Onyehn 10pcs Low Voltage DC Motor Speed Controller 1.8v 3v 5v 6v 7.2v 12v 2A 30W PWM 1803BK Adjustable Driver Switch with Speed Control Knob(10 Pack)
Asin: B07NPJ5MQR | Model: 1803BK | PartNumber: 1803BK | Ean: 8011655415424
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.With A Self-Recovery Fuse 2A And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function..
This Is A Speed Governor With A Maximum Current Of 2A. If The Continuous Current Is Greater Than 0.5A, The 775 Motor And The Stroller Motor Will Not Move. Don't Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12V, Such As 12V Lead-Acid Batteries, Which May Cause Damage To The Governor..
Connect A Voltage Of 1.8V-15V Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits..
Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220V Ac.This Brand New 1803Bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%..
Features
- IMPORTANT NOTES AN APPROPRIATELY RATED FUSE (RATED A LITTLE HIGHER THAN THE MAXIMUM CURRENT YOU EXPECT TO DRAW) IS RECOMMENDED TO ENSURE SAFE OPERATION. THE CONTROLLER IS SAFE WITH A SELF-RECOVERY FUSE 2A. IT WILL BE DAMAGED IF CONNECT THE SUPPLY VOLTAGE WITH WRONG POLARITY. DOUBLE CHECK ALL CONNECTIONS BEFORE APPLYING POWER AND ALWAYS TURN OFF THE POWER SUPPLY BEFORE MAKING ANY WIRING CHANGES
- NOTE: DC MOTOR SPEED REGULATOR DC POWER SUPPLY, DO NOT BE DIRECTLY CONNECTED TO HOUSEHOLD 220V AC.This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%.
- With a self-recovery fuse 2A and a Power-On LED light.If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling. PWM DC motor speed controller with switch function.
- CONNECT A VOLTAGE OF 1.8V-15V DC TO THE CIRCUIT MAKING SURE OF THE CORRECT POLARITY OF THE CONNECTION. NOTE THAT THE VOLTAGE APPLIED TO THE MOTOR WILL BE SUPPLY VOLTAGE APPLIED TO THE CIRCUIT. IT IS RECOMMENDED TO ADD AN APPROPRIATELY RATED FUSE IN LINE WITH THE POSITIVE SUPPLY IN ORDER TO PROTECT THE CIRCUIT FROM ANY POSSIBLE SHORT CIRCUITS.
- This is a speed governor with a maximum current of 2A. If the continuous current is greater than 0.5A, the 775 motor and the stroller motor will not move. Don't buy it wrong. It is not recommended to supply power greater than 12V, such as 12V lead-acid batteries, which may cause damage to the governor.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Weight: 0.17 pounds
See On Amazon Similar To Onyehn 10pcs Low Voltage DC
#1
Onyehn 4pcs DC 12V-36V Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module
Asin: B09WQX4GCP | Model: 4 | PartNumber: 4 | Ean: 0768484434345 | UPC: 768484434345
On-Board Momentary Push Button To Set The Low Voltage Disconnect Parameter And 3 Digit Red Led Display The Parameter Easy To Operation.When The Battery Voltage Reach The Setting Values, The Module Will Disconnect Load Automatically To Aviod The Battery From Over Discharging To Prolong The Battery Lifetime. Reference Formula: Charging Voltage = Rated Voltage X 1.2; Charging Current = Rated Current X 0.2.
Display Is Accurate, The Switch Module Is Quickly To Open And Close When Near Minimum Voltage; Settings Is Stored Non-Volatile, It Can Keep Set When Power Off.
Package Included:4X Protection Module..
Reset:When The Power Is Off, Press And Hold The Two Buttons At The Same Time, And Then Power On. At This Time, The Screen Displays "888", Indicating That The Factory Settings Are Restored.The Factory-Set Protection Value: 12V, Difference Value: 2V. Difference Value"Is The Value Between The Battery Voltage To Disconnect And The Battery Voltage To Reconnect..
Programmable Battery Low Voltage Disconnect Switch For Dc12-36V Lead Acid Battery And Lithium Ion Battery. It's A Protection Switch Module, Not Included Batteries Itself.Compatible Battery: Lead Acid, Lithium Ion Battery, Solar Panel Battery.
Features
- Board Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H), Input Voltage Range: DC12-36V, Control Accuracy: 0.1V, Power Consumption: <1.5W, Maximum Amperage before Breaker Trips: 20A.
- Programmable battery low voltage disconnect switch for DC12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.Compatible Battery: lead acid, lithium ion battery, solar panel battery
- On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation.When the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. Reference formula: charging voltage = rated voltage x 1.2; charging current = rated current x 0.2
- Reset:When the power is off, press and hold the two buttons at the same time, and then power on. At this time, the screen displays 888, indicating that the factory settings are restored.The factory-set protection value: 12V, difference value: 2V. Difference Valueis the value between the battery voltage to disconnect and the battery voltage to reconnect.
- Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off
- Package Included:4x Protection Module.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #2
Onyehn 10pcs LM317 Adjustable Voltage Regulator Power Supply DC-DC Step-Down DC Converter Circuit Board Adjustable Linear Regulator 10 Pack
Asin: B07G59J3TL | Model: 5824093512 | PartNumber: 5824093512 | Ean: 8011513634370
The Output Voltage Can Be Adjusted To 1.25V-30V For Your Mobile Phone, Mp3, Mp4, Psp And Many Other Devices, Very Simple And Convenient..
The Front Stage Of The System Is Powered . When You Input The Power Supply Voltage Lower Than The Voltage You Need (1.25V-30V) When You Are Working On A Project, Choose It For Your Best Choice..
When Need 1.25-60V To Charge Your Electronic Device, There Only Have 12V Or 24V Battery Power, You Can Use It Directly To Step Down 1.25-30V To Solve Your Troubles..
On-Board Regulated Power Supply, Connect The Input End Of This Module To The Cigarette Lighter Of The Car, And Adjust The Potentiometer..
Features
- Adjustable three-terminal voltage regulator module, can replace all three-break voltage regulator modules such as 7805, 7806, 7809, 7812, 7824.
- On-board regulated power supply, connect the input end of this module to the cigarette lighter of the car, and adjust the potentiometer.
- The output voltage can be adjusted to 1.25V-30V for your mobile phone, MP3, MP4, PSP and many other devices, very simple and convenient.
- When need 1.25-60V to charge your electronic device, there only have 12V or 24V battery power, you can use it directly to step down 1.25-30V to solve your troubles.
- the front stage of the system is powered . When you input the power supply voltage lower than the voltage you need (1.25V-30V) when you are working on a project, choose it for your best choice.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.94 x 3.15 inches
See On Amazon #3
Battery Low Voltage Disconnect Module,Onyehn 2Pcs Dc 12V36V Voltage Protection Module Regulator Protector Electronic XhM609 1236V Digital Display Dc Battery Low Voltage Disconnect Protection Module
Asin: B0BX5P3T9C | Model: Tbestyp7f4ivgbz | PartNumber: Tbestyp7f4ivgbz
Main Functions The Voltage Protection Module Is Of Over Protection, Over Discharge Protection Function, Short Circuit Protection Function, Over Current Protection Function.
Overcurrent Protection Module This Module Can Effectively Protect The Circuit, When The Battery Is In Low Voltage Or Low Battery, It Will Be Automatically Disconnected..
Disconnected Automatically When The Battery Is Under Voltage Loss Or Low Battery, The Voltage Protection Module Will Be Automatically Disconnected.
High Performance:Made Of High Quality Materials, It Is Durable And Has A Long Service Life..
Features
- When the battery is under voltage loss or low battery, it will be automatically disconnected
- High Performance:Made of high quality materials, it is durable and has a long service life.
- MAIN FUNCTIONS The voltage protection module is of over protection, over discharge protection function, short circuit protection function, over current protection function
- DISCONNECTED AUTOMATICALLY When the battery is under voltage loss or low battery, the voltage protection module will be automatically disconnected
- OVERCURRENT PROTECTION MODULE This module can effectively protect the circuit, when the battery is in low voltage or low battery, it will be automatically disconnected.
- See more on Amazon...
Brand: Tbest | Manufacturer: Tbest
See On Amazon #4
Onyehn 2pcs 12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module
Asin: B07QNXM4LS | Model: XH-M609 | PartNumber: XH-M609 | Ean: 8431276576012
On-Board Momentary Push Button To Set The Low Voltage Disconnect Parameter And 3 Digit Red Led Display The Parameter Easy To Operation.When The Battery Voltage Reach The Setting Values, The Module Will Disconnect Load Automatically To Aviod The Battery From Over Discharging To Prolong The Battery Lifetime. (Note:The Relay Does Not Contain A Power Cut-Off Switch,Remember To Cut Off The Power Supply After Disconnection, Otherwise The Module Will Continue To Use The Battery Until The Voltage Is 0.).
Display Is Accurate, The Switch Module Is Quickly To Open And Close When Near Minimum Voltage; Settings Is Stored Non-Volatile, It Can Keep Set When Power Off.
Reset:When The Power Is Off, Press And Hold The Two Buttons At The Same Time, And Then Power On. At This Time, The Screen Displays "888", Indicating That The Factory Settings Are Restored.The Factory-Set Protection Value: 12V, Difference Value: 2V.Difference Value"Is The Value Between The Battery Voltage To Disconnect And The Battery Voltage To Reconnect..
Programmable Battery Low Voltage Disconnect Switch For Dc12-36V Lead Acid Battery And Lithium Ion Battery. It's A Protection Switch Module, Not Included Batteries Itself.Compatible Battery: Lead Acid, Lithium Ion Battery, Solar Panel Battery.Not Suitable For Battery Packs..
Features
- Board Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H), Input Voltage Range: DC12-36V, Control Accuracy: 0.1V, Power Consumption: <1.5W, Maximum Amperage before Breaker Trips: 20A.(Note:Due to the limitation of the size of the PCB board, the relay size of this module is mini and the circuit lines are very thin. The current should not be too large during actual use. If the current exceeds 8A, the relay contacts may be blown and cannot be used normally.) Package Included:2x Protection Module.
- Programmable battery low voltage disconnect switch for DC12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.Compatible Battery: lead acid, lithium ion battery, solar panel battery.Not suitable for battery packs.
- On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation.When the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. (Note:The relay does not contain a power cut-off switch,remember to cut off the power supply after disconnection, otherwise the module will continue to use the battery until the voltage is 0.)
- Reset:When the power is off, press and hold the two buttons at the same time, and then power on. At this time, the screen displays 888, indicating that the factory settings are restored.The factory-set protection value: 12V, difference value: 2V.Difference Valueis the value between the battery voltage to disconnect and the battery voltage to reconnect.
- Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #5
Onyehn 10pcs 0-24V MOSFET Button IRF520 MOS Driver Module for Arduino MCU ARM Raspberry pi
Asin: B07GLNCRR4 | Ean: 8011533039872
By Pwm Adjustable Can Realize Stepless Dimming Led, Motor Stepless Speed Regulation.
Max Load (Drain) Current: <5A,Output Load Voltage :0-24V.
Platform For Arduino, Scm, Arm, Raspberry Pi.
Can Let The Arduino Drive Up To 24 V Load, Such As Led Lights Belt, Dc Motor, Micro Pump, Solenoid Valve.
Features
- Using original IRF520 power MOS tube, can adjust PWM output
- Can let the Arduino drive up to 24 v load, such as LED lights belt, dc motor, micro pump, solenoid valve
- By PWM adjustable can realize stepless dimming LED, motor stepless speed regulation
- Platform for Arduino, SCM, ARM, Raspberry Pi
- Max load (drain) current: <5A,Output load voltage :0-24V
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
See On Amazon #6
Onyehn 4pcs Low Voltage DC Motor Speed Controller 1.8v 3v 5v 6v 7.2v 12v 2A 30W PWM 1803BK Adjustable Driver Switch with Speed Control Knob(4 Pack)
Asin: B08XQ22F47 | Model: 1803bk | PartNumber: 1803bk | Ean: 0719022857607 | UPC: 719022857607
With A Self-Recovery Fuse 2A And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function..
This Is A Speed Governor With A Maximum Current Of 2A. If The Continuous Current Is Greater Than 0.5A, The 775 Motor And The Stroller Motor Will Not Move. Don't Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12V, Such As 12V Lead-Acid Batteries, Which May Cause Damage To The Governor..
Connect A Voltage Of 1.8V-15V Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits..
Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220V Ac.This Brand New 1803Bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%..
Features
- Important Notes An Appropriately Rated Fuse (Rated A Little Higher Than The Maximum Current You Expect To Draw) Is Recommended To Ensure Safe Operation. The Controller Is Safe With A Self-Recovery Fuse 2a. It Will Be Damaged If Connect The Supply Voltage With Wrong Polarity. Double Check All Connections Before Applying Power And Always Turn Off The Power Supply Before Making Any Wiring Changes
- Note: Dc Motor Speed Regulator Dc Power Supply, Do Not Be Directly Connected To Household 220v Ac.This Brand New 1803bk Dc Motor Speed Controller Allows Controlling The Direction Of A Dc The Motor Using A Pulse-Width-Modulated (Pwm) Dc Voltage With A Duty Cycle Fully The Product Adjust From 0%-100%.
- With A Self-Recovery Fuse 2a And A Power-On Led Light.If The Current Is Too Large, It Will Be Automatically Disconnected, And The Fuse Will Automatically Recover After Cooling. Pwm Dc Motor Speed Controller With Switch Function.
- Connect A Voltage Of 1.8v-15v Dc To The Circuit Making Sure Of The Correct Polarity Of The Connection. Note That The Voltage Applied To The Motor Will Be Supply Voltage Applied To The Circuit. It Is Recommended To Add An Appropriately Rated Fuse In Line With The Positive Supply In Order To Protect The Circuit From Any Possible Short Circuits.
- This Is A Speed Governor With A Maximum Current Of 2a. If The Continuous Current Is Greater Than 0.5a, The 775 Motor And The Stroller Motor Will Not Move. Don'T Buy It Wrong. It Is Not Recommended To Supply Power Greater Than 12v, Such As 12v Lead-Acid Batteries, Which May Cause Damage To The Governor.
- See more on Amazon...
Brand: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 inches
See On Amazon #7
Onyehn DC Motor PWM Speed Controller 3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W(Pack of 10pcs)
Asin: B07S8JX5SQ | Model: z002 | PartNumber: z002 | Ean: 8431276576159
Default Disconnection Of Short Circuit Point, Suitable For 5-35V Input. Manually Connect The Short Circuit Point According Your Needs, Suitable For Low Power 3-15V Input..
It Is Not Only To Use For Dc Motor Controls Of The Speed,But Also To Use For Adjust The Led Light..
By Screwing The Potentiometer, You Can Turn Off Power Supply Output. High Voltage And High Current Resettable Fuse, Overcurrent Automatic Disconnection, Power Off For Cooling For A Few Seconds Fuses Automatic Recovery..
Mini Dc 6-35V 5A Pwm Motor Speed Controller. Wide Voltage Dc Motor Speed Controller, Pwm Duty Cycle: 1% -100%..
Features
- Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Mini DC 6-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller, PWM duty cycle: 1% -100%.
- Default disconnection of short circuit point, suitable for 5-35V input. Manually connect the short circuit point according your needs, suitable for low power 3-15v input.
- By screwing the potentiometer, you can turn off power supply output. High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery.
- It is not only to use for dc motor controls of the speed,but also to use for adjust the LED light.
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.79 x 5.91 x 3.94 inches
See On Amazon
Looking For Something Else?
Search