond Grit:#35/40.
Features
- Specification Drill bits 5mm/6mm: total length 68mm,diamond height 10mm. Drill bits 5/16"(8mm)-14mm:total length 80mm,diamond height 10mm.
- Vacuum Brazed Diamond Technology High-density diamonds are brazed more firmly to the matrix and provide longer service life. #35/50 diamond is sharp to drill holes in the ceramic and porelain tiles.Diamond grit:#35/40
- Easy to use There is wax inside the drill bit. No need for additional water cooling and increases drilling speed.
- Application Suitable for all tiles, marble, artificial stone, granite, stoneware and quartz.Hex Shank,used on hand drill, bench drill, etc. Recommended RPM: 2000-5000RPM.Please do not use hammer drill model.
- Attention Hold the drill bit at a 45 degree angle until the bit begins to penetrate the material, then raise the bit to the vertical position and continue.Applying too much pressure won't make the drill faster, but it will generate too much heat, reducing efficiency and longevity.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 3.15 x 0.31 x 0.31 inches
See On Amazon Similar To DTDIATOOL Hex Shank Dry Diamond
#1
DT-DIATOOL Diamond Core Drill Bits 8pcs - 19/25/35/51/76mm+20mm Diamond Finger Bit+50mm Diamond Chamfer Bit and SDS Adapter Hole Saw Kit for Porcelain Ceramic Tile Marble Granite
Asin: B0BYYRYD1C | Model: DT965K11T | PartNumber: DT965K11T | Ean: 0791180060037 | UPC: 791180060037
Multi-Use: Drill Bits For Drilling Holes; Chamfer Bit For Enlarging Or Shaping The Holes And Edging Grinding Of Applicable Material..
Suitable For Ceramic Tile, Porcelain Tile, Granite, Marble,Etc. Not Recommend Drilling Concrete..
All Bits Are Produced In Vacuum Brazed Technology, Longer Life Than Electroplated Drill Bits. U Shape Incision, Reduce Cutting Resistance And Improve Drilling Speed..
5/8"-11 Female Thread, Used On 5/8” Thread Angle Grinder. Recommended Rpm: 6000; Maximum Rpm:11000. Please Don’T Use The Hammer Mode If You Use The Drill Bits On Electric Drill Through The Sds Adapter..
Features
- 8pcs/set. 19/25/35/51/76mm diamond drill bits: Total length 75mm, diamond height 15mm; workable length: 50mm. Grit: #35/40; 2"(50mm)Diamond chamfer bit: workable length 46mm; Chamfer angle: top angle 60 degree;Grit:#80/#100.4/5"(20mm) diamond finger bit: total length 65mm, workable length 35mm. Grit #50/60.
- 5/8-11 female thread, used on 5/8 thread angle grinder. Recommended RPM: 6000; Maximum RPM:11000. Please don t use the hammer mode if you use the drill bits on electric drill through the SDS adapter.
- Multi-use: Drill bits for drilling holes; Chamfer bit for enlarging or shaping the holes and edging grinding of applicable material.
- All bits are produced in vacuum brazed technology, longer life than electroplated drill bits. U Shape incision, reduce cutting resistance and improve drilling speed.
- Suitable for ceramic tile, porcelain tile, granite, marble,etc. Not recommend drilling concrete.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #2
DT-DIATOOL Diamond Drill Bits Set Tile Hole Saw 1/4 5/16 3/8" for Dry Drilling Porcelain Ceramic Granite Marble Masonry Stone(6/6/6/8/10mm, 5-Pack)
Asin: B0BMPJ115R | Ean: 0791180060334 | UPC: 791180060334
Carbide Triangular Drill Bit: Total Length 77Mm. Used To Provide Accurate Positioning For Diamond Bit, Not For Drilling..
Applicable Machines: Electric Hand Drill, Bench Drill, Etc; Please Ensure That The Drill Speed Is Over 2000Rpm. The Higher The Drilling Speed, The Longer The Product Life..
Operation: Drilling For Granite, Porcelain Tile, Ceramic Tile, Marble, Stone, Masonry..
Quick-Fit Shank Drill Bits: Diameter 1/4”(6Mm), Total Length 68Mm, Diamond Height 10Mm. Diameter 5/16”(8Mm),3/8"(10Mm), Total Length 80Mm, Diamond Height 10Mm. Wax Inside For Cooling, Dry Drilling Without Water..
Features
- Total 5pcs/set: 4pcs quick-fit hex shank drill bits(6/6/8/10mm) + 1pc 6mm carbide triangular drill bit.
- Quick-fit Shank drill bits: diameter 1/4 (6mm), total length 68mm, diamond height 10mm. Diameter 5/16 (8mm),3/8(10mm), total length 80mm, diamond height 10mm. Wax inside for cooling, dry drilling without water.
- Carbide triangular drill bit: total length 77mm. Used to provide accurate positioning for diamond bit, not for drilling.
- Operation: Drilling for granite, porcelain tile, ceramic tile, marble, stone, masonry.
- Applicable machines: Electric hand drill, bench drill, etc; Please ensure that the drill speed is over 2000RPM. The higher the drilling speed, the longer the product life.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.59 x 3.35 x 2.36 inches
See On Amazon #3
BTBLBITS Diamond Finger Milling Bits 3/4 Inch (20mm) Diamond Milling Bit Hole Saw Drill Bits for Holes Enlarging Shaping Trimming in Porcelain Tile Marble Granite Hard Ceramic 5/8"-11 Threads
Asin: B09VPTVJYQ | Model: BTBLBITS-20MM | PartNumber: BTBLBITS-20MM
【Application】: Versatile Diamond Finger Milling Bits Are Designed To Enlarge, Shape And Round Bevel Existing Holes In Porcelain, Hard Ceramic, Granite And Marble And Is Also Suitable To Create Round Side Indentation Necessary To Accommodate Pipes Or Electric Wire Lines. You Can Use Our Milling Finger Bit To Expand Existing Holes To Different Sizes Or Shapes, No Need To Purchase Several Core Drill Bits. Great For Granite, Porcelain,Ceramic Or Marble Countertops, Bathroom Tiles..
【Tips】: With 5/8-Inch-11 Arbor, 5/8"-11 Thread, Used On Angle Grinder,Can't Drill Or Make Holes And Be Designed To Shape And Enlarge Existing Holes.Machine: Any Standard Grinder, And Can Be Used With Or Without Water..
【Material】: High Hardness And Strength. This Vacuum Brazed Diamond Finger Bits Milling Bits Are Made Of Premium Diamond And Durable Metal..
【Size】：Diameter 3/4" (20Mm), Connection 5/8"-11 Thread, Workable Length: 2" (50Mm), Total Length: 2-1/2" (65Mm), Grit: #50/60..
Features
- Package content 1pc 3/4 inch 20MM Vacuum Brazed Diamond finger bit Diamond Milling bit for tile, stone, Porcelain Hard Ceramic Granite and Marble
- Size Diameter 3/4 (20mm), Connection 5/8-11 thread, Workable Length: 2 (50mm), Total Length: 2-1/2 (65mm), Grit: #50/60.
- Application : Versatile diamond finger milling bits are designed to enlarge, shape and round bevel existing holes in Porcelain, Hard Ceramic, Granite and Marble and is also suitable to create round side indentation necessary to accommodate pipes or electric wire lines. You can use our milling finger bit to expand existing holes to different sizes or shapes, no need to purchase several core drill bits. Great for granite, porcelain,ceramic or marble countertops, bathroom tiles.
- Material : High hardness and strength. This Vacuum Brazed Diamond finger bits Milling bits are made of premium diamond and durable metal.
- Tips : With 5/8-Inch-11 arbor, 5/8-11 thread, used on angle grinder,can't drill or make holes and be designed to shape and enlarge existing holes.Machine: any Standard Grinder, and can be used with or without water.
- See more on Amazon...
Brand: BTBLBITS | Manufacturer: BTBLBITS
Dimensions: 0.79 x 2.56 x 0.79 inches
See On Amazon #4
FACHLICH 20mm Diamond Milling Bits for Porcelain Ceramic Marble Granite Existing Holes Enlarging Shaping
Asin: B0865LDVS5 | Model: F97812058 | PartNumber: F97812058 | Ean: 0739929079056 | UPC: 739929079056
Produced In Vacuum Brazed Technology Which Could Provide High Efficient Working Performance.
Grit #50/60 Provide You Great Finishing; With 5/8"-11 Thread, Used On Angle Grinder, Very Easy To Operate.
Enlarge, Shape And/Or Round Bevel Existing Holes In Porcelain, Hard Ceramic, Marble And Granite.
Diameter: 20Mm, Workable Length: 50Mm, Grit: #50/60, Total Length: 65Mm.
Features
- 20mm vacuum brazed Milling Bits for porcelian tile granite and all similar material
- Diameter: 20mm, Workable length: 50mm, Grit: #50/60, Total length: 65mm
- Produced in vacuum brazed technology which could provide high efficient working performance
- Enlarge, shape and/or round bevel existing holes in Porcelain, Hard Ceramic, marble and granite
- Grit #50/60 provide you great finishing; With 5/8-11 thread, used on angle grinder, very easy to operate
- See more on Amazon...
Brand: FACHLICH | Manufacturer: FACHLICH
Weight: 0.00 pounds
See On Amazon #5
DT-DIATOOL Diamond Beveling Chamfer Bit 3 Inch for Tile Granite Marble Existing Holes Enlarging Polishing Shaping Holes of Size from 1/4 Inch to 3 Inch
Asin: B0CBPPVLQ5 | Ean: 0759039781106 | UPC: 759039781106
Diamond Grit #80/100 Is Sharper. It Helps To Reduce The Risk Of Tile Cracking When Under Tension; Wet Or Dry Use..
Vacuum Brazing Technology Keeps Premium Diamonds More Firmly And Durable. Best Work Effect And Longer Life..
Recommended Machine: 5/8" Arbor Angle Ginder. Recommended Rpm:6000. Max Rpm:11000..
Not For Drilling Holes, But Designed To Enlarge, Shape, Polish, Clean, Trim, Finish, Round Or Bevel Existing Rough Holes Of Marble Ceramic Porcelain Tiles Granite..
Features
- 1 piece 3 inch diamond beveling chamfer bit, without adapter. Diameter 75mm;Workable length 70mm;Total Length 80mm.Chamfer angle: top angle 54 degree; Grit:#80/#100.
- Not for drilling holes, but designed to enlarge, shape, polish, clean, trim, finish, round or bevel existing rough holes of marble ceramic porcelain tiles granite.
- Diamond grit #80/100 is sharper. It helps to reduce the risk of tile cracking when under tension; Wet or dry use.
- Recommended machine: 5/8 arbor angle ginder. Recommended RPM:6000. Max RPM:11000.
- Vacuum brazing technology keeps premium diamonds more firmly and durable. best work effect and longer life.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #6
DT-DIATOOL Daimond Core Drill Bit - Vaccum Brazed Hole Saw 6 8 10mm 3pcs with 5/8"-11 Thread Drilling for Procelain Tile Ceramic Stoneware Marble Granite Stone Brick
Asin: B07JDZSJ54 | Model: DT9656210S7 | PartNumber: DT9656210S7 | Ean: 0734602258285 | UPC: 734602258285
Recommend Machine: 5/8" Arbor Angle Grinder. Recommended Rpm:6000. Maximum Rpm:11000.If You Fit Them On Hand Drills, You Need An Adapter, Such As Sds, Hex, Round Plus Shank, Etc.Do Not Use Hammer Mode..
Fast And Smooth Drilling And Less Chipping. Wax Inside For Cooling The Bits..
Vaccum Brazing Technology Enables A Strong Bond Between Diamond, Bond And Substrate, Greatly Improving Tool Life And Machining Efficiency..
Dry Or Wet Drilling For Porcelain Tile,Ceramic, Granite, Marble, Stone, Ect..
Features
- Diameter 6/8/10mm: 5/8"-11 thread, total length 60mm; diamond height 10mm; max working depth 35mm; Grit: #35/40.
- Dry or wet drilling for porcelain tile,ceramic, granite, marble, stone, ect.
- Recommend Machine: 5/8 arbor angle grinder. Recommended RPM:6000. Maximum RPM:11000.If you fit them on hand drills, you need an adapter, such as SDS, hex, Round plus shank, etc.Do not use hammer mode.
- Vaccum brazing technology enables a strong bond between diamond, bond and substrate, greatly improving tool life and machining efficiency.
- Fast and smooth drilling and less chipping. Wax inside for cooling the bits.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOO
See On Amazon #7
DT-DIATOOL Diamond Core Drill Bits Set - 6/8/10/25/35/50/65mm Tile Hole Saw + 10mm Diamond Milling/Finger Bit + 50mm Diamond Chamfer Bit + Hex Adapter for Porcelain Tile Ceramic Marble Granite
Asin: B0CM5YNZZC | Ean: 0759039777697 | UPC: 759039777697
【Machine】Angle Grinder. Recommend Rpm: 6000. Max Rpm: 11000. Please Try To Get As Close As Possible To The Recommended Drilling Speed To Help Prolong Service Life. If You Fit Them On Hand Drills, You Can Use Hex Adapter. And Don't Use Hammer Or Impact Mode..
【Long Life】Vaccum Brazed Technology Enables A Stronger Bond Between Diamond, Bond And Substrate, Greatly Improving The Drill Bit's Life And Work Fficiency..
【Fast Drilling】Serrated Special Cutter Head Greatly Improves Sharpness And Drilling Speed; Serrated Cutter Head Has Several Chip Removal Slots, Dust Can Be Quickly Discharged When Drilling, Not Easy To Be Clogged..
【Application】Dry Or Wet Use In Ceramic Tile, Porcelain Tile, Marble And Granite. Wet Use Extends Life. Not For Wood, Glass And Any Metal Material. Diamond Milling Bit And Chamfer Bit Cannot Be Used For Drilling, Just For Enlarging, Trimming Or Beveling Holes..
Features
- Specification 7pcs Core Drill Bit Diameter 6/8/10/25/35/50/65mm, diamond height 10mm, Thread: 5/8"-11; Diamond grit: #35/40. 1pc diamond milling bit 10mm, total length 65mm,diamond height 40mm;diamond grit #45/50. 1pc diamond chamfer bit diameter 50mm, total length 55mm, diamond height 46mm; diamond grit #80. 1pc 5/8" tharead to hex adapter.
- Application Dry or wet use in ceramic tile, porcelain tile, marble and granite. Wet use extends life. Not for wood, glass and any metal material. Diamond milling bit and chamfer bit cannot be used for drilling, just for enlarging, trimming or beveling holes.
- Machine Angle Grinder. Recommend RPM: 6000. Max RPM: 11000. Please try to get as close as possible to the recommended drilling speed to help prolong service life. If you fit them on hand drills, you can use hex adapter. And don't use hammer or impact mode.
- Fast drilling Serrated special cutter head greatly improves sharpness and drilling speed; Serrated cutter head has several chip removal slots, dust can be quickly discharged when drilling, not easy to be clogged.
- Long life Vaccum brazed technology enables a stronger bond between diamond, bond and substrate, greatly improving the drill bit's life and work fficiency.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Warranty: If the product is found to be deformed due to shipping or received in error after opening the package, it will be replaced free of charge within 90 days.
See On Amazon #8
DT-DIATOOL Diamond Finger Milling Bit 15mm 2-Pack Hex Shank Enlarging Existing Holes of Porcelain Tile Marble Countertop Vacuum Brazed Diamond Grinding Bit
Asin: B0CF1T9XG6 | Ean: 0759039780260 | UPC: 759039780260
Advanced Technology And Design: The #50/60 Diamond Particles Cover The Work Surface, Reducing Debris And Breakage For A Better Finish. Internal Hollow Design, More Convenient For Heat Dissipation And Chip Removal..
Machine: Hand Drill. Don’T Use Hammer Mode. The Speed Of Hand Drills Is Generally In The Range Of 2000Rpm To 5000 Rpm. Please Use The Product At The Highest Possible Speed Within This Range For Longer Service Life..
Recommended Materials: Porcelain Tile, Ceramic Tile, Marble, Artificial Stone, Granite, Etc..
Application: Please Don’T Use It For Drilling Holes. Mainly Used For Existing Holes; For Enlarging, Reaming, Cleaning Rough Holes Or Repairing Edge. Also Can Grind A Curved Chamfer On The Edge Of The Tile..
Features
- Specification: Hex Shank; Diameter 15mm; work length 40mm; total length 65mm; diamond grit #50/60.
- Application: Please don t use it for drilling holes. Mainly used for existing holes; For enlarging, reaming, cleaning rough holes or repairing edge. Also can grind a curved chamfer on the edge of the tile.
- Advanced technology and design: The #50/60 diamond particles cover the work surface, reducing debris and breakage for a better finish. Internal hollow design, more convenient for heat dissipation and chip removal.
- Recommended materials: porcelain tile, ceramic tile, marble, artificial stone, granite, etc.
- Machine: Hand drill. Don t use hammer mode. The speed of hand drills is generally in the range of 2000RPM to 5000 RPM. Please use the product at the highest possible speed within this range for longer service life.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
See On Amazon #9
Diamond Tile Drill Bit Set,DT-DIATOOL Porcelain Hole Saw with Hex Shank Double Ended 6-6mm 5pcs for Drilling Ceramic Marble Artificial Stone Granite
Asin: B0BFDRRGPC | Model: DT9756610x5 | PartNumber: DT9756610x5 | Ean: 0791180061317 | UPC: 791180061317
【Specification】Both Double Ended Diameter Are 6Mm.Total Length 80Mm, Diamond Height 10Mm, Workable Depth 20Mm. Hex Shank, Shank Diameter 8.35Mm. Grit: #45/50.
【Vacuum Brazed Diamond Technology】High-Density Diamonds Are Brazed More Firmly To The Matrix And Provide Longer Service Life. #45/50 Diamond Is Sharp To Drill Holes In The Ceramic And Porcelain Tiles..
【Application】Used On Hand Drill, Bench Drill, Etc. Recommended Rpm: 2000-5000Rpm. Suitable For All Tiles, Marble, Artificial Stone, Granite, Stoneware And Quartz..
【Easy To Use】There Is Wax Inside The Drill Bit. No Need For Additional Water Cooling And Increases Drilling Speed..
Features
- Lower cost Dual drill bit design, one drill for two purposes, providing ultra-high cost performance.
- Easy to use There is wax inside the drill bit. No need for additional water cooling and increases drilling speed.
- Specification Both Double Ended Diameter are 6mm.Total length 80mm, diamond height 10mm, workable depth 20mm. Hex Shank, shank diameter 8.35mm. Grit: #45/50
- Application Used on hand drill, bench drill, etc. Recommended RPM: 2000-5000RPM. Suitable for all tiles, marble, artificial stone, granite, stoneware and quartz.
- Vacuum Brazed Diamond Technology High-density diamonds are brazed more firmly to the matrix and provide longer service life. #45/50 diamond is sharp to drill holes in the ceramic and porcelain tiles.
- See more on Amazon...
Brand: DT-DIATOOL | Manufacturer: DT-DIATOOL
Dimensions: 0.43 x 2.24 x 3.19 inches
See On Amazon #10
SHDIATOOL Diamond Chamfer Milling Bits,Enlarging, Shaping, Bevelling Existing Holes of Porcelain Tile Ceramic Marble Diameter 1/4"- 1"
Asin: B0BM8XKW7M | Model: A867662558 | PartNumber: A867662558
3: Available In Two Diameters (1/4" To 1") Meet The Processing Needs Of Different Apertures, Don't Need To Change Size, One Item Can Finish Different Work, Convient And Cost-Effective.
5: The Recommended Speed Is 6000Rpm, And The Maximum Speed Is 11000Rpm..
4: Machine : Angle Grinder, 5/8"-11 Thread, Is More Popular In North America Market.If You Fit Them On Drill Or Other Machine, You Need An Adapter, Such As Sds, Hex, Round Plus Shank....
2: High-Quality Diamond Grains #50/60 Ensure Sharpness Of Milling And Excellent Finish.
Features
- 1: Multi-function, For enlarging, shaping, edging, trimming etc. in existing holes Ceramic Tile, Porcelain Tile Marble, Granite and other materials
- 2: High-quality Diamond Grains #50/60 ensure sharpness of milling and excellent finish
- 3: Available in Two Diameters (1/4 to 1) meet the processing needs of different apertures, don't need to change size, one item can finish different work, convient and cost-effective
- 4: Machine : angle grinder, 5/8-11 thread, is more popular in North America market.If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank...
- 5: The recommended speed is 6000rpm, and the maximum speed is 11000rpm.
- See more on Amazon...
Brand: SHDIATOOL | Manufacturer: SHANGHAI DIATOOL CO., LTD.
See On Amazon
Looking For Something Else?
Search