2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano
Asin: B07MVTSGBB | Model: (DIY0050+ST1283+ST2865)*2 | PartNumber: (DIY0050+ST1283+ST2865)*2 | Ean: 0747356633178 | UPC: 747356633178
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🚩 Interface Type: Spi.
🚩 Ideal For Creating Long Range Wireless Networks That Can Exceed 2.4 Ghz 802.15.4 And Similar, It Is More Flexible Than Bluetooth Le, Does Not Require High Power Unlike Wifi And Offers Long Range..
🚩 Hpd13 Wireless Module: High-Performance, Highly Integrated Rf Transceiver Chip Sx1276, Long Communication Distance, High Anti-Jamming, Low Current Consumption, Higher Reception Sensitivity Performance.
🚩 Lora32u4 Ii Is A Light And Low Consumption Board Based On The Atmega32u4 And Hpd13 915Mhz Lora Module And An Usb Battery Charging Circuit.
Features
- Document link https(:)//tinyurl(dot)com/lora32u4ii
- LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and HPD13 915MHz LoRA module and an USB battery charging circuit
- Interface Type: SPI
- HPD13 wireless module: high-performance, highly integrated RF transceiver chip SX1276, Long communication distance, high anti-jamming, low current consumption, higher reception sensitivity performance
- Ideal for creating long range wireless networks that can exceed 2.4 GHz 802.15.4 and similar, it is more flexible than Bluetooth LE, does not require high power unlike WiFi and offers long range.
- See more on Amazon...
Brand: Stemedu | Manufacturer: Stemedu/Shenzhen Ai-Thinker Technology Co.,Ltd
See On Amazon Similar To 2 Sets LoRa32u4ii Lora Development
#1
DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Asin: B08629526P | Model: FZ2886-AX2K | PartNumber: FZ2886-AX2K
The Mcu Is Different, So The Definitions Of V2 And V3 Gpio Pins Are Different.
What You Will Get: 2 X Esp32 Lora V3 Development Board + 2 X 915Mhz Antenna + 2 X Jst 1.25Mm-2P Connector Cable + 2.54 Pin (No Welding) + 2 X Protective Case For Lora Board.
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
It Is The Best Option For Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Upgraded V3 Version Has Better Impedance Matching Of Rf Circuits.
Mcu: Esp32-S3fn8 (V2 Is Esp32-D0wdq6), Lora Chip: Sx1262(V2 Is Sx1276/8), Usb Socket: Type-C(V2 Is Micro-Usb).
Features
- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- Upgraded V3 version has better impedance matching of RF circuits
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Dimensions: 0.38 x 1.97 x 1.00 Inches
See On Amazon #2
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with LoRa 32 V2
Asin: B086ZFCV7F | Ean: 0747356634250 | UPC: 747356634250
You Will Receive, 1Pcs 915Mhz Esp32 Lora V3, 1Pcs 915Mhz Lora Antenna,And 1Pcs 2Pin 1.25Mm Connector..
Lora 32 V2 Use Esp32-D0wdq6 Mcu, But The V3 Is Esp32-S3fn8, So Pinout Is Different. The Apis Used With The Libraries Are Different, So Programs Written For V2 Do Not Compile V3..
Support Type-A To Type-C Cable Only, Not Type-C To Type-C Cable..
Lora V3 Board Are An Improvement Over The V2 Version, But They Are Not A Replacement..
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
Features
- This LoRa board comes unassembled, soldering is required, not equipped with lithium battery.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- You will receive, 1pcs 915MHz esp32 lora V3, 1pcs 915mhz lora antenna,and 1pcs 2pin 1.25mm connector.
- LoRa V3 board are an improvement over the V2 version, but they are not a replacement.
- LoRa 32 V2 use ESP32-D0WDQ6 MCU, but the V3 is ESP32-S3FN8, so pinout is different. The APIs used with the libraries are different, so programs written for V2 do not compile V3.
- Support type-A to type-C cable only, not type-C to type-C cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.05 pounds
See On Amazon #3
915MHz ESP32 LoRa OLED Development Board V3 SX1262 Type-C + LoRa Antenna for Arduino LoraWan IOT Internet of Thing (Pack of 2), not Compatible with LoRa V2
Asin: B07HJ49VN8 | Ean: 0747356629140 | UPC: 747356629140
0.96 Oled Is Mounted On Esp32 Lora Board Via 4 Screws, So It Is Removable But Pls Be Careful To Do It To Avoid Damage..
The 915 Lora Antenna Is A Little Big. If You Want To Use The Lora V3 Board With Case, You Need To Buy Another Small Lora Antenna.
You Will Receive, 2Pcs Lora Oled Board 915Mhz New Version V3, And 2Pcs 915Mhz Lora Antenna..
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
Features
- The esp32 lora 915mhz comes unassembled, soldering is required, not equipped with lithium battery.
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- 0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage.
- You will receive, 2pcs lora oled board 915mhz new version V3, and 2pcs 915mhz lora antenna.
- The 915 lora antenna is a little big. If you want to use the lora v3 board with case, you need to buy another small lora antenna
- See more on Amazon...
Brand: NEXTION | Manufacturer: DIYmalls
Dimensions: 0.80 x 1.90 x 1.20 inches | Weight: 0.10 Pounds
See On Amazon #4
Geekstory 915MHZ ESP32 LoRa Development Board V3 SX1262 ESP32 LoRa V3 with OLED Display + LoRa 32 V3 case + LoRa Antenna for Arduino LoraWan IOT Internet, not Compatible with LoRa V2 (Pack of 2)
Asin: B0CYSKXTXF
-Type-C Usb Interface With Full Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding And Other Protection Measures. Integrated Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb-To-Serial Interface Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follows: Click "Geekstory" (You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8 Dual-Core Processor, Frequency Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 2pcs 863-928MHz esp32 lora V3 + 2pcs 915mhz lora antenna + 2pcs 2pin 1.25mm cable. (This antenna can be used with the lora case).
- -Microprocessor: ESP32-S3FN8 dual-core processor, frequency up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with full voltage regulator, ESD protection, short circuit protection, RF shielding and other protection measures. Integrated SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB-to-serial interface chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follows: Click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #5
HiLetgo ESP32 SX1262 LoRa Kit 863-928MHz Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless Communication Development Board with 0.49" OLED Display 64M Bits Flash Works with Arduino IDE Type C
Asin: B07S5XLP6Q | Model: 3-01-1515 | PartNumber: 3-01-1515
Microprocessor: Esp32 (Dual-Core 32-Bit Mcu + Ulp Core), With Lora Node Chip Sx1262;.
Integrated Wifi, Lora, Bluetooth Three Network Connections, Onboard Wi-Fi, Bluetooth Dedicated 2.4Ghz Metal 3D Antenna, Reserved Ipex (U.Fl) Interface For Lora Use;.
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System (Charge And Discharge Management, Overcharge Protection, Battery Power Detection, Usb / Battery Power Automatic Switching);.
Esp32 Sx1262 Lora Kit With Type - C Interface.
Features
- ESP32 SX1262 LoRa Kit 863-928MHz Bluetooth 4.2+WiFi+LoRa LoRaWAN Wireless
- ESP32 SX1262 LoRa Kit with Type - C Interface
- Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1262;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa use;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.31 x 2.36 x 0.91 Inches
See On Amazon #6
Comimark 2Pcs LoRa SX1278 Long Range RF Wireless Power Mental Module SX1276 5Km for Arduino
Asin: B07W6ZPH7D | Model: LY369 | PartNumber: LY369 | Ean: 0657835676841 | UPC: 657835676841
Ism Multi-Band, No Need To Apply For Frequency Free Use..
If You Are Not Satisfied With Your Purchase For Any Reason, Please Feel Free To Contact Us At The Buyer Center Or Support Email, 24/7 Quick Reply..
Package Included: 2 X Transceiver Module.
Super Anti-Jamming (Channel Rejection Ratio: 56Db)..
Features
- Using FSK / GFKS technology and LoRa (remote) spread spectrum technology.
- Super anti-jamming (channel rejection ratio: 56db).
- ISM multi-band, no need to apply for frequency free use.
- Package included: 2 x Transceiver Module
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #7
2 Sets Esp32 Lora V3 915mhz WiFi+BLE Development Board Kit 0.96inch OLED Display SX1262 + Lora V3 case +824-960MHz Antenna for Arduino NodeMCU IoT
Asin: B0CW9SP6LR
3. Enhanced User Experience: Features A 0.96-Inch Oled Display For Easy Debugging And Real-Time Information Display, Enhancing User Interaction And Convenience.
5. Simplified Development: Compatible With The Arduino Development Environment And Equipped With A Cp2102 Usb To Serial Port Chip For Easy Program Downloading And Debugging, Streamlining The Development Process For Users.
4. Reliable Protection: Incorporates Comprehensive Protection Measures Including Voltage Regulation, Esd Protection, Short Circuit Protection, And Rf Shielding, Ensuring Device Safety And Longevity.
2. Versatile Connectivity: Seamlessly Integrates Wifi, Lora, And Bluetooth Connections, Offering Extensive Networking Options For Diverse Applications.
Features
- 1. Powerful Processing: Equipped with an ESP32-S3FN8 microprocessor featuring a dual-core Xtensa LX7 architecture running at frequencies up to 240 MHz, delivering robust computational capabilities
- 2. Versatile Connectivity: Seamlessly integrates WiFi, LoRa, and Bluetooth connections, offering extensive networking options for diverse applications
- 3. Enhanced User Experience: Features a 0.96-inch OLED display for easy debugging and real-time information display, enhancing user interaction and convenience
- 4. Reliable Protection: Incorporates comprehensive protection measures including voltage regulation, ESD protection, short circuit protection, and RF shielding, ensuring device safety and longevity
- 5. Simplified Development: Compatible with the Arduino development environment and equipped with a CP2102 USB to serial port chip for easy program downloading and debugging, streamlining the development process for users
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 0.40 x 1.98 x 1.00 inches
Warranty: NO
See On Amazon #8
Gowoops SX1276 LoRa Radio Wireless 862-930MHz 915MHz UART Serial Module Transmitter Receiver + 915Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer
Asin: B07G7RZLTW | Model: 8541545860 | PartNumber: 8541545860 | Ean: 0705586406108 | UPC: 705586406108
✔ Fec (Forward Error Correction) -- High Coding Efficiency & Good Correction Performance.
✔ Fixed Transmission -- Each Module Can Connect With Other Module In Different Addresses And Channels To Achieve Application Like Networking, Repeating, Etc..
✔ Transparent Transmission (Point To Point) -- Data Sending Is Via Transparent Transmission, The Module Comes With Address.
✔ Wor (Low Power Consumption) -- Work On Radio, Applicable For Battery Powered Applications.
Features
- LoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK
- WOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications
- FEC (Forward Error Correction) -- High coding efficiency & good correction performance
- Transparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address
- Fixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.
- See more on Amazon...
Brand: Gowoops | Manufacturer: Gowoops
Dimensions: 6.59 x 2.60 x 0.71 Inches
See On Amazon #9
DIYmalls 915 LoRa GPS Module ASR6502 HTCC-AB02S Development Board SX1262 0.96 OLED + 915MHz LoRa Antenna IPEX + 1.25mm 2P Connector for Arduino LoRaWAN Gateway (Pack of 2)
Asin: B09SV5F1CM
-You Need To Use One Asr6502 Lora Module 915 Mhz To Send, And The Other To Receive..
-You Will Receive 2Pcs Lora 915Mhz Board, 2Pcs Lora Antenna 915Mhz, And 2Pcs 1.25Mm 2Pin Cable..
-0.96 Oled Is Mounted On 915 Lora Board Via 4 Screws, So It Is Removable But Pls Be Careful To Avoid Damage..
-915 Mhz Htcc-Ab02s Lora Board Comes Not Soldered, So You Need To Assemble It Manually..
Features
- -915MHz lora gps is fully compatible with arduino, windows, linux, and integrated lorawan protocol for secondary development.
- -915 mhz htcc-ab02s lora board comes NOT soldered, so you need to assemble it manually.
- -You need to use one asr6502 lora module 915 mhz to send, and the other to receive.
- -0.96 oled is mounted on 915 lora board via 4 screws, so it is removable but pls be careful to avoid damage.
- -You will receive 2pcs lora 915mhz board, 2pcs lora antenna 915mhz, and 2pcs 1.25mm 2pin cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #10
SX1262 LoRa HAT Covers 915MHz Frequency Band with Spread Spectrum Modulation Supports Raspberry Pi 1 2 3 4 Series Boards with UART Interface for STM32 @XYGStudy
Asin: B07VS47RQZ | Ean: 0710667083895, 0719209006996 | UPC: 719209006996, 710667083895
By Utilizing The New Generation Lora Spread Spectrum Modulation Technology, The Communication Distance Of The Module Is As Long As 5Km, Also Supports Auto Repeating To Transmit Longer. Other Features Include Wake On Radio, Wireless Config, Carrier Sensing, Communication Key, And So On..
Standard Raspberry Pi 40Pin Gpio Extension Header, Supports Raspberry Pi Series Boards. Onboard Cp2102 Usb To Uart Converter, For Serial Debugging. Brings The Uart Control Interface, For Connecting Host Boards Like Arduino/Stm32.
Comparing With Normal Lora Modules, The Sx1262 Lora Hat Achieves Longer Communication Distance, Higher Rate, Lower Consumption, Better Safety And Anti-Interference. It Is Suitable For Various Applications Such As Industrial Control, Smart Home, Data Collection, Etc..
This Is A Raspberry Pi Lora Hat Based On Sx1262, Covers 915Mhz Frequency Band. It Allows Data Transmission Up To 5Km Through Serial Port..
Features
- SX1262 915M LoRa HAT
- This is a Raspberry Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.
- By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
- Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Onboard CP2102 USB TO UART converter, for serial debugging. Brings the UART control interface, for connecting host boards like Arduino/STM32
- See more on Amazon...
Brand: XYGStudy | Manufacturer: XYGStudy
See On Amazon #11
DSD TECH Lora Module SH-B50L RS485/232 to Lora Adapter Lorawan Wireless Transceiver
Asin: B0C9QDHZ25 | Model: SH-B50L | PartNumber: SH-B50L | Ean: 0794251082044 | UPC: 794251082044
Industrial Grade: Built-In Semtech Llcc68 Lora Chip . Support 5V-24V Dc Input. Dsd Tech Also Offers Free Configuration Software..
Warranty:Dsd Tech Provide A 1 Year Warranty And Lifetime Technical Support For This Sh-B50l Rs485/232 To Lora Adapter.If You Have Any Questions, Please Feel Free To Contact Us. We Will Respond Within 24 Hours..
Compatibility:Sh-L1a And Sh-B50l Are Two Lora Communication Products Launched By Dsd Tech. They Can Communicate With Each Other, But Not With Third-Party Lora Products For The Time Being..
Lora To Rs485/Rs232: With This Lora Adapter, You Can Use Lora Communication To Transfer Rs232 Or Rs485 Interface Data From Your Device.Receiving Sensitivity Is -129Dbm, Working In 850. 125~930.125Mhz Band, Lora Spread Spectrum Technology Is Suitable For Long Distance And Complex Environment Communication..
Features
- DSD TECH: DSD TECH focuses on the development of communication connection devices such as USB/Serial/Wireless. We have served more than 100,000 customers in Europe, North America and Japan.
- Lora to RS485/RS232: With this Lora adapter, you can use Lora communication to transfer RS232 or RS485 interface data from your device.Receiving sensitivity is -129dbm, working in 850. 125~930.125MHz band, LoRa spread spectrum technology is suitable for long distance and complex environment communication.
- Industrial Grade: Built-in Semtech LLCC68 Lora chip . Support 5V-24V DC input. DSD TECH also offers free configuration software.
- Compatibility:SH-L1A and SH-B50L are two Lora communication products launched by DSD TECH. They can communicate with each other, but not with third-party Lora products for the time being.
- Warranty:DSD TECH provide a 1 year warranty and lifetime technical support for this SH-B50L RS485/232 to Lora Adapter.if you have any questions, please feel free to contact us. We will respond within 24 hours.
- See more on Amazon...
Brand: DSD TECH | Manufacturer: DSD TECH
See On Amazon #12
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 + LoRa Antenna IPX 2dBi for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa V2
Asin: B09VDJJTDB
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
If You Have Any Problem, Please Do As Follow: Click " Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
To Make Lora Esp32 Board Work Better, That Would Be Great If You Power Via On-Board Type-C Port 5V.
You Will Receive 2Pcs 915Mhz Esp32 Lora Oled Board V3, 2Pcs 915Mhz Lora Antenna,And 2Pcs 1.25Mm Cable..
Features
- LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- You will receive 2pcs 915MHz esp32 lora oled board V3, 2pcs 915mhz lora antenna,and 2pcs 1.25mm cable.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- To make lora esp32 board work better, that would be great if you power via on-board type-C port 5V
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Warranty: 30 days
See On Amazon #13
MakerFocus LoRa SX1262 Module 863 928 MHZ LoRaWAN IoT Development Board ASR6502 MCU 128KB Flash Ultra Low Power Consumption Solar Energy Powered Design with Antenna for Arduino and Intelligent Scene
Asin: B07ZHCMFW4 | Model: HBIHBS-22 | PartNumber: HBIHBS-22
Perfect Circuit Design: Based On Asr6502, Integrated Cp2102 Usb To Serial Port Chip, Convenient For Program Downloading, Debugging Information Printing.
Excellent Feature: Perfectly Compatible With Arduino; Good Impedance Matching And Long Communication Distance. Wide Range Of Application Scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting.
Strongest Protection: Type C Interface With Complete Esd Protection,Short Circuit Protection, Rf Shielding,And Other Protection Measures.
Ultra Low Power Design: 3.5Ua In Deep Sleep. Onboard Solar Energy Management System, Can Directly Connect With A 5.5~7V Solar Panel; Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System (Charge And Discharge Management,Overcharge Protection,Battery Power Detection,Usb/Battery Power Automatic Switching).
Features
- LoRa Dev Board: Friendly designed for developers, easy to verify communication solutions
- Ultra Low Power Design: 3.5uA in deep sleep. Onboard solar energy management system, can directly connect with a 5.5~7V solar panel; Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management,overcharge protection,battery power detection,USB/battery power automatic switching)
- Perfect Circuit Design: Based on ASR6502, integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- Strongest Protection: Type C interface with complete ESD protection,short circuit protection, RF shielding,and other protection measures
- Excellent Feature: Perfectly compatible with Arduino; good impedance matching and long communication distance. Wide range of application scenarios - Smart Agriculture, Scenic Area Management, Industry 4.0, Urban Lighting
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.30 x 1.60 x 0.90 Inches
Warranty: No Warranty
See On Amazon #14
Geekstory 915MHZ ESP32 LoRa Development Board V3 SX1262 ESP32 LoRa V3 with OLED Display Type-C + LoRa 32 V3 Housing for Arduino LoraWan IOT Internet, not Compatible with LoRa V2
Asin: B0CYSSZMSR
-Type-C Usb Interface With Full Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding And Other Protection Measures. Integrated Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb-To-Serial Interface Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follows: Click "Geekstory" (You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8 Dual-Core Processor With A Frequency Of Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 1pcs 863-928MHz esp32 lora V3 + 1pcs 915mhz lora antenna + 1pcs 2pin 1.25mm cable. (This antenna can be used with the Lora case. If you need a Lora V3 case, you can buy it from "Geekstory").
- -Microprocessor: ESP32-S3FN8 dual-core processor with a frequency of up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with full voltage regulator, ESD protection, short circuit protection, RF shielding and other protection measures. Integrated SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB-to-serial interface chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follows: Click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #15
Geekstory ESP32 LoRa Development Board V3 SX1262, ESP32 LoRa V3 Development Board with OLED Display Type-C+868MHZ LoRa Antenna for Arduino LoraWan IOT Internet,not Compatible with LoRa V2(2-Pack)
Asin: B0CYSHRTPX
-Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures. Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb To Serial Port Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follow: Click "Geekstory"(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8dual-Core Processor, Frequency Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 2pcs 863-928MHz esp32 lora V3 + 2pcs 868mhz lora antenna + 2pcs 2pin 1.25mm cable.
- -Microprocessor: ESP32-S3FN8dual-core processor, frequency up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures. Onboard SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB to serial port chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follow: click Geekstory(you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #16
AITRIP 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board SX1262 Type-C Lora Kit 0.96inch OLED Display ESP32-S3 Dual-core with Protective Case Compatible with Arduino NodeMCU
Asin: B0CWNCKXSL | Ean: 0687117740250 | UPC: 687117740250
Mcu: Esp32-S3fn8 (V2 Is Esp32-D0wdq6), Lora Chip: Sx1262(V2 Is Sx1276/8), Usb Socket: Type-C(V2 Is Micro-Usb).
If You Need To Download Information. Please Contact Us.
The New Version V3 Features The Same Pin Sequence As The V2 Version, And Retains Wi-Fi, Ble, Lora, Oled Display, And Other Features. It Is The Best Choice For Developers Of Smart Cities, Farms, Homes, Industrial Controls, House Security, Wireless Meter Reading And The Internet Of Things. With Good Rf Circuit Design And Low Power Consumption Design..
Features
- LoRa Chip: SX1262 USB Socket: Type-C
- The new version V3 features the same pin sequence as the V2 version, and retains Wi-Fi, BLE, LoRa, OLED display, and other features. It is the best choice for developers of smart cities, farms, homes, industrial controls, house security, wireless meter reading and the Internet of Things. With good RF circuit design and low power consumption design.
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- If you need to download information. Please contact us
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #17
DIYmall LoRa32u4 II Lora Development Board Module 915MHZ LiPo SX1276 HPD13 with Antenna for Arduino
Asin: B075MZ11DS | Model: DIY0051N+FZ2862 | PartNumber: DIY0051N+FZ2862
Built In 100Ma Lipoly Charger With Charging Status Indicator Led, Interface Is 2.0Mm Male.
What You Will Get Is : 1 X Lora32u4 Ii Lora Module, 1 X Ipex 1.13 Uf.L Antenna, 1 X Jst-Ph2.0Mm-2P Plug Cable.
915Mhz Gsm Ipx Ipex 1.13 Uf.L Antenna Built-In 2Dbi, 8Cm,Standing Wave Ratio / S.W.R.≤2.0,Impedance: 50Ω,Max Input Power 50W.
3.3V Regulator With 500Ma Peak Current Output.
Features
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- 915MHz GSM IPX IPEX 1.13 UF.L Antenna Built-in 2DBi, 8cm,Standing wave ratio / S.W.R. 2.0,Impedance: 50 ,Max Input power 50W
- What you will get is : 1 X LoRa32u4 II Lora module, 1 X IPEX 1.13 UF.L Antenna, 1 X JST-PH2.0MM-2P plug cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #18
LoRa32u4 II Lora Development Board Module LiPo SX1276 HPD13 915MHZ with Antenna for Arduino DIYmall
Asin: B075TXGNGR | Model: DIY0051N+FZ2865 | PartNumber: DIY0051N+FZ2865
3.3V Regulator With 500Ma Peak Current Output.
What You Will Get : 1 X Lora32u4 Ii 915Mhz Board + 1 X Antenna + 1 X Jst-Ph2.0Mm-2P Cable.
Built In 100Ma Lipoly Charger With Charging Status Indicator Led, Interface Is 2.0Mm Male.
Atmega32u4 @ 8Mhz With 3.3V Logic/Power.
Features
- Document link https://github(DOT)com/BSFrance/BSFrance-avr
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- Built in 100mA lipoly charger with charging status indicator LED, interface is 2.0mm male
- What you will get : 1 X LORA32U4 II 915MHZ Board + 1 X Antenna + 1 X JST-PH2.0MM-2P Cable
- See more on Amazon...
Brand: DIYmall | Manufacturer: DIYmall
See On Amazon #19
4 Sets 915MHZ ESP32 Lora V3 + 2pcs Case
Asin: B0CDNWH3Z1
2Pcs Case.
4 Sets 915Mhz Esp32 Lora V3 With Antenna.
Brand: DIYmall
See On Amazon
Looking For Something Else?
Search