uxcell Shunt Resistor 100A 75mV for DC Current Ammeter Analog Panel Meter External FL-19 Shunt Divider
Asin: B07MKMSBFL | Model: a18110700ux0121 | PartNumber: a18110700ux0121
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 100A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.10 x 2.95 x 1.57 Inches
See On Amazon Similar To uxcell Shunt Resistor 100A 75mV
#1
uxcell 2 Pcs Aluminum Case Resistor 100W 100 Ohm Wirewound Green for LED Replacement Converter 100W 100RJ
Asin: B07FS24W9P | Model: a18052500ux0086 | PartNumber: a18052500ux0086
This 100W Resistor Formed With Qualified Copper, Nickel, And Aluminum. With The Compact Structure And Heat Dissipation Design, A Capability Of Overload Has Been Built..
Reliable. Problems Like The Flush Led Would Have A Perfect Solution, Or You Can Use It In Any Ac Dc Circuits, Converter, Inverter, Motor Speed Control, Drivers, Etc..
Board Length 2.32 Inches(59Mm) And Two Rods With 2Mm Hole For A Soldering Connection. Dia. 3.2Mm Antisymmetric Anchoring Hole For Holding, Which Will Fit #2 Screws(Or M2.3 Nuts).
Aluminum Housed. An Insulated Cover On The Wounded Wires Would Block Out The Heat, Which Promises The High Performance Of A Resistor. Hence, The Cooling Job Was Achieved By Aluminum Case..
Features
- 100 Wattage and 100 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.33 x 2.36 Inches
See On Amazon #2
uxcell Shunt Resistor 20A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Resistance Divider
Asin: B07KNRBWYT | Model: a18101300ux0249 | PartNumber: a18101300ux0249
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 20A Rated (Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 50W 75 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 1pcs
Asin: B07FPKL5VZ | Model: a18041900ux0216 | PartNumber: a18041900ux0216
This 50W Resistor Formed With Qualified Copper, Nickel, And Aluminum. With The Compact Structure And Heat Dissipation Design, A Capability Of Overload Has Been Built..
Reliable. Problems Like The Flush Led Would Have A Perfect Solution, Or You Can Use It In Any Ac Dc Circuits, Converter, Inverter, Motor Speed Control, Drivers, Etc..
Board Length 1.96 Inches(49.8Mm) With Two 3.5Mm Mounting Hole, And 2 Terminals For A Connection..
Aluminum Housed. An Insulated Cover On The Wounded Wires Would Suppress The Heat, Which Promises The High Performance Of A Resistor. Hence, The Cooling Job Was Achieved By Aluminum Case..
Features
- 50 Watt and 75 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 50W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 1.96 inches(49.8mm) with two 3.5mm mounting hole, and 2 terminals for a connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 Inches
See On Amazon #4
uxcell 30Pcs 75 Ohm Resistor, 5W 5% Tolerance Metal Oxide Film Resistors, Lead, Flame Proof for DIY Electronic Projects and Experiments
Asin: B07RS4RZ6R | Model: a19041800ux0066 | PartNumber: a19041800ux0066
Four Bands Standard Eia Color Code.
Noted: Different Resistance On This Listing, Please Check What You Need Correctly Before Purchasing..
Typical Axis-Lead With Low Noise And High Performance.
5 Watt Metal Film Resistor With High Accuracy Of +/-5% (J).
Features
- 75 Ohm, +/-5% Tolerance, 30 pieces in total
- 5 watt metal film resistor with high accuracy of +/-5% (J)
- Four bands standard EIA color code
- Typical axis-lead with low noise and high performance
- Noted: Different Resistance on this listing, please check what you need correctly before purchasing.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell Shunt Resistor 15A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Divider
Asin: B07MH1KMCL | Model: 4350401548 | PartNumber: 4350401548
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 15A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.65 x 5.51 x 1.77 Inches | Weight: 0.13 pounds
See On Amazon #6
uxcell Shunt Resistor 500A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Divider
Asin: B07M9TW9XK
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 500A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.61 x 5.63 x 2.17 Inches
See On Amazon #7
uxcell a15070300ux0283 5A 75mV DC Current Measuring Shunt Resistor for Ammeter
Asin: B016EBRVGY | Model: a15070300ux0283 | PartNumber: a15070300ux0283 | Ean: 0712662202981 | UPC: 712662202981
Package Content: 1 X Dc Shunt; Main Color: Golden Tone.
Mount Hole Dia: 6.5Mm / 0.25".
Total Size: 12 X 2.5 X 1.6Cm / 4.7" X 1" X 0.63"(L X W X H).
Material: Metal, Plastic; Net Weight: 52G.
Features
- Product Name: DC Shunt; Country of Manufacture: CHINA
- Material: Metal, Plastic; Net Weight: 52g
- Package Content: 1 x DC Shunt; Main Color: Golden Tone
- Total Size: 12 x 2.5 x 1.6cm / 4.7 x 1 x 0.63(L x W x H)
- Mount Hole Dia: 6.5mm / 0.25
- See more on Amazon...
First Available: 08/09/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.63 x 4.69 x 0.98 Inches | Weight: 0.02 pounds
See On Amazon #8
uxcell Shunt Resistor 10A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Divider
Asin: B07MR4M6VG
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 10A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.69 x 5.51 x 1.77 Inches
See On Amazon #9
uxcell Shunt Resistor 200A 75mV for DC Current Ammeter Analog Panel Meter FL-19 Divider
Asin: B07M63P9SW | Model: a18110700ux0123 | PartNumber: a18110700ux0123
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 200A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.10 x 2.95 x 1.57 Inches
See On Amazon #10
uxcell Analog Current Panel Meter DC 0-50A 85C1 with 75mV Shunt for Circuit Testing Ampere Tester Gauge, 1 Set
Asin: B093T7ZG6J
[Size] - Meter Panel Size(Approx) : 2.52X2.2 Inch / 64X56(Lxw); Mount Size : 1.57X1.34 Inch / 40X34mm(Lxw).
[Appalication] - Needle Ampere Panel Meter Is Great For Replacing Broken Meter, Monitoring Circuits, Measuring Current, Or Other Voltage Measurement Devices.
[Shunt Features] - Voltage Drop: 75Mv; Shunt Overall Size: 4.72X0.98X0.71 Inch / 120X25x18mm(Lxwxh); Shunt Accuracy: 0.5.
[Material] - Transparent Plastic Shell Is Convenient For You To Read Scale Quickly.
Features
- [Main Parameter] - Model: 85C1; Measurement Range: 0-50A, Accuracy of Class: 2.5
- [Material] - Transparent plastic shell is convenient for you to read scale quickly
- [Size] - Meter Panel Size(Approx) : 2.52x2.2 Inch / 64x56(LxW); Mount Size : 1.57x1.34 Inch / 40x34mm(LxW)
- [Shunt Features] - Voltage Drop: 75mV; Shunt Overall Size: 4.72x0.98x0.71 Inch / 120x25x18mm(LxWxH); Shunt Accuracy: 0.5
- [Appalication] - Needle ampere panel meter is great for replacing broken meter, monitoring circuits, measuring current, or other voltage measurement devices
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Shunt Resistor 400A 75mV for DC Current Ammeter Analog Panel Meter External FL-19 Shunt Divider
Asin: B07MNVZN7Z | Model: a18110700ux0128 | PartNumber: a18110700ux0128
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 400A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.26 x 3.35 x 1.77 Inches
See On Amazon #12
uxcell Shunt Resistor 30A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Resistance Divider
Asin: B07KNNZQ54 | Model: a18101300ux0251 | PartNumber: a18101300ux0251
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 30A Rated (Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.12 x 1.57 Inches | Weight: 0.12 pounds
See On Amazon #13
uxcell Shunt Resistor 250A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Divider
Asin: B07MH1KKV7
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 250A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.61 x 5.24 x 1.46 Inches
See On Amazon #14
uxcell Analog Current Panel Meter DC 0-30A 85C1 with 75mV Shunt for Circuit Testing Ampere Tester Gauge, 1 Set
Asin: B093T7LNX3 | Model: a20102300ux0110 | PartNumber: a20102300ux0110
[Size] - Meter Panel Size(Approx) : 2.48X2.17X1.89 Inch / 63X55x48mm(Lxwxh); Mount Size : 1.57X1.38 Inch / 40X35mm(Lxw).
[Appalication] - Needle Ampere Panel Meter Is Great For Replacing Broken Meter, Monitoring Circuits, Measuring Current, Or Other Voltage Measurement Devices.
[Shunt Features] - Voltage Drop: 75Mv; Shunt Overall Size: 4.72X0.98X0.71 Inch / 120X25x18mm(Lxwxh); Shunt Accuracy: 0.5.
[Material] - Transparent Plastic Shell Is Convenient For You To Read Scale Quickly.
Features
- [Main Parameter] - Model: 85C1; Measurement Range: 0-30A, Accuracy of Class: 2.5
- [Material] - Transparent plastic shell is convenient for you to read scale quickly
- [Size] - Meter Panel Size(Approx) : 2.48x2.17x1.89 Inch / 63x55x48mm(LxWxH); Mount Size : 1.57x1.38 Inch / 40x35mm(LxW)
- [Shunt Features] - Voltage Drop: 75mV; Shunt Overall Size: 4.72x0.98x0.71 Inch / 120x25x18mm(LxWxH); Shunt Accuracy: 0.5
- [Appalication] - Needle ampere panel meter is great for replacing broken meter, monitoring circuits, measuring current, or other voltage measurement devices
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
uxcell Analog Current Panel Meter DC 0-20A 91C4 with 75mV Shunt for Circuit Testing Ampere Tester Gauge, 1 Set
Asin: B093T95BPY | Model: a20102300ux0113 | PartNumber: a20102300ux0113
[Size] - Meter Panel Size(Approx) : 1.7X1.7 Inch / 45 X 45Mm(Lxw); Mount Size : 1.5X1.1 Inch / 38X27mm(Lxw).
[Appalication] - Needle Ampere Panel Meter Is Great For Replacing Broken Meter, Monitoring Circuits, Measuring Current, Or Other Voltage Measurement Devices.
[Shunt Features] - Voltage Drop: 75Mv; Shunt Overall Size: 4.72X0.98X0.71 Inch / 120X25x18mm(Lxwxh); Shunt Accuracy: 0.5.
[Material] - Transparent Plastic Shell Is Convenient For You To Read Scale Quickly.
Features
- [Main Parameter] - Model: 91C4; Measurement Range: 0-20A, Accuracy of Class: 5.0
- [Material] - Transparent plastic shell is convenient for you to read scale quickly
- [Size] - Meter Panel Size(Approx) : 1.7x1.7 Inch / 45 x 45mm(LxW); Mount Size : 1.5x1.1 Inch / 38x27mm(LxW)
- [Shunt Features] - Voltage Drop: 75mV; Shunt Overall Size: 4.72x0.98x0.71 Inch / 120x25x18mm(LxWxH); Shunt Accuracy: 0.5
- [Appalication] - Needle ampere panel meter is great for replacing broken meter, monitoring circuits, measuring current, or other voltage measurement devices
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell Shunt Resistor 750A 75mV for DC Current Ammeter Analog Panel Meter External FL-19 Shunt Divider
Asin: B07MH1JZWR | Model: a18110700ux0126 | PartNumber: a18110700ux0126
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 750A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.30 x 4.61 x 2.36 Inches
See On Amazon #17
uxcell Shunt Resistor 300A 75mV for DC Current Ammeter Analog Panel Meter External FL-19 Shunt Divider
Asin: B07MR2DYYW | Model: a18110700ux0124 | PartNumber: a18110700ux0124
External Type. Two Holes On Both Sides For A Solid Placing, And Nuts For The Circuit Connection..
Connection. A Shunt Needs To Be Placed Parallel With The Ammeter(Moving Coil Galvanometer), To Bypass The Current. Normally, The Two Outside Terminals Were Connected With The Power Circuit Directly, And Both The Inside Terminals Placed In Series With The Meter..
0.5% Accuracy And 120% Overload Rated Current(For 2 Hours).
Made Of Copper With Anti-Rust Plated, Ensures The Performance Of Stability And Durability..
Features
- 75mV Voltage Drop and 300A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
- Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
- External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
- 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
- Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 3.35 x 1.77 Inches
See On Amazon #18
uxcell 100Pcs 75 Ohm Resistor, 2W 5% Tolerance Carbon Film Resistors, 4 Bands for DIY Electronic Projects and Experiments
Asin: B07GTQG24M | Model: a18062000ux0363 | PartNumber: a18062000ux0363
Four Bands Standard Eia Color Code.
Cf Resistor Would Be A Reliable Component For Electronic Projects And Testing Program.
Typical Axis-Lead With Low Noise And High Performance.
2 Watt Carbon Film Resistor With +/-5% Tolerance (J) For Most General Use.
Features
- Color Code: Purple, Green, Black, Gold Tone (75 ohm, 5%), 100 pieces in total
- 2 watt carbon film resistor with +/-5% tolerance (J) for most general use
- Four bands standard EIA color code
- Typical axis-lead with low noise and high performance
- CF resistor would be a reliable component for electronic projects and testing program
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 Inches | Weight: 0.00 pounds
See On Amazon #19
uxcell Aluminum Case Resistor 100W 75 Ohm Wirewound Gold for LED Replacement Converter 100W 75RJ
Asin: B07FS34Y4L | Model: a18052500ux0026 | PartNumber: a18052500ux0026
This 100W Resistor Formed With Qualified Copper, Nickel, And Aluminum. With The Compact Structure And Heat Dissipation Design, A Capability Of Overload Has Been Built..
Reliable. Problems Like The Flush Led Would Have A Perfect Solution, Or You Can Use It In Any Ac Dc Circuits, Converter, Inverter, Motor Speed Control, Drivers, Etc..
Board Length 2.32 Inches(59Mm) And Two Rods With 2Mm Hole For A Soldering Connection. Dia. 3.2Mm Antisymmetric Anchoring Hole For Holding, Which Will Fit #2 Screws(Or M2.3 Nuts).
Aluminum Housed. An Insulated Cover On The Wounded Wires Would Block Out The Heat, Which Promises The High Performance Of A Resistor. Hence, The Cooling Job Was Achieved By Aluminum Case..
Features
- 100 Wattage and 75 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 100W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 2.32 inches(59mm) and two rods with 2mm hole for a soldering connection. Dia. 3.2mm antisymmetric anchoring hole for holding, which will fit #2 Screws(or M2.3 nuts)
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.33 x 2.36 Inches
See On Amazon
Looking For Something Else?
Search