TEMCo THA004 3" Conduit Punch and Die For Hydraulic Knock Out Driver 3/4"-16 Thread
Asin: B07NJG273Q | Model: THA004 | PartNumber: THA004
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Standard Thread - Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100).
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 3", Actual Hole Size: 3.5"
- Required Punching Force: 13 US Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100)
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon Similar To TEMCo THA004 3 Conduit Punch
#1
TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty
Asin: B00HJX58HG | Model: TH0004 | PartNumber: TH0004 | Ean: 0799491873490 | UPC: 799491873490
Punching Thickness Capacity: 1/8 Inch (11 Ga) Steel Punching Capacity, 1/16 Inch Stainless Steel..
5 Year Warranty From A Well-Known American Name. Non-Generic.
Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only), Fiberglass, Plastic.
6 Die Sets For Conduit Fitting Size: ½, ¾, 1, 1¼, 1 ½, 2". All Dies Have Laser Engraved Alignment Marks For Easy And Precise Positioning..
Features
- Powerful 9 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads.
- 6 Die Sets for conduit fitting size: , , 1, 1 , 1 , 2. All dies have laser engraved alignment marks for easy and precise positioning.
- Punching Thickness Capacity: 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel.
- Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
- 5 Year Warranty from a well-known American name. NON-GENERIC
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
Weight: 24.00 Pounds
See On Amazon #2
TEMCo TH0037 4" Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty
Asin: B015OUGBV2 | Model: TH0037 | PartNumber: TH0037
Slug Splitting Designed Dies For Easy Slug Removal That Leaves A Round Hole With Clean Edges And A Uniform Size Is Provided On Punch Sizes ½", ¾", 1", 1¼", 1 ½" & 2".
Punching Thickness Capacity: 1/8 Inch (11 Ga) Steel, 1/16 Inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only), Fiberglass And Plastic.
Deep Draw Dies That Are Designed With An Optimized Angle On The Cutter Face That Requires Less Force To Make The Cut, Reducing Operator And Tool Fatigue Is Provided On Punch Sizes 2 ½",3", 3 ½" & 4".
10 Dies For Conduit Fitting Sizes: ½", ¾", 1", 1¼", 1 ½", 2", 2 ½",3", 3 ½", 4" - Complete Kit Comes In A Rugged Storage Case With A 5 Year Warranty.
Features
- True 13 US ton hydraulic knockout punch with 10 dies. All dies have laser engraved alignment marks for easy and precise positioning. Compatible with GREENLEE and other domestic punch tooling - 3/4-16 & 3/8-23
- 10 dies for conduit fitting sizes: , , 1, 1 , 1 , 2, 2 ,3, 3 , 4 - Complete kit comes in a rugged storage case with a 5 Year Warranty
- Slug splitting designed dies for easy slug removal that leaves a round hole with clean edges and a uniform size is provided on punch sizes , , 1, 1 , 1 & 2
- Deep Draw dies that are designed with an optimized angle on the cutter face that requires less force to make the cut, reducing operator and tool fatigue is provided on punch sizes 2 ,3, 3 & 4
- Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and Plastic
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo Industrial
See On Amazon #3
TEMCo THA003 2-1/2" Conduit Punch and Die For Hydraulic Knock Out Driver 3/4"-16 Thread
Asin: B07NJ8GW5Z | Model: THA003 | PartNumber: THA003
Standard Thread - Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100).
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 2-1/2", Actual Hole Size: 3"
- Required Punching Force: 13 US Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100)
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #4
TEMCo THA005 3-1/2" Conduit Punch and Die For Hydraulic Knock Out Driver 3/4"-16 Thread
Asin: B07NJQDJMZ | Model: THA005 | PartNumber: THA005
Standard Thread - Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100).
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 3-1/2", Actual Hole Size: 3.93"
- Required Punching Force: 13 US Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100)
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #5
TEMCo Hydraulic Knockout Punch Driver Electrical Conduit Hole KO Tool 3/4"-16
Asin: B086K4KXS6 | Model: THA043 | PartNumber: THA043
Hydraulic Unit Is The Same Unit Used For Temco Th0037 Knockout Punch..
5 Year Warranty From A Well-Known American Name..
Compatible With Greenlee And Other Domestic Punch Tooling, Draw Studs Or Arbors That Use 3/4-16 Thread Size.
Features
- Hydraulic unit provides true 13 US ton hydraulic punching force.
- Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use 3/4-16 thread size
- Hydraulic unit is the same unit used for TEMCo TH0037 Knockout Punch.
- 5 Year Warranty from a well-known American name.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #6
TEMCo THA006 4" Conduit Punch and Die For Hydraulic Knock Out Driver 3/4"-16 Thread
Asin: B07NJ67TNP | Model: THA006 | PartNumber: THA006
Standard Thread - Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100).
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 4", Actual Hole Size: 4.5"
- Required Punching Force: 13 US Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100)
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #7
TEMCo THA114 3" Deep Draw Conduit Punch and Die for Hydraulic Knock Out Driver
Asin: B09Z7FXX86 | Model: THA114 | PartNumber: THA114
Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100 Draw Studs).
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Required Punching Force: 13 Us Tons..
Features
- Deep Draw Conduit punch for Fitting Size:3", Actual Hole Size: 3.5"
- Required Punching Force: 13 US Tons.
- Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100 draw studs)
- Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #8
TEMCo THA116 4" Deep Draw Conduit Punch and Die for Hydraulic Knock Out Driver
Asin: B09Z7GJXG5 | Model: THA116 | PartNumber: THA116
Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100 Draw Studs).
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Required Punching Force: 13 Us Tons..
Features
- Deep Draw Conduit punch for Fitting Size: 4", Actual Hole Size: 4.5"
- Required Punching Force: 13 US Tons.
- Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100 draw studs)
- Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #9
TEMCo TH0360 Industrial 2-1/2", 3", 3-1/2", 4" Conduit Punch and Die Set for Knockout
Asin: B07J25DJ1G | Model: TH0360 | PartNumber: TH0360 | Ean: 0603275108961 | UPC: 603275108961
Comes With Metric To English Conversion Draw Stud..
5 Year Guarantee Or 1 Year No Questions Asked Return Policy - We Pay For Shipping Both Ways..
Max Punching Thickness Of 1/8" (11 Ga) Steel, 1/16" Stainless Steel..
Made Of Tough Hardened Tool Steel..
Features
- 13 US ton driver required. TEMCo THA043 or TH0037 set will both work. Compatible with TEMCo Industrial, Greenlee, and many other drivers.
- Made of tough hardened tool steel.
- Comes with Metric to English conversion draw stud.
- Max punching thickness of 1/8 (11 ga) Steel, 1/16 Stainless Steel.
- 5 Year Guarantee or 1 Year no questions asked return policy - we pay for shipping both ways.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo Industrial
See On Amazon #10
TEMCo THA108 3/4" Slug Splitting Conduit Punch - Die for Hydraulic Knock Out Driver
Asin: B09YN3QHCH | Model: THA108 | PartNumber: THA108
Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100 Draw Studs).
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Required Punching Force: 9 Us Tons..
Features
- Slug Splitting Conduit Punch for Fitting Size: 3/4", Actual Hole Size: 1.05"
- Required Punching Force: 9 US Tons.
- Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100 draw studs)
- Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #11
TEMCo TH0397 Manual Knockout Punch Driver Kit for inch to 1-1/4 inch Electrical Conduit Hole Sizes (1/2"- 1-1/4" Conduit Size)
Asin: B0861G2P2W
Slug Splitting Design On Punches Allows For Easier Slug Removal – The Smooth Operation Leaves The Round Hole With Clean Edges And A Uniform Size. Manual Punch Works For Use In Tight Areas..
Draw Stud Threads Are Compatible With Tha001 And Tha013 Draw Studs, Allowing For Use On Temco Hydraulic Drivers Th0004 And Th0037 Or Equivalent..
Kit Comes In A Rugged Storage Case. Storage Case Is Designed With A Secure-Closing Lid For Keeping All The Pieces Neatly Organized For Easy Transport..
Capacity: Mild Steel Plate Up Through 3.5Mm (10 Gauge) Works To Punch Mild Steel, Aluminum, Fiberglass And Plastic..
Features
- Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4"
- Capacity: Mild steel plate up through 3.5mm (10 gauge) Works to punch mild steel, Aluminum, Fiberglass and plastic.
- Slug splitting design on punches allows for easier slug removal the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas.
- Kit comes in a rugged storage case. Storage case is designed with a secure-closing lid for keeping all the pieces neatly organized for easy transport.
- Draw Stud threads are compatible with THA001 and THA013 draw studs, allowing for use on TEMCo hydraulic drivers TH0004 and TH0037 or equivalent.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #12
TEMCo TH0391-1/2" Conduit Hole Size Knockout Punch Unit with Manual Draw Stud (0.86" Actual Hole Size)
Asin: B084X69Z67 | Model: TH0391 | PartNumber: TH0391
Capacity: Mild Steel Plate Through 10 Gauge (3.5Mm) Works To Punch Mild Steel, Brass, Copper, Aluminum (Soft Alloys Only), Fiberglass And Plastic..
Slug Splitting Design On Punches Allows For Easier Slug Removal – The Smooth Operation Leaves The Round Hole With Clean Edges And A Uniform Size. Manual Punch Works Great In Tight Areas. Punch Dies Feature Laser Engraved Alignment Marks For Easy And Precise Positioning..
Knockout Punch Can Be Used With Ratchet, Wrench, Or Electric Driver..
Features
- Punch units are complete units consisting of the " conduit punch and draw stud makes a 0.86" sized hole
- Knockout punch can be used with ratchet, wrench, or electric driver.
- Capacity: Mild steel plate through 10 gauge (3.5mm) Works to punch Mild steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and plastic.
- Slug splitting design on punches allows for easier slug removal the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works great in tight areas. Punch dies feature laser engraved alignment marks for easy and precise positioning.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo Industrial
See On Amazon #13
TEMCo THA040 3" Conduit Punch and Die For METRIC Hydraulic Knock Out Driver M20x1.5mm Thread
Asin: B07NJFDZNF | Model: THA040 | PartNumber: THA040
Metric Thread - Fits Draw Stud Size: M20x1.5Mm (Temco Tha010 And Tha011). This Does Not Fit Temco Draw Stud Tha001 Or Tha100..
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 3", Actual Hole Size: 3.5"
- Required Punching Force: 13 US Tons
- METRIC THREAD - Fits Draw Stud Size: M20x1.5mm (TEMCo THA010 and THA011). This DOES NOT fit TEMCo draw stud THA001 or THA100.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #14
TEMCo THA033 3/4" Conduit Punch and Die For Hydraulic Knock Out Driver
Asin: B07NJ5RYK6 | Model: THA033 | PartNumber: THA033
Fits Draw Stud Size: Temco Tha012, Tha013, Tha015 Or Any Draw Stud With A Diameter Of 0.430" (10.90Mm) Note: This Die Set Does Not Have Threads..
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More. Note: No Threads. Meant To Be Used With Temco Draw Stud Or Any 0.430" Diameter Draw Stud With Knurled Nut..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 9 Us Tons.
Features
- Conduit Fitting Size: 3/4", Actual Hole Size: 1.05"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430 (10.90mm) NOTE: This die set DOES NOT have threads.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more. NOTE: No threads. Meant to be used with TEMCo draw stud or any 0.430 diameter draw stud with knurled nut.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #15
TEMCo THA034 1" Conduit Punch and Die For Hydraulic Knock Out Driver 3/4"-16 Thread
Asin: B07NJQDJMX | Model: THA034 | PartNumber: THA034
Standard Thread - Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100).
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 9 Us Tons.
Features
- Conduit Fitting Size: 1", Actual Hole Size: 1.33"
- Required Punching Force: 9 US Tons
- STANDARD THREAD - Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100)
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #16
TEMCo THA042 4" Conduit Punch and Die For METRIC Hydraulic Knock Out Driver M20x1.5mm Thread
Asin: B07NJB4445 | Model: THA042 | PartNumber: THA042
Metric Thread - Fits Draw Stud Size: M20x1.5Mm (Temco Tha010 And Tha011). This Does Not Fit Temco Draw Stud Tha001 Or Tha100..
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 13 Us Tons.
Features
- Conduit Fitting Size: 4", Actual Hole Size: 4.5"
- Required Punching Force: 13 US Tons
- METRIC THREAD - Fits Draw Stud Size: M20x1.5mm (TEMCo THA010 and THA011). This DOES NOT fit TEMCo draw stud THA001 or THA100.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- See more on Amazon...
Brand: Temco | Manufacturer: TEMCo
See On Amazon #17
TEMCo THA113 2-1/2" Deep Draw Conduit Punch - Die for Hydraulic Knock Out Driver
Asin: B09Z7F5J58 | Model: THA113 | PartNumber: THA113
Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100 Draw Studs).
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Required Punching Force: 13 Us Tons..
Features
- Deep Draw Conduit punch for Fitting Size: 2-1/2", Actual Hole Size: 3"
- Required Punching Force: 13 US Tons.
- Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100 draw studs)
- Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #18
TEMCo THA112 2" Slug Splitting Conduit Punch - Die for Hydraulic Knock Out Driver
Asin: B09Z7G1T63 | Model: THA112 | PartNumber: THA112
Fits Draw Stud Size: 3/4"-16 (Temco Tha001 And Tha100 Draw Studs).
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More..
Required Punching Force: 9 Us Tons..
Features
- Slug Splitting Conduit Punch for Fitting Size: 2", Actual Hole Size: 2.36"
- Required Punching Force: 9 US Tons.
- Fits Draw Stud Size: 3/4-16 (TEMCo THA001 and THA100 draw studs)
- Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #19
TEMCo THA032 1/2" Conduit Punch and Die For Hydraulic Knock Out Driver
Asin: B07BHWBY71 | Model: THA023 | PartNumber: THA023
Fits Draw Stud Size: Temco Tha012, Tha013, Tha015 Or Any Draw Stud With A Diameter Of 0.430" (10.90Mm) Note: This Die Set Does Not Have Threads..
Made Of Hardened Tool Steel With Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (Soft Alloys Only, Not For Use With 7075 Or Other Super Alloys), Fiberglass, Plastic And More. Note: No Threads. Meant To Be Used With Temco Draw Stud Or Any 0.430" Diameter Draw Stud With Knurled Nut..
Punching Thickness Capacity: 1/8" (11 Ga) Steel, 1/16" Stainless Steel.
Required Punching Force: 9 Us Tons.
Features
- Conduit Fitting Size: 1/2", Actual Hole Size: 0.86"
- Required Punching Force: 9 US Tons
- Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430 (10.90mm) NOTE: This die set DOES NOT have threads.
- Punching Thickness Capacity: 1/8 (11 ga) Steel, 1/16 Stainless Steel
- Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use with 7075 or other super alloys), Fiberglass, Plastic and more. NOTE: No threads. Meant to be used with TEMCo draw stud or any 0.430 diameter draw stud with knurled nut.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon
Looking For Something Else?
Search