uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07P5YZKY5
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches
See On Amazon Similar To uxcell 8mm to 8mm Bore
#1
uxcell 693ZZ Deep Groove Ball Bearing Double Shield 693-2Z 2080093, 3mm x 8mm x 4mm Carbon Steel Bearings (Pack of 20)
Asin: B07FVYPMPX | Model: a18060900ux0405 | PartNumber: a18060900ux0405
Made From Carbon Steel, Durability And Resistance To Under Heavy Loads.
Same As 693-2Z / 2080093. Pre-Lubricated, Easy To Maintain.
Abec Tolerance 1 (P0) For Most General Use.
Shields On Both Sides Of The Bearing To Keep Dust Out. Suitable For High Speed Operation.
Features
- Size: 693ZZ (Inner Dia.=3mm, Outer Dia.=8mm, Thickness=4mm)
- Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
- Made from Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0) for most general use
- Same As 693-2Z / 2080093. Pre-Lubricated, Easy to maintain
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #2
uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking
Asin: B07M6JSZ7G | Model: a18112900ux0074 | PartNumber: a18112900ux0074
【Material】Made Of High-Carbon Steel, Through Heat Processing, With High Hardness (48-50 Hrc) Drill Bits, And Sharp-Edged Square Chisel, Durable And Lasts Long..
【Operation】Used With Mortise And Tenon Machine With Double Effect, And Electric Drill, Hammer And Other Tools Is Required For Punching Square Hole In Wood. This Drill Bit Cannot Be Used With A Hand Drill. If You Want To Use The Drill Bit With A Drill Press, You Will Need Accessories To Attach To The Drill Press..
【Advantage】With Long Drill Core And Square Chisel, Easy To Lock The Hole On The Wood, Can Reduce Labor Intensity Of Construction Workers, Speed Up The Construction Speed, Reduce Construction Costs..
【Tip And Edge】The Best-Designed Drilling Point Tip And 4 Cutting Corners Enable Fast Drilling With Small Opening Resistance, And Penetrating Into Working Pieces Of Wood In Precise Opening Size Very Smoothly And Fast..
Features
- SIZE 1/2" (12.7mm) square chisel width, 75mm cutting depth, 205mm total length, 9.7mm shank diameter.
- TIP AND EDGE The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast.
- MATERIAL Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel, durable and lasts long.
- ADVANTAGE With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs.
- OPERATION Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood. This drill bit cannot be used with a hand drill. If you want to use the drill bit with a drill press, you will need accessories to attach to the drill press.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.98 x 7.87 x 0.98 Inches | Weight: 0.00 pounds
See On Amazon #3
uxcell 8mm x 100mm 304 Stainless Steel Solid Round Rod for DIY Craft - 5pcs
Asin: B082ZP5CLB | Model: a19102800ux0129 | PartNumber: a19102800ux0129
[ Material ] - High Hardness 304 Stainless Steel, Strong Rust-Resistant And Corrosion-Resistant, Sturdy And Durable..
[ Application ] - Widely Used In Gear Shaft, Motor Shaft, Short Support Shaft, Shaft Pocket Model, Miniature Axle, Model Plane, Model Ship, Model Cars..
[ Feature ] - The Surface Is Smooth, Easy To Shape, No Cracks Formed, Keep Car Normal Operation Efficiently, And Steady Car Body To Overcome Difficulty Easily..
[ Size ] - Diameter: 8Mm/5/16 Inch; Length: 100Mm/3.93 Inch..
Features
- [ Product Contents ] - 5pcs x 304 stainless steel solid round rod lathe bar stock.
- [ Size ] - Diameter: 8mm/5/16 inch; Length: 100mm/3.93 inch.
- [ Material ] - High hardness 304 stainless steel, strong rust-resistant and corrosion-resistant, sturdy and durable.
- [ Feature ] - The surface is smooth, easy to shape, no cracks formed, keep car normal operation efficiently, and steady car body to overcome difficulty easily.
- [ Application ] - Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 5 Pcs 1/4" Quick-Change Hex Shank 7mm Magnetic Nut Setter Driver Drill Bit, 65mm Length, Metric
Asin: B07BNMS93H | Model: a18022800ux0029 | PartNumber: a18022800ux0029
【Material】Heat Treared Chrome Vanadium Steel Construction With Sandblasted Finish For Increased Hardness And Corrosion Resistant..
【Application】Widely Used In Household Diy, Woodworking, Professional Machine Repairing, Etc..
【Magnetic】Magnetic Nut Setter Can Be Be Used With An Impact/Bit Driver Or Hex Socket Ratchet To Securely Grab Nuts And Fasteners For Easy Installation Or Loosening/Removal..
【1/4" Hex Shank】Universal 1/4 Inch Hex Shanks Fit A Variety Of Quick-Change Chucks And Drill, Driver, Or Screwgun..
Features
- Size 7mm nut driver, 65mm (2.5 inch) total length.
- 1/4 Hex Shank Universal 1/4 inch hex shanks fit a variety of quick-change chucks and drill, driver, or screwgun.
- Material Heat treared chrome vanadium steel construction with sandblasted finish for increased hardness and corrosion resistant.
- Magnetic Magnetic nut setter can be be used with an impact/bit driver or hex socket ratchet to securely grab nuts and fasteners for easy installation or loosening/removal.
- Application Widely used in household DIY, woodworking, professional machine repairing, etc.
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 Inches
See On Amazon #5
uxcell 693ZZ Deep Groove Ball Bearings Z2 3mm X 8mm X 4mm Double Shielded Carbon Steel 20pcs
Asin: B0819B49JY | Model: a19082100ux1557 | PartNumber: a19082100ux1557
Made From Carbon Steel, Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 144 Newtons And Dynamic Load Rating Of 474 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
693-2Z Bearings Are Shielded On Both Sides To Keep Lubricant In.
Features
- 693ZZ (I.D.=3mm, O.D.=8mm, Thickness=4mm)
- 693-2Z bearings are Shielded on BOTH SIDES to keep lubricant in
- Made from Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 144 newtons and dynamic load rating of 474 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 2 Pcs 1/4" Quick-Change Hex Shank 10mm Magnetic Nut Setter Driver Drill Bit, 65mm Length, Metric
Asin: B07BNPF2V7 | Model: a18022800ux0035 | PartNumber: a18022800ux0035
【Material】Heat Treared Chrome Vanadium Steel Construction With Sandblasted Finish For Increased Hardness And Corrosion Resistant..
【Application】Widely Used In Household Diy, Woodworking, Professional Machine Repairing, Etc..
【Magnetic】Magnetic Nut Setter Can Be Be Used With An Impact/Bit Driver Or Hex Socket Ratchet To Securely Grab Nuts And Fasteners For Easy Installation Or Loosening/Removal..
【1/4" Hex Shank】Universal 1/4 Inch Hex Shanks Fit A Variety Of Quick-Change Chucks And Drill, Driver, Or Screwgun..
Features
- Size 10mm nut driver, 65mm (2.5 inch) total length.
- 1/4 Hex Shank Universal 1/4 inch hex shanks fit a variety of quick-change chucks and drill, driver, or screwgun.
- Material Heat treared chrome vanadium steel construction with sandblasted finish for increased hardness and corrosion resistant.
- Magnetic Magnetic nut setter can be be used with an impact/bit driver or hex socket ratchet to securely grab nuts and fasteners for easy installation or loosening/removal.
- Application Widely used in household DIY, woodworking, professional machine repairing, etc.
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
See On Amazon #7
uxcell FR8-2RS Flanged Ball Bearing 1/2"x1-1/8"x5/16" Double Sealed Chrome Steel Bearing 4pcs
Asin: B08H27MZJD | Model: a19121700ux0076 | PartNumber: a19121700ux0076
[Easy To Maintain] - Shields On Both Sides To Keep Lubricant In. Z1 Noise Level For Most General Use..
[Note] - Keep The Bearing Working Environment Clean And Bearing Lubricated In Time..
[Application] - Commonly Used For Glider/Rocker Arm, Wheel Of The Cart, Lawnmower, Printers, Fax Machines,Power Tools, And Other Homemade Projects..
[Durable] - Chrome Steel (Gcr15) Races Offer High Hardness And Great Wear Resistance, Thus Extend Bearings' Service Life..
Features
- [Size] - FR8-2RS ABEC-3 bearing (I.D.=1/2", O.D.=1-1/8", Thickness=5/16", Flange Dia:31.1mm).
- [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life.
- [Easy to Maintain] - Shields on Both sides to keep lubricant in. Z1 noise level for most general use.
- [Application] - Commonly used for glider/rocker arm, wheel of the cart, lawnmower, printers, fax machines,power tools, and other homemade projects.
- [Note] - Keep the bearing working environment clean and bearing lubricated in time.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell MR128-2RS Deep Groove Ball Bearings 8mm Inner Dia 12mm OD 3.5mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PPLHLQ | Model: a19092000ux1288 | PartNumber: a19092000ux1288
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 219 Newtons And Dynamic Load Rating Of 462 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr128-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR128-2RS (I.D.=8mm, O.D.=12mm, Thickness=3.5mm)
- mr128-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 219 newtons and dynamic load rating of 462 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.05 pounds
See On Amazon #9
uxcell MR84-2RS Deep Groove Ball Bearings 4mm Inner Dia 8mm OD 3mm Bore Double Sealed Chrome Steel Z2 10pcs
Asin: B082PPQ286 | Model: a19092000ux1235 | PartNumber: a19092000ux1235
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 113 Newtons And Dynamic Load Rating Of 336 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr84-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR84-2RS (I.D.=4mm, O.D.=8mm, Thickness=3mm)
- mr84-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 113 newtons and dynamic load rating of 336 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.02 Pounds
See On Amazon #10
uxcell Glass Shelf Brackets, 10pcs Zinc Alloy Glass Shelf Clamp Pegs Support Clip Shaft Mount for 5-8mm Thickness
Asin: B07L69LF9F | Model: B07L69LF9F | PartNumber: B07L69LF9F
Application: The Glass Shelf Clamp Pegs Are Widely Used In Fixed Glass Or Wood Shelves, Such As Bathroom Glass Shelves, Wine Cabinets, Display Cabinets, Etc. More Suitable For Use In A Dry Indoor Environment..
Package Content: 10 X Glass Shelf Brackets, Including Plastic Screw..
Note: According To The Thickness Of Your Shelf, Select The Clip With The Corresponding Range. In Order To Make The Shelf Holder A Tight Fit, Your Hole Should Be Equal To Or Slightly Smaller Than 5Mm/0.20"..
Feature: Glass Shelf Bracket Pegs Are Zinc Alloy Construction, Corrosion-Resistant, Rustless, And Long-Lasting. With An Adjustable Screw, Can Lock The Glass Firmly. It Is Very Easy To Install And Replace..
Features
- Suitable for: 5-8mm/0.20-0.32" thick; Shaft Dia: 5mmx8mm/0.20"x0.35"(D*L); Dimension: 23x12x12mm/0.90"x0.48"x0.48"(L*W*H)
- Feature: Glass shelf bracket pegs are zinc alloy construction, corrosion-resistant, rustless, and long-lasting. With an adjustable screw, can lock the glass firmly. It is very easy to install and replace.
- Application: The glass shelf clamp pegs are widely used in fixed glass or wood shelves, such as bathroom glass shelves, wine cabinets, display cabinets, etc. More suitable for use in a dry indoor environment.
- NOTE: According to the thickness of your shelf, select the clip with the corresponding range. In order to make the shelf holder a tight fit, your hole should be equal to or slightly smaller than 5mm/0.20.
- Package Content: 10 x Glass Shelf Brackets, including plastic screw.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 3.54 x 3.54 inches
See On Amazon #11
uxcell 688-2RS Deep Groove Ball Bearings 8mm Inner Dia 16mm OD 5mm Bore Double Sealed Chrome Steel Z2 20pcs
Asin: B082PQ3SC4 | Model: a19092000ux1192 | PartNumber: a19092000ux1192
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 474 Newtons And Dynamic Load Rating Of 1064 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
688-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- 688-2RS (I.D.=8mm, O.D.=16mm, Thickness=5mm)
- 688-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 474 newtons and dynamic load rating of 1064 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 1540mm Expand Long 49 x 8 x 0.8mm
Asin: B07MX9G4W4 | Model: a18120800ux0213 | PartNumber: a18120800ux0213
☆ The Drill Press Quill Return Spring Is Good Replacement For Many Existing Quill Spring Drill Presses, This Spring Will Returns The Quill To The Top After You Have Completed Drilling.Used To All Kinds Of Vacuum Cleaner Coil Spring, Volume Tube Coil Spring, And So On..
☆ Pay Attention When Installing Springs. Do Not Loosen The Wire Of Fixed Springs! When Installing, Install The Spring With A Fixed Wire Directly Into The Spring Seat, And The Wire Will Slide Out..
☆ Chemical Blackening, The Performance Of The Product Form Oxide Film, Isolate The Air, Prevent Rust..
Inner Mounting Type : Hook; Outer Mounting Type : Hook，Pack With 1 X Drill Press Spring.
Features
- Expand Length : 1540mm/60.6inch ; Spring OD : 49mm ; Material Width : 8mm ; Material Thickness : 0.8mm
- Inner Mounting Type : Hook; Outer Mounting Type : Hook Pack with 1 x Drill Press Spring
- The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
- Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
- Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.94 x 1.97 inches
See On Amazon #13
uxcell MR85-2RS Deep Groove Ball Bearings 5mm Inner Dia 8mm OD 2.5mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PQ6T21 | Model: a19092000ux1245 | PartNumber: a19092000ux1245
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 72 Newtons And Dynamic Load Rating Of 185 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr85-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR85-2RS (I.D.=5mm, O.D.=8mm, Thickness=2.5mm)
- mr85-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 72 newtons and dynamic load rating of 185 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.01 pounds
See On Amazon #14
uxcell LM8UU Linear Ball Bearings 8mm Bore 15mm OD 24mm Length for CNC Machine 3D Printer 4pcs
Asin: B07H93T58J | Model: a18071300ux0260 | PartNumber: a18071300ux0260
[Features] - These Ball Bearing With Two Rubber Dust Sealed To Prevent Ingress Of Dirt, Water And Foreign Matter.
[Applications] - Mechanical Slides, 2-Axis And 3-Axis Tables, Linear Tables, 3D Printers, Ect..
[Capability] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended Load Is 80% Of Rated Load, Not To Exceed Rated Load.).
[Usage] - Linear Bearings Are Part Of Linear Motion Systems, Often Used In Conjunction With Cylindrical Shafts Or Guideways..
Features
- [SIZE] - Model: LM8UU, 8x15x24mm Metric Double Seal Linear Bearing
- [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways.
- [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter
- [CAPABILITY] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended load is 80% of rated load, not to exceed rated load.)
- [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.51 x 3.94 Inches
See On Amazon #15
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 608ZZ Deep Groove Ball Bearing Double Shield 8mm x 22mm x 7mm High Carbon Steel Z1 Bearings 4pcs
Asin: B07FDYTJS5 | Model: a18051900ux0221 | PartNumber: a18051900ux0221
Made From High Carbon Steel, Durability And Resistance To Under Heavy Loads.
Same As 608Zz / 608-2Z / 80018. Pre-Lubricated, Easy To Maintain.
Abec Tolerance 1 (P0) For Most General Use.
Shields On Both Sides Of The Bearing To Keep Dust Out. Suitable For High Speed Operation.
Features
- Size: 608ZZ (Inner Dia.=8mm, Outer Dia.=22mm, Thickness=7mm)
- Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
- Made from High Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0) for most general use
- Same As 608ZZ / 608-2Z / 80018. Pre-Lubricated, Easy to maintain
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.11 Pounds
See On Amazon #17
uxcell Straight Shank Twist Drill Bits 8mm High Speed Steel 4341 with 8mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CXYXZP | Model: a19102500ux0128 | PartNumber: a19102500ux0128
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 8mm / 0.31"; Shank Diameter : 8mm / 0.31"; Cutting Edge Length: 75mm / 2.95"; Total Length : 115mm / 0.59"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking 2 Pcs
Asin: B07LBR79VJ | Model: a18111700ux0008 | PartNumber: a18111700ux0008
【Material】Made Of High-Carbon Steel, Through Heat Processing, With High Hardness (48-50 Hrc) Drill Bits, And Sharp-Edged Square Chisel..
【Operation】Used With Mortise And Tenon Machine With Double Effect, And Electric Drill, Hammer And Other Tools Is Required For Punching Square Hole In Wood..
【Advantage】With Long Drill Core And Square Chisel, Easy To Lock The Hole On The Wood, Can Reduce Labor Intensity Of Construction Workers, Speed Up The Construction Speed, Reduce Construction Costs..
【Tip And Edge】The Best-Designed Drilling Point Tip And 4 Cutting Corners Enable Fast Drilling With Small Opening Resistance, And Penetrating Into Working Pieces Of Wood In Precise Opening Size Very Smoothly And Fast..
Features
- SIZE 1/2" slotting flute diameter, 75mm cutting depth, 205mm total length.
- TIP AND EDGE The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast.
- MATERIAL Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel.
- ADVANTAGE With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs.
- OPERATION Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.98 x 8.27 x 1.97 inches | Weight: 0.00 pounds
See On Amazon #19
uxcell 6063 Aluminum Round Tube, 300mm Length 17mm OD 8mm Inner Dia Seamless Aluminum Straight Tubing
Asin: B07YCDGRF3 | Model: a19082100ux1108 | PartNumber: a19082100ux1108
[T5 Temper] - T5 Temper With Heat Treated And Artificially Aged For Increasing Strength And Meeting Standard Mechanical Property Requirements..
[Application] - Commonly Used In The Industrial, Ships, Home Furnishing And Other Industries. Great For Custom Fabrication Projects Such As Diy Handmade, Frames, Boat Building, Modelers, Crafts, Gardening Products, Shopfitting, Etc..
[Usage] - It Can Be Processed According To The Length You Need, And Can Be Welded With The Right Equipment..
[Seamless Construction] - The Interior Is Smooth With No Seam And Is Available In An Extruded Structural Or A Drawn Seamless Aluminum Round Tube For Precision Applications..
Features
- [Material] - 6063 aluminum for high strength, weld-ability, corrosion resistance and long-lasting durability.
- [Seamless Construction] - The interior is smooth with no seam and is available in an extruded structural or a drawn seamless aluminum round tube for precision applications.
- [T5 Temper] - T5 temper with heat treated and artificially aged for increasing strength and meeting standard mechanical property requirements.
- [Usage] - It can be processed according to the length you need, and can be welded with the right equipment.
- [Application] - Commonly used in the industrial, ships, home furnishing and other industries. Great for custom fabrication projects such as DIY handmade, frames, boat building, modelers, crafts, gardening products, shopfitting, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search