uxcell 10mm or 3/8" ID Brass Barb Splicer Fitting,T-Shaped 3 Ways,Barb Hose Fitting Air Gas Water Fuel,Barbed Tee Connector,5pcs
Asin: B07MX9RNXB | Model: a18113000ux0148 | PartNumber: a18113000ux0148
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.►【Advantage】- Barbed Fitting Creates A Tight Seal On Flexible And Semi-Rigid Hose.
►【Application】- Hose Barb Fitting Used To Connect Lines For Air, Water, Gas,Fuel, Oil And Inert Gases In A Quick And Simple Way.Use With Plastic Or Rubber Hose.
►【 Material】- Brass Brass Barb Splicer Fitting Made Of Brass, Brass Has Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability,Etc.
►【Brass Barb Fitting】- The Brass Barb Union Coupling For Connecting Three Hoses With The Same Diameter.
Features
- UNIVERSAL DESIGN - Barb Size: 10mm or 3/8" ; Barb Length: 0.63-inch ; Barbed barb hose fitting has three openings for connecting 3/8" ID hoses
- BRASS BARB FITTING - The brass Barb union coupling for connecting three hoses with the same diameter
- ADVANTAGE - Barbed fitting creates a tight seal on flexible and semi-rigid hose
- MATERIAL - Brass Brass Barb Splicer Fitting made of brass, Brass has corrosion resistance, ductility at high temperatures, and low magnetic permeability,etc
- APPLICATION - Hose Barb fitting used to connect lines for air, water, gas,fuel, oil and inert gases in a quick and simple way.use with plastic or rubber hose
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 1.97 x 1.97 inches
See On Amazon Similar To uxcell 10mm or 3 8
#1
uxcell Metric M8 x 1.25 Furniture Glide Leveling Feet Adjustable Leveler Floor Protector for Table Desk Cabinet Leg 8 Pack
Asin: B07GBW8DTW | Model: a18071600ux0226 | PartNumber: a18071600ux0226
Keep Balance - If The Floor Is Rough Or The Leg Of The Product Is Bad, You Can Install It At The Bottom Of Your Product To Stay Balanced. It Can Effectively Protect The Product During The Movement, Prevent Scratches And Reduce Sharp Noise..
Prevent Moisture - The Thick Plastic Bottom And Adjustable Thread Height Keep The Product Feet Away From The Moist Floor, Effectively Protecting The Feet And Floor To Keep It Tidy And Beautiful..
Easy Install - Made Of Plastic And Metal, It Is Durable And Convenient, Easy To Install And Better Stability For Furniture And Machine Feet. Choosing The Right One For Your Product Then Screw It In As You Desire..
Apply Scene - The Adjustable Leveling Foot Is For Office Or Household Furniture Even Industrial Machines With Threaded Sockets. Such As Mechanical Equipment, Fitness Equipment, Racks, Tv Stands, Table, Cabinets, Shelves, Beach Chairs, Desks, And So On..
Features
- Dimensions - Thread diameter M8 (approx. 7.8mm); Thread pitch: 1.25mm; Thread length: 10mm; Base size: 22 x 9 mm/0.87 inches x 0.35 inches (diameter * height); Packing list: 8 leveling feet (please Note that this product does not contain T Type embedded nuts. If you cannot confirm the thread specifications, please contact us.)
- APPLY SCENE - The adjustable leveling foot is for office or household furniture even industrial machines with threaded sockets. Such as mechanical equipment, fitness equipment, racks, TV stands, table, cabinets, shelves, beach chairs, desks, and so on.
- KEEP BALANCE - If the floor is rough or the leg of the product is bad, you can install it at the bottom of your product to stay balanced. It can effectively protect the product during the movement, prevent scratches and reduce sharp noise.
- EASY INSTALL - Made of plastic and metal, it is durable and convenient, easy to install and better stability for furniture and machine feet. Choosing the right one for your product then screw it in as you desire.
- PREVENT MOISTURE - The thick plastic bottom and adjustable thread height keep the product feet away from the moist floor, effectively protecting the feet and floor to keep it tidy and beautiful.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.31 x 0.87 x 0.39 inches
See On Amazon #2
uxcell Foam Tubing for Handle Grip Support, Pipe Insulation, 10mm(3/8") ID 20mm OD 1m Length Black
Asin: B09521BHQJ | Model: a21011400ux0116 | PartNumber: a21011400ux0116
Advantage - High Elasticity, Strong Tensile, Easy To Bend, And Aging Resistant.
Widely Application - It Is Used To Protect The Handle, Such As For Fitness Equipment, Utensil, Etc. Heat Preservation Insulated For Pipe, Increase The Softness, Anti-Skid And Wear Resistance, Heat Insulation. The Smaller Foam Tubing Is Suitable For Use With Tools, Pens And Other Items With Small Handles. The Larger Foam Tubing Is Suitable For Use With The Handle Of Fitness Equipment.
Non-Slip - Anti-Skid Foam Is Fixed On Tools Or Appliances And Is Not Easy To Slip.Please Note That When Inserting The Rod, It Could Be Easier To Insert To The Foam Tubing With Using Some Lubricant Or Water On The Rod Surface.
Rubber Material - The Tubing Is Made Of Rubber Material, Soft And Durable, Can Be Used Repeatedly. Working Temperature Is -40°C To 80°C(-40°F To 176°F).
Features
- Foam Tubing- 10mm inner dia, 20mm outer dia, 1m(3.3ft) total length. Suitable 9-10mm OD pipe
- Rubber Material - The tubing is made of Rubber material, soft and durable, can be used repeatedly. Working temperature is -40 C to 80 C(-40 F to 176 F)
- Advantage - High elasticity, strong tensile, easy to bend, and aging resistant
- Non-slip - Anti-skid foam is fixed on tools or appliances and is not easy to slip.Please note that when inserting the rod, it could be easier to insert to the foam tubing with using some lubricant or water on the rod surface
- Widely Application - It is used to protect the handle, such as for fitness equipment, utensil, etc. heat preservation insulated for pipe, increase the softness, anti-skid and wear resistance, heat insulation. The smaller foam tubing is suitable for use with tools, pens and other items with small handles. The larger foam tubing is suitable for use with the handle of fitness equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 39.30 x 0.60 Inches
See On Amazon #3
uxcell Metric Machine Tap M10 x 1.25mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSWJYN1 | Model: a18102400ux0296 | PartNumber: a18102400ux0296
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M10 x 1.25mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 Inches | Weight: 0.00 pounds
See On Amazon #4
uxcell Heat Shrink Tubing 3/8"(10mm) Dia 16mm Flat Width 10m 2:1 Heat Shrink Tube Wire Wrap Clear
Asin: B07FVSFBJ1 | Model: a18060900ux0192 | PartNumber: a18060900ux0192
Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius Maximum..
Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & More..
Heat Shrink Tubing Is Good Useful, Of The Specification Of Good Electrical Insulation, Corrosion Resistance And High Temperature Resistance..
Operating Temperature: -55 To 125 Degree Celsius.
Features
- Diameter(Before Shrinking): 10mm / 0.39"; Flat Width: 16mm / 0.63"; Length(approx.): 10M / 33ft; Shrink rate: 2:1.
- Operating Temperature: -55 to 125 Degree Celsius
- Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.
- Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance.
- Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 7.87 x 4.72 inches
See On Amazon #5
Hexagon Socket Cap Head Self Tapping Screws M2x10mm 100 Pcs
Asin: B00YBMROKC | Model: TRTAXCEEGF2589 | PartNumber: TRTAXCEEGF2589
Self-Tapping Screw: Made Of 304 Stainless Steel Material, Hard, Durable, And Reusable For A Long Service Time. It Will Fit Almost All Kinds Of Home Repair And Diy Projects, Which Can Help You Repair Or Remodel Them Efficiently..
Applications: For Joining Most Woods, Boards, Kitchen Worktops, Cabinets, Cupboards, Electronic Equipment, Machinery, Buildings, Fittings, Sports Equipment, And A Variety Of Other Diy Projects..
Features: The Thread Of The Metric Socket Head Cap Screw Is Clear And Firm, Smooth And Burr-Free, Easy To Insert, And Not Easy To Loosen. The Design Of The Inner Hex Head Also Makes It Easy To Install..
Thread Pitch: 0.8Mm; Hex Head Size: 3.5 X 2Mm/ 0.14" X 0.08"(D*T); Package Content: 100Pcs X Self Tapping Screws.
Features
- Material: 304 Stainless Steel; Color: Silver Tone; Screw Type: M2x10mm/M2 x 0.39"(D*L)
- Thread Pitch: 0.8mm; Hex Head Size: 3.5 x 2mm/ 0.14 x 0.08(D*T); Package Content: 100Pcs x Self Tapping Screws
- Self-Tapping Screw: Made of 304 stainless steel material, hard, durable, and reusable for a long service time. It will fit almost all kinds of Home Repair and DIY Projects, which can help you repair or remodel them efficiently.
- Features: The thread of the metric socket head cap screw is clear and firm, smooth and burr-free, easy to insert, and not easy to loosen. The design of the inner hex head also makes it easy to install.
- Applications: For joining most woods, boards, kitchen worktops, cabinets, cupboards, Electronic equipment, Machinery, Buildings, fittings, Sports equipment, and a variety of other DIY projects.
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
See On Amazon #6
uxcell 16pcs Chair Leg Tips Caps 10mm 3/8 Inch Rubber Furniture Table Feet Cover Floor Protector Reduce Noise Prevent Scratches Black
Asin: B07M82HVSV | Model: a18121500ux0011 | PartNumber: a18121500ux0011
Reduce Noise - This Leg Cap Can Greatly Reduce The Noise, You Could No More Worry About Suffering A Harsh Sound When Moving The Furniture. Anti-Slip Bottom Surface Will Be More Anti-Skid Than The Original Rubber Feet, Keep Furniture In Place When In Use.
Great Choice - Great Choice For Protecting Your Furniture And Floor. It Can Be Applied To Many Kinds Of Furniture Legs, Including Metal Furniture Legs And Wood Furniture Legs. Suitable For The Hardwood Floor, Vinyl Floor, Tile Floor And Laminate Floor, Etc.
Easy Installation - Simple Assembly And Not Easy To Fall Off. You Can Finish The Mounting Process By Cover It On The Feet Of The Furniture, Without Nail Or Other Tools.
Floor Protector - This Rubber Leg Cap Likes A Glove For The Furniture, Protect Your Beautiful Hardwood, Ceramic Tile And Linoleum Floors From Marring And Scratches. Moreover, The Caps Help Extend The Life Of Your Furniture By Protecting Them From Rough Outdoor Surfaces Like Gravel And Concrete.
Features
- SIZE - Package Include: 16 x Leg Caps
- FLOOR PROTECTOR - This rubber leg cap likes a glove for the furniture, protect your beautiful hardwood, ceramic tile and linoleum floors from marring and scratches. Moreover, the caps help extend the life of your furniture by protecting them from rough outdoor surfaces like gravel and concrete
- REDUCE NOISE - This leg cap can greatly reduce the noise, you could no more worry about suffering a harsh sound when moving the furniture. Anti-slip bottom surface will be more anti-skid than the original rubber feet, keep furniture in place when in use
- EASY INSTALLATION - Simple assembly and not easy to fall off. You can finish the mounting process by cover it on the feet of the furniture, without nail or other tools
- GREAT CHOICE - Great choice for protecting your furniture and floor. It can be applied to many kinds of furniture legs, including metal furniture legs and wood furniture legs. Suitable for the hardwood floor, vinyl floor, tile floor and laminate floor, etc
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 inches
See On Amazon #7
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell M-24 Drive V-Belt Industrial Power Rubber Transmission Belt 24" Pitch Girth 10mm Width 5.5mm Height JIS Standard
Asin: B07SL331GT
Function: To Link Two Or More Rotating Shafts To Transmit Power In A Drive System. Even Load Distribution On Belt Drives And Good Wear Resistance..
Applications: Used For Drive Systems In The Automotive, Agricultural, Textile, Printing, Mining, And Office Equipment Industries, Ect..
Feature: The Trapezoidal Shape Of The Belts Cross Section Wedges Into The Groove Of A Similarly Shaped Sheave Or Pulley To Provide Traction And Alignment..
Material: It Is Made Of Neoprene Rubber For Resistance To Oils, Water, And Some Solvents..
Features
- Size: Model: M-24; Pitch Girth: 24 inch; Inner Girth: 588 mm/23"; Outer Girth: 620mm; Top Width: 10mm; Thickness: 5.5mm; Angle: 40 degree. Produced according to the Japanese standard JIS K 6323.
- Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.
- Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
- Feature: The trapezoidal shape of the belts cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment.
- Applications: Used for drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, ect.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 24.00 x 0.39 inches | Weight: 0.00 pounds
See On Amazon #9
uxcell Brass Fitting Connector Metric M12-1.25 Male to Barb Fit Hose ID 8mm 2pcs
Asin: B07Z9RVHRK | Model: a19091800ux0440 | PartNumber: a19091800ux0440
This Barb Fitting Is Made Of Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability..
Hose Barb Fitting Is Commonly Used To Connect Lines For Air, Water, Fuel, Oil And Inert Gases In A Quick And Simple Way..
The Barbed Stems Create A Tight Seal On Flexible And Semi-Rigid Hose When Used With A Hose Clamp Or Crimp Sleeve Or Ferrule (Not Included)..
One Side Is Used To Connect Hoses While The Other Side Is Used To Connect To Metric Female Pipes..
Features
- Size: 8mm Barb x M12-1.25 Male; Total Length: 34mm / 1.34"; Hex Width: 12mm / 0.47"; Barb Length(Approx): 20mm / 0.79"; Thread Length(Approx): 10mm / 0.39"
- One side is used to connect hoses while the other side is used to connect to metric female pipes.
- This barb fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included).
- Hose barb fitting is commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 3 x 30mm(Approx 1/8") Dowel Pin 304 Stainless Steel Pegs Support Shelves 30Pcs
Asin: B07YKZJB6Z | Model: a19090600ux0212 | PartNumber: a19090600ux0212
Easy To Install: This Cylindrical Locating Pin Has Special On The Two Ends Of The Pin, So That The Pin Can Be Easily Inserted Into The Mounting Hole. Please Confirm The Size Of The Locating Pin You Need Before Purchase..
Notice: In Order To Make Dowel Pins A Tight Fit, Your Hole Should Be Equal To Or Slightly Smaller Than The Diameter Shown (Less Than Or Equal To 3 Mm).
Application: Mainly Used For Metal Devices, Such As Punching Punch, Industrial , Fixture, Pin Gauge, Hinge Or Shaft Fixed Application.
Material: These Dowel Pin Steel Are Made Of 304 Stainless Steel. Its Surface Is Very Smooth. They Are Rust-Resistant, Corrosion-Resistant, Strong And Durable For Long Using Life..
Features
- Size Diameter:3mm/0.12" and Tolerance:+0.0008"/-0.0008";Height:30mm/1.18" and Tolerance:+0.02"/-0.02";Finish Type:Centerless grinding.
- Material: These Dowel Pin Steel are made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, corrosion-resistant, strong and durable for long using life.
- Easy to install: This cylindrical locating pin has special on the two ends of the pin, so that the pin can be easily inserted into the mounting hole. Please confirm the size of the locating pin you need before purchase.
- Application: Mainly used for metal devices, such as punching punch, industrial , fixture, pin gauge, hinge or shaft fixed application
- Notice: In order to make dowel pins a tight fit, your hole should be equal to or slightly smaller than the diameter shown (less than or equal to 3 mm)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Worm Gear Hose Clamp, 12pcs 3/8" - 5/8" Adjustable Stainless Steel Hose Clamps Duct Clamp for Securing Hose, Pipe, Plumbing, Tube and Fuel Line
Asin: B0CGZFY7GS
Quality Material: This Hose Clamp Is Made Of Stainless Steel, Which Has The Characteristics Of Corrosion Resistance, Rust Resistance, And High Strength. It Can Be Used In Harsh Environments Such As Humidity, Acid, Alkali, Etc., To Ensure Its Long-Term Stable Operation..
Wide Application: The Worm Gear Drive Hose Clamp Locks Firmly And Fastens, Widely Used In Home, Garden, Industry, Machinery, Electronics, Automobile, Boat, Marine And So On. Suitable For Securing Hoses, Pipes, Cables, Tubes, Fuel Lines, And More..
Easy To Use: The Installation Method Of The Duct Pipe Clamp Is Simple, Just Insert The Pipe Into The Openings At Both Ends Of It And Fix It By Tightening The Thread..
Flexible Design: The Pipe Clamp Features A Flexible Opening Design That Allows For Easy Size Adjustment Based On The Pipe Diameter, Eliminating The Need For Changing Fittings Or Adding Other Accessories. The Clamping Range Indicates The Minimum And Maximum Size The Hose Clamp Can Be Adjusted To..
Features
- Adjustable Hose Clamp Size: Clamping Range: 10mm - 16mm / 3/8" - 5/8"; Band Width: 8mm / 0.31"
- Flexible Design: The pipe clamp features a flexible opening design that allows for easy size adjustment based on the pipe diameter, eliminating the need for changing fittings or adding other accessories. The clamping range indicates the minimum and maximum size the hose clamp can be adjusted to.
- Quality Material: This hose clamp is made of stainless steel, which has the characteristics of corrosion resistance, rust resistance, and high strength. It can be used in harsh environments such as humidity, acid, alkali, etc., to ensure its long-term stable operation.
- Easy to Use: The installation method of the duct pipe clamp is simple, just insert the pipe into the openings at both ends of it and fix it by tightening the thread.
- Wide Application: The worm gear drive hose clamp locks firmly and fastens, widely used in home, garden, industry, machinery, electronics, automobile, boat, marine and so on. Suitable for securing hoses, pipes, cables, tubes, fuel lines, and more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Rubber Sink Plug, White Drain Stopper Fit 1" to 1-1/16" Drain with Hanging Ring for Bathtub Kitchen and Bathroom 3pcs
Asin: B0B51M5C7T | Model: a22041200ux1066 | PartNumber: a22041200ux1066
Made Of Rubber, Durable And Easy To Clean, Effectively Preventing Sink Leakage..
Rubber Drain Plugs Are Suitable For Most Places, Such As Bathroom And Kitchen Sinks, Drains, Bathtubs, Laundry Sinks, Etc..
Designed With A Hanging Ring, Which Makes It Easy To Remove. A Good Replacement For The Broken, Missing, Or Ineffective Drain Plug..
Total Size: 23 X 28 X 10Mm / 0.91" X 1.1" X 0.39" (Min.D*Max.D*T).
Features
- Fit Drain Hole Diameter: 25 - 27mm / 1" - 1 1/16"
- Total Size: 23 x 28 x 10mm / 0.91 x 1.1 x 0.39 (Min.D*Max.D*T)
- Made of rubber, durable and easy to clean, effectively preventing sink leakage.
- Designed with a hanging ring, which makes it easy to remove. A good replacement for the broken, missing, or ineffective drain plug.
- Rubber drain plugs are suitable for most places, such as bathroom and kitchen sinks, drains, bathtubs, laundry sinks, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Foam Tubing for Handle Grip Support, Pipe Insulation, 3/8"(10mm) ID 20mm OD 2m Length Black
Asin: B0951ZXR9J | Model: a21011400ux0117 | PartNumber: a21011400ux0117
Advantage - High Elasticity, Strong Tensile, Easy To Bend, And Aging Resistant.
Widely Application - It Is Used To Protect The Handle, Such As For Fitness Equipment, Utensil, Etc. Heat Preservation Insulated For Pipe, Increase The Softness, Anti-Skid And Wear Resistance, Heat Insulation. The Smaller Foam Tubing Is Suitable For Use With Tools, Pens And Other Items With Small Handles. The Larger Foam Tubing Is Suitable For Use With The Handle Of Fitness Equipment.
Non-Slip - Anti-Skid Foam Is Fixed On Tools Or Appliances And Is Not Easy To Slip.Please Note That When Inserting The Rod, It Could Be Easier To Insert To The Foam Tubing With Using Some Lubricant Or Water On The Rod Surface.
Rubber Material - The Tubing Is Made Of Rubber Material, Soft And Durable, Can Be Used Repeatedly. Working Temperature Is -40°C To 80°C(-40°F To 176°F).
Features
- Foam Tubing- 3/8-inch(10mm) inner dia, 20mm outer dia, 5mm wall thickness, 2m(6.6ft) total length. Suitable 9-10mm OD pipe
- Rubber Material - The tubing is made of rubber material, soft and durable, can be used repeatedly. Working temperature is -40 C to 80 C(-40 F to 176 F)
- Advantage - High elasticity, strong tensile, easy to bend, and aging resistant
- Non-slip - Anti-skid foam is fixed on tools or appliances and is not easy to slip.Please note that when inserting the rod, it could be easier to insert to the foam tubing with using some lubricant or water on the rod surface
- Widely Application - It is used to protect the handle, such as for fitness equipment, utensil, etc. heat preservation insulated for pipe, increase the softness, anti-skid and wear resistance, heat insulation. The smaller foam tubing is suitable for use with tools, pens and other items with small handles. The larger foam tubing is suitable for use with the handle of fitness equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 79.20 x 0.79 inches
See On Amazon #14
uxcell 51100 Thrust Ball Bearings 10mm x 24mm x 9mm Chrome Steel ABEC3 Single Row Roller 2pcs
Asin: B07G843Z81 | Model: a18062000ux0224 | PartNumber: a18062000ux0224
[Capability] - Dynamic Load Rating (Cr): 10Kn; Static Load Rating (Cor): 14Kn; Limiting Speed (Grease): 6500Rpm, Designed For Low Speed Operation And Axial Loads Only.
[Features] - The Separable Components Of Thrust Ball Bearings Are Interchangeable. Low Noise And Long Service Life, Easy To Maintain. Keep The Bearing Working Environment Clean And Bearing Lubricated In Time.
[Application] - Can Be Used For Oven Turntable, Jack, Pump, Rotating Applications, Machine Tools, Automobiles, Ect..
[Material] - Made Of Chrome Steel(Aisi 52100), Have Great Wear-Resistant, High Temperature Resistance And High Hardness; Steel Cage.
Features
- [SIZE] - Bore Diameter=10mm, Outer Diameter=24mm, Thickness=9mm
- [MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Steel cage
- [CAPABILITY] - Dynamic Load Rating (Cr): 10kN; Static Load Rating (Cor): 14kN; Limiting Speed (Grease): 6500rpm, designed for low speed operation and axial loads only
- [APPLICATION] - Can be used for oven turntable, jack, pump, rotating applications, machine tools, automobiles, ect.
- [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 inches
See On Amazon #15
uxcell 36pcs Mixed Colour 5mm LEDs Prewired Light DC3-6V 20cm Pre Wired LED
Asin: B07X61RJ83 | Model: a19061100ux0272 | PartNumber: a19061100ux0272
【Features】- Pre-Wired With Built In Resistor; 5Mm Round Top Bulb And Wired Led's-Easy Connection With 3-6V Dc Drive It, 7.9 Inch Long Wires..
【Advantage】- 20Cm Long Flexible Cable, Low Power Consumption And Stable Performance, High Performance..
【Easy To Use】- Easy To Use, You Just Need To Connect The Positive And Negative Wires To Your Battery Or Power Supply..
【Unleash Your Creativity】- Great For Christmas Decoration, Parties, Scale Building, Robot Decor, Guitar Diy, Rc Helicopter, Quadcopters, Rc Car, Headlights, Sign Indicate Light, Science Experiment, Boat, Industrial, Camera, Hobby Lighting, Wedding Decor, Diy, Etc..
Features
- Specification - 6 Colors Included: Red/Blue/Orange/Emerald Green/White/Purple; Package Includes: 36PCS x Pre-wired LEDs(6PCS X 6 Colors).
- Unleash Your Creativity - Great for Christmas decoration, Parties, scale building, robot decor, guitar DIY, RC helicopter, quadcopters, RC car, headlights, sign indicate light, science experiment, boat, industrial, camera, hobby lighting, wedding decor, DIY, etc.
- Features - Pre-wired with built in Resistor; 5mm round top bulb and wired LED's-Easy Connection with 3-6V DC Drive it, 7.9 inch long wires.
- Easy to Use - Easy to use, you just need to connect the positive and negative wires to your battery or power supply.
- Advantage - 20cm Long flexible cable, Low power consumption and stable performance, high performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.15 pounds
See On Amazon #16
uxcell #35 Chain Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Sprocket Tensioner, C45 Carbon Steel 35 Roller Chain Sprocket with Bearing for ISO 06C Chain, 2Pcs
Asin: B0CCW63929
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 15; Outside Diameter: 49mm / 1.93-inch; Bump Width: 5mm / 0.2-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 4mm / 0.16-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSJZXN | Model: a19091500ux0224 | PartNumber: a19091500ux0224
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm; Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Aluminum Crimping Loop Sleeve Double Barrel for 5/16"-3/8" Wire Rope Pack of 5
Asin: B0741418TC | Model: a17022700ux0342 | PartNumber: a17022700ux0342
Simple Operation - Just Need To Lock The Crimp Loop With Pliers Or Compression Tools..
Tips - The Aluminum Crimping Loop Sleeve Is For Wire Rope Management And Cannot Be Used For Lifting Work. Please Select The Appropriate Aluminum Sleeve According To The Size Of The Wire Rope To Prevent It From Bursting..
Wide Applications - These Crimping Sleeves Are Suitable For Dog Ropes, Clothesline Or Or Anything Else That Require Strong Cable. They Also Fit For Hanging Photo Frames And Lights And Other Decorations, Can Meet Different Needs In Your Daily Life..
Material - Made Of Aluminum For Corrosion Resistance, Polished Appearance..
Features
- Fit for Wire Rope Diameter: 5/16-3/8 Inch; Overall Size: 34x30x18mm / 1.34x1.18x0.71 Inch(L*W*H)
- Material - Made of aluminum for corrosion resistance, polished appearance.
- Simple Operation - Just need to lock the crimp loop with pliers or compression tools.
- Wide Applications - These crimping sleeves are suitable for dog ropes, clothesline or or anything else that require strong cable. They also fit for hanging photo frames and lights and other decorations, can meet different needs in your daily life.
- Tips - The aluminum crimping loop sleeve is for wire rope management and cannot be used for lifting work. Please select the appropriate aluminum sleeve according to the size of the wire rope to prevent it from bursting.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell #2 x 3/8" Phillips Pan Head Self-Tapping Screw, 100pcs - 304 Stainless Steel Round Head Wood Screw Full Thread (Black)
Asin: B0CCRWJM8X
[Design] - The Pan Head Design Of These Screws Provides A Flat Surface That Is Flush With The Material They Are Screwed Into, Which Provides Greater Support And Stability. The Screw's Pan Head Shape Provides A Smooth Surface Finish, Enhancing The Overall Aesthetic Of The Project..
[Application] - These Phillips Pan Head Self-Tapping Screws Are Commonly Used In Automotive, Industrial, Construction, Electronics Assembly, Machinery Manufacturing, Furniture Production, And Automotive Repair And Electrical Industries Due To Their Strength, Reliability, And Durability..
[Easy To Use] - These Phillips Pan Head Self-Tapping Screws Are Easy To Use, Requiring Only A Screwdriver To Install. The Screw's Pointed Tail Can Be Through In Sheet Metal, Wood, Or Plastic Materials, Making Them Versatile And Adaptable..
[Good Material] - Made Of Good Quality 304 Stainless Steel, These Screws Are Rust-Resistant, Durable, And Can Withstand Harsh Environments Or Exposure To Moisture Without Corroding. This Ensures Optimal Durability And Longevity, Making It Suitable For Both Indoor And Outdoor Applications..
Features
- [Basic Size] - The Phillips Pan Head Self-tapping Screw is a highly functional fastener that a thread diameter of 2.2mm, a Screw length of 10mm, a head diameter of 3.8mm, and a head thickness of 1.5mm.
- [Good Material] - Made of good quality 304 stainless steel, these screws are rust-resistant, durable, and can withstand harsh environments or exposure to moisture without corroding. This ensures optimal durability and longevity, making it suitable for both indoor and outdoor applications.
- [Design] - The pan head design of these screws provides a flat surface that is flush with the material they are screwed into, which provides greater support and stability. The screw's pan head shape provides a smooth surface finish, enhancing the overall aesthetic of the project.
- [Easy to Use] - These Phillips Pan Head Self-tapping Screws are easy to use, requiring only a screwdriver to install. The screw's pointed tail can be through in sheet metal, wood, or plastic materials, making them versatile and adaptable.
- [Application] - These Phillips Pan Head Self-tapping Screws are commonly used in automotive, industrial, construction, electronics assembly, machinery manufacturing, furniture production, and automotive repair and electrical industries due to their strength, reliability, and durability.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell Brass Tube, 1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm OD x 0.2mm Wall Thickness 300mm Length Seamless Round Pipe Tubing, Pack of 10
Asin: B08HYP8H8R | Model: a20081800ux0065 | PartNumber: a20081800ux0065
[Applications] - Commonly Used In Machinery, Diy Projects, Hobbies, Crafts, Building Models, Building Decorations, Frames, Industrial, Gardening Products, And So On..
[Seamless Construction] - The Interior Is Smooth Without Seams And Is Available In An Extruded Structural Or A Drawn Seamless Brass Round Tube For Precision Applications..
[Weldable & Cuttable] - Brass Tubing Can Be Welded And Processed To Different Lengths According To Your Needs By Using The Right Equipment..
[Durable Brass Tube] - Made Of Brass With Polishing Finish For High Strength, Good Thermal Conductivity, Corrosion Resistance, High-Temperature Resistance, And Can Be Used On Various Occasions..
Features
- [PRODUCT PARAMETER] - 1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm OD; 0.2mm Wall Thickness; 300mm/11.81inch Length.
- [DURABLE BRASS TUBE] - Made of brass with polishing finish for high strength, good thermal conductivity, corrosion resistance, high-temperature resistance, and can be used on various occasions.
- [APPLICATIONS] - Commonly used in machinery, DIY projects, hobbies, crafts, building models, building decorations, frames, industrial, gardening products, and so on.
- [WELDABLE & CUTTABLE] - Brass tubing can be welded and processed to different lengths according to your needs by using the right equipment.
- [SEAMLESS CONSTRUCTION] - The interior is smooth without seams and is available in an extruded structural or a drawn seamless brass round tube for precision applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 11.81 x 0.24 Inches | Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search